Shiftkey Llc Ein Number Jobs in Usa
3,834 positions found — Page 8
CNC Machinist (1st Shift)
About the Organization
Applied Aerospace & Defense (Applied) is a premier provider of advanced design, engineering, and vertically integrated manufacturing solutions for leading and next-generation space and defense technology companies. Applied builds complex hardware for extreme operating environments and is focused on three core markets: Space and Launch Systems, Defense Aviation and Airborne Systems, and C5ISR and Precision Strike Systems. With decades of space and defense manufacturing heritage, Applied combines deep material science and IP-enabled process expertise with the ability to enable rapid prototyping, enhance new product development, and responsively scale production. Across its nationwide infrastructure of advanced manufacturing facilities, Applied continuously supports a balanced mix of next-generation technology and platform development, large scale production programs, and aftermarket sustainment for enduring platforms.
EOE Statement
Applied Aerospace and Defense is an equal opportunity employer.
Description
FUNCTION:
Set up, operate, troubleshoot and perform work on a variety of machinery. Be flexible, willing and capable of being trained on additional machines. Perform work at a consistently high level of quality. Be reliable in consistency of work and willingness to work outside of core area of expertise.
Position Requirements
TYPICAL DUTIES:
Must be capable & willing to set up operations that have previously been proven out independently without oversight of a leadman or CNC programmer.
Must be capable of running a minimum of two of the following machine types: 3 and 4 axis Horizontal and Vertical Machining Centers, 5 axis machining centers, Vertical Turret Lathes, Cylindrical Grinders, Mill/Turn machines, CNC boring machines, Horizontal lathes, manual machines.
Must be willing to perform work on machines throughout the shop, not only the machines that are within the person's core area of expertise. For example: must be willing to perform work on a Mitsubishi 4 axis machining center even when the person normally runs a Mazak 730 Variaxis.
Must be capable & willing to identify opportunities for improvement in tooling, cutting methods, mistake proofing & work instruction documentation.
Must possess a skill level that eliminates errors that cause nonconforming material and maintain a consistent level of high quality work. Identify non-conformances at time of occurrence. Recognize opportunities for non-conformances and notify management of need for action.
Actively participate in various aspects of Continuous Improvement projects which may include but is not limited to 5S, TPM, kaizen events, and set-up reduction events, which is aligned with the commitment to continuous improvement activities in Article II of the collective bargaining agreement.
Must work safely at all times. Participate in safety improvement initiatives by raising any safety concerns and helping to come up with corrective actions.
Must be capable & willing to assist or train other employees in this or lower classifications as needed.
Refer difficulties to leader or supervisor as appropriate
May be assigned to carry out tasks, not specifically listed, within the scope and skill level of this job description in support of department or cell objectives and to develop individuals' skills.
Shift
-not applicable-
Full-Time/Part-Time
Full-Time
Location
Applied Aerospace & Defense, Newington
Category
Manufacturing
Req Number
MAN-26-00002
Position
All Around Machinist - A
Close Date
Post Internal Days
0
Number of Openings
1
Exempt/Non-Exempt
Non-Exempt
Hiring Manager(s)
This position is currently accepting applications.
Apply Now
Lathe Machinists - 1st & 2nd Shifts
About the Organization
Applied Aerospace & Defense (Applied) is a premier provider of advanced design, engineering, and vertically integrated manufacturing solutions for leading and next-generation space and defense technology companies. Applied builds complex hardware for extreme operating environments and is focused on three core markets: Space and Launch Systems, Defense Aviation and Airborne Systems, and C5ISR and Precision Strike Systems. With decades of space and defense manufacturing heritage, Applied combines deep material science and IP-enabled process expertise with the ability to enable rapid prototyping, enhance new product development, and responsively scale production. Across its nationwide infrastructure of advanced manufacturing facilities, Applied continuously supports a balanced mix of next-generation technology and platform development, large scale production programs, and aftermarket sustainment for enduring platforms.
EOE Statement
Applied Aerospace and Defense is an equal opportunity employer.
Description
**$2500 SIGN-ON BONUS**
Essential Duties & Responsibilities:
- Set-up and operate Horizontal and Vertical CNC Lathes with Fanuc controls according to engineering specifications, instructions, GD&T and operation sheets. Knowledge of manual machines is a plus.
- Select appropriate cutting tools, fixtures and tool holders for a given job.
- Run similar jobs of short cycle times for extended periods of time where manufacturing processes are stable and do not require frequent change.
- Read and interpret engineering instructions, travelers, and blueprints and be familiar with geometric tolerances and principles.
- Operate more than one machine at a time, one to two machines depending on the nature of the job and its complexity, occasionally operating more than two machines depending on operator skill and familiarity with a given job.
