Structure Synonym Formal Jobs in Usa

Job Summary: Generally responsible for supervision and technical direction over a team of engineers and designers when functioning as a lead engineer. As lead engineer, responsibilities include total delivery of the civil/structural deliverables and services on time, within performance budget and meeting quality expectations. Duties may include performing advanced engineering work serving as a technical specialist for complex engineering assignments. Work at this level requires extensive progressive experience in civil/structural engineering and involves utilization of project controls for cost, schedule and quality of projects. This work will be performed under minimal supervision.

Primary responsibilities will include but not be limited to:

• Reviewing and approving all civil/structural deliverables.
• Validating professional service and construction estimates at the beginning of a project, and then tracking changes as the project progresses.
• Producing professional service estimates in accordance with the department standards for project deliverables, project studies and estimates, change notices and for the development of new work through proposal efforts.
• Establishing the design criteria, incorporating client requirements, estimate and/or scope basis and design basis meeting applicable state, local and federal standards and codes. Ensuring that any requirements for permitting have been established and communicated to the project team.
• Knowing project scope and deliverables. Initiating timely change notices when deviation is made from project scope, affecting schedule, deliverables or cost of the work.
• Planning and organizing the work of your team. Communicating the plan to your team, the project leadership team and the client.
• Maintaining control of the project by tracking and maintaining discipline performance budget progress, schedule commitments, and quality standards. Understanding and utilizing the project tools that are in place for project control.
• Delegating work to engineers and designers in proportion to their technical skills and experience, then following up for support to ensure efficient progress and quality.
• Consulting with design leaders from other disciplines in proportion to their technical skills and experience, then following up for support to ensure efficient progress and quality.
• Producing estimate level preliminary designs and material take-off suitable for the level of estimate being performed on a project.
• Developing conceptual layouts and cost studies as necessary to determine the simplest, most efficient approach to solving engineering tasks at hand.
• Familiarity with and utilizing department design and drafting standards.
• Producing detail design calculations and sketches for materials of construction associated with the project. Calculations produced will be neatly prepared and organized for efficient checking by others and efficient use by drafters/designers for preparing drawings and as a deliverable when required.
• Producing project designs with efficient use of construction materials with an overall emphasis on ease of construction and completed product meeting the expectations of the client.
• Checking calculations made by other engineers to ensure accuracy, conformance to codes, specifications, design criteria and conformance to good engineering practice.
• Producing construction specifications.
• Monitoring drawings in progress to ensure conformance to design calculations and specifications.
• Assisting the drafting group in resolving routine layout and detailing problems. Ensuring that sufficient sketches and details are provided for completion of engineering drawings.
• Reviewing and checking vendor drawings and other discipline drawings for civil/structural input.
• Producing bid packages enabling civil/structural purchase inquiries to be issued for procurement of materials or subcontract pricing.
• Participating in the planning of training programs, continuous education opportunities and professional development of staff.
• Ability to lead small to large size teams in coordinating civil/structural efforts and keeping the team focused on scope, schedule and budget.
• Ability to identify and develop work sharing packages for interoffice execution support. Provide leadership to ensure communication and execution of work within scope, schedule and budget.

This position offers a highly competitive compensation package, including paid time off, health insurance benefits, and matching retirement contributions.

Ideal Background

Education: Bachelor or Master of Science degree in Civil Engineering from an accredited university is required. Structural coursework is required for structural engineering positions.

Registration: Professional SE registration is highly preferred.

Experience: This position requires 15 or more years of relevant industrial experience in civil/structural engineering

Required Knowledge, Skills, and Abilities

• Familiarity with specifications and installation details of construction bulk materials and equipment.
• Ability to create accurate civil/structural documents from the information found on vendor equipment drawings.
• Ability to develop civil/structural specifications.
• Ability to accurately estimate completion of assigned tasks.
• Ability to develop a construction cost estimate, a detailed engineering schedule and a man-hour budget for a small project or an area for a larger project.
• Ability to determine construction material quantities.
• Develop design criteria and scope of work.
• Experienced in estimating and scheduling professional service hours and assessing the progress and quality of civil/structural work.
• Complete understanding of the skills and experience required to perform engineering and design functions.
• Knowledge and application of company engineering design and CAD drafting standards.
• Working knowledge of CAD software, either AutoCAD, Microstation or both.
• Ability to lead teams to deliver on commitments.
• Ability to deliver convincing presentations of Hargrove Engineers & Constructors services.
• Proficient in the use of Microsoft Word, Excel and Outlook.
• Excellent communication skills, both verbal and written.
• Excellent virtual team skills and cross divisional relationships. Leader and promoter of work sharing through interoffice execution.

