Sentence Using Enchanted Jobs in Usa

• 
  
• Design / Engineering
  
  • 
    
  • Generate design documents for SCADA/Automation projects
    
    • 
      
    • Develop design document narratives
      
    • Perform requirements analysis
      
    • Generate Sequence of Operations (SOO) / System Functional Documentation
      
    • Create Subsystem Designs (CAD / Panels / Layouts / Wiring / SCADA Screens / Hardware / Communications)
      
    • Comment Resolution
      
    
    
    
  • Reviews and comments on 3rd party design documents for SCADA/Automation projects in support of large programs/projects
    
    • 
      
    • Review design document narratives
      
    • Perform execution and design scope gap analysis
      
    • Review Sequence of Operations / System Functional Documentation to ensure compliance with project requirements
      
    • Review Subsystem Designs (CAD / Panels / Layouts / Wiring / SCADA Screens / Hardware / Communications) for project compliance
      
    • Assist in reviewing project specifications
      
    • Assist in creation of testing plans and procedures for Integrated Systems Factory Testing
      
    
    
    
  
  
  
• Programming
  
  • 
    
  • Program / configure / troubleshoot Controllers, PLCs, RTUs, and/or HMI systems
    
  
  
  
• Testing / Troubleshooting / Deployment / Commissioning
  
  • 
    
  • Assist senior engineers in creating and updating testing and commissioning procedures
    
  • Preparation of test reports
    
  • Originates test procedures
    
  • Commissioning of deployed systems
    
  • Development of test equipment and simulation devices
    
  • Perform Factory and Field Testing
    
  
  
  
• Maintenance
  
  • 
    
  • Perform troubleshooting on service calls to existing and legacy system operators
    
  • Perform hardware / software upgrades and replacements on existing systems
    
  
  
  

• 
  
• Estimates
  
  • 
    
  • Assists senior engineers in preparation of cost estimates and supporting documentation
    
  • Work with relevant stakeholders to review scope of project
    
  • Conduct any surveys, inspections, tours, etc. of client sites, as required
    
  • Assists senior engineers in evaluation and pricing of change orders from vendors
    
  
  
  
• Personnel Management
  
  • 
    
  • Assigns tasks and coordinates with Technical Staff
    
  • Provides technical direction and on-the-job training to drafters, engineering technicians, and less experienced engineers.
    
  
  
  

• 
  
• Bachelor's degree in electrical engineering and 5-7 years field experience
  
• Associate degree in the electrical field and 10 years field experience
  
• High school diploma and 15 years field experience
  
• 5 years' experience with designing and servicing controls systems for switchgear, substations, metering and SCADA/Fault Data/SER/Integration-Automation equipment installation and testing
  
• Experience in reading electrical and control schematics
  
• Experience in electrical power monitoring systems (EPMS) startup, configuration, and calibration
  
• Experience in testing and troubleshooting control and protection systems
  
• Experience using basic electrical and hand tools
  
• Experience using testing, calibration, or industry-specific tools and software
  
• Experience testing, reading/verifying all voltage and current inputs to relays; verifying all metering (local and SCADA); calibrating all relays; trip testing (local and SCADA); verifying all alarms (local and SCADA); verifying all alarms (local and SCADA); verifying all function switches, etc.
  
• Experience with 3 phase power systems; power system protection & control schemes; test equipment; test equipment software
  
• Must be a US CITIZEN
  

• 
  
• Experience in OT and IT networking technologies and topologies
  
• Experience troubleshooting and diagnosing OT and IT networks and protocols
  
• Experience in CAD/CAE Software (Visio, AutoCAD)
  
• Experience in schedule management software (Project, Primavera P6)
  
• Standard Office Software (Microsoft Word, Excel, Access etc.)
  

• 
  
• Required Certifications
  
  • 
    
  • Certification in one or more PLC / Automation Platform, such as: Niagara N4, Schneider Power Monitoring, Rockwell, Siemens, JCI, Eaton Foreseer, etc.
    
  • Certification in one or more SCADA platforms, such as: Iconics, Ignition, Aveva, etc.
    
  
  
  
• Preferred Licenses / Certifications
  
  • 
    
  • Design Build Institute of America (DBIA)
    
  • Certified SCADA Security Architect (CSSA)
    
  • Certified Automation Professional (CAP)
    
  
  
  

• 
  
• While performing the duties of this job, the employee is regularly exposed to computer screens for an extended period of time; Sitting for extended periods of time; Reach by extending hands or arms in any direction; Have finger dexterity in order to manipulate objects with fingers rather than whole hands or arms, for example, using a keyboard; Listen to and understand information and ideas presented through spoken words and sentences; Communicate information and ideas in speaking so others will understand; Read and understand information and ideas presented in writing; Apply general rules to specific problems to produce answers that make sense; Identify and understand the speech of another person.
  

• 
  
• Initiates design documents for small projects and in support of large programs
  
• Develops design documents narratives
  
• Performs requirements analysis
  
• Develops Sequence of Operations / System Functional Documentation
  
• Create Subsystem Designs (CAD / Panels / Layouts / Wiring / SCADA Screens / Hardware / Communications)
  
• Develops Specifications
  
• Performs QA/QC and technical reviews of designs
  
• Plans and Design Procedures and Equipment for Integrated Systems Factory Testing
  
• Comment Resolution
  

Mechanical-focused controls engineer (BAS/BMS)

• 
  
• Experience on EPMS monitoring
  
• Certifications in Platforms (at least one), familiarity with any others preferred: Ignition, Aveva, Automated Logic, Siemens, Schneider EBO, Niagara N4, Iconics Gen64
  
• Experience with Federal Government controls projects (ICS/EMCS/UMCS) preferred
  
• Familiarity with Cisco network switch programming and design preferred
  

• 
  
• Lead programming / configuration team efforts for complex automation and SCADA applications.
  
• Program / Configure / troubleshoot PLCs, RTUs, and/or HMI systems
  
• Testing / Troubleshooting / Deployment / Commissioning
  
• Author testing / commissioning procedures
  
• Preparation of test reports
  
• Originates test procedures
  
• Commissioning of deployed systems
  
• Development of test equipment and simulation devices
  
• Perform Factory and Field Testing
  

• 
  
• Perform troubleshooting on service calls to existing and legacy system operators
  
• Perform hardware / software upgrades and replacements on existing systems
  

• 
  
• Conducts any surveys, inspections, tours, etc. of client sites, as required
  
• Prepares cost estimates and supporting documents for small projects
  
• Perform hardware / software upgrades and replacements on existing systems
  
• Evaluation and pricing of change orders
  

• 
  
• Assigns technical tasks and coordinates with entry-level engineers
  
• Assigns tasks and coordinates with Technical Staff
  

• 
  
• Experience in reading electrical and control schematics and plans
  
• Experience in control system startup, configuration, and calibration
  
• Experience in testing and troubleshooting control systems
  
• Experience using basic electrical and machinist hand tools
  
• Experience using testing, calibration, or industry-specific tools and software
  
• 3-7 years' experience
  
• Bachelor's degree in engineering or higher
  
• Associate degree (add 3 years)
  
• High school diploma (add 5 years)
  
• Must be a US Citizen
  

• 
  
• Experience in computer networks
  
• Experience in CAD/CAE Software (Visio, AutoCAD)
  
• Experience in schedule management software
  
• Standard Office Software (Microsoft Word, Excel, etc.)
  

• 
  
• Certification in one or more PLC / Automation Platform, such as: Niagara N4, Schneider, Rockwell, Siemens, etc.
  
• Certification in one or more SCADA platform, such as: Iconics, Ignition, etc.
  

• 
  
• Certification in one or more PLC / Automation Platform, such as: Niagara N4, Schneider, Rockwell, Siemens, etc.
  
• Certification in one or more SCADA platform, such as: Iconics, Ignition, etc.
  
• Design Build Institute of America (DBIA)
  
• Engineer in Training (EIT) in relevant in field
  

• 
  
• While performing the duties of this job, the employee is regularly exposed to computer screens for an extended period of time; Sitting for extended periods of time; Reach by extending hands or arms in any direction; Have finger dexterity in order to manipulate objects with fingers rather than whole hands or arms, for example, using a keyboard; Listen to and understand information and ideas presented through spoken words and sentences; Communicate information and ideas in speaking so others will understand; Read and understand information and ideas presented in writing; Apply general rules to specific problems to produce answers that make sense; Identify and understand the speech of another person.
  

• 
  
• Design / Engineering
  
  • 
    
  • Assists Senior Engineers in design documents for SCADA/Automation projects
    
    • 
      
    • Developing design document narratives
      
    • Perform requirements analysis
      
    • Understanding of Sequence of Operations (SOO) / System Functional Documentation
      
    • Create Subsystem Designs (CAD / Panels / Layouts / Wiring / SCADA Screens / Hardware / Communications)
      
    • Comment Resolution
      
    
    
    
  • Reviews and comments on 3rd party design documents for SCADA/Automation projects in support of large programs/projects
    
    • 
      
    • Review design document narratives
      
    • Perform execution and design scope gap analysis
      
    • Review Sequence of Operations / System Functional Documentation to ensure compliance with project requirements
      
    • Review Subsystem Designs (CAD / Panels / Layouts / Wiring / SCADA Screens / Hardware / Communications) for project compliance
      
    • Assist in reviewing project specifications
      
    • Assist in creation of testing plans and procedures for Integrated Systems Factory Testing
      
    
    
    
  
  
  
• Programming
  
  • 
    
  • Program / configure / troubleshoot Controllers, PLCs, RTUs, and/or HMI systems
    
  
  
  
• Testing / Troubleshooting / Deployment / Commissioning
  
  • 
    
  • Assist senior engineers in creating and updating testing and commissioning procedures
    
  • Preparation of test reports
    
  • Originates test procedures
    
  • Commissioning of deployed systems
    
  • Development of test equipment and simulation devices
    
  • Perform Factory and Field Testing
    
  
  
  
• Maintenance
  
  • 
    
  • Perform troubleshooting on service calls to existing and legacy system operators
    
  • Perform hardware / software upgrades and replacements on existing systems
    
  
  
  

• 
  
• Estimates
  
  • 
    
  • Assists senior engineers in preparation of cost estimates and supporting documentation
    
  • Work with relevant stakeholders to review scope of project
    
  • Conduct any surveys, inspections, tours, etc. of client sites, as required
    
  • Assists senior engineers in evaluation and pricing of change orders from vendors
    
  
  
  
• Personnel Management
  
  • 
    
  • Assigns tasks and coordinates with Technical Staff
    
  • Provides technical direction and on-the-job training to drafters, engineering technicians, and less experienced engineers.
    
  
  
  

• 
  
• Bachelor degree in electrical or mechanical engineering and 2-5 years field experience
  
• Associate degree in the electrical or mechanical field (add 3 years field experience)
  
• High school diploma (add 5 years field experience)
  
• 2-5 years' experience with designing and servicing controls systems for switchgear, substations, metering and SCADA/Fault Data/SER/Integration-Automation equipment installation and testing
  
• Experience in reading electrical and control schematics
  
• Experience in electrical power monitoring systems (EPMS) startup, configuration, and calibration
  
• Experience in testing and troubleshooting control and protection systems
  
• Experience using basic electrical and hand tools
  
• Experience using testing, calibration, or industry-specific tools and software
  
• Experience testing, reading/verifying all voltage and current inputs to relays; verifying all metering (local and SCADA); calibrating all relays; trip testing (local and SCADA); verifying all alarms (local and SCADA); verifying all alarms (local and SCADA); verifying all function switches, etc.
  
• Experience with 3 phase power systems; power system protection & control schemes; test equipment; test equipment software
  
• MUST BE A US CITIZEN
  

• 
  
• Experience in OT and IT networking technologies and topologies
  
• Experience troubleshooting and diagnosing OT and IT networks and protocols
  
• Experience in CAD/CAE Software (Visio, AutoCAD)
  
• Experience in schedule management software (Project, Primavera P6)
  
• Standard Office Software (Microsoft Word, Excel, Access etc.)
  

• 
  
• Required Certifications
  
  • 
    
  • Certification in one or more PLC / Automation Platform, such as: Niagara N4, Schneider Power Monitoring, Rockwell, Siemens, JCI, Eaton Foreseer, etc.
    
  • Certification in one or more SCADA platforms, such as: Iconics, Ignition, Aveva, etc.
    
  
  
  
• Preferred Licenses / Certifications
  
  • 
    
  • Design Build Institute of America (DBIA)
    
  • Certified SCADA Security Architect (CSSA)
    
  • Certified Automation Professional (CAP)
    
  
  
  

• 
  
• While performing the duties of this job, the employee is regularly exposed to computer screens for an extended period of time; Sitting for extended periods of time; Reach by extending hands or arms in any direction; Have finger dexterity in order to manipulate objects with fingers rather than whole hands or arms, for example, using a keyboard; Listen to and understand information and ideas presented through spoken words and sentences; Communicate information and ideas in speaking so others will understand; Read and understand information and ideas presented in writing; Apply general rules to specific problems to produce answers that make sense; Identify and understand the speech of another person.
  

