Rsi Indicator Formula Jobs in Usa

• The ability to perform the duties and responsibility of the position, with or without reasonable accommodations for disabilities.
• The ability to consistently lift, push or pull loads of up to fifty (50) pounds. (Unless nursing 50)
• Sufficient strength, mobility and stamina to make frequent location and position changes, assist with patient care, and perform other physical activities of average difficulty.
• Candidates whose disabilities make them unable to meet the requirements will still be considered fully qualified if they can perform the essential functions of the job with reasonable accommodations.
• May be exposed to infectious or contagious disease.
• May have to handle emergency situations.
• May be subject to irregular hours.
• May be required to wear protective equipment such as eye protection, face protection, masks, sterile/nonsterile gloves, isolation gowns.
• May be exposed to toxic/caustic/chemicals/detergents.
• Physical activities include continuous sitting, and occasional walking, standing, bending, squatting, climbing, kneeling and twisting.
• Activity Conditions (Occasionally, Frequently, Continuously):
  • Sitting- Frequently
  • Walking- Frequently
  • Standing- Occasionally
  • Bending-Occasionally
  • Squatting - Occasionally
  • Climbing-Occasionally
  • Kneeling-Occasionally
  • Twisting-Occasionally

• Must be able to see with corrective eye wear.
• Must be able to hear clearly with assistance.

• Proactively assesses patients and establishes Discharge Care (DC) Plan. consults with and keeps unit/Interdisciplinary Team informed of DC plan. Documentation is completed in a timely manner.
• Performs Utilization Review accurately and refers cases appropriately for secondary review. Performs initial utilization review and continued stay reviews. Ensures status orders are in place and keeps insurance company informed for certification of days. Documentation is completed in a timely manner.
• Assesses the patient by collecting information about the patient's home situation and health care needs through direct client contact and other relevant sources to include family, caregivers, etc.
• Utilizes established criteria to determine appropriateness of Inpatient admission/status to ensure the appropriate level of care and assists staff with interpretation of the criteria, as indicated.
• Attends department meetings and participates in unit activities to stay informed.
• Provides "Choice Letter" and assists the patient with selecting a DME company, Nursing Home, Assisted Living facility, Home Health agency, Hospice, etc.; obtains signature on the choice Letter by the patient/family and ensures placement in the chart and documents.
• Provides adequate communication of relevant issues to the interdisciplinary healthcare team and initiates referrals to service providers as identified in the discharge plan. Coordinates discharge teaching.
• Ensures that the interdisciplinary care/discharge plan is consistent with the patients clinical course, continuing care needs and covered services and modifies, as indicated.
• Reports and discusses with attending physicians and or physician advisors the appropriateness of resource utilization, consultations, and treatment plan.
• Assists with establishing Advance Directives, Medical power of Attorney, etc. as indicated. Identifies and establishes legal guardian/decision maker.
• Utilizes the Patient/Visitor Safety Learning Report to document patient safety issues and complaints related to care.
• Engages patients to actively participate in meeting short and long-term healthcare goals and identifies appropriate community resources and support services to assist the patient.
• Tracks and ensures that the Important Message from Medicare has been provided to the Medicare patient on admission and that a follow-up copy has been provided, initialed and placed in the chart.
• Review's the patient's progress as described by the various disciplines involved on an ongoing basis to ensure an effective plan is in place.
• Ensures discharge prescriptions, orders, and appointments are made, DME, OP services, Nursing Home care, etc. have been arranged and discharge, transfer, and referral forms are as complete as possible prior to patient departure.
• Develops a discharge/care management plan in collaboration with other members of the healthcare team, the physician and 3rd party payers, as indicated.
• Communicates the plan with the patient and family/significant other and adjusts the plan based on the patient's progress, input, and needs.
• Performs other duties as assigned.

• Required
  
  • High School Diploma, GED, or equivalent
  • Associate's degree in Nursing
• Preferred
  
  • Bachelor's degree in Nursing

• Required
  
  • 3-5 years Clinical Experience as a Registered Nurse in a Healthcare/Medical setting
• Preferred
  
  • 2-3 years in a Supervisor Role

• Required
  
  • Registered Nurse (RN), with authorization to practice in the State of Texas
  • Basic Life Support (BLS) Certification
    
    • Must obtain within ninety (90) days of start date
• Preferred
  
  • Relevant national certification

Position Title: LTSS Service Care Manager

Work Location: Polk County, FL; Central Tampa (focus zip codes: 33607, 33614, 33617)

Assignment Duration: 3 Months

Work Schedule: 8:00 AM - 5:00 PM, Monday-Friday

Work Arrangement: Remote (Field-Based with 80% Travel)

Managing a case load for healthcare members with long term care needs.

