R Systems Jobs in Usa
14,666 positions found — Page 6
Job Description
At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.
Boeing Commercial Airplanes is excited to offer opportunities for an Assembler Installer Cable Controlled Systems to join our Joint and Installation team in Everett and Renton, Washington.
As an Assembler Installer for Cable Controlled Systems, you will be pivotal in ensuring the highest standards of quality and safety in the installation and assembly processes. Your expertise will be essential as you perform critical tasks such as reaming, riveting, and setting cable tensions using a tension meter, all while adhering to precise specifications. You will meticulously select and verify parts, ensuring they are free of defects and suitable for installation, while also utilizing blueprints and work orders to guide your work. Your attention to detail will be crucial as you clean surfaces, apply sealants, and conduct thorough inspections to confirm that all assemblies meet regulatory compliance and operational excellence.
You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.
Position Responsibilities:
Perform pickup, rework, authorized changes, and functional checks on work typically installed or assembled by lower classifications.
Use a tension meter to set cable tension according to specifications.
Conduct reaming and riveting as necessary to complete work assignments.
Report job handicaps, such as errors in parts, materials, or assembly procedures, following shop procedures.
Select appropriate parts, materials, and tools, and work with blueprints, assembly pages, and work orders to install and adjust cable-controlled systems in the aircraft.
Review bar charts or automated timelines to determine job assignments and obtain necessary drawings.
Locate work areas using drawings or paperwork that specify airplane and section numbers.
Verify kitted parts against installation plans and bill of materials to ensure they are correct and free of defects.
Obtain parts from the Parts Control Area if they are not pre-picked, ensuring they meet specifications.
Drill, ream, and countersink holes in parts/assemblies per specifications, using appropriate tools.
Disassemble parts and deburr holes to prepare for fastener installation.
Use solvents to clean surfaces prior to sealing or assembly, and apply sealants, alodine, primers, adhesives, and special finishes as required.
Install cable control pulleys and rig control cables according to drawings and specifications.
Check and adjust actuator motors for full travel of flight control systems using power sources and hand tools.
Clean the work area and ensure the removal of Foreign Object Debris (FOD) and submit completed jobs or in-process checks to inspectors as required.
Physical Demands and Potential Hazards:
Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.
Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.
Work in environments that may involve contact with metals, solvents, and coolants.
Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.
Adapt to varying noise levels and atmospheric conditions.
Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.
This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.
This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee.
Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.
Basic Qualifications:
Experience using hand tools and/or hand-held power tools
Experience working with safety and quality processes and procedures.
Basic Computer experience and competency.
Ability to walk constantly throughout the workday; stand 6-8 hours per day; climb or work from stairs/steps up to 8 hours per day; climb ladders; bend and twist frequently up to six hours per day; squat and kneel.
Able to perform work at heights up to 50 feet above ground level with appropriate safety gear.
Preferred Qualifications:
Experience reading and interpreting drawings, specifications,
material processes, schematic and diagrams
Attended a Boeing partnered manufacturing related high school or
Preferred community and technology college academic program
Typical Education & Experience:
High school graduate or GED preferred.
Relocation:
Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.
Drug Free Workplace:
Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.
Union Representation Statement:
This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.
Shift Work Statement:
This position is for a variety of shifts
Total Rewards & Pay Transparency:
At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.
The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.
The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.
Pay is based upon candidate experience and qualifications, as well as market and business considerations.
Summary pay range: $24.32 – $53.30
Applications for this position will be accepted until Sept. 04, 2026
Language Requirements
English Preferred
Relocation
Relocation assistance is not a negotiable benefit for this position.
Visa Sponsorship
Employer will not sponsor applicants for employment visa status.
Shift
This position is for variable shift
Equal Opportunity Employer:
Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
Job Description
At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.
Boeing Commercial Airplanes is excited to offer opportunities for an Electrical Systems- Assembler Installer to join our Joint and Installation team in Everett and Renton, Washington.
We are seeking a skilled Aircraft Electrical Systems Installer to join our dynamic team. In this role, you will be responsible for assembling and installing aircraft electrical systems, equipment, and accessories to meet stringent quality requirements. Your expertise will ensure that all electrical components are accurately located and installed, contributing to the overall safety and performance of our aircraft.
You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.
Position Responsibilities
Assemble and install aircraft electrical systems, equipment, and accessories in the airplane and/or specific sections, adhering to quality requirements.
Locate points, parts, holes, wire bundles, assemblies, etc., using previously established, marked, or generally known station lines or index points, deriving measurements and related information from electrical specifications and authorized sources.
Conduct continuity checks to ensure proper functionality of electrical systems.
Utilize prints, changes, schematic drawings, documents, position boards, assembly pages, photographs, makeup charts, work orders, and production illustrations to complete assigned tasks.
