Si Engineering P C Jobs in Usa
29,498 positions found — Page 5
Provides Planned Maintenance (PM), safety testing, repairs, calibration, installation, routine and emergency service to general diagnostic and therapeutic medical equipment, as assigned by the Clinical Engineering (CE) Manager.
ESSENTIAL FUNCTIONSKnows, understands, incorporates and demonstrates the mission, vision and core values of Trinity Health and the Ministry Organization in leadership behaviors, practices and decisions.
Performs PM procedures on multiple types of general and specialized clinical equipment.
Performs PM procedures using manufacturers' recommendations, standards or code requirements, as well as industry acceptable processes as guidelines.
Performs Corrective Maintenance (CM) procedures including diagnosing problems using thermodynamic, electronic/electrical, mechanical, pneumatic, hydraulic, and/or other related sciences and documents results of activities performed to comply with all regulatory and standards requirements.
Notifies equipment users and Clinical Engineering Management of repair status and delays as necessary.
Interacts with clinical staff to understand and resolve operational problems in scheduling and completing PM procedures while minimizing interference to hospital departments.
Determines need for replacement parts and supplies, selects the most cost effective source, and submits properly completed parts request using established policies and guidelines.
Completes corrective and planned maintenance work order documentation.
Promotes teamwork by keeping others informed, participating effectively in group decision making, works to accomplish team objectives and projects, and solicits feedback about one's effectiveness as a team member.
Continually improves processes by seeking ways to eliminate and reduce waste.
Has authority (based on department guidelines) to order parts and supplies required for emergency service or repair of medical equipment. Recommends test equipment and spare equipment parts to the CE Manager or Lead Technician.
Provides on-call service coverage after normal business hours on a rotating basis, as assigned.
Performs other duties as assigned or requested by CE Manager.
Maintains a working knowledge of applicable Federal, State and local laws/regulations; the Trinity Health Integrity and Compliance Program and Code of Conduct; as well as other policies and procedures in order to ensure adherence in a manner that reflects honest, ethical and professional behavior.
MINIMUM QUALIFICATIONSAssociates of Applied Sciences degree in medical electronics, electronic technology or related field, including comparable military training or an equivalent combination of education and experience.
One to two-years experience performing corrective and planned maintenance on medical equipment per policy.
Must have a basic understanding of anatomy, physiology, and medical terminology.
Working knowledge and ability to use basic hand tools and test equipment specific to the field. Ability to train CE associates on use and application of select test equipment.
Must have knowledge and understanding of OSHA, NFPA, The Joint Commission, EOC, FDA and other specific regulations and standards pertaining to clinical equipment service and repair.
Must possess a personal presence that is characterized by a sense of honesty, integrity and caring with ability to inspire and motivate others to promote the philosophy, mission, vision, goals and values of Trinity Health, Ministry Organizations, and Clinical Engineering.
Must have basic understanding of personal computer operation, applications, and ability to input data using keyboard. Technician must be able to follow complex written instructions, perform tasks and document actions taken.
Ability to operate complex test equipment, analyze and interpret information provided by equipment and clinical staff to determine equipment operational condition.
Strong customer service and communications skills are required to interact with hospital personnel and vendors to achieve positive outcomes.
Ability to provide or coordinate in-service training to clinical/professional staff on medical device basic operational and safety functions.
PHYSICAL AND MENTAL REQUIREMENTS AND WORKING CONDITIONSMust be physically able to balance, bend, climb, crawl, crouch, kneel, reach, sit, squat, stand, twist, and walk.
Possess ability to mentally concentrate while being subject to stress, interruptions and changing work priorities.
Must be able to work and follow OSHA guidelines while in a hazardous environment(s) such as electrocution potentials, mechanical energies, bloodborne/airborne pathogens, dust and inclement weather, marked changes in temperature and/or humidity, radiation, fumes/vapors, sharp instruments/tools, hazardous liquids, and operating devices.
Must be able to hear speech, distinguish sounds, and speak.
Must have near vision, far vision, depth perception, and be able to distinguish colors.
Must have sensory ability to distinguish hot, cold, range of temperature, surfaces, fine motor skills, manual dexterity, and detect/distinguish odors.
Must be able to carry or lift up to 50 pounds routinely (50% of the time) and on occasion (5% of the time) up to 100 pounds.
Must be able to push or pull over 100 pounds frequently (20% of the time).
Maintains safe working environment for self, other associates, patients, visitors, and medical staff in accordance with applicable standards and procedures relevant to job duties.
Must be able to adapt to frequently changing work priorities.
