Si Engineering P C Jobs in Usa

Open date: August 20, 2025

Most recent review date: Thursday, Sep 4, 2025 at 11:59pm (Pacific Time)

Applications received after this date will be reviewed by the search committee if the position has not yet been filled.

Final date: Thursday, Aug 20, 2026 at 11:59pm (Pacific Time)

Applications will continue to be accepted until this date, but those received after the review date will only be considered if the position has not yet been filled.

The Department of Nuclear Engineering at the University of California, Berkeley is generating an applicant pool of qualified temporary instructors to teach regular and Summer Session courses, should an opening arise. In addition to classroom/laboratory teaching and preparation, general duties may include (but are not limited to) managing and mentoring graders and/or graduate student instructors (teaching assistants), holding office hours, assigning grades, advising students, preparing course materials (e.g., syllabus), and maintaining a course website.

We are also seeking applicants for hourly Teacher Special Programs (TSP), should an opening arise. The TSP instructor's principal responsibility will be overseeing capstone projects in the Master of Engineering (MEng) program of the Nuclear Engineering Department. This will include the following tasks: Designing and proposing capstone projects. Helping match students into suitable projects. Meeting with each capstone project team on a regular basis to review results, manage interpersonal aspects, and maintain efficient progress. Provide critical, constructive feedback on students' written reports and oral presentations. Coordinating and participating in the MS Plan II exam of each student at the end of the capstone project period.

Department:

Master's degree or equivalent international degree at the time of application.

For Lecturers: Five years of experience in industry or a

research institute, or a Ph.D. or equivalent international degree by the start of the appointment.

For TSPs: Two years of experience in industry or a research

institute, or a Ph.D. or equivalent international degree by the start of the appointment.

Lecturer Positions:

Demonstrated excellence in teaching

Experience teaching college-level courses

A higher-level degree and/or prior teaching experience is preferred in one of the following specializations.

Specializations include, but are not limited to:

Nuclear Engineering

Nuclear Physics, Nuclear Reactions, Nuclear Detection

Radioactive Waste Management

Nuclear Fuel Cycle

Radiation Biological Effects, Dosimetry, Radiation Protection

Radiation Transport, Reactor Physics

Engineering Thermodynamics

TSP Positions: Mentoring experience in one or more of the related engineering fields/specializations or comparable experience/training.

Nuclear

Mechanical

Chemistry

Physics, etc.

Experience in supervising teams of researchers at the graduate level and experience working in industry and/or a research institute.

• Curriculum Vitae - Your most recently updated C.V.

  
  

• Cover Letter - Please discuss prior teaching experience, teaching approach, and future teaching interests. This can include, for example, specific efforts, accomplishments, and future plans to support the success of all students through inclusive curriculum, classroom environment, and pedagogy.

  
  

• Statement of Teaching - Summary of Teaching experience/philosophy for lecturer positions or Mentoring/teaching statement for TSP positions.

  
  

• 2 required (contact information only)

Help contact:

UC Berkeley is committed to diversity, equity, inclusion, and belonging in our public mission of research, teaching, and service, consistent with UC Regents Policy 4400 and University of California Academic Personnel policy (APM 210 1-d). These values are embedded in our Principles of Community, which reflect our passion for critical inquiry, debate, discovery and innovation, and our deep commitment to contributing to a better world. Every member of the UC Berkeley community has a role in sustaining a safe, caring and humane environment in which these values can thrive.

The University of California, Berkeley is an Equal Opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or protected veteran status.

For more information, please refer to the University of California's Affirmative Action and Nondiscrimination in Employment Policy and the University of California's Anti-Discrimination Policy.

In searches when letters of reference are required all letters will be treated as confidential per University of California policy and California state law. Please refer potential referees, including when letters are provided via a third party (i.e., dossier service or career center), to the UC Berkeley statement of confidentiality prior to submitting their letter.

As a University employee, you will be required to comply with all applicable University policies and/or collective bargaining agreements, as may be amended from time to time. Federal, state, or local government directives may impose additional requirements.

Unless stated otherwise, unambiguously, in the position description, this position does not include sponsorship of a new consular H-1B visa petition that would require payment of the $100,000 supplemental fee.

As a condition of employment, the finalist will be required to disclose if they are subject to any final administrative or judicial decisions within the last seven years determining that they committed any misconduct.

• 
  
• "Misconduct" means any violation of the policies or laws governing conduct at the applicant's previous place of employment, including, but not limited to, violations of policies or laws prohibiting sexual harassment, sexual assault, or other forms of harassment or discrimination, as defined by the employer.
  
