Ricaurte Precision Inc Jobs in Usa

• Articulate and promote customer benefits of technology and value that Murphy Technology Solutions provides customers.
• Have a clear understanding of grade control activities and applications that take place on customer job sites.
• Install, calibrate, and prepare machine control systems and verify optimal performance prior to machine delivery.
• Support and diagnose customer issues with machine control systems or jobsite grade management and perform repairs. 
• Set-up base and rovers and localize jobsites as needed.
• Support Precision Construction Sales Specialists with technical questions
• Deliver customer and internal training for machine control and grade management.
• Maintain technology and industry knowledge and expertise.
• Maintain inventory of grade control systems, components, and tools.
• Collaborate with our team on new products and continuous improvement opportunities.
• Keep up to date on competitive offerings and differences.

• Assist with other duties assigned and directed by corporate management within the framework of Murphy Tractor and Equipment Company, Inc.’s objectives.

• Able to communicate effectively and professionally.
• Strong focus on customer service.
• Strong knowledge of Grade Control Solutions and construction equipment technology.
• Good skills in operating vehicles and equipment used for demonstration purposes.
• Able to maintain a standard operating Driver’s License.
• Strong attention to detail.
• Able to work effectively in a team environment.
• Self-Motivated
• Able to meet commitments and deadlines.
• Able to complete required documentation and reports in a timely manner.
• Able to perform multiple tasks simultaneously.
• Able to work a flexible schedule as needed.

·        Able to organize and prioritize numerous tasks and complete within time constraints.

·        Demonstrates openness to new procedures, technology and structure.

Employee must be able to do occasional lifting of up to 60 lbs., crawl and climb on/under heavy equipment, walk over construction/excavation sites (irregular terrain), stoop, bend, kneel, twist and stand for extended periods of time. Employee must be able to operate a motor vehicle day and night and will be asked to travel long distances with some nights out (estimated 50% travel).

·        Prior Sales, Service, or Vocation/Technical degree and/or equivalent work experience or training in grade control is preferred.

·        Candidates must have valid work authorization and be able to work in the U.S. without company sponsorship.

Murphy Tractor & Equipment Co., Inc. is an Equal Opportunity Employer.

Looking for a career with a great company? We have opportunities available in Liverpool, NY for Truck Drivers and Warehouse Associates.

Attend our hiring event where well provide you with information about our team and the open positions below.

Our leadership team looks forward to meeting you!

When: October 12th, 10am - 5pm

Where: 4560 Morgan Place

Liverpool, New York 60;13090

What we offer:

Competitive pay

Comprehensive benefit plan (medical, dental, vision, short/long term disability, life insurance and more)

Retirement benefits

Paid time off (vacation, holidays, PTO and sick)

Employee Discount Programs

Paid training

Opportunities for growth and career advancement

We have the following positions available:

Class A or B CDL Truck Driver (Home Nightly) - $21.00/hr with a $5,000 Sign-on Bonus ($3,000 payable at 90 days and $2,000 at 1 year).

- Responsible for safely and efficiently operating a vehicle to deliver hardgoods, compressed cylinders, and associated products.

Cylinder Processor (Warehouse Associate) - $20.00/hr

- Responsible for performing duties associated with filling, labeling & preparing low pressure packaged gas cylinders and maintaining the cryogenic liquid filling system.

Praxair Distribution, Inc., a Linde Company, Praxair Distribution, Inc. is the worlds largest industrial gas company. We take pride in making our plant more productive with products, services and technologies that include high-performance surface coatings as well as specialty, medical, and process gases. For more information, please visit us at the job fair or at 60; qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, disability, protected veteran status, pregnancy, sexual orientation, gender identity or expression, or any other reason prohibited by applicable law.

About Us:

Boston Micro Fabrication (BMF) is a leading provider of micro-precision 3D printing systems and services. We are at the forefront of advanced manufacturing technology, enabling our clients to create high-precision, complex, and microscale parts and products. Our innovative technology is transforming industries such as electronics, medical, microfluidics, and more.