Must be able to travel to the various Trinity Health, Ministry Organizations, subsidiaries, and/or training facilities.
Our Commitment
Rooted in our Mission and Core Values, we honor the dignity of every person and recognize the unique perspectives, experiences, and talents each colleague brings. By finding common ground and embracing our differences, we grow stronger together and deliver more compassionate, person-centered care. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other status protected by federal, state, or local law.
*At Securian Financial the internal position title isEngineering Senior Analyst or Engineering Consultant. The title and salary will be determined based on experience and applied skills.*
Position Summary:
Are you a hands-on engineer who enjoys designing, building, and supporting modern communication platforms? Do you like solving complex problems and working with teams that move quickly from idea to delivery? This role offers the opportunity to make an immediate impact.
As a member of the Telephony and Contact Center Technologies team, you will design, engineer, implement, and support Securian's enterprise telephony and contact center platforms. This role is focused on delivering secure, scalable, cloud-first communication solutions using RingCentral, NiCE CXone, and Cyara.
You will work closely with Contact Center Operations, Agile delivery teams, and technology partners to continuously improve customer and associate experiences across the enterprise.
Responsibilities include but not limited to:
Design, engineer, implement, and support enterprise UCaaS and CCaaS platforms
Provide daily operational support for cloud-based telephony, unified communications, SIP services, and IVR solutions
Qualifications:
Hands-on experience engineering and supporting cloud-based telephony or contact center platforms
Strong understanding of VoIP technologies, SIP, and call routing concepts
RingCentral and RingCentral Contact Center engineering
NiCE inContact / CXone administration and development
Cyara or similar modern telephony orchestration platforms
Experience designing and supporting UCaaS and CCaaS (including IVRs and contact center workflows) solutions in large enterprise environments
Solid knowledge of networking concepts related to real-time communications
Preferred Qualifications:
Supporting remote contact center agents
REST API integrations and automation
Scripting using PowerShell or Python
Workforce management, call recording, or speech technologies
PSTN carrier and phone number lifecycle management
This role plays a critical part in modernizing Securian's communication platforms and ensuring reliable, scalable experiences for customers and associates. You will have the opportunity to influence technical direction and deliver compelling solutions that matter.
#LI-Hybrid**This position willhave a hybrid working arrangement.**
Securian Financial believes in hybrid work as an integral part of our culture. Associates get the benefit of working both virtually and in our offices. Ifyou'reina commutable distance (90 minutes)you'lljoin us 3 days each week in our offices to collaborate and build relationships. Our policy allows flexibility for the reality of business and personal schedules.
The estimated base pay range for this job is:
$72,000.00 - $134,000.00Pay may vary depending on job-related factors and individual experience, skills, knowledge, etc. More information on base pay and incentive pay (if applicable) can be discussed with a member of the Securian Financial Talent Acquisition team.
Be you. With us. At Securian Financial, we understand that attracting top talent means offering more than just a job - it means providing a rewarding and fulfilling career. As a valued member of our high-performing team, we want you to connect with your work, your relationships and your community. Enjoy our comprehensive range of benefits designed to enhance your professional growth, well-being and work-life balance, including the advantages listed here:
Paid time off:
We want you to take time off for what matters most to you. Our PTO program provides flexibility for associates to take meaningful time away from work to relax, recharge and spend time doing what's important to them. And Securian Financial rewards associates for their service by providing additional PTO the longer you stay at Securian.
Leave programs: Securian's flexible leave programs allow time off from work for parental leave, caregiver leave for family members, bereavement and military leave.
Holidays: Securian provides nine company paid holidays.
Company-funded pension plan and a 401(k) retirement plan: Share in the success of our company. Securian's 401(k) company contribution is tied to our performance up to 10 percent of eligible earnings, with a target of 5 percent. The amount is based on company results compared to goals related to earnings, sales and service.
Health insurance: From the first day of employment, associates and their eligible family members - including spouses, domestic partners and children - are eligible for medical, dental and vision coverage.
Volunteer time: We know the importance of community. Through company-sponsored events, volunteer paid time off, a dollar-for-dollar matching gift program and more, we encourage you to support organizations important to you.
Associate Resource Groups: Build connections, be yourself and develop meaningful relationships at work through associate-led ARGs. Dedicated groups focus on a variety of interests and affinities, including:
Mental Wellness and Disability
Pride at Securian Financial
Securian Young Professionals Network
Securian Multicultural Network
Securian Women and Allies Network
Servicemember Associate Resource Group
For more information regarding Securian's benefits, please review our Benefits page.
