Shiftkey Llc Ein Number Jobs in Usa

Title
Aerospace Deburr Specialist (1st Shift)

About the Organization
Applied Aerospace & Defense (Applied) is a premier provider of advanced design, engineering, and vertically integrated manufacturing solutions for leading and next-generation space and defense technology companies. Applied builds complex hardware for extreme operating environments and is focused on three core markets: Space and Launch Systems, Defense Aviation and Airborne Systems, and C5ISR and Precision Strike Systems. With decades of space and defense manufacturing heritage, Applied combines deep material science and IP-enabled process expertise with the ability to enable rapid prototyping, enhance new product development, and responsively scale production. Across its nationwide infrastructure of advanced manufacturing facilities, Applied continuously supports a balanced mix of next-generation technology and platform development, large scale production programs, and aftermarket sustainment for enduring platforms.

EOE Statement
Applied Aerospace and Defense is an equal opportunity employer.

Description

FUNCTION:

In an assigned area or cell, under general supervision perform complex polishing and finishing operations of exacting tolerance on production or overhaul and repair parts. Parts are typically at or near final stages of the manufacturing process, with tight tolerance limits, requiring intense period of concentration for extended periods of time.

TYPICAL DUTIES:

• 
  
• Work from drawings, sketches, computer-generated information and verbal instructions to plan the polishing, finishing or re-work operation to be performed.
  

• 
  
• Must be capable of following standard finishing applications in order to achieve dimensional integrity and required finish characteristics.
  

• 
  
• Must have comprehensive understanding of the material characteristics being worked on in order to determine the appropriate wheel, grit, compound or abrasive texture to use in order to achieve desired finish and dimension.
  

• 
  
• Perform precise chamfering operations on parts, without damaging other critical part dimensions
  

• 
  
• Work from quality review and corrective work documents to repair or rework parts.
  

• 
  
• Use precision measuring instruments in order to gage various critical dimension and tolerance limits, in accordance with established parameters or blue print requirements.
  

• 
  
• Performs temporary part marking and In process transfer marking operations using Vibro Engraving, Electro-chemical Etch, or Ink Stamp, methods with suitable legibility to meet drawing or customer specification requirements
  

• 
  
• Actively participate in various aspects of Lean production and Continuous Improvement projects that drive efficiency improvements.
  

• 
  
• Must work safely at all times. Participate in safety improvement initiatives by raising any safety concerns and helping to come up with corrective actions.
  

• 
  
• Refer difficulties to leader or supervisor as appropriate.
  

• 
  
• May be assigned to carry out tasks, not specifically listed, within the scope and skill level of this job description in support of department or cell objectives and to develop individuals' skills.
  

Position Requirements

Shift
First

Full-Time/Part-Time
Full-Time

Location
Applied Aerospace & Defense, Newington

Category
Manufacturing

Req Number
MAN-26-00001

Position
Finishing Specialist B

Close Date

Post Internal Days
0

Number of Openings
1

Exempt/Non-Exempt
Non-Exempt

Hiring Manager(s)

This position is currently accepting applications.

Apply Now

Title
Final Inspection Apprentice

About the Organization
Applied Aerospace & Defense (Applied) is a premier provider of advanced design, engineering, and vertically integrated manufacturing solutions for leading and next-generation space and defense technology companies. Applied builds complex hardware for extreme operating environments and is focused on three core markets: Space and Launch Systems, Defense Aviation and Airborne Systems, and C5ISR and Precision Strike Systems. With decades of space and defense manufacturing heritage, Applied combines deep material science and IP-enabled process expertise with the ability to enable rapid prototyping, enhance new product development, and responsively scale production. Across its nationwide infrastructure of advanced manufacturing facilities, Applied continuously supports a balanced mix of next-generation technology and platform development, large scale production programs, and aftermarket sustainment for enduring platforms.

EOE Statement
Applied Aerospace and Defense is an equal opportunity employer.

Description

The Final Inspection Apprentice position is primarily responsible for inspecting and recording dimensions of aerospace components per process sheets, Inspection reports, Blueprints and applicable specifications utilizing specified gages and methods to ensure the quality requirements are met prior to presenting the final aerospace component to the customers.

Responsibilities:

• 
  
• Review all raw material and processing certifications IAW Customer and PO requirements.
  
• Utilize Material Release database to document quality review/activities.
  
• Visual and dimensional verification (inspection) to requirements utilizing: micrometers, calipers, bore gages, thread gages, and other inspection equipment as required.
  