Execute any necessary pickups, authorized changes, and rework independently or on comparable work, often without the use of wire forming boards, jigs, fixtures, or tooling. Typically assigned work that has been previously sequenced.
Select appropriate parts, materials, tools, assemblies, and shields to effectively accomplish work assignments.
Report job handicaps, such as errors in sequencing, parts, materials, wire sizes and types, and assembly procedures, in accordance with shop procedures outlined by the supervisor.
Perform hand forming of electrical wiring and soldering as required to complete work assignments.
Carry out mechanical work when it is similar in complexity and incidental but necessary for the efficient completion of work assignments.
Execute necessary riveting tasks as part of the assembly process.
Physical Demands and Potential Hazards:
Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.
Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.
Work in environments that may involve contact with metals, solvents, and coolants.
Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.
Adapt to varying noise levels and atmospheric conditions.
Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.
This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.
This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee
Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.
Basic Qualifications
1+ years of experience in electrical assembly installation.
1+ years of experience with safety process and/or procedures in a manufacturing or operations environment (LOTO).
1+ years of experience handling chemicals and/or hazardous materials.
Ability to recognize colors.
Ability to work in confined spaces.
Ability to support frequent standing, walking, lifting, and working at heights with or without equipment assistance.
Proficiency in reading, writing, and speaking English.
Preferred Qualifications:
1+ years of experience as an Electrician or Apprentice.
Completion of an electrical trade school program or have military related electrical experience.
Enrolled in a Boeing partnered manufacturing related high school or community and technology college academic program.
Typical Education & Experience:
High school graduate or GED preferred.
Relocation:
Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.
Drug Free Workplace
Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.
Union Representation Statement:
This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.
Shift Work Statement:
This position is for a variety of shifts
Total Rewards & Pay Transparency:
At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.
The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.
The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.
Pay: $24.32/hour, with potential to earn up to $53.30/hour in accordance with the terms of the relevant collective bargaining agreement.
Applications for this position will be accepted until Jul. 09, 2026
Language Requirements
English Preferred
Relocation
Relocation assistance is not a negotiable benefit for this position.
Visa Sponsorship
Employer will not sponsor applicants for employment visa status.
Shift
This position is for variable shift
Equal Opportunity Employer:
Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
Job Description
At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.
The Boeing Company and Government Vehicle Health Management Systems (GVHMS) Team is currently looking for an Experienced Systems Engineer - Health Management (Product Owner) to join their team in Hazelwood, MO. This role will primarily support a Proprietary program as well as other platforms in the GVHMS portfolio as required.
This team develops, fields and supports aircraft support systems for the F/A-18, E/A-18, F-15, T7 and MQ-25 aircraft platforms. The system acquires and manages aircraft health and usage data, performs health and usage assessment, updates aircraft configuration and recommends maintenance actions. The team is looking for a highly motivated systems engineer to develop requirements, perform integration activities, manage project budget, and take on the role of Product Owner (PO) on various projects. This role requires interaction with internal and external stakeholders to ensure software products are developed that interact successfully to support customer needs. The ability to maintain and develop plans/schedules and to monitor and report schedule performance is required. Good oral and written communications are essential to success in this position. This role will work closely with the software development team, the software test team, other product owners, and the Chief Engineer on the team. This position will also require occasional domestic and international travel as required to ensure successful implementation of the system at customer sites.
Position Responsibilities:
Develop and maintain product roadmaps and system lifecycle plans.
Develop, document, and verify requirements.
Develop project schedules and track performance.
Develop and organize work items for the software team.
Be responsible for the integration of the components of the GVHMS system to successfully meet customer requirements.
Coordinate with the customer on a regular basis.
Document team plans and status, develop meeting agendas and presentations.
Analyze process compliance and actively work on improvements.
Basic Qualifications (Required Skills/Experience):
Bachelor of Science degree from an accredited course of study in engineering, engineering technology (includes manufacturing engineering technology), chemistry, physics, mathematics, data science, or computer science
3+ years of experience in systems engineering (requirements definition, allocation, verification, architecture design and trade design)
3+ years’ experience building stakeholder and customer relationships
3+ years of experience in leading projects or teams
Preferred Qualifications (Desired Skills/Experience):
Agile development experience
Excellent communication skills and ability to lead by influence
Experience with Model Based Systems Engineering (MBSE)
Experience with Earned Value Management (EVM)
Travel: 10%. Must have the ability to travel domestically or internationally.
Drug Free Workplace:
Boeing is a Drug Free Workplace (DFW) where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.
Pay & Benefits:
At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.
The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.
The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.
Pay is based upon candidate experience and qualifications, as well as market and business considerations.