This information is not intended to explain all the provisions of coverage available under these plans. In all cases, the plan document dictates coverage and provisions.
Securian Financial Group, Inc. does not discriminate based on race, color, religion, national origin, sex, gender, gender identity, sexual orientation, age, marital or familial status, pregnancy, disability, genetic information, political affiliation, veteran status, status in regard to public assistance or any other protected status. If you are a job seeker with a disability and require an accommodation to apply for one of our jobs, please contact us by email at , by telephone (voice), or 711 (Relay/TTY).
To view our privacy statement click here
To view our legal statement click here
Remote working/work at home options are available for this role.
Central & Southern Illinois • Paid Internship • Summer / Flexible
This isn't a coffee-and-copies internship. You'll be on real job sites, working on real projects, learning how heavy civil construction actually gets built.
About KCIKinney Contractors is one of the fastest-growing heavy civil contractors in Illinois. We self-perform concrete paving, earthwork, utilities, and structures on IDOT and municipal projects — the kind of infrastructure work you're studying in school. Our revenue has grown substantially, and we're building a team that can keep scaling.
We're owner-operated, which means decisions are fast, politics are minimal, and interns don't get lost in the machine. You'll work alongside project managers, superintendents, and estimators who know your name.
What You'll Actually DoYou'll embed with our project management and field teams on active construction projects. The goal is simple: teach you how projects really work, from bid day to final closeout. Here's what that looks like day-to-day:
▸ Assist project managers with budgeting, scheduling, and production tracking
▸ Track and log change orders — learn how scope changes move through a project
▸ Verify field quantities for billing and help prepare pay applications
▸ Coordinate with subcontractors on scheduling and deliverables
▸ Perform plan takeoffs and attend pre-bid meetings with estimators
▸ Support project closeout activities — punch lists, final documentation, as-builts
▸ Spend time on job sites understanding how plans translate to dirt, concrete, and pipe
▸ Learn how to set up GPS / stringless equipment
Required:
▸ Currently pursuing a BS in Construction Management or Civil Engineering
▸ Ability to read construction plans and specifications
▸ Strong math and analytical skills
▸ Clear written and verbal communication
▸ Valid driver's license and ability to travel to job sites
▸ Willingness to work outdoors in all weather conditions
Preferred (not required):
▸ 1+ year of construction experience (field, office, college, or family business - it all counts)
▸ Familiarity with HCSS HeavyJob or HeavyBid
▸ Proficiency in Microsoft Project, Bluebeam, or Excel
▸ OSHA 10 or OSHA 30 certification
Why Intern at KCIMost construction internships have you filing paperwork in a trailer. We'll put you where the work is — because that's where you learn. You'll get direct mentorship from experienced PMs and supers who want to teach, not just delegate.
We hire our best interns full-time after graduation. Several of our current employees started as KCI interns. This is a pipeline, not a placeholder.
What we offer:
▸ Competitive hourly pay
▸ Real project exposure — not busy work
▸ Direct mentorship from senior project managers and field leaders
▸ Flexible scheduling around your academic calendar
▸ A clear path to full-time employment for strong performers
- Help us build the roads to a better future.
We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth.
Find your future with us.Boeing Commercial Airplanes (BCA) is hiring for Senior Product Review Engineers (Liaison Engineers) to join the 787 Production Engineering team located in North Charleston, SC.This position includes a 9-to-12-month Boeing Training Rotation Program and will require a flexible schedule, which may involve assignments on 1st, 2nd, or 3rd shift, as well as occasional overtime, weekends, or holidays based on business needs.The Product Review Engineers will perform/support troubleshooting, Root Cause Corrective Action (RCCA) technical analysis, and provide solutions to non-conforming products.
They will work directly with cross functional and production engineering teams to meet production program objectives.This position involves daily exposure to a factory environment which includes stairs, trip hazards, high noise areas, chemical hazards (breathing and handling), and entering airplanes during their many stages of building.Position Responsibilities:Applies knowledge of Boeing design principles to assess and resolve product/process issues through the product lifecycleLeads research of technical, operational and quality issues that cannot be resolved by customer and designs interim and final engineering solutionsLeads others to analyze, conduct root cause analysis and develop dispositions for design non-conformancesUses innovative approaches and unique applications to address complex nonconforming conditions and to detect deviationsAnalyzes reported problems for potential safety issues; recommends and manages complex resolutions.
