Rh2 Engineering Bothell Jobs in Usa

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

The Boeing Regulatory Administration & Airworthiness team is seeking Experienced (Level 3) or Senior (Level 4) Airworthiness & Regulatory Engineer to join their team on-site in Everett, Washington .

This team has opportunities for those looking toward next steps in their career development in the field of aviation regulations and safety. If you are a growth-minded person with excitement for certification systems, realizing efficiencies, and thrives in an environment of latitude, we encourage you to apply.

The team and leadership encourage innovation and forward-thinking solutions in an autonomous atmosphere. The team enjoys problem solving through investigating issues, developing action plans, data analysis and driving systems level solutions. This is a dynamic and highly visible environment.

Primary responsibilities:

• Provides technical guidance and training relative to complex safety and airworthiness matters
• Coordinate with engineering teams, project administrators, and regulators (may include international regulators/validation authorities) to successfully certify projects for commercial aircraft production teams
• Review certification plans, write letters to regulators, and understand compliance process
• Leading cross-functional teams resulting in resolution of technical issues.
• Coordinate technical messaging and partnering with the FAA on regulatory issues
• Own, manage, and have/develop technical aptitude to enable execution of process/procedure documents (BPM, BPIs, D6s, D950s, etc.)
• Ensure proper coordination across products, platforms and functional areas to promote culture of compliance to requirements and application of procedures and FAA guidance
• Develop strategic action plans for changes to certification processes and execute those plans through completion
• Contribute to root cause corrective action plans for development and execution of noncompliance’s, voluntary disclosures, informal corrective actions, formal corrective actions, etc. including reviewing/researching processes, design practices, analysis, conducting root cause analysis, and identifying/owning corrective actions and corrective action plans

Basic Qualifications (Required Skills and Experience):

• Bachelor of Science degree in Engineering, Engineering Technology (including Manufacturing Technology), Computer Science, Data Science, Mathematics, Physics, Chemistry or non-US equivalent qualifications directly related to the work statement
• Level 3: 5+ years of related work experience or an equivalent combination of education and experience.
• Level 4: 9+ years of related work experience or an equivalent combination of education and experience.
• 5+ years of experience working directly with the FAA and/or ODA on Type Certification projects
• 5+ years of experience in developing, contributing and/or maintaining processes, policies, and procedures.
• Experience with project management and self-managing projects.
• Desire to work in a collaborative environment and ability to interact well with various levels of leadership and front-line employees
• Ability to accomplish goals on a self-directed basis
• Experience leading cross-functional teams 

Preferred Qualifications (Desired Skills and Experience):

• Experience in presenting data to customers, suppliers, and program and site leaders.
• Knowledge of software development and Digital Services product portfolio is preferred.
• Previous experience with Safety Management Systems and/or understanding of FAA Part 5 regulations relating to SMS (or the equivalent global ICAO standards).
• Understanding of Safety Risk Management/Bowtie methodology.
• Experience working across the certification value stream
• Experience communicating verbally and in writing, to a variety of audiences including FAA representation, ODA Leadership, Engineering Unit Members (E-UM) & Project Administrators (PA), and Program & Functional Leaders
• Experience coaching/teaching E-UMs, Design Approval Engineers, Technical Specialists, Cert Plan Owners/Authors on certification processes and tool usage
• Experience identifying web application impact due to changes in certification requirements
• Systems thinker capable of making engineering proposals based on data analysis and forecasting wide reaching and longer-term impacts
• Experience developing presentations and presenting to multiple levels of an organization
• Experience investigating and finding solutions to complex technical or regulatory issues
• Experience recognizing and balance conflicting priorities

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Pay & Benefits:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay is based upon candidate experience and qualifications, as well as market and business considerations.

Summary Pay Range :

• Experienced (Level 3): $114,750 - $155,250
• Senior (Level 4) $141,100 - $190,900

Applications for this position will be accepted until Mar. 21, 2026

Export Control Requirements:

This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a “U.S. Person” as defined by 22 C.F.R. §120.62 is required. “U.S. Person” includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee.

Export Control Details:

US based job, US Person required

Education

Bachelor's Degree or Equivalent Required

Relocation

This position offers relocation based on candidate eligibility.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for 1st shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

About Pinterest:

Millions of people around the world come to our platform to find creative ideas, dream about new possibilities and plan for memories that will last a lifetime. At Pinterest, we're on a mission to bring everyone the inspiration to create a life they love, and that starts with the people behind the product.