• Review and acceptance of Travelers to assure all sign-off complete and revision levels are to Operation Book Requirements.
  
• Presentation of inspected/received parts to various customer representatives and the resolution to any customer questions or concerns.
  
• Initiation of Discrepancy Reports, internal and external for products not meeting drawing requirements.
  
• Perform tasks as assigned by Supervisor and/or Team Leader.
  

Physical Requirements:

• 
  
• Ability to lift 50 lbs.
  
• Ability to stand or sit for extended period of time.
  
• Fine motor skills with frequent hand and arm movement.
  
• Frequent twisting and bending.
  

Unusual Environmental Conditions:

• 
  
• Loud machining environment; exposure to aerospace metals, lubricants, and chemicals.
  

Required Personal Protective Equipment:

• 
  
• Safety glasses/shields, appropriate manufacturing closed toed footwear, hearing protection may be required or other protective equipment as needed.
  

Qualifications - Required

• 
  
• US Citizen
  
• High School Diploma or equivalent
  
• Minimum of 1 Year of Aerospace Inspection Experience
  
• Familiar with ISO / AS9100 requirements and/or Auditing Skills
  
• Basic math or industrial mathematics desired.
  
• Good written and verbal skills
  
• Basic computer skills
  
• Strong attention to detail and accuracy
  
• Strong problem-solving skills required
  
• Strong organizational skills required
  

Position Requirements

Shift
First

Full-Time/Part-Time
Full-Time

Location
Applied Aerospace & Defense, Manchester

Category
Quality Control

Req Number
QUA-25-00034

Position
Final Inspection Apprentice

Close Date

Post Internal Days
0

Number of Openings
1

Exempt/Non-Exempt
Non-Exempt

Hiring Manager(s)

This position is currently accepting applications.

Apply Now

Title
Production Supervisor (2nd Shift)

About the Organization
Applied Aerospace & Defense (Applied) is a premier provider of advanced design, engineering, and vertically integrated manufacturing solutions for leading and next-generation space and defense technology companies. Applied builds complex hardware for extreme operating environments and is focused on three core markets: Space and Launch Systems, Defense Aviation and Airborne Systems, and C5ISR and Precision Strike Systems. With decades of space and defense manufacturing heritage, Applied combines deep material science and IP-enabled process expertise with the ability to enable rapid prototyping, enhance new product development, and responsively scale production. Across its nationwide infrastructure of advanced manufacturing facilities, Applied continuously supports a balanced mix of next-generation technology and platform development, large scale production programs, and aftermarket sustainment for enduring platforms.

EOE Statement
Applied Aerospace and Defense is an equal opportunity employer.

Description

ACCOUNTABILITY:

The position of Cell Leader is a key catalyst on a manufacturing Cell Team, who works in conjunction with Process Engineering, Quality Engineering, and hourly Cell associates to manufacture or assemble a component or major assembly. As such, this individual must supervise a group or groups engaged in various activities in the Operations organization, and act with urgency to direct the resolution of technical and logistics problems and the introduction of measures to improve operations and customer relations.

TYPICAL DUTIES:

• 
  
• Set work priorities aligned to satisfy company, customer demand and on-time delivery metrics. Collaborate with planner and peer Cell Leaders to schedule work through the various manufacturing work centers and manage work center to assure adequate flow of production. Manage line balance ensuring the pacing process is adequately staffed to maintain desired output levels. Hold direct reports accountable to meet Operating, OTD, Quality, and Safety metrics. Ensure direct reports are fully engaged performing value added work.
  
• Develop and implement action plans to meet department goals in the areas of labor efficiency, labor utilization, housekeeping, on-time delivery and productivity improvements. Perform regular daily audits of key processes to ensure optimum process performance and use of latest operation sheets,
  
• Maintain department/cell metrics. Ensure all direct reports understand their cell metrics and how they impact/improve each metric. Monitor Utilization rate in cell is at acceptable level (direct vs. indirect), Labor Efficiency (by person, by job), Quality Performance (Maintain Quality log), enforce work rules (breaks, cell phones, newspapers, etc.), ensure TPM/PM is being completed.
  
• Coach direct reports in maintaining accurate reporting of employee time, vouchering and work performance within the area. Develop and maintain Skills Matrix for accurate identification of workforce capabilities and cross train to support business need.
  