Leads development of interim and final solutions.Provides design phase subject matter expertise by supporting Integrated Product Teams (IPT) and participating in design reviewsRepresents the engineering community in the build through post-production environmentDevelops customer correspondence for continued safe operation and maintenance of equipmentLeads activities for on-site disabled product repair teams and accident investigation or support teamsDesigns appropriate jacking and shoring schemesLeads the design of interim structural repairs and conducts static strength analysisDevelops and leads non-destructive test procedures, tools and standardsBasic Qualifications (Required Skills/Experience):Bachelor of Science degree in Engineering, Engineering Technology (including Manufacturing Technology), Computer Science, Data Science, Mathematics, Physics or Chemistry.
Applicants must have completed all degree requirements by the application date.10+ years of Engineering experience5+ years of experience in one or more of the following engineering fields: (airplane systems, aerodynamics, structures, propulsion, systems engineering, certification, or safety)5+ years of experience in reading, interpreting, and generating electrical schematics and technical specifications Experience with or knowledge of structural design principles for aircraft primary structure (e.g., fatigue, damage tolerance, corrosion, stress analysis, statics, materials strength, material characteristics, and repair techniques)Must be willing to work variable shifts, including weekends, holidays, and overtimePreferred Qualifications (Desired Skills/Experience): ABET accredited degree5+ years of experience working in a cross-functional environmentCurrent or Previous Member of the Materials Review Board (MRB)Previous Aerospace or Marine repair, overhaul, maintenance, and/or engineering experienceExperience troubleshooting complex integrated systemsExperience interpreting and creating strength analyses for metals and composite materialsMaterial Review Board Certification experience or similar Liaison Engineering experience.Aerospace experience, fabrications, manufacturing, and/or additive manufacturing experience.Experience working with Notice of Escapements (NOE) and Request for Customer Notifications (RCN)Production engineering experienceRelevant technological knowledgeExcellent problem-solving skillsAbility to lead, work independently and in a team environmentConflict of Interest: Successful candidates for this job must satisfy the Company's Conflict of Interest (COI) assessment process.Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.Pay & Benefits:At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and several programs that provide for both paid and unpaid time away from work.The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.Pay is based upon candidate experience and qualifications, as well as market and business considerations.Summary Pay Range: $126,650
- $171,350Applications for this position will be accepted until Mar.
23, 2026Export Control Requirements: This position must meet U.S.
export control compliance requirements.
To meet U.S.
export control compliance requirements, a "U.S.
Person" as defined by 22 C.F.R.
§120.62 is required."U.S.
Person" includes U.S.
Citizen, U.S.
National, lawful permanent resident, refugee, or asylee.Export Control Details: US based job, US Person requiredEducation Bachelor's Degree or Equivalent RequiredRelocation This position offers relocation based on candidate eligibility.Visa Sponsorship Employer will not sponsor applicants for employment visa status.Shift This position is for variable shiftEqual Opportunity Employer:Boeing is an Equal Opportunity Employer.
Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth.
Find your future with us.Boeing Commercial Airplanes (BCA) 787 Airframe Team is seeking Mechanical & Structural Engineering Managers (Level K) to join our Systems Stress, Payloads Stress or Seats Stress teams in North Charleston, SC.As the Engineering Manager, you will lead a team of analysis engineers supporting the 787 Aircraft Systems or Payloads.
The statement of work will include future design, factory and fleet support, as well as interaction with the supply chain.
The ideal candidate is a proactive, servant-minded leader who fosters a positive, collaborative work environment through clear communication, mentoring, and coaching.
They will effectively manage multiple concurrent initiatives including both short and long-term assignments, build strong cross-functional relationships and promote a culture of engineering excellence and safety.
Using sound engineering judgment, this leader will guide their team to deliver efficient, practical solutions that satisfy product safety requirements and business objectives.This position may require domestic and international travel as needed (approximately 10%) to support business and program goals.Primary Responsibilities:Staff and budget planning, as well as implementing best practices in program managementDevelop and execute business plans, policies, and procedures while formulating organizational and technical strategiesAcquire resources, provide technical management of suppliers, and spearhead process improvementsBuild and maintain relationships with customers, stakeholders, peers, partners and direct reports will be essentialProvide oversight and approval of technical approaches, products and processes, while managing, developing, and motivating employeesMentor and develop team member's technical and leadership capabilitiesHelp facilitate daily team stand ups utilizing OPD best practicesProactive collaboration with customers and support organizations, build positive relationships (i.e.
LE, Prod.