Discover a career where you ignite innovation for millions, transform passion into growth opportunities, celebrate each other's unique experiences and embrace theflexibility to do your best work. Creating a career you love? It's Possible.

At Pinterest, AI isn't just a feature, it's a powerful partner that augments our creativity and amplifies our impact, and we're looking for candidates who are excited to be a part of that. To get a complete picture of your experience and abilities, we'll explore your foundational skills and how you collaborate with AI.

Through our interview process, what matters most is that you can always explain your approach, showing us not just what you know, but how you think. You can read more about our AI interview philosophy and how we use AI in our recruiting process here.

Pinterest helps Pinners discover and do what they love. Core Engineering touches every surface the Pinner sees across the app and forms the front-and-center of the Pinterest experience for 500M+ Pinners every month. The Core team's mission is to recommend inspiring & engaging pins for all our Pinners. We are looking for a Machine Learning Engineer Engineering Manager II who can drive the team's technical direction, strategic planning and execution. You'll have the opportunity to lead a team that works cross-team on various innovative projects of new product experiences, builds large-scale low-latency systems and state-of-the-art machine learning models, and delivers great impact to our pinners and business metrics.

What you'll do:

• 
  
• Be responsible for major areas of search, recommendations, notifications, etc for more than 500 million monthly active Pinterest users. Potential areas of impact include ML based retrieval, multi domain ranking, L1 modeling, candidate generators, sequence modeling, relevance modeling, and infrastructure efficiency and scalability.
  
• Deeply understand the Pinterest product and drive the vision for the team, ensuring the team's work directly contributes to the company's goals.
  
• Manage and mentor a team of Machine Learning engineers (L13 - L16), providing technical guidance and support to help them grow their careers. Identify team needs and hire strong candidates.
  
• Collaborate closely with other engineering teams at Pinterest to enhance the experience for users, including Advanced Technology Group, Infrastructure, Content Understanding and User Understanding.
  
• Provide visibility to senior leadership regarding the team's global impact.
  
• Partner with stakeholders across the company, including product management, data scientists, and design, to shape the future of the content ecosystem and personalization at Pinterest.
  
• Build a culture of excellence and expertise within the team.
  

What we're looking for:

• 
  
• MS/PhD in Computer Science, ML, NLP, Statistics, Information Sciences, related field, or equivalent experience.
  
• Experience leading and working on a large-scale production recommendation, e-commerce, search or ads systems that are based on state-of-the-art machine learning and big data technology.
  
• Strong experience in related fields such as recommendation systems and applied machine learning experience is required. Natural language processing and computer vision is a bonus.
  
• Demonstrated ability to define and drive the strategic roadmap for scalable, production-quality systems from concept to execution.
  
• Strong focus on product impact and user experience within a consumer-focused environment.
  
• Minimum of 1 year of experience managing a high-performing machine learning engineering team of 10+ members.
  
• 8+ years of experience in software development, with a proven track record of delivering impactful solutions.
  

Relocation Statement:

• 
  
• This position is not eligible for relocation assistance. Visit our PinFlex page to learn more about our working model.
  

In-Office Requirement Statement:

• 
  
• We let the type of work you do guide the collaboration style. That means we're not always working in an office, but we continue to gather for key moments of collaboration and connection.
  
• This role will need to be in the office for in-person collaboration 1-2 times/quarter and therefore can be situated anywhere in the country.
  

#LI-REMOTE

#LI-DM57

At Pinterest we believe the workplace should be equitable, inclusive, and inspiring for every employee. In an effort to provide greater transparency, we are sharing the base salary range for this position. The position is also eligible for equity. Final salary is based on a number of factors including location, travel, relevant prior experience, or particular skills and expertise.

Information regarding the culture at Pinterest and benefits available for this position can be found here.

Our Commitment to Inclusion:

Build a Career That Matters with One of the World's Most Respected Employers!

- - - - - - - - - - - -

Michelin Louisville is seeking Engineering Co-Op students majoring in Chemical, Mechanical, Industrial, Computer, and Electrical Engineering to join the team at our plant in Louisville, KY.

In our petrochemical facility we produce synthetic rubber from monomer feedstocks and catalysts, through a polymerization reaction.

The product, after other operations, is carefully weighed and pressed into uniform bales before shipping to the next Michelin factory for tire production.

