Ringlets Band Jobs in Usa

• Regular attendance at assigned location; may include the A/Z fabrication facility or other project sites;
• Works on systems that include Heating Hot Water, Chilled Water, Steam, Condensate, Compressed Air, Process Fluids, Chemical, Fuel Oil, Gasses, and other related systems;
• Works with materials that include carbon steel, stainless steel, plastics, fiberglass, copper, (brazed, soft soldered and pro-press);
• Clamp, hold, tack-weld, heat-bend, grind or bolt component parts to obtain required configurations and positions for welding.
• Remove rough spots from work pieces, using portable grinders, hand files, or scrapers.
• Chip or grind off excess weld, slag, or spatter, using hand scrapers or power chippers, portable grinders, or arc-cutting equipment.
• Weld pipe and components in flat, vertical, or overhead positions using open root butt weld, socket weld and/or fillet weld.
• Operate manual or semi-automatic welding equipment to fuse metal segments, using processes such as gas tungsten arc, gas metal arc, flux-cored arc, plasma arc, shielded metal arc, resistance welding, and submerged arc welding.
• Recognize, set up, and operate hand and power tools common to the welding trade, such as shielded metal arc and gas metal arc welding equipment.
• Ignite torches or start power supplies and strike arcs by touching electrodes to metals being welded, completing electrical circuits.
• Examine work pieces for defects and measures work pieces with straightedges or templates to ensure conformance with specifications.
• Prepare all material surfaces to be welded, ensuring that there is no loose or thick scale, slag, rust, moisture, grease, or other foreignmatter.
• Monitor the fitting, burning, and welding processes to avoid overheating of parts or warping, shrinking, distortion, or expansion of material.
• Select and install torches, torch tips, filler rods, and flux, according to welding chart specifications or types and thicknesses of metals.
• Fill holes, and increase the size of metal parts.
• Detect faulty operation of equipment or defective materials and notify supervisors.
• Determine required equipment and welding methods, applying knowledge of metallurgy, geometry, and welding techniques.
• Connect and turn regulator valves to activate and adjust gas flow and pressure so that desired flames are obtained.
• Lay out, position, align, and secure parts and assemblies prior to assembly, using straightedges, combination squares, calipers, and rulers.
• Repair products by dismantling, straightening, reshaping, and reassembling parts, using cutting torches, straightening presses, and hand tools.
• Clean or degrease parts, using wire brushes, portable grinders, or chemical baths.
• Mark or tag material with proper job number, piece marks, and other identifying marks as required.
• Position and secure work pieces, using hoists, cranes, wire, and banding machines or hand tools.
• Analyze engineering drawings, blueprints, specifications, sketches, work orders, and material safety data sheets to plan layout, assembly, and welding operations.
• Dismantle metal assemblies or cut scrap metal, using thermal-cutting equipment such as flame-cutting torches or plasma-arc equipment.
• Preheat work pieces prior to welding or bending, using torches or heating furnaces.
• Hammer out bulges or bends in metal work pieces.
• Develop templates and models for welding projects, using mathematical calculations based on blueprint information.
• Check grooves, angles, or gap allowances, using micrometers, calipers, and precision measuring instruments.
• Cut, contour, and bevel metal plates and structural shapes to dimensions as specified by blueprints, layouts, work orders, and templates, using powered saws, hand shears, or chipping knives.
• Estimate consumable materials needed for production and manufacturing and maintain required stocks of materials.
• Set up and use ladders and scaffolding as necessary to complete work.
• Use fire suppression methods in industrial emergencies.
• Detect faulty operation of equipment or defective materials and notify supervisors;
• Direct helpers or apprentices in appropriate tasks;
• Must maintain strict adherence to safety rules and quality;
• Participate in site housekeeping;
• Interact with co-workers in an attentive courteous manner;
• Additional duties as directed by management.
  

• Ability to work independently or as part of a team;
• Experience: 5 years of Field Experience, trade school or apprenticeship;
• Knowledge of materials, methods and tools involved in industrial construction;
• Attention to detail;
• Ability to keep hand and arm steady;
• Be highly focused on customer satisfaction expectations;
• Good documentation and record keeping;
• Preparation of miscellaneous paperwork including time sheets, daily reports and material requests;
• Competency in Permit Required Confined Space;
• Understanding of and strict adherence to daily Job Hazard Analysis (JHA);
• Appropriate state certification or license;
• OSHA 10 certification.
  

