Remote Control Sample Jobs in Usa

The Broward County Board of County Commissioners is seeking qualified candidates for Mosquito Control Inspector(Highway & Bridge Maintenance Division).
THIS JOB ANNOUNCEMENT WILL REMAIN OPEN UNTIL SUFFICIENT NUMBER OF APPLICATIONS ARE RECEIVED AND MAY CLOSE AT ANY TIME.


The Mosquito Control Inspector for the Highway and Bridge Maintenance Division is an hourly position that engages in routine field inspection work in the control and extermination of mosquitoes. Incumbent is responsible for mosquito control and surveillance activities to aid the County's larvicide and adulticide programs.
Work involves responsibility for making inspections of suspected mosquito breeding places in residential and rural areas. Work follows established routines with specific instructions received from superiors on all new assignments. Work includes collecting and identifying mosquito species in the field, recording all daily activities, updates data, and reports mosquito problems to supervisor as needed in a timely manner. Incumbent utilizes appropriate control method(s), applies the control method(s) in accordance with the applicable laws and Broward County policy. Work is reviewed by the incidence of public complaints against mosquito nuisance and field inspections by supervisors. This position involves routine and frequent exposure to toxic/caustic chemicals. The ability to wear an appropriately-fitted respirator mask and other personal protective equipment are requirements for this position.
***This position requires availability to work night-time, daytime and weekends as needed with notification to changes in schedule sometimes being provided with less than 24 hours' notice***

General Description
Routine field inspection work in the control and extermination of mosquitoes.
Works under close to general supervision according to set procedures, but determines how or when to complete tasks.
Minimum Education and Experience Requirements
Requires six (6) months in handling pesticide and some knowledge of public health pest control or closely related experience.
Special Certifications and LicensesPublic Health Applicators License issued by State of Florida must be obtained within six (6) months of employment.

Must possess and maintain a valid Florida Class E Driver's License for duration of appointment.

Preferences

• Associates degree or higher in Biology, Entomology or related field
• Training certification in mosquito biology and control techniques
• Class A or B valid Florida Commercial Driver's License
• FAA Part 107 Certificate (Drone Pilot License)
• 1+ years of experience using larvicide equipment and turbine sprayer (i.e., calibration of equipment, measuring/mixing, loading and testing of biological larvicide materials, such as Vectobac or similar products).
• 1+ years of experience with Surveillance and Testing activities (i.e., setting up traps, dip sampling, larval counts, data collection and analysis)
• 1+ years of experience working with Geographic Information Systems (GIS).
• 1+ years of experience with repair/maintenance of mosquito control equipment.
• 1+ years of experience with supporting aerial mosquito control operation.

The functions listed below are those that represent the majority of the time spent working in this class. Management may assign additional functions related to the type of work of the job as necessary.

Makes systematic daily checks of assigned area in the salt marshes during mosquito breeding periods; inspects ditches at regular intervals to determine incidence of mosquito breeding; determines breed of mosquito and the stage of the breeding process; keeps constant watch to prevent new breeding areas from developing; watches for incoming flights of adult mosquitoes.

Makes site inspections in an assigned residential area; identifies him/herself to residents; looks for containers holding water, pools, elevator shafts, sumps, and other places where mosquitoes could breed; calls undesirable situations to the attention of the occupant or owner; keeps work records of inspections made; makes count of adult mosquitoes at established stations throughout the County; drives spray truck and operates spraying machinery; operates equipment to combat early stages of mosquitoes.

Answers public complaints regarding annoyances by mosquitoes; determines the breed of mosquito involved and locates breeding places in the area; takes routine corrective measures as indicated.

Confers with superiors in the analysis of scientific and procedural problems involved and works out plans to abate or prevent the development of mosquito nuisance; assigns and supervises subordinate mosquito inspectors in various areas of the County; prepares and maintains survey maps.

Advises the public on methods and procedures to prevent mosquito breeding and to abate mosquito nuisance.

Orders, issues, and maintains adequate stock levels of supplies and equipment.

Performs related work as assigned.

Physical Demands

Physical demands refer to the requirements for physical exertion and coordination of limb and body movement.