• UC Sexual Violence and Sexual Harassment Policy
  
• UC Anti-Discrimination Policy
  
• APM - 035: Affirmative Action and Nondiscrimination in Employment
  

Under general and/or immediate supervision from higher level engineering staff, performs a variety of journey level technical drafting, office and field engineering work; and provides assistance and information to the public. May exercise functional and technical supervision over less experienced technical staff.
Position Snapshot/A Day in the Life: The Engineering Technician II performs routine drafting and technical engineering work in support of municipal infrastructure projects. Responsibilities include assisting with engineering design and planning, providing customer service, and performing technical office and field duties related to updating, maintaining, and analyzing the Public Works and Engineering Department's Geographic Information System (GIS) and utility infrastructure data. This position coordinates and conducts research, field data collection, and condition assessments of infrastructure assets, using GIS, database, and information management tools to support capital planning and ensure compliance with regulatory requirements.

Essential Functions

Engineering Technician II -This is the full journey level in the Engineering Technician series. Employees within this class are distinguished from the Engineering Technician I By the performance of the full range of duties as assigned including the moderately complex duties of drafting, office and field engineering work. Employees at this level receive only occasional instruction or assistance as new or unusual situations arise, and are fully aware of the operating procedures and policies of the work unit. This class is flexibly staffed and is normally filled by advancement from the I level, or when filled from the outside, requires previous work experience.

ESSENTIAL FUNCTIONS:Incumbent must have the ability to:

• Review and process tract maps, parcel maps, of line adjustments, grants of easement, and street right-of-ways for recordation.
• Verify fulfillment of conditions of approval for new subdivisions; perform on-site inspections to verify survey monuments related to parcel maps and lot line adjustments.
• Prepare and draft technical engineering plans for construction of streets, alleys, storm drains, water lines, and other public improvements.
• Provide public assistance at counter and over the telephone.
• Prepare quantity and cost estimates for engineering projects.
• Maintain a variety of maps and records including tract maps, parcel maps, lot line adjustments, easements, street and address changes.
• Review engineering plans to determine appropriate layout of construction projects.
• Perform on-site inspections to obtain information; determine angles and set grade stakes, hubs, turning points and benchmarks using appropriate surveying techniques; locate and measure boundary lines, right-of-ways, and land grades.
• Make and check mathematical calculations related to surveying, drafting and basic engineering.
• Maintain accurate survey records in the form of field notes and sketches.
• Participate in a variety of engineering design and planning work related to municipal engineering projects.
• Answer questions and provide information to the public concerning engineering activities.
• Assist in development and maintenance of the record keeping and filing systems.
• Prepare, assemble and distribute copies of maps, charts and blueprints.
• Answer questions and provide information to the public concerning engineering activities.
• Perform any other tasks or functions deemed necessary to the daily operations of the employer.

EXPERIENCE AND TRAINING GUIDELINES: A combination of experience and training that would likely provide the required knowledge and abilities is qualifying. The employee must have knowledge of:

Engineering Technician II: In addition the qualifications of Engineering Technician I, knowledge of:

• Terminology, methods, practices and techniques of drafting.
• Trigonometry as applied to the computation of angles, areas, distances and traverses.
• Elementary surveying techniques and practices.
• Engineering maps and records.

• Perform moderately complex engineering and mathematic calculations with speed and accuracy.
• Understand and follow written instructions and sketches.
• Use and care for drafting, surveying, and mechanical instruments and tools.
• Work independently in the absence of supervision.

The City of Fontana has a flexible benefits plan. This plan allows for employees to select benefits based upon their individual needs. Full-time and Classified Part-time employees are eligible for benefits.

Please to view our excellent employee benefit options.

• 
  
  
• High School graduate or equivalent
  
  
• Some college
  
  
• Trade school graduate or Apprenticeship
  
  
• Associate's degree in related field
  
  
• Bachelor's degree in related field
  
  
• Bachelor's degree or higher in non-related field
  
  
• Equivalent to Bachelor's degree in related field
  
  
• Master's degree or higher in related field
  
  
• None of the above
  
  

• 
  
  
• No experience
  
  
• Less than one (1) year.
  
  
• One (1) year or more year(s) but less than two (2) years.
  
  
• Two (2) or more years but less than four (4) years.
  
  
• Four (4) or more years but less than six (6) years.
  
  
• Six (6) years or more but, less than eight (8) years.
  
  

Required Question

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Defense, Space & Security (BDS) is looking for an Air Dominance Loads & Dynamics Manager to join our team in Hazelwood, MO. This manager leads a team of Loads and Dynamics Engineers who conduct Flight Loads, Ground Loads, as well as dynamics/flutter work for a major program integrated product team.

