Stripe Engineer Levels Jobs in Usa

A MISSION WORTHY OF A CAREER! If you're looking for "just a job," then stop reading right now.

But, if you're looking for a long-term federal law enforcement career, one that makes a difference every day to our country and its citizens, then the U.S.

Border Patrol (USBP) would like you to take the first step to becoming an entry level Border Patrol Agent.

USBP is hiring immediately to fill full-time, entry-level, career positions in federal law enforcement where your prior experience in public safety, security, military police or law enforcement may qualify.

Train and work with an elite team of professionals whose camaraderie, pride, and sense of purpose are hallmarks of their daily mission of protecting America.

Now is the time to make your move because, along with excellent base pay, exceptional benefits, and job stability, USBP is offering up to $60,000 in additional incentives (see details below) .

Salary and Benefits Annual base salary for newly appointed BPAs varies per grade, as follows: GL-5/GL-7 $51,632
- $92,219 per year.

Border Patrol Agents are eligible to select from an array of federal employment benefits that include health, dental and other insurance plans, a generous annual and sick leave program, and participation in the Thrift Savings Plan, a retirement plan akin to a traditional ROTH 401(k) offering.
*Recruitment Incentive
* Newly appointed Border Patrol Agents (as defined in 5 CFR 575.102 ) will be eligible for up to $20,000 in incentives.

The first $10,000 will be paid upon successful completion of the Border Patrol Academy, with the remaining $10,000 awarded for accepting a prioritized location such as Sierra Blanca, Presidio, Sanderson, Comstock, Freer or Hebbronville, TX; Lordsburg, NM; or Ajo, AZ.
*Retention Incentive
* Newly appointed Border Patrol Agents may also qualify for up to $40,000 in additional incentives distributed over their first four years.

Duty Locations IMPORTANT NOTICE: Duty assignments available at the time of offer may include the Southwest Border, including prioritized locations.

U.S.

Border Patrol determines duty assignments at the time of offer based on operational needs, which may or may not align with candidates' first-choice preferences.

Relocation may be required.

Duty location impacts pay rates; locality pay for federal law enforcement is higher in some locations than others.

A fully trained BPA may be eligible for up to an additional 25% of base pay per the BPA Pay Reform Act of 2014.

This is a career ladder position with a grade level progression of GL-5, GL-7, GL-9, GS-11, and GS-12.

You will be eligible for a promotion to the next higher grade level (without reapplying) once you successfully complete 52 weeks in each grade level.

Duty Locations: You will be asked to select your preferred location for one of the following mission critical locations: Big Bend Sector Stations
-
*Presidio, Van Horn,
*Sanderson, Alpine,
*Sierra Blanca, Marfa Buffalo Sector Stations
- Wellesley Island Del Rio Sector Stations
- Del Rio, Brackettville,
*Comstock, Eagle Pass North, Eagle Pass South, Carrizo Springs, Uvalde El Paso Sector Stations
- Alamogordo, Clint, Deming, El Paso, Fort Hancock, Las Cruces,
*Lordsburg, Santa Teresa, Ysleta El Centro Sector Stations
- El Centro, Indio, Calexico Grand Forks Sector Stations
- Pembina Havre Sector Stations
- Havre, Malta, Plentywood, Scobey, Sweetgrass Houlton Sector Stations
- Calais, Fort Fairfield, Jackman, Rangeley, Van Buren Laredo Sector Stations
- Laredo South, Cotulla,
*Hebbronville, Laredo West,
*Freer, Laredo North, Zapata Rio Grande Valley Sector Stations
- Rio Grande City, Fort Brown, McAllen, Brownsville, Falfurrias, Weslaco, Kingsville, Harlingen San Diego Sector Stations
- Boulevard, Brownfield, Campo, Chula Vista, Imperial Beach, Murrieta, San Clemente Spokane Sector Stations
- Colville, Curlew, Metaline Falls, Oroville Swanton Sector Stations
- Beecher Falls, Burke, Champlain, Newport, Richford Tucson Sector Stations
-
*Ajo, Tucson, Nogales, Douglas, Brian A Terry, Sonoita, Casa Grande, Three Points Substation, Willcox Yuma Sector Stations
- Blythe, Yuma, Wellton Duties and Responsibilities As a BPA, you will be part of our 60,000 workforce that strives to protect the American people by safeguarding our borders, deterring illicit activity, and enhancing the nation's economic prosperity.

Being a BPA makes you a valuable member of the Federal Law Enforcement Officer (LEO) profession.

Typical assignments include: Detecting and questioning people suspected of violating immigration and custom laws and inspecting documents and possessions to determine citizenship or violations Preventing and apprehending undocumented noncitizens and smugglers of noncitizens at or near the borders by maintaining surveillance from covert positions to include using infrared scopes during night operations Interpreting and following tracks, marks, and other physical evidence of illegal entry of persons or contraband Performing farm checks, building checks, traffic checks, city patrols, and transportation checks Patrolling the international boundary and coastal waterways using a variety of government assets such as vehicles, horses, vessels, watercraft, off-road vehicles, ATVs, snowmobiles, and motorcycles for the accomplishment of the USBP Mission.

Qualifications You qualify for the GL-5 grade level if you possess one of the following: Experience: One (1) year of general work experience that demonstrates the ability to take charge, make sound decisions, and maintain composure in stressful situations; to learn regulations, methods, and techniques through classroom training and/or on-the-job instruction; and the ability to gather concise information through questioning, observation, and examination of documents and records; OR Education Substitution: A bachelor's degree or successful completion of a full four-year course of study in any field leading to a bachelor's degree from an accredited college or university; OR Combination of Experience and Education: A combination of general work experience AND successfully completed college education.

This will be calculated using your resume and official or unofficial transcripts submitted with your application.

You qualify for the GL-7 grade level if you possess one of the following: Experience: One year of specialized work experience that shows you have the skills necessary to: Make sound judgments and decisions in the use of firearms.

Deal effectively with people in a courteous and tactful manner in connection with law enforcement matters.

Analyze information rapidly and make prompt decisions where you will be expected to make arrests after the completion of required training and apply these skills in a law enforcement capacity such as criminal code enforcement, determining violations of laws, correctional or rehabilitation work involving criminal offenders, security, military, etc.

The above experience will be applied in connection with the following: Make arrests and exercise sound judgment in the use of firearms; deal effectively with people in a courteous manner in connection with law enforcement matters; analyze information rapidly and make prompt decisions; or develop and maintain contact with a network of informants.

Education Substitution for the GL-7 grade level: A bachelor's degree with superior academic achievement, which is based on (1) class standing, (2) grade-point average (i.e., GPA of 3.0 or higher out of a possible 4.0), or (3) honor society membership.

Or will receive a bachelor's degree with Superior Academic Achievement.