Job Description:

BMF is seeking a highly motivated and experienced Precision Manufacturing Engineering Lead to join and guide our growing team. In this leadership role, you will oversee and mentor a team of engineers and technicians, driving excellence across our precision additive manufacturing operations and customer applications.

This is a hands-on leadership position where you will not only direct and develop the team but also work directly with BMF’s precision additive manufacturing systems. You’ll be actively engaged in running, maintaining, and optimizing the printers, including those configured for ceramic materials, to ensure process consistency, quality, and efficiency across all production activities.

You will play a key role in advancing our applications expertise, pushing the boundaries of ceramic and polymer 3D printing materials, and ensuring that all production and application development efforts meet the rigorous standards required for a precision manufacturing environment. This position combines hands-on technical execution, materials understanding, strategic leadership, and cross-functional collaboration to ensure consistent, high-quality, and compliant results.

As the Precision Manufacturing Engineering Lead, you will:

• Hands-On Production & Workflow Management: Actively operate, maintain, and optimize BMF’s 3D printer fleet at the Maynard, MA facility—including systems dedicated to ceramic and other advanced materials. Manage daily print operations, production scheduling, and throughput while ensuring quality control, compliance with applicable standards and regulations, and adherence to precision manufacturing practices. Lead by example through hands-on engagement in production activities. Develop and optimize 3D printing parameters and processes to achieve precise, repeatable, and high-quality outcomes across ceramics, polymers, and composite materials.

• Leadership & Best Practices: Lead and supervise the Applications Engineering team, setting priorities, allocating resources, and fostering a culture of technical excellence, accountability, and continuous improvement. Maintain and enforce best practices essential for a precision manufacturing environment, ensuring all processes, documentation, and production protocols uphold the highest standards of accuracy, repeatability, quality, and compliance with industry standards and regulatory requirements beyond ISO frameworks.

• Materials Integration: Design and execute experiments to evaluate and qualify both internally developed and third-party materials—including ceramic resins and specialty formulations—for use on BMF systems. Drive materials innovation and integration to expand the range of applications and performance capabilities.

• Sales Collaboration: Partner closely with the Sales Team to address unique customer challenges, translating technical insights into practical solutions. Communicate directly with customers to ensure alignment, satisfaction, and long-term success.

• Industry Insights: Stay current on industry trends, emerging technologies, and evolving use cases in precision ceramics and additive manufacturing. Leverage this knowledge to guide strategic direction, ensure compliance with evolving regulations, and maintain BMF’s leadership in micro-precision 3D printing.

Qualifications:

• Hands-on experience printing with ceramic materials and an understanding of their behavior, post-processing requirements, and design considerations.
• Broader materials background with knowledge of polymers, composites, and resin chemistries.
• Exceptional attention to detail.
• Strong technical aptitude and problem-solving skills.
• Experience in setting up, maintaining, and optimizing best practices and workflows in a precision manufacturing environment.
• Proficiency with production planning, quality control methods, and data analysis.
• Excellent communication and interpersonal skills.
• Experience with additive manufacturing (SLA and/or DLP), with a focus on customer and internal applications and materials qualification.
• Understanding of and ability to ensure compliance with quality, safety, and regulatory standards—including but not limited to ISO 9001, ISO 13485, and other applicable industry and customer-specific regulations.
• Demonstrated success in optimizing print parameters for resin and ceramic materials to achieve desired properties for functional end-use parts.
• Proven ability to manage multiple projects simultaneously while maintaining a high level of accuracy and consistency.
• Ability to work independently and as a team leader.
• Proficiency with CAD tools.

Benefits:

• Competitive salary
• Health, dental, and vision insurance
• Retirement savings plan with Company match
• Professional development opportunities
• Collaborative and innovative work environment

At Boston Micro Fabrication, we value diversity and inclusivity. We encourage individuals from all backgrounds and experiences to apply. If you are passionate about cutting-edge technology, excited to work with leading-edge 3D printing systems, and eager to support our customers in achieving their goals, we invite you to apply to join our team.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Test and Evaluation (BT&E) is seeking multiple Machinist Assemblers Precision to join our Machinist departments in either Seattle, WA or Tukwila, WA.