Geriatric long term care.

• 
  
• 
  

  Managing a case load for healthcare members with long term care needs.

  
  
  
• 
  

  Member assessments and notes.

  
  
  
• 
  

  Complete assessments with members, caregivers, or providers to obtain information regarding client status, support system, and need for services for care plan development.

  
  
  
• 
  

  Monitor delivery of services and follow-up with members, caregivers, or providers through in person visits and telephonic contact.

  
  
  
• 
  

  Authorize and coordinate referral for services.

  
  
  
• 
  

  Ensure provider services are delivered without gaps and identify functional deficiencies in plans of care.

  
  
  
• 
  

  Assist in coordinating the development of informal or voluntary services to integrate into the member care plan.

  
  
  
• 
  

  Collaborate with discharge planners, physicians, and other parties to ensure appropriate discharge plan, care plan, and coordination of acute care and long-term care services.

  
  
  
• 
  

  Assist member with filing and resolving complaints and appeals.

  
  
  

• 
  
• 
  

  Requires a Bachelor's degree and 2 - 4 years of related experience (degree within Healthcare such as Psychology, Sociology, etc.).

  
  
  
• 
  

  Field experience would need to be long term to have the team consider someone that does not have a degree within the space they are looking for.

  
  
  
• 
  

  Valid driver's license required.

  
  
  
• 
  

  2+ years of Care Management experience (field experience is a must).

  
  
  
• 
  

  Caseloads of 50, 60, 70 members - bonus if it is geriatric.

  
  
  
• 
  

  Long Term Care Medicaid experience.

  
  
  
• 
  

  Medicaid / Medicare experience.

  
  
  
• 
  

  Need to see experience being able to manage high case load.

  
  
  
• 
  

  Fast paced environment regarding new processes and programs.

  
  
  
• 
  

  Comfortable connecting with IT or traveling to office/IT space if equipment fails.

  
  
  
• 
  

  All documentation must be completed within system within 24 hours.

  
  
  
• 
  

  Experience with electronic medical health records.

  
  
  
• 
  

  Home Health Experience.

  
  
  

• 
  
• 
  

  Nice to haves: Discharge Planning; Working with TruCare software.

  
  
  
• 
  

  Disqualifiers: Not having field experience; Not having previous experience with high caseloads.

  
  
  
• 
  

  Performance indicator: Bilingual preferred when applicable.
  
  

  
  
  Candidate Requirements
  
  Education/Certification
  Required: Requires a Bachelor's degree and 2 - 4 years of related experience. (Bachelors Degree should be within the realm of Healthcare) - Psychology, Sociology, etc.
  
  Field experience would need to be long term to have the team consider someone that does not have a degree within the space they are looking for.
  Preferred: n/a
  
  Licensure
  Required: Valid driver's license
  Preferred: n/a
  
  
  • 
    
  • Years of experience required
    
  • Disqualifiers
    
  • Best vs. average
    
  • Performance indicators
    
  
  
  Must haves:
  
  • 
    
  • 2+ years of Care Management experience (field experience is a must)
    
  • Caseloads of 50,60,70 members - bonus if it is geriatric
    
  • Long Term Care Medicaid experience
    
  • Medicaid / Medicare experience
    
  • Need to see experience being able to manage high case load
    
  • Fast paced environment regarding new processes and programs
    
  • They must be comfortable being able to connect with IT should their equipment fail in the field, etc. or be able to go into an office location or IT space.
    
  • All documentation must be within system within 24 hours of completion
    
  • Experience with electronic medical health records
    
  • Home Health Experience
    
  
  
  Nice to haves:
  
  1. 
     
  2. Discharge Planning
     
  3. Working with TruCare which is the software the team uses
     
  
  Disqualifiers:
  
  
  • 
    
  • Not having field experience
    
  • Not having previous experience with high caseloads
    
  
  
  Performance indicators: Bilingual always preferred - req will indicate if Bilingual is required via the notes section
  
  
  • 
    
  • Top 3 must-have hard skills
    
  • Level of experience with each
    
  • Stack-ranked by importance
    
  • Candidate Review & Selection
    
  
  
  1
  2 years of field case management
  
  2
  Technology Savy
  
  3
  Must be able to look at calendar and manage time - ensuring enough time for documentation
  
  