• Industrial manufacturing facilities Power generating facilities
• Chemical manufacturing Healthcare & Institutional
• Pharmaceutical facilities including GMP - Aseptic and non-Aseptic Areas and Non GMP Areas Commercial and offices spaces
  

If our name sounds familiar, theres a reason why. Were the people behind the iconic Koozie Can Kooler and more! As one of the largest suppliers in the promotional products industry, youve probably seen our work everywhere from your local bank to a large concert or sporting event. We imprint company logos and slogans on everything from pens to coffee tumblers, lunch bags, tech accessories, camp chairs, and award-winning calendars, to name just a few. Our desire to benefit our people, customers, communities, and industry is behind all that we do. We call it Keep It. Give It., and it ensures that we are leaving a positive, lasting impact with the products and solutions we deliver.

Were looking for the right person to fill this role. Read on if you want to know more and discover how we like to keep the good going!

Great reasons to join Koozie Group:

• People-first culture
• Great shift differential (2nd shift: $1.25/hour / 3rd shift and weekend shifts: $1.75/hour)
• We will train for all positions!
• Climate-controlled environment (clean and heat/air-conditioning)
• Great benefits, including:
  • Medical HSA and HRA plans
  • Flex spending accounts
  • PPO dental
  • VSP vision
  • Employee assistance program
  • Employer-paid life insurance
  • 401(k) with employer match
• PTO - Paid Time Off (vacation, sick, personal)

Pay - 18.50

Schedule - 8 Hour Rotate

Sunday- (6PM - 2AM)

Monday - Thursday (2PM - 10PM)

Monday - Thursday (6AM - 2PM)

Job Summary: Under general supervision sets up, adjusts, and operates Sticky Note cutter equipment and packs the product for shipment or storage.

Essential Job Functions:

• Sets up machine and operates it according to Work Instructions and operator manual. Identifies when mechanical problems occur.
• Performs operator-level maintenance duties on all equipment (daily, weekly, monthly, yearly) and maintains documentation of maintenance.
• Lifts up to 45-pound boxes frequently. Team lift at higher weights.
• Accurately reports and records daily production and scrap.
• Achieves make-ready and run times.
• Communicates to Supervisor and/or MFG Facilitator to address any work area concerns.
• Works rotating shifts and overtime as scheduled and/or required to meet business timelines.
• Follows all Safety and Quality protocols and adheres to ISO 9001; 14001, 6S standards and Lean processes.
• Maintains an effective working relationship and communication with fellow employees, including temporary associates, by adhering to Koozie Groups policies in all activities and through promoting Koozie Group's Vision and Values and Respect in the Workplace.
• Visually inspects product to complete required quality checks
• Reach, bend, twist, push, pull, grasp and stand for extended periods of time as well as freely move about the facility as needed for the position.
• Reads and follows all Job Traveler order directions.
• Reports time accurately.
• Supports teamwork and process improvements through active participation in meetings and helping team ideas work.

Additional Responsibilities:

• To undertake such other duties as may be reasonably expected.
• Wraps, bands, tags and/or moves skids of product.
• Items cut, packed and shipped on time and correctly.
• Maintains and/or improves line balance.

Education: High School Diploma or GED Equivalent.

Job Skills:

• Organizational and communication skills.
• Reading, writing, and math skills.
• Mechanical skills preferred.

Job Experience:

• Knowledge of quality methods and techniques preferred.
• Previous work as a machine operator in a production and/or manufacturing environment is preferred.

Our customers come from all walks of life and so do we. We hire great people from a wide variety of backgrounds, not just because it's the right thing to do but because it makes our company stronger. If you share our values and our enthusiasm to keep the good going, you will find your way at Koozie Group.

Koozie Group is proud to be an Equal Opportunity Employer. We do not discriminate against any applicant or employee based on race, age, sex (including pregnancy, childbirth, or related medical conditions), gender, marital status, national origin, ancestry, citizenship status, mental or physical disability, religion, creed, color, sexual orientation, gender identity or including transgender status), veteran status, genetic information, or any other characteristic protected by applicable federal, state, or local law. Koozie Group also prohibits harassment of applicants and employees based on any of these protected categories.