Our facility supplies various rubber products that go into tires in the USA, Canada, and in Michelin factories around the world. Our site is one of the three Michelin petrochemical sites producing synthetic rubber for cars, vans, trucks, two-wheelers, aircraft, agricultural tractors, and mining equipment.

WHAT WILL YOU DO

• Work on a project team to analyze data to improve performance and/or production
• Ensure products meet the defined quality and performance standards
• Assist with productivity, cost-reduction, and continuous-improvement projects
• Study processes and propose improvements

WHAT WILL YOU BRING

The ability to interact in a professional manner with external partners, suppliers, customers, and colleagues. Success in working with other people or team to meet a common objective. Proficient in the use of Microsoft Office Suite (Word, Excel, PowerPoint) and ability to learn other software systems. Minimum cumulative GPA of 3.0 Currently enrolled in a Mechanical, Chemical, Industrial, Computer, or Electrical Engineering or equivalent program at an accredited four-year college or university.

Ready to Shape the Future of Innovation?

Michelin is building a world-leading manufacturer of life-changing composites and experiences. Pioneering engineered materials for more than 130 years, Michelin is uniquely positioned to make decisive contributions to human progress and a more sustainable world. Drawing on its deep know-how in polymer composite materials, Michelin is constantly innovating to manufacture high-quality tires and components for critical applications in demanding fields as varied as mobility, construction, aeronautics, low-carbon energies and healthcare.

The care placed in its products and deep customer knowledge inspire Michelin to offer the finest experiences. This spans from providing data- and AI-based connected solutions for professional fleets to recommending outstanding restaurants and hotels curated by the MICHELIN Guide.

Why Michelin?

• Career Growth: Personalized development plans, mentorship, and cross-functional opportunities. Unique career paths and opportunities for advancement.
• Inclusive Culture: Thrive in a diverse, supportive environment where your competencies, contributions and behaviors are recognized. Option to join one of our Business Resource Groups and Inclusion Councils.
• Innovation-Driven: Work on projects that matter-from sustainable materials to digital transformation.
• Community Impact: Be part of a company that does what's right. We use sustainable business practices while balancing the needs of our customers and communities.

Michelin provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, sex (including pregnancy, gender identity, and sexual orientation), parental status, national origin, age, disability, genetic information (including family medical history), political affiliation, military service, or other non-merit-based factors. Consistent with these obligations, Michelin also provides reasonable accommodations to employees and applicants with disabilities and for sincerely held religious beliefs. If you need accommodation for any part of the employment process because of a disability, please contact us at .

This position is not available for immigration sponsorship.

We build the future with people like you. Begin your career with Michelin today!

Open date: April 23, 2025

Most recent review date: Thursday, Nov 20, 2025 at 11:59pm (Pacific Time)

Applications received after this date will be reviewed by the search committee if the position has not yet been filled.

Final date: Tuesday, Mar 31, 2026 at 11:59pm (Pacific Time)

Applications will continue to be accepted until this date, but those received after the review date will only be considered if the position has not yet been filled.

The Blum Center for Developing Economies at the University of California, Berkeley is generating an applicant pool of qualified instructors and invites applications to teach courses in the area of Development Engineering. In addition to core DevEng classes (DevEng 200, 202, 203, 204, 205, 206), new classes may be planned based upon student interest and candidate expertise. Candidates under consideration will be contacted by the Blum Center. The previous pool will close April 9, 2025. Those interested in remaining in the pool must reapply.

Founded in 2006, The Blum Center for Developing Economies at UC Berkeley brings together academics, partner organizations, entrepreneurs, and business leaders to solve the world's most pressing development challenges. Operating on the notion that a world-class public research university must be a force for tackling society's most persistent challenges, the Blum Center inspires and facilitates interdisciplinary research and problem-solving; teaches students to think critically and optimistically about issues of poverty and development; equips the next generation of social entrepreneurs with the skills needed to design, deploy, and scale world- changing innovations; and advises and trains groups and organizations on methods for fostering a culture of innovation in their workplaces. To learn more about our center please visit our website.

General Duties: Lecturers are responsible for the course syllabus, curriculum development and delivery, student mentoring, student assessment through relevant projects, problem sets, exams, class attendance and participation, and grades. Project-based courses will require working with potential sponsors.

The Blum Center welcomes candidates whose professional and teaching experiences align with our mission to help individuals and communities increase access to resources through economic development and technology innovation.