Under direction and/or general supervision from higher level management of professional staff, performs a variety of professional level work in current and advance planning; and provides information and assistance to developers and the public on planning related matters. This employee may also exercise functional and technical supervision over lower level professional and technical staff.
Distinguishing Characteristics: This is the entry level class in the professional planning series. This class is distinguished from the Associate Planner by the performance of the more routine tasks and duties assigned to positions within the series including the responsibility for assignments in the fields of current or advance planning which require the application of fundamental planning principles. Since this class is typically used as a training class, employees may have limited or no directly related work experience.
Position Snapshot/A Day in the Life: Under the direction of a Senior Planner, this is the entry level class in the professional planning series. A typical day consists of reviewing development projects, collection of data to prepare staff reports for Planning Commission/City Council, provide information to developers and general public, evaluate and approve sign proposals, review and process design reviews, conditional use permits, variances and work on other planning related projects. Assist the general public via telephone and email.

Essential Functions

The employee must have the ability to:

• Prepare agenda items and support material including resolutions and agreements for the City Council and Planning Commission, various committees and advisory boards as directed.
• Review development projects and serve as liaison for the Planning Division in meetings with developers, architects, engineers, consultants, outside agencies and the general public regarding City development policies and standards.
• Research, analyze and interpret social, economic, population and land use data and trends; prepare staff reports on various planning matters and elements of the general plan.
• Collect information and prepare the City's Development Activity Report; compile information and make recommendations on special studies and prepare planning reports.
• Prepare request for qualifications and proposals as related to redevelopment projects; evaluate bid proposals and development requirements; review and approve development proposals and applications which comply with appropriate regulations and policies; inspect sites for project compliance.
• Review and process design reviews, conditional use permits and variances; prepare staff reports; evaluate and approve business licenses and sign proposals; update building and occupancy permits.
• Provide information on landscape requirements to developers and the general public; inspect proposed site for landscape requirements and compliance; develop and revise landscape requirements and standards.
• Issue grading and building permits; collect and refund street tree fees, landscape maintenance bonds and agreements; plan check landscape and irrigation plans.
• Maintain and update the General Plan mailing list; notify local newspapers on public hearings.
• Prepare initial environmental impact studies; assist in preparing or reviewing environmental impact reports.
• Maintain and update files and maps on specific development projects; prepare and update various lists related to planning and development including lists or local developers, vendors and homeowners for project areas.
• Answer questions and provide information to the public; respond to written inquiries to the City as it relates to the City's planning function.
• Perform any other tasks or functions deemed necessary to the daily operations of the employer.

A combination of experience and training that would likely provide the required knowledge and abilities is qualifying. The employee must have the knowledge of:

• Principles and practices of urban planning and development.
• Site planning, landscape and architectural design.
• Current literature, information sources, and research techniques in the field of urban planning.

• Learn laws underlying general plans, zoning and land divisions.
• Learn applicable environmental laws, regulations, and methods of assessment.
• Analyze and compile technical and statistical information and prepare reports.
• Understand and carry out oral and written directions.
• Communicate clearly and concisely, both orally and in writing.
• Establish and maintain cooperative working relationships with those contacted in the course of work.

Successful candidates will be required to complete an annual Statement of Economic Interest Form (700 Form) and bi-annual ethics training pursuant to AB 1234.

The City of Fontana has a flexible benefits plan. This plan allows for employees to select benefits based upon their individual needs. Full-time and Classified Part-time employees are eligible for benefits.

Please to view our excellent employee benefit options.

• 
  
  
• High School graduate or equivalent
  
  
• Some college
  
  
• Trade School Graduate or Apprenticeship
  
  
• Associate's Degree
  
  
• Bachelor's Degree
  
  
• Master's Degree
  
  
• Doctorate
  
  
• None of the Above
  
  

• 
  
  
• No experience
  
  
• Less than one (1) year.
  
  
• One (1) year or more, but less than two (2) years.
  
  
• Two (2) years or more, but less four (4) years.
  
  
• Four (4) or more years but less than six (6) years.
  
  
• Six years or more
  
  

Required Question

Summary:

Assesses and treats the impact of illness, injury, developmental or psychological impairments of the patient in the performance areas of Activities of Daily Living including; range-of-motion, grooming & hygiene, eating, dressing, toileting, driving, cooking, or working. Is responsible for assisting the patient to regain, develop, and learn skills to enable them to achieve optimal independence, reduce joint strain, prevent further joint damage and conserve energy. Is responsible for developing, implementing and monitoring the plan of care for the person served. Performs and directs administration of all occupational therapy modalities & collaborates throughout the process with the patient, their family and the interdisciplinary team. 

