Schafer Richardson Jobs in Usa
306 positions found
Hours of Work :
3p-3aDays Of Week :
3/weekWork Shift :
Part Time (United States of America)Job Description :
Your Job: Registered nurse renders highly professional and technical nursing care to assigned patients. Provides direct and indirect patient care using the nursing process (assessment, planning, implementation, and evaluation). Directs and supervises other assigned team members and collaborates with multidisciplinary team members to provide age/developmentally appropriate care in accordance with unit standards of care. Your Job Requirements: • Graduate of an accredited school of professional nursing. BSN Preferred • Current Basic Life Support Certification • Current additional certifications as required by department • Current license to practice professional nursing in Texas or eligibility to do so • Work experience: at least 6 months RN experience Your Job Responsibilities: • Communicate clearly and openly • Build relationships to promote a collaborative environment • Be accountable for your performance • Always look for ways to improve the patient experience • Take initiative for your professional growth • Be engaged and eager to build a winning team Methodist Richardson Medical Center is a 443-bed, full-service, acute care hospital that serves Richardson, Garland, Plano, and surrounding areas in Dallas and Collin counties. We are a Certified Comprehensive Stroke Center as well as the nation's first hospital to receive The Joint Commission's Gold Seal of Approval for Pancreatic/Hepatic/Biliary Cancer Certification. We also provide services at Methodist Richardson Medical Center - Campus for Continuing Care, which include a behavioral health and addiction recovery unit, inpatient rehabilitation, long-term acute care, and more. We strive to have a diverse workforce that reflects the communities we serve and welcomes the skills and talents of all groups. Our reputation as an award-winning employer shows in the distinctions we've earned:- Magnet -designated hospital
- 150 Top Places to Work in Healthcare by Becker's Hospital Review , 2023
- Top 10 Military Friendly Employer, Gold Designation, 2023
- Top 10 Military Spouse Friendly Employer, 2023
- Level III Neonatal Intensive Care Unit
- Level III Trauma Center
Hours of Work :
7p-7aDays Of Week :
Sunday-SaturdayWork Shift :
Job Description :
Your Job: Registered nurse renders highly professional and technical nursing care to assigned patients. Provides direct and indirect patient care using the nursing process (assessment, planning, implementation, and evaluation). Directs and supervises other assigned team members and collaborates with multidisciplinary team members to provide age/developmentally appropriate care in accordance with unit standards of care. Your Job Requirements: • Graduate of an accredited school of professional nursing. BSN Preferred • Current Basic Life Support Certification • Current additional certifications as required by department • Current license to practice professional nursing in Texas or eligibility to do so • Work experience: at least 6 months RN experience Your Job Responsibilities: • Communicate clearly and openly • Build relationships to promote a collaborative environment • Be accountable for your performance • Always look for ways to improve the patient experience • Take initiative for your professional growth • Be engaged and eager to build a winning team Methodist Richardson Medical Center is a 443-bed, full-service, acute care hospital that serves Richardson, Garland, Plano, and surrounding areas in Dallas and Collin counties. We are a Certified Comprehensive Stroke Center as well as the nation's first hospital to receive The Joint Commission's Gold Seal of Approval for Pancreatic/Hepatic/Biliary Cancer Certification. We also provide services at Methodist Richardson Medical Center - Campus for Continuing Care, which include a behavioral health and addiction recovery unit, inpatient rehabilitation, long-term acute care, and more. We strive to have a diverse workforce that reflects the communities we serve and welcomes the skills and talents of all groups. Our reputation as an award-winning employer shows in the distinctions we've earned:- Magnet -designated hospital
- 150 Top Places to Work in Healthcare by Becker's Hospital Review , 2023
- Top 10 Military Friendly Employer, Gold Designation, 2023
- Top 10 Military Spouse Friendly Employer, 2023
- Level III Neonatal Intensive Care Unit
- Level III Trauma Center
Hours of Work :
7pm-7amDays Of Week :
Work Shift :
PRN (United States of America)Job Description :
Your Job:
Registered nurse renders highly professional and technical nursing care to assigned patients.
Provides direct and indirect patient care using the nursing process (assessment, planning, implementation, and evaluation).
Supports the mission, vision, values and strategic goals of Methodist Health System.
Your Job Requirements:
• Graduate of an accredited school of nursing
• Current Basic Life Support Certification
• Current license to practice nursing in Texas or eligibility to do so
• Work experience: Six months RN experience
Your Job Responsibilities:
Adheres to the general hospital standards to promote a cooperative work environment
by utilizing communication skills, interpersonal relationships and team building.
Assumes responsibility for the nursing components of the patient/family/significant
other educational process.
Communicates to the team, co-workers, patients, and family members and evaluates
understanding of informational manner.
Creates and maintains a safe and therapeutic environment for patients, self, coworkers, and facility.