Unit:

Program: academics/development-engineering/

Labor Contract:

Bachelor's degree or equivalent international degree is required at time of application.

Required by the start of the appointment, applicants must hold either a master's degree or higher, or equivalent international degree, or at least 5 years of industry or nonprofit organization experience.

Ph.D. or equivalent international degree or graduate professional degree is preferred in a discipline associated with development engineering (e.g ., development technologies, development economics and business models, impact analysis, design for development, city planning, political economy). Teaching experience in two or more of the topic areas listed below is preferred. Also desirable are a strong track record in developing and implementing new and innovative methods of delivering education and hands-on learning, project-based learning, and experience working with students from a range of disciplines. Leadership experience in professional practice is preferred. Applicants must be eligible to work in the U.S.A.

Topic areas include, but are not limited to:

* Critical theories in global development, engineering, and design

* Human-centered design

* Design for base of the pyramid

* Poverty studies

* Community-based teaching, research, project-implementation

* Innovation studies / theory of change

* Sustainable development

* Social and environmental justice

* Engineering ethics

* Social entrepreneurship

* Innovation in humanitarian and disaster response

* Climate action

* Digital transformation of development

* AI for social impact

* Health technologies for low-resource settings

* Sustainability

* Software for Sustainable Design

* Multidisciplinary project-based courses that engage students in experiential learning to help to solve real-world problems (e.g. STEM Solutions for Social Impact; Hacking for Local; Design, Evaluate and Scale Development Technologies; Mission Driven Start-Ups)

• Curriculum Vitae - Your most recently updated C.V.

  
  

• Cover Letter

  
  

• Statement of Teaching - Please describe your prior teaching experience, teaching philosophy, and future instructional interests. You may include specific examples of how you have supported - or plan to support - student success through curriculum design, classroom environment, and teaching methods.

  
  

• Past Teaching Evaluation (Optional)

  
  

• 2 required (contact information only)

Help contact:

UC Berkeley is committed to diversity, equity, inclusion, and belonging in our public mission of research, teaching, and service, consistent with UC Regents Policy 4400 and University of California Academic Personnel policy (APM 210 1-d). These values are embedded in our Principles of Community, which reflect our passion for critical inquiry, debate, discovery and innovation, and our deep commitment to contributing to a better world. Every member of the UC Berkeley community has a role in sustaining a safe, caring and humane environment in which these values can thrive.

The University of California, Berkeley is an Equal Opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or protected veteran status.

For more information, please refer to the University of California's Affirmative Action and Nondiscrimination in Employment Policy and the University of California's Anti-Discrimination Policy.

In searches when letters of reference are required all letters will be treated as confidential per University of California policy and California state law. Please refer potential referees, including when letters are provided via a third party (i.e., dossier service or career center), to the UC Berkeley statement of confidentiality prior to submitting their letter.

As a University employee, you will be required to comply with all applicable University policies and/or collective bargaining agreements, as may be amended from time to time. Federal, state, or local government directives may impose additional requirements.

Unless stated otherwise, unambiguously, in the position description, this position does not include sponsorship of a new consular H-1B visa petition that would require payment of the $100,000 supplemental fee.

As a condition of employment, the finalist will be required to disclose if they are subject to any final administrative or judicial decisions within the last seven years determining that they committed any misconduct.

• 
  
• "Misconduct" means any violation of the policies or laws governing conduct at the applicant's previous place of employment, including, but not limited to, violations of policies or laws prohibiting sexual harassment, sexual assault, or other forms of harassment or discrimination, as defined by the employer.
  
• UC Sexual Violence and Sexual Harassment Policy
  
• UC Anti-Discrimination Policy
  
• APM - 035: Affirmative Action and Nondiscrimination in Employment
  

We're seeking a knowledgeable and detail-oriented Heat Treat Process Engineering Supervisor to lead and support all aspects of the heat treatment operations with a focus on quality, compliance, and continuous improvement.

POSITION SUMMARY:

The Heat Treat Process Engineering Supervisor serves as a technical expert responsible for ensuring the proper thermal processing of materials to meet metallurgical and production requirements meeting all CQI-9 requirements. This role includes overseeing furnace operations, audits, documentation, process control, equipment maintenance, and continuous improvement initiatives.