Summary Pay Range: $107,100 - $144,900
Applications for this position will be accepted until Apr. 01, 2026
Export Control Requirements:
This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a “U.S. Person” as defined by 22 C.F.R. §120.62 is required. “U.S. Person” includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee.
Export Control Details:
US based job, US Person required
Education
Bachelor's Degree or Equivalent Required
Relocation
This position offers relocation based on candidate eligibility.
Security Clearance
This position requires the ability to obtain a U.S. Security Clearance for which the U.S. Government requires U.S. Citizenship. An interim U.S. Secret Clearance Pre-Start and final U.S. Secret Clearance Post-Start is required.
Visa Sponsorship
Employer will not sponsor applicants for employment visa status.
Shift
This position is for 1st shift
Equal Opportunity Employer:
Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
Job Description
At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.
Boeing Defense, Space & Security (BDS) Air Dominance has an exciting opportunity for an Experienced Vehicle Management System (VMS) Requirements Engineer to join the VMS Requirements team located in Hazelwood, MO.
Propelled by a team with an innovative spirit that transcends cultures, BDS Air Dominance delivers decisive mission advantages through cutting-edge capabilities and supports design, manufacturing, and services for a broad portfolio of military aircraft. These roles will support new product design, development, integration, and flight test for the expanding Air Dominance portfolio, including the newly awarded F-47.
Join the VMS Requirements team to work across disciplines and help us design elements of the VMS Software Application. You will collaborate with our hardware, software, and labs teams to implement and test your designs. Guidance, Navigation and Control (GNC), Electrical, Mechanical, Aerodynamics, and other engineers are all welcome – to succeed in this role, you will need to leverage your area of expertise and quickly learn on the job about other areas to develop capabilities for our Vehicle Management System Computer. You will get to see tangible results of your efforts as you contribute to an exciting new aircraft development program in the St. Louis area.
Boeing is the world's largest aerospace company. We are engineers and technicians. Skilled scientists and thinkers. Bold innovators and dreamers. Join us, and you can build something better for yourself, for our customers, and for the world.
Position Responsibilities:
Develop software requirements and design for a Vehicle Management System (VMS)
Apply model-based system engineering techniques to design and verify system requirements
Interpret requirements to formulate and test mathematical models
Work with subject matter experts, design solutions for a variety of capabilities such as airplane subsystems (i.e. actuation), signal processing, redundancy management, system monitoring, and controls
Coordinate and integrate requirements across engineering disciplines
Verify and validate software against designed requirements in virtual and hardware test environments
Conduct analysis to support certification of a Vehicle Management System
Basic Qualifications (Required Skills/Experience):
Bachelor of Science degree in Engineering, Engineering Technology (including Manufacturing Technology), Computer Science, Data Science, Mathematics, Physics, Chemistry or non-US equivalent qualifications directly related to the work statement
5 or more years' related work experience or an equivalent combination of technical education and experience
Preferred Qualifications (Desired Skills/Experience):
Engineering experience with Vehicle Management Systems
Experience with modeling and simulation
Experience in Matlab/Simulink/Stateflow
Experience with software requirements, software design, hardware/software integration and testing
Knowledge of VMS design activities (HW/SW design, integration, modeling, and test procedure development)
Knowledge of air vehicle subsystems control architecture
Knowledge of air vehicle flight control systems
Experience with Microsoft Visio, Clearcase, C++, C#, Visual Studio, Python
An active Secret clearance is highly desirable
Drug Free Workplace:
Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.
At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.
The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.
The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.
Pay is based upon candidate experience and qualifications, as well as market and business considerations.
Summary pay range: $115,600 – 156,400
Applications for this position will be accepted until Apr. 06, 2026
Export Control Requirements:
This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a “U.S. Person” as defined by 22 C.F.R. §120.62 is required. “U.S. Person” includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee.
Export Control Details:
US based job, US Person required
Education
Bachelor's Degree or Equivalent Required
Relocation
This position offers relocation based on candidate eligibility.
Security Clearance
This position requires the ability to obtain a U.S. Security Clearance for which the U.S. Government requires U.S. Citizenship. An interim and/or final U.S. Secret Clearance Post-Start is required. This position requires ability to obtain program access, for which the U.S. Government requires U.S. Citizenship only.
Visa Sponsorship
Employer will not sponsor applicants for employment visa status.
Shift
This position is for 1st shift
Equal Opportunity Employer:
Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
Job Description
At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.
The Boeing Company is looking for Missions Systems Software Engineers – Embedded to join the Boeing’s Mission Systems Software team in Berkeley, Missouri. This position is hiring for multiple levels including; Associate Level, Experienced Level, and Senior Level.