The successful candidate will have experience with all aspects of aircraft loads and dynamics with deep experience expected in at least one specialty loads area like Flight loads, ground loads, or flutter. In addition to technical qualifications to cover the product lifecycle, experience with program and customer interactions as well as cost control account and personnel development collaborations are expected.

Position Responsibilities:

• Responsible for the overall success of a diverse loads and dynamics team within an integrated product team structure.
• Manage a team of 8-16 employees' engineering and technical activities in the areas of Flight Engineering.
• Develop project plans aligned with program objectives.
• Implement plans to ensure business, technical and customer requirements are achieved. Assign authority and responsibilities to employees to execute product design and development.
• Review plan execution, makes appropriate adjustments and resolves issues.
• Monitor appropriate metrics to ensure performance to plan.
• Report cost, schedule, and technical performance to program leadership.
• Forecast resource needs and makes hiring decisions.
• Coach, counsel, and provide developmental opportunities and job assignments.
• Ensure employees are working effectively.
• Provide on-going developmental feedback.
• Enforce company rules and policies regarding ethical behavior, safety, security, use of company property, and time charging.

Basic Qualifications (Required Skills/Experience):

• Bachelor of Science degree in Engineering, Engineering Technology (including Manufacturing Technology), Computer Science, Data Science, Mathematics, Physics, Chemistry or non-US equivalent qualifications directly related to the work statement
• 5+ years of experience in Loads & Dynamics engineering
• 3+ years of experience leading teams
• Active Secret Clearance

Preferred Qualifications (Desired Skills/Experience):

• Prior management experience
• Excellent communication skills
• Experience with loads and dynamics system requirement verification/validation and military qualification/airworthiness activities
• Experience developing and administering budgets, schedules and performance standards
• Experience with lab, ground and flight testing
• Prior oversight of technical efforts of large or multi-skill teams
• Mentoring or technical lead engineer experience

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay is based upon candidate experience and qualifications, as well as market and business considerations.

The Boeing 401(k) helps you save for your future, with contributions from Boeing that can help you grow your retirement savings. Our best-in-class retirement benefit features:

• Best in class 401(k) plan: we'll match your contributions dollar for dollar, up to 10% of eligible pay with Immediate 100% vesting
• Student Loan Match: The Boeing 401(k) Student Loan Match allows eligible enrolled U.S. employees to have their qualified student loan debt payments counted, along with any match-eligible contributions they make, for purposes of determining the Company Match to employees' Boeing 401(k) accounts.

Summary pay range: $142,800 - $193,200

Applications for this position will be accepted until Apr. 06, 2026

Export Control Requirements:

This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a "U.S. Person" as defined by 22 C.F.R. §120.62 is required. "U.S. Person" includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee.

Export Control Details:

US based job, US Person required

Relocation

This position offers relocation based on candidate eligibility.

Security Clearance

This position requires the ability to obtain a U.S. Security Clearance for which the U.S. Government requires U.S. Citizenship. An interim and/or final U.S. Secret Clearance Post-Start is required.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for 1st shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

At KPFF Consulting Engineers, we are more than just an engineering design firm. For over 60 years, we have dedicated ourselves to innovative, sustainable engineering that shapes the built environment and tackles complex infrastructure challenges. Our team culture emphasizes balance, growth, and well-being, supporting each member's professional journey with flexibility, generous benefits, and a collaborative approach to work-life integration.

With over 1,400 professionals across 27 offices nationwide, KPFF's decentralized structure allows each office the flexibility to pursue projects aligned with their regional strengths.

We are seeking an accomplished Structural Engineering Project Manager to join our team in Boise, Idaho. This role is ideal for an experienced professional with a strong background in managing complex structural engineering projects.

As a Structural Engineering Project Manager, you will oversee the planning, design, and execution of large-scale structural projects, ensuring they are delivered on time, within budget, and to the highest quality standards. You will be responsible for client management, project team leadership, and strategic decision-making throughout the project lifecycle.

• Lead Structural Project Management and Execution: Oversee all phases of structural engineering projects, including project initiation, design, budgeting, scheduling, and closeout. Ensure project goals are achieved on time and within scope.
• Provide Technical Expertise and Quality Control: Supervise the preparation and review of detailed structural calculations, drawings, and specifications. Ensure designs adhere to company standards, regulatory requirements, and industry best practices.
• Develop and Manage Client Relationships: Serve as the primary contact for clients, fostering strong relationships, managing expectations, and ensuring client satisfaction. Contribute to proposal development and support business growth through networking and client engagement.
• Coordinate Multi-Disciplinary Teams: Collaborate with architects, contractors, and other engineering disciplines to ensure cohesive project delivery and seamless integration of structural systems with other design elements.
• Mentor and Develop Team Members: Lead project teams, providing mentorship to junior and mid-level engineers. Foster a collaborative and supportive work environment that encourages professional growth.
• Oversee Regulatory Compliance and Risk Management: Ensure projects comply with all relevant building codes, safety standards, and environmental regulations. Identify potential risks and develop mitigation strategies.
• Drive Innovation and Continuous Improvement: Stay informed of industry advancements and integrate new technologies and methods to improve project outcomes and client satisfaction.