In compliance with the Americans with Disabilities Act, Koozie Group will provide reasonable accommodations to qualified individuals with disabilities and encourages both prospective and current employees to discuss potential accommodations with the employer.

Compensation details: 18.5-18.5 Hourly Wage

PIc8a6feb1064a-26289-39663265

We are living our Purpose - To Care Deeply about People, Helping them to Eat Well and Be Happy. This Purpose guides everything we do and is why we are in business. We are using our service priorities - Safety, Friendliness, Presentation, and Efficiency to help us make decisions at work every day and are critical to the success of our business goals.

Job Summary: To deliver a great customer experience while working in the Meat Department; to maintain a visually appealing department and to perform other tasks as required in an efficient and safe manner within Company policy. To cut meat and prepare related products in the variety, size, quality and trim prescribed by company and department standards; to communicate and courteously assist customers with the selection of meat items.

Minimum Required Qualifications: The minimum required qualifications for of this position include, but are not limited to the following:

• Ability to proficiently read, write, speak, analyze, interpret, and understand the English language.
• Ability to perform basic math.
• Must possess a strong knowledge of safe food handling and demonstrate safe work habits.
• Ability to stand, bend, twist, reach, push, pull and regularly lift 35 lbs., and occasionally lift 80-90 lbs.
• Ability to work in varying temperatures.
• Ability to work with fresh, dried and/or processed products, spices and powdered substances without negative allergic consequences.
• Ability to tolerate dust and cleaning agents during routine housekeeping duties.
• Ability to operate Meat Department equipment such as band saws, grinders, wrapping machines, power jacks, knives and cutters.
• Ability to stand/walk for the duration of a scheduled shift.
• Ability to interact with Customers in a friendly and helpful way.
• Ability to work cooperatively with others.
• Ability to work all assigned work schedules and comply with all time and attendance policies.

Essential Job Functions: Performance of the essential functions of this position require the Associate to possess the minimum qualifications listed above. These functions include, but are not limited to, the following:

• Maintain a clean, neat, organized and safe work environment.
• Maintain sanitation control according to Company policy.
• Clean and sanitize all work surfaces, utensils and equipment in accordance with Department of Sanitation and QA standards.
• Keep floor clear of debris and spills.
• Work in an environment that includes continuous duties in refrigerated cutting rooms and storage areas (relatively high humidity) with occasional duties in frozen food storage boxes maintained at temperatures as low as 20 degrees (Fahrenheit) below zero.
• Follow approved procedures for receiving, code dating, preparing, storing, and price marking, arranging, and restocking products to ensure quality, accuracy and product rotation and protection.
• Handle damaged and spoiled products according to Company policy and assist in controlling the level of damaged goods.
• Check refrigeration equipment for proper performance regularly; report any failure immediately.
• Unload trucks and transport merchandise to Meat Department that weights 35 lbs. and that occasionally weights 80-90 lbs.
• Regularly lift, pull, push and rotate merchandise that weights 35 lbs. and that occasionally weights 80-90 lbs.
• Understand and adhere to all Country of Origin Label (C.O.O.L.) regulations for all products in the Meat Department.
• Understand and adhere to Company shrink guidelines as relates to Meat Department operations.
• Utilize and maintain equipment as required by department; report any equipment problems immediately.
• Complete all applicable department training programs.
• Checks products received against invoices.
• Check prices and be knowledgeable about location of items in the store.
• Promote for sale any current charitable promotions to Customers.
• Stand at work station for duration of scheduled shift, which may exceed 8 hours per day.
• Cut and trim meat according to Company specifications.
• Rotates products in meat cases.
• Removes outdated or damaged product from meat cases.
• Fills in meat cases when required.
• Removes trash to designated area.
• Push/pull 4-wheel equipment loaded with product.
• Unload trucks.
• Perform all duties in accordance with Local, State and Federal regulations pertaining to the Meat operation.
• Perform all duties in accordance with Company rules, policies, safety requirements, and security standard and all Local, State and Federal health and civil code regulations.
• Dress and groom according to Company policy including uniform, name badge and hat or hair restraint requirements.
• Perform duties in accordance with QA handwashing standards and use disposable gloves when handling food.
• Complete all applicable department training programs.
• Perform all duties in accordance with all ShopRite Service Priorities (Safety, Friendliness, Presentation, and Efficiency).
• Maintain punctual and regular attendance.
• Work overtime as assigned.
• Work cooperatively with others.
• Must be 18 years or older to operate balers, hi-lo's, power jacks, and slicing machines.
• Perform other duties as assigned.