Engineering, Operations, Fleet Support teams)Manage daily team priorities to effectively utilize team resourcesCommunicate with lead engineers, management and team membersEstablish clear RAA for lead engineers, foster and develop lead pipelineDevelop and execute business plans, policies and procedures and develop organizational and technical strategiesSupport hiring of engineering teamProvide technical guidance and oversite to team and partnerMaintain and update BOE/EAC/LRBP tools and processBasic Qualifications (Required Skills/ Experience):Bachelor of Science degree in Engineering (with a focus on Mechanical, Civil, Aerospace, Aeronautical, or Material Sciences)5+ years of experience in the Aerospace Industry1+ years of experience leading cross-functional teams1+ years of experience in using project management methodologies, including developing project plans, performance management, and managing issues and risksExperience managing projects and initiatives through to their completion/implementation hand-off pointPreferred Qualifications (Desired Skills/Experience):3+ years of experience leading aerospace design engineering teams and integrating within a global supply base and product value streams3+ years of experience with Boeing Commercial AirplanesKnowledge of Boeing products and processesKnowledge of Boeing 787 Aircraft Systems or Payloads or SeatsKnowledge of Boeing Structural Analysis MethodsExperience with commercial aircraft certification processes and regulationsDemonstrated ability in team building, coaching, and employee development to enhance team performance and engagementDrug Free Workplace:Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.Pay & Benefits:At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and several programs that provide for both paid and unpaid time away from work.The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.Pay is based upon candidate experience and qualifications, as well as market and business considerations.Summary Pay Range: $137,700
- $186,300Applications for this position will be accepted until Mar.
24, 2026Export Control Requirements: This position must meet U.S.
export control compliance requirements.
To meet U.S.
export control compliance requirements, a "U.S.
Person" as defined by 22 C.F.R.
§120.62 is required."U.S.
Person" includes U.S.
Citizen, U.S.
National, lawful permanent resident, refugee, or asylee.Export Control Details: US based job, US Person requiredEducation Bachelor's Degree or Equivalent RequiredRelocation This position offers relocation based on candidate eligibility.Visa Sponsorship Employer will not sponsor applicants for employment visa status.Shift This position is for 1st shiftEqual Opportunity Employer:Boeing is an Equal Opportunity Employer.
Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
L3Harris is the Trusted Disruptor in defense tech. With customers' mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security.
Job Title: Sr. Specialist, Integration & Test Engineering (Space Optical Systems)
Job Code: 33755
Job Location: Wilmington, MA
Job Schedule: 9/80 (Every other Friday off!)
Relocation: Relocation assistance is available to qualified applicants
Job Description:
On the L3Harris team, your job is to secure the world. We don't work here just for the advanced technology and equipment: we work here because we know what - and who - we're protecting! From families to the intelligence community, and from our climate to our men and women in uniform - we're making the world a safer place!
L3Harris Space Superiority group has an opening for a Integration & Test Engineer to join our team of qualified, diverse individuals. This position will be in Wilmington, MA. The individual will work in a fast-paced environment with significantly diverse assignments and a collaborative team setting.
AgileEO specializes in space-based, small aperture visible and IR telescopes with integrated electromechanical devices used for motion and focus control. The successful candidate will support the program technical leads (Lead or Chief Systems Engineer, IPT Lead) by performing technical analysis, managing specifications, and generating design review and technical documents. Additional responsibilities include supporting the test and design verification, requirements sell off, end item data package (EIDP) generation efforts.
Essential Functions:
* System Design and Integration: Develop and integrate advanced electro-optical systems for space-based applications, ensuring compliance with all relevant specifications and mission requirements.
* Technical Leadership: Provide technical leadership and guidance in systems engineering, including test development, requirements verification and validation (V&V).
* Testing and Validation: Design, plan, and execute test procedures for electro-optical components and systems. Analyze test data to validate system performance against requirements. Identify and troubleshoot issues, propose corrective actions, and implement solutions.
* Requirements Management: Define, manage, and maintain system and sub-system level requirements, ensuring traceability and compliance throughout the project lifecycle.
* Project Execution: Lead and coordinate multidisciplinary engineering teams throughout the project lifecycle, from conceptual design to final system delivery and operation.
* Documentation and Reporting: Generate and maintain detailed technical documentation, including test plans, procedures, work instructions, test reports, and anomaly reports.
* Trade Studies: Develop and evaluate trade studies to support decision-making processes, ensuring accuracy and completeness.
* Stakeholder Communication: Communicate effectively with internal and external stakeholders, including subcontractors and U.S. Government customers, to ensure alignment and project success.
* Standards Compliance: Ensure all engineering activities adhere to industry standards, regulatory requirements, and best practices.