• Bachelor's degree in Civil Engineering or Structural Engineering; Master's degree preferred
• At least 7 years of experience in structural engineering, with a focus on project management and complex structures
• Professional Engineer (PE) license required, SE license preferred
• Strong proficiency in structural analysis and design software (e.g., RAM, ETABS, Revit)
• Proven experience in project management, including scheduling, budgeting, and resource allocation
• In-depth knowledge of structural engineering principles, materials, and mechanics
• Excellent understanding of building codes, standards, and construction practices
• Exceptional client management skills with a history of successful client relations and business development
• Strong leadership and mentoring abilities, with experience managing project teams and fostering professional development
• Superior written and verbal communication skills, with the ability to prepare and present technical reports
• Detail-oriented and highly organized, with strong problem-solving and decision-making skills

Physical Demands and Work Environment

• Ability to sit or stand for extended periods while working on a computer, reviewing plans, or conducting site visits.
• Capacity to move around project sites, climb ladders, and navigate uneven terrain.
• Occasionally lifting up to 15 pounds of equipment or materials.

Culture and Benefits At KPFF, we offer a rewarding career path that emphasizes autonomy, innovation, and professional development. Our culture prioritizes employee ownership, teamwork, and shared values, creating an environment where contributions are celebrated, and career growth is encouraged. We aren't just colleagues; we're a community dedicated to collaborative innovation, providing you the platform to make a lasting impact on meaningful projects.

KPFF Employee Benefits

• Medical Plan Options: Choice of Traditional PPO or HDHP with HSA, covering preventive care and prescriptions.
• Flexible Spending Accounts (FSA): Tax-advantaged accounts for healthcare and dependent care expenses.
• Dental & Vision: Full preventive care, plus coverage for major dental services and vision allowances.
• Employee Assistance Program (EAP): Free, confidential support for personal, family, and work challenges.
• Life & AD&D Insurance: Company-provided life insurance equal to one year's salary, plus AD&D.
• 401(k) Retirement Plan: KPFF contributes 3% of salary, with no match needed.
• Disability Insurance: Short-term and long-term coverage at 60% income, fully covered by KPFF.
• Paid Time Off: Generous PTO, two floating holidays, and paid company holidays.
• Paid Family Leave: Six weeks at 60% pay, with options to use PTO for full income.

KPFF Consulting Engineers participates in E-Verify and will provide the federal government with your Form I-9 information to confirm that you are authorized to work in the U.S.

KPFF Consulting Engineers is an equal opportunity employer and considers all qualified applicants for employment without regard to race, color, creed, ethnicity, national origin, religion, marital status, sex/gender (including sexual orientation or gender identity), pregnancy, veteran status, citizenship status, physical or mental disability, or any other protected basis.

The Broward County Board of County Commissioners is seeking qualified candidates for Engineering Unit Supervisor (Highway Construction and Engineering Division).

THIS JOB ANNOUNCEMENT WILL REMAIN OPEN UNTIL SUFFICIENT NUMBER OF APPLICATIONS ARE RECEIVED AND MAY CLOSE AT ANY TIME.



This position supports professionals responsible for managing capital and mobility advancement projects for Broward County's Highway Construction and Engineering Division. The ideal candidate will have experience coordinating with multiple entities, including municipalities, state agencies, and local authorities. Work involves the review, planning, and coordination of the design and construction of County capital and mobility advancement projects, including schedules, budgets, and staff assignments.

General Description
Performs advanced professional and supervisory engineering work in the design and review of a wide variety of engineering and environmental projects.
Works under administrative supervision, developing and implementing programs within organizational policies and reports major activities to executive level administrators through conferences and reports.
Minimum Education and Experience RequirementsRequires a Bachelor's degree from an accredited college or university with major coursework in civil engineering.

Requires six (6) years progressively responsible experience in professional engineering work related to roadway design and construction or closely related field, including two (2) years of supervisory experience.
Special Certifications and LicensesPossess and maintain Professional Engineer License in State of Florida for duration of assignment.