Ensures complete, accurate, and timely written communication of patient information.
Provides a therapeutic environment through safe, accurate, and timely medication and
IV administration.
Takes personal responsibility and initiative for performance and for professional growth
and development.
Utilizes the nursing process to ensure quality patient care is provided throughout the
episode of care.
Other duties as assigned.
- Magnet -designated hospital
- 150 Top Places to Work in Healthcare by Becker's Hospital Review , 2023
- Top 10 Military Friendly Employer, Gold Designation, 2023
- Top 10 Military Spouse Friendly Employer, 2023
- Level III Neonatal Intensive Care Unit
- Level III Trauma Center
Hours of Work :
12p-12aDays Of Week :
Work Shift :
PRN (United States of America)Job Description :
Your Job:
Registered nurse renders highly professional and technical nursing care to assigned patients.
Provides direct and indirect patient care using the nursing process (assessment, planning, implementation, and evaluation).
Supports the mission, vision, values and strategic goals of Methodist Health System.
Your Job Requirements:
• Graduate of an accredited school of nursing
• Current Basic Life Support Certification
• Current license to practice nursing in Texas or eligibility to do so
• Work experience: Six months RN experience
Your Job Responsibilities:
Adheres to the general hospital standards to promote a cooperative work environment
by utilizing communication skills, interpersonal relationships and team building.
Assumes responsibility for the nursing components of the patient/family/significant
other educational process.
Communicates to the team, co-workers, patients, and family members and evaluates
understanding of informational manner.
Creates and maintains a safe and therapeutic environment for patients, self, coworkers, and facility.
Ensures complete, accurate, and timely written communication of patient information.
Provides a therapeutic environment through safe, accurate, and timely medication and
IV administration.
Takes personal responsibility and initiative for performance and for professional growth
and development.
Utilizes the nursing process to ensure quality patient care is provided throughout the
episode of care.
Other duties as assigned.
- Magnet -designated hospital
- 150 Top Places to Work in Healthcare by Becker's Hospital Review , 2023
- Top 10 Military Friendly Employer, Gold Designation, 2023
- Top 10 Military Spouse Friendly Employer, 2023
- Level III Neonatal Intensive Care Unit
- Level III Trauma Center
Hours of Work :
DaysDays Of Week :
PRN 1Work Shift :
PRN (United States of America)Job Description :
Your Job:
Registered nurse renders highly professional and technical nursing care to assigned patients.
Provides direct and indirect patient care using the nursing process (assessment, planning, implementation, and evaluation).
Supports the mission, vision, values and strategic goals of Methodist Health System.
Your Job Requirements:
• Graduate of an accredited school of nursing
• Current Basic Life Support Certification
• Current license to practice nursing in Texas or eligibility to do so
• Work experience: Six months RN experience
Your Job Responsibilities:
Adheres to the general hospital standards to promote a cooperative work environment
by utilizing communication skills, interpersonal relationships and team building.
Assumes responsibility for the nursing components of the patient/family/significant
other educational process.
Communicates to the team, co-workers, patients, and family members and evaluates
understanding of informational manner.
Creates and maintains a safe and therapeutic environment for patients, self, coworkers, and facility.
Ensures complete, accurate, and timely written communication of patient information.
Provides a therapeutic environment through safe, accurate, and timely medication and
IV administration.
Takes personal responsibility and initiative for performance and for professional growth
and development.
Utilizes the nursing process to ensure quality patient care is provided throughout the
episode of care.
Other duties as assigned.
- Magnet -designated hospital
- 150 Top Places to Work in Healthcare by Becker's Hospital Review , 2023
- Top 10 Military Friendly Employer, Gold Designation, 2023
- Top 10 Military Spouse Friendly Employer, 2023
- Level III Neonatal Intensive Care Unit
- Level III Trauma Center
Hours of Work :
1a-1pDays Of Week :
3/WeekWork Shift :
12X3 Mid/Evening (United States of America)Job Description :
Full-time 1pm - 1am
Your Job:
Registered nurse renders highly professional and technical nursing care to assigned patients. Provides direct and indirect patient care using the nursing process (assessment, planning, implementation, and evaluation). Directs and supervises other assigned team members and collaborates with multidisciplinary team members to provide age/developmentally appropriate care in accordance with unit standards of care.
Your Job Requirements:
• Graduate of an accredited school of professional nursing. BSN Preferred
• Current Basic Life Support Certification
• Current additional certifications as required by department (ACLS/PALS)
• Current license to practice professional nursing in Texas or eligibility to do so
• Work experience: at least 12months ER RN experience
Your Job Responsibilities:
• Communicate clearly and openly
• Build relationships to promote a collaborative environment
• Be accountable for your performance
• Always look for ways to improve the patient experience
• Take initiative for your professional growth
• Be engaged and eager to build a winning team
- Magnet -designated hospital
- 150 Top Places to Work in Healthcare by Becker's Hospital Review , 2023
- Top 10 Military Friendly Employer, Gold Designation, 2023
- Top 10 Military Spouse Friendly Employer, 2023
- Level III Neonatal Intensive Care Unit
- Level III Trauma Center
JOB SUMMARY
Manage all planning activities for the dedicated assigned workcell and mentor the Production Planners and Document Coordinators in the workcell.