Physical Requirements

• Ability to sit, stand, or walk for long periods of time.

Pay: $85,000.00 - $125,000.00 per year

Why This Is a Great Opportunity

• Join a high-performing structural engineering team where your work directly shapes real projects and real outcomes
• Own meaningful design responsibilities (not just production) with room to grow your technical and leadership skills
• Work alongside collaborative architects, engineers, and builders who care about quality and doing the right thing
• Competitive compensation with performance-based upside and long-term wealth-building benefits
• Strong people-first benefits that support you and your family (and meaningful time to recharge)

Location: On-site in the Greater Indianapolis, IN area (work closely with the team in-person and stay connected to the full project lifecycle)

Note: Must have hands-on structural design experience for buildings and the ability to produce/calibrate calculations and drawings in a fast-moving design environment.

About Us

We’re a design-forward architecture and engineering team that believes every structure has a story — and that great outcomes come from integrity, collaboration, and strong technical thinking. We’re committed to treating people fairly, building long-term careers, and delivering solutions we’re proud to stamp. Confidential Employer.

Job Description

• Design and engineer building structural systems (steel, concrete, wood, masonry) from concept through construction
• Perform structural analysis and calculations for gravity, lateral, wind, and seismic loads
• Develop clear construction documents and coordinate structural drawings with architects and other disciplines
• Review shop drawings, RFIs, and submittals; support the team through construction administration
• Apply building codes and standards (IBC, ASCE, AISC, ACI, NDS) to create safe, efficient designs
• Collaborate with internal teams and external partners to solve complex field and constructability challenges
• Help improve workflows, standards, and quality control as the team continues to grow

Qualifications

• Bachelor’s degree in Civil Engineering, Structural Engineering, or related field
• 3+ years of structural engineering experience focused on building design
• Working knowledge of building codes and structural design standards
• Experience producing structural calculations and coordinating construction documents
• Proficiency with common structural/design tools (typical: Revit/AutoCAD plus analysis software such as RAM, RISA, ETABS, STAAD, SAP2000, or similar)
• EIT preferred; PE (or actively on the path) strongly preferred
• Strong communication skills, high accountability, and a “solve the problem” mindset

Why You Will Love Working Here

• The team is collaborative, high-integrity, and genuinely invested in doing great work
• You’ll be trusted with real responsibility and supported as you level up
• Clear standards, strong mentorship, and a culture that values quality over chaos
• Benefits that are unusually thoughtful (bonus/profit sharing, retirement, tuition support, paid leave, and recharge time)

JPC-704

Job Type: Full-time

Benefits:

• Dental insurance
• Paid time off
• Vision insurance

Structural Mechanic IV in GAC Brunswick

Unique Skills:

At Gulfstream, our people are at the heart of everything we do. We believe in inspiring and empowering every individual to reach their fullest potential. From workforce development and meaningful connections to a culture of trust, respect, and integrity, we invest in our employees so they can do their best work and achieve success together. Creating and delivering the world's finest aviation experience starts with our people and when our people thrive, so does our mission.

Blueprint reading, process code and fabrication experience, airframe structures and repair work required.