Preferences* Master's Degree in Civil Engineering, Public Administration or closely related field* Certified in the use of one (1) or more of the following engineering programs (i.e. ICPR, ASAD, HY-8, HEC-RAS, HEC-HMS, Synchro, HCS, IMSA), or similar
* Construction Training Qualification Program (CTQP) Certifications (Asphalt, Concrete, Earthwork, QC Manager, etc.)
* Professional Traffic Operations Engineer, Professional Surveyor & Mapper, General Contractor License, or similar
* Project Management Professional and/or Certified Public Manager
* Advanced Work Zone Traffic Control Training Certification
* At least ten (10) years of experience in design and construction of roadway/traffic projects
* At least five (5) years of experience in one (1) of the following specialized fields of engineering: Traffic Operations, Structures, Drainage, Geotechnical, Construction Management
* At least three (3) years of experience with MicroStation OpenRoads Designer (ORD)
* At least two (2) years of experience in governmental contract and procurement
* At least two (2) years of experience in the preparation of agenda items and/or resolutions

SCOPE OF WORK

The functions listed below are those that represent the majority of the time spent working in this class. Management may assign additional functions related to the type of work of the job as necessary.

Schedules, assigns, and supervises engineering design projects; directs and coordinates field surveys, plan design, preparation and review, cost estimate development, and specifications preparation; participates in the development and design and review of major and complex projects.

Supervises and participates in the analysis and review of engineering studies and designs prepared by professional consultants; prepares recommendations for the consideration of professional and administrative superiors and committees.

Supervises the preparation of right-of-way and construction plans for major thoroughfares; conducts studies and prepares reports on proposed locations for future major thoroughfares; maintains liaison with appropriate outside agencies concerning projects under consideration for construction.

Supervises and participates in the activities of construction engineers, inspectors, and materials technicians in the investigation and construction of water and sewer mains, roadways, structures, and related public work projects; prepares general and special specifications for contract construction; supervises the maintenance and analysis of payment estimates and records.

Oversees and performs the technical review of remedial action plans; oversees and administers environmental licensing programs.

Conducts special engineering studies and projects relating to technical and administrative aspects of the public works function; coordinates the utilization of computer technology as related to the engineering function.

Conducts long-range studies involving other departments, agencies, and organizations; prepares reports and recommendations; seals and signs engineering plans, drawings, and documents.

Performs related work as assigned.

Physical Demands

Physical demands refer to the requirements for physical exertion and coordination of limb and body movement.

Performs sedentary work that involves walking or standing some of the time and involves exerting up to 10 pounds of force on a regular and recurring basis or sustained keyboard operations.

Unavoidable hazards refer to the job conditions that may lead to injury or health hazards even though precautions have been taken.

Involves routine and frequent exposure to traffic; moving machinery.

Competencies

• Manages Complexity

• Decision Quality

• Balances Stakeholders

• Directs Work

• Plans and Aligns

• Optimizes Work Processes

• Ensures Accountability

• Builds Effective Teams

• Communicates Effectively

• Situational Adaptability

• Collaborates: Building partnerships and working collaboratively with others to meet shared objectives.
• Customer focus: Building strong customer relationships and delivering customer-centric solutions.
• Instills trust: Gaining the confidence and trust of others through honesty, integrity, and authenticity.
• Values differences: Recognizing the value that different perspectives and cultures bring to an organization.

*If the application for this position prompts you to respond to a question with number of years, e.g., your number of years of relevant work experience, please enter '30' if your answer is 30 years or more. Please be aware that we are acting as a recruitment partner for one of our clients in this search.*

Candidates must be willing to sit onsite and regularly work from or meet at the client's office. If a candidate is not located in the market, the client is open to providing relocation assistance.

Position Summary

An expanding telecommunications infrastructure organization is seeking a Director of OSP Engineering to oversee the planning, design, and permitting of fiber network infrastructure. This leader will guide a team responsible for developing scalable network designs that support continued broadband expansion across multiple markets.

The role requires a strategic leader who can build effective engineering processes, maintain strong relationships with municipalities and regulatory bodies, and ensure engineering activities support construction timelines and long-term network performance.

Responsibilities

• Lead all outside plant engineering functions including fiber network design, field engineering, drafting, and permitting coordination.
• Manage and develop an engineering organization consisting of internal staff and third-party design partners.
• Ensure engineering deliverables are accurate, complete, and aligned with construction schedules.
• Develop and maintain a pipeline of engineering work to support ongoing network build programs.
• Oversee planning and management of fiber capacity and network routing.
• Implement processes that maintain consistency, quality, and efficiency across engineering deliverables.
• Build relationships with municipalities, utilities, and other governing bodies to support permitting and right-of-way approvals.
• Coordinate closely with construction, operations, and vendor teams to ensure smooth project execution.
• Monitor key operational metrics related to engineering output, project readiness, and cost efficiency.
• Provide leadership, mentorship, and performance management for engineering staff.

