Selectonemenu Converter Primefaces Example Jobs in Usa

Date Posted:

Country:

Location:

Position Role Type:

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Security Clearance Type:

Security Clearance Status:

At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world.

We are seeking a professional Power Design Electrical Engineer to assume a key role within the System Power, Analog and Controls Department. 
 
Do you enjoy power converter design? 
Do early-career engineers come to you for technical guidance? 
Do you have a strong desire to work on projects that are critical to the defense of our nation? 
  
If your answers are yes, we are looking for you to join our team!

 
 What You Will Do

• Design, analyze (including thermal considerations), simulate, and test power conversion circuitry potentially utilizing any standard non-isolated power conversion topologies (buck, boost, buck-boost) including modules and discrete designs.  

• Guide Electronic Computer-Aided Design (ECAD) personnel through PWB layout of power circuitry and technical drawing creation. 

• Perform design work within the bounds of a given schedule. 

• Present reviews of technical data to program leadership and technical staff. 

Qualifications You Must Have

• Typically requires a degree in Science, Technology, Engineering or Mathematics (STEM) and a minimum of 2 years of prior 
  relevant experience

• Minimum of 2 years of professional experience in design, analysis, simulation, and/or test experience with linear converters. 

• Experience with any of the following non-isolated converter topologies:  buck, boost, buck-boost.    

• Experience with design, analysis, and test with analog electronic design and analysis, including FET, BJT, and/or Op-amp circuits. 

Qualifications We Prefer

• Lab experience specific to power electronics and/or controls electronics 

• Demonstrated use of software tools for electrical circuit simulation and/or printed circuit board layout   

• Demonstrated ability to document designs and circuit performance verification 

• Understanding of fundamental power conversion concepts, components, and techniques 

• Demonstrated understanding of linear controls and motor drive techniques. 

• Basic understanding of commonly used power converter and/or motor drive control schemes 

• Design, analysis, and/or test experience with any of the following isolated converter topologies:  flyback, half-bridge, full-bridge, and/or push-pull.  Design scope will ideally include stability. 

• Experience with performing circuit card assembly-level power architecture trades, and/or with system-level power architecture trades, including power converter specification development experience. 

• Professional experience guiding Electronic Computer-Aided Design (ECAD) personnel through PWB layout of power circuitry and technical drawing creation (direct experience with such tools is adequate to fulfill this requirement). 

• Familiarity with circuit simulator SIMPLIS, Saber and/or analysis tool Mathcad. 

• Experience with Mentor Graphics DxDesigner, and/or Hyperlynx. 

• Experience with acting as a liaison between program and functional management. 

• Experience with digital power control. 

• Experience with military specifications. 

• Experience with transformer and inductor design considerations. 

• Design experience with Electro-Magnetic Interference (EMI) concerns. 

• Design experience with voltages > 400V and/or power > 10kW. 

• Experience with program management tools such as Earned Value. 

• Experience with proposal development. 

• Ability to design to meet concerns of adjacent disciplines, such as thermal, structural, mechanical, reliability, and quality. 

• Ability to be a self-starter and be able to function in a dynamic environment. 

• Strong interpersonal, leadership, communication, and time management skills. 

What We Offer

Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation.

This positions is onsite in Huntsville, AL and is eligible for relocation assistance.

Huntsville, Alabama, earned the nickname "ROCKET CITY" for its close association with U.S. space research since 1950. RTX has been here since the early years, having launched its Huntsville operations as the Raytheon Company in 1948. Some of the brightest minds in aerospace and defense call it home. Can you see yourself here?

Huntsville Location information: part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms

Job Description:

• $30.00-$35.00 per hour, depending on experience. 
• Sunday - Thursday 3rd shift hours starting around 6:00 pm:  Flexible on starting time 
• Benefits Day 1 of Employment.  Free Uniforms and Safety Boots

• Competitive pay and benefits, including Day 1 Health & Wellness Benefits, Employee Stock Purchase Plan, 401K Employer Matching, Education Assistance, Paid Time Off, and much more
• Growth opportunities performing essential work to support America’s food distribution system
• Safe and inclusive working environment, including culture of rewards, recognition, and respect

• Complete and perform preventative maintenance on minor repairs and standard component inspections/ repairs of fleet diesel equipment (tractors, trailers, refrigeration units) as well as identifying root causes of basic failures/conditions and perform repairs as required.
• Ensure equipment has required licensing and registration prior to being deemed as “roadworthy”.
• Complete thorough documentation for work orders of repairs and preventative maintenance through the online Enterprise Asset Management system.
• Install, replace, and repair onboard computers.
• Inspect brake systems, steering mechanisms, wheel bearings, and other important parts to ensure that they are in proper operating condition which may require replacement of parts.
• Perform routine maintenance such as changing oil, checking batteries and lubricating equipment and machinery requiring the use of hand tools such as screwdrivers, pliers, wrenches, pressure gauges, and precision instruments, as well as power tools such as pneumatic wrenches, welding equipment, and jacks and hoists.
• Performs other related duties as assigned. 

Qualifications:

Company description

Awards and Accolades

Date Posted:

Country:

Location:

Position Role Type:

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Security Clearance Type:

Security Clearance Status:

At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world.

Our Mission is to develop best in industry technologies that align product capabilities to the needs of our customer. We will empower our people to leverage design commonality and innovation, balancing risk and rigor, to achieve predictable and affordable solutions. We are looking for candidates willing to collaborate, innovate, and team with our engineers to generate and utilize today’s cutting-edge technology.

Effector Guidance Electronics is responsible for designing RF and Microwave hardware, including transmitters, receivers, and exciters.  This includes design and test activities that span preliminary design to integration.  Products we develop support radar and datalink applications on a variety of tactical missile programs.  Critical to this role is designing for challenging mechanical constraints and extreme environments.

What You Will Do

• Design and development of transmitters, receivers or exciters

• Design of circuit card assemblies (CCAs) with RF or mixed signals

• Work in a lab to accomplish component characterization as well as module verification and integration

• Test and handle sensitive RF Hardware

• Schematic capture and RF routing

• Partner with interdisciplinary teams - power, digital, mechanical, etc.

Qualifications You Must Have

• Typically requires a Bachelors Degree in Science, Technology, Engineering or Mathematics (STEM) and a minimum of 2 years of prior relevant experience

Minimum of two years of prior relevant experience to include any combination of the following:

• RF design and fabrication

• RF test and troubleshoot

• Simulation of RF products

• Experience with any of the following tools: Mentor DX Designer or equivalent, High Frequency Structure Simulator (HFSS) or equivalent, SystemVue/Genesys or equivalent, Advanced Design System (ADS)

Qualifications We Prefer

- Technical background in some of the following areas:

• Cascade analysis and/or frequency planning

• Filter design and fabrication

• Circuit card assembly design and fabrication

• Testing or designing RF hybrid (chip and wire) technologies

• High speed data converter test/characterization

• High power RF design or test experience

• Scripting experience (MATLAB or Python)

- Working across domains on complex projects

- Ability to prepare documentation with minimal oversight

What We Offer

Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation.

This position is 100% onsite in Hunstville, AL and is eligible for relocation assistance.

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms

Job Title: Power Electronics Control System Engineer

Location: Fargo, ND

Job Type: Full-Time

We are seeking a Power Electronics Control System Engineer to develop and validate electrification control solutions at both component and system levels using a model-based design approach. The ideal candidate will have hands-on experience in control algorithm development, power electronics simulation, and system-level validation including HIL and laboratory testing.

Key Responsibilities:

• Develop electrification control solutions for power electronics and electric drive systems using model-based design methodologies.
• Design, analyze, and implement control algorithms for power converters and electric motor systems.
• Perform system-level modeling and simulation using MATLAB, Simulink, and Simscape.
• Conduct electric drive and vehicle system simulations to support control development and performance evaluation.
• Validate control strategies through simulation, Hardware-in-the-Loop (HIL), laboratory, and field testing.
• Support auto-code generation and embedded implementation on microcontrollers and/or FPGAs.
• Develop and refine system requirements in collaboration with cross-functional stakeholders.
• Participate in system integration, debugging, and performance optimization activities.
• Document control strategies, validation results, and system performance metrics.
• Support continuous improvement initiatives in control system development processes.