The ideal candidate will have strong metallurgical knowledge, heat treat process experience, the ability to troubleshoot equipment and process issues, and the ability to manage compliance in a dynamic manufacturing environment. This role has direct supervisory responsibility for Lab Technicians, including scheduling, performance management, training, and ensuring compliance with laboratory testing standards and metallurgical validation requirements.

ESSENTIAL DUTIES (Complete):

• Oversee and manage daily heat treat operations including carburizing, hardening, tempering, and stress relieving
• Ensure compliance with AIAG CQI-9: Heat Treat System Assessment (HTSA) and other applicable standards
• Implement and maintain heat treat process control plans per AIAG guidelines
• Conduct and lead CQI-9 self-assessments, audits, and ensure closure of gaps and non-conformances
• Ensure proper setup, calibration, and operation of furnaces and quench systems
• Monitor thermal cycles and maintain control charts, pyrometry data, and process records per CQI-9
• Support system accuracy tests (SAT), temperature uniformity surveys (TUS), and instrumentation calibration activities
• Ensure all documentation meets internal and customer-specific AIAG compliance requirements
• Collaborate with Engineering, Maintenance, and Quality to address process improvements and problem-solving
• Perform metallurgical inspections including hardness testing and microstructure verification
• Provide technical guidance to operators and maintenance personnel on best practices
• Develop and optimize heat treat process parameters including atmosphere control, quench severity, and thermal cycle design to meet metallurgical and dimensional requirements
• Atmosphere verification (Carbon Potential, Dew Point, etc.)
• Distortion Mitigation Strategy
• Develop, implement, and maintain training programs to ensure team competency on heat treat systems and compliance
• Lead root cause analysis and corrective action efforts for heat treat-related non-conformities
• Utilize Lean Six Sigma principles to drive cost reduction, efficiency, and quality improvements
• Maintain proper traceability and process documentation for internal and external audits
• Provide technical direction for furnace troubleshooting, repair validation, and upgrade initiatives in coordination with Maintenance
• Perform other duties as assigned or required in support of production and quality goals
• Directly supervise Lab Technicians, including daily work assignments and workload balancing
• Approve timecards, PTO, and manage attendance
• Perform other duties as assigned or required in support of production and quality goals

CORE COMPETENCIES:

• Action oriented: Demonstrates ownership in solving process and compliance issues
• Self-Motivated: Demonstrates ability to take initiative and drive to achieve results. Proactively drives conformance with CQI-9 requirements and continuous improvement
• Accountability: Demonstrates ability to take responsibility and maintains sense of ownership and follow through on commitments. Sets high standards of performance.
• Communication: Demonstrates ability to convey and distribute information effectively and encompass strong speaking, presentation, written and listening skills. Ability to create an environment for open communication, and communicates clearly across departments regarding heat treat and compliance status
• Teamwork: Demonstrates ability to work well with others to accomplish common goals and build a positive climate and trusting relationships within teams.
• Leadership: Demonstrates ability to give direction, motivate, manage and reward performance, provide constructive feedback and foster individual professional development. Trains and guides operators to follow standard operating procedures and compliance guidelines
• Reliability: Demonstrates dependability, accountability and trust. Follows processes and meets commitments. Delivers consistent process performance and regulatory documentation
• Decision-making: Demonstrates ability to discover opportunities in challenges, seek profit and sustainable growth, make courageous while sound decisions and demonstrate a good business understanding. Applies analytical skills and CQI-9 knowledge to make data-driven decisions

KNOWLEDGE, SKILLS & ABILITIES:

• Thorough understanding of heat treatment principles, metallurgy, and thermal processing equipment
• Working knowledge of CQI-9 audits, checklists, gap closures, and AIAG documentation practices
• Familiarity with control system troubleshooting, PLCs, HMIs, and data logging
• Ability to supervise, mentor, and train heat treat personnel on compliance, safety, and process controls
• Skilled in conducting microstructure analysis and hardness testing to validate process results
• Strong organizational and record-keeping skills for always maintaining audit-readiness
• Proficiency in Lean Manufacturing, 5S, and Continuous Improvement
• Physically capable of working in a high-temperature, industrial environment
• Commitment to upholding process integrity and product conformance to specification

WORKING ENVIRONMENTAL CONDITIONS:

• Work involves exposure to high-temperature equipment, hot surfaces, and industrial environments. May encounter fumes, noise, and moving machinery. Personal protective equipment (PPE), including heat-resistant gloves, face protection, and hearing protection, is required. Occasional exposure to quenchants, chemicals, and elevated platforms is expected. Safety training and environmental awareness are critical components of the role.