• Encourage employee involvement in and ownership of continuous improvement activities focused on LEAN and waste reduction. Implement and maintain 6S in Cell.
  
• Develop, plan and implement continuous quality improvement through teams within the area of responsibility to attain World Class Quality. Ensure PDR's are written quickly & thoroughly. Initiate PRB review on suspect parts in a timely manner. Support weekly PRB meetings to determine RCCA and develop rework scenarios where possible. Respond to production problems by personally investigating and resolving such problems with hourly and salaried personnel to assure a continuing flow of product. Utilize formal problem solving methodologies to discover and eliminate root cause.
  
• Actively participate, recommend, and initiate improvement in our EH&S practices and procedures.
  
• Reward and recognize associates on a regular basis and support programs that encourage employee involvement and recognition.
  

Position Requirements

QUALIFICATIONS:

• 
  
• 5-10 years' experience working in an aerospace manufacturing environment
  
• Prior experience in a unionized facility is preferred
  
• Proficient in Microsoft Office applications
  
• Excellent process and problem solving skills
  
• Effective communication skills, including verbal (logical and organized), written, listening and presentation
  
• Experience with ERP systems
  
• Team player with strong people skills
  
• Ability to communicate with and influence employees and management at all levels
  
• Decisive and capable of dealing with conflict and resolving issues promptly
  
• Take charge individual with clear sense of urgency
  
• Proven track record of meeting commitments with the highest standards of ethics and integrity
  
• Demonstrated experience in continuous improvement initiatives, root cause corrective action methodology, visual factory management, statistical process control techniques, quality assurance processes, coaching and performance management, safety practices, operations metrics/dashboard measurement.
  

EDUCATION:

• 
  
• Bachelor's degree in Operations Management, Business Management or equivalent work experience will be considered.
  

Shift
-not applicable-

Full-Time/Part-Time
Full-Time

Location
Applied Aerospace & Defense, Newington

Category
Manufacturing

Req Number
MAN-26-00009

Position
Supervisor (Cell Leader)

Close Date

Post Internal Days
0

Number of Openings
1

Exempt/Non-Exempt
Exempt

Hiring Manager(s)

This position is currently accepting applications.

Apply Now

Title
Cost Accountant (Aerospace Industry)

About the Organization
Applied Aerospace & Defense (Applied) is a premier provider of advanced design, engineering, and vertically integrated manufacturing solutions for leading and next-generation space and defense technology companies. Applied builds complex hardware for extreme operating environments and is focused on three core markets: Space and Launch Systems, Defense Aviation and Airborne Systems, and C5ISR and Precision Strike Systems. With decades of space and defense manufacturing heritage, Applied combines deep material science and IP-enabled process expertise with the ability to enable rapid prototyping, enhance new product development, and responsively scale production. Across its nationwide infrastructure of advanced manufacturing facilities, Applied continuously supports a balanced mix of next-generation technology and platform development, large scale production programs, and aftermarket sustainment for enduring platforms.

EOE Statement
Applied Aerospace and Defense is an equal opportunity employer.

Description

Accountability:

The Cost Accountant is responsible for the compilation of cost information for products and services for a specific job or project. Key responsibilities will encompass the investigation of costs that differ from expectations, assisting in resolving those differences and preparing reports. The primary charge of this position will be to bring a higher level of operational effectiveness by streamlining and consolidating processes and systems. They will do this by investigating and analyzing current situations and recommending cost-effective solutions or improvements. In addition, they will analyze and prepare complex financial and business information, in support of various functional groups. Analyze a variety of financial documents, perform technical studies, and forecast trends impacting financial activities. Propose and introduce improvements to enhance customer satisfaction and the group's effectiveness. The location Controller will look to the Cost Accountant to provide accurate information upon which critical decisions will be based. In this role you will interface with all departments at various levels. More specific responsibilities include but will not be limited to the following:

• 
  
• Plan and conduct investigations, audits and analyses of a variety of financial information used in the preparation of budgets, forecasts, business plans, prices, costs of products, services and operations, and prepare reports and recommendations.
  
• Review data and consult with governmental, customer and operating personnel to obtain financial information. Select or devise techniques to ensure optimal analysis of financial elements.
  
• Conduct or coordinate special studies and investigations, and recommend measures to achieve resolution of complex and controversial financial problems. Continually review operations to reduce impact of potential problems and to take advantage of opportunities to achieve cost savings and improve customer satisfaction.
  