ESSENTIAL DUTIES AND RESPONSIBILITIES
- Ensure 100% on-time delivery.
- Establish build readiness.
- Maintain efficiency of capacity and customer sizing.
- Maintain accurate revenue forecasting.
- Maintain material control and liability.
- Develop Master Production Schedule (MPS) and load into Jabil’s ERP system, including Purchase Order (PO) coverage.
- Reconcile the MPS to customer PO coverage weekly to ensure that Jabil is not exposed over and above customer PO coverage or other authorized customer demand.
- Ensure the MPS is always 100% accurate and achievable.
- Achieve and maintain 95% MPS goal.
- Own production planning, BOM and document control with or without additional support.
- Analyze material and capacity requirements and communicate constraints to the Workcell and customer based on accurate customer demand.
- Maintain the workcell’s capacity planning model; drive resolution on uneven capacity utilization that keeps Jabil focused on the customer but efficiently utilizing manufacturing resources.
- Meet daily with the Workcell and manufacturing team to assess production schedules, (adjust as necessary based on production results) optimize run quantities, and minimize changeovers to help achieve 100% on time delivery.
- Maintain the customers’ latest contract on file at all times and be familiar with the terms and conditions of the contract regarding customer liability of material planning and production scheduling. This includes the liability window for Jabil material purchase order placement, purchase price for components, and liability for any in-house materials (purchased and manufactured).
- Be the workcell’s “expert” on all planning activities by supporting the Production Planner goal of never starting to build product without having a valid PO, adequate material quantities, and accurate BOM and an accurate routing.
- Lead the Workcell on the creation of Bills of Material (BOMs) and routings that allows accurate tracking of WIP assemblies and accurate inventory movement transactions.
- End-of Life (EOL) management should include chairing a meeting 30 days prior to the last planned build date to create tactics to support the EOL strategy. The Master Planner would own the build schedule, corrections and resolution of MPS to customer demand, planned tactics on deadlines for assemblies out of the various work areas on the floor, deadline for last shipment, and support plan for potential RMAs.
- Manage Jabil purge process for internal Workcell purges.
- Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor.
- Comply and follow all procedures within the company security policy.
EDUCATION & EXPERIENCE REQUIREMENTS
- Bachelor’s degree + 5 years of experience, or Masters + 3 years of related experience, or PhD without experience.
- APICS certification and Supervisor experience also preferred.
- Thorough knowledge of MRP, lead times for specific component types, internal run rates, test development lead times, machine programming lead times and complete understanding of the chronological sequence of events that must occur in order to build a product.
- Or an equivalent combination of education, training, or experience.
Job Summary
The SMT Maintenance Technician is responsible for ensuring the optimal performance and preventative maintenance of Surface Mount Technology (SMT) equipment during second shift hours, minimizing downtime and supporting continuous production.
Job Responsibilities- Perform preventative maintenance, troubleshooting, and repair of SMT equipment including pick-and-place machines, reflow ovens, screen printers, and automated optical inspection (AOI) systems.
- Diagnose and resolve complex electro-mechanical, pneumatic, and software issues on SMT production lines.
- Execute scheduled maintenance tasks according to established procedures and manufacturer specifications.
- Respond promptly to equipment breakdowns and production line interruptions, providing timely and effective solutions to restore functionality.
- Utilize schematics, diagrams, and technical manuals to guide repair and maintenance activities.
- Collaborate with production operators and engineers to identify recurring issues and implement corrective actions.
- Document all maintenance activities, repairs, and parts used accurately in the maintenance management system.
- Support equipment setup, calibration, and changeovers for various product builds.
- Identify opportunities for process improvement and contribute to the development of maintenance best practices.
- Adhere to all safety protocols and quality standards, including ESD procedures.
Job Qualifications
- Associate's degree in Electronics Technology, Mechatronics, or a related technical field, or equivalent relevant experience.
- Minimum of 3-5 years of experience in maintenance and repair of SMT manufacturing equipment.
- Strong understanding of SMT processes, equipment operation, and common failure modes.
- Proficiency in troubleshooting electrical, mechanical, pneumatic, and control systems.
- Ability to read and interpret schematics, blueprints, and technical manuals.
- Experience with various SMT equipment brands (e.g., Fuji, Mydata, ASM, Panasonic) preferred.