- Must perform routine maintenance on assigned production equipment, i.e., maintain cleanliness of work area and machinery, check machinery fluids and alert maintenance personnel and/or supervisor of malfunctions.
Operate lifting and handling equipment such as hand truck, pallet jack, or overhead hoist to maneuver in-process or finished components to desired location.
Position Requirements
Required Knowledge, Skills, & Abilities:
- Knowledgeable of in-process inspection techniques, standards, and requirements. Able to use and interpret precision measuring devices such as micrometers, verniers, and various hand tools, i.e., gauges to verify the accuracy of dimensional characteristics of components.
- Knowledge of metal characteristics in a production setting is desirable.
- Knowledge of programming code, canned cycles, threading & boring jaws and makes program edits.
- Machinists must have good verbal and written communication skills; good math skills and good interpersonal skills. Must work well with colleagues, supervision and management.
Education & Experience Required:
- 7 - 10 years Vertical or Horizontal CNC Lathe machining experience in a manufacturing environment, preferably aerospace.
- Fully capable of reading, understanding, and following written and oral work instructions in English.
- Ability to lift or transfer components or objects of no more than 50 pounds.
- HS diploma or GED.
Shift
Various Shifts
Full-Time/Part-Time
Full-Time
Location
Applied Aerospace & Defense, Enfield
Category
Manufacturing
Req Number
SKI-22-00001
Position
Machinist - Lathe 2nd Shift
Close Date
Post Internal Days
0
Number of Openings
1
Exempt/Non-Exempt
Non-Exempt
Hiring Manager(s)
Paula Inglis
This position is currently accepting applications.
Apply Now
Maintenance Technician
About the Organization
Applied Aerospace & Defense (Applied) is a premier provider of advanced design, engineering, and vertically integrated manufacturing solutions for leading and next-generation space and defense technology companies. Applied builds complex hardware for extreme operating environments and is focused on three core markets: Space and Launch Systems, Defense Aviation and Airborne Systems, and C5ISR and Precision Strike Systems. With decades of space and defense manufacturing heritage, Applied combines deep material science and IP-enabled process expertise with the ability to enable rapid prototyping, enhance new product development, and responsively scale production. Across its nationwide infrastructure of advanced manufacturing facilities, Applied continuously supports a balanced mix of next-generation technology and platform development, large scale production programs, and aftermarket sustainment for enduring platforms.
EOE Statement
Applied Aerospace and Defense is an equal opportunity employer.
Description
As a member of the Maintenance team this role is responsible for effectively troubleshooting mechanical and electrical issues on CNC equipment including aligning equipment and reading schematics. Be familiar with milling and turning equipment. This role is an hourly (non-exempt) classified position.
Pay Range: $45 to $55 per hour
Position Requirements
- Perform mechanical repairs (and rebuild) on all machines
- Perform machine leveling and alignment on all machines
- Pull and replace machine linear guides and ball screws.
- Able to work with complex NC machine up to & including 5 Axis
- Electrical & Electronic: Diagnose, locate and correct malfunctions of electrical & electronic system such as machine controls, recorders, servo/axis drives, servo motors, defective transformers, relays, contactors, fuses, sensors, etc.
- Knowledge of OEM machine controllers (FANUC, Siemens and NIT).
- Working knowledge of tool Probing function for CNC Mill Machines
- Support with scheduling PM, reading report, diagrams and drawings
- Plan, layout, and fabricate replacement parts for major rebuilding of precision machine tools where set up and operation to exacting tolerances is required
- Plan methods required to maintain, test, repair, or modify various types of industrial electronic controls and systems.
- Analyze and coordinate resolutions of technical problems or assist when solving problems including contacts outside own department as required.
- Interface with manufacturers on line tech support when needed
- Ability to work overtime as required by Company
- Recommend improved work methods and procedures, assist in training employs
- Ability to write routine reports and correspondence
- Must adhere to all OSHA and EHS policies and all related procedures
- Perform related work as required
Minimum Qualifications
- High school diploma or General Education Degree (GED) plus 5+ years of CNC maintenance experience
- Must have solid mechanical background of maintenance experience working with CNC machines, pneumatic, hydraulic, electrical, and programmable logic controls as well as having various electrical mechanical
- Must be able to read schematics and parts drawings, perform routine preventive maintenance on machines and facilities, and be proficient with the use of a multi meter.
- Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals.
- Competence in shop math such as working with fractions and decimals.
- To perform this job successfully, an individual must have basic computer skills, MS Office program, and have ability to enter data in various software systems.
Desired Characteristics
Strong communication skills
Ability to analyze, rebuild, repair NC machinery and other types of equipment's
Excellent customer service to co-workers, customers, and vendors
Works collaboratively and respects all others
Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists.