• Design, establish, modify, verify and implement cost-effective and responsive programs to meet financial requirements, including a system of checks and balances to safeguard the Company's assets, particularly inventory.
  

Position Requirements

• 
  
• Bachelor's degree in Accounting or related field. Alternatively, a special combination of education and experience and/or demonstrated accomplishments.
  
• Must have 5-8+ years of cost accounting management experience in a manufacturing environment. Aerospace industry preferred.
  
• Requires a thorough knowledge of cost accounting policies and procedures.
  
• The ability to effectively interpret cost accounting operating statistics
  
• Conduct independent investigations and resolve complex cost accounting problems.
  
• High degree of business acumen
  
• Strong communication skills in order to interface effectively with other groups, influence decisions and achieve agreement on complex cost accounting matters
  

Shift
First

Full-Time/Part-Time
Full-Time

Location
Applied Aerospace & Defense, Newington

Category
Accounting/Finance

Req Number
ACC-25-00006

Position
Cost Accountant

Close Date

Post Internal Days
0

Number of Openings
1

Exempt/Non-Exempt
Exempt

Hiring Manager(s)

This position is currently accepting applications.

Apply Now

Title
Program Manager, NPI

About the Organization
Applied Aerospace & Defense (Applied) is a premier provider of advanced design, engineering, and vertically integrated manufacturing solutions for leading and next-generation space and defense technology companies. Applied builds complex hardware for extreme operating environments and is focused on three core markets: Space and Launch Systems, Defense Aviation and Airborne Systems, and C5ISR and Precision Strike Systems. With decades of space and defense manufacturing heritage, Applied combines deep material science and IP-enabled process expertise with the ability to enable rapid prototyping, enhance new product development, and responsively scale production. Across its nationwide infrastructure of advanced manufacturing facilities, Applied continuously supports a balanced mix of next-generation technology and platform development, large scale production programs, and aftermarket sustainment for enduring platforms.

EOE Statement
Applied Aerospace and Defense is an equal opportunity employer.

Description

In the aerospace industry, a Program Manager serves as the central bridge between design engineering and full-scale manufacturing. This role is high impact, requiring a strategic thinker who can navigate complex technical requirements and rigorous regulatory standards to ensure products are optimized for both scalability and efficiency.

Core Responsibilities

• 
  
• Project Lifecycle Leadership: Own the execution of new products from initial design handoff through prototyping, pilot builds, and final transition to production.
  
• Cross-Functional Coordination: Lead integrated teams across engineering, supply chain, quality, and finance to ensure alignment of program goals.
  
• Resource & Budget Management: Work with cross functional groups to develop end-to-end manufacturing plans, including detailed schedules, resource allocation, and budget oversight to maintain project costs within 5-10% of estimates.
  
• Risk & Change Mitigation: Proactively identify delivery risks, manage engineering changes through disciplined configuration control, and develop contingency plans for roadblocks.
  
• Operational Readiness: Ensure manufacturing systems, tooling, and supply chains are ready for high-volume production, including making critical "make/buy" decisions.
  
• Stakeholder Management: Act as the primary point of contact for customers, providing regular status updates on milestones, KPIs, and delivery performance.
  

Required Qualifications

• 
  
• Education: A Bachelor's degree in Engineering (Mechanical, Industrial, or Aerospace), Business Management, or Operations Management is typically required.
  
• Experience: At least 3-7 years of experience in aerospace manufacturing or a similar fast-paced engineering environment.
  
• Certifications: PMP (Project Management Professional) certification is frequently preferred or required to demonstrate formal methodology expertise.
  
• Technical Proficiency: Deep understanding of manufacturing processes (e.g., precision machining, assembly), ERP/MRP systems, and product lifecycle management (PLM) tools.
  
• Regulatory Knowledge: Familiarity with Aerospace Quality & Compliance standards (such as AS9100 or FAA regulations) is often essential.
  

Key Performance Indicators (KPIs)

Aerospace NPI managers are often measured by their ability to:

• 
  
• Consistently meet Contract Ship Dates for complex projects.
  
• Achieve On-Time Delivery (OTD) and milestone completion targets.
  
• Maintain high Quality Standards and production yields during the ramp-up phase.
  

Position Requirements

Shift
First

Full-Time/Part-Time
Full-Time

Location
Applied Aerospace & Defense, Manchester

Category
Program Management

Req Number
PRO-26-00002

Position
Program Manager, NPI

Close Date

Post Internal Days
0

Number of Openings
1

Exempt/Non-Exempt
Exempt

Hiring Manager(s)

This position is currently accepting applications.

