Resource Lighting Controls Jobs in Usa
9,046 positions found — Page 14
Controls & Integration Engineer III
Location:
Jessup, MD
Job Id:
789
# of Openings:
1
TITLE: CONTROLS & INTEGRATION ENGINEER V
LOCATION: JESSUP, MD
*Salary Negotiable
POSITION SUMMARY:
Controls Engineers are responsible for designing, developing, installing, and maintaining equipment used to monitor and control systems, equipment and processes. They work in various industries including industrial controls and power controls and protection systems. Controls engineers are technical experts in areas such as advanced process control, instrumentation, distributed control systems, PLCs, and SCADA systems. Controls engineers use these skills to design and implement solutions to our customer's complex needs.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
To perform this job successfully, an individual must be able to perform the following satisfactorily; other duties may be assigned. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Technical Responsibilities
Design / Engineering
- Initiates design documents for small projects and in support of large programs
- Develops design documents narratives
- Performs requirements analysis
- Develops Sequence of Operations / System Functional Documentation
- Create Subsystem Designs (CAD / Panels / Layouts / Wiring / SCADA Screens / Hardware / Communications)
- Develops Specifications
- Performs QA/QC and technical reviews of designs
- Plans and Design Procedures and Equipment for Integrated Systems Factory Testing
- Comment Resolution
Mechanical-focused controls engineer (BAS/BMS)
- Experience on EPMS monitoring
- Certifications in Platforms (at least one), familiarity with any others preferred: Ignition, Aveva, Automated Logic, Siemens, Schneider EBO, Niagara N4, Iconics Gen64
- Experience with Federal Government controls projects (ICS/EMCS/UMCS) preferred
- Familiarity with Cisco network switch programming and design preferred
Programming
- Lead programming / configuration team efforts for complex automation and SCADA applications.
- Program / Configure / troubleshoot PLCs, RTUs, and/or HMI systems
- Testing / Troubleshooting / Deployment / Commissioning
- Author testing / commissioning procedures
- Preparation of test reports
- Originates test procedures
- Commissioning of deployed systems
- Development of test equipment and simulation devices
- Perform Factory and Field Testing
Maintenance
- Perform troubleshooting on service calls to existing and legacy system operators
- Perform hardware / software upgrades and replacements on existing systems
Managerial Responsibilities
Estimates
- Conducts any surveys, inspections, tours, etc. of client sites, as required
- Prepares cost estimates and supporting documents for small projects
- Perform hardware / software upgrades and replacements on existing systems
- Evaluation and pricing of change orders
Personnel Management
- Assigns technical tasks and coordinates with entry-level engineers
- Assigns tasks and coordinates with Technical Staff
QUALIFICATIONS:
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Education/Experience:
- Experience in reading electrical and control schematics and plans
- Experience in control system startup, configuration, and calibration
- Experience in testing and troubleshooting control systems
- Experience using basic electrical and machinist hand tools
- Experience using testing, calibration, or industry-specific tools and software
- 3-7 years' experience
- Bachelor's degree in engineering or higher
- Associate degree (add 3 years)
- High school diploma (add 5 years)
- Must be a US Citizen
Computer Skills:
- Experience in computer networks
- Experience in CAD/CAE Software (Visio, AutoCAD)
- Experience in schedule management software
- Standard Office Software (Microsoft Word, Excel, etc.)
Certificates and Licenses:
* Required Certifications
- Certification in one or more PLC / Automation Platform, such as: Niagara N4, Schneider, Rockwell, Siemens, etc.
- Certification in one or more SCADA platform, such as: Iconics, Ignition, etc.
* Preferred Licenses / Certifications
- Certification in one or more PLC / Automation Platform, such as: Niagara N4, Schneider, Rockwell, Siemens, etc.
- Certification in one or more SCADA platform, such as: Iconics, Ignition, etc.
- Design Build Institute of America (DBIA)
- Engineer in Training (EIT) in relevant in field
Supervisory Responsibilities:
* No supervisory responsibilities
Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
- While performing the duties of this job, the employee is regularly exposed to computer screens for an extended period of time; Sitting for extended periods of time; Reach by extending hands or arms in any direction; Have finger dexterity in order to manipulate objects with fingers rather than whole hands or arms, for example, using a keyboard; Listen to and understand information and ideas presented through spoken words and sentences; Communicate information and ideas in speaking so others will understand; Read and understand information and ideas presented in writing; Apply general rules to specific problems to produce answers that make sense; Identify and understand the speech of another person.
The above job description is not intended to be an all-inclusive list of duties and standards of the position. Incumbents will follow any other instructions, and perform any other related duties, as assigned by their supervisor.
CPG is an equal opportunity employer. We will consider all employment applicants without attention to age, race, color, religion, sex, sexual orientation, gender identity, national origin, veteran, or disability status.