- Familiarity with preventive maintenance programs and computerized maintenance management systems (CMMS).
- Strong problem-solving skills and attention to detail.
- Ability to work independently on the night shift and as part of a team.
- Excellent communication skills, both written and verbal.
- Ability to lift up to 50 pounds and stand for extended periods.
- Flexibility to work overtime as needed.
JOB SUMMARY
ESSENTIAL DUTIES AND RESPONSIBILITIES · Supports the Test Engineer in the development and commission of test solutions executing the test qualification of the fixture and program as per the specific system qualification process.· Responsibility for providing the deliverables to support the solution in production to both the Test Support Function and Manufacturing Operations.
· Assists in the build and manufacture of testers, fixtures and environmental tooling as required to meet the customer expectations.
· The Technician Engineer provides the interface to the Test Support function providing comprehensive documentation and training for all test solutions implemented.
· Provides the interface to the Manufacturing function providing comprehensive documentation and coordinating training and education for all test operations implemented.
· Through working with the Test Support function monitor and contribute to the improvement of Test Yields, Efficiency, Intermittencies and Uptime providing accurate reporting and clear targets for improvement.
· In conjunction with the Test Engineer strives to consistently upgrade the test process balancing cost, coverage with the goal of providing an optimized and cost efficient test process.
· Works closely with manufacturing and test support to ensure prioritization of support activities. He/ She will be responsible for coordinating the timetable for test readiness based on the weekly production schedule through the appropriate Test Support staff.
· May perform other duties and responsibilities as assigned.
JOB QUALIFICATIONS
KNOWLEDGE REQUIREMENTS · Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public.
· Ability to define problems, collect data, establish facts, and draw valid conclusions.
· Ability to operate a personal computer including using a Windows based operating system and related software.
· Advanced PC skills, including training and knowledge of Jabil’s software packages.
· Ability to write simple correspondence. Read and understand visual aid.
· Ability to apply common sense understanding to carry out simple one- or two-step instructions.
· Ability to deal with standardized situations with only occasional or no variables.
· Ability to read and comprehend simple instructions, short correspondence, and memos.
· Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals.
· Ability to compute rate, ratio, and percent and to draw and interpret graphs.
Third Shift
Monday - Friday 11:00 p.m. - 7:00 .
ESSENTIAL DUTIES AND RESPONSIBILITIES
· Supports the Test Engineer in the development and commission of test solutions executing the test qualification of the fixture and program as per the specific system qualification process.
· Responsibility for providing the deliverables to support the solution in production to both the Test Support Function and Manufacturing Operations.
· Assists in the build and manufacture of testers, fixtures and environmental tooling as required to meet the customer expectations.
· The Technician Engineer provides the interface to the Test Support function providing comprehensive documentation and training for all test solutions implemented.
· Provides the interface to the Manufacturing function providing comprehensive documentation and coordinating training and education for all test operations implemented.
· Through working with the Test Support function monitor and contribute to the improvement of Test Yields, Efficiency, Intermittencies and Uptime providing accurate reporting and clear targets for improvement.
· In conjunction with the Test Engineer strives to consistently upgrade the test process balancing cost, coverage with the goal of providing an optimized and cost efficient test process.
· Works closely with manufacturing and test support to ensure prioritization of support activities. He/ She will be responsible for coordinating the timetable for test readiness based on the weekly production schedule through the appropriate Test Support staff.
· May perform other duties and responsibilities as assigned.
JOB QUALIFICATIONS
KNOWLEDGE REQUIREMENTS
· Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public.
· Ability to define problems, collect data, establish facts, and draw valid conclusions.
· Ability to operate a personal computer including using a Windows based operating system and related software.
· Advanced PC skills, including training and knowledge of Jabil’s software packages.
· Ability to write simple correspondence. Read and understand visual aid.
· Ability to apply common sense understanding to carry out simple one- or two-step instructions.
· Ability to deal with standardized situations with only occasional or no variables.
· Ability to read and comprehend simple instructions, short correspondence, and memos.
· Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals.
· Ability to compute rate, ratio, and percent and to draw and interpret graphs.
Third Shift
Monday - Friday 11:00 p.m. - 7:00 .
JOB SUMMARY
ESSENTIAL DUTIES AND RESPONSIBILITIES · Supports the Test Engineer in the development and commission of test solutions executing the test qualification of the fixture and program as per the specific system qualification process.· Responsibility for providing the deliverables to support the solution in production to both the Test Support Function and Manufacturing Operations.
· Assists in the build and manufacture of testers, fixtures and environmental tooling as required to meet the customer expectations.
· The Technician Engineer provides the interface to the Test Support function providing comprehensive documentation and training for all test solutions implemented.
· Provides the interface to the Manufacturing function providing comprehensive documentation and coordinating training and education for all test operations implemented.