Performs light work that involves walking or standing most of the time and involves exerting up to 20 pounds of force on a regular and recurring basis, or skill, adeptness and speed in the use of fingers, hands or limbs on repetitive operation of mechanical or electronic office equipment or tools within moderate tolerances or limits of accuracy.

Unavoidable hazards refer to the job conditions that may lead to injury or health hazards even though precautions have been taken.

Involves routine and frequent exposure to toxic/caustic chemicals.

Competencies

• Decision Quality

• Action Oriented

• Plans and Aligns

• Ensures Accountability

• Drives Results

• Communicates Effectively

• Courage

• Manages Ambiguity

• Collaborates: Building partnerships and working collaboratively with others to meet shared objectives.
• Customer focus: Building strong customer relationships and delivering customer-centric solutions.
• Instills trust: Gaining the confidence and trust of others through honesty, integrity, and authenticity.
• Values differences: Recognizing the value that different perspectives and cultures bring to an organization.

• Inspecting output samples using industry-appropriate methods, such as comparing to standards, measuring dimensions and examining functionality.
• Responsible for audits, surveillances and inspections while also working closely with our QA department to ensure integration.
• Reviewing blueprints and specifications to compare to produced goods.
• Recording inspection results by completing reports, summarizing re-works and wastes and inputting data into quality database.
• Training the production team on quality control measures to improve product excellence.
• Proposing improvements to the production process.
• Monitoring the use of equipment to ensure it is safe and discard any that do not meet requirements.
• Updating job knowledge by engaging in educational opportunities and regular training.
• Keeping measurement equipment operating accurately by following calibration requirements and calling for repairs.
• Reading and interpreting engineering drawings and radiographs.
• Using gauges such as calipers and micrometers to measure products.
• Collecting and compiling statistical quality data.
• Assisting in the development of test methods and inspection plans.
• Determining the causes of product defects and reworks.
• Verifying all equipment is calibrated correctly.
• Additional duties as necessary.
  

• Must have at least 5 years' experience in the Quality Assurance/Control field and technical or vocational training.
• Must have a strong understanding of Government Specs.
• Must have extensive knowledge of AWS D1.1 (Structural Steel), D1.2 (Aluminum), D1.5 (Bridge Code), and D1.6 (Stainless Steel).
• Must have knowledge of NAVSEA Standards, QA. & OSHA Standards 29 CFR 1920 (Occupational Safety and Health Standards) & 1915 (Personal Protective Equipment for Shipyard Employment).
• Must have ABS code construction experience.
• Knowledge of NAVSEA Standard Items and Quality Assurance requirements
• Must have a valid Driver's license and a clean DMV record.
• Must have expert knowledge of NAVSEA 009 Standard Items.
  

• Minimal Travel; 10% or less.
  

• Must be able to lift, carry and transport heavy equipment and boxes. The exact weight requirements will be determined by the specific job, but no less than 20 lbs.
• Able to work on and climb ladders, work in extreme temperature environments, aboard ships, in shipyards, under industrial conditions and in confined spaces, including enter and moving through manholes.
• Able to perform other duties as required which may involve high heat, humidity, noise and dirty conditions.
• Frequent exposure to noise due to machinery and equipment.
• Employee is required to operate trucks, forklifts & man-lifts.
• While performing the duties of this job, you may frequently be required to stand, walk & sit; use hands or fingers; handle or feel; talk and hear. Occasionally required to reach with hands and arms, climb and balance, stoop, squat, kneel, twist and crawl.
• Work in extreme temperatures and conditions. At times you will work in areas that have less adequate ventilation
• Frequent use of respirator.
  

ABOUT US

The Major Bridges P3 Initiative is part of the PennDOT Pathways Program, which is designed to bolster PennDOT’s ongoing effort to address the state’s growing backlog of replacement and rehabilitation needs for major bridges that are approaching the end of their useful life. By allowing for the use of a P3 delivery model, PennDOT will be able to replace or rehabilitate major bridges around the state more quickly, achieve significant savings for taxpayers, and minimize the impact on the traveling public.

The purpose of the Pennsylvania Major Bridges Project is to deliver infrastructure improvements focusing on the rehabilitation and replacement of nine major bridges (and associated roadways) across the Commonwealth. Upon completion, it is estimated to be over $2B.