Important Disclaimer Notice: The above statements are only intended to represent the essential job functions and general nature of the work being performed and are not exhaustive of the tasks that an Associate may be required to perform. The employer reserves the right to revise this job description at any time and to require Associates to perform other tasks as circumstances or conditions of its business, competitive considerations, or the work environment change. This job description is not a guarantee of employment.

Reading pick tickets and accurately pull stock for packing finished goods and other materials for shipment to customers, vendors, etc.

Making boxes, filling boxes with product and needed filler, sealing boxes, and recording quantities and weights on Bill of Lading and/or pick tickets.

Transporting packed orders to shipping area.

Using special shipping materials when needed such as pallets, banding, shrink wrapping, and the like to ensure product will arrive to customer in proper condition.

Maintaining knowledge of products, models, and SKU numbers.

Maintaining knowledge of shipping options and vendors and using that knowledge in the company's best interest.

Using parcel packaging when shipping equipment.

Receiving incoming freight in the form of parts, products, and raw materials.

Matching packing list to items received to assure correct quantity and specifications.

Inspecting incoming freight for damage in shipping and handling and notifying the Shipping Manager of damage if any has occurred.

Signing the Bill of Loading for incoming freight.

Completing receiver forms and submitting a copy to accounting and purchasing.

Safely using a forklift or a hand truck to move materials from the receiving area to the stock room.

Safely transporting products from the inspections area and place them on the proper storage rack or other designated areas.

Alerting the Shipping Manager to any problems creating shipping delays, including but not limited to supply needs, and assisting towards a resolution in order to keep shipments current and maintain schedules.

Preparing stencils and instructions for shipments.

Accurately checking products to be shipped against shipping orders to ensure the proper amounts and correct items are shipped.

Maintaining all necessary clerical records pertinent to the function.

Hand-counting and weighing items accurately as needed.

Assisting in loading and unloading of trucks.

Repairing, as able, any machine malfunction and report malfunction to the Shipping Manager and/or Production Manager.

Requesting quotes for overseas shipments from various shipping sources, such as UPS, FedEx, DHL, etc.

Maintaining expert knowledge of the equipment used in the shipping area.

Perform errands (such as transporting items to post office, UPS, etc.) in a motor vehicle if required.

Use a computer to ship orders.

Maintaining knowledge of Material Safety Data Sheets (MSDS).

Other duties as assigned by the Shipping Manager or Production Manager.

High School diploma or equivalent required.

2-3 years of shipping experience required.

Demonstrated leadership abilities.

Basic math skills including addition, subtraction, multiplication, and division.

Basic computer skills to effectively use various shipping programs.

Good oral and written communication skills.

Ability to follow multiple directions, involving sequential tasks or otherwise, and to effectively prioritize tasks.

Ability to effectively delegate responsibility and to follow up on delegation with team members.

Ability to take the initiative and make prompt, sound decisions.

Ability to interface effectively and cooperatively with multiple departments.

Ability to commute to work.

Will be required to obtain forklift certification to operate forklift within the production facility.

Forklift or hand truck

Calculator

Shears

Razor knives and box cutters

Various machines, power and hand tools

Measuring tape

Manufacturing facility.

Primary work area is the shipping department and truck dock area.

Climate controlled environment.

Attire must meet requirements as set forth in the General Safety Guidelines.

Ability to lift up to 30 lbs. on a regular basis and 60 lbs. occasionally.

Ability to pick, pinch, hold, turn, grip, grasp, feel and work with both hands, arms or shoulders on a daily basis.

Use of fingers, hands, arms, legs and feet to accomplish tasks.

Able to lift, push, pull, sit, walk, and stand as needed;

Ability to carry, lift, push, pull, step, climb, reach with hands and arms; bend, stoop and kneel.