CPG Participates in E-Verify
Learn more about CPG by checking out our website here
#LI-TG1
Pay Range: $98,891 - $148,392 per year
Apply for this Position
Controls & Integration Engineer II, Electrical
Location:
19775 Belmont Executive Plaza
Suite 200
Ashburn, VA
Job Id:
921
# of Openings:
1
TITLE: Controls & Integration Engineer II, Electrical
LOCATION: Ashburn, VA
POSITION SUMMARY: Controls Engineers are responsible for designing, developing, installing, and maintaining equipment used to monitor and control systems, equipment and processes. They work in various industries including building management systems, power system automation and protection systems. Controls engineers are technical experts in areas such as advanced process control, instrumentation, distributed control systems, PLCs, and SCADA systems. Controls engineers use these skills to design and implement solutions to our customers' complex needs.
Specific areas of expertise for this position include power chain monitoring and control systems in Data Centers and /or mission critical environments. Experience in Electrical Power Monitoring Systems (EPMS) and field device configuration such as gateways, PLC, Meters, Relays, and SCADA/HMI software. Experience in Building Automation Systems (BAS) and configuration/programming of field controllers is beneficial.
ESSENTIAL DUTIES AND RESPONSIBILITIES: To perform this job successfully, an individual must be able to perform the following satisfactorily; other duties may be assigned. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions.
Technical Responsibilities
- Design / Engineering
- Assists Senior Engineers in design documents for SCADA/Automation projects
- Developing design document narratives
- Perform requirements analysis
- Understanding of Sequence of Operations (SOO) / System Functional Documentation
- Create Subsystem Designs (CAD / Panels / Layouts / Wiring / SCADA Screens / Hardware / Communications)
- Comment Resolution
- Reviews and comments on 3rd party design documents for SCADA/Automation projects in support of large programs/projects
- Review design document narratives
- Perform execution and design scope gap analysis
- Review Sequence of Operations / System Functional Documentation to ensure compliance with project requirements
- Review Subsystem Designs (CAD / Panels / Layouts / Wiring / SCADA Screens / Hardware / Communications) for project compliance
- Assist in reviewing project specifications
- Assist in creation of testing plans and procedures for Integrated Systems Factory Testing
- Programming
- Program / configure / troubleshoot Controllers, PLCs, RTUs, and/or HMI systems
- Testing / Troubleshooting / Deployment / Commissioning
- Assist senior engineers in creating and updating testing and commissioning procedures
- Preparation of test reports
- Originates test procedures
- Commissioning of deployed systems
- Development of test equipment and simulation devices
- Perform Factory and Field Testing
- Maintenance
- Perform troubleshooting on service calls to existing and legacy system operators
- Perform hardware / software upgrades and replacements on existing systems
Managerial Responsibilities
- Estimates
- Assists senior engineers in preparation of cost estimates and supporting documentation
- Work with relevant stakeholders to review scope of project
- Conduct any surveys, inspections, tours, etc. of client sites, as required
- Assists senior engineers in evaluation and pricing of change orders from vendors
- Personnel Management
- Assigns tasks and coordinates with Technical Staff
- Provides technical direction and on-the-job training to drafters, engineering technicians, and less experienced engineers.
QUALIFICATIONS:To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions.
Education/Experience:
- Bachelor degree in electrical or mechanical engineering and 2-5 years field experience
- Associate degree in the electrical or mechanical field (add 3 years field experience)
- High school diploma (add 5 years field experience)
- 2-5 years' experience with designing and servicing controls systems for switchgear, substations, metering and SCADA/Fault Data/SER/Integration-Automation equipment installation and testing
- Experience in reading electrical and control schematics
- Experience in electrical power monitoring systems (EPMS) startup, configuration, and calibration
- Experience in testing and troubleshooting control and protection systems
- Experience using basic electrical and hand tools
- Experience using testing, calibration, or industry-specific tools and software
- Experience testing, reading/verifying all voltage and current inputs to relays; verifying all metering (local and SCADA); calibrating all relays; trip testing (local and SCADA); verifying all alarms (local and SCADA); verifying all alarms (local and SCADA); verifying all function switches, etc.
- Experience with 3 phase power systems; power system protection & control schemes; test equipment; test equipment software
- MUST BE A US CITIZEN
Computer/Networking Skills:
- Experience in OT and IT networking technologies and topologies
- Experience troubleshooting and diagnosing OT and IT networks and protocols
- Experience in CAD/CAE Software (Visio, AutoCAD)
- Experience in schedule management software (Project, Primavera P6)
- Standard Office Software (Microsoft Word, Excel, Access etc.)
Certificates and Licenses:
- Required Certifications
- Certification in one or more PLC / Automation Platform, such as: Niagara N4, Schneider Power Monitoring, Rockwell, Siemens, JCI, Eaton Foreseer, etc.
- Certification in one or more SCADA platforms, such as: Iconics, Ignition, Aveva, etc.