The Bridging Pennsylvania Constructors team is led jointly by S&B USA Construction and FCC. The consortium members have a 20-year-long track record of successful project delivery with PennDOT, having worked in all PennDOT districts.

POSITION SUMMARY

The Construction Quality Inspection (CQIS) supports the execution of the Quality Control Plan by performing daily inspections, coordinating with the Contractor’s QC Testing team, and ensuring that work conforms to project specifications, contract documents, and regulatory standards. Reporting directly to the Project Manager (PM) and QC Coordinator, the CQIS operates independently of construction operations and collaborates closely with the Contractor QC (CQC) for inspection scheduling, reporting, and coordination. This position includes oversight of subcontractor QC activities and testing processes. Third-party inspectors may supplement staffing based on seasonal workload.

ESSENTIAL DUTIES AND RESPONSIBILITIES

• Perform inspections to monitor the quality of workmanship and ensure materials meet specified requirements in accordance with project plans, standards, and technical provisions.
• Witness sampling and testing performed by subcontractors and Contractor QC personnel; verify compliance with required specifications.
• Generate and/or update daily, weekly, and monthly inspection reports, standard forms, and checklists as outlined in the Construction Quality Management Plan (CQMP).
• Coordinate with Contractor QC Testing staff to support timely inspection and testing activities.
• Track and document field inspections, test results, material approvals, and any observed nonconforming work or deficiencies.
• Assist with planning and scheduling inspections, including contributing to weekly and three-week rolling inspection and acceptance testing schedules.
• Maintain oversight of subcontractor QC inspection and testing activities; ensure their work aligns with contract and quality standards.
• Serve as a daily point of contact for Department personnel and IQF staff regarding quality control issues, testing notices, and inspection coordination.
• Support implementation of corrective actions for nonconforming work and coordinate with the QC Coordinator and PM as necessary.
• Operate independently from construction operations, providing unbiased quality assurance oversight in accordance with CQMP protocols.
• Ensure compliance with documentation procedures and maintain all required inspection records in an auditable format.

EDUCATION, SKILLS & QUALIFICATIONS

• Associate or bachelor’s degree preferred, or equivalent technical education in construction management, engineering, or a related field.
• Minimum 3+ years of field experience in heavy-civil or transportation construction with emphasis on quality control and inspection.
• Basic knowledge of Quality Control inspection standards, procedures, and applicable codes required.
• Experience with and knowledge of PennDOT construction specification PUB 408, PUB 19, BC and RC standard drawing, Field and Laboratory Testing manual.
• NICET Level III in Highway Construction Inspection, ACI, and NECEPT Concrete certification.
• Experience in at least one PennDOT job as an inspector, QC, OR engineer, or similar qualifications is strongly preferred.
• Knowledge and application of workplace safety principles, use of personal protective equipment, and basic prevention standards for the use of machinery in construction activities.

PHYSICAL DEMANDS

• Must be able to remain in a stationary position for long periods.
• Requires driving occasionally for up to 2-5 hours.
• Requires working in outdoor weather conditions.
• Minimum physical exertion, such as walking, lifting, standing for long periods, bending, or reaching, may be required.
• Requires visual ability to perform tasks: preparing and analyzing data, plans, drawings, outlines, viewing a computer, and extensive reading.
• Requires the ability to physically operate standard office equipment, i.e., laptop, phone, keyboard, mouse, etc.

BENEFIT SUMMARY

Medical Insurance, Dental Insurance, Vision Insurance, 401K Plan, Life Insurance, Disability Insurance, Paid Time Off, and Paid Holidays, Vehicle Assistance, and Relocation Package (if applicable).

DESCRIPTION OF THE PROJECT

The Major Bridges P3 Initiative is part of the PennDOT Pathways Program, which is designed to bolster PennDOT’s ongoing effort to address the state’s growing backlog of replacement and rehabilitation needs for major bridges that are approaching the end of their useful life. By allowing for the use of a P3 delivery model, PennDOT will be able to replace or rehabilitate major bridges around the state more quickly, achieve significant savings for taxpayers, and minimize the impact on the traveling public.