SUPERVISORY RESPONSIBILITY:

• This role has direct supervisory responsibilities.

The demands described here represent those that an employee must meet to perform the essential functions of this job successfully. Reasonable accommodations may be made to enable individuals with disabilities to perform these functions.

QUALIFICATIONS:

• Bachelors degree in Mechanical, Materials, Metallurgical, or Manufacturing Engineering required.
• Materials Science or Metallurgical Engineering preferred
• 7+ years of hands-on heat treat or metallurgical experience, preferably in automotive or aerospace manufacturing
• Demonstrated knowledge and application of CQI-9 Heat Treat System Assessment requirements
• Familiarity with AIAG standards and automotive core tools (APQP, PPAP, FMEA, SPC, MSA)
• Experience conducting and documenting SAT, TUS, and other pyrometry-related activities
• Experience operating batch and continuous furnaces, quench systems, and thermal processing equipment
• Demonstrates ability to directly supervise lab personnel including assigning work, evaluating performance, managing corrective actions, and developing team capabilities.
• Creates accountability, enforces standards, and drives measurable performance improvements.
• Proficient in hardness testing, blueprint reading, GD&T, and metallurgical inspection techniques
• Strong computer skills including Microsoft Office and plant data collection systems
• Excellent troubleshooting, documentation, and analytical skills
• Commitment to safety, quality, and environmental standards
• Ability to lead and train team members on technical and compliance-related topics
• Ability to work independently, manage multiple tasks, and prioritize effectively

Compensation details: 96 Yearly Salary

PI34bc9acf25ca-26289-39818891

L3Harris is dedicated to recruiting and developing high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers' mission and quest for professional growth. L3Harris provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do.

L3Harris is the Trusted Disruptor in defense tech. With customers' mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security.

Job Title: Lead, Software Engineering

Job Code: 33519

Job Location: Palm Bay, FL

Job Schedule: 9/80: Employees work 9 out of every 14 days – totaling 80 hours worked, and have every other Friday off

Job Description:

L3Harris is seeking Embedded Software Engineers in Palm Bay, FL to work on a dynamic team supporting design, development, integration, and test of embedded computing systems in support of the F-15 Aviate Navigate Communicate (ANC) and Mission Processor (MP) development and EMD production programs. The L3Harris team is developing the most advanced and secure mission architecture.

Will work closely with cross functional members of the engineering organization to develop and evaluate interfaces between hardware and software, and operational performance requirements and design of the overall system.

Essential Functions:

• Software development
  • C/C++ Software Development using existing tools
  • Requirements, test, systems architecture, software architecture, and design
    • Testing tools may include test frameworks in Python
    • Software Coverage Tools
• Development will support L3Harris mission systems integration architecture
• Development will support customer deployments
• No immediate travel expected but may require travel to customer site in St. Louis, MO, if in a software leadership role, to support program meetings

Qualifications:

• Bachelor's Degree and minimum 9 years of prior relevant experience. Graduate Degree and a minimum of 7 years of prior related experience. In lieu of a degree, minimum of 13 years of prior related experience.
• Secret US Security Clearance

Preferred Additional Skills:

• Experience with embedded security and encryption
• Ability to work well across multiple engineering disciplines
• The ability to understand and work with Network storage as well as an understanding of Gigabit Ethernet or InfiniBand.
• A functioning knowledge of authentication schemes from Radius to LDAP.
• Relevant integration and test experience on complex military systems.
• Working knowledge of interfaces and handoffs with digital engineering.
• Software leadership experience such as CSWE, IPTL, CAM experience
• Experience interacting with software development throughout the design cycle including major design reviews and architecture reviews.
• Experience with Hardware and Software integration and test
• DevSecOps and Test automation experience using Python or similar languages
• 8+ years of embedded development,
• Experience with APIs/BSPs/Drivers, OpenGL and/or Vulkan, health and status, Precision Time Protocol version 2 (PTPv2), H.264, ARINC-818
• 8 + years' experience with C++ systems development with understanding of Software/Hardware co-design, distributed systems design, and software/computer architecture.
• 6 + years' experience with avionics lifecycle execution.
• 5+ years' experience with safety-critical software development / DO-178 B or above industry standards
• Working knowledge of Bash/Python, Intel x86/ARM/FPGA/SoC, GPP, GPU, Embedded System Design, Release Engineering, Understanding of Change and Configuration Management, Debug/Trace Analysis, Real-time Operating Systems like VxWorks/LynxOS/Integrity, SELinux, Software Integration, Test, and Verification/Validation
• Experience on complex systems with a focus on mission computing, memory systems, and/or displays
• Excellent verbal and written communication skills in a technical information environment
• Full software development lifecycle experience including requirements flow-down and decomposition, allocation to design, translation to code, hw/sw integration, design verification/product qual, transition to production, fielded product support, including changes for component obsolescence.
• Utilizing tools/processes to support a structured work flow (requirements management, configuration management, workflow and change control, etc).
• Familiarity with Linux development environment and tools.