Apply Now

Title
Assistant Controller

About the Organization
Applied Aerospace & Defense (Applied) is a premier provider of advanced design, engineering, and vertically integrated manufacturing solutions for leading and next-generation space and defense technology companies. Applied builds complex hardware for extreme operating environments and is focused on three core markets: Space and Launch Systems, Defense Aviation and Airborne Systems, and C5ISR and Precision Strike Systems. With decades of space and defense manufacturing heritage, Applied combines deep material science and IP-enabled process expertise with the ability to enable rapid prototyping, enhance new product development, and responsively scale production. Across its nationwide infrastructure of advanced manufacturing facilities, Applied continuously supports a balanced mix of next-generation technology and platform development, large scale production programs, and aftermarket sustainment for enduring platforms.

EOE Statement
Applied Aerospace and Defense is an equal opportunity employer.

Description

The Assistant Controller plays a critical role in supporting Finance Director in managing accounting operations for two Business Units. This position focuses on inventory control, cost accounting, and audit compliance, ensuring accurate financial reporting and adherence to industry standards. The role requires strong analytical skills, attention to detail, and the ability to work collaboratively across departments.

Pay Range: $105,000.00 to $135,000.00 per year. Final compensation will be based on experience and qualifications.

Essential Duties and Responsibilities

This is not intended as a comprehensive list; it is intended to provide a representative summary of the major duties and responsibilities. Incumbent(s) may not be required to perform all duties listed, and may be required to perform additional, position-specific tasks.

• 
  
• Inventory & Cost Accounting
  
  
  • 
    
  • Oversee inventory accounting processes, including valuation, reconciliation, and reporting.
    
  • Maintain and analyze costs, variances, and manufacturing overhead allocations.
    
  • Partner with operations and supply chain teams to ensure accurate inventory tracking and cost control.
    
  
  
  
• Program Finance & EAC Management
  
  • 
    
  • Collaborate with Program Managers to monitor program financial performance.
    
  • Review Estimate at Completion (EAC) reports, ensuring accuracy and alignment with program budgets.
    
  • Track program costs, revenue recognition, and margin analysis for long-term contracts.
    
  • Provide financial insights to support program decision-making and risk mitigation.
    
  
  
  
• Financial Reporting & Compliance
  
  • 
    
  • Prepare and review monthly, quarterly, and annual financial statements in accordance with GAAP.
    
  • Ensure compliance with internal policies, SOX requirements, and external regulations.
    
  • Support internal and external audits, providing documentation and resolving inquiries.
    
  
  
  
• Accounting Operations
  
  • 
    
  • Manage general ledger activities, including journal entries and account reconciliations.
    
  • Oversee accounts payable, accounts receivable, and payroll functions as needed.
    
  • Assist with month-end and year-end close processes.
    
  
  
  
• Budgeting & Forecasting
  
  • 
    
  • Contribute to annual budgeting and periodic forecasting processes.
    
  • Provide cost analysis and variance reporting to support decision-making.
    
  
  
  
• Process Improvement & Systems
  
  • 
    
  • Identify opportunities to streamline accounting processes and improve efficiency.
    
  • Support ERP system enhancements and automation initiatives.
    
  
  
  
• Team Leadership
  

Supervise and mentor accounting staff, fostering a culture of accuracy and accountability.

Position Requirements

• Strong background in inventory management, cost accounting, and audit support.
• Bachelor's degree from an accredited institution in Finance or Accounting.
• Formal training and in-depth experience in cost accounting, financial accounting, local, state, and federal tax regulations, and financial analysis & reporting.
• Minimum 5 years of accounting experience.

Desired Qualifications

• Manufacturing environment

• Strong analytical and evaluative skills
• Developed written and oral communication skills
• Strong interpersonal skills as this team member will interact frequently with personnel outside of accounting and finance department.
• Strong decision-making skills: incumbent needs to analyze and synthesize data, and be able to make decisions without having complete information
• Expert user of Microsoft Office products

Additional Eligibility Qualifications

The Company will only employ those who are legally authorized to work in the United States for this opening. US Citizenship or Permanent Residence (Green Card) is required. We will not sponsor individuals for employment visas, now or in the future, for this job opening.

Any offer of employment is conditioned upon the successful completion of a background investigation and drug screen. Candidate must also pass a basic visual acuity exam.