Required Qualifications:

• Bachelor’s degree in Electrical Engineering, Mechanical Engineering, Physics, or related field.
• 1+ years of experience in power electronics or control algorithm development (academic research experience considered).
• Proficiency in MATLAB, Simulink, and Simscape.
• Experience in simulating power electronics, electric machines, and/or control systems.
• Strong analytical and problem-solving skills.
• Effective written and verbal communication skills in English.

Preferred Qualifications:

• Master’s degree in Electrical Engineering, Physics Engineering, or Mechanical Engineering with a focus on power electronics and/or control systems.
• Hands-on laboratory or vehicle testing experience with power electronics or electric motors.
• Experience with Hardware-in-the-Loop (HIL) testing.
• Experience with embedded systems, auto-code generation, and microcontroller/FPGA implementation.
• Working knowledge of version control systems and Agile development methodologies.
• Experience with advanced control techniques (observers, model predictive control, filter design, etc.).
• Experience in power electronics hardware or software design.

At American Packaging Corporation (APC), you'll find the packaging career you've been looking for. With competitive salaries, excellent benefits, 401(k) plans and tuition reimbursement programs, we nurture our employees while advancing and promoting diversity and inclusion. As the leading flexible packaging converter in North America for over a century, APC's longstanding success is fueled from the inside out. We're constantly seeking to improve our internal operations and were named a "Best of the Best" in the Best workplaces in the America's awards for 12 years in a row. It's how and why we engage the best and brightest talent to continue propelling our shared success into the future.

LOCATION: Rochester, NY

SUMMARY: The primary focus of the intern will be to assist the technical staff testing physical properties of flexible packaging, both for new development and production.

ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned.

• Work in the Corporate lab gathering data such as bond strength, seal strength, tensile strength, moisture/oxygen barrier, sustainability and other material testing.
• Tasked with project work and analysis of the data they collect.
• Other duties as assigned.

QUALIFICATION REQUIREMENTS:

To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

EDUCATION and/or EXPERIENCE

Pursuing a Bachelor's degree in Packaging Science.

Experience with lab equipment such as tensile tester, heat sealer, etc.

Experience with Microsoft Excel

Ability to gather data competently into a report format

Statistical Experience is optional

LANGUAGE SKILLS

Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the public.

MATHEMATICAL SKILLS

Ability to calculate figures and amounts such as discounts, interest, commissions, proportions, percentages, area, circumference, and volume. Ability to apply concepts of basic algebra and geometry.

REASONING ABILITY

Ability to define problems, collect data, establish facts, and draw valid conclusions. Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables.

PHYSICAL DEMANDS

The physical demands described here are representatives of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to use hands to finger, handle, or feel and talk or hear. The employee frequently is required to sit and reach with hands and arms. The employee is occasionally required to stand; walk; climb or balance; and stoop, kneel, crouch, or crawl. The employee must occasionally lift and/or move up to 10 pounds.

WORK ENVIRONMENT

The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

American Packaging Corporation is committed to equal opportunity for all, without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic. American Packaging Corporation will make reasonable accommodations for known physical or mental limitations of otherwise qualified employees and applicants with disabilities unless the accommodation would impose an undue hardship on the operation of our business. EOE/AA Disability/Veteran.

If you are interested in applying for an employment opportunity and need special assistance or an accommodation to apply for a posted position, please contact our Human Resources department at:

.

At American Packaging Corporation (APC), you'll find the packaging career you've been looking for. With competitive salaries, excellent benefits, 401(k) plans and tuition reimbursement programs, we nurture our employees while advancing and promoting diversity and inclusion. As the leading flexible packaging converter in North America for over a century, APC's longstanding success is fueled from the inside out. We're constantly seeking to improve our internal operations and were named a "Best of the Best" in the Best workplaces in the America's awards for 12 years in a row. It's how and why we engage the best and brightest talent to continue propelling our shared success into the future.

LOCATION: Remote (Dallas, Forth Worth, and northern Texas area)

SUMMARY: The Digital Account Manager will meet the goals of APC and its customers. This role is responsible for executing strategies to expand American Packaging's presence within the assigned territory or market and grow Digitally Printed Packaging revenue through effective sales techniques, strong customer relationships, and consistent communication. The Digital Account Manager will ensure timely and exceptional service solutions and will independently manage and grow Digital accounts.

ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned.

• Build strong product and customer knowledge, offering creative solutions to internal and external customers.
• Active pipeline development, identify key decision-makers and collaborate with business partners to secure opportunities.
• Manage accounts, develop and implement plans to increase market share.
• Develop strategies for NBOs and monitor their status in CRM/commercialization systems.
• Coordinate activities with Customer Service and Graphics.
• Administer pricing policies to maximize profitability and leverage commercialization tools to request or execute quotes.
• Set sales goals, prepare tailored proposals, and follow up with customers.
• Facilitate product development and ensure customer satisfaction.
• Develop sales plans, complete quarterly/monthly reports, and participate in industry events.
• Qualify leads and provide updates to Sales Leadership.
• Maintain CRM data promptly with accuracy and conduct market research for new opportunities.
• Ownership over AR collections where needed and support customer through urgent requests and quality issues to resolution.
• Perform other duties as assigned.

QUALIFICATION REQUIREMENTS:

To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions.

EDUCATION and/or EXPERIENCE

Bachelor's degree (B. S.) from four-year college or university in Business, Sales, or Marketing or relevant field. A person should have above average analytical and organizational skills, be able to prioritize duties, and communicate well. 2+ years proven selling and relationship building experience preferred.

LANGUAGE SKILLS

Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to write reports, business correspondence, and procedure documents. Ability to effectively present information, including financial information, and respond to questions from top management, managers, general users and customers.

MATHEMATICAL SKILLS

Ability to work with mathematical concepts such as probability and statistical inference. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations.

REASONING ABILITY

Ability to define problems, collect data, establish facts, and draw valid conclusions. Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables.

PHYSICAL DEMANDS

The physical demands described here are representatives of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions.

These demands include:

• Remaining in a stationary position for extended periods of time and travel.
• Moving through APC and customer facilities safety.
• Operate office machines such as computers, copiers, fax machines, etc.
• Frequently communicates with co-workers; must be able to exchange accurate information in these situations.

WORK ENVIRONMENT

The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Excel in a fast-paced dynamic environment.

While performing the duties of this job, the employee is occasionally exposed to moving mechanical parts, fumes or airborne particles, toxic or caustic chemicals, risk of electrical shock, and risk of radiation. The noise level in the work environment is usually moderate.

American Packaging Corporation is committed to equal opportunity for all, without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic. American Packaging Corporation will make reasonable accommodations for known physical or mental limitations of otherwise qualified employees and applicants with disabilities unless the accommodation would impose an undue hardship on the operation of our business. EOE/AA Disability/Veteran.

If you are interested in applying for an employment opportunity and need special assistance or an accommodation to apply for a posted position, please contact our Human Resources department at: .

At American Packaging Corporation (APC), you'll find the packaging career you've been looking for. With competitive salaries, excellent benefits, 401(k) plans and tuition reimbursement programs, we nurture our employees while advancing and promoting diversity and inclusion. As the leading flexible packaging converter in North America for over a century, APC's longstanding success is fueled from the inside out. We're constantly seeking to improve our internal operations and were named a "Best of the Best" in the Best workplaces in the America's awards for 12 years in a row. It's how and why we engage the best and brightest talent to continue propelling our shared success into the future.

LOCATION: DeForest, WI

SHIFT: Rotating 1st and 2nd (2 week rotation)

SUMMARY: Assist in daily operations of the Rotogravure press.