Team Leadership

The Director will lead a growing engineering organization consisting of design engineers, permitting professionals, and administrative support personnel. The team includes both direct and indirect reports supporting the overall outside plant engineering function.

Qualifications

• 8+ years of experience in telecommunications, outside plant engineering, or fiber network construction
• Demonstrated experience managing engineering teams and supporting large-scale infrastructure deployments
• Strong understanding of fiber network architecture and outside plant design principles
• Experience working with permitting processes and municipal stakeholders
• Ability to lead multiple concurrent initiatives in a fast-paced environment
• Strong leadership, communication, and organizational skills

Preferred

• Bachelor's degree in Engineering, Business, or a related discipline
• Experience with engineering and network design platforms such as GIS, CAD, ESRI, Vetro, or similar tools

Opportunity

This position offers the opportunity to play a key leadership role in the development and expansion of next-generation fiber infrastructure while building and shaping a growing engineering organization.

Baer is looking for Head of Engineering & Platforms – Product Organization for a 6+ month Contract-to-Hire project located in Atlanta, GA

Title: Head of Engineering & Platforms – Product Organization

Location: Hybrid – Atlanta, GA

Duration: 6 months - Contract to Hire

Rate: All-inclusive

Alignment: W2 or C2C

Overview

We are seeking a Head of Engineering & Platforms to lead and scale the engineering organization that powers digital products and platforms across North America. This leadership role will define the engineering vision, build high-performing teams, and establish modern platform architecture to support scalable, secure, and high-performing digital experiences.

Description

• Define and execute the engineering vision, technical strategy, and platform roadmap.
• Build and scale a product-led engineering organization (100+ engineers).
• Lead engineering teams across platform, full-stack, mobile, and data development.
• Implement modern engineering practices including CI/CD, DevOps, automation, and observability.
• Partner with Product, Design, and Data leaders to deliver innovative digital solutions.
• Drive platform architecture, scalability, reliability, and security.
• Lead build vs. buy decisions, leveraging SaaS and custom solutions.
• Foster a culture of engineering excellence, innovation, and continuous improvement.

Requirements

• 15+ years of engineering experience, including leadership roles.
• 7+ years leading engineering teams or organizations.
• Experience building or scaling engineering organizations in product-driven environments.
• Strong knowledge of modern software engineering practices, cloud platforms, and platform architecture.
• Experience working with product operating models and cross-functional teams.
• Excellent leadership, communication, and stakeholder management skills.
• Must be based in or willing to relocate to Atlanta, GA and work in a hybrid schedule.
• Bachelor's Degree.

Company Overview:

Baer provides best-in-class engagement experiences for our consultants. Our job requirements are carefully vetted and are typically associated with pivotal programs offering tremendous opportunities to expand your skills leveraging the latest solutions.

Baer is an equal opportunity employer including disability/veteran.

ALL OPEN JOBS

Date Posted:

Country:

Location:

Position Role Type:

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Security Clearance:

At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world.

The Systems Engineering, Integrated Systems Department is seeking a Systems Engineering Technical Lead for the NASAMS product line. This role requires strong technical expertise and engineering leadership skills to drive the design and development of world-class air and missile defense systems.

The Integrated Systems Department supports Raytheon by providing world-class weapon systems engineering. Domain expertise includes radar systems, effector systems, battle management, command and control, network design, battlespace integration, and interoperability for both domestic and international customers.

You will work alongside motivated engineers who are responsible for conducting systems engineering studies and trades; supporting system requirements definition and analysis; and contributing to algorithm development, integration, test, and evaluation.

What You Will Do

• Provide technical oversight and management for a variety of Systems Engineering efforts

• Concept and requirements development (including decomposition and flowdown) within a mature product-line

• Concept of Operations (CONOPS) development and design

• Algorithm optimization and development

• Multi-disciplinary development efforts across the kill-chain for an Air and Missile Defense System

• Collaboration with customer to bring new capabilities to the warfighter

• Functional analysis of real world and test data; trade studies to bring advanced features to fielded system

• Support and lead Internal and External Program and Design Reviews

• Collaborate with other IPT/CPT leads from the various functions and products

• Support and lead Internal Research and Development for future capability upgrades

• System integration and test support, including live fire test events

• Periods of travel up to 25% of time both domestically and internationally

Qualifications You Must Have

• Typically requires a degree in Science, Technology, Engineering or Mathematics (STEM) and a minimum of 8 years of prior relevant experience