Ability to stand or sit for long periods of time on a regular basis.

Ability to move quickly around in all areas of the facility.

High energy level appropriate to fast-paced environment.

Ability to work with glues, oils, and cleaners (and possibly other chemical substances).

Adequate vision to accomplish tasks listed in this job description, including ability to identify and distinguish colors and high level of detail.

Adequate hearing to understand directions.

Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws.

• Valid CDL-A license with a clean driving record
• Minimum 3 months of OTR/commercial driving experience
• Clean MVR for the past 3 years (Incidents reviewed on a case-by-case basis)
• Must be 21 years of age or older
• Stable employment history with verifiable references

• Medical, Dental & Vision Plans - Competitive options for individuals and families
• 401(k) and/or IRA Plans - Secure your future with company-supported retirement savings
• Life Insurance: Basic, Voluntary, and AD&D (Accidental Death & Dismemberment)
• Disability Coverage: Short-Term & Long-Term options available
• Vacation Days, Sick Leave & Paid Holidays
• Ongoing Training & Development Programs
• Access to Wellness Resources

• New, well-maintained trucks
• 100% No-Touch Freight
• All Drop & Hook
• No New York routes
• Assigned trucks - no slip seating
• Paid weekly

• 0-100 miles: $35/load
• 101-400 miles: $25/load (loaded, non-relayed only)

• Quarterly CSA Safety Bonus: Up to $875 (with Hazmat)
• Quarterly On-Road Safety Bonus: $600
• Annual Anniversary Bonus: $100 per year of service
• Referral Bonus Program
• Safety-Based Pay Raises: At mileage milestones

• Detention Pay: Starts after 1 hour
• Hazmat Premium Pay: (Less than 2% of freight)

• 
  
• Plan, set-up, prepare and perform fabrication, assembly, test and associated precision fabrication processes.
  
• Plan, set-up and operate a variety of tools and equipment such as power presses, band saws, belt sanders, expanders, and power shears to cut, form, trim, fit, roll, bend, drill and saw material to fabricate detail parts following established methods and procedures.
  
• Plan, set-up, and perform resistance spot welding and salt braze processes.
  
• Operate a variety of conventional and CNC/NC equipment to perform milling, drilling and turning operations to established methods and procedures.
  
• Plan, set-up, edit programs, and operate various presses and lasers to cut and form details.
  
• Plan, set-up, and perform pressure, leakage and functional tests.
  
• Plan, set-up and operate furnaces for processes such as drying, annealing, aging and curing product.
  
• Receive, unload, check, record, prepare, inventory, store, disburse, and deliver a variety of materials, products and equipment.
  
• Maintain rough stores, cribs, gage cabinets, and point of use storage areas. Order, organize, and store such items as supplies, materials, chemicals and tools.
  
• Safety wire, prepare product, make and apply nameplates and package for shipment.
  
• Fabricate and repair containers.
  
• Participate in review, analysis and ordering of purchased parts and materials to ensure appropriate inventory levels. Communicate with suppliers on delivery and quality concerns.
  
• Review open purchasing and shop part requirements. Review regularly with internal suppliers and purchasing. Coordinate and expedite deliveries as required.
  
• Perform visual, dimensional and functional inspection using variable measuring instruments such as micrometers, verniers and checking fixtures.
  
• Mix and apply bonding agents, coatings and chemicals.
  
• Check calibration of gages, instruments and equipment in accordance with established procedures. Record and document as required.
  
• Prepare test pieces and micros using equipment such as grinders, cutters, sanders, polishers and mounting presses.
  
• Sharpen or modify tools, make up simple forming dies, tooling and templates.
  
• Perform periodic maintenance such as cleaning and lubricating fixtures and equipment, adding fluids, charging filters and tightening hardware.
  
• Participate in audits of processes, procedure and work areas.
  
• Use computers and office equipment to record and process transactions.
  
• Utilize and maintain all necessary documentation such as logs, reports, charts, sampling plans, statistical process control records and nonconformance documents.
  
• Instruct one or two fellow employees in proper performance of duties.
  
• Utilize statistical methods to monitor process control and capability. Use data to investigate areas for potential process improvement.
  
• Improve processes and solve problems in cooperation with fellow employees and technical support.
  