1. Use ability as a skilled specialist to contribute to the development of employees and techniques and completes work in innovative and effective ways .
2. Perform assembly and fitting of detail parts and structures and varied drilling and riveting operations; ensures parts/assembly meet requirements .
3. Use complicated schematics/blueprints, engineering drawings and technical instructions to safely perform layout, fabrication, and installation of parts, equipment or fabricated items on aircraft. Coordinate with supervision and Inspection to ensure compliance with internal and FAA paperwork, sign-offs and quality specifications .
4. Ability to move to new tasks with minimal, short-term impact to established goal hours and schedule .
5. Rivet structural assemblies and parts using all tools required. to do the job (e.g. portable riveting guns, pneumatic drills, counter sinks, rivet shavers, files, reamers, rivets). Must display the ability to remove fasteners without damaging structures .
6. Read work orders, blueprints, lofts, sketches, and operation sheets to determine sequence of operations, type size for rivets, hole pattern for rivets, cutand form plastics and follow standard operating procedures when using adhesives, sealants and solvents .
7. Check all work and ensure a defect free assembly prior to final inspection .
8. Mentor, train, and assist other team members in interpretation of blueprints, drawings, and engineering orders; develop methods and shop aids to resolve production installation difficulties and problems .
9. Maintain and use all logs and records (e.g. MIR sheets, DMTs, Crabs, PCOs) .
10. Align and assembles parts to be riveted using jigs, holding fixtures, pins, clamps, and fasteners .
11. Make repairs per Discrepant Material Tags (DMT), Material Review Request (MRR), Production Change Orders (PCO), performs necessary rework to ensure installations meet conformity .
12. Plan and organize workloads and resource requirements to meet or exceed goal hours and schedule expectations. Assist in overseeing projects or other technicians and assesses requirements of assigned tasks to procure required. materials and documentation for assigned tasks .
13. Maintain a neat and orderly work area, supports the company 5S, Lean Initiative Program, and complies with all safety regulations .
14. Support Lean Activities, comply with all safety, 5S, and housekeeping policies.

1. Good working knowledge of computers and related software.
2. Must be able to read and interpret blue prints.
3. Must be skilled in close tolerance work and have knowledge of use of special tools and equipment. Should be able to use all tools required. to do the job.
4. Must be able to use mathematical formulas by solving dimensional problems using fractions, decimal fractions and whole numbers.
5. Thorough knowledge in the use of multiple measuring devices, demonstrated ability to use within specified tolerance.
6. Must be able to work any shift.
7. Must be able to lift 50 lbs.
8. Must be able to climb ladders, stands, stairs and work in small spaces and/or restricted areas.
9. Must be able to read, write, speak, and understand the English language.

Additional Information

Requisition Number: 231359

Category: Operations

Percentage of Travel: Up to 25%

Shift: Multiple Shifts

Employment Type: Full-time

Posting End Date: 03/23/2026

Equal Opportunity Employer / Individuals with Disabilities / Protected Veterans

Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.

Legal Information Site Utilities Contacts Sitemap
Copyright 2025 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company .

Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft

Structural Mechanic 2 in GAC St. Louis

Unique Skills:

At Gulfstream, our people are at the heart of everything we do. We believe in inspiring and empowering every individual to reach their fullest potential. From workforce development and meaningful connections to a culture of trust, respect, and integrity, we invest in our employees so they can do their best work and achieve success together. Creating and delivering the world's finest aviation experience starts with our people and when our people thrive, so does our mission.

Employee needs to be skilled in sheet metal structures and repairs.

The compensation range for this role is $26.51 - $30.93 per hour.

Final compensation for this role will be determined by several factors including but not limited to: minimum and preferred qualifications, knowledge, skills, abilities, education, experience, and location.

Gulfstream employees benefit from a total rewards package that includes competitive compensation, comprehensive benefits plans, wellness programs, paid leave and tuition assistance. Our U.S. benefits package includes:

• Medical, prescription, dental and vision coverage
• Life and disability insurance
• Retirement savings plan
• Employee assistance plan
• Voluntary programs such as adoption assistance, prepaid legal assistance, home and auto insurance, and accident insurance.