• 
  
• Design / Engineering
  
  • 
    
  • Assists Senior Engineers in design documents for SCADA/Automation projects
    
    • 
      
    • Developing design document narratives
      
    • Perform requirements analysis
      
    • Understanding of Sequence of Operations (SOO) / System Functional Documentation
      
    • Create Subsystem Designs (CAD / Panels / Layouts / Wiring / SCADA Screens / Hardware / Communications)
      
    • Comment Resolution
      
    
    
    
  • Reviews and comments on 3rd party design documents for SCADA/Automation projects in support of large programs/projects
    
    • 
      
    • Review design document narratives
      
    • Perform execution and design scope gap analysis
      
    • Review Sequence of Operations / System Functional Documentation to ensure compliance with project requirements
      
    • Review Subsystem Designs (CAD / Panels / Layouts / Wiring / SCADA Screens / Hardware / Communications) for project compliance
      
    • Assist in reviewing project specifications
      
    • Assist in creation of testing plans and procedures for Integrated Systems Factory Testing
      
    
    
    
  
  
  
• Programming
  
  • 
    
  • Program / configure / troubleshoot Controllers, PLCs, RTUs, and/or HMI systems
    
  
  
  
• Testing / Troubleshooting / Deployment / Commissioning
  
  • 
    
  • Assist senior engineers in creating and updating testing and commissioning procedures
    
  • Preparation of test reports
    
  • Originates test procedures
    
  • Commissioning of deployed systems
    
  • Development of test equipment and simulation devices
    
  • Perform Factory and Field TestingMaintenance
    
  
  
  
• Maintenance
  
  • 
    
  • Perform troubleshooting on service calls to existing and legacy system operators
    
  • Perform hardware / software upgrades and replacements on existing systems
    
  
  
  

• 
  
• Estimates
  
  • 
    
  • Assists senior engineers in preparation of cost estimates and supporting documentation
    
  • Work with relevant stakeholders to review scope of project
    
  • Conduct any surveys, inspections, tours, etc. of client sites, as required
    
  • Assists senior engineers in evaluation and pricing of change orders from vendors
    
  
  
  
• Personnel Management
  
  • 
    
  • Assigns tasks and coordinates with Technical Staff
    
  • Provides technical direction and on-the-job training to drafters, engineering technicians, and less experienced engineers.
    
  
  
  

• 
  
• Bachelor's degree in electrical or mechanical engineering and 2-5 years field experience
  
• Associate degree in the electrical or mechanical field (add 3 years field experience)
  
• High school diploma (add 5 years field experience)
  
• 2-5 years' experience with designing and servicing controls systems for chiller plants, complex air distribution equipment, equipment installation, and testing
  
• Experience in reading mechanical and control schematics
  
• Experience in building automation systems (BAS) startup, configuration, and calibration
  
• Experience in testing and troubleshooting control systems
  
• Experience using basic electrical and hand tools
  
• Experience using testing, calibration, or industry-specific tools and software
  
• Experience testing, reading/verifying all voltage and current inputs to relays; verifying all metering (local and SCADA); calibrating all relays; trip testing (local and SCADA); verifying all alarms (local and SCADA); verifying all alarms (local and SCADA); verifying all function switches, etc.
  
• Experience with test equipment and test equipment software
  
• Experience with networking design, configuration, and troubleshooting
  
• Experience with air handlers, chiller plant systems and data center CRAC units
  
• Ability to travel up to 80%
  
• MUST BE A US CITIZEN
  

• 
  
• Experience in OT and IT networking technologies and topologies
  
• Experience troubleshooting and diagnosing OT and IT networks and protocols
  
• Experience in CAD/CAE Software (Visio, AutoCAD)
  
• Experience in schedule management software (Project, Primavera P6)
  
• Standard Office Software (Microsoft Word, Excel, Access etc.)
  

• 
  
• Required Certifications
  
  • 
    
  • Certification in one or more PLC / Automation Platform, such as: Niagara N4, Schneider, Rockwell, Siemens, JCI, ALC, Distech, etc.
    
  • Certification in one or more SCADA platforms, such as: Iconics, Ignition, Aveva, etc.
    
  
  
  
• Preferred Licenses / Certifications
  
  • 
    
  • Design Build Institute of America (DBIA)
    
  • Certified SCADA Security Architect (CSSA)
    
  • Certified Automation Professional (CAP)
    
  
  
  

• 
  
• While performing the duties of this job, the employee is regularly exposed to computer screens for an extended period of time; Sitting for extended periods of time; Reach by extending hands or arms in any direction; Have finger dexterity in order to manipulate objects with fingers rather than whole hands or arms, for example, using a keyboard; Listen to and understand information and ideas presented through spoken words and sentences; Communicate information and ideas in speaking so others will understand; Read and understand information and ideas presented in writing; Apply general rules to specific problems to produce answers that make sense; Identify and understand the speech of another person.
  

• 
  
• Repairs metal surfaces (e.g. doors, drain covers, fences, gates, grates, furniture, tools, parts, electric motorized gates, sheet metal, etc.) for the purpose of ensuring safe and efficient use of items.
  
• Installs various items (e.g. backboards, serving lines, railings, fences, re-wiring trailer lights, etc.) for the purpose of completing projects safely and within established time frames.
  