Responsibilities:

• Verifies physician orders prior to evaluation. Evaluates each patient before administering treatments, incorporating psychological and physical issues. Evaluations must include thorough reading of patient's chart & history; may include objective measurements relative to the patient’s diagnosis and condition. Completes the evaluation & establishes goals and plan of care in collaboration with the patient, his/her family and other healthcare workers as appropriate. 
• Administers and directs administration of all Occupational Therapy treatment & modalities to assist the patient in reaching his/her maximum rehabilitation potential through the use of ADL activities, splinting, ROM, endurance building, strengthening exercises, cognitive retraining, coordination & dexterity training. Has knowledge of indications and contraindications. Calls the physician if treatment ordered is not indicated. 
• Acquisitions appropriate equipment, checks equipment being used for safety, and communicates the evaluation, treatment procedures and the use of the specific equipment to patient and family. 
• Applies or supervises appropriate treatments or modalities such as; therapeutic exercises, hot moist packs, ultrasound, electrical stimulation, paraffin, soft tissue mobilization, balance training and functional mobility training. Checks frequently with patient for tolerance of modality given. 
• Maintains contact with the referring physician regarding patient progress. Observes treatment effects & recommends changes to physician if indicated. 
• Creates home programs for patients whenever indicated. Explains the program to patient, asking for return demonstrations and trains the family if necessary. 
• Directs and oversees COTA’s and Rehabilitation Assistants during occupational therapy treatments. Participates with on-the-job training of rehabilitation personnel. 
• Maintains records of all patient treatments as required, information must include but is not limited to, subjective & objective information, assessment and plan for each treatment given or recommended. Completes appropriate documentation for a specific area in which the therapy is provided. 
• Promotes the team approach to delivery of rehabilitation services, while serving as a representative in the field of Occupational Therapy. 
• In collaboration with the rehabilitation team, develops and implements measures for quality assurance and participates in performance improvement activities. 
• Maintains professional competence through continuing education and participation in appropriate professional groups. Obtains professional continuing education requirements to maintain licensure. 
• Ensures charges correlate with treatment session documentation and length of time in therapy. 
• Maintains productivity standards. 

Requirements:

Education:

• Doctorate, Masters, or Bachelors degree in Occupational Therapy. 

Experience:

• One year Occupational Therapy preferred.
• Demonstrates accountability and skills in assessment/evaluation, decision-making and time management. Should have strong interpersonal, verbal and written communication and organizational skills.

Certifications, Registrations, or Licenses:

• Current New Mexico American Occupational Therapy Association licensure & BLS certification required.

Work Schedule:

MULTIPLE SHIFTS AVAILABLE

Work Type:

Full Time

Safety Advisor-Transportation

Sunrise, Florida (hybrid/onsite)

Reports to Chief Strategy Officer

Seeking those with a minimum 3+ years of commercial transportation experience

Role Summary

The Rhythm Safety Advisor (RSA) serves as a safety and compliance partner to commercial transportation fleets utilizing the Rhythm platform. This role helps organizations strengthen their safety programs, maintain regulatory compliance, and improve operational risk performance.

As part of the SaferFleet program, an RSA works directly with customers to interpret safety data, identify risk indicators, and guide practical improvements across driver safety, fleet operations, and regulatory compliance. The position combines safety expertise, regulatory knowledge, and operational problem-solving to help organizations translate safety insights into actionable improvements.

Detailed Responsibilities

CUSTOMER SAFETY ADVISORY

• Serve as the primary safety advisor for assigned customers
• Interpret safety data and risk indicators from the Rhythm platform
• Provide practical guidance to improve driver safety and operational risk performance
• Support customers in implementing corrective actions following incidents or safety concerns

SAFETY PROGRAM SUPPORT

• Conduct safety and DOT baseline assessments for new customers
• Help organizations strengthen safety policies, procedures, and operational practices
• Provide coaching and guidance to supervisors and operational leaders
• Facilitate safety improvement discussions with customer leadership teams

REGULATORY COMPLIANCE OVERSIGHT

• Assist customers in maintaining compliance with FMCSA and DOT regulations
• Review driver qualification file practices and compliance documentation
• Support customers in preparing for potential DOT audits or regulatory reviews
• Identify compliance gaps and recommend corrective actions

INCIDENT AND RISK MANAGEMENT

• Review accidents, injuries, and safety incidents with customers
• Define root cause analysis and corrective action steps
• Provide post-incident coaching and risk reduction guidance

RHYTHM PLATFORM UTILIZATION

• Help customers effectively use the Rhythm platform to monitor safety performance
• Connect safety data from telematics, MVR monitoring, and ops systems to real-world actions
• Ensure customers achieve measurable value and ROI from the platform