• Experience with Air Defense Systems in systems engineering roles supporting development or production

• Experience with managing budget, scope and/or earned value

Qualifications We Prefer

• Experience interfacing with external customers and industry partners

• Excellent communication skills, written and verbal, with a variety of audiences

• Self-motivated, passionate leader

• 5+ years of experience in Air Defense Systems, Systems Engineering production or development

• Existing DoD Security Clearance

• Knowledge of Air Defense systems (examples – Patriot and NASAMS Systems)

• Experience managing competing programmatic priorities

• Experience making challenging technical decisions

• Familiarity with the Raytheon Integrated Product Development System (IPDS) or equivalent

• Experience with Earned Value Management (EVM) (plus, experience with Raytheon execution of EVM)

• Advanced degree in EE, CE, Physics, Math, ME, Aerospace\

What We Offer

• Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation.

• Relocation assistance is available

Learn More & Apply Now!

Please consider the following role type definition as you apply for this role.

• Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products.

Clearance Information: This position requires a security clearance. DCSA Consolidated Adjudication Services (DCSA CAS), an agency of the Department of Defense, handles and adjudicates the security clearance process. More information about Security Clearances can be found on the US Department of State government website here: part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms

Date Posted:

Country:

Location:

Position Role Type:

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Security Clearance Type:

Security Clearance Status:

At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world. 

Are you passionate about turning innovative concepts into reality? Do you thrive in dynamic environments? Raytheon is seeking a talented and motivated Systems Engineer to join our team within the Systems Engineering and Test Capabilities (SETC) Discipline, supporting a range of programs. This role offers a unique opportunity to work across the full lifecycle of the product, from concept to deployment

Every day will bring new challenges, requiring you to collaborate across disciplines to troubleshoot issues, perform data analysis, and implement solutions. Your contributions will directly impact the success of mission-critical defense systems, and you'll have a hands-on role in ensuring the entire system functions seamlessly.

The Systems Engineering and Test Center (SETC) organization is currently hiring a Systems Engineer II to join our Tucson, AZ location. SETC is an exciting and challenging environment where you will have the opportunity to design, develop and test to shape innovative solutions for our customers. Join our organization and experience the Systems V engineering life cycle while interfacing with a variety of engineering disciplines, subject matter experts, chief engineers, chief technologists, the customer, and so many more to ensure we design, integrate, test and strengthen our systems to work the first time and every time for our warfighters!

In this role, you will have the opportunity to work on an effectors project pertinent to the systems lifecycle.  This role is 100% on-site at our Tucson, AZ campus.

What You Will Do

In this Systems Engineer role, you may support some of the following types of activities:

• Core Systems Engineering: Update, maintain, and improve requirements. Develop system architecture and model using Model Based Systems Engineering. Conduct trade studies based on Concept of Operations. Collaborate with engineers of all disciplines.

• Perform Test Planning: Develop and implement test plans, procedures, integration, and verification documentation in both simulated and real-world environments and perform/execute the testing

• Integrate Systems: Collaborate with multi-disciplinary team to integrate hardware and software into tactical systems, evaluating their functionality and impact. Evaluate test results for requirements compliance.

• Create/modify documentation in support of design reviews and in preparation for test events.

• Perform Platform Integration, Flight Test, Qualification, Design Verification Execution

• Troubleshoot and Analyze: Identify and resolve hardware, software, and system issues through detailed data analysis and debugging.

• Perform Data Analysis: Conduct statistical and numerical analysis test data to ensure optimal system performance and verify requirements.

• Support Missions: Travel as needed to support mission execution at various locations including local RTX facilities, test sites, vendor facilities, and customer locations.

Qualifications You Must Have

• Typically requires a Bachelor’s in Science, Technology, Engineering, or Mathematics (STEM preferred) and a minimum of 2 years of prior engineering experience.

• Experience with systems requirements, systems integration, and/or systems test.

• Ability to obtain Interim Secret U.S. government issued security clearance is required prior to start date.

Qualifications We Prefer

• Experience in the Defense Industry, and specifically with military systems; tactics, techniques, and procedures, as well as Department of Defense customer infrastructure experience.

• Understanding of the Systems Engineering product lifecycle

• Experience with performing performance analysis and presenting analytical and technical material

• Experience with DOORS, Cameo, or other digital engineering tools.

• Experience with model-based engineering and associated tools

• Experience in developing and managing requirements.

• Experience working in an integration lab, test facility, or in the field, supporting integration and/or verification.

• Experience with evaluating systems using simulated environments.

• Experience with generating technical documentation, such as trade studies, test plans, procedures, or technical reports.

What We Offer

• Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation.