• Maintains shop, equipment, tools, vehicle, etc. for the purpose of ensuring the availability and functioning of required items and ensuring safety.
  
• Coordinates with administration and other trades for the purpose of completing projects/work orders efficiently.
  
• Requests equipment and supplies for the purpose of maintaining inventory and ensuring availability of required items.
  
• Assists other trades personnel as may be required for the purpose of supporting them in the completion of their work activities.
  
• Responds to emergency situations as needed and/or assigned for the purpose of resolving immediate safety concerns.
  
• Transports various items (e.g. tools, equipment, supplies)
  
• AWS Certification preferred but not required.
  
• MIG welding, flux-cored welding, fabrication, Blueprints
  

• 
  
• At least 3 years of experience in welding fabrication and design.
  
• High school diploma or GED is required.
  
• The position is physically demanding and requires working in a fabrication shop environment with exposure to loud noises and changing temperatures.
  
• The position requires working in a fast - paced, high volume and quality-controlled fabrication shop.
  
• The position requires working in areas that may be under construction.
  
• The incumbent must be able to access work areas that may be accessible only by O.S.H.A approved site construction ladders or stairs that are under construction.
  
• Additionally, the position may require flexible work hours, ability to work evenings and weekends to complete a project on time.
  
• The incumbent may be required at times to work in the presence of customers while maintaining a professional and courteous image.
  
• Must wear an M.C. Dean hard hat and safety glasses at all times while on the job site.
  
• Must wear OSHA approved boot length pants and a shirt that covers the shoulders by seven (7) inches. These are not provided by the company.
  
• Must use special safety devices, tools, equipment and protective clothing (flame retardant).Must wear OSHA approved safety footwear and must adhere to safety practices.
  

• 
  
• The position requires the ability to lift, carry, and move objects weighing up to [50 pounds] on a regular basis. Candidates must demonstrate physical strength and stamina to perform various tasks, including but not limited to, loading, and unloading, operating equipment, and assisting in the transportation of various materials. Proper lifting techniques and safety protocols must be followed to ensure personal and team safety.
  
• Relocates a 12 foot stepladder without assistance.
  
• Works at various heights up to 60 feet and can climb and maintain balance on scaffolds, aerial lifts, catwalks and all types of ladders.
  
• Walks, climbs, lifts, squats, crawls, kneels, pushes, pulls and reaches overhead on a routine and repetitive basis.
  
• Possess good vision (may be corrected vision), the ability to see in color, and the ability to hear and communicate in English.
  
• May use a standard ladder without exceeding the weight limit while carrying tools.
  
• Tell when something is wrong or is likely to go wrong. It does not involve solving the problem, only recognizing there is a problem.
  
• Apply general rules to specific problems to produce answers that make sense.
  
• Combine pieces of information to form general rules or conclusions (including finding a relationship among seemingly unrelated events).
  
• See details at close range (within a few feet of the observer).
  
• Listen to and understand information and ideas presented through spoken words and sentences.
  

• 
  
• Health and Safety is our #1 priority and we live it 3-6-5!
  
• Focus on maintaining sustainability and cleaning the Earth 
  
• Starting pay $26-$32/hr
  
• Comprehensive health benefits coverage after 30 days of full-time employment including 401K with Company match
  
• Own part of the company with our Employee Stock Purchase Plan
  
• Opportunities for growth and development for all the stages of your career
  
• Company paid training and tuition reimbursement
  

RESPONSIBILITIES

Key Responsibilities:

• 
  
• Ensure Health and Safety is the number one priority by complying with all safe work practices, policies, and processes and always acting in a safe manner
  
• Operate commercial trucks and assist field laborers when needed (team atmosphere where everyone helps)
  
• Operate a variety of Class B trucks 
  
• Loading and unloading of trucks
  
• Ensure customer satisfaction at time of service.
  
• Proper placarding of vehicles to meet Company and DOT requirements/regulations
  
• Maintain daily logs, time sheets, and various reports
  
• Follow all local, state (provincial) and federal compliance regulations and rules
  
• Safely operate vehicles in accordance with U.S. DOT, local, state (provincial) and federal requirements
  
• Safely observe all corporate operating guidelines and procedures
  
• Observe all company environmental health and safety operating guidelines
  
• Performs other duties as assigned
  
• By position, ability to be on call for emergency response on rotating basis every other week
  
• By position, site-remediation, equipment decontamination, and the handling of hazardous materials. 
  

QUALIFICATIONS

Required Qualifications:

• 
  
• Valid Class B CDL no restrictions
  
• Hazmat and Tanker endorsement 
  
• Previous manual labor experience
  
• Ability to use various mobile devices
  
• Perform physical functions per job requirements
  
• Successfully complete a background check, drug test, and physical, by position
  
• Per OSHA's Respiratory Protection Standard, 29 CFR 1910.34, employees in positions requiring respirators are required to meet facial hair standards.
  

• 
  
• Commercial driver experience 
  
• Previous Hazmat experience 
  
• Previous manual labor experience
  

Clean Harbors is committed to providing access, equal opportunity and reasonable accommodation for individuals with disabilities in employment, its services, programs, and activities. To request reasonable accommodation, contact or 1-844-922-5547.

Clean Harbors is a Military & Veteran friendly company.

Clean Harbors is committed to complying with applicable pay transparency laws and ensuring fair and equitable compensation. The posted salary range reflects the minimum and maximum target for this role. Final compensation may vary based on factors such as location, experience, skills, and business needs. In addition to the base salary, some roles may be eligible for bonus or incentive compensation and a comprehensive benefits package.

*CH

• Experience: from wellness visits and urgent care to advanced surgery and anesthesia, you'll get to use your skills and keep growing every day.
• Career Growth Opportunities: we love helping our team members reach their goals-whether that means advancing your technical skills, taking on new responsibilities, or exploring a leadership role.
• Team vibes: We're a supportive, down-to-earth group that truly has each other's backs. We work hard, laugh a lot, and make time for team bonding activities like outings, lunches, and celebrating wins together.
• Meaningful work: You'll play a key role in providing top-notch care for our patients and helping clients feel supported and informed.

• Compensation: $30-35 per hour, for each hour worked*
• Bonus package: $2000
• CE allowance: up to $1,000 annually based on tenure
• Health package: Medical, dental, and vision insurance
• Life insurance and disability
• Employee Assistance Program
• 401k options
• Paid time off in accordance with site policy and applicable law
• Personal pet discount
• Uniform allowance

• 2+ years of veterinary experience in a clinical setting
• Current Veterinary Technician License in the state of Washington
• Proficiency in the following skills:
  • Surgical assistance and anesthesia monitoring
  • Dental prophy and x-ray
  • Advanced client education
  • In-house patient care

Our M&E team has earned the FAA’s prestigious Diamond Award for almost 20 consecutive years -- the only major carrier to receive the award for as many years, and the most of any airline. From our parts warehouse to the maintenance hangar, our Ready, SAFE, Go mindset prioritizes safety in all that we do -- for our guests and coworkers. If you share our values to safety and excellence, we want to hear from you.

The Line Aircraft Technician is responsible for repair and maintenance of aircraft for the Maintenance & Engineering (M&E) division of Alaska Airlines (AS). As a member of the M&E division, this individual contributor role performs all functions in the repair and maintenance of aircraft, which includes dismantling, repairing, assembly, and erection of machinery and mechanical devices. This is a union represented position.

• Repair and perform maintenance on aircraft, including dismantling, repairing, assembly, and erection of machinery and mechanical devices.
• Perform all work in a prompt timely manner, adhering to all attendance reliability policies and procedures.
• Exercise the authority of an Airman (any gender) Certificate (Repairman ((any gender)) or Airframe and/or Powerplant) in signing the corrective action in maintenance documents or aircraft maintenance log for airworthiness release or return to service, ensuring such is in accordance with Alaska Airlines policies and procedures.
• Act as cockpit coordinator, when assigned, to ensure safe operation of aircraft systems (e.g., flight controls, electrical, landing gear) from the flight deck.
• Ensure that a clean, safe, and orderly work area is maintained at all times. 

Required

• Strong knowledge of aircraft systems.
• Ability to troubleshoot and problem solve technical issues.
• Ability to consistently lift 70 lbs.
• Must be able to bend, stoop, squat, reach and grasp.
• Knowledge of Federal Aviation Administration (FAA) regulations and company procedures.
• Valid Airframe & Powerplant (A&P) license.
• Must have a valid unexpired driver’s license issued by a US state, a US territory or the District of Columbia.
• Flexible to work varied shifts including nights, weekends, and holidays.
• Ability to communicate in English.
• High school diploma or equivalent.
• Minimum age of 18.
• Must be authorized to work in the U.S.

Preferred

• 4 or more years of aircraft technician experience.
• 2 or more years of college.

Embody our values to own safety, do the right thing, be caring and kind, and deliver performance.

Alaska Airlines, Hawaiian Airlines and Horizon Air pay and benefits can vary by company, location, number of regularly scheduled hours worked, length of employment, and employment status.

• Free stand-by travel privileges on Alaska Airlines, Hawaiian Airlines & Horizon Air
• Comprehensive well-being programs including medical, dental and vision benefits
• Generous 401k match program
• Quarterly and annual bonus plans
• Generous holiday and paid time off 

For more information about Alaska/Hawaiian/Horizon Total Rewards please visit our career site and view benefits.

Important notification for employees working at an airport or maintenance hangar: Employees will be required to obtain a SIDA badge provided by the airport authority and maintain good standing in order to keep their SIDA badge. Review the SIDA Badge Requirements document for a comprehensive overview. If an employee does not qualify for a SIDA badge or has their SIDA badge pulled from them, the employee will be terminated. 

Equal Employment Opportunity Policy Statement  

It is the policy of Alaska Airlines, Hawaiian Airlines and Horizon Air to comply with all applicable federal, state and local laws governing nondiscrimination in employment and to ensure equal opportunity in all terms, conditions, and benefits of employment or potential employment.   

We also prohibit discrimination and harassment against any employee or applicant for employment because of race, color, religion, sex, national origin, age, disability, veteran status, genetic information and other legally protected categories.  

We have established an EEO Compliance Program under Section 503 of the Rehabilitation Act of 1973 (“Section 503”) and the Vietnam Era Veteran’s Readjustment Assistance Act of 1974 (“VEVRAA”).  All applicants and employees are treated without regard to their race, color, religion, sex, national origin, disability or protected veteran status. In addition, we have established an audit and reporting system to allow for effective measurement of its equal employment opportunity activities.   

To implement this policy, we will: 

(1) Recruit, hire, train and promote qualified persons in all job titles, without regard to race, color, religion, sex, national origin, age, disability, veteran status, genetic information and any other legally protected categories; 
(2) Ensure that employment decisions are based only on valid job requirements; and 
(3) Ensure that all personnel actions and employment activities such as compensation, benefits, promotions, layoffs, return from layoff, Alaska Airlines, Hawaiian Airlines and Horizon Air sponsored programs, and tuition assistance will be administered without regard to race, color, religion, sex, national origin, age, disability, veteran status, genetic information and other legally protected categories. 

Employees and applicants for employment will not be subjected to harassment, intimidation, threats, coercion or discrimination because they have engaged or may engage in (1) filing a complaint, (2) opposing any act or practice made unlawful by, or exercising any other right protected by, any Federal, State or local law requiring equal opportunity, including Section 503 and the equal opportunity provisions of VEVRAA, or (3) assisting or participating in any investigation, compliance evaluation, hearing, or any other activity related to the administration of any Federal, State or local law requiring equal opportunity, including Section 503 and the equal opportunity provisions  of VEVRAA. 

Government Contractor & Department of Transportation (DOT) Regulations 
Alaska Airlines, Hawaiian Airlines & Horizon Air are regulated by the Department of Transportation (DOT – regulations, 49 CFR part 40) and all applicants are advised that post-offer and/or pre-employment drug testing will be conducted to determine the presence of marijuana, cocaine, opioids, phencyclidine (PCP) and amphetamines or a metabolite of these drugs prior to any offer or employment or transfer into a safety-sensitive position. Failure to submit to testing or positive indications of drug use will render the applicant ineligible for employment with Alaska Airlines/Hawaiian Airlines/Horizon Air and any employment offer will be withdrawn. 

Ready to Lead the Vibe? (Assistant Salon Leader)

Are you a talented Stylist with a knack for leadership? Do you love being behind the chair but find yourself naturally helping others grow? If you're ready to take your first big step into management without hanging up your shears, the Assistant Salon Leader (ASL) role at Hair Cuttery is calling your name.

As the "Right Hand" to the Salon Leader, you'll be the heartbeat of the shop—keeping the energy high, the guests happy, and the team on track. When the Salon Leader is out, you're the captain of the ship!

Why You'll Love This Role:

• The Best of Both Worlds: You get to keep your creative edge "behind the chair" while gaining serious business and leadership chops.
• Be the Ultimate Hype-Person: You'll help mentor the team, lead by example with the "Guest Journey," and keep the salon's culture positive and productive.
• Master the Business: Learn the "why" behind the "what." You'll dive into performance stats, help with strategic scheduling, and learn how to run a profitable salon.
• The "Smart Start" Expert: You'll play a huge role in welcoming new talent, helping them onboard, and showing them what it means to be part of the Hair Cuttery family.

What Your Day-to-Day Looks Like:

• Lead the Floor: Support daily operations, from managing the appointment book in Zenoti to ensuring every guest leaves feeling like a million bucks.
• Coach & Mentor: Use the IGROW model to help fellow stylists hit their goals and grow their careers.
• Keep it Clean & Compliant: You'll help ensure the salon meets all State Board and OSHA standards—because a safe salon is a successful salon.
• Marketing Pro: Help execute local partnerships and digital campaigns to keep those chairs full and the brand buzzing.

The "Must-Haves" (Requirements):

• The License: You must have a current Cosmetology license for the state where you're applying.
• The Commitment: This is a full-time leadership role (minimum 40 hours per week).
• The Hustle: You'll need the physical stamina to stand for long periods and the dexterity to perform all salon services with precision.
• The Skills: Previous leadership experience is a plus, but a great attitude, basic math skills (for inventory/cash), and stellar communication are non-negotiable.
• The Gear: Bring your personal equipment daily and be ready to rock!

Why Hair Cuttery?

We don't just offer a job; we offer a path. Whether you want to eventually lead your own salon or become a master educator, the ASL role is the perfect launchpad. We also offer benefits, such as medical, dental, and vision, as well as 401 (k), life insurance, PTO/vacation, and more.

Legal Note: Assistant Salon Leaders must be able to perform the Essential Job Functions satisfactorily. Reasonable accommodations may be made to enable individuals with disabilities to perform these functions. As the beauty industry moves fast, this job description may evolve to meet the needs of the business.

Ready to level up your career? Apply now and let's make some hair magic happen together!

Hair Cuttery Family of Brands (HCFB) is the home of Hair Cuttery, Bubbles and CIBU. Stylists are the heart of our business. The Hair Cuttery Family of Brands provides Equal Employment Opportunities (EEO) to all applicants.

Location: Tulsa, OK

Facility: Ascension St. John Medical Center

Department/Speciality: Ortho Neuro

Schedule: Nights, Full time

#NextGenHealthcare

Ascension is a leading nonprofit Catholic health system with a culture and associate experience grounded in service, growth, care and connection. We empower our 99,000+ associates to bring their skills and expertise every day to reimagining healthcare, together. Recognized as one of the Best 150+ Places to Work in Healthcare and a Military-Friendly Gold Employer, you’ll find an inclusive and supportive environment where your contributions truly matter.

• Comprehensive health coverage: medical, dental, vision, prescription coverage and HSA/FSA options
• Financial security & retirement: employer-matched 403(b), planning and hardship resources, disability and life insurance
• Time to recharge: pro-rated paid time off (PTO) and holidays
• Career growth: Ascension-paid tuition (Vocare), reimbursement, ongoing professional development and online learning
• Emotional well-being: Employee Assistance Program, counseling and peer support, spiritual care and stress management resources
• Family support: parental leave, adoption assistance and family benefits
• Other benefits: optional legal and pet insurance, transportation savings and more

Benefit options and eligibility vary by position, scheduled hours and location. Benefits are subject to change at any time. Your recruiter will provide the most up-to-date details during the hiring process.

• Lead Patient Care: Deliver holistic, high-quality nursing care that aligns with the highest clinical standards and organizational protocols.
• Drive Care Planning: Initiate, implement, and continuously monitor personalized patient care plans, ensuring they are effective and adapt to changing needs.
• Coordinate the Team: Serve as the central communication link for all disciplines—from physicians to specialists—to ensure a unified and seamless care journey for every patient.
• Practice Vigilant Monitoring: Accurately observe, record, and promptly communicate changes in patient conditions, acting quickly and decisively on clinical insights.
• Ensure Continuity: Expertly manage and execute physician and nursing orders while proactively coordinating all elements of a patient’s discharge plan to support successful transitions of care.

Licensure / Certification / Registration:

• BLS Provider obtained within 1 Month (30 days) of hire date or job transfer date required. American Heart Association or American Red Cross accepted.
• Registered Nurse credentialed from the Oklahoma Board of Nursing required.

Education:

• Diploma from an accredited school/college of nursing OR professional licensure at time of hire required.

Equal employment opportunity employer

Ascension provides Equal Employment Opportunities (EEO) to all associates and applicants for employment without regard to race, color, religion, sex/gender, sexual orientation, gender identity or expression, pregnancy, childbirth, and related medical conditions, lactation, breastfeeding, national origin, citizenship, age, disability, genetic information, veteran status, marital status, all as defined by applicable law, and any other legally protected status or characteristic in accordance with applicable federal, state and local laws. For further information, view the EEO Know Your Rights (English) poster or EEO Know Your Rights (Spanish) poster.

Fraud prevention notice

Prospective applicants should be vigilant against fraudulent job offers and interview requests. Scammers may use sophisticated tactics to impersonate Ascension employees. To ensure your safety, please remember: Ascension will never ask for payment or to provide banking or financial information as part of the job application or hiring process. Our legitimate email communications will always come from an @ email address; do not trust other domains, and an official offer will only be extended to candidates who have completed a job application through our authorized applicant tracking system.

E-Verify statement

Employer participates in the Electronic Employment Verification Program. Please click here for more information.