This role is looking to hire software engineers capable of working in a collaborative integrated product team environment helping to implement various features of safety critical and/or mission critical flight software. This role will provide engineers experience in all phases of the software development life-cycle from requirements decomposition, architecture definition, algorithm development, software development, testing including Hardware in the Loop, and documentation. The software engineers will develop software in a Continuous Integration / Continuous Deployment (CI/CD) software build pipeline using an agile methodology focused on code quality, security and automation.
Key Capability areas of interest include:
Sensor Fusion
Mission Management
Resource Management
Fire Control and Weapons engagement
Mission Processing
Stores Management
Tactical Communications
3rd Party Software Integration
Development Security Operations (DevSecOps)
Contribute to all phases of the software development lifecycle (requirements, architecture, implementation, documentation, verification) in one of the following capability areas (Fusion, Fire Control, Mission Management, Resource Management, Tactical Communications, Supplier Integration, DevSecOps) Work within an Agile integrated product team working across software, analysis integration and test, sensors, and system test engineers. More senior level engineers will be expected to develop technical product plans, lead and mentor younger engineers, be a face for communication with senior leadership and government counterparts.
Position Responsibilities:
Designs, develops, tests, debugs and maintains software that is integrated into embedded devices and systems and meets industry, customer, safety and regulation standards
Reviews, analyzes, and translates customer requirements into the design of software products for embedded devices and systems
Builds and writes code for embedded systems software to run on specific specialized hardware.
Integrates embedded software with hardware components
Analyzes, monitors and improves the efficiency and stability of embedded software systems.
Tests and debugs software for embedded devices and systems.
Implements current and emerging technologies, tools, frameworks, and changes in regulations relevant to software development and hardware technologies.
Advises on software and hardware integration domains.
Tracks and evaluates internal and supplier software team performance to ensure product and process compliance to project plans and industry standards.
Performs embedded software project management functions.
This position requires the ability to obtain a U.S. Security Clearance for which the US Government requires U.S. Citizenship. Ability to obtain U.S. Security clearance (post-start).
Basic Qualifications (Required Skills/ Experience):
2+ years of experience programming with Go, Java, C/C++, Rust, or Python
Experience in systems integration with systems engineering processes and procedures
Strong verbal and written skills, teaming skills, technical skills, and integration skills
Preferred Qualifications (Desired Skills/Experience):
5 or more years’ related work experience or an equivalent combination of education experience
9 or more years’ related work experience or an equivalent combination of education experience
Bachelor's degree or higher in Computer Science or Engineering related field
Experience with Continuous Integration / Continuous Deployment (CI/CD) software build pipeline techniques and software factories such as DevOps & DevSecOps
Experience debugging and troubleshooting technical problems involving computer memory or timing considerations
Experience or familiarity with industry tools or development techniques such as the following; Embedded System Software, C, C++, Rust, Linux, VxWorks, Containers, Git, CI/CD DevSecOps, and/or Cameo
Drug Free Workplace:
Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.
CodeVue Coding Challenge:
To be considered for this position you will be required to complete a technical assessment as part of the selection process. Failure to complete the assessment will remove you from consideration.
Total Rewards & Pay Transparency:
At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.
The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.
The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.
Pay is based upon candidate experience and qualifications, as well as market and business considerations.
Summary pay range for Associate Level: $99,450 - $134,550
Summary pay range for Experienced Level: $126,650 - $171,350
Summary pay range for Senior Level: $160,650 - $217,350
Applications for this position will be accepted until Mar. 26, 2026
Export Control Requirements:
This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a “U.S. Person” as defined by 22 C.F.R. §120.62 is required. “U.S. Person” includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee.
Export Control Details:
US based job, US Person required
Relocation
This position offers relocation based on candidate eligibility.
Security Clearance
This position requires the ability to obtain a U.S. Security Clearance for which the U.S. Government requires U.S. Citizenship. An interim and/or final U.S. Secret Clearance Post-Start is required.
Visa Sponsorship
Employer will not sponsor applicants for employment visa status.
Shift
This position is for 1st shift
Equal Opportunity Employer:
Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
Job Description
At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.
The Boeing Company has an exciting opportunity for a Senior Design & Analysis Engineer to become part of Boeing Test & Evaluation (BT&E) Vehicle Management System (VMS) team in Berkeley, MO or Hazelwood, MO.
You will enable the VMS organization to continue to advance its technologies in support of our Phantom Works and Fixed-Wing programs. The team is responsible for developing integration test assets, real-time software test environments, subsystem/system testing, and evaluating system performance in simulation lab environment. Simulation and modeling are utilized to assist in requirements development, software and hardware development, and equipment verification and validation.