Fanuc certified
Siemens certified
AS100
Training with Mori Seiki, Makino, Cincinnati Milacron, OKK, SNK and Kuraki Machines
Shift
First
Full-Time/Part-Time
Full-Time
Location
Applied Aerospace & Defense, Santa Ana
Category
Maintenance
Req Number
MAI-26-00002
Position
Maintenance Technician
Close Date
Post Internal Days
0
Number of Openings
1
Exempt/Non-Exempt
Non-Exempt
Hiring Manager(s)
This position is currently accepting applications.
Apply Now
Production Expeditor
About the Organization
Applied Aerospace & Defense (Applied) is a premier provider of advanced design, engineering, and vertically integrated manufacturing solutions for leading and next-generation space and defense technology companies. Applied builds complex hardware for extreme operating environments and is focused on three core markets: Space and Launch Systems, Defense Aviation and Airborne Systems, and C5ISR and Precision Strike Systems. With decades of space and defense manufacturing heritage, Applied combines deep material science and IP-enabled process expertise with the ability to enable rapid prototyping, enhance new product development, and responsively scale production. Across its nationwide infrastructure of advanced manufacturing facilities, Applied continuously supports a balanced mix of next-generation technology and platform development, large scale production programs, and aftermarket sustainment for enduring platforms.
EOE Statement
Applied Aerospace and Defense is an equal opportunity employer.
Description
ACCOUNTABILITY:
This position includes acting as a change agent in developing, introducing, and administering new or assigned suppliers, related to purchasing matters. It also consists of implementing measures to improve company/supplier relations, and ensuring compliance with related contracts or agreements.
This position deals with day-to-day handling of time critical customer product, at times requiring independent action, as well as the ability to follow specific guidelines in administration of contracts or agreements.
TYPICAL DUTIES (May include, but are not limited to the following):
- Establishing contacts and releasing PO's with suppliers, identification and qualification of new sources of suppliers, quoting, supply side monitoring of suppliers: lead-times, capacity, delivery, cost, quality, reverse auction.
- Coordinating with MRO/tooling & product suppliers on the supply needs (requires interaction with division managers.
- Execution and interaction in material supply chain coordination within the division and with external suppliers.
- Identifying and planning integration of MRO materials and supplies into the shop based on knowledge of the kanban replenishment issues.
- Managing the shipping and receiving aspects within the division, calling in outside trucking firms, managing day to day shipping requirements.
- Provide and request information from suppliers, vendors, transportation specialists and other sources, as applicable.
- Review data and information, conduct basic analyses and provide assistance to more experienced staff in more complex matters.
- Review terms and conditions of contracts and agreements to determine compliance with regulations and Company policy.
- Work closely with other groups involved in various aspects of supply chain management and transportation to ensure meeting schedules, and inform senior staff of potential problems.
- Strive for continuous improvement in such matters as cost, quality, and responsiveness to customers.
- Inventory management: determining inventory requirements and maintaining adequate stocks and supplies.
- Developing and implementing state of the art methods and practices to reduce requirements for storage facilities and space and reduce associated costs.
COMPLEXITY OF TASKS:
Under supervision, perform routine duties in support of Purchasing and Logistics. Requires strong working knowledge of computer based programs, and ability to communicate effectively and resolve routine problems. Requires basic understanding of standard supply management and transportation functions and of related policies. Requires interfacing and effective communication with other groups regarding various aspects of the procurement process.
Position Requirements
Experience in Aerospace industry preferred.
Associate Degree or 2 to 5 years of related experience, or a combination of education and experience, and/or demonstrated accomplishments
Shift
Days
Full-Time/Part-Time
Full-Time
Location
Applied Aerospace & Defense, Newington
Category
Manufacturing
Req Number
MAN-26-00007
Position
Production Expeditor
Close Date
Post Internal Days
0
Number of Openings
1
Exempt/Non-Exempt
Exempt
Hiring Manager(s)
This position is currently accepting applications.
Apply Now
NC Programmer
About the Organization
Applied Aerospace & Defense (Applied) is a premier provider of advanced design, engineering, and vertically integrated manufacturing solutions for leading and next-generation space and defense technology companies. Applied builds complex hardware for extreme operating environments and is focused on three core markets: Space and Launch Systems, Defense Aviation and Airborne Systems, and C5ISR and Precision Strike Systems. With decades of space and defense manufacturing heritage, Applied combines deep material science and IP-enabled process expertise with the ability to enable rapid prototyping, enhance new product development, and responsively scale production. Across its nationwide infrastructure of advanced manufacturing facilities, Applied continuously supports a balanced mix of next-generation technology and platform development, large scale production programs, and aftermarket sustainment for enduring platforms.
EOE Statement
Applied Aerospace and Defense is an equal opportunity employer.
Description
Accountability:
Develop, implement, and troubleshoot CNC program designs. Provide technical expertise in collaboration with functions across the organization to achieve project goals. Work closely with production to solve problems. Use strong analytical design and project management skills along with product expertise to meet customer requirements.