• Relocation Eligible – Relocation assistance is available

Learn More & Apply Now!

• Please consider the following role type definition as you apply for this role.

• Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products.

• This position requires a security clearance. DCSA Consolidated Adjudication Services (DCSA CAS), an agency of the Department of Defense, handles and adjudicates the security clearance process. More information about Security Clearances can be found on the US Department of State government website here:  

• This position is an onsite role – Tucson, AZ: ,-az-location

• We Are RTX

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms

We're building safety-enhancing technology for aviation that will save lives. Automated aviation systems will enable a future where air transportation is safer, more convenient and fundamentally transformative to the way goods - and eventually people - move around the planet. We are a team of mission-driven engineers with experience across aerospace, robotics and self-driving cars working to make this future a reality.

As a Sr. Production and Engineering Technician at Reliable Robotics, you will be a part of the Production organization. This is a small but growing team of highly motivated people passionate about delivering quality products and services on time, with unquestionable value. You'll play a critical role in the build, operation, integration, test, diagnostics, inspection, and maintenance of highly reliable systems, including electro-mechanical assemblies, wiring harnesses, components, and subassemblies. You'll also help with the installation of those systems onto aircraft. Your work will support various product development phases such as prototype, research and development, aircraft certification, and recurring production. This is a fantastic opportunity to serve as the last line of defense for ensuring that our safety-critical systems are reliable and produced to the intended engineering requirements.

Responsibilities

• Build, operate, integrate, test, diagnose, inspect, and maintain highly reliable systems, including avionics and electromechanical assemblies, wire harnesses, and circuit card assemblies

• Read, interpret, and work from drawings, controlled documentation, and processes such as drawings, layouts, assembly procedures/work instructions, schematics, engineering drawings, and master parts lists

• Develop and improve manufacturing and installation instructions

• Assure product and process quality by testing finished-product and process capabilities

• Resolve product non-conformances and collaborate with the quality team to implement corrective actions

• Record work performed in a clear, precise, and complete manner

• Assist with the development of production and improvement processes

Basic Success Criteria

• 7+ years of professional experience building and testing electromechanical assemblies, fabrication, integration, or mechanical assembly experience

• 4+ years of hands-on experience reviewing technical designs and working from drawings, schematics, layouts, assembly/procedures, master parts lists, and other controlled documentation

• Ability to proficiently use a PC/Mac, Google Suite, manufacturing execution systems, JIRA, or equivalent tools

• Ability to lift 25-pound boxes to a height of 3-4 feet, with or without reasonable accommodation

Preferred Criteria

• IPC and/or J-STD certification

• Experience working in an electro-mechanical manufacturing company, a precision manufacturing company, or a high-volume manufacturing company

• Electro-mechanical assembly and prototype development experience

• Experience setting up and running tests and experiments

• Experience with electrical wiring

• Soldering experience

Our team is passionate about delivering on our commitments, solving hard problems, continuously improving, and helping the business succeed. We are constantly reevaluating our technologies, products, and capabilities. If you are a lifelong learner, you will love this environment. Get in on the ground floor and help us build the company.

The position will be located at our facility in Mountain View, California.

Must be willing to travel up to 10% of the time.

This position requires access to information that is subject to U.S. export controls. An offer of employment will be contingent upon the applicant's capacity to perform in compliance with U.S. export control laws.

All applicants are asked to provide documentation that legally establishes status as a U.S. person or non-U.S. person (and nationalities in the case of a non-U.S. person). Where the applicant is not a U.S. person, meaning not a (i) U.S. citizen or national, (ii) U.S. lawful permanent resident, (iii) refugee under 8 U.S.C. * 1157, or (iv) asylee under 8 U.S.C. * 1158, or not otherwise permitted to access the export-controlled technology without U.S. government authorization, the Company reserves the right not to apply for an export license for such applicants whose access to export-controlled technology or software source code requires authorization and may decline to proceed with the application process and any offer of employment on that basis.

At Reliable Robotics, our goal is to be a diverse and inclusive workforce. As an Equal Opportunity Employer, we do not discriminate on the basis of race, religion, color, creed, ancestry, sex, gender (including pregnancy, childbirth, breastfeeding, or related medical conditions), gender identity, gender expression, sexual orientation, age, non-disqualifying physical or mental disability or medical conditions, national origin, military or veteran status, genetic information, marital status, or any other basis covered by applicable law. All employment and promotion is decided on the basis of qualifications, merit, and business need.

If you require reasonable accommodation in completing an application, interviewing, completing any pre-employment testing, or otherwise participating in the employee selection process, please direct your inquiries to

Compensation Range: $125K - $145K