Position Responsibilities:
Lead major design activities for hardware/software products
Mentor junior engineers in design practices and processes; oversee the quality of their work products
Develop architectures for test systems
Select components for hardware designs and support the procurement and fabrication of hardware designs
Integrate hardware systems and/or software together in a test setting
Operate complex test stations, electronic test equipment, and test software
Test and validate to ensure system designs meet operational and functional requirements
Solve problems concerning fielded hardware and software over the entire product lifecycle
Interface with programs/customers in developing requirements, in establishing statements of work, and in providing status and performance
Develop estimates for new work by gathering data from other BT&E partners and from team actuals
Develop detailed schedules and drive team performance to meet schedules
Basic Qualifications (Required Skills/Experience):
Bachelor of Science degree in Engineering (with a focus in Electrical, Mechanical or Aeronautical), Computer Science, Data Science, Mathematics, Physics, Chemistry or non-US equivalent qualifications directly related to the work statement
9 years of experience with avionics testing and integration
3 years of experience with test station design or test system design
3 years of experience with the development of Flight Controls or Flight Controls Systems such as Flight Control Computers/Vehicle Management System Computers, Actuators, Air Data Probes, and Navigation Systems
Experience preparing test plans, writing test procedures, and performing tests to gather artifacts
Preferred Qualifications (Desired Skills/Experience):
9 years of experience designing and integrating Flight Controls or Flight Controls Systems
3 years experience leading other engineers in major projects
Experience with MATLAB, Simulink, and/or real-time operating systems
Experience with software programming and creating scripts for automated testing
Experience with MIL-HDBK-516C
Drug Free Workplace:
Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.
Pay & Benefits:
At Boeing, we strive to deliver a Total Rewards package that will attract, engage, and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.
The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.
The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.
Pay is based upon candidate experience and qualifications, as well as market and business considerations.
Summary pay range: $129,200 - $174,800
Applications for this position will be accepted until Mar. 26, 2026
Export Control Requirements:
This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a “U.S. Person” as defined by 22 C.F.R. §120.62 is required. “U.S. Person” includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee.
Export Control Details:
US based job, US Person required
Education
Bachelor's Degree or Equivalent Required
Relocation
This position offers relocation based on candidate eligibility.
Security Clearance
This position requires an active U.S. Secret Security Clearance (U.S. Citizenship Required). (A U.S. Security Clearance that has been active in the past 24 months is considered active)
Visa Sponsorship
Employer will not sponsor applicants for employment visa status.
Shift
This position is for 1st shift
Equal Opportunity Employer:
Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
Job Description
At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.
Boeing Defense, Space & Security (BDS) is looking for a LeadMechanical Systems Design & Analysis Engineer to join our team Phantom Works teams in Hazelwood, MO.
Phantom Works programs develop complex, highly integrated, advanced systems, enabling future growth for Boeing and our Department of Defense (DoD) Customers. Individuals that aspire to lead technical teams, drive innovation, and take action to solve challenging problems, while shaping the future are ideal candidates for this position. If you thrive in a fast-paced culture, eagerly take action, set high standards for yourself, passionately honor commitments, strive to be the best and deliver results to achieve the unthinkable- this role is for you!
Position Responsibilities:
- Lead and provide technical quality review of the development and documentation of mechanical and fluid systems and thermal environment to establish the system design
- Lead activities to validate and verify mechanical and fluid systems requirements
- Lead the development, maintenance or modification of system components' designs/proposals to provide installation and detail documentation
- Perform and document analyses
- Manage supplier development, test and production activities and direct the supplier to optimize integration and achieve program goals
- Prioritize, delegate and track performance and documentation of analyses of mechanisms/landing gear/ordnance components and systems selecting appropriate methods to validate or assess the design
- Support proposal preparation and new business development efforts
- Train and coach others
- Work under minimal direction
This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.
This position requires an active U.S. Secret Security Clearance (U.S. Citizenship Required). (A U.S. Security Clearance that has been active in the past 24 months is considered active
This position requires ability to obtain Special Program Access, for which the U.S. Government requires U.S. Citizenship only.
Basic Qualifications (Required Skills/Experience):
- Bachelor of Science degree in Engineering (with a focus on Mechanical, Civil, Aerospace Aeronautical or Material Sciences)
- 14 or more years' related work experience or an equivalent combination of technical education and experience
- Experience with Model Based Engineering tools (NX, NX motion, Teamcenter, Hyperworks, MSOSA or equivalent)
- Experience with development and integration of Armament related hardware on Military Aircraft including pneumatic suspension and release equipment, pyrotechnic suspension and release equipment, pneumatic systems, compressors, and pylons
- Experience with integration of weapons, pods and external fuel tanks on Military Aircraft
- Experience with supplier developments and procurements including development of procurement specifications, technical evaluation of supplier proposals, technical coordination with suppliers, and supplier component qualification
Relocation:
This position offers relocation based on candidate eligibility.
Drug Free Workplace:
Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.
At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.
The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.
The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.