- Preferred Licenses / Certifications
- Design Build Institute of America (DBIA)
- Certified SCADA Security Architect (CSSA)
- Certified Automation Professional (CAP)
Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
- While performing the duties of this job, the employee is regularly exposed to computer screens for an extended period of time; Sitting for extended periods of time; Reach by extending hands or arms in any direction; Have finger dexterity in order to manipulate objects with fingers rather than whole hands or arms, for example, using a keyboard; Listen to and understand information and ideas presented through spoken words and sentences; Communicate information and ideas in speaking so others will understand; Read and understand information and ideas presented in writing; Apply general rules to specific problems to produce answers that make sense; Identify and understand the speech of another person.
The above job description is not intended to be an all-inclusive list of duties and standards of the position. Incumbents will follow any other instructions, and perform any other related duties, as assigned by their supervisor.
CPG is an equal opportunity employer. We will consider all employment applicants without attention to age, race, color, religion, sex, sexual orientation, gender identity, national origin, veteran, or disability status.
* We Utilize E-Verify
#LI-TG1
Pay Range: $85,996 - $129,050 per year
Apply for this Position
Controls & Integration Engineer I, Mechanical
Location:
Remote
Job Id:
917
# of Openings:
1
TITLE: Controls & Integration Engineer I, Mechanical
LOCATION: Dallas, TX
POTISION SUMMARY: Controls Engineers are responsible for designing, developing, installing, and maintaining equipment used to monitor and control systems, equipment and processes. They work in various industries including building management systems, power system automation and protection systems. Controls engineers are technical experts in areas such as advanced process control, instrumentation, distributed control systems, PLCs, and SCADA systems. Controls engineers use these skills to design and implement solutions to our customers' complex needs.
Specific areas of expertise for this position include monitoring and control systems in Data Centers and /or mission critical environments. Experience in Building Automation Systems (BASS) and field device configuration such as field level controllers, PLCs, protocol converters, and SCADA/HMI software. Experience in Electrical Power Monitoring Systems (EPMS) and configuration/programming of electrical gear interfaces is beneficial.
ESSENTIAL DUTIES AND RESPONSIBILITIES: To perform this job successfully, an individual must be able to perform the following satisfactorily; other duties may be assigned. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions.
Technical Responsibilities
- Design / Engineering
- Assists Senior Engineers in design documents for SCADA/Automation projects
- Developing design document narratives
- Perform requirements analysis
- Understanding of Sequence of Operations (SOO) / System Functional Documentation
- Create Subsystem Designs (CAD / Panels / Layouts / Wiring / SCADA Screens / Hardware / Communications)
- Comment Resolution
- Reviews and comments on 3rd party design documents for SCADA/Automation projects in support of large programs/projects
- Review design document narratives
- Perform execution and design scope gap analysis
- Review Sequence of Operations / System Functional Documentation to ensure compliance with project requirements
- Review Subsystem Designs (CAD / Panels / Layouts / Wiring / SCADA Screens / Hardware / Communications) for project compliance
- Assist in reviewing project specifications
- Assist in creation of testing plans and procedures for Integrated Systems Factory Testing
- Programming
- Program / configure / troubleshoot Controllers, PLCs, RTUs, and/or HMI systems
- Testing / Troubleshooting / Deployment / Commissioning
- Assist senior engineers in creating and updating testing and commissioning procedures
- Preparation of test reports
- Originates test procedures
- Commissioning of deployed systems
- Development of test equipment and simulation devices
- Perform Factory and Field TestingMaintenance
- Maintenance
- Perform troubleshooting on service calls to existing and legacy system operators
- Perform hardware / software upgrades and replacements on existing systems
Managerial Responsibilities
- Estimates
- Assists senior engineers in preparation of cost estimates and supporting documentation
- Work with relevant stakeholders to review scope of project
- Conduct any surveys, inspections, tours, etc. of client sites, as required
- Assists senior engineers in evaluation and pricing of change orders from vendors
- Personnel Management
- Assigns tasks and coordinates with Technical Staff
- Provides technical direction and on-the-job training to drafters, engineering technicians, and less experienced engineers.
QUALIFICATIONS:To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions.
Education/Experience:
- Bachelor's degree in electrical or mechanical engineering and 2-5 years field experience
- Associate degree in the electrical or mechanical field (add 3 years field experience)
- High school diploma (add 5 years field experience)
- 2-5 years' experience with designing and servicing controls systems for chiller plants, complex air distribution equipment, equipment installation, and testing
- Experience in reading mechanical and control schematics
- Experience in building automation systems (BAS) startup, configuration, and calibration
- Experience in testing and troubleshooting control systems
- Experience using basic electrical and hand tools
- Experience using testing, calibration, or industry-specific tools and software
- Experience testing, reading/verifying all voltage and current inputs to relays; verifying all metering (local and SCADA); calibrating all relays; trip testing (local and SCADA); verifying all alarms (local and SCADA); verifying all alarms (local and SCADA); verifying all function switches, etc.