* Collaboration: Work closely with cross-functional teams, including engineering, production, and quality assurance, to ensure successful system integration and test.
* Written and Oral Communication: Demonstrate excellent written, oral, and presentation communication skills. Prepare effective presentations to communicate technical information to non-technical professionals.
* Continuous Improvement: Participate in process improvement initiatives to enhance test methodologies and system integration practices.
* Candidate must be eligible to obtain a DoD security clearance.
Qualifications:
* Bachelor's degree in Engineering, Physics, or other related scientific discipline and 6 years of relevant EO/IR systems engineering work experience. Alternatively, a graduate degree with a minimum of 4 years of prior related experience, or in lieu of a degree, a minimum of 10 years of prior related experience.
* 3+ years experience working with systems integration and test
* Prior or current experience working with eletro-optical/imaging systems
* Prior or current experience working with space environment considerations and testing protocols
* 3+ years experience with engineering and simulation software tools, such as MATLAB
Preferred Additional Skills:
* Active Secret or Top Secret/SCI clearance is highly preferred
* Demonstrated experience with space systems engineering, including knowledge of space environments, satellite systems, and space mission design. Familiarity with NASA-STD-1540 and/or NASA-STD-7002.
* Experience in leading technical teams, managing projects, and coordinating cross-functional engineering activities.
* Proficient in Model-Based Systems Engineering (MBSE) tools such as DOORs, CAMEO, CREO, JIRA, and SysML.
* Excellent verbal and written communication skills, with the ability to clearly convey complex technical information to diverse audiences.
* Strong analytical and problem-solving abilities, with a proven track record of tackling complex engineering challenges.
* Ability to work effectively in a team environment and collaborate with multidisciplinary teams to achieve project goals.
* Working knowledge of Microsoft Word, Excel, Visio, PowerPoint, and other relevant
In compliance with pay transparency requirements, the salary range for this role in Massachusetts is $1119,500 - $222,500 . This is not a guarantee of compensation or salary, as final offer amount may vary based on factors including but not limited to experience and geographic location. L3Harris also offers a variety of benefits, including health and disability insurance, 401(k) match, flexible spending accounts, EAP, education assistance, parental leave, paid time off, and company-paid holidays. The specific programs and options available to an employee may vary depending on date of hire, schedule type, and the applicability of collective bargaining agreements.
L3Harris Technologies is proud to be an Equal Opportunity Employer. L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law.
Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information.
By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions.
L3Harris Technologies is an E-Verify Employer. Please click here for the E-Verify Poster in English ( ) or Spanish ( ) . For information regarding your Right To Work, please click here for English ( ) or Spanish ( ) .
Location: Eureka, MO
Position Summary:
The Intern/Co-Op position at Maxcess Rotometrics is targeting Junior or Senior level undergraduate students currently enrolled in an Accredited engineering program at a College or University. This position will provide an opportunity for the student to work alongside the engineering team to support the design and manufacturing of converting tools (rotary dies, print cylinders, etc). This type of tooling is used to convert materials into labels for wine/beer bottles, medical and automotive devices (band aid's, gaskets) and non-wovens (diapers, face masks).
Target Degree Programs:
Mechanical Engineering, Software Engineering, Computer Engineering, Computer Science
Preferred Qualifications:
Self-starter, hands on, clear communicator, strong mechanical and/or software programming aptitude, desire/curiosity for machine design, controls and troubleshooting, ability to create reports and presentations, ability to clearly report out on test results and recommendations. Understanding of lean manufacturing processes, experience with machine controls (CAM, PLC, VBA, Python), servos and step motors, and interest in machine design and automation. Establishing MS Sharepoint work flow a plus.
Preferred Skills:
Ability to work independently and in a team environment, proficient in 2D design/drawings along with 3D Modeling, able to read component blueprints, Microsoft Office. Programming skills (C, C++,.NET, VB), ERP System understanding and FEA a plus.
Roles and Responsibilities:
Research current products, bill of materials and develop understanding of how the product flows thru production. This role will support engineering team in a continuous improvement environment with projects that may span multi sites. Additional duties may include data entry, BOM support, automation projects to streamline processes, periodic testing, and results summary with report out, light design work to support New Products or Research into new technology, based on business need and skill set of the student.