Machinists in this position participate in the design, fabrication and assembly of various production and research projects. Using a variety of precision machines (e.g., lathes, grinders, EDM, CNC and milling machines) to support aircraft engineering and production groups.

Position Responsibilities:

• Perform bench work (e.g., drilling, honing, tapping, reaming) on production and experimental parts, as required
• Assemble parts using rivets and bolts with correct tools such as rivet squeeze, lock bolt puller, rivet gun and bucking bar, power screwdriver, or ratchet per engineering requirements
• Lay-out, plan and sequence machining operation
• Analyze and interpret drawings, sketches, blueprints and verbal instructions to determine work to be performed on detailed precision parts (e.g., aircraft castings, fixtures, tools, shop aids)
• Use shop math, geometry and/or trig to calculate dimensions
• Determine/obtain raw material to be used (e.g., brass, aluminum, steel, composites, and wood) for machining or fabrication per drawing or customer requirements
• Set up operate and adjust all common machine tools (e.g., lathe, mill, bridgeport, electrical discharge machine (EDM), drill press) to accomplish work on precision assemblies
• Select machine to be used in machining process
• Check machine to be used for missing, loose, damaged equipment, check oil and coolant levels and fill, as required
• Write programs as required for multi axis machines
• Adjust machine settings (e.g., speeds and feeds) to correct machining problems or to prepare machine for next operation in sequence
• Perform minor editing of CNC programs per shop requirements
• Select and check cutting tools per program or CNC documents
• Ensure cutters are the correct type, length, diameter, radius, and are in good condition
• Select machine accessories and holding devises (e.g., chucks, vises, turntables)
• Verify that apparatus is in good condition
• Identify fixtures and/or shop aids to be built and fabricate as required using mill, lathe, bandsaw, drill press, sander and grinder
• Attach machine accessories, tools and shop aides using dial indicators, edge finders, wrenches, bolts, clamps, and overhead cranes
• Monitor machine during operation for unusual vibration or sounds, watch machine gauges and controller display or digital readout for warnings, visually check cutter path, clearance and chips to ensure smooth operation
• Check work with precision instruments (e.g., micrometers, dial indicators, height gauges) and ensure parts are free from defects (e.g., finish, dimensions, mismatch, tool marks) and complete per drawing, sketch or verbal instructions
• Assemble, fit, check, test of developmental machine parts and assemblies to customer specification
• Troubleshoot and test precision assemblies with working groups (e.g., engineering, production, inspection, manufacturing resource & development (MRD)) to resolve tooling/production problems
• Handle and dispose of hazardous materials (e.g., coolants, solvents) in approved manner (per Material Safety Data Sheets) using personal protective equipment, as required
• Maintain personal tool certifications, as required
• Ability to use computers and knowledge and ability to use MSWord, Excel, Outlook, etc.
• Must be willing to work variable shifts, including weekends and overtime; some positions may also be rotating shifts

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

This position must meet export control compliance requirements. To meet export control compliance requirements, a "U.S. Person" as defined by 22 C.F.R. §120.15 is required. "U.S. Person" includes U.S. Citizen, lawful permanent resident, refugee, or asylee.

Basic Qualifications (Required Skills/Experience):

• 1+ years of experience with multiple Computer-Aided Design (CAD) and/or Computer-Aided Manufacturing (CAM) applications (e.g. Mastercam, CATIA V5, Unigraphics, etc.)
• 1+ years of experience programing, setting-up and running lathes, grinders, mills, and Computer Numerical Control (CNC) machines
• Experience reading G and M codes

Preferred Qualifications (Desired Skills/Experience):

• Experience with ENOVIA design tool
• Completed training as a journeyman machinist
• Graduated from an Machinist Apprenticeship program or completed a Machining Certificate

Drug Free Workplace :

Boeing is a Drug Free Workplace (DFW) where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Shift:

These positions are for either 1st or 2nd shift; however, there may be additional shift requirements to support program objectives.

Union:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will be considered as this job is not installed in QTTP.

Pay & Benefits:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay is based upon candidate experience and qualifications, as well as market and business considerations.

Summary Pay Range: $33.32/hour to start for new union members, with potential to earn up to $61.01/hour, at max pay

Applications for this position will be accepted until Mar. 21, 2026

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job DescriptionAt Boeing, we innovate and collaborate to make the world a better place.

We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth.

Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for an Electronic Technician
- Precision Machine Tool Maintenance to join our Equipment Services team in various locations across Washington State.As an Electronic Technician specializing in Precision Machine Tool Maintenance, your role will involve the installation, maintenance, and troubleshooting of electronic and electrical systems in precision machine tools, where attention to detail and adherence to safety protocols are paramount.

You will be responsible for diagnosing and resolving issues in complex systems, ensuring that all equipment operates efficiently and meets stringent specifications.

Your commitment to quality will be reflected in your ability to collaborate with various teams, maintain accurate records, and comply with all regulatory requirements.You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meets regulatory compliance and operational excellence.

If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.Position Responsibilities:Install, maintain, troubleshoot, repair, and rework electronic and associated electrical systems of precision machine tools and other manufacturing equipment, ensuring compliance with original equipment manufacturer specifications.Troubleshoot communication protocols to facilitate the transmission and receipt of information between various machine tool and production systems.Utilize open computing architecture to diagnose issues in integrated machine tool and production systems, determining appropriate repair actions.Write and edit programs to support maintenance activities, including alignments and ballbars, using knowledge of high-level programming languages.Develop test programs and loops to troubleshoot equipment movement for repeatability and accuracy.Comply with all Federal, State, and Company regulations while performing duties.Collaborate with other crafts to assist in troubleshooting outside the central control system as needed.Diagnose malfunctions in systems and components, determining corrective actions to restore optimal operating efficiency.Communicate relevant information to succeeding shifts using management-approved methods.Work with lower-classification employees on maintenance, installation, repair, retrofit, modification, calibration, adjustment, and testing of precision machine tools and subsystems.Maintain equipment records, logs, and updates, preparing reports and schedules as required.Plan jobs by coordinating equipment, tools, drawings, and procedures to facilitate job completion.Ensure system configurations comply with FAA and accreditation requirements.Possess working knowledge of software programming languages (e.g., Boolean, ladder, C+, C++) and numbering systems (binary, octal, hexadecimal).Understand electronic theory, computer and networking architecture, microprocessors, and discrete components.Use various computing systems and test equipment (e.g., oscilloscopes, meters, laser interferometers, ballbars) to test and adjust electronic components and systems.Collaborate with Management, Engineering, Equipment Manufacturers, and Vendors to analyze and recommend improvements for facility and equipment design.Maintain and utilize schematics, blueprints, wiring diagrams, technical documents, and applicable specifications and codes.Develop and use electronic, electrical, and electromechanical test equipment and measuring devices as required.Perform tasks associated with other job classifications when necessary to complete assignments.Obtain and maintain applicable licenses, certificates, and certifications.Troubleshoot and maintain electronic control devices, spindle systems, sensors, servo systems, PID loops, transducers, feedback technologies, magnetic devices, and electrostatic discharge systems.Repair digital electronics, serial/parallel bus transmission systems, high-frequency circuitry, analog devices, and printed circuit boards.Physical Demands and Potential Hazards:Perform physical tasks that include lifting weights ranging from 10-15 lbs.

to 15-35 lbs.Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.Work in environments that may involve contact with metals, solvents, and coolants.Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.Adapt to varying noise levels and atmospheric conditions.Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.This position is expected to be 100% onsite.

The selected candidate will be required to work onsite at one of the listed location options.This position must meet Export Control compliance requirements, therefore a "US Person" as defined by 22 C.

F.

R.

§ 120.62 is required.

"US Person" includes US Citizen, lawful permanent resident, refugee, or asyleeResumes of current Puget Sound Boeing employees submitted via "Find Jobs" in Boeing/Workday will be considered as this job is not installed in QTTP (Quality Through Training Program).Basic Qualifications : 3+ years of electronic/electrical experience in any of the following fields: machine tool maintenance, industrial electronic and/or electrical maintenance field, or military electronic/electrical system maintenance.

1+ years' experience troubleshooting programmable logic controllers (PLC) OR Functionally Equivalent Control Systems, such as related fields including military, shipboard, aircraft support, weapons systems, or industrial automation platforms.Ability to work at heights up to 125 feet above ground level and pass Fall Protection Training.Preferred Qualifications:Experience working in manufacturing or industrial setting maintaining and troubleshooting equipment.Experience reading and interpreting drawings, specifications, material processes, schematic and diagrams.Experience working around 3 phase, industrial voltages 480v, 277v, 208v.Ability to work around electromagnetic fields as a result of various types of production equipment.Conflict of Interest: Successful candidates for this position must successfully complete the Company's Conflict of Interest (COI) assessment process.Typical Education & Experience:High school graduate or GED preferred.Relocation: This position offers relocation based on candidate eligibility.Drug Free Workplace:Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.Union Representation Statement:This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.Shift Work Statement : This position is for a variety of shifts .

Working in other shifts and/or overtime varies based on business needs.Total Rewards & Pay Transparency:At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.

Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.Pay : $47.00/hour, with potential to earn up to $62.45/hour in accordance with the terms of the relevant collective bargaining agreement.Applications for this position will be accepted until Mar.

30, 2026Language RequirementsEnglish PreferredRelocationThis position offers relocation based on candidate eligibility.Visa SponsorshipEmployer will not sponsor applicants for employment visa status.ShiftThis position is for variable shiftEqual Opportunity Employer:Boeing is an Equal Opportunity Employer.

Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Precision CNC Machinist

Location: On-site near Chicago, IL and Rockford, IL

Industry: Aerospace & Advanced Manufacturing

Employment Type: Full-Time (Direct Hire)

Compensation: $28.00–$35.00 per hour + 10% 2nd Shift Premium for evening schedule

Benefits: Full suite of benefits including health insurance, 401(k) with company match, paid holidays, PTO, and bonus opportunities.

Shifts Available: (Overtime available, with typical workweeks around 50 hours)

• 1st Shift: 6:00 AM – 4:30 PM
• 2nd Shift: 4:00 PM – 2:30 AM

A rapidly growing aerospace and precision manufacturing company is expanding operations and adding cutting-edge CNC machining capabilities at its facilities in the Chicago and Rockford areas. We’re seeking experienced Precision CNC Machinists to join a team focused on innovation, quality, and craftsmanship in high-specification manufacturing environments.

This role provides the chance to work with the latest multi-axis machining technologies and contribute to mission-critical components in aerospace, defense, and high-performance applications. If you're a setup-proficient machinist with strong attention to detail and experience working with tight tolerances, this opportunity is a strong match.

Key Responsibilities:

• Set up and operate 4- and 5-axis vertical milling machines from raw material through final part.
• Work with aerospace-grade materials including stainless steel, titanium, alloys, and high-performance plastics.
• Read and interpret complex engineering blueprints and GD&T symbols to ensure precision manufacturing standards.
• Modify and manipulate G-Code programs on Fanuc CNC machines.
• Design and adjust fixtures as needed to optimize machining performance.
• Maintain high standards of safety, cleanliness, and quality in a high-tech production environment.

What Sets This Role Apart:

• Be part of a high-growth team adding brand-new, state-of-the-art CNC machines.
• Clean, climate-controlled facility focused on quality, safety, and operator comfort.
• Join a dynamic team that values your expertise and work ethic, where collaboration fuels success
• Clear growth path and long-term stability in a high-demand industry.

What You Bring:

• Familiar with complex CNC milling setups
• Experience in industries like aerospace, defense, or precision manufacturing
• Advanced knowledge of GD&T, blueprint reading, and part inspection.
• Fanuc machine control experience strongly preferred.
• Ability to program or modify G-code and perform first-article inspections.
• Strong troubleshooting, fixture design, and machine optimization skills.

About Blue Signal:

Blue Signal is an award-winning, executive search firm specializing in various specialties. Our recruiters have a proven track record of placing top-tier talent across industry verticals, with deep expertise in numerous professional services. Learn more at /46Gs4yS

Precision Machining Specialist

Location: On-site – Atlanta, GA & Braselton, GA

Schedule: Monday through Friday, 8:00 AM – 4:30 PM

Compensation: $30–$40 per hour (DOE) + Overtime eligibility

A rapidly growing industrial equipment manufacturer with operations in North Georgia is expanding its internal machining capabilities and hiring a skilled Precision Machining Specialist to join their high-performing, hands-on engineering and production team. This role supports custom machinery builds and prototype development for customers in aerospace, energy, automotive, and advanced manufacturing markets.

Key Responsibilities:

• Operate and configure CNC and conventional machining tools to produce high-precision parts for specialized machinery assemblies.
• Program, edit, and optimize CNC toolpaths using CAM software (e.g., Mastercam).
• Interpret engineering drawings, applying GD&T standards to ensure tight-tolerance specifications are met.
• Collaborate closely with engineers to fabricate components for new designs, R&D projects, and machine prototypes.
• Select appropriate tooling, complete machine changeovers, and fine-tune machining parameters to support efficient production and maintain quality standards.
• Help organize and optimize internal machining workflows as the shop scales.
• Conduct inspections to ensure machined parts meet all dimensional and quality standards.
• Conduct routine care and upkeep of machinery and tooling to promote a safe and productive workshop environment.
• Contribute to production schedules by aligning machining work with engineering and build timelines.
• Recognize opportunities to enhance machining methods, tooling strategies, and overall production efficiency.

Equipment You'll Use:

• Haas VF-4 Vertical Machining Center
• Mazak Quick Turn 8 CNC Lathe
• Seiki-XL 24” x 120” Manual Lathe
• Hydro-Mech Horizontal Band Saw

Required Qualifications:

• Hands-on experience with both CNC machining and manual machining equipment.
• Proven experience programming CNC equipment using CAM platforms such as Mastercam.
• Proficiency with GD&T and interpreting technical engineering drawings.
• Background in machining high-precision components for industrial or custom equipment applications.
• Mechanical aptitude, attention to detail, and self-directed problem-solving ability.

Preferred:

• Experience working in custom machine building, prototype development, or engineer-to-order environments.
• Exposure to SolidWorks or similar CAD platforms.
• Familiarity with job shop or high-mix, low-volume manufacturing workflows.
• Prior involvement in setting up or scaling a machining operation.

Why Apply?

• Join a capital equipment manufacturer in high-growth mode with increasing production complexity and machine volume.
• Collaborate daily with a team of passionate engineers and builders on unique machinery builds.
• Work in a casual, blue-collar environment that values initiative and craftsmanship.
• Shape the future of the company’s machining operations with your hands-on input.
• Competitive pay, consistent day-shift schedule, and opportunities for overtime.

If you're looking to step into a role where your ideas, mechanical skill, and machining expertise directly impact innovative equipment builds, we want to connect with you. Apply today to learn more about this opportunity.

About Blue Signal:

Blue Signal is an award-winning, executive search firm specializing in various specialties. Our recruiters have a proven track record of placing top-tier talent across industry verticals, with deep expertise in numerous professional services. Learn more at /46Gs4yS

Bundy Baking Solutions is the world's leading manufacturer of baking equipment custom and stock baking pans and pan coatings. Built with extensive hands-on knowledge of the baking industry and its operations, Bundy has a legendary reputation for both quality and innovation.

• Studies sample parts, blueprints, drawings, and engineering information to determine methods and sequence of operations to fabricate product
• Operates metalworking machine tools, such as lathe, milling machine, drill, or grinder to machine parts to specifications
• Assembles parts into completed units using jigs, fixtures, hand tools, and power tools
• Fabricates, assembles, and modifies tooling, such as jigs, fixtures, templates, and molds or dies to produce parts and assemblies
• Verifies dimensions of parts, using precision measuring and marking instruments and knowledge of trigonometry within .0005
• Calculates and sets controls to regulate machining, or enters commands to retrieve, input, or edit computerized machine control media
• Selects, aligns, and secures holding fixtures, cutting tools, attachments, accessories, and materials onto machines
• Measures, examines, and tests completed units to detect defects and ensure conformance to specifications
• Dismantles machines, dies, or equipment, using hand tools and power tools, to examine parts for defect or to remove defective parts
• Cleans, lubricates, and maintains machines, tools, and equipment to remove grease, rust, stains, and foreign matter
• Confers with engineering, supervisory, and manufacturing personnel to exchange technical information
• Designs fixtures, tooling, and experimental parts to meet special engineering needs

• Knowledge of various machines such as cutting tools, lathes, milling machine, shaper, grinder
• Knowledge of powered tools
• Ability to read blueprints
• Ability to measure, mark and organize metal stock for machining
• The ability to exert maximum muscle force to lift, push, pull, or carry objects weighing 50 pounds
• The ability to choose quickly and correctly between two or more movements in response to two or more signals (lights, sounds, pictures, etc.). It includes the speed with which the correct response is started with the hand, foot, or other body parts
• The ability to quickly respond (with the hand, finger, or foot) to one signal (sound, light, picture, etc.) when it appears
• The ability to time the adjustments of a movement or equipment control in anticipation of changes in the speed and/or direction of a continuously moving object or scene
• The ability to communicate information and ideas in writing so others will understand
• The ability to remember information such as words, numbers, pictures, and procedures
• The ability to quickly and repeatedly bend, stretch, twist, or reach out with the body, arms, and/or legs

PIbefd11991366-26289-39921649

TekPro is partnered with a precision machining manufacturer in the Chicago area that is looking to add a Process Engineer to their team. Our client offers modern CNC equipment, a clean and organized facility, and the opportunity to work on complex precision machined components.

This role is ideal for someone with experience in a precision machining environment who enjoys developing manufacturing processes, working with engineering and production teams, and supporting the launch of new parts into production.

Key responsibilities include:

• Developing detailed manufacturing process plans for new parts using SolidWorks for modeling and drafting and Visual Manufacturing (ERP) for documentation
• Reviewing customer purchase orders, drawings, and specifications to ensure all requirements are incorporated into the manufacturing process plan
• Ensuring manufacturing process plans comply with all drawing, purchase order, and specification requirements
• Reviewing existing tooling and gage inventory for use in the manufacturing process
• Designing and ordering new tooling when necessary
• Working closely with manufacturing teams to troubleshoot and resolve production issues as they arise
• Supporting continuous improvement of manufacturing processes and production efficiency

If you have experience in manufacturing engineering or process engineering within a CNC machining environment and are interested, apply now to learn more!

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

The Boeing Missile & Weapon Systems division is seeking a Software Engineering Manager to oversee the Small Diameter Bomb (SDB) software team in St. Charles, MO (St. Louis Metro Area). This Software Manager will lead multiple software teams in the SDB organization, which produces precision-guided weapon systems used by U.S. and allied forces worldwide.

The SDB Software Manager will lead, mentor, and develop a team of software engineers, manage performance in line with Boeing values and behaviors, and foster a culture of innovation, collaboration, and compliance with industry standards and best practices. The role will implement strategic business plans and policies to align teamwork with organizational goals, drive process improvements to boost efficiency and productivity, and manage resource allocation to support software engineering initiatives.

This proactive manager will collaborate with external suppliers, partners, and cross-functional teams to deliver technical solutions that meet customer needs and regulatory requirements, maintain clear communication and strong relationships with customers and stakeholders to ensure alignment on project objectives, and stay current on emerging technologies and industry trends to guide adoption of relevant innovations. The position will also facilitate regular technical reviews and audits, provide oversight and approval of technical approaches, products, and processes, and ensure that the team’s deliverables consistently meet established standards and practices.

Join Us. Protect Our Nation and Partners.

The Precision Strike organization is a strong and growing business that produces world-class software built exceptional software teams developing Operational Flight Software (OFS), mission planning and weapon control software, resident test software, and other real-time embedded and mission-processing software for SDB and related munition systems. Teams develop in languages such as C++, C, Python, and may integrate with C#, Java, and Qt front ends, delivering to target platforms including Linux, VxWorks, and bare-metal embedded targets.

Boeing offers a comprehensive benefits package including substantial Paid Time Off (PTO), flexible work environment, paid parental leave, an Industry Leading 401k matching plan, extremely generous tuition assistance for earning advanced degrees, and paid medical leave programs. For more information, click here.

Position Responsibilities:

• Manage software engineering team through the software development life cycle.

• Develops and maintains relationships and partnerships with peers, business partners, customers, and other stakeholders.

• Oversee software architecture, design, and implementation practices to ensure compliance with Software Engineering Design Practices, safety-critical requirements, and Independent Verification & Validation (IV&V) inputs.

• Participate in program operating rhythm to include Program Increment (PI) Planning, program risk/issue/opportunity (RIO) process, and EVMS activities.

• Takes a collaborative approach to develop and execute project and process plans, implement policies and procedures, and develop and maintain roadmaps.

• Acquires resources for projects and processes and provides oversight and approval of technical approaches in alignment with organizational strategy.

• Demonstrate a commitment to the mission and motivation to combine the team’s energy and expertise to achieve a common objective.

• Lead technical planning and execution for software scope, schedule, and cost, including Earned Value Management (EVM) duties and reporting.

Basic Qualifications (Required Skills/ Experience):

• 3+ years of experience managing or leading teams in a software engineering discipline

• 3+ years of experience with project management principles

• Experience in Agile Software Development

• Demonstrated ability to provide a high level of customer satisfaction

Preferred Qualifications (Desired Skills/Experience):

• Bachelor of Science degree from an accredited course of study in engineering, engineering technology (includes manufacturing engineering technology), chemistry, physics, mathematics, data science, or computer science or equivalent experience

• Strong communication skills – written/verbal

• Experience in developing large-scale software systems

• Experience developing software for real-time embedded systems

• More than 3 years of experience managing projects using Earned Value Management System (EVMS)

• Experience in C++ or Ada

• Experience working directly with DOD customers or participating in Program Increment (PI) planning and milestone reviews

• Experience with software requirement development

• Experience working with system/subsystem engineers

• Experience working with external software suppliers

Drug Free Workplace:

Boeing is a Drug Free Workplace (DFW) where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Travel:

Less than 10%, if any

Relocation:

This position offers relocation based on candidate eligibility. Note: Basic relocation will be offered for eligible internal candidates.

Conflict of Interest:

Successful candidates for this job must satisfy the Company’s Conflict of Interest (COI) assessment process.

Pay & Benefits:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay is based upon candidate experience and qualifications, as well as market and business considerations.

Summary pay range for Manager Level (Level K): $160,650 - $217,350

Potential signing bonus for eligible/qualified external candidates.

Applications for this position will be accepted until Mar. 27, 2026

Relocation

This position offers relocation based on candidate eligibility.

Security Clearance

This position requires the ability to obtain a U.S. Security Clearance for which the U.S. Government requires U.S. Citizenship. An interim and/or final U.S. Secret Clearance Post-Start is required.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for 1st shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.