• Move parts and materials to designated locations in accordance with material flow procedures, and initiate follow-up lists.
  
• Keep equipment and surroundings neat, clean and organized.
  
• Perform related duties as required within the scope of this job function.
  
• 3rd Shift: 12am to 7am, Monday to Friday.
  
• Training may take place on 1st, 2nd Shift, or 3rd Shift for up to 3 months.
  

• 
  
• Must have a high school diploma or GED.
  
• 1-2 years of experience in quality control and inspection processes.
  
• Prior use of air tools and fixtures to set-up parts for welding and understanding of location gages such vernier calipers and depth micrometers.
  

• 
  
• Sheet metal working skills such as grinding, bending, cut-off tools, polishing, deburring.
  
• Experience completing pressure test, assembly of Heli coils, riveting, and spot welding.
  
• 5-7 years of relevant experience in quality control and inspection processes.
  
• Familiarity with statistical process control (SPC) and other quality assurance methodologies.
  
• Experience with the use of precision measuring instruments and inspection equipment.
  

• 
  
• Medical, dental, and vision insurance
  
• Generous 401(k) plan that includes employer matching funds
  
• Collins provides eligible employees with paid time off
  
• Tuition reimbursement program
  
• Student Loan Repayment Program
  
• Life insurance and disability coverage
  
• Optional coverages you can buy: pet insurance, home and auto insurance, additional life and accident insurance, critical illness insurance, group legal, ID theft protection
  
• Birth, adoption, parental leave benefits
  
• Ovia Health, fertility, and family planning
  
• Adoption Assistance
  
• Autism Benefit
  
• Employee Assistance Plan, including up to 10 free counseling sessions
  
• Healthy You Incentives, wellness rewards program
  
• Doctor on Demand, virtual doctor visits
  
• Bright Horizons, child and elder care services
  
• Teladoc Medical Experts, second opinion program
  
• And more!
  

The Kitchen Tech 1 position is responsible for assisting in the kitchen where the company produces edible marijuana products. This entry level position is focused on assisting the lead(s), supervisor, and manager in the direct operation of kitchen equipment and creation of Marijuana Edibles. Level 1 Kitchen Techs are expected to follow company processes in a safe and timely manner. The schedule is Mon-Fri, 7 am-4 pm.

Essential Duties and Responsibilities:

• Carries out tasks accurately and strictly following SOPs including but not limited to:
• General Housekeeping (dish, mop, sweep, surface cleaning, dusting, trash disposal)
• Sugaring Gummies (running sugar tumbler, sorting, quality control checks)
• Demolding Gummies
• Depositing Gummies (set up/break down, depositing, swapping pistons, changing O-rings, troubleshooting, stirring)
• Receiving Orders (stocking, FIFO, inventory checks)
• Packaging Gummies (hand packing, counting, check-weigh, band sealing)
• Follows and ensures strict safety procedures and safety checks.
• Flexibility to help in other GDF departments when needed.
• Operates kitchen machinery, follows strict safety protocols set forth by the company.
• Follows cleaning schedule/regimen.
• Ensures all workspaces are well-stocked and resourced.
• Maintains kitchen small wares by picking-up, cleaning, washing, and distributing.
• Keeps kitchen equipment operating by following operating instructions; troubleshooting breakdowns; maintaining supplies; performing preventive maintenance; informing supervisors of the need for repairs.
• Uses effective forms of communication to address and handle situations.
• Other duties as assigned.

Minimum Qualifications:

• Must be able to obtain a state medical marijuana badge and pass a background check
• Must be able to communicate with GDF Team effectively and professionally.
• Must perform under high pressure situations.
• Ability to work in a fast-paced environment and handle high stress situations
• Self-Motivated
• Ability to multitask
• Excellent organizational skills
• Ability to stay focused
• Positive attitude and strong work ethic. Must be a team player with a can do attitude
• Available to work weekends and holidays as needed
• Must have reliable transportation

Education & Experience Requirements:

• High school diploma or equivalent
• 1 year of experience in a regulated field that adheres to health and safety policies and procedures preferred

Physical Requirements:

• Must be able to lift and carry up to 50 pounds.
• The ability to respond quickly to sounds
• The ability to move safely over uneven terrain or in confined spaces
• The ability to see and respond to dangerous situations
• The ability to wear personal protective gear correctly most of the day
• The ability to sit or stand for up to 12 hours at a time
• The ability to work in bright/hot/humid conditions
• The ability to work in low light situations
• Lifting, standing, sitting, walking, bending, reaching, push/pull, repetitive use of hands, grasping use of hands, visual activity
• Exposure to limited hazardous chemicals

• Works as assigned by the Barge Foreman to ensure the successful completion of on-going or new marine construction projects.
• Assists in unloading and assembling of crane or other hoisting equipment to be used in marine construction activities.
• Utilizes basic skills as a hook operator in swinging rig, raising and lowering crane boom, raising and lowering load lines on the crane.
• Operates a hydraulic rubber tire or track crane equipped with a multiple part pick-up or single line hoist suspended from a boom by a cable.
• Maneuvers and positions loads over designated areas in a smooth, safe manner.
• Moves hand levers and depresses pedals to rotate chassis over lift load points.
• Utilizes load charts to determine load and radius capabilities of the crane.
• Assists in the installation of boom and hoisting cables on the hoisting equipment.
• Performs maintenance duties such as cleaning, greasing, oiling, and fueling of assigned equipment.
• Performs daily safety inspection of crane and recognizes possible problem areas such as worn cables, worn bands on hoisting mechanisms, broken gears, housing, etc.
• Ensures that crane boom is properly secured upon the work barge prior to moving from one work location to another and otherwise demonstrates safe work practices in all aspects of crane operation.
• Works closely with Barge Foreman, Welders, Helpers, Laborers, and other skilled craft persons to complete current projects in a safe, efficient, and timely manner.
• Participates in Safety and Environmental initiatives that will contribute to compliance with State/Federal regulations and improve existing Company programs.

• Responsible and accountable for incumbent's own personal safety.
• Responsible and accountable for the safety of all co-workers and any others incumbent comes in contact with.
• Authorized and obligated to stop work on any task or series of tasks whenever an unsafe condition or situation is anticipated or is observed.
• Complies with all applicable laws, regulations, and Company policies and procedures and is subject to appropriate disciplinary action (including dismissal) for failure to do so.
• Reports any and all violations of applicable laws, regulations, or Company policies and procedures promptly and is subject to appropriate disciplinary action (including dismissal) for failure to do so.
• Performs other related administrative and technical duties as may be assigned or requested by immediate supervision (such as certification training, safety training, procedure review, etc.).
• All employees, current and former, must maintain confidentiality by not disclosing to others any confidential, proprietary, or trade secret information belonging to the Company.

• Understand the basic functions and operations of various types of pile hammers -- diesel, air, hydraulic, and drop hammers.
• Be able to read, understand, and use crane load charts to determine load and radius capabilities of cranes.
• Have general knowledge of construction rigging -- use of slings, cable chokers, spreader bars, multi-part load blocks, etc.
• Be capable of successfully passing a crane operations certification test.

• Walking, stepping, climbing, or otherwise moving from one location on the job site to another, which normally involves physically getting onto and off of work barges, boats, vessels, or dock facilities of varying heights and access parameters.
• Visually seeing crane operations well (either naturally or with corrective lenses).
• Standing, stooping, kneeling, squatting, climbing, or sitting for long periods of time.
• Performing repetitive movements by feet, shoulders, arms, wrists, hands, and back in performance of work.
• Climbing vertical ladders to heights of 40'-50'.
• Working in confined spaces and at elevated heights.
• Lifting objects up to 50 lbs. as required.
• Carrying objects up to 50 lbs. as required.
• Adapting to extreme temperature changes.
• Adapting to outdoor conditions and prolonged exposure.
• Remaining calm during emergencies and responding appropriately as dictated by the circumstance of the incident.

• Medical, including Prescription Drugs
• Dental
• Vision
• Life and AD&D Insurance
• Short Term and Long-term Disability Insurance
• Employee Assistance Plan
• 401(k) Retirement Plan
• Paid Time Off for Vacation, Sick, Holidays, Jury Duty and Bereavement Leave
• Pre-Tax Health and Dependent Care Flexible Spending Accounts
• Career Growth & Development