#LI-CS2

L3Harris Technologies is proud to be an Equal Opportunity Employer. L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law.

Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information.

By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions.

L3Harris Technologies is an E-Verify Employer. Please click here for the E-Verify Poster in English or Spanish. For information regarding your Right To Work, please click here for English or Spanish.

Job Description At Boeing, we innovate and collaborate to make the world a better place.

We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth.

Find your future with us.

The Boeing Company is seeking a Systems Engineering Manager (L-Level) to lead a team of SEIT engineers on National Programs in El Segundo, CA.

You will be a leader of a high performance SEIT team interacting with customers, suppliers, program management, integration and test engineers and senior technologists.

The candidate will demonstrate the ability to provide high impact, creative solutions to complex technical problems, the ability to work as part of a large team, and the ability to provide critical support and independent review of the work of teammates.

The successful candidate will develop and efficiently execute a set of integrated SEIT plans and technical artifacts that will enable the program to meet the technical performance parameters and mission success.

The position will have both functional and program execution responsibilities.

Program Execution responsibilities include: Plan and manage SEIT work scope (technical, cost, schedule, and risk) Actively manage the IPT to drive decisions, design development and requirements to ensure program milestones are met Actively manage the IPT cost and schedule performance per baseline plan Provide headcount variance and milestones status as appropriate for weekly, monthly and quarterly reporting to program and ensure visibility to Management where appropriate to deal with systematic issues Address IPT level earned value and compile/manage scope growth that deviates from the baseline Support Quarterly EAC process and review impacts with program and functional management Resolve technical issues in a timely manner and per schedule commitment Close out action items per schedule commitment Report program risks, seek opportunities to save cost/reduce schedule, and contribute to a positive and effective work environment.

Interface with diverse program and customer teams Functional Management Responsibilities include: Provide Functional Leadership to a group of 15-20 SEIT engineers supporting National Programs Coach, counsel, mentor and provide developmental opportunities for employees Perform employee performance management, hiring, retention, awards/recognition, and goal setting Execute critical program staffing and redeployment activities Development and execution of a robust training and development plan Development of employee engagement activities to motivate and engage the workforce Manage and enforce critical SEIT processes and standards Basic Qualifications (Required Skills/Experience): Bachelor of Science degree in Engineering, Engineering Technology (including Manufacturing Technology), Computer Science, Data Science, Mathematics, Physics, Chemistry or non-US equivalent qualifications directly related to the work statement Experience in Space Systems and working with multi-discipline teams 5 years of experience leading multi-disciplined complex engineering projects and teams across multiple organizations Preferred Qualifications (Desired Skills/Experience): Experience with Satellite Systems Engineering Processes Excellent oral and written communication skills Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies .

Shift Work Statement: This position is for 1st shift.

At Boeing, we strive to deliver a Total Rewards package that will attract, engage, and retain the top talent.

Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and several programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay is based upon candidate experience and qualifications, as well as market and business considerations.

Summary pay range: $181,900
- $246,100 Applications for this position will be accepted until Mar.

27, 2026 Export Control Requirements: This position must meet U.S.

export control compliance requirements.

To meet U.S.

export control compliance requirements, a "U.S.

Person" as defined by 22 C.F.R.

§120.62 is required.

"U.S.

Person" includes U.S.

Citizen, U.S.

National, lawful permanent resident, refugee, or asylee.

Export Control Details: US based job, US Person required Education Bachelor's Degree or Equivalent Required Relocation This position offers relocation based on candidate eligibility.

Security Clearance This position requires an active U.S.

Top Secret/SCI Security Clearance (U.S.

Citizenship Required).

(A U.S.