Or one full year of graduate-level education in a field of study related to law enforcement (e.g., criminal justice, homeland security, justice studies, law enforcement, courts and judicial systems, forensic technology, forensic psychology, or corrections and rehabilitation) from an accredited college or university; OR A Combination of Experience and Education: This will be calculated using your resume and official or unofficial transcripts submitted with your application.

Note: If you have previous or current law enforcement or military law enforcement experience, you may qualify at the GL-9 and or GS-11 grade level.

Please refer to the BPA GL-9
- 11 announcement.

Other Requirements Citizenship : You must be a U.S.

Citizen to apply for this position.

Residency : You must have had primary U.S.

residency (includes protectorates as declared under international law) for at least three of the last five years.

Age Restriction : In accordance with Public Law 100-238, this position is covered under law enforcement retirement provisions.

Candidates must be referred for selection to the Border Patrol Agent position before reaching their 40th birthday in accordance with Department of Homeland Security Directive 251-03.

The age restriction may not apply if you are currently serving or have previously served in a federal civilian law enforcement (non-military) position covered by Title 5 U.S.C.

8336(c) or Title 5 U.S.C.

8412(d).

Veterans' Preference : You may also be eligible for an excepted service Veterans Recruitment Appointment (VRA).

The age restriction does not apply if you are Veterans' Preference eligible.

Formal Training : After you are hired, you will be detailed to the U.S.

Border Patrol Academy in Artesia, New Mexico, for approximately six (6) months of intensive instruction in immigration and nationality laws, law enforcement and USBP-specific operations, driver training, physical techniques, firearms, and other courses.

Border Patrol work requires the ability to speak and read Spanish, as well as English.

Border Patrol Agents will be provided training to become proficient with the Spanish language at the Academy.

How to Apply: Click the Apply button on this site.

You will be linked to the CBP Talent Network registration page.

For Position of Interest, select Border Patrol Agent, then complete the pre-screening questions.

You'll then receive a link(s) to the BPA Job Opening Announcements (JOAs) on USAJOBS, the federal government's official employment site, to complete your application.

Be certain to review ALL details of the job opportunity announcement and follow all instructions in the application process, including items (resume, transcripts, etc.) to submit.

You will be evaluated based on your resume, supporting documents, and the BPA Entrance Exam .

If you have questions about the application process, contact a recruiter through the U.S.

Border Patrol page: /s/usbp .

As a subscriber to the CBP Talent Network, you'll receive monthly emails with information about webinars, career expos, and future opportunities with CBP.

This position will be open until filled

To perform professional and technical engineering work in an assigned area such as plan and development review, contract administration and design; and to provide technical staff assistance to higher level engineering staff.

Position Snapshot/A Day in the Life:

This Associate Engineer position will be within the Traffic Division of the Public Works/Engineering Department. With a team of 11 (7 of whom are primarily responsible for signal operations and maintenance), we are responsible for overseeing the City's transportation system, including supporting Capital Improvements Projects, Land Development projects, Street Maintenance, Planning, and others.

Under the direction of a Senior Engineer or City Traffic Engineer, you will primarily be responsible for reviewing private development and capital improvement project related traffic studies, identifying impacts and deficiencies, and determining the most appropriate improvements and design features needed. Other day-to-day duties will also involve reviewing and preparing signing/striping plans and traffic control plans, investigating and responding to concerns from the general public, and participating in long-range planning activities. You may also be asked to help work on special projects and grant pursuits, preparing staff reports, participating in interagency coordination efforts, preparing RFP's/RFQ's, reviewing and processing proposals/contracts/traffic plans, and conducting various meetings.

Distinguishing Characteristics: This is the journey level class within the Engineering series. Employees within this class are distinguished from the Assistant Civil Engineer by the performance of the full range of duties as assigned. Employees at this level receive only occasional instruction or assistance as new or unusual situations arise and are fully aware of the operating procedures and policies within the work unit. Positions in this class are flexibly staffed and may be filled by advancement from the Assistant level.

Supervision Received and Exercised: Receives direction from higher level engineering staff and may exercise technical supervision over less experienced staff within the work unit and technical or functional supervision over staff within the Department.

The incumbent must have the ability to:

• Review and check residential and commercial building plans or plans related to structures such as streets, sidewalks, gutters and other off-site construction; check plans for conformance with regulations regarding line, grade, size, elevation and location of structures; check calculations
• Maintain records of all plans and contract documents.
• Prepare progress reports on projects under construction; maintain records of changes and field notes.
• Investigate field problems affecting property owners, contractors and maintenance operations.
• Coordinate assigned activities with consultants, engineers, developers, contractors, other city departments and divisions, and with outside agencies.
• Develop plans, specifications and other contract documents.
• Provide technical and professional engineering support services relative to assigned areas of responsibility.
• Prepare special engineering studies and reports; perform special assignments on engineering problems as necessary.
• Plan, prepare and design a variety of engineering projects such as roads, bridges, structures and hydraulics.
• Calculate the quantity, quality and cost of materials used for various projects.
• Review engineering calculations of other engineers or engineering technicians.
• Prepare plans and specifications, maps, deeds and legal descriptions.
• Review plans for traffic signals, traffic signing, and traffic striping for conformance with City policies and State and Federal requirements.
• Plan, prepare, and design a variety of engineering projects, such as traffic signals, traffic striping, and traffic signing.
• Review all permits involving work in public streets; review any and all traffic control plans required due to work in streets.
• Prepare traffic control plans and requirements.
• Communicate clearly and concisely, both orally and in writing.
• Establish and maintain cooperative working relationships with those contacted in the course of work.
• Perform and other tasks or functions that may be deemed necessary to the daily operations of the employer.
  
  

THE ABOVE LIST OF ESSENTIAL FUNCTIONS IS NOT EXHAUSTIVE AND MAY BE SUPPLEMENTED AS NECESSARY BY THE EMPLOYER.

WORKING CONDITIONS:In the performance of daily activities, this position requires prolonged sitting, standing, walking, reaching, twisting, turning, kneeling, and bending; the ability to push, pull, drag and/or lift up to 25 pounds; normal manual dexterity and hand/eye coordination; repetitive hand and wrist movement using a computer keyboard and mouse; corrected vision to normal range; acute hearing; written and oral communication; use of standard office equipment such as computers, telephones, copiers, calculators and facsimiles; frequent contact with other staff and the public; may be exposed to severe weather conditions such as high wind, rain, and other outside conditions.

A combination of experience and training that would provide the required knowledge and abilities is qualifying. The incumbent must have the knowledge of:

• Principles and practices of civil engineering.
• Methods, materials and techniques used in the construction of public works projects.
• Modern developments, current literature and sources of information regarding engineering.
• Principles of advanced mathematics and their application to engineering work.
• Applicable laws and regulatory codes in assigned area of responsibility.