Project List:
- Flex Die process optimization: Chrome/passivation, fixture design
- Tooling & Fixture Design assist: 3D modeling, DFM
- Support Continuous Improvement efforts: Improve workflow, submission quality, and dashboards
- Support in Automated Assembly & Measurements: Fixture Design, Analysis and Testing
- Support Kaizen events, focusing on product flow/process improvements: Safety, Quality, Design, Delivery, Cost
United States of America Location:
AZ201: RMS AP Bldg 801 1151 East Hermans Road Building 801, Tucson, AZ, 85756 USA Position Role Type:
Onsite U.S. Citizen, U.S. Person, or Immigration Status Requirements:
Active and transferable U.S. government issued security clearance is required prior to start date. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance Security Clearance:
Secret - Current At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today's mission and stay ahead of tomorrow's threat. Our team solves tough, meaningful problems that create a safer, more secure world.
Lifecycle Engineering is responsible for ensuring our products are Safe, Reliable, Maintainable and delivered on time. Life Cycle Engineering consists of multiple disciplines that support engineering, our program offices and our customers. Our Life Cycle Engineering disciplines participate in the total life cycle of our products from conception to deactivation. Our focus area is product support, including the following engineering disciplines: Reliability, System Safety and Supportability. We are looking for a Principal Reliability Engineer to join our team located in Tucson, AZ.
What You Will Do:
Develop and implement reliability strategy across multiple product phases including development, production and sustainment.
Support and/or lead a reliability engineering team consisting of varying levels of experience.
Lead analysis efforts supporting system design with respect to Product Reliability, Maintainability, and Failure Reporting and Corrective Action.
Lead in reliability disciplines including FMECA, Predictions, Derating, ESS and ALT.
Coach other Reliability engineers and work with functional leadership in identifying and implementing Reliability engineering development.
Review technical documentation for accuracy and compliance with existing standards.
Qualifications You Must Have:
Typically requires a degree in Science, Technology, Engineering or Mathematics (STEM) and a minimum of 8 years of prior relevant experience.
Experience with reliability requirements, analyses and/or test methodology development.
Active and transferable U.S. government issued security clearance is required prior to start date. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance.
Qualifications We Prefer:
Experience with FMECA, Reliability Predictions, ESS, Derating, FRACA.
Experience in leading multidisciplinary engineering teams.
Customer focus and collaboration skills.
Excellent written and oral communication skills; knowledge of MS Office tools, and experience in the preparation and presentation of briefing material.
Ability to review technical documentation for accuracy and compliance with existing standards with the ability to identify concerns, suggest solutions, and follow through to closure.
What We Offer:
Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation.
Relocation Eligibility - Yes
Please consider the following role type definition as you apply for this role.
Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products.
Clearance Information: This position requires a security clearance. DCSA Consolidated Adjudication Services (DCSA CAS), an agency of the Department of Defense, handles and adjudicates the security clearance process. More information about Security Clearances can be found on the US Department of State government website here:
Tucson, AZ:
As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.
The salary range for this role is 107,500 USD - 204,500 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate's work experience, location, education/training, and key skills. Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement. Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company's performance. This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply. RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act.
Privacy Policy and Terms:
Click on this link to read the Policy and Terms
United States of America Location:
AZ201: RMS AP Bldg 801 1151 East Hermans Road Building 801, Tucson, AZ, 85756 USA Position Role Type:
Onsite U.S. Citizen, U.S. Person, or Immigration Status Requirements:
Active and transferable U.S. government issued security clearance is required prior to start date. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance Security Clearance:
Secret - Current At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today's mission and stay ahead of tomorrow's threat. Our team solves tough, meaningful problems that create a safer, more secure world.
Lifecycle Engineering is responsible for ensuring our products are Safe, Reliable, Maintainable and delivered on time. Life Cycle Engineering consists of multiple disciplines that support engineering, our program offices and our customers. Our Life Cycle Engineering disciplines participate in the total life cycle of our products from conception to deactivation. Our focus area is product support, including the following engineering disciplines: Reliability, System Safety and Supportability. We are looking for a Principal Reliability Engineer to join our team located in Tucson, AZ.
What You Will Do:
Develop and implement reliability strategy across multiple product phases including development, production and sustainment.
Support and/or lead a reliability engineering team consisting of varying levels of experience.
Lead analysis efforts supporting system design with respect to Product Reliability, Maintainability, and Failure Reporting and Corrective Action.
Lead in reliability disciplines including FMECA, Predictions, Derating, ESS and ALT.
Coach other Reliability engineers and work with functional leadership in identifying and implementing Reliability engineering development.
Review technical documentation for accuracy and compliance with existing standards.
Qualifications You Must Have:
Typically requires a degree in Science, Technology, Engineering or Mathematics (STEM) and a minimum of 8 years of prior relevant experience.