1. Safely perform assembly and fitting of detail parts and structures and varied drilling and riveting operations; ensures parts/assembly meet requirements Safely perform sheetmetal layout, fabrication, and installation of parts, equipment or fabricated items on aircraft .
2. Rivet structural assemblies and parts using all tools required. to do the job (e.g. portable riveting guns, pneumatic guns, pneumatic drills, counter sinks, rivet shavers, files, reamers, rivets). Must display the ability to remove fasteners without damaging structure .
3. Read work orders, blueprints, lofts, sketches and operation sheets to determine sequence of operations, type size and hole pattern for rivets, cut and form plastics and follow standard operating procedures when using adhesives, sealants, and solvents .
4. Check all work and ensure a defective free assembly prior to final inspection .
5. Maintain and use all logs and records (e.g. MIR sheets, DMTs, Crabs, PCOs) .
6. Align and assemble parts to be riveted using jigs, holding fixtures, pins, clamps, and fasteners. Utilizing proper tooling, shape and form complex angles and configurations according to blueprint specifications or written/verbal information .
7. Make repairs per Discrepant Material Tags (DMT), Material Review Request (MRR), Production Change Orders (PCO), performs necessary rework to ensure installations meet conformity .
8. Maintain a neat and orderly work area, supports the company 5S Program, and complies with all safety regulations. Use personal protective equipment as required.
9. Able to work with minimal supervision on duties and tasks .
10. Participate in continuous improvement activities (e.g. YIAW, Kaizen events, etc.) .
11. Properly use and maintain company-provided tools and equipment and returns items to tool room after use .
12. Ensure standard operating procedures are followed when operating ground support equipment .

1. Properly collect and dispose of waste fuel, oil, hydraulic fluids, de-icing fluids, and solvent rags .
2. Ensure accurate daily job charging to the aircraft .
3. Exchange job related information and coordinate work activities between shifts through turn over report meetings and direct contact with leadership .
4. Assist in maintaining shop equipment and associated JSAs .
5. Support Lean Activities .

1. Must be able to read and interpret blue prints.
2. Basic computer skills and basic shop math skills.
3. Must be able to read a scale and perform basic shop math.
4. Read and comprehend basic documents and instructions.
5. Must have essential personal skills, which include an aptitude for hands-on craftwork, a professional attitude, attention to detail, ability to work with people and to meet demanding schedules.
6. Must demonstrate good housekeeping and safety practices.
7. Ability to work with composite resins and materials.
8. Must be able to work any shift.
9. Must be able to climb ladders/stands/stairs and work in small spaces or restricted areas & lift 50 lbs.
10. Must be able to read, write, speak, and understand the English language.

Additional Information

Requisition Number: 231417

Category: Operations

Percentage of Travel: Up to 25%

Shift: First

Employment Type: Full-time

Posting End Date: 04/03/2026

Equal Opportunity Employer / Individuals with Disabilities / Protected Veterans

Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.

Legal Information Site Utilities Contacts Sitemap
Copyright 2025 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company .

Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft

Structural Mechanic III - Sign On Bonus Available in GAC Mesa

Unique Skills:

At Gulfstream, our people are at the heart of everything we do. We believe in inspiring and empowering every individual to reach their fullest potential. From workforce development and meaningful connections to a culture of trust, respect, and integrity, we invest in our employees so they can do their best work and achieve success together. Creating and delivering the world's finest aviation experience starts with our people and when our people thrive, so does our mission.

Heavy structures MOD experience preferred.

1. Safely perform assembly and fitting of detail parts and structures and varied drilling and riveting operations; ensures parts/assembly meet requirements. Safely perform sheetmetal layout, fabrication, and installation of parts, equipment or fabricated items on aircraft .
2. Possess the proven ability to move to new tasks with only a moderate, short-term impact to established goal hours and schedule .
3. Rivet structural members, assemblies and parts using all tools required. to do the job (e.g. portable riveting guns, pneumatic drills, counter sinks, rivet shavers, files, reamers, rivets). Ability to remove fasteners without damaging structures .
4. Read work orders, blueprints, lofts, sketches, and operation sheets to determine sequence of operations, type size and hole pattern for rivets, cut and form plastics and follow standard operating procedures when using adhesives, sealants, and solvents .
5. Check all work and ensure a defective free assembly prior to final inspection .
6. Instruct and assist other team members in interpretation of blueprints, drawings, and engineering orders; develop methods and shop aids to resolve production installation difficulties and problems .
7. Maintain and use all logs and records (e.g. MIR sheets, DMTs, Crabs, PCOs) .
8. Align and assemble parts to be riveted using jigs, holding fixtures, pins, clamps, and fasteners. Utilizing proper tooling, shape and form complex angles and configurations according to blueprint specifications or written/verbal information .
9. Make repairs per Discrepant Material Tags (DMT), Material Review Request (MRR), Production Change Orders (PCO), performs necessary rework to ensure installations meet conformity .
10. Maintain a neat and orderly work area, supports the company 5S & Lean Initiative Program and complies with all safety regulations. Use of personal protective equipment as required.