The ideal candidate will have a strong technical background in preparing and reviewing transportation analysis for a range of project scales and being able to interpret the practical implications of the analysis results. They would be familiar with VMT, the current industry trends related to its implementation, and be able to assist the team in managing and updating our Traffic Impact Guidelines. They'll have excellent skills in using Excel and be comfortable working within it to create reliable and flexible tools for day-to-day analysis needs. The Traffic division and the City pursue significant grants and special projects that allow us to grow our infrastructure and capabilities, as well as to implement the best practices in the industry, the ideal candidate would be someone who is knowledgeable about the current trends in the Transportation engineering and planning fields and be able to lead grant pursuit efforts and independently manage such projects along with coordination with stakeholders of competing interests.

Experience: One (1) to two (2) years of increasingly responsible experience in civil engineering.

Preferred Qualifications

• At least two (2) years of experience preparing and reviewing transportation impact analyses for a range of project scales and being able to interpret the practical implications of the analysis results.
• Familiarity with VMT, the current industry trends related to its implementation, and have experience managing and/or updating Traffic Impact Guidelines.
• Advanced proficiency in Microsoft Excel, including building tools for transportation data analysis.
• Experience managing transportation projects and coordinating with internal and external stakeholders with competing interests.
• Experience presenting at public meetings and responding to questions/feedback from elected or appointed officials.
• Traffic Engineering license.

Education: Equivalent to a Bachelor's degree from an accredited college or university with major coursework in civil engineering or a closely related field. Some additional years of experience and specialized training may substitute for some of the educational requirements.

License or Certificate: Possession of, and continuously throughout employment, a valid CA Class "C" Driver's License.

Successful candidates will be required to complete an annual Statement of Economic Interest Form (700 Form) and bi-annual ethics training pursuant to AB 1234.

The City of Fontana has a flexible benefits plan. This plan allows for employees to select benefits based upon their individual needs. Full-time and Classified Part-time employees are eligible for benefits.

Please to view our excellent employee benefit options.

• 
  
  
• High School graduate or equivalent
  
  
• Some college
  
  
• Trade school graduate or Apprenticeship
  
  
• Associate's degree in related field
  
  
• Bachelor's degree in related field
  
  
• Bachelor's degree or higher in non-related field
  
  
• Equivalent to Bachelor's degree in related field
  
  
• Master's degree or higher in related field
  
  
• None of the above
  
  

• 
  
  
• Yes
  
  
• No
  
  

• 
  
  
• Yes
  
  
• No
  
  

Required Question

Description: Professional Engineer – Lead – Traffic Location: Kennewick, WA or Meridian, ID Position Overview : J-U-B ENGINEERS, Inc.

is seeking to hire a Professional Engineer
- Lead
- to work in our successful Kennewick, Washington or Meridian, Idaho office.

Our purpose at J-U-B ENGINEERS, Inc.

(J-U-B) is “Helping Each Other Create Better Communities.” We foster a supportive and team-oriented environment to solve problems that improve society, while providing employees growth opportunities and an expansive benefits package.

We attract and retain the best people because we provide an enriching environment for our employees to build their careers in the communities where they live.

J-U-B offers a clearly defined career path, a sense of belonging, and opportunities for employees to use their talents in a team environment.

We are one of the largest professional engineering companies in the Intermountain West, with over 20 offices across 7 states.

There are ample opportunities to collaborate with other offices on projects, widening your experience and network.

The ideal candidate will play a critical role in supporting the growth of our traffic engineering group, which currently consists of 7 individuals ranging experience from 0 years to 30 years.

This group has consistently grown in its ability to capture and complete quality work and now needs additional engineering experts to grow the traffic engineering practice company wide.

This position reports to the Technical Resources Lead within the Transportation Services Group (TSG).

Technical Roles: Support the growth and development of the technical traffic practice companywide and function as a traffic engineering resource.

Prepare traffic deliverables for local, state, private, and federally funded projects.

Perform quality control/quality assurance for traffic engineering deliverables.

Proficient in or desire to learn the following traffic software: Sidra Vissim Visum HCS Synchro OpenPaths (Cube) Vistro Proficient in or desire to learn: Travel Demand Modeling Signal and Corridor Timing Transportation Master Plans Traffic Impact Studies Maintenance of Traffic (MOT) Traffic Signal Design Illumination Signing and Striping Traffic Safety Analysis Noise Studies Intelligent Transportation Systems (ITS) Planning and Environmental Linkages (PEL) Traffic Group Role: Support strategic planning of traffic group operations.

Mentor and support staff including EIT’s and other transportation project engineers.

Provide technical support and guidance on a variety of traffic projects.

Manage workload and identify workload gaps.

Collaborate with and support design engineers on transportation Projects.

Business Development Role: Support business development pursuits under the direction of the Traffic Discipline Lead .

Requirements: Qualifications: The ideal candidate would possess: Bachelor’s degree in civil engineering.

Professional Engineer with ability to obtain licensure in Utah, Nevada, Idaho, Colorado, and Washington.

10-20 years of progressive traffic engineering experience.

Proven ability to work with others and to manage project schedules and deliverables.

Proven ability to work collaboratively in a team environment, supporting multiple offices and teams.

Strong communication and writing skills.

Salary Range: $120,000
- $145,000 per year, determined by experience.

Benefits: In addition to your competitive salary, J-U-B also offers an extensive benefits package including: Professional development opportunities Bonuses for qualified employees Generous vacation and sick leave package Medical, dental, vision, life, and disability insurance Parental Leave 401(k) with company match, profit sharing Company paid Short Term and Long-Term Disability plans The ability to work in a team-centered, collaborative, and supportive atmosphere J-U-B is an employee-owned firm and offers ownership opportunities after qualified years of service.

The application window will be open through May 19, 2026.

Applications will be reviewed frequently, and interviews may be scheduled throughout the posting period.

See our website for more benefit details: To apply for this position and learn more about J-U-B, please visit Compensation details: 12 Yearly Salary PI3e2e2c22fd15-25448-38687983

Whether youre a born leader, or have earned your stripes through years of experience, you might be just the person were looking forgoal-oriented, team-focused and ready to hit the ground running.

Benefits:

• 4 day work week!
• A passionate environment that supports growth.
• Shift meals provided
• Excellent Hours
• Bonus Program
• Full Health Benefits

As a member of the management team, the Associate Manager assists in providing direction and motivation to the hourly partners, ensuring execution of all positions, chores and responsibilities in order to provide our guests with an exceptional NEWK's Experience and exceptional product quality. This position also helps to protect the brand by maintaining a sanitary, safe, respectful, efficient and quality work environment while effectively managing operational/product costs.This career opportunity is with a independently owned franchise restaurant.

NEWK'S Associate Managerstreat all people with courtesy and respectful attitude. They are reliable, independent thinkers and good decision-makers. They create a culture of empowerment and fun in caring for our guests while ensuring profitability and operational excellence are maintained. The Associate Manager values training and adheres to the NEWKs training systems.