· Through working with the Test Support function monitor and contribute to the improvement of Test Yields, Efficiency, Intermittencies and Uptime providing accurate reporting and clear targets for improvement.
· In conjunction with the Test Engineer strives to consistently upgrade the test process balancing cost, coverage with the goal of providing an optimized and cost efficient test process.
· Works closely with manufacturing and test support to ensure prioritization of support activities. He/ She will be responsible for coordinating the timetable for test readiness based on the weekly production schedule through the appropriate Test Support staff.
· May perform other duties and responsibilities as assigned.
JOB QUALIFICATIONS
KNOWLEDGE REQUIREMENTS · Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public.
· Ability to define problems, collect data, establish facts, and draw valid conclusions.
· Ability to operate a personal computer including using a Windows based operating system and related software.
· Advanced PC skills, including training and knowledge of Jabil’s software packages.
· Ability to write simple correspondence. Read and understand visual aid.
· Ability to apply common sense understanding to carry out simple one- or two-step instructions.
· Ability to deal with standardized situations with only occasional or no variables.
· Ability to read and comprehend simple instructions, short correspondence, and memos.
· Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals.
· Ability to compute rate, ratio, and percent and to draw and interpret graphs.
Third Shift
Monday - Friday 11:00 p.m. - 7:00 .
ESSENTIAL DUTIES AND RESPONSIBILITIES
· Supports the Test Engineer in the development and commission of test solutions executing the test qualification of the fixture and program as per the specific system qualification process.
· Responsibility for providing the deliverables to support the solution in production to both the Test Support Function and Manufacturing Operations.
· Assists in the build and manufacture of testers, fixtures and environmental tooling as required to meet the customer expectations.
· The Technician Engineer provides the interface to the Test Support function providing comprehensive documentation and training for all test solutions implemented.
· Provides the interface to the Manufacturing function providing comprehensive documentation and coordinating training and education for all test operations implemented.
· Through working with the Test Support function monitor and contribute to the improvement of Test Yields, Efficiency, Intermittencies and Uptime providing accurate reporting and clear targets for improvement.
· In conjunction with the Test Engineer strives to consistently upgrade the test process balancing cost, coverage with the goal of providing an optimized and cost efficient test process.
· Works closely with manufacturing and test support to ensure prioritization of support activities. He/ She will be responsible for coordinating the timetable for test readiness based on the weekly production schedule through the appropriate Test Support staff.
· May perform other duties and responsibilities as assigned.
JOB QUALIFICATIONS
KNOWLEDGE REQUIREMENTS
· Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public.
· Ability to define problems, collect data, establish facts, and draw valid conclusions.
· Ability to operate a personal computer including using a Windows based operating system and related software.
· Advanced PC skills, including training and knowledge of Jabil’s software packages.
· Ability to write simple correspondence. Read and understand visual aid.
· Ability to apply common sense understanding to carry out simple one- or two-step instructions.
· Ability to deal with standardized situations with only occasional or no variables.
· Ability to read and comprehend simple instructions, short correspondence, and memos.
· Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals.
· Ability to compute rate, ratio, and percent and to draw and interpret graphs.
Third Shift
Monday - Friday 11:00 p.m. - 7:00 .
Job Summary
Lead the development, implementation, and optimization of SMT processes, including paste printing, pick-and-place FUJI, reflow soldering, and post-reflow inspection (AOI, X-ray).
Conduct in-depth analysis of SMT process data, identifying root causes of defects and implementing effective corrective and preventive actions.
Develop and qualify new SMT equipment, materials, and processes, ensuring seamless integration into existing production environments.
Provide expert technical guidance and mentorship to junior engineers and production teams on SMT best practices, troubleshooting, and process control.
Collaborate with design engineering, supply chain, and quality departments to ensure manufacturability (DFM) of new products and resolve SMT-related design issues.
Drive continuous improvement projects utilizing methodologies such as Six Sigma, Lean Manufacturing, and SPC to enhance SMT yield, throughput, and reliability.
Author and maintain comprehensive SMT process documentation, including work instructions, process specifications, and failure analysis reports.
Evaluate and implement new SMT technologies and industry trends to maintain Jabil's competitive edge and address evolving product requirements.
Lead efforts in root cause analysis for complex SMT failures, implementing robust solutions to prevent recurrence.
Represent Jabil in technical discussions with customers and suppliers regarding SMT process capabilities and new product introductions.
Bachelor's degree in Electrical Engineering, Mechanical Engineering, Materials Science, or a related technical field. Master's degree preferred.
8-12 years of progressive experience in SMT process engineering within a high-volume electronics manufacturing environment.
Strong Knowledge of FUJI Setup, Nexim and Valor
Demonstrated expertise in SMT equipment operation, programming, and maintenance, including printers, pick-and-place machines (e.g., Fuji, Programming, etc.), reflow ovens, and inspection systems (AOI, SPI, X-ray).