1. Participate in continuous improvement activities .
2. Properly use and maintain company-provided tools and equipment and returns items to tool room after use .
3. Ensure standard operating procedures are followed when operating ground support equipment .
4. Properly collect and dispose of waste fuel, oil, hydraulic fluids, de-icing fluids, and solvent rags .
5. Ensure accurate daily job charging to the aircraft .
6. Exchange job related information and coordinate work activities between shifts through turn over report meetings and direct contact with leadership .

1. Basic computer and basic shop math skills.
2. Read and comprehend basic documents and instructions and read a scale.
3. Must have essential personal skills and possess aptitude for hands-on craftswork, a professional attitude, attention to detail, ability to work with people and to meet demanding schedules.
4. Must be skilled in close tolerance work and have knowledge of use of special tools and equipment.
5. Ability to work with composite resins and materials.
6. Must be able to work any shift.
7. Must be able to climb ladders, stands, stairs, and work in small spaces or restricted areas & lift 50 lbs.

Additional Information

Requisition Number: 230580

Category: Operations

Percentage of Travel: Up to 25%

Shift: Multiple Shifts

Employment Type: Full-time

Posting End Date: 04/30/2026

Equal Opportunity Employer / Individuals with Disabilities / Protected Veterans

Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.

Legal Information Site Utilities Contacts Sitemap
Copyright 2025 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company .

Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft

Structural Mechanic 4 in GAC Van Nuys

Unique Skills:

At Gulfstream, our people are at the heart of everything we do. We believe in inspiring and empowering every individual to reach their fullest potential. From workforce development and meaningful connections to a culture of trust, respect, and integrity, we invest in our employees so they can do their best work and achieve success together. Creating and delivering the world's finest aviation experience starts with our people and when our people thrive, so does our mission.

Most be able to work any shift.

Most have an extensive knowledge of sheetmetal and structural repairs.

The compensation range for this role is $34.15 - $39.84 per hour.

Final compensation for this role will be determined by several factors including but not limited to: minimum and preferred qualifications, knowledge, skills, abilities, education, experience, and location.

Gulfstream employees benefit from a total rewards package that includes competitive compensation, comprehensive benefits plans, wellness programs, paid leave and tuition assistance. Our U.S. benefits package includes:

• Medical, prescription, dental and vision coverage
• Life and disability insurance
• Retirement savings plan
• Employee assistance plan
• Voluntary programs such as adoption assistance, prepaid legal assistance, home and auto insurance, and accident insurance.

1. Use ability as a skilled specialist to contribute to the development of employees and techniques and completes work in innovative and effective ways .
2. Perform assembly and fitting of detail parts and structures and varied drilling and riveting operations; ensures parts/assembly meet requirements .
3. Use complicated schematics/blueprints, engineering drawings and technical instructions to safely perform layout, fabrication, and installation of parts, equipment or fabricated items on aircraft. Coordinate with supervision and Inspection to ensure compliance with internal and FAA paperwork, sign-offs and quality specifications .
4. Ability to move to new tasks with minimal, short-term impact to established goal hours and schedule .
5. Rivet structural assemblies and parts using all tools required. to do the job (e.g. portable riveting guns, pneumatic drills, counter sinks, rivet shavers, files, reamers, rivets). Must display the ability to remove fasteners without damaging structures .
6. Read work orders, blueprints, lofts, sketches, and operation sheets to determine sequence of operations, type size for rivets, hole pattern for rivets, cutand form plastics and follow standard operating procedures when using adhesives, sealants and solvents .
7. Check all work and ensure a defect free assembly prior to final inspection .
8. Mentor, train, and assist other team members in interpretation of blueprints, drawings, and engineering orders; develop methods and shop aids to resolve production installation difficulties and problems .
9. Maintain and use all logs and records (e.g. MIR sheets, DMTs, Crabs, PCOs) .
10. Align and assembles parts to be riveted using jigs, holding fixtures, pins, clamps, and fasteners .
11. Make repairs per Discrepant Material Tags (DMT), Material Review Request (MRR), Production Change Orders (PCO), performs necessary rework to ensure installations meet conformity .
12. Plan and organize workloads and resource requirements to meet or exceed goal hours and schedule expectations. Assist in overseeing projects or other technicians and assesses requirements of assigned tasks to procure required. materials and documentation for assigned tasks .
13. Maintain a neat and orderly work area, supports the company 5S, Lean Initiative Program, and complies with all safety regulations .
14. Support Lean Activities, comply with all safety, 5S, and housekeeping policies.