Essential Functions and Duties:
- Prepare computer programs to control CNC machine operations using CAD/CAM terminal (Siemens NX and MasterCam).
- Prepare flow charts, documents and sequence logic and write complete sequence of machine operations necessary to complete cycle.
- Analyze engineering drawings for materials, process fabrication and design elements.
- Specify patterns on programming sheet for way part is to be machined.
- Assure program meets target cycle time and program generates geometry to customer requirements.
- Select appropriate cutting tools, speeds and feeds, tool path application necessary to perform the operation.
- Assist in the concept design of required tools and gages, support changes to existing tools and fixture as improvements are identified.
- Support lean activities both within the Engineering group and across the organization.
Complexity of Tasks:
Requires strong verbal and written communication skills along with advanced interpersonal skills. Strong project management skills are essential. Must be able to collaborate with other departments and functions in achieving project goals. Use available resources to support customer needs and expectations on both a national and international level.
Qualifications:
- Bachelor's Degree in an engineering discipline preferred and/or equivalent experience.
- Ten or more years direct experience in multi-axis programming of Aerospace machining operations and materials.
- Ability to program in appropriate programming language using either a CAD/CAM terminal and/or manually generated.
- 3D modeling sketcher, assemblies, lathe, and drafting capability in Siemens PLM (NX 8.5) or later version
- CAD/CAM software: Siemens NX and MasterCam required
- Full multi-axis (5+) or partial (3+1) and general CNC machining/programming experience with lathes, milling machines, and mill/turns. Grinding experience preferred.
- CG Tech Vericut experience required.
- Capable of debugging programs and working closely with shop floor and inspection personnel.
- Some tool design experience preferred.
- Proper application and knowledge of various cutting tools and holders to efficiently complete program operations.
- Must be a team player and have the ability to work closely in a shop environment.
- Seek ideas for continuous improvement; suggest and encourages innovative ideas to improve current systems and processes.
- Working knowledge of Microsoft office application software to include Word, Excel and PowerPoint required
Position Requirements
Shift
Days
Full-Time/Part-Time
Full-Time
Location
Applied Aerospace & Defense, Manchester
Category
Engineering
Req Number
ENG-25-00019
Position
NC Programmer
Close Date
Post Internal Days
0
Number of Openings
3
Exempt/Non-Exempt
Exempt
Hiring Manager(s)
This position is currently accepting applications.
Apply Now
Accounts Payable Specialist
About the Organization
Applied Aerospace & Defense (Applied) is a premier provider of advanced design, engineering, and vertically integrated manufacturing solutions for leading and next-generation space and defense technology companies. Applied builds complex hardware for extreme operating environments and is focused on three core markets: Space and Launch Systems, Defense Aviation and Airborne Systems, and C5ISR and Precision Strike Systems. With decades of space and defense manufacturing heritage, Applied combines deep material science and IP-enabled process expertise with the ability to enable rapid prototyping, enhance new product development, and responsively scale production. Across its nationwide infrastructure of advanced manufacturing facilities, Applied continuously supports a balanced mix of next-generation technology and platform development, large scale production programs, and aftermarket sustainment for enduring platforms.
EOE Statement
Applied Aerospace and Defense is an equal opportunity employer.
Description
Client Organization Scope:
- $150m+ Revenue
- 300+ vendors in AP system
- 80-85% of invoices are PO-related and require 3-way match
- Multi-site responsibility
Accountability:
Owns execution of full-cycle Accounts Payable process. Prepares and processes all accounts payable according to terms, resolving any discrepancies between PO/Receiver/Invoice as needed with limited supervision. Corporate Credit Card reconciliation and follow up on delinquent submissions.
Duties/responsibilities include, but are not limited to the following:
- Must have experience in a Manufacturing environment
- Performs 3-way match of PO, receiver and invoices
- Contacts vendors as needed to request statements and resolve any issues or respond to their inquiries; Assists in resolution of complaints between vendor and customer
- Communicates with buyers on PO discrepancies
- Distributes non-PO invoices for approval
- Processes corporate purchasing credit cards
- Prepares weekly vendor payments by check and ACH; prepares Positive Pay and ACH files for uploading to bank site
- Controls check signatures and distribution to vendors
- Responsible for following up on outstanding "uncashed" checks
- Maintains W-9 documents for all vendors to accurately produce annual 1099s
- Assists with annual financial audits
- Assists accounting staff in the month end close process; ensure that all invoices are posted in the appropriate fiscal month and all invoices that have not yet been received are properly accrued for.
- Maintain accurate and complete records for all accounts payable transactions
- Participates in training and instruction as directed
- Reviews Accounts Payable Aging and Goods Received and Not Invoiced reports for accuracy maintaining GRNI under 90 days of receipt.