Shift
First

Full-Time/Part-Time
Full-Time

Location
Applied Aerospace & Defense, Long Beach

Category
Accounting/Finance

Req Number
ACC-26-00001

Position
Assistant Controller

Close Date

Post Internal Days
0

Number of Openings
1

Exempt/Non-Exempt
Exempt

Hiring Manager(s)
Jacqueline Cadena

This position is currently accepting applications.

Apply Now

Title
LEAN Specialist

About the Organization
Applied Aerospace & Defense (Applied) is a premier provider of advanced design, engineering, and vertically integrated manufacturing solutions for leading and next-generation space and defense technology companies. Applied builds complex hardware for extreme operating environments and is focused on three core markets: Space and Launch Systems, Defense Aviation and Airborne Systems, and C5ISR and Precision Strike Systems. With decades of space and defense manufacturing heritage, Applied combines deep material science and IP-enabled process expertise with the ability to enable rapid prototyping, enhance new product development, and responsively scale production. Across its nationwide infrastructure of advanced manufacturing facilities, Applied continuously supports a balanced mix of next-generation technology and platform development, large scale production programs, and aftermarket sustainment for enduring platforms.

EOE Statement
Applied Aerospace and Defense is an equal opportunity employer.

Description

The Lean Specialist will drive operational excellence by identifying, analyzing, and eliminating waste across business processes. This role involves leading cross-functional teams, implementing Lean methodologies (such as 5S, Kaizen, VSM), and fostering a culture of continuous improvement to enhance productivity, quality, and cost savings.

Key Responsibilities

• 
  
• Process Improvement: Lead, facilitate, and support Lean Six Sigma projects and Kaizen events to streamline operations, reduce defects, and improve flow.
  
• Value Stream Mapping (VSM): Conduct detailed VSM to analyze current state, map future state, and identify inefficiencies (waste).
  
• Training & Coaching: Provide coaching and training to staff on Lean tools, principles, and standard work to embed a continuous improvement mindset.
  
• Data Analysis & Reporting: Utilize data-driven insights and statistical tools to measure KPI improvements, tracking savings and results for senior management.
  
• Standardization: Implement and sustain 5S, Kanban, and Standard Operating Procedures (SOPs) to ensure consistent, efficient performance.
  
• Gemba Walks: Perform regular Gemba walks to identify abnormalities, support employees on the shop floor, and identify improvement opportunities.
  
  

Key Skills & Qualifications

• 
  
• Lean Expertise: Deep understanding of Lean principles, Six Sigma methodologies, Kaizen, and waste reduction techniques (8 Wastes).
  
• Analytical Skills: Strong ability to analyze complex data sets to identify trends, root causes, and solutions, with proficiency in tools like Excel, Minitab, or Visio.
  
• Project Management: Proven ability to manage multiple projects simultaneously from inception to completion.
  
• Leadership & Change Management: Exceptional ability to lead cross-functional teams and drive cultural change within an organization.
  
• Communication: Excellent verbal and written skills to interact with diverse groups, including shop floor staff and executive leadership.
  
• Facilitation: Ability to lead workshops and brainstorming sessions effectively.
  

Education & Experience Requirements

• 
  
• Education: Bachelor's degree in Engineering, Business Administration, Operations Management, or a related field.
  
• Experience: 3-5+ years of experience in Lean manufacturing, operational excellence, or continuous improvement roles.
  
• Certification: Lean Six Sigma Green Belt or Black Belt certification is highly desirable.
  

Position Requirements

Shift
First

Full-Time/Part-Time
Full-Time

Location
Applied Aerospace & Defense, Manchester

Category
Manufacturing

Req Number
MAN-26-00010

Position
LEAN Specialist

Close Date

Post Internal Days
0

Number of Openings
1

Exempt/Non-Exempt
Exempt

Hiring Manager(s)

This position is currently accepting applications.

Apply Now

Title
CNC Machinist - Turning 1st/2nd shift

About the Organization
Applied Aerospace & Defense (Applied) is a premier provider of advanced design, engineering, and vertically integrated manufacturing solutions for leading and next-generation space and defense technology companies. Applied builds complex hardware for extreme operating environments and is focused on three core markets: Space and Launch Systems, Defense Aviation and Airborne Systems, and C5ISR and Precision Strike Systems. With decades of space and defense manufacturing heritage, Applied combines deep material science and IP-enabled process expertise with the ability to enable rapid prototyping, enhance new product development, and responsively scale production. Across its nationwide infrastructure of advanced manufacturing facilities, Applied continuously supports a balanced mix of next-generation technology and platform development, large scale production programs, and aftermarket sustainment for enduring platforms.

EOE Statement
Applied Aerospace and Defense is an equal opportunity employer.

Description

This position builds the operator's skills and knowledge to efficiently perform and maintain the manufacturing processes vertical and horizontal multi-axis turning machines to produce precision aerospace components.

Responsibilities:

• 
  
• Perform set up and operate vertical and horizontal multi-axis turning machinery as required with supervision.
  
• Use manual inspection equipment as required, e.g. height stands, micrometers, indicators, dial bores, verniers, etc.
  
• Work with aerospace materials such as aluminum, stainless steel, magnesium, titanium, and nickel alloys.
  
• Read/interpret operation sheets and work instructions.
  
• Adhere to established policies and company procedures and standard work.
  
• Participate in process improvement initiatives utilizing lean manufacturing tools and techniques.
  
• Document and communicate manufacturing performance issues to maintain continuity between shifts and decrease machine downtime.
  
• Maintain work areas and equipment in a clean and orderly condition.
  
• Follow all safety policies, rules and regulations.
  
• Other duties as assigned by Leads, Supervisors and/or Managers.
  

Physical Requirements:

• 
  
• Ability to stand or sit for extended period of time on a concrete manufacturing floor.
  
• Fine motor skills with frequent hand and arm movement.
  
• Ability to lift up to 50 pounds.
  
• Moderate twisting and bending.
  
• Moderate climbing on step stools or platforms.
  
• Unusual Environmental Conditions:
  
• Loud machining environment; exposure to aerospace metals, lubricants and chemicals.
  
• Required Personal Protective Equipment:
  
• Safety glasses/shields, appropriate manufacturing closed toed footwear, gloves, hearing protection may be required or other protective equipment as needed.
  

Qualifications:

• 
  
• US Citizen
  
• High School Diploma or equivalent.
  
• Technical school graduate in machining or two years of CNC experience.
  
• Aerospace experience preferred.
  
• Basic understanding of math or industrial mathematics.
  
• Good written and verbal skills.
  
• Basic computer skills.
  
• Ability to read technical drawings.
  
• Ability to set, use or setup various measuring devices.
  
• Solid problem solving skills.
  

Position Requirements

Shift
Various Shifts

Full-Time/Part-Time
Full-Time

Location
Applied Aerospace & Defense, Manchester

Category
Operations

Req Number
OPE-25-00003

Position
CNC Machinist - Turning

Close Date

Post Internal Days
0

Number of Openings
2

Exempt/Non-Exempt
Non-Exempt

Hiring Manager(s)
Lisa Czaja

This position is currently accepting applications.

Apply Now

Title
Sr TIG Welder

About the Organization
Applied Aerospace & Defense (Applied) is a premier provider of advanced design, engineering, and vertically integrated manufacturing solutions for leading and next-generation space and defense technology companies. Applied builds complex hardware for extreme operating environments and is focused on three core markets: Space and Launch Systems, Defense Aviation and Airborne Systems, and C5ISR and Precision Strike Systems. With decades of space and defense manufacturing heritage, Applied combines deep material science and IP-enabled process expertise with the ability to enable rapid prototyping, enhance new product development, and responsively scale production. Across its nationwide infrastructure of advanced manufacturing facilities, Applied continuously supports a balanced mix of next-generation technology and platform development, large scale production programs, and aftermarket sustainment for enduring platforms.

EOE Statement
Applied Aerospace and Defense is an equal opportunity employer.

Description

We are seeking a motivated and experienced, Tungsten Inert Gas (TIG) Welder to join our aerospace manufacturing team. This position is ideal for individuals who have experience and are eager to grow within a structured and supportive environment. You will assist in the welding, fabrication, and assembly of propellant space tank systems and sub-assemblies.

Pay Range: $40 to $60 per hour.