- Experience with test equipment and test equipment software
- Experience with networking design, configuration, and troubleshooting
- Experience with air handlers, chiller plant systems and data center CRAC units
- Ability to travel up to 80%
- MUST BE A US CITIZEN
Computer/Networking Skills:
- Experience in OT and IT networking technologies and topologies
- Experience troubleshooting and diagnosing OT and IT networks and protocols
- Experience in CAD/CAE Software (Visio, AutoCAD)
- Experience in schedule management software (Project, Primavera P6)
- Standard Office Software (Microsoft Word, Excel, Access etc.)
Certificates and Licenses:
- Required Certifications
- Certification in one or more PLC / Automation Platform, such as: Niagara N4, Schneider, Rockwell, Siemens, JCI, ALC, Distech, etc.
- Certification in one or more SCADA platforms, such as: Iconics, Ignition, Aveva, etc.
- Preferred Licenses / Certifications
- Design Build Institute of America (DBIA)
- Certified SCADA Security Architect (CSSA)
- Certified Automation Professional (CAP)
Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
- While performing the duties of this job, the employee is regularly exposed to computer screens for an extended period of time; Sitting for extended periods of time; Reach by extending hands or arms in any direction; Have finger dexterity in order to manipulate objects with fingers rather than whole hands or arms, for example, using a keyboard; Listen to and understand information and ideas presented through spoken words and sentences; Communicate information and ideas in speaking so others will understand; Read and understand information and ideas presented in writing; Apply general rules to specific problems to produce answers that make sense; Identify and understand the speech of another person.
The above job description is not intended to be an all-inclusive list of duties and standards of the position. Incumbents will follow any other instructions, and perform any other related duties, as assigned by their supervisor.
CPG is an equal opportunity employer. We will consider all employment applicants without attention to age, race, color, religion, sex, sexual orientation, gender identity, national origin, veteran, or disability status.
*We utilize E-Verify
#LI-TG1
Pay Range: $85,996 - $129,050 per year
Apply for this Position
Join this growing Company in the recycling of plastics through the build-out of new plants. Continuous Process in a PSM regulated environment is what you will need to be successful in this role. Corporate role on site in Atlanta, GA. One plant operational, 2nd plant coming online this year and more in the works!
Role Overview
Our client is seeking an experienced Senior Electrical / Controls Engineer to join their team and support the development of engineering and construction packages for facility expansion and buildouts.
The role will be the primary lead on specification and procurement of instrumentation related to
process control, process indication, and control system infrastructure.
This role reports to Company Electrical Engineering Manager.
Responsibilities
• Assist with the design and modification of new and existing process control and instrumentation systems.
• Specify both discrete, analog, and networked control solutions.
• Prepare specifications, design-bid documentation, and construction estimates.
• Review supplier designs against licensor requirements, code requirements, and customer
requirements.
• Develop instrumentation standards to ensure selection compliance across multiple facilities.
• Develop maintenance procedures for instrumentation and control systems.
• Develop inspection plans for instrumentation and control systems.
• Develop commissioning plans for projects and system upgrades as required.
• Make recommendations for additional equipment as necessary.
• Participate in the review of Management of Changes, PHA Action Requests, Construction
Information Requests, and Change Order Requests.
• Experience in continuous process manufacturing in all the following project phases:
documentation, detailed design generation, implementation, system integration, testing and on-site, startup, using PSM (Process Safety Management) elements and Industrial standards.
• Assist with local, state, and federal permitting applications.
• Potential to travel to other Nexus locations or vendor locations for meeting or Factory Acceptance
Testing (FAT) as required (~10%).
• Design and specify 480V distribution infrastructure, motor control centers, VFD panels, PLC
panels, RIO panels, and other control panels.
• Assist with local, state, and federal permitting applications.
Education
• BS in Electrical Engineering or extensive documented experience in lieu of engineering degree.
Experience
• 10+ years previous experience developing PLC programs, using multiple vendor hardware, for
process and discrete controls. Rockwell ControlLogix (primarily), Codesys, Siemens TIA Portal.
• 7+ years designing electrical control, motor control and heater control panels.
• 7+ years’ experience using AutoCAD Electrical.
• 7+ years of field installation / construction experience
• Strong background and understanding of P&ID drawings.
• Knowledge and experience with applicable NEC, UL / CSA standards for electrical equipment &
Electrical construction best practices.
• Previous experience with PSM-covered facilities.
• Previous experience working with Management of Change (MOC) and Continuous process
Improvement programs.
• Experience with multiple industrial communication protocols, i.e. Ethernet I/P, Modbus TCP / RTU,
Profibus / Profinet, etc.
• Industrial Power distribution systems to 480 VAC.
• Exposure to Medium Voltage power distribution (4160 VAC or higher).
Knowledge, skills, and abilities
• Self-starter with strong initiative.
• Entrepreneurial spirit and attitude.
• Ability to manage multiple projects on different timelines.
• Comfortable in a fast-paced, purpose-driven, collaborative environment.
• Experience working with multiple outside engineering groups.