ESSENTIAL DUTIES AND RESPONSIBILITIES include the following:

• Participates in training, embrace concepts of and actively practice the STOP Safety Program fundamentals to aid American Packaging Corporation's efforts to achieve a zero-accident rate.
• Retrieves all necessary set up information/specifications/guidelines and follows instructions on the job jacket.
• Completes all machine changeover/set-up processes minimizing machine downtime and meeting or exceeding set-up standard requirements. Develop set up procedure documentation as required.
• Correctly completes daily production sheets, process condition sheets, waste logs, final release forms, ink paperwork and quality inspection logs. Ensure job order information (size, construction, print position, packing instructions, adhesive structures, proper substrates being used) corresponds with the product being manufactured.
• Safely, efficiently and effectively assists with the assigned production machinery equipment monitoring quality, production and waste adhering to all customer specifications.
• Ensures immediate work area and work areas for which Machine Operator has responsibility are free of clutter and debris. Perform all cleaning/sanitation responsibilities, safely using all required cleaning solutions and protective equipment.
• Removes rolls from rewind, hangs rolls on rewind, makes up doctor blades, preps print carriages, brings correct inks and lacquers to the press, configures ink ratios, disposes of ink, solvents and lacquers, maintains ink viscosities and cuts cores.
• Ability to operate the viscosity control system.
• Ensures all required on-line quality data is properly documented.
• Monitors all quality requirements as outlined by company procedure and specification. Completes necessary sheets for quality checks.
• Actively participates in safety programs and completes required safety observations. Understands and follows plant safety rules.
• Attends and participates in all scheduled meetings (Continuous Quality Improvement, safety, special projects, departmental, etc.).
• Able to work all scheduled shifts and required overtime hours.
• Trains new employees as necessary.
• Other duties as assigned.

QUALIFICATION REQUIREMENTS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

EDUCATION and/or EXPERIENCE

High school diploma or equivalent required. Previous manufacturing experience preferred.

LANGUAGE SKILLS

Ability to read and comprehend simple instructions, short correspondence, and memos. Ability to effectively present information in one-on-one and small group situations to customers, clients, and other employees of the organization.

MATHEMATICAL SKILLS

Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent and to draw and interpret bar graphs.

REASONING ABILITY

Ability to apply common sense understanding to carry out detailed but uninvolved written or oral instructions. Ability to deal with problems involving a few concrete variables in standardized situations.

PHYSICAL DEMANDS

The physical demands described here are representatives of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to use hands to finger, handle, or feel and talk or hear. The employee frequently is required to sit and reach with hands and arms. The employee is occasionally required to stand; walk; climb or balance; and stoop, kneel, crouch, or crawl. This position may require manual lifting not to exceed 50 lbs - reference your department-specific JHA (job hazard analysis) for departmental lifting restrictions.

WORK ENVIRONMENT

While performing the duties of this job, the employee is regularly exposed to fumes or airborne particles. The employee is frequently exposed to moving mechanical parts. The employee is occasionally exposed to toxic or caustic chemicals and risk of electrical shock. The noise level in the work environment is usually loud.

American Packaging Corporation is committed to equal opportunity for all, without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic. American Packaging Corporation will make reasonable accommodations for known physical or mental limitations of otherwise qualified employees and applicants with disabilities unless the accommodation would impose an undue hardship on the operation of our business. If you are interested in applying for an employment opportunity and need special assistance or an accommodation to apply for a posted position, please contact our Human Resources department at .

At American Packaging Corporation (APC), you'll find the packaging career you've been looking for. With competitive salaries, excellent benefits, 401(k) plans and tuition reimbursement programs, we nurture our employees while advancing and promoting diversity and inclusion. As the leading flexible packaging converter in North America for over a century, APC's longstanding success is fueled from the inside out. We're constantly seeking to improve our internal operations and were named a "Best of the Best" in the Best workplaces in the America's awards for 12 years in a row. It's how and why we engage the best and brightest talent to continue propelling our shared success into the future.

LOCATION: Rochester, NY

SCHEDULE: 12 hour shifts rotating day/night schedule

SUMMARY: Identifies and segregates defective material within individual slit rolls. Combines leftover good material into finished rolls and palletizes for shipment to the customer.

ESSENTIAL DUTIES AND RESPONSIBILITIES include the following.

• Facilitate on the job training and instruction for team members on the correct use of tools and equipment to ensure proper safety and operating procedures are followed.
• Mounts slit rolls of product onto shaft of machine using lift cart. Removes rolls as well.
• Sets up and makes necessary adjustments to the machine.
• Must be able to identify defects and splice good material together per spec.
• Reads and understands specs of products being run. Must know packaging materials required for palletizing finished product also. Occasionally uses hand tools to prepare packaging materials.
• Completes daily production reports.
• Operates stretch wrap machine to wrap finished pallets.
• Regularly cleans machine and surrounding area.
• Actively participates in safety programs and makes safety observations. Follows plant safety rules.
• Other duties as assigned.

QUALIFICATION REQUIREMENTS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

EDUCATION and/or EXPERIENCE

High school diploma or general education degree (GED). Dr Winder experience a plus.

LANGUAGE SKILLS

Ability to read and comprehend simple instructions, short correspondence, and memos. Ability to write simple correspondence. Ability to effectively present information in one-on-one and small group situations to customers, clients, and other employees of the organization. Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals.

MATHEMATICAL SKILLS

Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common, fractions, and decimals. Ability to compute rate, ratio, and percent and to draw and interpret bar graphs.

REASONING ABILITY

Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations.

PHYSICAL DEMANDS

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to use hands to finger, handle, or feel. The employee is occasionally required to stand; walk; reach with hands and arms; stoop, kneel, crouch, or crawl; and talk or hear. This position may require manual lifting not to exceed 50 lbs - reference your department-specific JHA (job hazard analysis) for departmental lifting restrictions. Specific vision abilities required by this job include close vision, color vision, and ability to adjust focus.

WORK ENVIRONMENT

The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly exposed to moving mechanical parts. The employee is occasionally exposed to vibration. The noise level in the work environment is usually.

moderate

American Packaging Corporation is committed to equal opportunity for all, without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic. American Packaging Corporation will make reasonable accommodations for known physical or mental limitations of otherwise qualified employees and applicants with disabilities unless the accommodation would impose an undue hardship on the operation of our business. EOE/AA Disability/Veteran.

If you are interested in applying for an employment opportunity and need special assistance or an accommodation to apply for a posted position, please contact our Human Resources department at:

.

At American Packaging Corporation (APC), you'll find the packaging career you've been looking for. With competitive salaries, excellent benefits, 401(k) plans and tuition reimbursement programs, we nurture our employees while advancing and promoting diversity and inclusion. As the leading flexible packaging converter in North America for over a century, APC's longstanding success is fueled from the inside out. We're constantly seeking to improve our internal operations and were named a "Best of the Best" in the Best workplaces in the America's awards for 12 years in a row. It's how and why we engage the best and brightest talent to continue propelling our shared success into the future.

LOCATION: Columbus, WI

SUMMARY: Ensuring the safety and regulatory compliance of food contact packaging materials is a critical business requirement. The Corporate Regulatory Compliance Manager is responsible for developing and maintaining programs that establish our packaging materials are in compliance with regulations in North America, Europe, and other countries our packaging materials are sold in. By applying technical, organizational and project managerial skills, guidance will be provided to Packaging R&D, Sales, Quality, and Manufacturing teams on packaging regulatory matters.

ESSENTIAL DUTIES AND RESPONSIBILITIES include the following, as well as other duties as assigned.

• Own, Develop, and Manage internal processes, governance and systems/databases to efficiently maintain regulatory compliance of packaging materials; both supplier regulatory information and communications to customers.
• Facilitate and implement legal advice into our business regarding food contact material compliance.
• Respond to customer surveys and requests for regulatory information.
• Collaborate with external suppliers to ensure newly developed or revised packaging materials meet regulatory requirements of targeted applications.
• Proactively anticipates potential hurdles and works with sales and technical teams to resolve.
• Keep abreast of key regulatory and consumer developments for packaging materials via workgroups, literature reviews and industry news. Determine business implications, communicate with cross functional stakeholders, and put action plans in place to address.
• Represent APC at conferences and participation in professional association activities including industry workgroups focused on packaging and food safety.
• Provide training and guidance on regulatory requirements for packaging specifications.
• Manage verification testing and maintain requirements to ensure our packaging materials are safe for use as intended.
• Lead the process to ensure that new materials entering our facilities have been evaluated for food safety and that they are safe for their intended use.
• Manage the process for other packaging based regulatory information to include USP, Drug Master File, Sustainable Materials, End of Life Packaging Responsibilities such as EPR and PPWR, and other material certifications.

Organizational Relationships:

• Reports directly to the Director of R&D and Technical Solutions who provides overall strategic direction.
• Manages direct report(s) to ensure objectives are met and the team is responsive to customers and other stakeholders.
• Interacts with Customers, Suppliers, Sales, Purchasing, Technical, Quality, and Manufacturing Departments at each Center of Excellence to ensure materials have been assessed for their intended use, and supports the required customer documentation as needed.
• Responsible for all discussions and communications with legal advice and customers.

Competencies/Abilities:

• Ability to organize large amounts of information.
• Ability to communicate effectively and professionally with suppliers and customers.
• Ability to visibly lead and make decisions in a fast paced environment.
• Ability to create and manage processes in an ambiguous environment.
• Ability to create plans and organizational alignment to resolve issues.
• Ability to understand and interpret government regulations
• Strong interpersonal and influencing skills.
• Flexibility to travel up to 10% of time.

QUALIFICATION REQUIREMENTS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

EDUCATION and/or EXPERIENCE

Bachelor's degree (B.S) in Engineering, Quality, Packaging Science / Engineering, Chemical Engineering, Chemistry, Material Science or Food Science. Minimum 3-5 years' experience in regulatory compliance for packaging materials. Minimum 5-10 years' technical experience in food packaging.

LANGUAGE SKILLS

Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public.

MATHEMATICAL SKILLS

Ability to calculate figures and amounts such as discounts, interest, commissions, proportions, percentages, area, circumference, and volume. Ability to apply concepts of basic algebra and geometry.

REASONING ABILITY

Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form.

PHYSICAL DEMANDS

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

While performing the duties of this job, the employee is regularly required to talk or hear. The employee frequently is required to use hands to finger, handle, or feel. The employee is occasionally required to reach with hands and arms. The employee must occasionally lift and/or move up to 10 pounds. Specific vision abilities required by this job include close vision, color vision, depth perception, and ability to adjust focus.

WORK ENVIRONMENT

The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

While performing the duties of this job, the employee is occasionally exposed to moving mechanical parts, fumes or airborne particles, and risk of electrical shock. The noise level in the work environment is usually moderate.

American Packaging Corporation is committed to equal opportunity for all, without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic. American Packaging Corporation will make reasonable accommodations for known physical or mental limitations of otherwise qualified employees and applicants with disabilities unless the accommodation would impose an undue hardship on the operation of our business. EOE/AA Disability/Veteran.

If you are interested in applying for an employment opportunity and need special assistance or an accommodation to apply for a posted position, please contact our Human Resources department at:

.

At American Packaging Corporation (APC), you'll find the packaging career you've been looking for. With competitive salaries, excellent benefits, 401(k) plans and tuition reimbursement programs, we nurture our employees while advancing and promoting diversity and inclusion. As the leading flexible packaging converter in North America for over a century, APC's longstanding success is fueled from the inside out. We're constantly seeking to improve our internal operations and were named a "Best of the Best" in the Best workplaces in the America's awards for 12 years in a row. It's how and why we engage the best and brightest talent to continue propelling our shared success into the future.

LOCATION: Chili, NY

Hours: 7PM -7AM

SUMMARY: Use experience and skills to troubleshoot, repair, adjust and maintain manufacturing and ancillary equipment.

ESSENTIAL DUTIES AND RESPONSIBILITIES include the following:

• Troubleshoot, repair, adjust and maintain manufacturing and ancillary equipment.
• Troubleshoot, repair, adjust and maintain hydraulic, pneumatic, mechanical, electrical and electronic systems.
• Possess an ability to use monitoring and testing equipment to facilitate in the troubleshooting, repairing, adjusting, and maintaining of manufacturing and ancillary equipment.
• It is the responsibility of the maintenance individual to further his abilities, skills knowledge to expand his capabilities in troubleshooting, repairing, adjusting and maintaining existing as well as new equipment and technology.
• Responsible for working safely, follow LO/TO and electrical safety policies.
• Other duties as assigned.

QUALIFICATION REQUIREMENTS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

EDUCATION and/or EXPERIENCE

Two-year certificate from college or technical school with a focus in machining and/or electronics; or two years related experience and/or training; or equivalent combination of education and experience.

LANGUAGE SKILLS

Ability to read and comprehend simple instructions, short correspondence, and memos. Ability to write simple correspondence. Ability to effectively present information in one-on-one and small group situations to customers, clients, and other employees of the organization.

MATHEMATICAL SKILLS

Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent and to draw and interpret bar graphs.

REASONING ABILITY

Ability to apply common sense understanding to carry out detailed but uninvolved written or oral instructions. Ability to deal with problems involving a few concrete variables in standardized situations.

PHYSICAL DEMANDS

While performing the duties of this job, the employee is regularly required to use hands to finger, handle, or feel. The employee frequently is required to stand; walk; reach with hands and arms; stoop, kneel, crouch, or crawl; and talk or hear. The employee is occasionally required to sit, climb or balance, and taste or smell. The employee must occasionally lift and/or move more than 100 pounds.

WORK ENVIRONMENT

While performing the duties of this job, the employee is occasionally exposed to wet and/or humid conditions; moving mechanical parts; high, precarious places; fumes or airborne particles; toxic or caustic chemicals; outside weather conditions; extreme cold; extreme heat; risk of electrical shock; risk of radiation; and vibration. The noise level in the work environment is usually moderate.

American Packaging Corporation is committed to equal opportunity for all, without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic. American Packaging Corporation will make reasonable accommodations for known physical or mental limitations of otherwise qualified employees and applicants with disabilities unless the accommodation would impose an undue hardship on the operation of our business. EOE/AA Disability/Veteran.

If you are interested in applying for an employment opportunity and need special assistance or an accommodation to apply for a posted position, please contact our Human Resources department at:

.

At American Packaging Corporation (APC), you'll find the packaging career you've been looking for. With competitive salaries, excellent benefits, 401(k) plans and tuition reimbursement programs, we nurture our employees while advancing and promoting diversity and inclusion. As the leading flexible packaging converter in North America for over a century, APC's longstanding success is fueled from the inside out. We're constantly seeking to improve our internal operations and were named a "Best of the Best" in the Best workplaces in the America's awards for 12 years in a row. It's how and why we engage the best and brightest talent to continue propelling our shared success into the future.

LOCATION: Chili, NY

HOURS: Nights11pm- 7am

SUMMARY: Assist in the operation of the Laminator in the safest, most effective, and efficient manner while adhering to established quality standards.

ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned.

• Participate in training, embrace concepts of and actively practice the SPOT Safety Program fundamentals to aid American Packaging Corporation's efforts to achieve a zero-accident rate.
• Locate material for the present job and upcoming jobs so that the machine may operate efficiently.
• Sign onto and use recipe program to load process conditions onto the machine and enter all of the necessary process data.
• Properly flag rejects in master rolls accurately for next operation.
• Monitor pumping systems as outlined to maintain proper mix ratio.
• Understand and utilize all appropriate SOP's.
• Aid in mounting impression/transfer sleeves during changeovers.
• Read, understand, interpret and utilize all information received from both the job jackets, Product Specs and Material picking program.
• Perform and manage all necessary cleaning and housekeeping duties including cleaning the laminator, scrubbing all rollers and pumps, changing filters, picking up debris around the machine, end of order clean-up, and in-process machine laminator cleaning.
• Assist in machine set-up's/changeovers by utilizing the information on the job jacket and any necessary equipment. This includes preparing anilox rolls and sleeves for the laminator, changing anilox rolls, etc.
• Complete necessary quality checks at machine and complete check off paperwork.
• Attend and participate in all scheduled meetings (Continuous Quality Improvement, safety, special projects, departmental, etc.).
• Comply with all company policies and procedures.

QUALIFICATION REQUIREMENTS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

EDUCATION and/or EXPERIENCE:

• High school diploma or GED
• Previous experience in APC manufacturing positions or specific industry related printing/laminating/bag making experience.
• Acceptable prior work history

LANGUAGE SKILLS

Ability to read and interpret documents such as safety rules, operating and maintenance instructions and procedure manuals. Ability to write routine reports and correspondence. Ability to speak effectively before groups of customers or employees of the organization.

MATHEMATICAL SKILLS

Ability to add, subtract, multiply and divide in all units of measure, using whole numbers, common fractions and decimals. Ability to compute percentages and interpret bar graphs.

REASONING ABILITY

Ability to solve practical problems and deal with a variety of variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram or schedule form.

OTHER SKILLS & ABILITIES

Candidate must possess/exhibit the following skills/abilities:

• Accuracy in recording
• Autocount
• Communication Skills: technical information, internal/external customers, all levels of employees
• Conflict Resolution
• Attention to detail.
• Ability to operate powered industrial trucks.
• Independence
• Mechanical aptitude
• Organizational skills
• Safety
• Shift work
• Teamwork

PHYSICAL DEMANDS

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

While performing the duties of this job, the employee is occasionally required to stand, walk, sit, reach with hands and arms, stoop, kneel, crouch or crawl, climb and balance. The employee is frequently required to use hands to finger, handle or feel objects, tools or controls. The employee is regularly required to talk or hear and taste or smell.

This position may require manual lifting not to exceed 50 lbs - reference your department-specific JHA (job hazard analysis) for departmental lifting restrictions. Specific vision abilities required by this job include close vision, color vision, peripheral vision, depth perception, distance and the ability to adjust focus.

WORK ENVIRONMENT

The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

While performing the duties of this job, the employee works near moving mechanical parts and is exposed to fumes or airborne particles (works in an environment where solvent based inks are used). The employee frequently works in high, precarious places, in humid conditions (summer humidity, plant is not air conditioned), and is exposed to electrical shock (only authorized maintenance personnel are allowed access to electrical cabinets).

The noise level in the work environment is usually loud. Hearing protection is mandated.

American Packaging Corporation is committed to equal opportunity for all, without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic. American Packaging Corporation will make reasonable accommodations for known physical or mental limitations of otherwise qualified employees and applicants with disabilities unless the accommodation would impose an undue hardship on the operation of our business. EOE/AA Disability/Veteran.

If you are interested in applying for an employment opportunity and need special assistance or an accommodation to apply for a posted position, please contact our Human Resources department at:

.

At American Packaging Corporation (APC), you'll find the packaging career you've been looking for. With competitive salaries, excellent benefits, 401(k) plans and tuition reimbursement programs, we nurture our employees while advancing and promoting diversity and inclusion. As the leading flexible packaging converter in North America for over a century, APC's longstanding success is fueled from the inside out. We're constantly seeking to improve our internal operations and were named a "Best of the Best" in the Best workplaces in the America's awards for 12 years in a row. It's how and why we engage the best and brightest talent to continue propelling our shared success into the future.

LOCATION: Story City, IA

SUMMARY: We are seeking a motivated Product Development Engineering Intern to support our engineering teams in developing and optimizing flexible packaging solutions. This role provides hands-on experience with material selection, packaging design, testing, and process improvement in a manufacturing environment.

ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned.

* Participate in training, embrace concepts of and actively practice the STOP Safety Program fundamentals to aid American Packaging Corporation's efforts to achieve a zero accident rate.

* Familiarity with the principles and requirements of ISO 9000, ISO 14001, AIB, and SQF.

* Qualify new and alternate materials.

* Monitor Quality Assurance system to ensure that current procedures/testing correlate with customer requirements.

* Update system/procedures as required and develop appropriate procedures to complete assigned projects.

* Manage in-plant trials through conducting pre-trial planning meetings, directing on-line manufacture of trial materials, documenting results of trials and ensuring trial results are met.

* Attend and participate in all company mandated meetings.

* Other duties as assigned.

QUALIFICATION REQUIREMENTS:

To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

EDUCATION and/or EXPERIENCE

Pursuing a Bachelor's degree in Packaging Science.

Experience with lab equipment such as tensile tester, heat sealer, etc.

Experience with Microsoft Excel

Ability to gather data competently into a report format

Statistical Experience is optional

LANGUAGE SKILLS

Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the public.

MATHEMATICAL SKILLS

Ability to calculate figures and amounts such as discounts, interest, commissions, proportions, percentages, area, circumference, and volume. Ability to apply concepts of basic algebra and geometry.

REASONING ABILITY

Ability to define problems, collect data, establish facts, and draw valid conclusions. Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables.

PHYSICAL DEMANDS

The physical demands described here are representatives of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to use hands to finger, handle, or feel and talk or hear. The employee frequently is required to sit and reach with hands and arms. The employee is occasionally required to stand; walk; climb or balance; and stoop, kneel, crouch, or crawl. The employee must occasionally lift and/or move up to 10 pounds.

WORK ENVIRONMENT

The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

American Packaging Corporation is committed to equal opportunity for all, without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic. American Packaging Corporation will make reasonable accommodations for known physical or mental limitations of otherwise qualified employees and applicants with disabilities unless the accommodation would impose an undue hardship on the operation of our business. EOE/AA Disability/Veteran.

If you are interested in applying for an employment opportunity and need special assistance or an accommodation to apply for a posted position, please contact our Human Resources department at:

.

For over a century, American Packaging Corporation (APC) has been a leading flexible packaging converter for customers throughout North America. We nurture our employees by providing competitive salaries, excellent benefits, 401(k) plans and tuition reimbursement programs. These are just a few reasons why we were named a "Best of the Best" in the Best Workplaces in the Americas awards for 12 years in a row. APC's longstanding success is fueled from the inside out, and we consistently seek to improve our internal operations to propel that success into the future.

Prepress Operator

SHIFT: 1st/2nd Rotating

SUMMARY: To prepare and stage press or laminator jobs. Prepress personnel are used in any capacity needed to stage items at any machine. They may retrieve and prepare cylinders for press run and after the press run, clean the cylinders and store them. All of these functions must be performed in the safest, most effective and efficient manner while adhering to established SOP's and quality standards.

ESSENTIAL DUTIES AND RESPONSIBILITIES include the following:

• Facilitate on the job training and instruction for team members on the correct use of tools and equipment to ensure proper safety and operating procedures are followed.
• Actively participate and embrace in the STOP Safety Program fundamentals and adhere to all safety guidelines and rules to aid APC's efforts to achieve a zero-accident rate.
• Participate as a Subject Matter Expert in developing, understanding, and following Standard Operating Procedures and or training documentation.
• Print and understand each job's Job Jacket, Print Specification, and Manufacturing Specification and take to the press.
• Retrieve daily production schedule that identifies which job will run, quantities, priorities, etc. Interpret and act upon information.
• Detect, report, and resolve all missing or substandard machine parts.
• Use an automated storage system terminal to retrieve and return cylinders and anilox to storage.
• Coordinate with Mounting Dept with respect to the production schedule and the staging of jobs. *Applies to Story City, IA COE
• Assemble and transport print cylinders and aniloxes between printing press and prepress departments.
• Place cylinders on assembly table and install the gears and journals. Install the pans, applicator pipes, end shields, splash guards and cylinders into the carriage units. *Applies to Roto COE.
• Return the units to prepress, remove the parts, clean up the cylinders, and store them back into the storage system after a job has run. *Applies to Roto COE.
• Aid on press set-ups as needed. Assist miscellaneous housekeeping and cleaning responsibilities.
• Operate daily a core cutter to produce accurate size cores for each scheduled print job.
• Complete required reports and paperwork. Use a computer terminal.
• Perform required cleaning tasks - some daily, weekly or monthly requirements.
• Obtain Power Industrial Truck license(s).
• Effectively communicate with coworkers throughout all shifts.
• Attend and participate in all company mandated meetings.
• Business travel may be required.
• Any other duties as assigned.