PORTFOLIO SAFETY MONITORING

• Monitor safety performance across assigned customer accounts
• Identify elevated risk indicators and coordinate targeted intervention when needed
• Support the development of safety dashboards and performance reporting

Qualifications

EXPERIENCE

• Minimum 3 to 5 years of experience in safety, fleet operations, transportation compliance, or risk management.
• Experience working with FMCSA, DOT, and OSHA regulations a must.
• Experience supporting driver safety programs, fleet operations, or operational safety initiatives.
• Conducting hours-of-service (HOS) log audits and addressing compliance violations.
• Performing root cause analysis and post-incident investigations related to accidents, injuries, and operational incidents
• Developing and maintaining safety policies, procedures, and operational safety documentation
• Managing Driver Qualification Files (DQF), including driver application review, onboarding compliance, and ongoing documentation maintenance
• Coordinating driver onboarding compliance processes, including required regulatory documentation
• Managing or supporting drug and alcohol testing programs, including consortium participation and regulatory compliance
• Monitoring driver medical certification (DOT physicals) and regulatory expiration requirements

KNOWLEDGE AND SKILLS

• Strong working knowledge of FMCSA, DOT, and OSHA regulatory frameworks governing commercial fleet operations
• Ability to interpret regulatory requirements and translate them into practical operational guidance
• Strong analytical skills with the ability to identify safety trends, risk indicators, and operational gaps
• Ability to communicate complex safety and compliance concepts in a clear, practical manner to operational leaders and commercial/non-commercial drivers
• Experience facilitating corrective action planning and safety improvement initiatives
• Ability to review operational documentation and evaluate compliance readiness
• Strong organizational and documentation management skills related to regulated environments
• Ability to build trusted relationships with customers and coach operational teams on safety performance

• Reading and interpreting production schedules, job router cards, blueprints, non-conformance reports, and any other materials that summarize requirements for the grinding of rubber rolls.
• Locating and retrieving rolls to the grinding production area utilizing overhead cranes and various materials handling equipment.
• Preparing the individual rolls for installation in the grinding equipment, utilizing knives to trim back rubber from the rollers prior to installing the rollers into the equipment, cleaning steel surfaces of rollers using hand or mechanical equipment, cleaning steel surfaces of rollers using hand or mechanical equipment, such as die-grinders or sheet abrasive/polishing materials.
• Setting the grinding equipment, installing special grinding wheels or attachments, adjusting and setting tooling on tool posts, installing live-centers, chucks centers, extensions, dogs, etc.
• Aligning the rollers in the equipment to meet all dimensional requirements of job order. This includes adjustment for taper, TIR, roller surface finish, and finish dimensions.
• Measure all required dimensions and understand the relationship of the dimensions to the specific requirements of the job.
• Utilize all inspection and measurement equipment per procedure and instruction, including durometer gauges, pi-tapes, P&J gauges, micrometers, vernier diameter tapes, dial indicators, profilometers, temperature-indicating devices, and others as needed.
• Complete the grinding operation and inspect the finished product to ensure that all requirements are met.
• Complete all necessary paperwork, inspection reports, job router information, and operator sign-off on job.
• Clean all metal and rubber surfaces prior to protective wrapping.
• Unload the grinding equipment safely and without damage or harm to personnel, equipment or finished product.
• Deliver the finished product to a designated storage area or shipping container.
• Safely operate the grinding equipment to produce the desired results and meet the specific job requirement.
• Maintain a clean work environment, floors swept, supplies properly stored, equipment cleaned and well maintained.
• Other duties as assigned by supervisor.
  
  

• Language Skills
• Read, write, and understands English.
• Read mechanical blueprints and interpret technical documents.
• Write legible documentation conforming to prescribed style and format.
• Communicates effectively.
  
  

• Utilize all inspection and measurement equipment per procedure and instruction, including Durometer gauges, Micrometers, Vernier diameter tapes, Dial indicators, Profilometers, temperature-indicating devices, and others as needed.
• Understands/applies basic math, including accurate addition, subtraction, multiplication, and division.
  
  

• Learn and utilize safe operating procedures.
• Strong reasoning ability.
  
  

• Stand, bend, and stooping for extended periods of time.
• Reaches by extending hand(s) or arm(s) in any direction.
• Ability to exert up to 50 pounds of force, and/or up to 25 pounds of force frequently.
• Required ability to use finger and hand dexterity to manipulate objects and lift 50 pounds.
• Vision ability within normal parameters.
• Hearing within normal range.
• Coordination to step over and maneuver around obstacles.
• Demonstrates safe operating habits.
  
  

• High school diploma, GED, or high school equivalency