The purpose of the Pennsylvania Major Bridges Project is to deliver infrastructure improvements focusing on the rehabilitation and replacement of nine major bridges (and associated roadways) across the Commonwealth. Upon completion, it is estimated to be over $2B.

The first two projects that are set to start are I-81 (New Milford, PA) and I-80 (Clarion, PA).

The Bridging Pennsylvania Constructors team is led jointly by S&B USA Construction and FCC. The consortium members have a 20-year long track record of successful project delivery with PennDOT, having worked in all PennDOT districts.

BPC is an Affirmative Action/Equal Opportunity Employer and does not discriminate against any applicant for employment or employee because of race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, protected veteran status, genetics, creed, veterans’ status, military status or any other characteristic prohibited under Federal, State, or local laws.

If a reasonable accommodation is needed for the interview process, please contact Tanya Sykes at or (215) 609-4258 ext. 107.

Location: The Villages, FL

Company: DZ Corporation

Employment Type: Full-Time

DZ Corporation is a trusted name in the concrete industry, committed to delivering high-quality products and services. We are currently seeking a dedicated and detail-oriented Quality Control Technician/Inspector to join our team in The Villages, FL.

• Inspect and test concrete samples to ensure compliance with industry standards and project specifications.
• Conduct pre-pour and post-pour inspections of forms, molds, and reinforcement placement.
• Perform wet and hardened concrete testing (e.g., slump, air content, compressive strength).
• Monitor curing processes and verify proper procedures are followed.
• Maintain accurate documentation of inspections, tests, and corrective actions.
• Communicate with production teams and suppliers to resolve quality issues.
• Ensure compliance with safety and environmental regulations.
• Assist in developing and improving quality control procedures.
• Conduct audits of batch plants and material suppliers.

• High school diploma or equivalent; technical training or associate degree in construction or materials science is a plus.
• 2+ years of experience in concrete quality control or inspection.
• Familiarity with ACI, ASTM, and NPCA standards.
• ACI Certification (Field Testing Technician Grade I) preferred.
• Strong attention to detail and problem-solving skills.
• Ability to work independently and as part of a team.
• Basic computer skills for data entry and reporting.

• Competitive salary based on experience.
• Health, dental, and vision insurance.
• Paid time off and holidays.
• Opportunities for professional development and certification.
• Supportive team environment.

QC Analyst – Night Shift | Bethlehem, PA

$22–$24/hr. + 10% shift differential

7:00 PM – 7:30 AM | 2-2-3 schedule

6-month contract

Join a FAST growing Pharmaceutical Manufacturing site supporting the production of Critical Care drug products in a GMP lab environment.

Job Summary: Perform analytical testing of In-Process, Bulk, Stability and Finished Product to provide information about the quality, identity, purity, and safety of the material and provide decisions into the next steps in the manufacturing process.

Key Responsibilities:

• Perform sample preparation and GMP testing of raw materials, in-process, bulk, stability, and finished product
• Operate and maintain analytical instruments (HPLC, GC, UV, FTIR, KF, ICP/MS, or AA)
• Complete GMP documentation in compliance with SOPs and data integrity requirements
• Support OOS, deviations, and lab investigations
• Prepare standards, solutions, and calibration activities
• Maintain lab logbooks, inventory, and stability samples
• Review analytical data and production records, including peer review
• Follow all GMP, safety, and quality procedures in a 12-hour shift environment

Job Requirements:

• Must have at least 1 year of experience in a GMP laboratory setting.
• Familiar with GMP/GLP and FDA requirements a plus
• Strong documentation skills
• Familiar with SAP, OpenLab, Ensur, MS Office

• 
  
• Perform environmental monitoring of cleanrooms.
  
• Collect water samples according to schedule and ensure timely testing.
  
• Perform and review microbiological assays including:
  
  • 
    
  • Gram Stain
    
  • Endotoxin
    
  • Sterility testing
    
  • Microbial identification
    
  • Bioburden testing
    
  • Plate reading
    
  
  
  
• Conduct utility monitoring for purified water systems and compressed gases.
  