QUALIFICATION REQUIREMENTS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

EDUCATION and/or EXPERIENCE: High school diploma or general education degree (GED); and one to three months related experience and/or training; or equivalent combination of education and experience.

LANGUAGE SKILLS: Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. Ability to speak effectively before groups of customers or employees of organization.

MATHEMATICAL SKILLS: Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent and to draw and interpret bar graphs.

REASONING ABILITY: Ability to apply common sense understanding to carry out detailed but uninvolved written or oral instructions. Ability to deal with problems involving a few concrete variables in standardized situations.

PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

While performing the duties of this job, the employee is regularly required to stand; use hands to finger, handle, or feel; and talk or hear. The employee frequently is required to reach with hands and arm. The employee is occasionally required to walk. This position may require manual lifting not to exceed 50 lbs - reference your department-specific JHA (job hazard analysis) for departmental lifting restrictions. Specific vision abilities required by this job include close vision.

WORK ENVIRONMENT: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

While performing the duties of this job, the employee is occasionally exposed to moving mechanical parts, fumes or airborne particles, and toxic or caustic chemicals. The noise level in the work environment is usually moderate.

American Packaging Corporation is committed to equal opportunity for all, without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic. American Packaging Corporation will make reasonable accommodations for known physical or mental limitations of otherwise qualified employees and applicants with disabilities unless the accommodation would impose an undue hardship on the operation of our business. EOE/AA Disability/Veteran.

If you are interested in applying for an employment opportunity and need special assistance or an accommodation to apply for a posted position, please contact our Human Resources department at:

.

At American Packaging Corporation (APC), you'll find the packaging career you've been looking for. With competitive salaries, excellent benefits, 401(k) plans and tuition reimbursement programs, we nurture our employees while advancing and promoting diversity and inclusion. As the leading flexible packaging converter in North America for over a century, APC's longstanding success is fueled from the inside out. We're constantly seeking to improve our internal operations and were named a "Best of the Best" in the Best workplaces in the America's awards for 12 years in a row. It's how and why we engage the best and brightest talent to continue propelling our shared success into the future.

LOCATION: Columbus, WI

SUMMARY: Directs and coordinates customer service activities for the Assigned COE.

ESSENTIAL DUTIES AND RESPONSIBILITIES include the following:

• Manager Customer Service function.
• Accomplishes objectives by recruiting, selecting, orienting, training, assigning, scheduling, coaching, counseling and disciplining employees
• Communicating job expectations
• Planning, monitoring and reviewing job contributions
• Enforcing policies and procedures
• Manage customer service issues, including terms of sale.
• Monitors inventory so aged material can be shipped or pre-billed
• Provides input for Customer Service Representative performance reviews.
• Manages Expedited freight
• Solve problems, analyze situations/behaviors and prioritize responsibilities.
• Handle complex and escalated customer service issues and follows through to resolution.
• Improving customer service experience, created engaged customers and facilitate organic growth.
• Corresponds with company sales force as needed to address customer issues.
• Provides training for the Customer Service Representative Positions and updates training documents as appropriate.
• Contacts other departments and locations within the organization to obtain and provide information.
• Prepares reports as per customer needs and requests.
• Monitor accuracy of reporting and data base information
• Establish efficient and balanced workflows that maximize efficiency and produce high levels of service quality and customer satisfaction.
• Identify and implement systems/processes improvements that provide best business practices as it relates to customer order entry, order pricing and inventory reporting.
• Improves customer service quality by studying, evaluating, and re-designing processes, establishing and communicating service metrics, monitoring and analyzing results, implementing change as a result.
• Any other assigned responsibilities.

QUALIFICATION REQUIREMENTS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

EDUCATION and/or EXPERIENCE

Ideal candidates will possess a Bachelor's degree (B. A.) from a four-year college or university or equivalent experience. Three to five years related experience in the flexible packaging industry which include: Inside Sales/Sales Service/Customer Service experience, Marketing experience, Pricing background, and Sound technical knowledge/ability.

LANGUAGE SKILLS

Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public.

MATHEMATICAL SKILLS

Ability to work with mathematical concepts such as probability and statistical inference, and fractions, percentages, ratios, and proportions to practical situations.

REASONING ABILITY

Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form.

OTHER SKILLS & ABILITIES

Candidate must possess/exhibit the following skills/abilities:

• Not necessary
• Accuracy: uncompromised
• Radius, Print Flow, Work Front
• Coaching ability
• Communication Skills: technical information, internal/external customers, all levels of employees
• Conflict Resolution
• Confidentiality
• Deadlines
• Detail: attention to
• Independence
• Innovation: constantly re-develop systems
• Motivate: others
• Multiple projects/priorities/deadlines
• Negotiation ability
• Organizational skills
• Presentation skills
• Professionalism/professional demeanor
• Project Management
• Safety
• Software: Microsoft Office Suite
• Team: work as a member with all employees

PHYSICAL DEMANDS

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

While performing the duties of this job, the employee is frequently required to sit, and use hands to finger, handle or feel objects, tools or controls. The employee is occasionally required to reach with hands and arms, stand, walk, stoop, kneel, crouch or crawl and climb or balance. The employee is regularly required to hear.

The employee must occasionally lift and/or move up to 50 pounds. Any lifting over 50 pounds would require assistance. Specific vision abilities required by this job include close vision, distance vision and the ability to adjust focus.

WORK ENVIRONMENT

The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

American Packaging Corporation is committed to equal opportunity for all, without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic. American Packaging Corporation will make reasonable accommodations for known physical or mental limitations of otherwise qualified employees and applicants with disabilities unless the accommodation would impose an undue hardship on the operation of our business. EOE/AA Disability/Veteran.

If you are interested in applying for an employment opportunity and need special assistance or an accommodation to apply for a posted position, please contact our Human Resources department at:

.

At American Packaging Corporation (APC), you'll find the packaging career you've been looking for. With competitive salaries, excellent benefits, 401(k) plans and tuition reimbursement programs, we nurture our employees while advancing and promoting diversity and inclusion. As the leading flexible packaging converter in North America for over a century, APC's longstanding success is fueled from the inside out. We're constantly seeking to improve our internal operations and were named a "Best of the Best" in the Best workplaces in the America's awards for 12 years in a row. It's how and why we engage the best and brightest talent to continue propelling our shared success into the future.

LOCATION: Rochester, NY

SUMMARY: An Extrusion Utility Operator is responsible for safely and effectively contributing to team a of 4-5 individuals supporting the operation of extrusion lamination manufacturing equipment. Maintaining a strong work ethic while demonstrating good communication skills are important to exceeding customer expectations, productivity standards, and personal career growth. Extrusion Utility Operators are expected to be able to independently prioritize their time and duties to contribute to the team running efficiently.

ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned.

• Performs duties in a manner that adheres to safety policies and procedures.
• Participate in the training curriculum, learning new aspects of extrusion line operations while completing assigned duties required for operation.
• Maintain quality standards by reviewing product specifications and ensuring thorough completion of assigned production paperwork.
• Operate as a member of a larger team responsible for aspect of overall process. Team members will rely on attention to detail and proper communication to ensure entirety of process is safe and efficient.
• Exercise cautious approach to heavy equipment including use over overhead hoists.
• Completes tasks to ensure area around the machine is clean to GMP & Food Safety standards
• Visual acuity for identifying minor imperfections and material defects.
• Basic understanding of general tool usage including tape measurers, utility knives and screw drivers.
• Good communication skills, both verbal and written with working knowledge of Microsoft Office.

QUALIFICATION REQUIREMENTS:

To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

EDUCATION and/or EXPERIENCE

High school diploma or general education degree (GED); and one to three years related manufacturing experience and/or training; or equivalent combination of education and experience.

LANGUAGE SKILLS

Ability to read and comprehend simple instructions and short correspondences. Ability to write simple correspondence. Ability to effectively present information in one-on-one and small group situations to peers and supervisors within the organization. Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals.