Pay is based upon candidate experience and qualifications, as well as market and business considerations.
Summary pay range:$154,700 - $209,300
Applications for this position will be accepted until Mar. 26, 2026
Export Control Requirements:
This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a “U.S. Person” as defined by 22 C.F.R. §120.62 is required. “U.S. Person” includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee.
Export Control Details:
US based job, US Person required
Education
Bachelor's Degree or Equivalent Required
Relocation
This position offers relocation based on candidate eligibility.
Security Clearance
This position requires an active U.S. Secret Security Clearance (U.S. Citizenship Required). (A U.S. Security Clearance that has been active in the past 24 months is considered active) This position requires ability to obtain program access, for which the U.S. Government requires U.S. Citizenship only.
Visa Sponsorship
Employer will not sponsor applicants for employment visa status.
Shift
This position is for 1st shift
Equal Opportunity Employer:
Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
Job Description
At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.
BDS is a global leader in the development, production, maintenance and enhancement of fixed-wing and rotary wing aircraft, commercial and government satellites, human spaceflight programs and weapons. Key markets include aeronautics, space and weapons. Core capabilities are in development, production and mission enabling upgrades of integrated solutions. BDS delivers the most digitally advanced, simply and efficiently produced and intelligently supported solutions to its customers.
Position Responsibilities:
- Overall subject matter expert and technical lead engineer for the Mission and Safety Computers hardware for requirements development, avionics subsystem and system design, integration, subsystem/system/flight test, system verification, production/fielding, and supplier oversight
- Lead the hardware supplier design team in supporting all Tactical Fighters program needs
- Develop interface control documents describing mechanical, electrical, and software interfaces
- Perform technical problem investigation and resolution at subsystem, system, and platform integration levels
- Perform weapon capability development, implementation, and integration onto a fighter’s platform
- Out brief status to internal Boeing stakeholders/leadership and external customers
- Support subsystem testing on the Mission Systems Hardware
- Support system testing in ESIL and during Flight Test
- Support Safety Critical Functional Thread Analysis efforts for the Mission Systems Hardware
- Support airworthiness efforts for hardware design, development and implementation
Basic Qualifications (Required Skills and Experience):
- Bachelor of Science degree in Engineering (with a focus in Electrical, Mechanical or Aeronautical), Computer Science, Data Science, Mathematics, Physics, Chemistry or non-US equivalent qualifications directly related to the work statement
- Level 4: 9+ years of work-related experience with a Bachelor’s degree OR 7+ years of work-related experience with a Masters OR 3+ years of work-related experience with a PhD
- Knowledge of Military Standards/Handbook implementations – MIL-STD-810, MIL-STD-704, MIL-STD-461, etc.
- Experience with electrical schematics, wiring diagrams, functional diagrams
- Tactical Fighters platform knowledge, including subsystem and platform integration
- Experience mentoring, coaching and leading technical projects and teams
Preferred Qualifications (Desired Skills and Experience):
- Knowledge of Core Processing, Image/Display/Video Processing, Built-In Test Requirements, and Safety Computing
- Knowledge of Circuit Card Assembly design, fabrication, and verification
- Knowledge of avionics box interfaces – MIL-STD-1553, Serial buses, RS-170/RS-422/RS-232, hardware discrete, fiber/ethernet
- Knowledge of avionics quality inspection and acceptance processes
- Knowledge of Software Requirements, Software Environments, and Platform Operational Flight Program development
- Experience working closely with United States Government and aircrew
- Tools/application familiarity – DOORS, MSOSA/Cameo, Teamcenter, MS Office & Project, etc.
This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.
Conflict of Interest:
Successful candidates for this job must satisfy the Company’s Conflict of Interest (COI) assessment process.
Shift:
This position is for 1st Shift
Relocation:
This position offers relocation based on candidate eligibility. Note: Basic relocation will be offered for eligible internal candidates.
Drug Free Workplace:
Boeing is a Drug Free Workplace (DFW) where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.
Pay & Benefits:
At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.
The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.
The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.
The Boeing 401(k) helps you save for your future, with contributions from Boeing that can help you grow your retirement savings. Our best-in-class retirement benefit features:
- Best in class 401(k) plan: we'll match your contributions dollar for dollar, up to 10% of eligible pay with Immediate 100% vesting
- Student Loan Match: The Boeing 401(k) Student Loan Match allows eligible enrolled U.S. employees to have their qualified student loan debt payments counted, along with any match-eligible contributions they make, for purposes of determining the Company Match to employees' Boeing 401(k) accounts.
Pay is based upon candidate experience and qualifications, as well as market and business considerations.
Summary pay range: $129,200-174,800
Applications for this position will be accepted until Mar. 27, 2026
Export Control Requirements:
This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a “U.S. Person” as defined by 22 C.F.R. §120.62 is required. “U.S. Person” includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee.