• Demonstrate a strong desire to learn manufacturing processes.
Must be authorized to work in the USA without the need for sponsorship now or in the future.
Job Description
Main Responsibilities: • Develop electrification control solutions at both component and system levels for a broad range of applications using a model‑based design approach. • Evaluate control designs through analysis, simulation, Hardware‑in‑the‑Loop (HIL) testing, laboratory testing, and field testing. • Interface with stakeholders to develop control system requirements that support vehicle electrification solutions. • Conduct electric drive and vehicle system simulations to support control system development and vehicle performance assessments.
Show Less
Additional Skills & Qualifications
What Skills You Need: • 2 or more years of experience in power electronics or control algorithm development. • Proficiency in MATLAB, Simulink, and Simscape. • Experience simulating power electronics, electric machines, and/or control systems. • Effective written and verbal communication skills (English). • Relevant academic research experience will be equally considered. What Makes You Stand Out: • Hands-on laboratory or vehicle testing experience with power electronics or electric motors. • Experience with Hardware-in-Loop testing. • Experience with auto-code generation and embedded software implementation on microcontrollers and FPGAs. • Working knowledge of version control and Agile software development • Experience with advanced research topics. • Experience with power electronics hardware or software design. • Experience with advanced control systems and techniques such as observers, model predictive control, filter design, etc. • Experience with power electronics control and electric motor control. • M.S. degree in Electrical Engineering, Physics Engineering, or Mechanical Engineering with a focus on power electronics and/or control systems. Education: • Minimum of a B.S. degree in Electrical Engineering, Mechanical Engineering, or Physics.
Project Controls Engineer 4
Compa Industries is searching for qualified candidates for a Senior Project Controls Engineer position at the Los Alamos National Laboratory in Los Alamos, NM.
Salary: $85/hr - $90/hr
Location: Los Alamos, NM (Onsite)
Citizenship: US citizenship Required
Work Schedule: 9/80 schedule
The Project Controls Engineer will play a critical role in supporting the Earned Value Management System (EVMS) and the broader Project Controls System at Los Alamos National Laboratory (LANL). This position significantly influences the success of high-impact projects through expert cost engineering, scheduling, and project management support. The specialist will contribute to developing advanced techniques and standards, guiding project teams, and ensuring projects remain on schedule and within budget.
Responsibilities and Duties
- Perform cost estimating, cost analysis, and control activities for highly complex projects.
- Supervise and provide technical direction for planning/scheduling and cost engineering activities.
- Develop and maintain project schedules and monitor progress against milestones.
- Prepare, review, and present detailed cost engineering and scheduling reports.
- Analyze cost trends and schedule performance for management attention.
- Provide innovative solutions to project control challenges and guide technical teams.
- Act as a subject matter expert in EVMS tools and processes.
- Utilize independent judgment to determine the best course of action for achieving project objectives.
- Work under consultative direction and with minimal supervision to meet long-range project goals.
- Support project administrative and organizational tasks, including financial reporting and status updates.
Minimum Qualifications
Demonstrated experience in project controls functions, including:
- Planning and scheduling (development, control, analysis)
- Cost engineering (estimating, control, financial reporting, and analysis)
- Proficiency in multiple software applications used for project controls and cost analysis.
- Experience with supervision, personnel administration, and technical training.
- Understanding of financial reporting systems and cost control procedures.
- Ability to work independently with wide latitude in methods and evaluation criteria.
Desired Skills
- Subject matter expertise in project management and EVMS.
- Proven ability to implement corrective actions and monitor project progress.
- Familiarity with engineering principles related to technical project implementation.
- Knowledge of control account management (CAM) duties and responsibilities.
- Strong analytical skills with the ability to develop innovative solutions to complex issues.
- Viewed as an expert in the field with the ability to guide the development of future concepts and project methodologies.
Education and Experience Requirements
- Bachelor’s degree in a relevant field.
- Minimum of twelve (12) years of related experience.
- An equivalent combination of education and experience may be considered.
- Post-graduate coursework or certifications in project controls or engineering disciplines is preferred.
Next Steps
If you are a driven and highly experienced project controls professional seeking a pivotal role in national security and scientific innovation, we encourage you to apply. Please submit your resume to be considered for this opportunity at Los Alamos National Laboratory. A recruiter from Compa Industries will contact qualified candidates to discuss next steps.
Why Work at COMPA Industries?
We strive to provide careers, not just jobs, for our employees. We invest in and serve the communities where we work and live. We provide best-in-class administrative, professional, and technical services to solve complex problems to meet customer mission-critical objectives.
For over 30 years, Compa has been a trusted partner in progress. We combine decades of technical expertise with a forward-thinking spirit, tackling intricate challenges in nuclear facilities alongside the brightest minds in science and engineering. Join us, and don't just build your career, build the future, with competitive compensation, a collaborative culture, and the chance to make a real difference for national security and beyond.