MATHEMATICAL SKILLS

Ability to read/use a tape measurer and apply concepts of basic algebra.

REASONING ABILITY

Ability to apply common sense understanding to carry out detailed but uninvolved written or oral instructions. Ability to reach out for assistance and communicate if instructions or assignments are not clear. Ability to retain information and apply to future situations of similar manner.

PHYSICAL DEMANDS

The physical demands described here are representatives of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to use hands to finger, handle, or feel and talk or hear. The employee frequently is required to sit and reach with hands and arms. The employee is occasionally required to stand; walk; climb or balance; and stoop, kneel, crouch, or crawl. This position may require manual lifting not to exceed 50 lbs - reference your department-specific JHA (job hazard analysis) for departmental lifting restrictions.

WORK ENVIRONMENT

The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

American Packaging Corporation is committed to equal opportunity for all, without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic. American Packaging Corporation will make reasonable accommodations for known physical or mental limitations of otherwise qualified employees and applicants with disabilities unless the accommodation would impose an undue hardship on the operation of our business. EOE/AA Disability/Veteran.

If you are interested in applying for an employment opportunity and need special assistance or an accommodation to apply for a posted position, please contact our Human Resources department at:

.

At American Packaging Corporation (APC), you'll find the packaging career you've been looking for. With competitive salaries, excellent benefits, 401(k) plans and tuition reimbursement programs, we nurture our employees while advancing and promoting diversity and inclusion. As the leading flexible packaging converter in North America for over a century, APC's longstanding success is fueled from the inside out. We're constantly seeking to improve our internal operations and were named a "Best of the Best" in the Best workplaces in the America's awards for 12 years in a row. It's how and why we engage the best and brightest talent to continue propelling our shared success into the future.

LOCATION: COE

Shift - 12 Hour Nights - 2-2-3 Schedule

SUMMARY: Directly supervises production employees and carries out supervisory responsibilities in accordance with the organization's policies and applicable laws. Responsibilities include training employees; planning, assigning, and directing work; appraising performance; rewarding and disciplining employees; addressing complaints and resolving problems.

ESSENTIAL DUTIES AND RESPONSIBILITIES include the following.

Other duties may be assigned.

• Safety
• Leads safety efforts throughout all departments in manufacturing.
• Actively participates in safety programs and makes safety observations, also is a contributing member of a safety team.
• Reviews all observations and accepts responsibility for follow up.
• Conduct Incident investigations & send out by email before the end of the shift when an incident happens.
• Follow up investigation & TOR completed with the department manager within 24hrs.
• Accountability for fire drills & tornado drills, where applicable.

• Equipment Facilitator
• Manages & is responsible for operations of assigned machines 24 hours a day.
• Housekeeping, implementation & maintaining the 5s program.
• Conduct meetings daily with assigned personnel.
• Review Safety Concerns, Maintenance Concerns, Production #s, and Customer complaints.
• Responsible for evaluating employees assigned on shift.
• Look ahead on the schedule & have run conditions for jobs.
• Coordinate with maintenance the work orders & PMs.

• General Responsibilities
• Facilitate on the job training and instruction for team members on the correct use of tools and equipment to ensure proper safety and operating procedures are followed.
• Management representative responsible for all plant operations on off shifts and weekend operations.
• Approves color matching for presses on scheduled shift, where applicable.
• Strong communication with Department Managers on all process and personnel issues.
• Makes decisions concerning troubleshooting and employee issues.
• Knows, understands, implements, & enforces plant procedures and policies.
• Processes shift reports from production and waste on scheduled shift.
• Analyzes production and improves process where opportunity exists.
• Sign off on Finishing run sheets ensuring correct specs are maintained and schedule is accurate on night shifts.
• Leads teams formed to deal with production, manufacturing and safety issues.
• Daily 5s shift audits.
• Daily production status report
• Ensure Raw Material Rejections have required MFG data to process. Coordinate priorities and efforts of maintenance and the engineers
• Inspecting & sign off on all retains & ensure that good quality product is being produced.
• Cylinder check sheets.
• Adjust crews accordingly to minimize OT but still meet goals.
• OK sheets filled out & check off.
• Other duties as assigned.

QUALIFICATION REQUIREMENTS:

To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

EDUCATION and/or EXPERIENCE

Associate's degree (A. A.) or equivalent from two-year college or technical school; with one-year related experience and/or training; or equivalent combination of education and experience.

LANGUAGE SKILLS

Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the public.

MATHEMATICAL SKILLS

Ability to calculate figures and amounts such as discounts, interest, commissions, proportions, percentages, area, circumference, and volume. Ability to apply concepts of basic algebra and geometry.

REASONING ABILITY

Ability to define problems, collect data, establish facts, and draw valid conclusions. Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables.

PHYSICAL DEMANDS

The physical demands described here are representatives of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to use hands to finger, handle, or feel and talk or hear. The employee frequently is required to sit and reach with hands and arms. The employee is occasionally required to stand; walk; climb or balance; and stoop, kneel, crouch, or crawl. This position may require manual lifting not to exceed 50 lbs - reference your department-specific JHA (job hazard analysis) for departmental lifting restrictions.

WORK ENVIRONMENT

The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

American Packaging Corporation is committed to equal opportunity for all, without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic. American Packaging Corporation will make reasonable accommodations for known physical or mental limitations of otherwise qualified employees and applicants with disabilities unless the accommodation would impose an undue hardship on the operation of our business. EOE/AA Disability/Veteran.

If you are interested in applying for an employment opportunity and need special assistance or an accommodation to apply for a posted position, please contact our Human Resources department at:

.

At American Packaging Corporation (APC), you'll find the packaging career you've been looking for. With competitive salaries, excellent benefits, 401(k) plans and tuition reimbursement programs, we nurture our employees while advancing and promoting diversity and inclusion. As the leading flexible packaging converter in North America for over a century, APC's longstanding success is fueled from the inside out. We're constantly seeking to improve our internal operations and were named a "Best of the Best" in the Best workplaces in the America's awards for 12 years in a row. It's how and why we engage the best and brightest talent to continue propelling our shared success into the future.

LOCATION: Chili, NY

HOURS: Days 7am - 7pm on a 2-2-3 schedule

SUMMARY: Assist in daily operations of the Finishing Department.

ESSENTIAL DUTIES AND RESPONSIBILITIES include the following:

• Participates in training, embrace concepts of and actively practice the STOP Safety Program fundamentals to aid American Packaging Corporation's efforts to achieve a zero-accident rate.
• Retrieves all necessary set up information/specifications/guidelines and follows instructions on the job jacket.
• Safely, efficiently and effectively assists with the assigned production machinery equipment monitoring quality, production and waste adhering to all customer specifications.
• Ensures immediate work area and work areas for which Machine Operator has responsibility are free of clutter and debris. Perform all cleaning/sanitation responsibilities, safely using all required cleaning solutions and protective equipment.
• Monitors all quality requirements as outlined by company procedure and specification. Completes necessary sheets for quality checks.
• Actively participates in safety programs and completes required safety observations. Understands and follows plant safety rules.
• Attends and participates in all scheduled meetings (Continuous Quality Improvement, safety, special projects, departmental, etc.).
• Able to work all scheduled shifts and required overtime hours.
• Trains new employees as necessary.
• Other duties as assigned.

QUALIFICATION REQUIREMENTS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

EDUCATION and/or EXPERIENCE: High school diploma or general education degree (GED) required. Previous manufacturing experience preferred.

LANGUAGE SKILLS

Ability to read and comprehend simple instructions, short correspondence, and memos. Ability to write simple correspondence. Ability to effectively present information in one-on-one and small group situations to customers, clients, and other employees of the organization. Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals.

MATHEMATICAL SKILLS

Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent and to draw and interpret bar graphs.

REASONING ABILITY

Ability to apply common sense understanding to carry out detailed but uninvolved written or oral instructions. Ability to deal with problems involving a few concrete variables in standardized situations.

PHYSICAL DEMANDS

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand; use hands to finger, handle, or feel; and talk or hear. The employee is occasionally required to walk and reach with hands and arms. This position may require manual lifting not to exceed 50 lbs - reference your department-specific JHA (job hazard analysis) for departmental lifting restrictions. Specific vision abilities required by this job include close vision, color vision, and ability to adjust focus.