Position Requirements

• Weld, assemble, and fabricate various propellant space tank systems and sub-assembly components using GTAW (TIG) welding methods
• Use precision-calibrated tools such as torque wrenches, micrometers, and calipers to ensure quality and accuracy
• Perform work in accordance with detailed procedures, specifications, and test instructions
• Read and interpret technical drawings and manufacturing work instructions
• Utilize various mechanical tools and equipment with minimal supervision
• Operate forklifts, overhead cranes, and other heavy equipment safely
• Perform surface preparation processes such as blending, filing, and abrading of flight hardware
• Maintain a clean and organized workspace, ensuring compliance with safety standards
• Support team members with additional duties as required to ensure efficient operations

Qualifications:

• Minimum 5 years of aerospace welding experience
• High school diploma or GED required
• Technical training or certification in TIG welding
• Understanding of GTAW techniques and material weldability
• Ability to read blueprints or technical drawings
• Willingness to learn and follow precise instructions and procedures
• Strong attention to detail and pride in workmanship
• Ability to work well in a team and communicate effectively
• Comfortable working with hand tools and shop equipment
• Forklift or crane certification is a plus

Work Environment:

• Aerospace clean room and shop environment
• Exposure to high-precision components and tight tolerances
• Regular lifting of up to 50 lbs and standing for extended periods

Shift
Swing

Full-Time/Part-Time
Full-Time

Location
Applied Aerospace & Defense, Long Beach

Category
Machine Shop

Req Number
MAC-25-00014

Position
Sr TIG Welder

Close Date

Post Internal Days
0

Number of Openings
1

Exempt/Non-Exempt
Non-Exempt

Hiring Manager(s)

This position is currently accepting applications.

Apply Now

Title
Final Inspector

About the Organization
Applied Aerospace & Defense (Applied) is a premier provider of advanced design, engineering, and vertically integrated manufacturing solutions for leading and next-generation space and defense technology companies. Applied builds complex hardware for extreme operating environments and is focused on three core markets: Space and Launch Systems, Defense Aviation and Airborne Systems, and C5ISR and Precision Strike Systems. With decades of space and defense manufacturing heritage, Applied combines deep material science and IP-enabled process expertise with the ability to enable rapid prototyping, enhance new product development, and responsively scale production. Across its nationwide infrastructure of advanced manufacturing facilities, Applied continuously supports a balanced mix of next-generation technology and platform development, large scale production programs, and aftermarket sustainment for enduring platforms.

EOE Statement
Applied Aerospace and Defense is an equal opportunity employer.

Description

The Final Inspector position is primarily responsible for inspecting and recording dimensions of aerospace components per process sheets, Inspection reports, Blueprints and applicable specifications utilizing specified gages and methods to ensure the quality requirements are met prior to presenting the final aerospace component to the customers.

Responsibilities:

• 
  
• Review all raw material and processing certifications IAW Customer and PO requirements.
  
• Utilize Material Release database to document quality review/activities.
  
• Visual and dimensional verification (inspection) to requirements utilizing: micrometers, calipers, bore gages, thread gages, and other inspection equipment as required.
  
• Review and acceptance of Travelers to assure all sign-off complete and revision levels are to Operation Book Requirements.
  
• Presentation of inspected/received parts to various customer representatives and the resolution to any customer questions or concerns.
  
• Initiation of Discrepancy Reports, internal and external for products not meeting drawing requirements.
  
• Perform tasks as assigned by Supervisor and/or Team Leader.
  

Position Requirements

Physical Requirements:

• 
  
• Ability to lift 50 lbs.
  
• Ability to stand or sit for extended period of time.
  
• Fine motor skills with frequent hand and arm movement.
  
• Frequent twisting and bending.
  

Unusual Environmental Conditions:

• 
  
• Loud machining environment; exposure to aerospace metals, lubricants, and chemicals.
  

Required Personal Protective Equipment:

• 
  
• Safety glasses/shields, appropriate manufacturing closed toed footwear, hearing protection may be required or other protective equipment as needed.
  

Qualifications - Required

• 
  
• US Citizen
  
• High School Diploma or equivalent
  
• Minimum of 1 Year of Aerospace Inspection Experience
  
• Familiar with ISO / AS9100 requirements and/or Auditing Skills
  
• Basic math or industrial mathematics desired.
  
• Good written and verbal skills
  
• Basic computer skills
  
• Strong attention to detail and accuracy
  
• Strong problem-solving skills required
  
• Strong organizational skills required
  

Shift
Days

Full-Time/Part-Time
-unspecified-

Location
Applied Aerospace & Defense, Manchester

Category
Quality Control

Req Number
QUA-25-00032

Position
Final Inspector

Close Date

Post Internal Days
0

Number of Openings
1

Exempt/Non-Exempt
Non-Exempt

Hiring Manager(s)

This position is currently accepting applications.

Apply Now