The above listed responsibilities are intended to describe the general nature and level of work being performed. They are not intended to be an exhaustive list of all responsibilities or duties required. Incumbents will be expected to perform other duties as assigned.
Position Requirements
Qualifications:
- Associate's Degree in Accounting or comparable work experience; 3+ years'
- Must have experience in a Manufacturing environment
- Minimum of 2 years of full-cycle Accounts Payable experience
- Proficiency in Microsoft Excel, Word and Outlook software applications, knowledge of Epicor a plus
- Working knowledge of chart of accounts for proper general ledger coding.
- Demonstrated time management skills with good attention to detail
- Ability to interact effectively with people at all levels of the organization
- Ability to work independently to identify and resolve exceptions and discrepancies
Shift
Days
Full-Time/Part-Time
Full-Time
Location
Applied Aerospace & Defense, Newington
Category
Accounting/Finance
Req Number
ACC-25-00007
Position
Accounts Payable Specialist
Close Date
Post Internal Days
0
Number of Openings
1
Exempt/Non-Exempt
Exempt
Hiring Manager(s)
This position is currently accepting applications.
Apply Now
Production Manager
About the Organization
Applied Aerospace & Defense (Applied) is a premier provider of advanced design, engineering, and vertically integrated manufacturing solutions for leading and next-generation space and defense technology companies. Applied builds complex hardware for extreme operating environments and is focused on three core markets: Space and Launch Systems, Defense Aviation and Airborne Systems, and C5ISR and Precision Strike Systems. With decades of space and defense manufacturing heritage, Applied combines deep material science and IP-enabled process expertise with the ability to enable rapid prototyping, enhance new product development, and responsively scale production. Across its nationwide infrastructure of advanced manufacturing facilities, Applied continuously supports a balanced mix of next-generation technology and platform development, large scale production programs, and aftermarket sustainment for enduring platforms.
EOE Statement
Applied Aerospace and Defense is an equal opportunity employer.
Description
Role Summary/Purpose
The Production Supervisor at PCX Aerosystems Santa Ana, CA will lead daily operations in one of several departments at the plant to ensure reliability and consistency on the production line. Assignments may include time in the machine shop, assembly, test, overhaul and fuel tank departments. This role will lead a team of hourly production employees to meet orProexceed production, safety, quality goals and delivery goals while maintaining positive employee relations.
Essential Responsibilities
- Oversight and management of front-line hourly manufacturing employees
- Develop operational plans for assigned areas/departments of responsibility including, but not limited to: asset utilization, manufacturing loss improvements, delivery, budgets and effective scheduling of manpower / resources
- Act as a focal point and monitor assigned areas to ensure hardware and subassemblies' delivery dates meet production needs
- Coordinate the efforts of cross-functional groups and across shifts to resolve bottlenecks
- Assure timely shipments to all customers
- Drive process/product improvement programs in areas of responsibility
- Enforce company policies
- Lead cell/group to achieving goals and improvement in quality, delivery and cost reduction
- Ensure communication of key business/customer issues to employees
- Provide total cell/group leadership to continuously improve manufacturing, test, assembly and process for all assigned products/processes/areas as assigned
- Advocate six sigma processes to all aspects of cell/group
- Provide ongoing support in the scheduling of resources, technical leadership and facilitating the production process and flow of hardware to meet customer requirements
- Proactively support and participate in plant wide activities and initiatives
Works with business leadership at all levels
Delivers products as part of a team.
Position Requirements
Qualifications/Requirements
* Bachelor's degree from an accredited university or college (or a high school diploma/GED with at least 5 years of experience in Manufacturing)
* Minimum 3 additional years of supervisory experience in operations/industrial environments
* Legal authorization to work in the U.S. is required. We will not sponsor individuals for employment visas, now or in the future, for this job opening.
Desired Characteristics
* Bachelor's degree in Engineering preferred
* Ability to work non-traditional hours including weekends as needed
* Strong oral and written communication skills.
* Strong interpersonal and leadership skills.
* Ability to influence others and lead small teams.
* Lead and coordinate multiple initiatives of moderate scope and impact simultaneously
* Effective problem solving skills.
* Ability to effectively work across all functions (i.e., HR, finance, sourcing, production, materials, shipping/receiving, sales, contracts, EHS, etc.) within a matrix organization to achieve organizational goals/objectives
* Prior experience leading production teams within a manufacturing environment
* Prior experience in Machining and/or Fabrication/Assembly
* Experience as manufacturing process leader preferred
* Aerospace industry experience preferred
* Six Sigma / Green belt certified preferred
* Familiarity with Lean Manufacturing, working with VSM, Visual Management and DMAIC principals
* Ability to complete manpower planning and analysis including productivity, efficiency and overtime management
LANGUAGE SKILLS
Ability to effectively communicate with peers and supervisors and provide technical feedback as
required. Ability to read and comprehend simple instructions, company communications, and
memos. Ability to write reports and simple correspondence. Ability to effectively present information
in one-on-one and small group situations to customers, clients, and other employees of the
organization.