Associate Manager Job Responsibilities:

• Provide direction and motivation to the hourly partners, ensuring execution of all positions, chores and responsibilities in order to provide our guests with an exceptional NEWKs Experience and exceptional product quality
• Help to protect the brand by maintaining a sanitary, safe, respectful, efficient and quality work environment while effectively managing operational/product costs

Apply now online.

• Excellent communications, supervisory, and guest service skills
• Computer literacy; comfortable with Microsoft Office Software
• Must have a valid drivers license and insurance

Our commitment to quality ingredients and customer service begins with every team member. If youre looking for an exciting career in a passionate environment, youve come to the right place.Our success relies on happy guests and happy team members. Exceptional customer service has been our foundation since day one.

The City of Renton is recruiting for a Civil Engineer at the 1 or 2 level to join the Surface Water Engineering section. This is an exciting opportunity to work on projects that improve drainage, reduce stormwater pollutant discharge to creeks, and improving fish habitat. These projects improve public safety and the natural environment of our growing city. Work will consist of delivering design and construction of small- to mid-scale stormwater projects, providing technical reviews for consultants, coordinating with the public and other city departments, and supporting senior engineers on large-scale complex projects. The candidate will have excellent communication and problem-solving skills as well as experience or interest in stormwater management. The selected candidate would be hired in a Civil Engineer 1 or Civil Engineer 2 depending on their qualification and experience.

Working for the City of Renton comes with an excellent

benefits package, including:

• Deferred compensation with the City contributing 3% of the employee's salary.
• VEBA Plan with the City contributing 1% of the employee's salary.
• Medical, dental, vision and life insurance at affordable rates
• Paid leave for vacation, sick, eleven holidays and two "personal" holidays a year
• State of Washington Department of Retirement Systems Public Employee Retirement Systems (PERS) plan enrollment

Salary placement depends on the education, experience, and skill set of the incumbent.

Annual Salary Civil Engineer 1: $102,264 - $124,632

Annual Salary Civil Engineer 2: $112,920 - $137,448

Essential Functions for Civil Engineer 1 and 2

• Participate in the selection of consultants, negotiate consultant agreements, monitor consultant progress and expenditures, manage contract, and provide technical directions to consultants; oversee the work produced by consultants to ensure that consultant deliverables are of high quality, meet the objectives of the project, and conform to applicable standards and regulations.
• Provide project coordination between city project team members, other city departments, outside agencies and other external stakeholders to ensure needs are being met by proposed designs and specifications; ensure proper communication at key intervals.
• Participate in public outreach and community involvement efforts. Compile, review, and/or present information and other materials to City Council and the public.
• Develop, recommend, and update city design standard plans, specifications, ordinances, and operating procedures.
• Represent the department and act as spokesperson on various committees, as assigned, before the public, elected officials, committees, and commissions. When needed, would act as liaison with staff, other departments, agencies, and community groups in the coordination of projects and development of policy.
• Support the implementation of major City policies, including research and provide recommendations as well as administers and maintains agreements and contracts with public agencies and private organizations.
• Contribute to an environment of teamwork and respect.
• Foster a culture of equity and inclusion by recognizing the diverse needs and perspectives of groups and individuals.
• Remain current with relevant technological advancements as it relates to field.
• Maintain regular, reliable, and punctual attendance.,
• Perform related duties as assigned.
• May be assigned to support critical city priorities during emergencies.

In Addition to the above ESSENTIAL FUNCTIONS for Civil Engineer 1 and 2 the Civil Engineer 1 also includes:

• Design small-scale capital construction, transportation, and utility projects; prepare and/or review plans, specifications, cost estimates, and final construction contract bid documents.
• Provide support to acquire required city, county, state, and federal project permits, including state and federal environmental documentation and approvals.
• Provide technical engineering support to project construction team; facilitate communications with the Engineer of Record, and adjacent property and business owners.
• Review architectural and engineering plans and drawings for construction projects ensure compliance with City ordinances and policies with guidance from supervisor or assigned team member; approve plans or indicate deficiencies with corrective action guidelines for small-scale actions or projects.
• Prepare, compile, and analyze calculations and/or statistical and technical information involving assigned engineering specialty including utilities, construction, transportation, and others; review calculations, analyses, and designs of others to ensure conformance with City engineering standards and/or to inform decision making.
• Participate in large-scale engineering plans and studies utilizing staff from within the city or outside consultants as necessary.
• Provide technical support for the management of project grants.
• Assist in the delivery of multiple projects according to goals and expectations set by the associated grants, elected officials, and the public; support project management duties such as developing and monitoring project scope, schedule and budget; coordinates and oversees project teams; develop performance metrics.

• Assist in the management and/or participate in large-scale engineering plans and studies utilizing staff from within the City or outside consultants as necessary; develop timelines, specifications and project objectives; monitor progress and provide periodic reports regarding assigned projects.
• Provide technical support and assist in management of project grants.
• Manage the delivery of multiple small and/or midscale projects according to goals and expectations set by the associated grants, elected officials, and the public; perform project management duties such as developing and monitoring project scope, schedule and budget; coordinates and oversees project teams; develop performance metrics.
• Lead design teams and/or design capital construction, transportation, and utility projects; prepare and/or review plans, specifications, costs estimates, and final construction contract bid documents for small and mid-scale projects and assist with large-scale projects.
• Coordinate the negotiation and acquisition of required property rights.
• Acquire and/or lead effort required city, county, and state permits, including state environmental documentation and approvals; support acquisition of federal project permits including preparation of federal environmental documentation.
• Provide technical engineering support to project construction team; facilitate communications with the Engineer of Record, and adjacent property and business owners; and assist in managing project budget.
• Review architectural and engineering plans and drawings for construction projects ensure compliance with City ordinances and policies; approve plans or indicate deficiencies with corrective action guidelines.
• Prepare, compile, and analyze complex calculations and/or statistical and technical information involving assigned engineering specialty including utilities, construction, transportation and others; review calculations, analyses, and designs of others to ensure conformance with City engineering standards and/or to inform decision making.

Civil Engineer 1 EDUCATION, EXPERIENCE, AND LICENSE REQUIREMENTS:

• Bachelor's degree in Civil Engineering or related field.
• Or minimum 4 years of relevant education and experience
• Valid driver's license.
• Successful passing of a required background check.
• Successful passing of a required driving record check.

Civil Engineer 2 EDUCATION, EXPERIENCE, AND LICENSE REQUIREMENTS:

• Bachelor's degree in Civil Engineering or related field.
• Minimum 2 years of civil engineering experience.
• Or minimum 6 years of relevant education and experience.
• Valid driver's license.
• Successful passing of a required background check.
• Successful passing of a required driving record check.

PHYSICAL DEMANDS:

• Drive to offsite locations to perform essential functions.
• Moving throughout City facilities and buildings.
• Operate a computer and other office equipment.
• Communicate with City employees and residents.
• Lift or move items weighing up to 10 pounds on occasion.