Security Clearance that has been active in the past 24 months is considered active) Visa Sponsorship Employer will not sponsor applicants for employment visa status.

Shift This position is for 1st shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer.

Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

d24ad0b8-823f-4e68-a892-2986ccdf7392

Location: Florence, KY (CVG 100)

Shift: Wednesday/Thursday- Saturday, 6am-6pm. Person will be trained on First shift; Monday to Friday 6:00 am to 3:00 pm and later will need to work Wednesday/Thursday- Saturday, 6am-6pm (403/C)

JOB SUMMARYIndustrial Eng Technician I will support the Industrial Engineering Department in planning, designing, implementing, and managing; integrated, production and service delivery systems that assure performance, reliability, maintainability, schedule adherence and cost control within the production site.Main focus will be assisting the IE in layout and process changes in production and entering data in IE related systems.ESSENTIAL DUTIES AND RESPONSIBILITIES

· Assist in the preparation of an area for a line move or process change· Update the Product-Process-Time database (IEDB), as directed by the Industrial Engineer· Update/Create production Visuals, as directed by the Industrial Engineer· Order, receive and validate tooling, as directed by the Industrial Engineer· Insure the standardization of Jabil processes throughout the site in accordance with the global, regional and site direction· Support the Lean organization by maintaining a solid process foundation and data integrity in order to support process improvement through the organization· Comply and follow all procedures within the company security policy.· May perform other duties and responsibilities as assigned

JOB QUALIFICATIONS/KNOWLEDGE REQUIREMENTSKey Requirements:

· Understanding and application of broad range of industrial engineering tools (ie. Work measurement, process mapping, facilities and workstation design, etc.)

· A minimum of 1-2 years of manufacturing engineering/Industrial Engineering or equivalent technical roles experience· Eye for detail when updating systems· Basic analytical ability· Basic communication skills· Proficiency in use of personal computers, Microsoft Office products, Microsoft Visio, Microsoft Project, and AutoCAD skills required.

Location: Florence, KY (CVG 100)

Shift: Wed./Thurs.- Sat.- 6pm - 6am (404/D). Need to get trained on Monday to Friday 3:00 pm to 12:00 midnight shift and later work in 404 shift from Wednesday/Thursday- Saturday 6:00 pm to 6:00 am

JOB SUMMARYIndustrial Eng Technician I will support the Industrial Engineering Department in planning, designing, implementing, and managing; integrated, production and service delivery systems that assure performance, reliability, maintainability, schedule adherence and cost control within the production site.Main focus will be assisting the IE in layout and process changes in production and entering data in IE related systems.ESSENTIAL DUTIES AND RESPONSIBILITIES

· Assist in the preparation of an area for a line move or process change· Update the Product-Process-Time database (IEDB), as directed by the Industrial Engineer· Update/Create production Visuals, as directed by the Industrial Engineer· Order, receive and validate tooling, as directed by the Industrial Engineer· Insure the standardization of Jabil processes throughout the site in accordance with the global, regional and site direction· Support the Lean organization by maintaining a solid process foundation and data integrity in order to support process improvement through the organization· Comply and follow all procedures within the company security policy.· May perform other duties and responsibilities as assigned

JOB QUALIFICATIONS/KNOWLEDGE REQUIREMENTSKey Requirements:

· Understanding and application of broad range of industrial engineering tools (ie. Work measurement, process mapping, facilities and workstation design, etc.)

· A minimum of 1-2 years of manufacturing engineering/Industrial Engineering or equivalent technical roles experience· Eye for detail when updating systems· Basic analytical ability· Basic communication skills· Proficiency in use of personal computers, Microsoft Office products, Microsoft Visio, Microsoft Project, and AutoCAD skills required.

Director - Data Center Engineering & Consultancy

(candidate must be based and eligible to work in Texas,Unites States)

We are partnering with a globally recognised engineering and infrastructure platform with deep expertise in the design and delivery of mission-critical digital infrastructures.

They are currently seeking a Director of Data Center Engineering & Consultancy to lead design and advisory engagements while supporting the delivery of complex data center projects across international markets, with a strong focus on the US.

The role combines technical leadership with commercial involvement, including advising clients on data centre design and best practices, leading multidisciplinary project teams, and supporting business development through proposals, RFP responses, and client engagement.

You’ll be joining a business known for its deep engineering expertise and hands-on approach to delivering resilient, high-performance digital infrastructure.

Interested? Drop me a message or send your CV to