In-depth knowledge of various soldering technologies, solder paste chemistries, and component packaging.
Proven track record of leading process improvement projects and achieving significant yield and cost reductions.
Strong analytical and problem-solving skills with a data-driven approach to decision-making (e.g., SPC, DOE).
Excellent communication, interpersonal, and presentation skills, with the ability to effectively collaborate with cross-functional teams and external stakeholders.
Proficiency in statistical analysis software (e.g., Minitab, JMP) and CAD software for DFM analysis.
Familiarity with industry standards such as IPC-A-610 and J-STD-001.
Ability to work independently and manage multiple complex projects simultaneously.
The SMT Principal Engineer I at Jabil, Inc. is a senior technical contributor responsible for leading advanced surface mount technology (SMT) process development, optimization, and continuous improvement initiatives across multiple manufacturing lines to ensure high-quality and efficient production of complex electronic assemblies.
Job Responsibilities
- Lead the development, implementation, and optimization of SMT processes, including paste printing, pick-and-place FUJI, reflow soldering, and post-reflow inspection (AOI, X-ray).
- Conduct in-depth analysis of SMT process data, identifying root causes of defects and implementing effective corrective and preventive actions.
- Develop and qualify new SMT equipment, materials, and processes, ensuring seamless integration into existing production environments.
- Provide expert technical guidance and mentorship to junior engineers and production teams on SMT best practices, troubleshooting, and process control.
- Collaborate with design engineering, supply chain, and quality departments to ensure manufacturability (DFM) of new products and resolve SMT-related design issues.
- Drive continuous improvement projects utilizing methodologies such as Six Sigma, Lean Manufacturing, and SPC to enhance SMT yield, throughput, and reliability.
- Author and maintain comprehensive SMT process documentation, including work instructions, process specifications, and failure analysis reports.
- Evaluate and implement new SMT technologies and industry trends to maintain Jabil's competitive edge and address evolving product requirements.
- Lead efforts in root cause analysis for complex SMT failures, implementing robust solutions to prevent recurrence.
- Represent Jabil in technical discussions with customers and suppliers regarding SMT process capabilities and new product introductions.
Job Qualifications
- Bachelor's degree in Electrical Engineering, Mechanical Engineering, Materials Science, or a related technical field. Master's degree preferred.
- 8-12 years of progressive experience in SMT process engineering within a high-volume electronics manufacturing environment.
- Strong Knowledge of FUJI Setup, Nexim and Valor
- Demonstrated expertise in SMT equipment operation, programming, and maintenance, including printers, pick-and-place machines (e.g., Fuji, Programming, etc.), reflow ovens, and inspection systems (AOI, SPI, X-ray).
- In-depth knowledge of various soldering technologies, solder paste chemistries, and component packaging.
- Proven track record of leading process improvement projects and achieving significant yield and cost reductions.
- Strong analytical and problem-solving skills with a data-driven approach to decision-making (e.g., SPC, DOE).
- Excellent communication, interpersonal, and presentation skills, with the ability to effectively collaborate with cross-functional teams and external stakeholders.
- Proficiency in statistical analysis software (e.g., Minitab, JMP) and CAD software for DFM analysis.
- Familiarity with industry standards such as IPC-A-610 and J-STD-001.
- Ability to work independently and manage multiple complex projects simultaneously.
JOB SUMMARY
ESSENTIAL DUTIES AND RESPONSIBILITIES · Provides input for colleague’s performance appraisals· Assists Test Engineers when commissioning new test equipment.
· Provides technical assistance to other technicians on the same shift.
· Provides line support to manufacturing for all test processes.
· Ensures “machine down” calls are responded to in a timely manner.
· Liaises with manufacturing to determine repair priorities.
· Ensures adequate spares are available for all allocated equipment.
· Ensures Preventative Maintenance is carried out at specified intervals on all allocated equipment.
· Liaises with manufacturing to ensure Preventative Maintenance does not impact production schedule.
· Escalates to Test Engineers any unresolved/ongoing issues.
· Instructs operators on safe/effective use of test equipment.
· Provides daily report of all line issues.
· Provides weekly/quarterly downtime reports for allocated equipment.
· Sources spares from the most cost effective supplier.
· May perform other duties and responsibilities as assigned.
JOB QUALIFICATIONS
KNOWLEDGE REQUIREMENTS · Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public.
· Ability to define problems, collect data, establish facts, and draw valid conclusions.
· Ability to operate a personal computer including using a Windows based operating system and related software.
· Advanced PC skills, including training and knowledge of Jabil’s software packages.
· Ability to write simple correspondence. Read and understand visual aid.
· Ability to apply common sense understanding to carry out simple one- or two-step instructions.
· Ability to deal with standardized situations with only occasional or no variables.