WORK ENVIRONMENT:

• Work is performed in an office environment, and outdoors in all weather conditions occasionally.
• Exposure to high voltage wires, hazardous materials, heights, and noise from equipment.
• Noise level out in the field is moderately loud and noise level in the office is moderately quiet.
• Work evening and/or weekend hours as needed.
• Night meetings may be required.

Approved reasonable accommodation requests will be made to enable individuals with disabilities to perform the essential functions of the job.

Telework Program

The City of Renton supports workers performing in a hybrid capacity (partial telework/in-office) where job responsibilities can be performed remotely. This position may be eligible for a telework arrangement, up to 2 days remote, based on the operational needs of the City and specific Department. Regardless of job title or telework arrangement, City of Renton employees must reside in Washington State and within a reasonable distance to their worksite to respond to workplace reporting requirements.

Accommodation

Individuals needing accommodation in the application, testing, or interview process may contact at least 2 days prior to the need.

Please consider visiting the City of Renton's Career Center for more information about our hiring process, benefits and other useful information. The City of Renton embraces a diverse and inclusive workforce and prides itself on promoting collaboration and teamwork in a positive environment while providing high quality services to the community. For more information about the City of Renton, please visit the following website: Why Renton

The City has adopted an anonymous application process that prevents hiring managers from seeing personal identifiers, including candidates' names, addresses, and other similar information. This eliminates the possibility of unintentional or implicit bias during the screening of applications. For that reason, you will not have the ability to attach any documents to your application, including a cover letter or resume. Please make sure to submit a complete, detailed, and updated job application.

Communication from the City of Renton:

We primarily communicate via e-mail during the application process. E-mails from and/or should be placed on your safe domain list to ensure you receive notifications in a timely manner. As a precaution, you may also want to check your junk e-mail folders. We also communicate via text and encourage you to sign up for text alerts when completing your job application.

Recruitment Process:

The screening process will include a review of minimum qualifications and applicants selected for an interview will be invited via email to self-schedule a time through the Government Jobs account. At minimum, this position will be subject to a standard criminal background check and professional reference check. This position requires driving and is also subject to a driving record check from the WA State Dept of Licensing (or other state equivalent). Driving records will be evaluated based on a points system depending on the infraction and severity.

MEP Electrical Engineer and Senior MEP Electrical Engineer

New York City, NY or San Francisco, CA

Permanent, Full Time

HC Solutions Group is partnering with a nationally recognized MEP consulting engineering firm with offices in New York City and San Francisco to identify an Electrical Engineer, and a Senior Electrical Engineer to join their growing team (position can office from either location). This client is a design driven firm known for delivering high performance, sustainable, and architecturally significant projects across diverse building types.

Both roles offer the opportunity to work on complex, innovative building systems from schematic design through construction administration in a collaborative, principal led environment.

About the Role

The MEP Electrical Engineer and Senior MEP Electrical Engineer will be responsible for the design, documentation, and coordination of electrical building systems for commercial, institutional, and mixed use projects. These professionals will collaborate closely with architects, owners, and multidisciplinary MEP teams to deliver technically sound and constructible solutions.

The Senior MEP Electrical Engineer will take on expanded technical leadership, detailed system design responsibility, and mentorship of junior staff.

Key Responsibilities

Responsibilities for both roles include:

• Conceptualize electrical systems and communicate design strategies to clients and stakeholders

• Develop high quality construction documents and technical specifications

• Perform engineering calculations including load analysis, short circuit studies, voltage drop, feeder sizing, generator sizing, and lighting power density

• Design emergency power systems and prepare associated documentation

• Prepare building assessments and due diligence reports outlining existing conditions and system recommendations

• Participate in construction administration including field observations, contractor coordination, submittal review, RFIs, punch lists, and cost review

• Coordinate with internal MEP disciplines and external consultants

• Build and maintain strong client relationships

Additional responsibilities for the Senior MEP Electrical Engineer:

• Prepare detailed power one line diagrams, grounding diagrams, fire alarm layouts, lighting control systems, and complex distribution systems

• Lead project teams and manage electrical scope across multiple phases

• Mentor and develop junior engineers and designers

• Serve as a technical resource for complex code interpretation and system design decisions

Qualifications

MEP Electrical Engineer

• Bachelor’s Degree in Electrical Engineering or Architectural Engineering

• Minimum 3+ years of experience in MEP building design

• Experience across multiple project phases from schematic design through construction administration

• Proficiency in Revit, AutoCAD, and Microsoft Office

• Strong knowledge of NEC, NFPA codes, and applicable building codes

• Experience with engineering calculations and energy compliance documentation

• LEED Accreditation preferred

Senior MEP Electrical Engineer

• Bachelor’s Degree in Electrical Engineering or Architectural Engineering

• 6 to 10 years of experience in the MEP buildings industry

• Licensed Professional Engineer preferred or required depending on project responsibility

• Demonstrated experience leading electrical system design for complex projects

• Advanced knowledge of NEC, NFPA, and applicable state and local codes

• Strong construction administration experience including submittal review and field coordination

All candidates must be legally authorized to work in the United States without current or future sponsorship.

Key Competencies

• Experience with diverse building types including commercial, institutional, and high performance facilities

• Strong verbal and written communication skills

• Desire to grow into or continue in project management leadership roles

• Creative problem solving and analytical thinking

• Commitment to sustainable and high performance building design

Why Consider This Opportunity

• Offices in both New York City and San Francisco

• Work on architecturally significant and sustainable projects

• Collaborative, principal involved leadership structure

• Strong technical mentorship and professional development

• Exposure to high profile clients and complex design challenges

If you are an MEP Electrical Engineer or Senior MEP Electrical Engineer seeking an opportunity in New York City or San Francisco with a top tier consulting engineering firm, we would welcome the opportunity to speak with you.

Apply today to learn more about these openings!

Overview

Georgia Tech prides itself on its technological resources, collaborations, high-quality student body, and its commitment to building an outstanding and diverse community of learning, discovery, and creation. We strongly encourage applicants whose values align with our institutional values, as outlined in our Strategic Plan. These values include academic excellence, diversity of thought and experience, inquiry and innovation, collaboration and community, and ethical behavior and stewardship. Georgia Tech has policies to promote a healthy work-life balance and is aware that attracting faculty may require meeting the needs of two careers.

About Georgia Tech

Georgia Tech is a top-ranked public research university situated in the heart of Atlanta, a diverse and vibrant city with numerous economic and cultural strengths. The Institute serves more than 45,000 students through top-ranked undergraduate, graduate, and executive programs in engineering, computing, science, business, design, and liberal arts. Georgia Tech's faculty attracted more than $1.4 billion in research awards this past year in fields ranging from biomedical technology to artificial intelligence, energy, sustainability, semiconductors, neuroscience, and national security. Georgia Tech ranks among the nation's top 20 universities for research and development spending and No. 1 among institutions without a medical school.

Georgia Tech's Mission and Values

Georgia Tech's mission is to develop leaders who advance technology and improve the human condition. The Institute has nine key values that are foundational to everything we do:

Students are our top priority.
We strive for excellence.
We thrive on diversity.
We celebrate collaboration.
We champion innovation.
We safeguard freedom of inquiry and expression.
We nurture the wellbeing of our community.
We act ethically.
We are responsible stewards.

Over the next decade, Georgia Tech will become an example of inclusive innovation, a leading technological research university of unmatched scale, relentlessly committed to serving the public good; breaking new ground in addressing the biggest local, national, and global challenges and opportunities of our time; making technology broadly accessible; and developing exceptional, principled leaders from all backgrounds ready to produce novel ideas and create solutions with real human impact.

About the College of Computing at the Georgia Institute of Technology

The College of Computing has been a leader in defining modern computing as a paradigm that combines the foundations of theoretical mathematics and information science, the force of invention in computational systems and processes, and interdisciplinary practice that integrates innovation in computing with all facets of life. Today, the college comprises five schools that offer unique academic programs and conduct research specifically related to their concentration areas: Computer Science, Computing Instruction, Cybersecurity and Privacy, Interactive Computing, and Computational Science and Engineering.

The Team

The Center for Scientific Software Engineering (CSSE) is focused on the development and dissemination of software engineering best practices to accelerate both the quality and pace of scientific discovery at Georgia Tech and throughout the scientific community.

Atlanta, GA

The School of Computational Science and Engineering (CSE) at GA Tech is seeking to hire a Research Engineer (Open Rank) to serve as a Product Manager. CSE is enhancing our impact on the Georgia Tech ecosystem through new programs that help students become better Research Software Engineers. With this increased capacity, we will amplify the impact of research conducted by Georgia Tech's scientific community. We are expanding our team of 6 professional software engineers (with varying degrees of industry experience) to include a Product Manager who is excited about working in a highly dynamic and research-oriented environment.

This is a hybrid working position.

• Partner with Georgia Tech faculty to identify areas of scientific research likely to benefit from dedicated Research Software Engineering.
• Establish goals and requirements to create new functionality that maximize Research Software Engineering contributions.
• Pair students with Research Software Engineering mentors in the Center for Scientific Software Engineering.
• Partner with student Research Software Engineers to create development plans that deliver agreed-upon functionality.
• Monitor the progress of student Research Software Engineers as they embark on established development plans.
• Refine CSSE team processes to achieve our collective goals more efficiently.
  

This position vacancy is an open rank announcement. Final job offer will be dependent on candidate qualifications in alignment with Research Faculty Georgia Tech Faculty Handbook (faculty-handbook/3.2.1-research-faculty-hiring-and-promotion-guidelines)

Research Engineer I

Bachelor's degree

Research Engineer II

• Three (3) years of relevant full-time experience after completion of Master's or
• Five (5) years of relevant full-time experience after completion of Bachelor's or
• Doctoral Degree

Senior Research Engineer

• Master's degree with seven (7) years of relevant full-time experience after completion of that degree, or
• Master's degree with nine (9) years of relevant full-time experience after completion of a Bachelor's degree, or
• Doctoral degree with four (4) years of relevant full-time experience after completion of a Bachelor's degree

Principal Research Engineer

• Master's degree with Eleven (11) years of relevant full-time experience or
• Doctoral degree with Seven (7) years of relevant full-time experience after completion of a Bachelor's degree
• One (1) year of relevant full-time experience
• Experience in Data Science, Network Science, Algorithms, Machine Learning and AI.

• Bachelor's Degree in Computer Science, Electrical Engineering, a STEM-related field, or equivalent practical experience.
• Minimum of 4 years of experience in product management.
• Experience working with open-source software and open-source communities.
• Experience collaborating with research stakeholders in academic or industry settings.
• Proven ability to create clear and compelling software specification documents.
• Experience working closely with software engineers to define feature scope and development estimates.
• Strong product thinking, with the ability to synthesize information quickly and take decisive action.
• Empathy for users and experience engaging with customers and stakeholders to understand their needs.
• Ability to prioritize effectively in environments with limited resources, ambiguity, or competing demands.
• Strong interpersonal skills and the ability to build positive, collaborative relationships.
• Clear and compelling communication skills, both verbal and written.
• Understanding of the software development lifecycle and its various phases.
• Awareness of opportunities and challenges associated with Generative AI technologies.

Requests for information may be directed to Dr. Dave Brownell: .

The University System of Georgia is comprised of our 26 institutions of higher education and learning as well as the System Office. Our USG Statement of Core Values are Integrity, Excellence, Accountability, and Respect. These values serve as the foundation for all that we do as an organization, and each USG community member is responsible for demonstrating and upholding these standards. More details on the USG Statement of Core Values and Code of Conduct are available in USG Board Policy 8.2.18.1.2 and can be found on-line at policymanual/section8/C224/#p8.2.18_personnel_conduct.

Additionally, USG supports Freedom of Expression as stated in Board Policy 6.5 Freedom of Expression and Academic Freedom found on-line at policymanual/section6/C2653.

The Georgia Institute of Technology (Georgia Tech) is an Equal Employment Opportunity Employer. The Institute is committed to maintaining a fair and respectful environment for all. To that end, and in accordance with federal and state law, Board of Regents policy, and Institute policy, Georgia Tech provides equal opportunity to all faculty, staff, students, and all other members of the Georgia Tech community, including applicants for admission and/or employment, contractors, volunteers, and participants in institutional programs, activities, or services. Georgia Tech complies with all applicable laws and regulations governing equal opportunity in the workplace and in educational activities.

Equal opportunity and decisions based on merit are fundamental values of the University System of Georgia ("USG") and Georgia Tech. Georgia Tech prohibits discrimination, including discriminatory harassment, on the basis of an individual's race, ethnicity, ancestry, color, religion, sex (including pregnancy), national origin, age, disability, genetics, or veteran status in its programs, activities, employment, and admissions. Further, Georgia Tech prohibits citizenship status, immigration status, and national origin discrimination in hiring, firing, and recruitment, except where such restrictions are required in order to comply with law, regulation, executive order, or Attorney General directive, or where they are required by Federal, State, or local government contract.

This is not a supervisory position.
This position does not have any financial responsibilities.
This position will not be required to drive.
This role is not considered a position of trust.
This position does not require a purchasing card (P-Card).
This position will not travel
This position does not require security clearance.

CENTER FOR SCIENTIFIC SOFTWARE ENGINEERING

The Center for Scientific Software Engineering (SSE) at Georgia Tech (one of the four inaugural Virtual Institute for Scientific Software centers) supports the development of better quality, more sustainable scientific software. To achieve this goal, the Center:

• Creates custom software solutions in partnership with scientific researchers.
• Provides guidance on state-of-the-art tools, technology, and techniques.
• Encourages best practices in open science and the open-source software that supports it.
• Creates and supports long-term scientific platforms and systems.
• Educates students as they create software solutions and develop their software engineering skills.
  

OPPORTUNITY

You are a good fit for this team if you have the following.

• Desire to participate in an exceptional team that pushes the boundaries of science and software.
• Desire to learn, grow, coach, and be coached.
• Ability to learn new concepts across different scientific domains.
• Ability to lead and contribute with a clear understanding of your capabilities and areas for growth.
• Positive, open, and team-oriented approach to work.
• Entrepreneurial drive and ability to thrive in open-ended environments.

The candidate of choice will be required to pass a pre-employment background screening. employment/pre-employment-screening.

• 
  
• Design / Engineering
  
  • 
    
  • Assists Senior Engineers in design documents for SCADA/Automation projects
    
    • 
      
    • Developing design document narratives
      
    • Perform requirements analysis
      
    • Understanding of Sequence of Operations (SOO) / System Functional Documentation
      
    • Create Subsystem Designs (CAD / Panels / Layouts / Wiring / SCADA Screens / Hardware / Communications)
      
    • Comment Resolution
      
    
    
    
  • Reviews and comments on 3rd party design documents for SCADA/Automation projects in support of large programs/projects
    
    • 
      
    • Review design document narratives
      
    • Perform execution and design scope gap analysis
      
    • Review Sequence of Operations / System Functional Documentation to ensure compliance with project requirements
      
    • Review Subsystem Designs (CAD / Panels / Layouts / Wiring / SCADA Screens / Hardware / Communications) for project compliance
      
    • Assist in reviewing project specifications
      
    • Assist in creation of testing plans and procedures for Integrated Systems Factory Testing
      
    
    
    
  
  
  
• Programming
  
  • 
    
  • Program / configure / troubleshoot Controllers, PLCs, RTUs, and/or HMI systems
    
  
  
  
• Testing / Troubleshooting / Deployment / Commissioning
  
  • 
    
  • Assist senior engineers in creating and updating testing and commissioning procedures
    
  • Preparation of test reports
    
  • Originates test procedures
    
  • Commissioning of deployed systems
    
  • Development of test equipment and simulation devices
    
  • Perform Factory and Field Testing
    
  
  
  
• Maintenance
  
  • 
    
  • Perform troubleshooting on service calls to existing and legacy system operators
    
  • Perform hardware / software upgrades and replacements on existing systems
    
  
  
  

• 
  
• Estimates
  
  • 
    
  • Assists senior engineers in preparation of cost estimates and supporting documentation
    
  • Work with relevant stakeholders to review scope of project
    
  • Conduct any surveys, inspections, tours, etc. of client sites, as required
    
  • Assists senior engineers in evaluation and pricing of change orders from vendors
    
  
  
  
• Personnel Management
  
  • 
    
  • Assigns tasks and coordinates with Technical Staff
    
  • Provides technical direction and on-the-job training to drafters, engineering technicians, and less experienced engineers.
    
  
  
  

• 
  
• Bachelor degree in electrical or mechanical engineering and 2-5 years field experience
  
• Associate degree in the electrical or mechanical field (add 3 years field experience)
  
• High school diploma (add 5 years field experience)
  
• 2-5 years' experience with designing and servicing controls systems for switchgear, substations, metering and SCADA/Fault Data/SER/Integration-Automation equipment installation and testing
  
• Experience in reading electrical and control schematics
  
• Experience in electrical power monitoring systems (EPMS) startup, configuration, and calibration
  
• Experience in testing and troubleshooting control and protection systems
  
• Experience using basic electrical and hand tools
  
• Experience using testing, calibration, or industry-specific tools and software
  
• Experience testing, reading/verifying all voltage and current inputs to relays; verifying all metering (local and SCADA); calibrating all relays; trip testing (local and SCADA); verifying all alarms (local and SCADA); verifying all alarms (local and SCADA); verifying all function switches, etc.
  
• Experience with 3 phase power systems; power system protection & control schemes; test equipment; test equipment software
  
• MUST BE A US CITIZEN
  

• 
  
• Experience in OT and IT networking technologies and topologies
  
• Experience troubleshooting and diagnosing OT and IT networks and protocols
  
• Experience in CAD/CAE Software (Visio, AutoCAD)
  
• Experience in schedule management software (Project, Primavera P6)
  
• Standard Office Software (Microsoft Word, Excel, Access etc.)
  

• 
  
• Required Certifications
  
  • 
    
  • Certification in one or more PLC / Automation Platform, such as: Niagara N4, Schneider Power Monitoring, Rockwell, Siemens, JCI, Eaton Foreseer, etc.
    
  • Certification in one or more SCADA platforms, such as: Iconics, Ignition, Aveva, etc.
    
  
  
  
• Preferred Licenses / Certifications
  
  • 
    
  • Design Build Institute of America (DBIA)
    
  • Certified SCADA Security Architect (CSSA)
    
  • Certified Automation Professional (CAP)
    
  
  
  

• 
  
• While performing the duties of this job, the employee is regularly exposed to computer screens for an extended period of time; Sitting for extended periods of time; Reach by extending hands or arms in any direction; Have finger dexterity in order to manipulate objects with fingers rather than whole hands or arms, for example, using a keyboard; Listen to and understand information and ideas presented through spoken words and sentences; Communicate information and ideas in speaking so others will understand; Read and understand information and ideas presented in writing; Apply general rules to specific problems to produce answers that make sense; Identify and understand the speech of another person.
  

Location: Auburn Hills, MI

Position: Long Term Contract (Possible Extension)

Title: 26-00326 - Manufacturing Process Engineer – BIW / General Assembly (Bilingual Spanish & English Required)

Job Description:

• Vehicle Process Engineer Specialist (Toluca Vehicles) will create, updating and maintenance of process documents that affect the current and new vehicle program(s) project(s) and includes working in different process areas BIW and General Assembly.