COMPA is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to age, race, color, religion, sex, national origin, sexual orientation, disability, or protected Veteran status.
COMPA's policy could disqualify an applicant who has certain criminal history from employment in particular positions.
Controls Engineer
The Controls Engineer is responsible for supporting and executing technical initiatives related to plant automation and control systems. This role involves maintaining electrical distribution systems, implementing control system improvements, assisting with equipment start-ups, maintaining automation documentation, and diagnosing control-related issues.
Key Responsibilities
- Lead and coordinate technical and strategic automation projects within a fast-moving manufacturing environment
- Assist with the deployment of new systems by configuring control modules and designing HMI interfaces
- Improve process control performance through initiatives such as advanced process control, alarm management, and operator interface enhancements
- Oversee the integration and functionality of PLCs, HMIs, VFDs, and related control systems
- Train plant personnel on the operation and functionality of newly installed or modified automation systems
- Support the standardization of control architecture, control logic, operational procedures, and system documentation including as-built drawings
- Act as the internal point of contact during system startups and commissioning activities performed by external automation vendors and integrators, ensuring proper documentation and knowledge transfer
- Develop, troubleshoot, and maintain automation documentation such as electrical schematics, functional descriptions, PLC programs, and SCADA configurations
- Diagnose and resolve automation issues within processing systems
- Lead or support automation improvement initiatives and optimization projects
- Provide mentorship and technical guidance to Instrumentation and Controls Technicians
- Perform additional responsibilities as required
Skills and Qualifications
- Ability to read, interpret, modify, and upgrade PLC programs (Rockwell experience preferred; Siemens experience beneficial), VFDs, and industrial networking equipment
- Experience updating and maintaining P&IDs and electrical or mechanical drawings (AutoCAD preferred)
- Strong analytical ability to evaluate workflows, redesign processes, and implement improved procedures or policies
- Excellent communication and interpersonal skills with the ability to collaborate across teams and departments
- Ability to assess and address training needs related to automation systems and operational processes
- Comfortable working with engineering drawings, manuals, and technical documentation
- Ability to manage uncertainty and adapt in a fast-paced operational environment
- Reliable attendance is required for this role
- Must have strong English reading, writing, and speaking skills
Walt Disney Imagineering is the creative force that imagines, designs, and brings to life all Disney theme parks, resorts, attractions, and cruise ships worldwide. Working across a spectrum of disciplines that range from creative and conceptual to scientific and technical, Imagineers blend an innovative mixture of storytelling, art, science, and technology to create immersive experiences, memorable destinations, and innovative entertainment for families around the globe.
Nearly every project at Walt Disney Imagineering includes a first-of-its-kind. Innovation is in our DNA, and Imagineers constantly push the boundaries of technology and invent new goals as well as the solutions to achieve them. As Imagineers, one of our greatest rewards is knowing that the experiences and environments we create inspire others. The diversity of expertise at Imagineering makes us uniquely capable of influencing positive change in our communities and around the world. And knowing that we have helped make a difference is incredibly fulfilling and inspiring for all of us.
Are you an OT or ICS engineer who has an interest and aptitude for network design and cyber security?
As a Ride Control Systems Security Engineer you will work within Walt Disney Imagineering's Ride Studio on multiple ride attraction projects and are responsible for network architecture and cyber security design and implementation activities on new ride projects for installation in all our parks across the globe. Join us in a highly collaborative and self-directed atmosphere to lead efforts applying leading edge network technology on Disney rides!
You will report to the Ride Controls Systems Engineering Executive
This is a full time role.
What You Will Do:
* Lead Operational Technology (OT)/ Industrial Control Systems (ICS) network architecture and cyber security systems development, design, and implementation for automation and embedded control systems on a wide variety of large-scale, highly complex, and innovative ride systems
* Perform engineering design and analysis for ride system networks, with focus on automation system architecture
* Design and test cyber security solutions and network architectures for ride systems
* Design, model, and analyze data network communication systems
* Research and test new products, technologies, and methodologies and conduct trade-off studies
* Prepare and propose new cyber security and network architecture concepts and standards
* Lead standards and policies development for ride control network and cyber security architectures
* Collaborate with and support project teams on network requirements, implementation, and issues
* Collaborate with attraction development teams to design and deliver ride networks
* Develop and analyze OT network performance requirements for high availability real-time system
* Develop and capture requirements and functional specifications in documents, drawings, and models
* Develop implementation plans and budgets for ride control network systems
* Develop and implement mock-ups and prototypes for proof-of concept efforts
* Develop test requirements and documents and conduct ride network installation/commissioning efforts
Required Qualifications & Skills
* At least 3 years of experience with design, engineering, installation, and commissioning of highly networked automation, process control, and industrial control systems
* At least 3 years of experience in network systems design, installation and configuration
* At least 3 years of experience with Linux and Windows system administration experience
* Demonstrated experience in network design and analysis approaches to ensure and balance network availability, performance, resiliency and security
* Knowledge of wired and short-range wireless communication networks used in high availability industrial and embedded applications
* Solid understanding of communication technologies/protocols: TCP/IP, CAN, Serial, ProfiNET, Ethernet/IP, EtherCAT, 802.11
* Demonstrated experience in wireless communications for control and monitoring high-availability safety critical systems
* Demonstrated experience evaluating and remediating network and system vulnerabilities
* Demonstrated experience with cyber security technologies including firewalls, endpoint security solutions, VPNs, network security monitoring and detection, and security information and event management (SIEM).