Export Control Details:
US based job, US Person required
Education
Bachelor's Degree or Equivalent Required
Relocation
This position offers relocation based on candidate eligibility.
Security Clearance
This position requires the ability to obtain a U.S. Security Clearance for which the U.S. Government requires U.S. Citizenship. An interim and/or final U.S. Secret Clearance Post-Start is required. This position requires ability to obtain program access, for which the U.S. Government requires U.S. Citizenship only.
Visa Sponsorship
Employer will not sponsor applicants for employment visa status.
Shift
This position is for 1st shift
Equal Opportunity Employer:
Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
Job Description
At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.
Boeing Defense, Space & Security (BDS) Air Dominance has an exciting opportunity for an Associate Vehicle Management System (VMS) Requirements Engineer to join the VMS Requirements team located in Hazelwood, MO.
.
Propelled by a team with an innovative spirit that transcends cultures, BDS Air Dominance delivers decisive mission advantages through cutting-edge capabilities and supports design, manufacturing, and services for a broad portfolio of military aircraft. These roles will support new product design, development, integration, and flight test for the expanding Air Dominance portfolio, including the newly awarded F-47.
Join the VMS Requirements team to work across disciplines and help us design elements of the VMS Software Application. You will collaborate with our hardware, software, and labs teams to implement and test your designs. Guidance, Navigation and Control (GNC), Electrical, Mechanical, Aerodynamics, and other engineers are all welcome – to succeed in this role, you will need to leverage your area of expertise and quickly learn on the job about other areas to develop capabilities for our Vehicle Management System Computer. You will get to see tangible results of your efforts as you contribute to an exciting new aircraft development program in the St. Louis area.
Boeing is the world's largest aerospace company. We are engineers and technicians. Skilled scientists and thinkers. Bold innovators and dreamers. Join us, and you can build something better for yourself, for our customers, and for the world.
Position Responsibilities:
Develop software requirements and design for a Vehicle Management System (VMS)
Apply model-based system engineering techniques to design and verify system requirements
Interpret requirements to formulate and test mathematical models
Work with subject matter experts, design solutions for a variety of capabilities such as airplane subsystems (i.e. actuation), signal processing, redundancy management, system monitoring, and controls
Coordinate and integrate requirements across engineering disciplines
Verify and validate software against designed requirements in virtual and hardware test environments
Conduct analysis to support certification of a Vehicle Management System
Basic Qualifications (Required Skills/Experience):
Bachelor of Science degree in Engineering, Engineering Technology (including Manufacturing Technology), Computer Science, Data Science, Mathematics, Physics, Chemistry or non-US equivalent qualifications directly related to the work statement
2 or more years' related work experience or an equivalent combination of technical education and experience
This position requires the ability to obtain a U.S. Security Clearance for which the U.S. Government requires U.S. Citizenship. An interim and/or final U.S. Secret Clearance Post-Start is required. This position requires ability to obtain program access, for which the U.S. Government requires U.S. Citizenship only.
Preferred Qualifications (Desired Skills/Experience):
Engineering experience with Vehicle Management Systems
Experience with modeling and simulation
Experience in Matlab/Simulink/Stateflow
Experience with software requirements, software design, hardware/software integration and testing
Knowledge of VMS design activities (HW/SW design, integration, modeling, and test procedure development)
Knowledge of air vehicle subsystems control architecture
Knowledge of air vehicle flight control systems
Experience with Microsoft Visio, Clearcase, C++, C#, Visual Studio, Python
An active Secret clearance is highly desirable
Drug Free Workplace:
Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.
At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.
The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.
The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.
Pay is based upon candidate experience and qualifications, as well as market and business considerations.
Summary pay range: $93,500 - $126,500
Applications for this position will be accepted until Mar. 20, 2026
Export Control Requirements:
This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a “U.S. Person” as defined by 22 C.F.R. §120.62 is required. “U.S. Person” includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee.
Export Control Details:
US based job, US Person required
Education
Bachelor's Degree or Equivalent Required
Relocation
This position offers relocation based on candidate eligibility.
Security Clearance
This position requires the ability to obtain a U.S. Security Clearance for which the U.S. Government requires U.S. Citizenship. An interim and/or final U.S. Secret Clearance Post-Start is required. This position requires ability to obtain program access, for which the U.S. Government requires U.S. Citizenship only.
Visa Sponsorship
Employer will not sponsor applicants for employment visa status.
Shift
This position is for 1st shift
Equal Opportunity Employer:
Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
Job Description
At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.
Boeing Defense, Space & Security (BDS) is seeking a Lead Model-Based Systems Engineer (Level 4) to join the Systems Engineering Integration & Test (SEIT) Team in Berkeley, MO.