MATHEMATICAL SKILLS
Ability to apply concepts of basic math techniques.
COMPUTER SKILLS
To perform this job successfully, an individual must be proficient in basic computer skills.
REASONING ABILITY
Ability to define and solve practical problems. Ability to interpret a variety of technical instructions in
mathematical, diagram, written or verbal format. Ability to deal with problems involving several
abstract and concrete variables in standardized situations. Ability to apply common sense
understanding to carry out instructions furnished in written, oral, or diagram form.
PHYSICAL DEMANDS
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
While performing the duties of this job, the employee must be able to stand at least 6 to 8 hours a day. Must be able to work with their hands, arms and be extremely accurate. Must be able to walk, sit, stoop, kneel, crouch, or crawl on a regular basis. Must be able to lift and/or move up to 10 pounds on a frequent basis. Must be able to lift and/or move up to 25 pounds on a regular basis. Specific vision abilities required by this job include close & color vision
WORK ENVIRONMENT
While performing the duties of this job, the employee is regularly exposed to moving high speed machinery and mechanical parts. The employee is occasionally exposed to wet and/or humid conditions. outside weather conditions, machine oils, metal fillings, acetone, paints, solvents, grease, cutting fluids, fumes or airborne particles, toxic or caustic chemicals, and risk of electrical shock or vibration. The noise level in the work environment is usually loud.
Integral Aerospace, Inc dba PCX Aerosystems - Santa Ana is an equal opportunity/affirmative action employer. We consider applicants without regard to race, color, religion, creed, gender, national origin, age, sex, sexual orientation, disability, genetic information, marital or veteran status, or any other category protected by federal, state or local law.
Shift
Various Shifts
Full-Time/Part-Time
Full-Time
Location
Applied Aerospace & Defense, Santa Ana
Category
Manufacturing
Req Number
MAN-25-00008
Position
Production Supervisor
Close Date
Post Internal Days
0
Number of Openings
1
Exempt/Non-Exempt
Exempt
Hiring Manager(s)
Jacqueline Cadena
This position is currently accepting applications.
Apply Now
Sr Manufacturing Engineer - Metals
About the Organization
Applied Aerospace & Defense (Applied) is a premier provider of advanced design, engineering, and vertically integrated manufacturing solutions for leading and next-generation space and defense technology companies. Applied builds complex hardware for extreme operating environments and is focused on three core markets: Space and Launch Systems, Defense Aviation and Airborne Systems, and C5ISR and Precision Strike Systems. With decades of space and defense manufacturing heritage, Applied combines deep material science and IP-enabled process expertise with the ability to enable rapid prototyping, enhance new product development, and responsively scale production. Across its nationwide infrastructure of advanced manufacturing facilities, Applied continuously supports a balanced mix of next-generation technology and platform development, large scale production programs, and aftermarket sustainment for enduring platforms.
EOE Statement
Applied Aerospace and Defense is an equal opportunity employer.
Description
The Sr Manufacturing Engineer is responsible for the technical development, oversight and improvement of manufacturing processes within the area of responsibility. This individual will lead process optimization, technical problem-solving, and cross-functional manufacturing initiatives. This role is accountable for achieving senior-level competence Plans and presents engineering program and product design reviews for compliance with engineering principles, company standards, customer contract requirements, and related specifications. Develops and requests design and specification change releases. Assesses and communicates impact of engineering initiatives to functional groups. The ideal candidate demonstrates advanced technical depth, measurable impact on production performance, and the ability to mentor mid-level and entry-level engineers while partnering with cross-functional stakeholders. This role is classified as Exempt for FLSA purposes and reports to the Engineering Manager.
Pay Range: $110,00.00 to $137,000.00 per year. Final compensation will be based on experience and qualifications.
Essential Responsibilities
- Develop, release, and maintain detailed technical work instructions for the manufacture and repair of aerospace metallic structures and assemblies, ensuring full compliance with customer(s) engineering definition and regulatory requirements.
- Partner with CNC Programming group to develop and implement manufacturing plan for complex metallic machined components/assemblies.
- Provide advanced technical support to Quality and Operations teams to achieve site-level Safety, Cost, Quality, and Delivery (SCQD) objectives; act as a primary escalation point for complex manufacturing issues.
- Partner with Purchasing and Sales during the quoting process to define manufacturing approach, assess technical risk, establish labor standards, and ensure cost competitiveness.
- Establish and validate operational standard hours using time studies and process analysis; drive accuracy in routing and capacity planning assumptions.