1. Good working knowledge of computers and related software.
2. Must be able to read and interpret blue prints.
3. Must be skilled in close tolerance work and have knowledge of use of special tools and equipment. Should be able to use all tools required. to do the job.
4. Must be able to use mathematical formulas by solving dimensional problems using fractions, decimal fractions and whole numbers.
5. Thorough knowledge in the use of multiple measuring devices, demonstrated ability to use within specified tolerance.
6. Must be able to work any shift.
7. Must be able to lift 50 lbs.
8. Must be able to climb ladders, stands, stairs and work in small spaces and/or restricted areas.
9. Must be able to read, write, speak, and understand the English language.

Additional Information

Requisition Number: 230658

Category: Operations

Percentage of Travel: Up to 25%

Shift: First

Employment Type: Full-time

Posting End Date: 03/27/2026

Equal Opportunity Employer / Individuals with Disabilities / Protected Veterans

Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.

Legal Information Site Utilities Contacts Sitemap
Copyright 2025 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company .

Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft

Structural Mechanic 4 (Weekend Day Shift) in GAC St. Louis

Unique Skills:

At Gulfstream, our people are at the heart of everything we do. We believe in inspiring and empowering every individual to reach their fullest potential. From workforce development and meaningful connections to a culture of trust, respect, and integrity, we invest in our employees so they can do their best work and achieve success together. Creating and delivering the world's finest aviation experience starts with our people and when our people thrive, so does our mission.

Candidate must be well trained on using sheet metal structures tooling, understand and interpret structural drawings, and have experience on aircraft structural repairs. This shift is primarily a Weekend Day Shift (Friday-Sunday from 6:00am to 6:30pm), but candidate must be willing to work multiple shifts as required.

The base compensation range for this role is $31.19 - $36.38 per hour.

Final compensation for this role will be determined by several factors including but not limited to: minimum and preferred qualifications, knowledge, skills, abilities, education, experience, and location.

Gulfstream employees benefit from a total rewards package that includes competitive compensation, comprehensive benefits plans, wellness programs, paid leave and tuition assistance. Our U.S. benefits package includes:

• Medical, prescription, dental and vision coverage
• Life and disability insurance
• Retirement savings plan
• Employee assistance plan
• Voluntary programs such as adoption assistance, prepaid legal assistance, home and auto insurance, and accident insurance.

1. Use ability as a skilled specialist to contribute to the development of employees and techniques and completes work in innovative and effective ways .
2. Perform assembly and fitting of detail parts and structures and varied drilling and riveting operations; ensures parts/assembly meet requirements .
3. Use complicated schematics/blueprints, engineering drawings and technical instructions to safely perform layout, fabrication, and installation of parts, equipment or fabricated items on aircraft. Coordinate with supervision and Inspection to ensure compliance with internal and FAA paperwork, sign-offs and quality specifications .
4. Ability to move to new tasks with minimal, short-term impact to established goal hours and schedule .
5. Rivet structural assemblies and parts using all tools required. to do the job (e.g. portable riveting guns, pneumatic drills, counter sinks, rivet shavers, files, reamers, rivets). Must display the ability to remove fasteners without damaging structures .
6. Read work orders, blueprints, lofts, sketches, and operation sheets to determine sequence of operations, type size for rivets, hole pattern for rivets, cutand form plastics and follow standard operating procedures when using adhesives, sealants and solvents .
7. Check all work and ensure a defect free assembly prior to final inspection .
8. Mentor, train, and assist other team members in interpretation of blueprints, drawings, and engineering orders; develop methods and shop aids to resolve production installation difficulties and problems .
9. Maintain and use all logs and records (e.g. MIR sheets, DMTs, Crabs, PCOs) .
10. Align and assembles parts to be riveted using jigs, holding fixtures, pins, clamps, and fasteners .
11. Make repairs per Discrepant Material Tags (DMT), Material Review Request (MRR), Production Change Orders (PCO), performs necessary rework to ensure installations meet conformity .
12. Plan and organize workloads and resource requirements to meet or exceed goal hours and schedule expectations. Assist in overseeing projects or other technicians and assesses requirements of assigned tasks to procure required. materials and documentation for assigned tasks .
13. Maintain a neat and orderly work area, supports the company 5S, Lean Initiative Program, and complies with all safety regulations .
14. Support Lean Activities, comply with all safety, 5S, and housekeeping policies.