Responsibilities:

• Vehicle Process Engineer must be able to perform studies for assembly processes, process documents creation includes graphics & illustrations of the parts to be assembled and its development contains the identification of assembly risks through the use and implementation of Process Failure Mode and Effects Analysis (PFMEA) on current and new products. The previous activities includes the sequence analysis to install parts, the implementation of product and parts engineering specifications, process tools specifications, digital process simulation studies and interferences analysis related to current and new products parts and assemblies, as well as any other study related to required process, it will be performed under the acknowledgment and use of the following software applications: Teamcenter 11, Siemens NX (NX Unigraphics software), Mockup and Vis-Professional Version 14.1 visualizers, MS Visio 2016, Autodesk DWG TrueView 2019, MS PowerPoint and MS Office 2016, Snipping Tool Version 10, AMPS - Advanced Manufacturing Planning Systems (Client Internal System). These computer software applications will be used to define process and identify in advance any potential process risk with the use of PFMEA technique to ensure the correct integration of processes on time, in a safety matter and in accordance with product specifications.
• As part of Process Failure Mode and Effects Analysis (PFMEA) development, Vehicle Process Engineer will generate the initial list of PFMEAs to be carried out according to the new processes requirements. The definition of PFMEAs will be performed in mutual agreement with VPE Cars, WPI (Work Process Integration) and plant team members. Once the matrix of PFMEAs to be generated has been defined, Process Engineer will be responsible to schedule meetings in mutual agreement with VPE and plant, develop and lead the PFMEAs. For the creation of PFMEA it will be required to populate the process steps on the PFMEA form provided by VPE Cars /WPI, which includes process steps, identifying potential process risks, establishment of severity, occurrence and detection values, establishment of recommended actions, assignment of responsible for each created recommended action, creation of summary reports after each PFMEA review and document posting into WPI web. It also includes the follow-up of open recommended actions with responsible(s) up to which all the actions will be closed as well.
• Vehicle Process Engineer will be responsible to perform the new and update process documents for the current and new vehicle product programs produced by Toluca Plant, it includes all product parts end items, parts change last level released by product engineering that may affect the process(es) and the inclusion of the changes into the processes should be done considering the product implementation date specified in the engineering change Vehicle Process Engineer will be able to understand the product specifications included in the Engineering Bill of Material (EBOM) system, Product Change Notes (CNs) and Engineering Bulletins.
• It is expected after being familiar with the product specifications, Client systems use and process document requirements that the Vehicle Process Engineer will develop a new process page under the rate of 30 minutes and meet the quality required. If the process or PFMEA's documents performed by Vehicle Process Engineer contain mistakes or missing information, the time used to fix the errors and meet the quality requirements will be covered by Engineering Services.
• Vehicle Process Engineer will provide these services considering performing in the different process areas BIW and GA process areas, work under pressure, availability to travel, assistance on weekends and sometime holidays.
• Vehicle Process Engineer is responsible to keep the information managed updated, control the changes, and manage the process documents assigned as well as have them available into the corresponding systems indicated in accordance with the vehicle(s) program(s) needs established by IME/ME. The confidentiality of the documents generated must be maintained across all the vehicle programs and assigned projects.
• Assist the VPE Cars engineers in the generation of process documents, graphics and PFMEAs, as well as during the revision and updating of these documents.
• Support to VPE Cars engineers in the presentation required to identify the process and product changes related or any activity related to new models as well as to current vehicles (carry over).
• Assist to obtain the product specification, parts and plant information required by VPE Cars Process in order to develop the process documents, Graphics, PFMEA's and tasks needed due to product changes, plant request to improve or update the process documents during the implementation of new and carry over vehicles. The supplier personnel should follow the confidentiality policy.
• Engineering services must be following the official Mexican norms and regulations applicable to the processes safety, environmental that are considered into Product Specifications (Process Standards, Material Standards and Quality MQAS Mexico Client during the work assigned to supplier in the process areas and the plant location.
• Support parts and vehicle(s) model data finding in Teamcenter requested by IME in order to develop and update the new and current process documents, graphics and PFMEA's.
• Assist to obtain information to develop and follow up vehicle(s) KPI's, create weekly reports and support any task related to process documents, it will be performed using forms and tools from VPE and Program Vehicle(s) Management.

Requirements:

• Teamcenter 14
• Siemens NX
• VisPro 14.1
• AutoCAD
• MS Visio
• MS Office / PowerPoint
• AMPS Client
• PFMEA basic template
• EBOM Client
• CN's Client

Education / Training:

• Engineering Degree Required
• Speak and Write Spanish and English
• 2 years as minimum experience in manufacturing process, operation plants, a variety of manufacturing engineering.

Job Title: Lead Manufacturing Engineer (Relocation Assistance)

Location: Coachella, CA

Direct Hire

Salary: 83,899 - $115,000 per year

Industry: Aerospace

Job Summary

The Lead Manufacturing Engineer is a key member of the Engineering group, taking ownership for production activities in an assigned area. They support the Program Engineer in driving activities in the area to ensure that program objectives and metrics are met. On this team, the Lead Manufacturing Engineer is the main point of contact within their assigned area for all technical activity and ensures that required engineering activity to support the area is identified, prioritized, and completed. Additionally, the Lead Manufacturing Engineer ensures that any required maintenance and repair activities within the area are sufficiently specified to enable our Maintenance and Repair organization to quickly and satisfactorily maintain our equipment and processes. Lead Manufacturing Engineers may serve as the engineering representatives to the program team when the Program Engineer is not available.

Primary Responsibilities

• Identify, define, and coordinate key technical efforts that are needed to support the area. Coordinate with Program Engineer and other Lead Manufacturing Engineers to leverage additional engineering support staff as needed to accomplish required technical work.
• Serve as backup for the Program Engineer on the Integrated Product Team consisting of Program Management, Engineering, Quality, Production, and Maintenance
• Regularly collect and communicate status of technical activities within the program team, and to outside leadership as needed.
• Perform and/or guide troubleshooting and failure analysis on product, process, and equipment issues as needed to help expedite return to operation activities, and identify any necessary changes to prevent issue recurrence.
• Analyze production performance metrics and trends to identify key performance parameters, and identify potential improvement and risk areas.
• Define required maintenance schedules and develop operation and maintenance procedures to help ensure proper and continued operation of the production system.
• Review and audit production operation and maintenance procedures to ensure adequacy.
• Develop and manage project plans
• Provide inputs on new product and process design by developing new process performance requirements, analyzing product and process design in order to meet requirements, and supporting transition of products into manufacturing in their area
• Interface with internal and external customers on technical issues.
• Mentor direct reports in engineering best practices and establish and execute plans for the personal development and advancement of engineering direct reports.
• Maintain the highest ethical standards, even when challenged from above
• Understand and live by client’s ethics and business conduct policies

Education/Previous Experience Requirements

• Must be authorized to work in the U.S.
• To conform to U.S. export control regulations, applicant should be eligible for any required authorization from the U.S. Government

Qualifications

• Minimum 4-year degree in engineering or science discipline, such as mechanical / chemical engineering, aerospace engineering, or chemistry / materials science.
• 3+ years of engineering experience in a production environment.
• In-depth knowledge of process engineering disciplines, including lean methods of process flow control, and statistical process control.
• Strong analytical & problem solving skills, and ability to use statistical tools and techniques.
• Experience with product testing and verification methods, including experience with statistical design of experiment.
• Excellent written and verbal communication and presentation skills required.
• Must be dependable, responsible, and detail oriented and have the ability to deal with people effectively.
• Requires self-direction and ability/willingness to prioritize and take initiative

Competencies

• Demonstrate ability in the client's competencies as an employee: customer focus, ethics and values, problem solving, integrity and trust, functional/technical skills, listening, action-oriented, composure and values diversity.

Work Hours & Travel

4/10 workweek