- Review engineering drawings, specifications, and model-based definitions to ensure manufacturability; translate design requirements into controlled shop-floor documentation.
- Train and mentor operators and junior engineers on manufacturing methods, process controls, and quality standards; elevate overall technical capability of the team.
- Lead productivity and cost-reduction initiatives through Lean principles, waste elimination, and process optimization; quantify and report measurable performance improvements.
- Develop, validate, and industrialize manufacturing processes for new product introduction (NPI), ensuring processes meet defined capability, repeatability, and quality targets prior to production release.
- Evaluate nonconforming components and determine repair feasibility; develop and validate repair schemes in coordination with Engineering and Quality functions
The individual is required to be a supportive member of Environmental Safety & Health (ESH) and Quality System policies to provide a safe work place and eliminate conditions and behaviors which may cause work related illnesses and/or injuries while delivering quality product and services on time.
Position Requirements
Bachelor of Science in Mechanical Engineering, Manufacturing Engineering, Chemical Engineering, Aerospace Engineering or relevant technical discipline, or HS Diploma/GED w/equivalent composite/aerospace manufacturing/repair experience. 5+ years of technical experience with composites and/or aerospace components production or repair.
Desired Characteristics
- Demonstrated experience creating, structuring, and maintaining complex multi-level Bills of Material (BOMs) for aerospace assemblies, ensuring configuration control and production readiness.
- Proven experience in the developing and implementing machining strategies of large-scale metallic aerospace structures, including fixturing for both Milling and Turning.
- Hands-on experience machining large metallic aerospace components, including process planning, tooling strategy, and dimensional validation.
- Strong proficiency in engineering drawing interpretation, including advanced Geometric Dimensioning and Tolerancing (GD&T) application and tolerance analysis.
- Working knowledge of CAD systems such as CATIA, SolidWorks, NX; ability to interrogate models to support manufacturability and tooling design decisions.
- Experience designing and validating manufacturing tooling for, including production fixtures, machining/holding fixtures and assembly aids.
- Demonstrated change management capability, including leading engineering change implementation across cross-functional teams; ability to manage risk, stakeholder alignment, and execution discipline.
- Strategic thinker capable of translating high-level engineering change initiatives into structured, tactical execution plans; analytical, data-driven, and results-oriented.
- Strong background in continuous improvement methodologies including Six Sigma, Lean Manufacturing, and ACE; proven record of measurable operational improvements.
- Excellent written and verbal communication skills with the ability to influence across organizational levels; demonstrated ability to build engagement and sustain a culture of operational excellence
- Strong familiarity with Microsoft Office products (Word, Excel, PowerPoint, etc.) required.
Shift
First
Full-Time/Part-Time
Full-Time
Location
Applied Aerospace & Defense, Santa Ana
Category
Engineering
Req Number
ENG-26-00001
Position
Sr Manufacturing Engineer - Metals
Close Date
Post Internal Days
0
Number of Openings
1
Exempt/Non-Exempt
Exempt
Hiring Manager(s)
Jacqueline Cadena
This position is currently accepting applications.
Apply Now
VTL Machinist (2nd Shift)
About the Organization
Applied Aerospace & Defense (Applied) is a premier provider of advanced design, engineering, and vertically integrated manufacturing solutions for leading and next-generation space and defense technology companies. Applied builds complex hardware for extreme operating environments and is focused on three core markets: Space and Launch Systems, Defense Aviation and Airborne Systems, and C5ISR and Precision Strike Systems. With decades of space and defense manufacturing heritage, Applied combines deep material science and IP-enabled process expertise with the ability to enable rapid prototyping, enhance new product development, and responsively scale production. Across its nationwide infrastructure of advanced manufacturing facilities, Applied continuously supports a balanced mix of next-generation technology and platform development, large scale production programs, and aftermarket sustainment for enduring platforms.
EOE Statement
Applied Aerospace and Defense is an equal opportunity employer.
Description
Workign knowledge on VTL and Horizontal lathes. Troubleshoot machinery and programming issues to exceed production goals. Adjust offsets daily based on work orders and changing production needs. Monitor and adjust processes or equipment to improve quality and productivity.
- Minimum 5 years of experience in set up of CNC vertical and horizontal Lathes.
- Must have knowledge in the use of precision measuring equipment and thickness gage instruments and their applications.
- A strong understanding in blueprint reading and geometric tolerancing interpretation.
- Intermediate knowledge of cutting tools, boring bars, inserts and tool holding devices associated with their function.
- The ability to follow planning and written instructions is a must.
- Must have excellent verbal and written communication skills.
- Must be able to adapt to changing work environment and have the ability to deal with frequent change and delays and or unexpected events.
- Must be willing to work flexible shifts and changing work schedules.
- Must have sufficient math skills that include the use of adding, subtracting, multiplication geometry, algebra required for fabrication of critical Aerospace components.
- CNC programming skills is a plus.
- Past experience with G & L or other VTL lathes.
- Must have experience with Fanuc controls.
- Must be flexible enough to perform duties as required by Management.
Responsibilities
- Support operators on adjoining shifts with the loading and unloading of parts and fixtures to ensure a smooth transition of work and their instructions.
- Responsible for the setting of tool, offsets, simple edits as instructed by the programmer.
- Responsible for detecting and reporting of equipment malfunctions and possible out of tolerance conditions before they happen.
- Responsible for communication between departments ie, Quality, Production Control, to help resolve any Quality and or Programming concerns.
- Responsible for daily P.M. of machines to make sure machines being operated are in good working order.
- Responsible for maintaining clean and organized work area.
- Required to comply with company policies and procedures as well as all state and federal regulations.
Position Requirements
Shift
Nights
Full-Time/Part-Time
Full-Time
Location
Applied Aerospace & Defense, Newington
Category
Manufacturing
Req Number
MAN-26-00006
Position
VTL Machinist, 2nd Shift
Close Date
Post Internal Days
0
Number of Openings
1
Exempt/Non-Exempt
Non-Exempt
Hiring Manager(s)
This position is currently accepting applications.
Apply Now
Production Planner
About the Organization
Applied Aerospace & Defense (Applied) is a premier provider of advanced design, engineering, and vertically integrated manufacturing solutions for leading and next-generation space and defense technology companies. Applied builds complex hardware for extreme operating environments and is focused on three core markets: Space and Launch Systems, Defense Aviation and Airborne Systems, and C5ISR and Precision Strike Systems. With decades of space and defense manufacturing heritage, Applied combines deep material science and IP-enabled process expertise with the ability to enable rapid prototyping, enhance new product development, and responsively scale production. Across its nationwide infrastructure of advanced manufacturing facilities, Applied continuously supports a balanced mix of next-generation technology and platform development, large scale production programs, and aftermarket sustainment for enduring platforms.
EOE Statement
Applied Aerospace and Defense is an equal opportunity employer.
Description
The Production Planner will be responsible for the planning and scheduling of raw materials, jobs & operations (in house and outside) within an ERP environment and on the shop floor. This role will be responsible for ERP data integrity as well as the flow of the jobs throughout the manufacturing process.
Planner will also be required to achieve high level of customer product delivery (ship to commit) integrity while keeping minimum inventory level of finished goods and WIP.
Key responsibilities - other duties may be assigned:
- Monitor MRP signals (Material buys, job release dates, overdue/exception notices).
- Review MPS/MRP and customer's online portals for demand forecast while maintaining Min/Max levels.
- Review material and outside vendor (OSV) processing requirements.
- Create, release and maintain material requisitions and jobs to meet customer demand.
- Submit and track status of Material and OSV requisitions; confirm PO creation.
- Create and release work orders; maintain work order accuracy (Engineering Changes (ECs), process changes, reprints, etc.).
- Coordinate with production, engineering, sales, purchasing & shipping/receiving to expedite the flow of work orders.
- Monitor and take immediate reschedule action in case of customer demand changes (push-out or pull-ins).
- Audit and maintain ERP system inventory data for accuracy, including cycle count program.
- Work with operations team to analyze work center load/capacity and schedule work accordingly.
- Provide monthly/weekly delivery commitments and ensure 100% commit integrity.
- Monitor finished goods inventory, work in progress and reduce levels to satisfy the company's target metrics.
- Execute inventory transactions from issuance of material to creation of finished goods shippers.
- Achieve high level of customer Percent On Time Delivery (%OTD) performance and minimize overdue/past due orders.
- Participate in continuous improvement and cost saving initiatives.
Position Requirements
Skills and qualifications:
- A proactive team player with a background in production planning/scheduling and inventory control in a capacity-constrained system.
- Prior machine shop planning experience preferred, but not required. Some manufacturing planning experience beyond simple assembly is required.
- Knowledge and experience of MRP/ERP and schedule control in a data-driven environment.
- Proficient in MRP (Epicor preferred but not required)
- Must possess excellent reasoning and communication skills.
- This role requires a high level of energy, creating thinking and problem solving abilities.
- Ability to manage multiple tasks and establish effective work priorities
- Proficient in MS office
Education & Experience:
- Bachelor's degree or high school diploma / GED and at least 3-5 years of experience in a production planning capacity or related aerospace experience
Shift
First
Full-Time/Part-Time
Full-Time
Location
Applied Aerospace & Defense, Enfield
Category
Manufacturing
Req Number
MAN-25-00024
Position
Production Control Planner
Close Date
Post Internal Days
0
Number of Openings
1
Exempt/Non-Exempt
Exempt
Hiring Manager(s)
This position is currently accepting applications.
Apply Now