1. Good working knowledge of computers and related software.
2. Must be able to read and interpret blue prints.
3. Must be skilled in close tolerance work and have knowledge of use of special tools and equipment. Should be able to use all tools required. to do the job.
4. Must be able to use mathematical formulas by solving dimensional problems using fractions, decimal fractions and whole numbers.
5. Thorough knowledge in the use of multiple measuring devices, demonstrated ability to use within specified tolerance.
6. Must be able to work any shift.
7. Must be able to lift 50 lbs.
8. Must be able to climb ladders, stands, stairs and work in small spaces and/or restricted areas.
9. Must be able to read, write, speak, and understand the English language.

Additional Information

Requisition Number: 229842

Category: Operations

Percentage of Travel: Up to 25%

Shift: Weekend Days

Employment Type: Full-time

Posting End Date: 03/18/2026

Equal Opportunity Employer / Individuals with Disabilities / Protected Veterans

Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.

Legal Information Site Utilities Contacts Sitemap
Copyright 2025 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company .

Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing St. Louis is building the future ‒ creating innovative solutions that will define the next generation of aerospace. We are currently seeking Experienced or SeniorStructural Design Engineers to develop, maintain and modify structural and interior payload system and component designs, using 3-D Computer Aided Design tools and/or other design methods, to provide product definition to other engineering groups, production operations, suppliers and external customers throughout the product lifecycle.

These positions are located in the St. Louis region and support current and emerging aircraft programs as part of the Air Dominance division in Boeing Defense Space and Security(BDS).

Positions will be located at one of the listed locations: Berkeley, MO; Hazelwood, MO; St. Louis, MO; St. Charles, MO; Mascoutah, IL.

Position Responsibilities:

Level 3

• Develop, integrate and document structural and interior payload system requirements to establish the system design

• Develop, maintain and modify structural and interior payload system and component designs, using 3-D Computer Aided Design tools and/or other design methods, to provide product definition to other engineering groups, production operations, suppliers and external customers throughout the product lifecycle

• Perform, integrate analytical and test results to validate and verify systems and components meet requirements and specifications

• Manage supplier development, test and production activities and coordinates with the supplier to optimize the design and achieve program goals

• Develop new design/analysis processes and tools to improve the effectiveness, quality and efficiency of the development effort

• Investigate emerging technologies to develop concepts for future product designs to meet projected requirements

• Work under general direction

Level 4

• Develop, integrate and document structural and interior payload system requirements to establish the system design

• Develop, maintain and modify structural and interior payload system and component designs, using 3-D Computer Aided Design tools and/or other design methods, to provide product definition to other engineering groups, production operations, suppliers and external customers throughout the product lifecycle

• Lead performance, integration and analysis of tests to validate and verify systems and components meet requirements and specifications

• Manage supplier development, test and production activities and coordinates with the supplier to optimize the design and achieve program goals

• Assist with investigation of emerging technologies to develop concepts for future product designs to meet projected requirements

• Work under minimal direction

Basic Qualifications (Required Skills / Experience):

• Bachelor of Science degree in Engineering (with a focus on Mechanical, Civil, Aerospace Aeronautical or Material Sciences)

• Level 3: 5 or more years' related work experience or an equivalent combination of technical education and experience

• Level 4: 9 or more years' related work experience or an equivalent combination of technical education and experience

• Experience using NX / Teamcenter and familiarity with reading 2-D drawings

• This position requires the ability to obtain a US Security Clearance for which the US Government requires US Citizenship as a condition of employment. An interim and/or final U.S. Secret Clearance Post-Start is required.