· Ability to read and comprehend simple instructions, short correspondence, and memos.
· Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals.
· Ability to compute rate, ratio, and percent and to draw and interpret graphs.
Second Shift: Monday - Friday 3:00 p.m. - 11:30 p.m.
Responsible for the verification testing, diagnosing and repairing of electronic circuit board assemblies.
Third Shift: Monday - Friday 11:00 p.m. - 7:00 a.m.
ESSENTIAL DUTIES AND RESPONSIBILITIES
· Diagnose and repair to basic powered functional test failures (power, traffic, network issues) to a component level on electronic circuit board assemblies while maintaining minimal quantities of Engineering and Component hold assemblies.
· Exhibit proficiency in the use of electronic test and measurement equipment.
· Understand and utilize assembly documentation such as but not limited to the following; Schematics, BOM’s, EC documents, Visuals, Debug, Testing tools and procedures.
· Assist Test Engineering department in an ongoing data evaluation program for improving the efficiency of the diagnosis of assemblies.
· Understand, recognize and execute Jabil production requirements, rules, policies and procedures.
· Work as a team member to achieve Diagnostic department’s process yield goals.
· Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor.
· Comply and follow all procedures within the company security policy.
· May perform other duties and responsibilities as assigned.
JOB QUALIFICATIONS
KNOWLEDGE REQUIREMENTS
· Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry.
· Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public.
· Ability to define problems, collect data, establish facts, and draw valid conclusions.
· Ability to operate a personal computer including using a Windows based operating system and related software.
· Advanced PC skills, including training and knowledge of Jabil’s software packages.
· Ability to write simple correspondence. Read and understand visual aid.
· Ability to apply common sense understanding to carry out simple one- or two-step instructions.
· Ability to deal with standardized situations with only occasional or no variables.
· Ability to read and comprehend simple instructions, short correspondence, and memos.
· Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals.
· Ability to compute rate, ratio, and percent and to draw and interpret graphs.
JOB SUMMARY
Manage all planning activities for the dedicated assigned workcell and mentor the Production Planners and Document Coordinators in the workcell.
ESSENTIAL DUTIES AND RESPONSIBILITIES
- Ensure 100% on-time delivery.
- Establish build readiness.
- Maintain efficiency of capacity and customer sizing.
- Maintain accurate revenue forecasting.
- Maintain material control and liability.
- Develop Master Production Schedule (MPS) and load into Jabil’s ERP system, including Purchase Order (PO) coverage.
- Reconcile the MPS to customer PO coverage weekly to ensure that Jabil is not exposed over and above customer PO coverage or other authorized customer demand.
- Ensure the MPS is always 100% accurate and achievable.
- Achieve and maintain 95% MPS goal.
- Own production planning, BOM and document control with or without additional support.
- Analyze material and capacity requirements and communicate constraints to the Workcell and customer based on accurate customer demand.
- Maintain the workcell’s capacity planning model; drive resolution on uneven capacity utilization that keeps Jabil focused on the customer but efficiently utilizing manufacturing resources.
- Meet daily with the Workcell and manufacturing team to assess production schedules, (adjust as necessary based on production results) optimize run quantities, and minimize changeovers to help achieve 100% on time delivery.
- Maintain the customers’ latest contract on file at all times and be familiar with the terms and conditions of the contract regarding customer liability of material planning and production scheduling. This includes the liability window for Jabil material purchase order placement, purchase price for components, and liability for any in-house materials (purchased and manufactured).
- Be the workcell’s “expert” on all planning activities by supporting the Production Planner goal of never starting to build product without having a valid PO, adequate material quantities, and accurate BOM and an accurate routing.
- Lead the Workcell on the creation of Bills of Material (BOMs) and routings that allows accurate tracking of WIP assemblies and accurate inventory movement transactions.
- End-of Life (EOL) management should include chairing a meeting 30 days prior to the last planned build date to create tactics to support the EOL strategy. The Master Planner would own the build schedule, corrections and resolution of MPS to customer demand, planned tactics on deadlines for assemblies out of the various work areas on the floor, deadline for last shipment, and support plan for potential RMAs.
- Manage Jabil purge process for internal Workcell purges.
- Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor.
- Comply and follow all procedures within the company security policy.
EDUCATION & EXPERIENCE REQUIREMENTS
- Bachelor’s degree + 5 years of experience, or Masters + 3 years of related experience, or PhD without experience.
- APICS certification and Supervisor experience also preferred.
- Thorough knowledge of MRP, lead times for specific component types, internal run rates, test development lead times, machine programming lead times and complete understanding of the chronological sequence of events that must occur in order to build a product.
- Or an equivalent combination of education, training, or experience.
JOB SUMMARY
Responsible for the verification testing, diagnosing and repairing of electronic circuit board assemblies.Third Shift: Monday - Friday 11:00 p.m. - 7:00 a.m.