* Solid skills in technical document writing
* Ability to travel and work both domestically and internationally, for varying durations that could be up to 3 months
* Ability to handle multiple complex efforts simultaneously, coordinate team efforts, and manage tasks and priorities
* Ability to maintain knowledge of constantly changing network and cyber security concerns in OT/ICS systems
Preferred Qualifications and Skills
* Proficient in Rockwell and/or Siemens automation systems architecture and components
* Experienced in fail-safe and safety-related system design and analysis
* Experience with multitasking software platforms and design approaches
* Experience with wired and wireless network design and configuration
* Experience with firewalls, VPNs, network security monitoring, and vulnerability assessment tools
* Knowledge of software configuration management/version control tools
* Cisco, GIAC, CompTIA or other relevant network and cyber security certifications strongly preferred
Education
* As a minimum a Bachelor of Science Degree in engineering, computer science, or related field from an accredited university required; Electrical Engineering preferred
Additional Information:
* Disney offers a rewards package to help you live your best life. This includes health and savings benefits, educational opportunities, and special extras that only Disney can provide. Learn more about our benefits and perks at ( ) .
#DXmedia
The hiring range for this position in California is $129,300 to $173,300. The base pay actually offered will take into account internal equity and also may vary depending on the candidate's geographic region, job-related knowledge, skills, and experience among other factors. A bonus and/or long-term incentive units may be provided as part of the compensation package, in addition to the full range of medical, financial, and/or other benefits, dependent on the level and position offered.
Job Description
At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.
Boeing Commercial Airplanes is excited to offer opportunities for an Assembler Installer Cable Controlled Systems to join our Joint and Installation team in Everett and Renton, Washington.
As an Assembler Installer for Cable Controlled Systems, you will be pivotal in ensuring the highest standards of quality and safety in the installation and assembly processes. Your expertise will be essential as you perform critical tasks such as reaming, riveting, and setting cable tensions using a tension meter, all while adhering to precise specifications. You will meticulously select and verify parts, ensuring they are free of defects and suitable for installation, while also utilizing blueprints and work orders to guide your work. Your attention to detail will be crucial as you clean surfaces, apply sealants, and conduct thorough inspections to confirm that all assemblies meet regulatory compliance and operational excellence.
You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.
Position Responsibilities:
Perform pickup, rework, authorized changes, and functional checks on work typically installed or assembled by lower classifications.
Use a tension meter to set cable tension according to specifications.
Conduct reaming and riveting as necessary to complete work assignments.
Report job handicaps, such as errors in parts, materials, or assembly procedures, following shop procedures.
Select appropriate parts, materials, and tools, and work with blueprints, assembly pages, and work orders to install and adjust cable-controlled systems in the aircraft.
Review bar charts or automated timelines to determine job assignments and obtain necessary drawings.
Locate work areas using drawings or paperwork that specify airplane and section numbers.
Verify kitted parts against installation plans and bill of materials to ensure they are correct and free of defects.
Obtain parts from the Parts Control Area if they are not pre-picked, ensuring they meet specifications.
Drill, ream, and countersink holes in parts/assemblies per specifications, using appropriate tools.
Disassemble parts and deburr holes to prepare for fastener installation.
Use solvents to clean surfaces prior to sealing or assembly, and apply sealants, alodine, primers, adhesives, and special finishes as required.
Install cable control pulleys and rig control cables according to drawings and specifications.
Check and adjust actuator motors for full travel of flight control systems using power sources and hand tools.
Clean the work area and ensure the removal of Foreign Object Debris (FOD) and submit completed jobs or in-process checks to inspectors as required.
Physical Demands and Potential Hazards:
Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.
Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.
Work in environments that may involve contact with metals, solvents, and coolants.
Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.
Adapt to varying noise levels and atmospheric conditions.
Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.
This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.
This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee.
Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.
Basic Qualifications:
Experience using hand tools and/or hand-held power tools
Experience working with safety and quality processes and procedures.
Basic Computer experience and competency.
Ability to walk constantly throughout the workday; stand 6-8 hours per day; climb or work from stairs/steps up to 8 hours per day; climb ladders; bend and twist frequently up to six hours per day; squat and kneel.
Able to perform work at heights up to 50 feet above ground level with appropriate safety gear.
Preferred Qualifications:
Experience reading and interpreting drawings, specifications,
material processes, schematic and diagrams
Attended a Boeing partnered manufacturing related high school or
Preferred community and technology college academic program
Typical Education & Experience:
High school graduate or GED preferred.
Relocation:
Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.
Drug Free Workplace:
Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.
Union Representation Statement:
This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.
Shift Work Statement:
This position is for a variety of shifts
Total Rewards & Pay Transparency:
At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.
The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.
The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.
Pay is based upon candidate experience and qualifications, as well as market and business considerations.
Summary pay range: $24.32 – $53.30
Applications for this position will be accepted until Sept. 04, 2026
Language Requirements
English Preferred
Relocation
Relocation assistance is not a negotiable benefit for this position.
Visa Sponsorship
Employer will not sponsor applicants for employment visa status.
Shift
This position is for variable shift
Equal Opportunity Employer:
Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
Paragon’s experienced professional staff is dedicated to producing high-quality documentation and providing safe field execution to support its clients’ projects in line with local, state and federal guidelines and regulations.
About this position: Project Control Manager Location – El Paso, TX The Essential Duties and Responsibilities are intended to present a descriptive list of the range of duties performed for this position and are not intended to reflect all duties performed within the job.
Other duties may be assigned.
To perform this job successfully, an individual must be able to satisfactorily perform each essential duty.
The requirements listed below are representative of the knowledge, skill and/or ability required.
Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions of the position.
Wage/Salary Range: $75,000 Applicants will be notified via phone or email within ten (10) business days of submittal.
Essential Duties & Responsibilities Responsible for the management of the Project Control activities including scheduling, budgeting, estimating, risk management, cost reporting & forecasting and earned value measurement & productivity reporting and oversight and audit/validation of contractors cost, progress, and schedule activities.
Lead development of project specific PC execution strategies.
Coordinate with Operations Managers and Project Managers on reporting, project control activities, and other services.
Manage development of procedures for various project control activities including budget preparation, forecasts, progress validation and related cost engineering and planning/scheduling functions.
Manage cost estimating/forecasting activities including periodic project re-estimates and cost benchmark metrics.
Facilitate and oversee the risk assessment, mitigation and contingency planning process for the project.
Ensure full integration between the estimating, cost control, planning/scheduling, and risk management functions within projects.
Participate and assist with contract administration activities.
Required (Minimum Necessary) Qualifications Education Requirements: Bachelor’s degree in applicable field.
Project Management Professional Certification.
Level of Experience Requirements: Minimum 5 years of experience in project control on large construction projects.
Knowledge, Skills, Abilities, and Other Characteristics Significant experience in construction and/or maintenance field required specializing in project controls.
Demonstrated experience and working understanding of project planning and scheduling, cost control and cost estimating.
Ability to interpret and perform analysis of cost and schedule reports and data.
Ability to work within a diverse cultural environment.
Has clearly demonstrated strong technical competence.
Experience in preparation of cost estimates.
Demonstrated capability to lead a group responsible for control of planning, scheduling, cost control and cost estimating activities.
Preferred Master’s degree in applicable field.
Experience implementing construction management software Supervisory Responsibilities This position will have supervisory responsibilities.
You may delete this line if it does not apply to the job.
DOT Covered/Safety-Sensitive Role Requirements This position is not subject to federal requirements regarding Department of Transportation “safety-sensitive” functions.
You may delete this line if it does not apply to the job.
Necessary Physical Requirements The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this role.
Employees must always maintain a constant state of mental alertness.
Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions.
Essential and marginal functions may require maintaining physical condition necessary for bending, stooping, sitting, walking or standing for prolonged periods of time; most of time is spent sitting in a comfortable position with frequent opportunity to move about.
Work Environment The work environmental characteristics described here are representative of those that must be borne by an employee to successfully perform the essential functions of the role.
Employees must always maintain a constant state of situational awareness.
Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions.
Must be able to work in an office setting, sit for long periods of time, talk on the telephone, work on a computer for extended periods of time, and lift and carry up to 25 pounds on a periodic basis.
Must possess: visual acuity to review written documentation; ability to hear and understand speech at normal room levels and on the telephone; and the manual dexterity to operate a cell phone, telephone and keyboard.
Physical Setting: Job is performed in an office setting with exposure to computer screens and requires extensive use of a computer, keyboard, mouse and multi-line telephone system.
The work described herein is primarily a modern office setting.
Schedule and Flexibility: Monday-Friday 0800 – 1700 core hours, additional time as needed Additional Qualifying Factors As a condition of employment, you will be required to pass a pre-employment drug screening and have acceptable background check results.
If applicable to the contract, you must also obtain and maintain the appropriate clearance levels required and must also be able to obtain access to military installations.
Other Pertinent Work Details: Occasional travel may be required.
Shareholder Preference BSNC gives hiring, promotion, training, and retention preference to BSNC shareholders, shareholder descendants and shareholder spouses who meet the minimum qualifications for the job.
Bering Straits Native Corporation is an equal opportunity employer.
All applicants will receive consideration for employment without regard to any status protected by state or federal law, or any other basis prohibited by law.