WORK ENVIRONMENT

The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly exposed to moving mechanical parts. The employee is occasionally exposed to airborne particles and vibration. The noise level in the work environment is usually moderate.

American Packaging Corporation is committed to equal opportunity for all, without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic. American Packaging Corporation will make reasonable accommodations for known physical or mental limitations of otherwise qualified employees and applicants with disabilities unless the accommodation would impose an undue hardship on the operation of our business. EOE/AA Disability/Veteran.

If you are interested in applying for an employment opportunity and need special assistance or an accommodation to apply for a posted position, please contact our Human Resources department at:

.

At American Packaging Corporation (APC), you'll find the packaging career you've been looking for. With competitive salaries, excellent benefits, 401(k) plans, and tuition reimbursement programs, we nurture our employees while advancing and promoting diversity and inclusion. As the leading flexible packaging converter in North America for over a century, APC's longstanding success is fueled from the inside out. We're constantly seeking to improve our internal operations and were named a "Best of the Best" in the Best workplaces in the America's awards for 12 years in a row. It's how and why we engage the best and brightest talent to continue propelling our shared success into the future.

LOCATION: Rochester, NY

SUMMARY: THIS POSITION WILL PRIMARILY FOCUS ON THE VALIDATION TASKS OF THE JOB DESCRIPTION

Apply project management and technical expertise to successfully deliver Validation program goals and outcomes while interacting with customers and meeting their expectations.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

Validation

• Manage the scope, schedule, and reporting of Validation program activities for individual products and/or customers; ensure status, risks, and open issues are tracked and that all stakeholders (Management, internal/external clients, Business Managers/Project Managers, and regulatory agencies) are informed in a timely manner.
• Write and execute IQ/OQ/PQ validation protocols, and manage the associated deviation process.
• Management and leadership of the change control, calibration, and gage R&R processes.
• Provide hands-on support to manufacturing areas as required to assist with problem-solving and long-term changes that lead to product/process improvements related to process failures. Collect and analyze data to make data-driven recommendations/decisions.
• Participate in process failure investigations.
• Maintain up-to-date knowledge of validation requirements, practices, and procedures, and instruct other site members participating in validation studies.
• Support risk analysis activities, including design and process FMEA.
• Facilitate team meetings as needed on in-depth process and product analysis, risk assessments, decision-making, and other evaluations related to the Validation program.
• Assist in internal and 3rd party audits.
• Provide backup for Quality Supervisors and Quality technicians.
• Drive continuous improvement opportunities utilizing lean six sigma and the seven basic quality tools, to benefit the success of APC, including profit improvement plans, long and short-term strategic objectives, helping establish problem-solving teams and methods, and recommending capital projects that improve Safety, Productivity, and Quality.
• Write and improve manuals, standards, and procedures as needed.
• Use of statistical software and techniques for analysis of data, including Process Capability (Cpk, Ppk), Statistical Process Control (SPC), and Design of Experiments (DOE)
• Other duties as assigned.

QUALIFICATION REQUIREMENTS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below represent the knowledge, skills, and/or abilities required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

EDUCATION and/or EXPERIENCE

Bachelor's degree in science, mathematics, or engineering from a four-year college or university, and two years related experience and/or training; or equivalent combination of education and experience. ASQ certification is preferred.

LANGUAGE SKILLS

Ability to read, analyze, and interpret common scientific and technical journals, financial reports, and legal documents. Ability to respond to common inquiries or complaints from customers, regulatory agencies, or members of the business community. Ability to write speeches and articles for publication that conform to prescribed style and format. Ability to effectively present information to top management, public groups, and/or boards of directors.

MATHEMATICAL SKILLS

Ability to apply advanced mathematical concepts. Ability to utilize descriptive statistics (average, variation, standard deviation) to analyze data and support process control and capability analysis. Ability to create and interpret control charts, histograms, Pareto charts, and scatter diagrams. Ability to develop statistically appropriate sampling plans. Ability to use and learn statistical analysis software.

REASONING ABILITY

Ability to define problems, collect data, establish facts, and draw valid conclusions. Ability to interpret a wide variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables.

PHYSICAL DEMANDS

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to use hands to finger, handle, or feel, and talk or hear. The employee is frequently required to sit and reach with hands and arms. The employee is occasionally required to stand, walk, climb, or balance, and to stoop, kneel, crouch, or crawl. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. This position may require manual lifting not to exceed 50 lbs - reference your department-specific JHA (job hazard analysis) for departmental lifting restrictions.

WORK ENVIRONMENT

The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

American Packaging Corporation is committed to equal opportunity for all, without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic. American Packaging Corporation will make reasonable accommodations for known physical or mental limitations of otherwise qualified employees and applicants with disabilities unless the accommodation would impose an undue hardship on the operation of our business. EOE/AA Disability/Veteran.

If you are interested in applying for an employment opportunity and need special assistance or an accommodation to apply for a posted position, please contact our Human Resources department at .

At American Packaging Corporation (APC), you'll find the packaging career you've been looking for. With competitive salaries, excellent benefits, 401(k) plans and tuition reimbursement programs, we nurture our employees while advancing and promoting diversity and inclusion. As the leading flexible packaging converter in North America for over a century, APC's longstanding success is fueled from the inside out. We're constantly seeking to improve our internal operations and were named a "Best of the Best" in the Best workplaces in the America's awards for 12 years in a row. It's how and why we engage the best and brightest talent to continue propelling our shared success into the future.

LOCATION: Chili, NY

Hours: DAYS 7am-7pm on a 2-2-3 schedule

SUMMARY: Slits printed rolls from the press or Extruder to individual rolls as per customer specifications. Material being slit is inspected for quality/defects and finished rolls are palletized for shipment to the customer.

ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned.

• Facilitate on the job training and instruction for team members on the correct use of tools and equipment to ensure proper safety and operating procedures are followed.
• Reads job specifications to determine machine adjustments and material requirements.
• Sets up machine.
• Uses lowboy to mount full rolls onto machine.
• Observes machine operation to detect material defects or machine malfunction.
• Measures material dimensions to determine accuracy of machine operation.
• Performs minor machine maintenance such as oiling/greasing machines and changing female knives.
• Prepares required paperwork, including daily production reports, SPC charting, roll tickets and inventory tags.
• Completes work orders when necessary.
• Actively participates in safety programs and makes safety observations. Follows plant safety rules.
• Other duties as assigned.

QUALIFICATION REQUIREMENTS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

EDUCATION and/or EXPERIENCE: High school diploma or general education degree (GED); and one to three months related experience and/or training; or equivalent combination of education and experience.

LANGUAGE SKILLS

Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. Ability to speak effectively before groups of customers or employees of organization.

MATHEMATICAL SKILLS

Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, interpret bar graphs.

REASONING ABILITY

Ability to apply common sense understanding to carry out detailed but uninvolved written or oral instructions. Ability to deal with problems involving a few concrete variables in standardized situations.

PHYSICAL DEMANDS

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand and use hands to finger, handle, or feel. The employee frequently is required to reach with hands and arms and talk or hear. The employee is occasionally required to walk and stoop, kneel, crouch, or crawl. This position may require manual lifting not to exceed 50 lbs - reference your department-specific JHA (job hazard analysis) for departmental lifting restrictions. Specific vision abilities required by this job include close vision, color vision, and ability to adjust focus.

WORK ENVIRONMENT

The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is occasionally exposed to humid conditions, airborne particles, and vibration. The noise level in the work environment is usually moderate.

American Packaging Corporation is committed to equal opportunity for all, without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic. American Packaging Corporation will make reasonable accommodations for known physical or mental limitations of otherwise qualified employees and applicants with disabilities unless the accommodation would impose an undue hardship on the operation of our business. EOE/AA Disability/Veteran.

If you are interested in applying for an employment opportunity and need special assistance or an accommodation to apply for a posted position, please contact our Human Resources department at:

.