ESSENTIAL DUTIES AND RESPONSIBILITIES
· Exhibit proficiency in the use of electronic test and measurement equipment.
· Understand and utilize assembly documentation such as but not limited to the following; Schematics, BOM’s, EC documents, Visuals, Debug, Testing tools and procedures.
· Assist Test Engineering department in an ongoing data evaluation program for improving the efficiency of the diagnosis of assemblies.
· Understand, recognize and execute Jabil production requirements, rules, policies and procedures.
· Work as a team member to achieve Diagnostic department’s process yield goals.
· Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor.
· Comply and follow all procedures within the company security policy.
· May perform other duties and responsibilities as assigned. JOB QUALIFICATIONS
KNOWLEDGE REQUIREMENTS · Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry.
· Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public.
· Ability to define problems, collect data, establish facts, and draw valid conclusions.
· Ability to operate a personal computer including using a Windows based operating system and related software.
· Advanced PC skills, including training and knowledge of Jabil’s software packages.
· Ability to write simple correspondence. Read and understand visual aid.
· Ability to apply common sense understanding to carry out simple one- or two-step instructions.
· Ability to deal with standardized situations with only occasional or no variables.
· Ability to read and comprehend simple instructions, short correspondence, and memos.
· Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals.
· Ability to compute rate, ratio, and percent and to draw and interpret graphs.
JOB SUMMARY
ESSENTIAL DUTIES AND RESPONSIBILITIES · Provides input for colleague’s performance appraisals· Assists Test Engineers when commissioning new test equipment.
· Provides technical assistance to other technicians on the same shift.
· Provides line support to manufacturing for all test processes.
· Ensures “machine down” calls are responded to in a timely manner.
· Liaises with manufacturing to determine repair priorities.
· Ensures adequate spares are available for all allocated equipment.
· Ensures Preventative Maintenance is carried out at specified intervals on all allocated equipment.
· Liaises with manufacturing to ensure Preventative Maintenance does not impact production schedule.
· Escalates to Test Engineers any unresolved/ongoing issues.
· Instructs operators on safe/effective use of test equipment.
· Provides daily report of all line issues.
· Provides weekly/quarterly downtime reports for allocated equipment.
· Sources spares from the most cost effective supplier.
· May perform other duties and responsibilities as assigned.
JOB QUALIFICATIONS
KNOWLEDGE REQUIREMENTS · Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public.
· Ability to define problems, collect data, establish facts, and draw valid conclusions.
· Ability to operate a personal computer including using a Windows based operating system and related software.
· Advanced PC skills, including training and knowledge of Jabil’s software packages.
· Ability to write simple correspondence. Read and understand visual aid.
· Ability to apply common sense understanding to carry out simple one- or two-step instructions.
· Ability to deal with standardized situations with only occasional or no variables.
· Ability to read and comprehend simple instructions, short correspondence, and memos.
· Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals.
· Ability to compute rate, ratio, and percent and to draw and interpret graphs.
Second Shift: Monday - Friday 3:00 p.m. - 11:30 p.m.
Jabil is seeking a Site Engineering Manager to lead industrial engineering, facilities engineering, and site infrastructure for a fast ‑ growing electronics manufacturing operation. This leader will drive production efficiency, equipment reliability, and site readiness across high ‑ mix/high ‑ volume PCB assembly and secondary processes.
What You’ll Do
Lead and develop a multidisciplinary engineering team, building technical capability, coaching future leaders, and fostering a culture of continuous improvement.
Oversee process engineering across SMT lines, secondary processes (e.g., conformal coating, selective coating, potting), and automated inspection systems (AOI/AXI, Neptune, etc.).
Optimize production layouts, workflows, and capacity to support throughput, cost, and quality targets.
Direct facilities operations, including preventive maintenance, building infrastructure, utilities, space planning, and site expansion projects.
Ensure safety, environmental compliance, and readiness of all site systems supporting electronics manufacturing.
Manage engineering budgets, capital planning, and resource allocation, understanding how engineering decisions influence productivity, cost structure, and P&L performance.
Partner cross ‑ functionally with Operations, Quality, Supply Chain, and EHS to support scalable growth and new product introduction.
What You Bring
Bachelor’s degree in engineering or related field, plus 5-8 years’ related experience and 2-3 years in a management role required , or equivalent combination of education and experience.
Experience in electronics manufacturing environments with exposure to SMT assembly, PCBA flow, coating applications, and automated inspection technologies.
Strong foundation in industrial engineering principles, facilities management, and continuous improvement methodologies.
Proven ability to develop people, strengthen engineering organizations, and build succession pipelines.
Analytical, data ‑ driven decision maker with awareness of cost drivers, ROI, and financial impact of engineering initiatives.
Effective communicator and collaborator with a hands ‑ on leadership style.