Preferred Qualifications (Desired Skills / Experience):

• Structural Design experience on military or commercial aircraft

Successful candidates for this job must satisfy the Company's Conflict of Interest (COI) assessment process.

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

The Boeing 401(k) helps you save for your future, with contributions from Boeing that can help you grow your retirement savings. Our best-in-class retirement benefit features:

• Best in class 401(k) plan: we'll match your contributions dollar for dollar, up to 10% of eligible pay with Immediate 100% vesting

• Student Loan Match: The Boeing 401(k) Student Loan Match allows eligible enrolled U.S. employees to have their qualified student loan debt payments counted, along with any match-eligible contributions they make, for purposes of determining the Company Match to employees' Boeing 401(k) accounts.

Pay is based upon candidate experience and qualifications, as well as market and business considerations.

Summary Pay Range:

Level 3: $103,700 - $140,300

Level 4: $126,650 - $171,350

Applications for this position will be accepted until Mar. 25, 2026

Education

Bachelor's Degree or Equivalent Required

Relocation

This position offers relocation based on candidate eligibility.

Security Clearance

This position requires the ability to obtain a U.S. Security Clearance for which the U.S. Government requires U.S. Citizenship. An interim and/or final U.S. Secret Clearance Post-Start is required.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for 1st shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Activate Your Career Today in our Action Recovery Program!

Competitive Pay Rates, Benefits, Flexible Schedules, and Great Company Culture!

Schedule: Fulltime, Monday through Friday 8am to 4:30pm. Want to be on the cutting edge of providing top notch care for individuals with complex support and service needs? Do you enjoy making a difference and working to make the lives of others better? Join our team at New Vitae Wellness and Recovery and discover the possibilities. NVW&R is an equal opportunity employer that promotes a holistic, person-centered, strength based and trauma-informed array of services to lead anyone to a more meaningful and fulfilling life in the community. New Vitae Wellness and Recovery is seeking Structured Day Facilitator to provide "hands-on" personal care assistance and support to clients with Traumatic Brain Injuries, Developmental Disabilities or Autism located in Limeport and Quakertown, PA. Assist the client in the acquisition, improvement and retention of skills necessary to support the individual to live successfully in their own home. Assists and supports clients in activities of daily living (ADLS/IADLS), and structured day program.

The Structured day facilitator I has the responsibility for assessing, planning and implementing structured day services to individuals in the program. This service is primarily provided on a group basis onsite and in the community. Structured day program services include supervision and specific training which may include social skills training sensory/motor development reduction/elimination of maladaptive behavior and preparing the individual for community reintegration (teaching concepts such as compliance, attending, tasks completion, problem solving, safety, money management, etc.).

Minimum Requirements for Structured Day Facilitator:

Required: Be 18 years of age or older

Be free from a medical condition, including drug or alcohol addiction, which would limit direct care staff persons from providing necessary personal care services with reasonable skill and safety.

Education: Required: High School Diploma or GED.

Experience: Required: A minimum of five years' experience working with people with disabilities

Driver's License and Mandatory drug screening & Criminal Background check REQUIRED for all positions. Benefits of joining the New Vitae team:

• Competitive pay starting at $18.00/hr. for those who meet minimum requirements.
• Varied shifts (1st, 2nd, and 3rd) and full/part-time options to match you to a position that fits your lifestyle and helps you achieve work-life balance
• Paid holiday, vacation, sick and personal time off, with accruals beginning the first day of employment; we even celebrate you with a paid day off for your birthday!
• Medical, prescription, dental, and vision coverage
• 401k savings plan for retirement with company match for deposits
• Tuition reimbursement and professional/career development opportunities
• Paid life insurance policy

New Vitae Wellness and Recovery (NVWR) is an equal opportunity employer. We do not discriminate in hiring or employment against any individual on the basis of race, ethnicity, ancestry, color, religion, sex/gender (including pregnancy), national origin, sexual orientation, gender identity or expression, physical or mental disability, medical condition, age, veteran status, military status, marital status, genetic information, citizenship status, unemployment status, political affiliation, or on any other basis or characteristic prohibited by applicable federal, state or local law. NVWR will consider qualified job candidates with criminal histories in a manner consistent with federal, state and local laws. Furthermore, we comply with the laws and regulations set forth by the EEOC.