Boeing Phantom Works is building the next generation of combat aircraft and the required infrastructure to test and validate designs; we’re looking for enthusiastic systems engineers to join us on that journey. As part of the Electromagnetic Verification Facility (EMVF) team you’ll provide engineering leadership to a team comprised of multiple skill areas, develop statements of work (SOW), work with customers and management, manage changes to the SOW and conduct impact analysis, and provide technical, business, and integration leadership for the development and execution of the program.
Join a multidisciplinary team where you’ll shape system requirements, guide integration and verification activities, and influence architecture that must meet operational needs. If you want to solve hard problems, accelerate innovation in autonomy and teaming, and contribute to a program that matters, the EMVF team at Boeing Phantom Works is the place to make a measurable impact.
Position Responsibilities
- Support/lead system architecture development and decomposition using MBSE (SysML/Cameo) to define interfaces, functions, and allocation across multiple domains
- Maintain alignment within the EMVF team and with our suppliers and customers; identify obstacles and work as a team to remove them.
- Support/lead the program in implementing MBSE as part of the broader digital engineering ecosystem
- Support/lead development and provide quality review for EVMF deliverables in collaboration with other engineering teams.
- Support management in maintaining cost, schedule, risks, issues, opportunities, and technical baselines for the EVMF effort, and support identification, tracking and proactive management of metrics for program execution and product performance.
Travel may be required up to 10% of the time; Domestically and/or internationally depending on business needs.
This position requires an active U.S. Secret Security Clearance (U.S. Citizenship Required). (A U.S. Security Clearance that has been active in the past 24 months is considered active)
Basic Qualifications (Required Skills/Experience)
- Bachelor of Science degree from an accredited course of study in engineering, engineering technology (including manufacturing engineering technology), chemistry, physics, mathematics, data science, or computer science
- 7+ years related work experience or an equivalent combination of technical education and experience
- Experience with one of the following:
- Planning and execution of verification certification or acceptance test efforts (lab, ground and/or flight tests)
- Decomposition of Government or customer standards, development of certification or integrity plans, execution of verification/certification programs
- Development of deliverables requiring coordination across multiple engineering disciplines
- Prior Systems Engineering experience to include but not limited to system design, functional decomposition, requirements development, analysis, verification, and validation
- Experience with MBSE, Cameo/MSOSA, and/or SysML
Preferred Qualifications (Desired Skills/Experience)
- Experience developing and/or managing program baselines
- Demonstrated experience developing system architectures for complex aerospace vehicles or subsystems using MBSE (SysML/MSOSA)
- Performing or closely supporting development of architecture, requirements and verification for RF systems (Communications, radar, electromagnetic environmental effects (E3), etc.) or RF test systems/facilities.
- Prior leadership in system architecture or lead systems engineering roles; experience communicating architectural tradeoffs to stakeholders and customers
- Understanding of various engineering analyses, including affordability, safety, reliability, maintainability, testability, human systems integration, survivability, vulnerability, susceptibility, system security, regulatory, certification, product assurance and other specialties quality factors into a preferred configuration to ensure mission success
- Background systems engineering processes such as RIO and TPM management, technical review planning/execution, etc.
Conflict of Interest
Successful candidates for this job must satisfy the Company’s Conflict of Interest (COI) assessment process.
Drug Free Workplace
Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.
Employee Referral
Referral to this job is eligible for bonus to qualifying candidates.
Total Rewards
At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.
The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.
The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.
The Boeing 401(k) helps you save for your future, with contributions from Boeing that can help you grow your retirement savings. Our best-in-class retirement benefit features:
- Best in class 401(k) plan: we'll match your contributions dollar for dollar, up to 10% of eligible pay with Immediate 100% vesting
- Student Loan Match: The Boeing 401(k) Student Loan Match allows eligible enrolled U.S. employees to have their qualified student loan debt payments counted, along with any match-eligible contributions they make, for purposes of determining the Company Match to employees' Boeing 401(k) accounts.
Pay is based upon candidate experience and qualifications, as well as market and business considerations. Summary pay range: $136,850 – $185,150
Applications for this position will be accepted until Mar. 25, 2026
Export Control Requirements:
This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a “U.S. Person” as defined by 22 C.F.R. §120.62 is required. “U.S. Person” includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee.
Export Control Details:
US based job, US Person required
Education
Bachelor's Degree or Equivalent Required
Relocation
This position offers relocation based on candidate eligibility.
Security Clearance
This position requires an active U.S. Secret Security Clearance (U.S. Citizenship Required). (A U.S. Security Clearance that has been active in the past 24 months is considered active)
Visa Sponsorship
Employer will not sponsor applicants for employment visa status.
Shift
This position is for 1st shift
Equal Opportunity Employer:
Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
