Solid Surface Fabricators Near, ME Jobs in Usa

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airlines is excited to offer opportunities for a Sealer Aircraft Integral Fuel Tank Components to join our Joint and Installation team in Everett and Renton , Washington .

As a Sealer for Aircraft Integral Fuel Tank Components, you will play a vital role in ensuring the highest standards of quality and safety in the sealing and assembly processes. Your responsibilities will include working from blueprints and specifications to clean surfaces, apply sealants, and prepare fuel vents for leak tests. You will also perform necessary rework and apply corrosion preventative seals to maintain the integrity of fuel tank components. Attention to detail is essential as you assist with pressure testing operations and coordinate effectively with supervisors and team members to ensure seamless communication across shifts.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.

Position Responsibilities:

• Work from blueprints, documents, standards, and other required specifications to complete assigned tasks.
• Obtain daily work assignments from the team leader or supervisor and read Installation Plans and applicable drawings to determine work areas.
• Select appropriate cleaning solvents and clean interior and exterior surfaces prior to sealing.
• Load sealing guns and clean sealing equipment, ensuring proper functionality.
• Hand mix sealant as required and perform rework or pickups on assigned assemblies.
• Assist with pressure testing operations as assigned.
• Use specified agents and procedures for tasks such as removing protective coatings, applying corrosion inhibitors, and reactivating paint surfaces.
• Ensure proper grounding of the aircraft prior to cleaning operations and set up ventilation equipment to supply fresh air in work areas.
• Keep supervisors informed of progress and coordinate information with employees on other shifts.
• Mask areas as required to facilitate corrosion removal or painting operations.
• Prepare fuel vents for leak tests and restore them to normal after testing.
• Apply corrosion preventative seal as required and measure, layout, and apply aerodynamic seals to skin gaps on leading and trailing edge panels.
• Submit completed jobs or in-process checks to inspectors for acceptance or rejection.
• Apply decals, metalcals, placards, and charts to specific locations on parts and assemblies as required.

Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.
• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.
• Work in environments that may involve contact with metals, solvents, and coolants.
• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.
• Adapt to varying noise levels and atmospheric conditions.
• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee

Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.

Basic Qualifications :

• 1+ years of experience with paints, coatings, finishes, and/or sealants.

• Experience in handling chemicals and/or hazardous materials.

• Experience in prepping, cleaning, and painting various surfaces in industrial, commercial, or academic settings.

• Experience working from heights & using fall protection equipment with weight limitations.

• Experience with safety process and/or procedures in a manufacturing or operations environment.

• Experience working with tools and following work instructions.

Preferred Qualifications:

• 1+ year of experience performing aerospace sealing.

• Enrolled in a Boeing partnered manufacturing related high school or community and technology college academic program.

• Completed 1+ year of aerospace sealing in high school or community and technology college academic program.

Typical Education & Experience:

High school graduate or GED preferred.

Relocation:

• Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement :

• This position is for a variety of shifts

Total Rewards & Pay Transparency:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay: $25.00/hour, with potential to earn up to $51.82/hour in accordance with the terms of the relevant collective bargaining agreement.

Applications for this position will be accepted until Aug. 28, 2026

Language Requirements

English Preferred

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

• Partner with design and production from the beginning of a season to understand seasonal concepts and aesthetic fabric qualities needed to evolve each category, offering fabrics that meet the objective at a cost effective price
• Attend domestic and international tradeshows with the goal of identifying relevant trends and establishing new resources to help us evolve our quality and stay ahead of the trend curve while ensuring our price value proposition is maintained
• Maintain alignment with all cross functional teams to ensure seasonal calendar deadlines are meet/maintained
• Attend weekly cross functional meetings with production and design partners to discuss open issues so we can ensure product integrity and delivery are not compromised
• Spearhead Fabric summits to show case latest trends and new developments
• Procure fabrics for bulk that are within price range and meet design aesthetic
• Manage Fabric buys and best deliveries that will meet production needs
• Strengthen and strategize on developing sourcing base by building rapport with current mill partners
• Source new mills
• Provide technical analysis and strategic support to production for development and bulk
• Supervise both Research and Development and bulk fabric teams in NY and overseas
• Execute timely sample yardage development across all brand categories
• Source and develop textiles according to design direction and aesthetic, within divisional price parameters to meet required mark-ups
• Hands on knowledge of fabric construction, finishing and dyeing processes
• Counter source fabrics as needed for better costing and or deliveries
• Stay on top of industry and market trends and new innovations in fabrics and textiles
• Build and maintain strong relationships with design and production teams to monitor costs in advance of placements
• Partner with production and quality on fabric quality issues.
• Work with mills, laundries and factories to resolve issues in a timely manner that puts the company’s interest first.

To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

• Minimum of 10 years of progressive professional leadership in Fabric Research and Development and procurement
• Extensive experience in denim
• Established relationships with mills in worldwide fabric supply chain
• Previous experience in managing an overseas team
• Technical knowledge of fabric and garment construction, chemical and wash formulation
• Strong cost negotiation skills
• Textile degree preferred
• Must be knowledgeable regarding garment construction, machinery used in factories and laundries
• Textile development and Fabric Buying experience as well as knowledge of testing requirements for fabric and garments
• Proficient in Microsoft applications, excellent command of PLM
• Highly organized and detail oriented
• Ability to work in a fast paced environment and adapt to changing demands of the business

We are an EEO/Affirmative Action Employer. All qualified applicant swill receive consideration for employment without regard to race, color, religion, sex, national origin, disability or protected veteran status.

Sheet Metal Fabrication Workflow Specialist

Starting Hourly: $25/hr (based on experience)

The CAMduct Processor is responsible for converting ductwork designs and online duct orders into accurate, fabrication-ready jobs using Autodesk Fabrication CAMduct. This role processes work from Revit fabrication models and WebDuct/ecommerce systems, applies Comfort Systems USA Southeast fabrication standards, and prepares jobs for production equipment including plasma, coil line, and forming. It also includes reviewing shop drawings to ensure accuracy prior to fabrication.

This is an advanced-level role requiring independent processing, sound decision-making, and proactive problem resolution. The ideal candidate must be very thorough when working on the shop floor and must know how to accurately draw fittings.

Role Focus

Advanced role responsible for independent processing, workflow coordination, decision-making, and fabrication problem resolution

Key Responsibilities

• Process ductwork from Revit models into CAMduct
• Process WebDuct / online orders into CAMduct jobs
• Accurately draw fittings for fabrication
• Apply predefined fabrication standards (connectors, seams, gauges, oversize rules)
• Prepare developed patterns for shop use
• Verify quantities, dimensions, and constructability
• Communicate errors, discrepancies, or missing information
• Maintain clean job organization and labeling
• Apply and modify seams, oversize rules, and reinforcement strategies
• Resolve conflicts prior to shop release
• Coordinate with detailing, engineering, and fabrication teams
• Maintain CAMduct standards and assist in mentoring junior staff

Requirements

• 4+ years of related experience
• Strong sheet metal fabrication background
• Proven production CAMduct experience
• Experience drawing fittings accurately and efficiently
• Field installation experience (a plus)

Required Knowledge

• Basic and advanced CAMduct operation
• Rectangular duct fabrication methods
• Common connectors, seams, and reinforcement methods
• Oversize duct strategies and production impacts
• Strong understanding of plasma, coil line, and forming equipment limitations
• Deep knowledge off fabrication standards and workflow coordination

Comprehensive Benefits

• Medical, Vision, Dental
• Paid holiday and vacation
• 401(k) Plan with multiple investment options
• Training and Development Programs
• Company paid Employee Assistance Program
• Employee discount programs
• Company-paid and voluntary life insurance
• Company-paid and voluntary accidental death & dismemberment (AD&D)
• Company paid short-term disability and voluntary long-term disability
• Healthcare reimbursement account and dependent care reimbursement account
• Vehicle discount purchase programs

Disclaimer

The above statements are intended to describe the general nature and level of work being performed by employees assigned to this job. It is not designed to contain or be interpreted as a comprehensive inventory of all duties, responsibilities, and qualifications required of employees assigned to this job. All personnel may be required to perform duties outside of their normal responsibilities from time to time, as needed.

Comfort Systems USA (Southeast), Inc. is an equal opportunity employer in all aspects of employment and prohibits discrimination and harassment of any type to all individuals regardless of race, color, religion, sex, sexual orientation, national origin, age, disability, veteran status, genetic information, or any other characteristic protected by federal, state, or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training.

We strive to foster a work environment that includes and embraces racial, ethnic and gender diversity and other individual differences. Our commitment to diversity and inclusion helps us attract and retain the best talent, enables employees to realize their full potential, and drives high performance through innovation and collaboration.

Automation Fabrication Technician

Second Shift: Monday - Thursday 4:00 pm - 2:30 am

The Automation Fabrication Technician plays a primary role in the day-to-day operation of Trew’s advanced sheet metal fabrication system. This state-of-the-art system is comprised of many elements including Laser cutters, press brakes, folder, part sorting robots, part forming robots, and automated sheet metal storage and retrieval.

The Automation Fabrication Technician is a key member of Trew’s fabrication team and has a wide range of responsibilities across all elements of the system. They possess a diverse skillset and contribute to the entire value stream including capacity planning, machine programing, machine operation, final quality, and continuous improvement.

Key Responsibilities

• Machine Operation:
• Operate all key elements of the sheet metal fabrication system.
• Identify, resolve, and prevent issues within the system.
• Software:
• Utilize specialized software packages to program and operate all major elements of the sheet metal fabrication system.
• Business Process:
• Work with Automated Fabrication Supervisor to estimate fabrication times, balance workload, and manage work in progress to meet production schedules.
• Regularly assess system performance against established benchmarks.
• Maintenance:
• Perform routine checks, replace consumables, and perform preventative maintenance to ensure uptime of the system.
• Training:
• Willingness to learn new skills and software tools via formal training programs and informal on-the-job training.

Requirements

• Must possess excellent problem solving and communication skills, strong attention to detail, and willingness to learn.
• Must be able to work independently and as part of a team.
• Must have a good understanding of electrical and mechanical systems.
• The work environment is a warehouse assembly and fabrication facility. It will involve exposure to materials-handling equipment, the need to stand for extended periods, the need to follow safety protocols, and the requirement to lift and move heavy objects.
• Must be able to travel intermittently (less than 10%) for training.

Education / Experience

• Associate's degree in an engineering or manufacturing discipline (MET, EET, Electro-Mechanical, Mechatronics, Advanced Manufacturing, or similar).
• -OR-
• Experience programming and operating metal forming machines (Laser, Punch, Press Brake, Mill, Lathe).
• Computer competence and deep knowledge of sheet metal fabrication is strongly preferred (Laser Technology Tables, Bend parameters, Automatic material loading/unloading, Lights out operation).

TREW’s story:

Business gets done working together. Successful business happens when trusted partners work together, to win together. At TREW we know that our customers buy solutions and technology built by people. With over 500 team members, we work fearlessly every day to do the right thing, even when no one is watching. From seasoned professionals to undergraduate co-ops, our team members enjoy seeing the impact of their contributions every day.

Trew is an equal opportunity employer. Applicants will be considered for employment without regard to age, race, creed, color, national origin, ancestry, marital status, affectional or sexual orientation, ge

• 
  
• Assembling and wiring completely aircraft electrical, radio, and radar units such as main junction and terminal boxes, main engine disconnect plug, main control, switch panels, radio panels, and instrument panels
  
• Completing hookup of wiring, flexes, and cables, and troubleshooting electrical and radio assemblies having multiple interconnected units and accessories
  
• Forming and running harnesses, breaking out and terminating wiring to terminal points where wire routing and location of electrical units and accessories are established by jig board layouts
  
• Making continuity checks (including necessary operation) of above assemblies and harnesses as required, and selling same to inspection
  
• Fabricating completely hi-voltage radio and radar cables that require the soldering of multiple wires, shields, tubes, connectors, pins, washers, spacers, and cores
  

Fabrication Production Supervisor

The Fabrication Supervisor oversees daily shop‑floor operations, ensuring high‑quality fabrication work, safe practices, and efficient workflow. This role provides hands‑on technical support, leads and trains fabrication employees, and ensures all work meets blueprint specifications, tolerances, and quality standards. The supervisor is responsible for coordinating work assignments, monitoring production output, and maintaining a clean, organized, and safety‑focused environment.

Are you looking to make a career change to a stable company? This exciting opportunity offers a competitive salary plus an excellent benefits package including medical insurance, dental insurance, vision insurance and paid PTO.Does this position match your future career goals? Then this opportunity could be the right fit for you.

Employment Type:

Permanent Full-time

• Great Pay
• Very Competitive Benefits Package
• Excellent work environment with growth opportunities
• Immediate Hire

RESPONSIBILITIES:

• Supervise daily fabrication activities, ensuring work is completed accurately, safely, and on schedule.
• Provide hands‑on support in fabrication tasks, including cutting, forming, fitting, and assembly.
• Use measuring and inspection tools—tape measures, calipers, and basic gauges—to verify part accuracy and compliance with specifications.
• Interpret blueprints, drawings, tolerances, and technical specifications to guide fabrication processes.
• Assist with TIG welding tasks when needed; support welders with setup, inspection, and troubleshooting.
• Monitor workflow, assign tasks, and adjust priorities to meet production deadlines.
• Ensure adherence to safety policies, shop procedures, and quality standards, including ISO 9001 where applicable.
• Collaborate with engineering, quality, and production teams to resolve fabrication issues and improve processes.

QUALIFICATIONS:

• 3–5 years of fabrication experience.
• Prior lead or working‑supervisor experience in a fabrication or manufacturing environment.
• AWS welding certification (a plus).
• Familiarity with ISO 9001 quality management systems.
• Proven experience in reducing plant production costs, and in increasing safety standards.

BENEFITS:

• Great Pay
• Very Competitive Benefits Package
• Excellent work environment with growth opportunities
• Immediate Hire

Ask for Jasleen

Ajulia Executive Search is a search firm specializing in Manufacturing, Finance, IT, Legal and Pharmaceutical positions. This is a confidential search for one of our preferred clients. It is a direct hire position that includes competitive compensation and full comprehensive benefit package.

#ZR

Georgia Tech prides itself on its technological resources, collaborations, high-quality student body, and its commitment to building an outstanding and diverse community of learning, discovery, and creation. We strongly encourage applicants whose values align with our institutional values, as outlined in our Strategic Plan. These values include academic excellence, diversity of thought and experience, inquiry and innovation, collaboration and community, and ethical behavior and stewardship. Georgia Tech has policies to promote a healthy work-life balance and is aware that attracting faculty may require meeting the needs of two careers.

About Georgia Tech

Georgia Tech is a top-ranked public research university situated in the heart of Atlanta, a diverse and vibrant city with numerous economic and cultural strengths. The Institute serves more than 45,000 students through top-ranked undergraduate, graduate, and executive programs in engineering, computing, science, business, design, and liberal arts. Georgia Tech's faculty attracted more than $1.4 billion in research awards this past year in fields ranging from biomedical technology to artificial intelligence, energy, sustainability, semiconductors, neuroscience, and national security. Georgia Tech ranks among the nation's top 20 universities for research and development spending and No. 1 among institutions without a medical school.

Georgia Tech's Mission and Values

Georgia Tech's mission is to develop leaders who advance technology and improve the human condition. The Institute has nine key values that are foundational to everything we do:

1. Students are our top priority.
2. We strive for excellence.
3. We thrive on diversity.
4. We celebrate collaboration.
5. We champion innovation.
6. We safeguard freedom of inquiry and expression.
7. We nurture the wellbeing of our community.
8. We act ethically.
9. We are responsible stewards.

Over the next decade, Georgia Tech will become an example of inclusive innovation, a leading technological research university of unmatched scale, relentlessly committed to serving the public good; breaking new ground in addressing the biggest local, national, and global challenges and opportunities of our time; making technology broadly accessible; and developing exceptional, principled leaders from all backgrounds ready to produce novel ideas and create solutions with real human impact.

Atlanta, GA

The Institute for Matter and Systems (IMS), an Interdisciplinary Research Institute at Georgia Tech, solves societal, technological, and scientific challenges by integrating knowledge, methods, and expertise across disciplines:

• Fundamental science to comprehend and control matter from the nanoscale to the mesoscale.

• The synthesis, processing, and characterization of materials to achieve desired properties.

• The design and fabrication of novel devices and components with enhanced capabilities.

• The integration of materials, devices, and components into larger systems.

• Computing, modeling, simulation, and big data to advance progress at all length scales.

• Integration of economic, business, and social factors to ensure sustainable and equitable benefits in all stages of research, from conceptualization to impact.

IMS enables interdisciplinary research in areas including:

• Microelectronic technologies that efficiently sense, process, store, and communicate information while addressing issues related to security, privacy, and inequality.

• Built environment technologiesfor sectors such as automotive, infrastructure and energy that enhance strength, sustainability, reliability, resiliency, and efficiency.

• Human-centric technologiesthat improve human health, wellness, and performance.

• Frontiers in research infrastructure such as characterization, modeling, simulation, and artificial intelligence that impact numerous technologies.

The Research Engineer II will support and lead semiconductor fabrication, advanced packaging, and heterogeneous integration activities within the IMS Cleanroom Facilities. This role involves hands-on process development, tool ownership, and research execution across TSV/TGV processing, electroplating, wafer thinning, planarization, CMP, and MEMS/sensor fabrication in a multi-user research environment.

The position supports collaborative research initiatives involving materials development, interconnect technologies, high-density integration, and system-level packaging solutions for next-generation electronic and sensor platforms.

Support heterogeneous integration research through materials selection, interconnect process development, and multi-layer device integration.

Develop and optimize process flows for TSV/TGV fabrication, copper electroplating and RDL formation, wafer thinning (grinding), planarization and CMP, advanced packaging integration, and MEMS/sensor fabrication.

Design and execute experimental studies, analyze process data, and establish stable, documented baselines to ensure reproducibility and reliability.

Serve as technical owner for fabrication and packaging tools (e.g., DRIE/ICP systems, electroplating systems, grinding and CMP tools, and thin-film deposition systems)

Train and support academic and industry users on cleanroom processes and equipment.

Troubleshoot process and equipment issues and coordinate maintenance and continuous improvement efforts.

Collaborate with faculty, students, and industry partners on prototype development, sponsored research activities, and technical deliverables.

For Rank of Research Engineer II

• A master's degree in science, engineering or related area, and three (3) years of relevant full-time experience after completion of that degree, or
• A master's degree in science, engineering or related area, and five (5) years of relevant full-time experience after completion of a bachelor's degree, or
• Doctoral degree

Master's degree or Ph.D. in Electrical Engineering, Materials Science, Mechanical Engineering, Chemical Engineering, or a related field.
Experience in semiconductor fabrication and advanced packaging process development.
Hands-on expertise in several of the following areas: DRIE/ICP etching, thin-film deposition (ALD/PVD/CVD), electroplating, TSV/TGV processing, wafer thinning, planarization, CMP, or packaging assembly.
Experience with high-aspect-ratio via processing and copper fill optimization.
Background in heterogeneous integration or wafer-level packaging.
Experience in MEMS or sensor fabrication.
Prior experience in an academic cleanroom or semiconductor R&D environment.
Demonstrated ability to support research projects and contribute to technical documentation, reports, or publications.

Please list 3 professional references.

For additional information about this job opening, please contact Cecelia Jones,

The University System of Georgia is comprised of our 25 institutions of higher education and learning as well as the System Office. Our USG Statement of Core Values are Integrity, Excellence, Accountability, and Respect. These values serve as the foundation for all that we do as an organization, and each USG community member is responsible for demonstrating and upholding these standards. More details on the USG Statement of Core Values and Code of Conduct are available in USG Board Policy 8.2.18.1.2 and can be found on-line at policymanual/section8/C224/#p8.2.18_personnel_conduct.

Additionally, USG supports Freedom of Expression as stated in Board Policy 6.5 Freedom of Expression and Academic Freedom found on-line at policymanual/section6/C2653.

The Georgia Institute of Technology (Georgia Tech) is an Equal Employment Opportunity Employer. The Institute is committed to maintaining a fair and respectful environment for all. To that end, and in accordance with federal and state law, Board of Regents policy, and Institute policy, Georgia Tech provides equal opportunity to all faculty, staff, students, and all other members of the Georgia Tech community, including applicants for admission and/or employment, contractors, volunteers, and participants in institutional programs, activities, or services. Georgia Tech complies with all applicable laws and regulations governing equal opportunity in the workplace and in educational activities.

Equal opportunity and decisions based on merit are fundamental values of the University System of Georgia ("USG") and Georgia Tech. Georgia Tech prohibits discrimination, including discriminatory harassment, on the basis of an individual's race, ethnicity, ancestry, color, religion, sex (including pregnancy), national origin, age, disability, genetics, or veteran status in its programs, activities, employment, and admissions. Further, Georgia Tech prohibits citizenship status, immigration status, and national origin discrimination in hiring, firing, and recruitment, except where such restrictions are required in order to comply with law, regulation, executive order, or Attorney General directive, or where they are required by Federal, State, or local government contract.

This is not a supervisory position.
This position does not have any financial responsibilities.
This position will not be required to drive.
This role is not considered a position of trust.
This position does not require a purchasing card (P-Card).
This position will not travel
This position does not require security clearance.

Successful candidate must be able to pass a background check. Please visit employment/pre-employment-screening

Boccard Life Sciences, industrial integrator, located in 35 countries, designs, manufactures, assembles, and installs process solutions for its customers worldwide in the Food & Ingredients, Pharmaceutical, Cosmetics, and Brewing Industries.

Fabricator

The Fabricator is responsible for the precision assembly, preparation, and layout of hygienic process piping, D1.1 Structural steel and equipment used in regulated environments such as food, pharmaceutical, and other life sciences sectors. Working from technical drawings, isometric diagrams, and project specifications, the Fabricator ensures that all components meet stringent quality, safety, and cleanliness standards, including compliance with GMP (Good Manufacturing Practices), ASME BPE guidelines, and internal quality systems. This role plays a critical part in the successful execution of projects by producing high-purity assemblies that meet client expectations and regulatory requirements. The Fabricator contributes to the integrity and reliability of process systems that are essential for the manufacturing of safe, sterile, and high-quality products.

Position Functions:

• Read and interpret blueprints, specifications, and schematics to measure, cut, thread, groove, and weld pipes to exact specifications
• Responsible for tools, components, and work area cleanliness
• Document work progress and complete required paperwork, including material usage and inspection reports
• Identify and report any equipment malfunctions or safety concerns to supervisor
• Operate power tools, pipe cutters, threading machines and other material handling equipment safely and efficiently
• Assist in the packaging of raw materials for fabrication work packages of sanitary piping and stainless steel structural shapes utilizing SOP and client specifications
• Assemble stainless steel piping systems and sanitary fittings using isometric drawings
• Prioritize fabrication tasks based on the production schedule and supervisor guidance
• Comply with safety, environmental, and contamination control procedures
• Use PPE appropriate to cleanroom or controlled environments
• Properly segregate and dispose of waste according to life sciences protocols
• Inform supervisor of deviations, incidents, or equipment malfunctions
• Follow Boccard Management System (BMS) guidelines, health and safety procedures, and quality system policies

Requirements:

High School Diploma required. Technical or vocational training in welding or mechanical assembly preferred.

Experience:

Minimum 1 year experience in fabrication in a regulated field such as food, hygienic or pharmaceutical-grade piping systems, biotech, or in other sectors as a structural/pipe fitter with stainless steel.

Skills and Abilities:

• Versatility and strong willingness to learn and perform more than assigned tasks
• Ability to work autonomously and complete tasks without constant supervision
• Attention to detail and cleanliness
• Ability to work with stainless steel and sanitary fittings
• Basic understanding of P&IDs, ASME BPE and GMP guidelines
• Excellent organizational skills and manual dexterity
• Strong team spirit and punctuality

This job requires standing, lifting, repetitive motions, and long static postures for prolonged periods. Precision-focused work with adherence to quality and GMP procedures.

• 
  
• Program, set up, and operate CNC press brake and laser equipment
  
• Proficiently interpret drawings and work packages while maintaining attention to detail and understanding precision tolerances.
  
• Operate manual machines such as lathes, mills, drills and machinist hand tools.
  
• Measure precision parts using calibrated instruments.
  
• Fabricate new parts or repair existing ones as needed in manufacturing processes
  
• Troubleshoot minor programming and mechanical issues as needed
  
• Understand and operate conversational milling machines and Acu-Rite digital readouts.
  
• Work with various materials to produce high-quality products that meet drawing specifications.
  
• Review samples, drawings, or instructions to understand output specifications.
  
• Plan the sequence of necessary actions to complete a job.
  

• 
  
• High School Diploma or equivalent
  
• Minimum 6 years of experience in CNC Press brake/laser operation in a manufacturing setting
  
• Basic understanding of precision sheet metal, encompassing flat layouts, bend deductions, and related machine tooling
  
• Skilled in fabricating, fitting, and assembling precision parts per drawings
  

• 
  
• Proficient in installing threaded inserts and various hardware components into parts
  
• Excellent attention to detail.