Experience with reliability requirements, analyses and/or test methodology development.
Active and transferable U.S. government issued security clearance is required prior to start date. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance.
Qualifications We Prefer:
Experience with FMECA, Reliability Predictions, ESS, Derating, FRACA.
Experience in leading multidisciplinary engineering teams.
Customer focus and collaboration skills.
Excellent written and oral communication skills; knowledge of MS Office tools, and experience in the preparation and presentation of briefing material.
Ability to review technical documentation for accuracy and compliance with existing standards with the ability to identify concerns, suggest solutions, and follow through to closure.
What We Offer:
Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation.
Relocation Eligibility - Yes
Please consider the following role type definition as you apply for this role.
Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products.
Clearance Information: This position requires a security clearance. DCSA Consolidated Adjudication Services (DCSA CAS), an agency of the Department of Defense, handles and adjudicates the security clearance process. More information about Security Clearances can be found on the US Department of State government website here:
Tucson, AZ:
As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.
The salary range for this role is 107,500 USD - 204,500 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate's work experience, location, education/training, and key skills. Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement. Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company's performance. This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply. RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act.
Privacy Policy and Terms:
Click on this link to read the Policy and Terms
The Manufacturing Engineering Supervisor is responsible for providing leadership to the Manufacturing Engineering team to advance manufacturing by reducing cost, improving quality, expanding safety, and increasing on-time delivery. This position functions as a working supervisor and is expected to both lead the team and directly perform hands-on manufacturing engineering activities as the business needs require.
PRINCIPAL DUTIES AND RESPONSIBILITIES (ESSENTIAL FUNCTIONS)
- Leading project teams to acquire, integrate and implement technologies into manufacturing and production processes.
- Ensure appropriate procedures and support documentation are maintained properly and efficiently. Includes: Manufacturing processes, NC programming, tooling, and tool design documentation.
- Manages capital equipment requisitions, ensuring competitive cost, process fulfillment, and quality needs are satisfied.
- Supports new product development to ensure manufacturability, cost, and quality from design concept to production release.
- Manages shop floor tooling and facility operating expenses.
- Assist and support plant and facility maintenance and improvements.
- Serve as a player-coach by executing hands-on manufacturing engineering tasks in addition to supervisory responsibilities.
- Manage the design/build of tooling and fixtures to support production and launch new parts in production.
EDUCATION AND EXPERIENCE
- Bachelor's degree (or equivalent) in Manufacturing Engineering, Mechanical Engineering, or Industrial Engineering preferred.
- 10 years' experience in an Engineering/Operations environment with 3-5 years in a Managerial position.
KNOWLEDGE, SKILLS AND ABILITIES
- Strong organizational and interpersonal skills are a necessity.
- Ability to provide and give work direction within the department and communicate with all aspects/areas of the company.
- Attention to detail, with a high degree of accuracy.
- General Office computer skills. Ability to understand and navigate in Excel - ability to analyze large amounts of data and combine data from multiple sources.
- Requires effective communication skills in working with all departments.
PHYSICAL DEMANDS
- Physical demands are typical of an office position including extended periods of sitting, extensive use of a personal computer and telephone.
- Position requires movement around the facilities.
- Occasional handling of material and components.
WORKING CONDITIONS
Normal manufacturing and office environment. When working occasionally in some shop areas, personal protection equipment (PPE) will be recommended and/or required (safety shoes, safety glasses w/side shields, hearing protection, face shield, gloves, apron and boots). Must have the ability to support extended business hours to meet customer business needs.
DISCLAIMER
The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not intended to be construed as an exhaustive list of all responsibilities, duties and skills required of personnel so classified.
QUALITY
Quality encompasses all aspects of DeZURIK, Inc.'s business, and every team member shares the responsibility to prevent the occurrence of any nonconformity relating to product, process, and the quality system. All team members have an obligation to identify and record any such nonconformity, and, through designated channels, initiate and recommend solutions.
SALARY AND BENEFITS
DeZURIK offers a competitive base salary in the $86,158 to $107,698 range, based on experience and qualifications, along with annual bonus opportunities tied to performance.
Beyond pay, our market-leading benefits are designed to support your wellbeing. These include medical, dental, vision, and life insurance, as well as short- and long-term disability coverage. DeZURIK also provides a health savings account with company match, a retirement plan for employer contributions through Vanguard, and access to the Granite Assistance Fund for support when it's needed most. We value time for rest and personal growth, offering generous paid time off, including volunteer time off and paid holidays.
Please note: Sponsorship is not available for this role.
#LI-JW1