• Perform data entry, trending analysis, and prepare reports or slides for management review.
  
• Assist with investigations related to Out-of-Specification (OOS) results and manage deviations related to microbiological procedures.
  
• Perform routine maintenance of laboratory equipment and lab areas.
  
• Review and approve final product release test results.
  
• Perform additional duties as assigned.
  

• 
  
• Associate Degree (AA) with 1+ year of experience in a Microbiology Lab or Environmental Monitoring, OR
  
• High School Diploma with 2+ years of experience in a Microbiology Lab or Environmental Monitoring.
  

• 
  
• Experience with microbiological techniques, including:
  
  
  • 
    
  • Environmental air monitoring
    
  • Water testing
    
  • Surface monitoring
    
  
  
  
• Experience with aseptic techniques and cleanroom operations.
  
• Ability to gown for entry into aseptic manufacturing areas and lift approximately 25 lbs.
  
• Knowledge of GMP, SOPs, and quality control processes in commercial manufacturing.
  
• Proficiency in MS Word, Excel, PowerPoint, and other computer applications.
  
• Strong interpersonal, verbal, and written communication skills.
  
• Ability to work in a fast-paced environment with minimal supervision and adapt to changing priorities.
  
• Flexibility to work overtime or adjust schedules as required.
  

• Must maintain operational compliance with US and international regulatory agencies and guidelines (i.e. FDA, EU, HC, TGA, PIC/S, ISO, USP, NRC, cGMP, etc.).
• Work cross functionally to coordinate testing schedules and communications in support of the weekly production activities and ensure QC testing and maintenance activities are completed per requirements.
• Perform testing as assigned.
• Schedule and ensure testing of production, raw materials, components, stability, validation, and support of protocol/experimental samples.
• Verify, review, and make appropriate changes if needed, to any controlled document(s) pertinent to area of responsibility.
• Ensure team compliance with all policies, procedures, and site/company regulations.
• Support investigations of process or product failures and customer complaints. Author, and/or review all area quality and safety exceptions and investigation reports.
• Work safely with radioactivity and ensure all direct reports maintain radiological exposure to levels As Low As Reasonably Achievable (ALARA).
• Provide leadership for employees through effective communication, coaching, training and development and provide solutions for the success of the team.
• Conduct daily board meetings to update employees and track employee progress.
• Measure and communicate team progress against individual, team and site goals and Key Performance Indicators (KPI’s).
• Maintain and promote proper maintenance and cleanliness of the department areas of responsibility.
• Assure compliance with department training and qualification.

• Bachelor Degree in Chemistry, Science or related field required. Work experience is considered in lieu of degree.
• 10 or more years of relevant experience required with previous supervisory experience preferred. 
• Proficiency in cGMP laboratory testing and major laboratory instrumentation.
• Ability to interpret laboratory data and make sound compliance decisions based on such interpretations.
• Excellent communication and experience leading a team.

• Medical, Prescription, Dental & Vision Benefits (for employees working 20+ hours per week)
• Health Savings Account (HSA) (for employees working 20+ hours per week)
• Life & Disability Insurance (for employees working 20+ hours per week)
• MetLife Voluntary Benefits
• Employee Assistance Program (EAP)
• 401K Retirement Savings Plan
• Direct Deposit & weekly epayroll
• Referral Bonus Programs
• Certification and training opportunities

Note: Any pay ranges displayed are estimations. Actual pay is determined by an applicant's experience, technical expertise, and other qualifications as listed in the job description. All qualified applicants are welcome to apply.

Yoh, a Day & Zimmermann company, is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

Visit to contact us if you are an individual with a disability and require accommodation in the application process.

For California applicants, qualified applicants with arrest or conviction records will be considered for employment in accordance with the Los Angeles County Fair Chance Ordinance for Employers and the California Fair Chance Act. All of the material job duties described in this posting are job duties for which a criminal history may have a direct, adverse, and negative relationship potentially resulting in the withdrawal of a conditional offer of employment.

It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

By applying and submitting your resume, you authorize Yoh to review and reformat your resume to meet Yoh’s hiring clients’ preferences. To learn more about Yoh’s privacy practices, please see our Candidate Privacy Notice: