Quadrants Trigonometry Jobs in Usa
84 positions found — Page 5
Since 1969, we've led the industry in developing innovative technologies for recycling scrap into high-quality steels that are all around us, from bridges and buildings to cars and appliances.
Basic Job Functions: Kirby Building Systems is seeking to assemble a hiring pool of qualified applicants for the position of Steel Detailer/BIM Modeler at our Portland, TN facility.
As Steel Detailer / BIM Modeler, you will be responsible for detailing all components of a custom metal building system including the primary steel framing, secondary steel framing, wall panel systems, roof panel systems, and all associated flashings and trims to ensure all components fit together correctly as part of a complete design solution.
Safety is the most important part of all jobs within Nucor; therefore, candidates must be able to demonstrate the ability to initiate, lead, and uphold safety policies, practices, procedures, and housekeeping standards at all times.
These responsibilities include but are not limited to creating: Electronic 3D models of custom-building systems using 3D drafting software Shop drawings and reports for in-house fabrication and production teams Erection drawings and bill of materials for field construction use Safety is the most important part of all jobs within Nucor; therefore, candidates must be able to demonstrate the ability to initiate, lead, and uphold safety policies, practices, procedures, and housekeeping standards at all times.
Minimum Qualifications: High School Diploma or GED Basic math, geometry, and trigonometry skills 2 years metal building detailing experience Experience operating CAD software.
Experience with Tekla Structures or similar 3D modeling software.
Candidates must be legally authorized to work in the US (NUCOR will not sponsor the need for a visa now or in the future) Preferred Qualifications: Minimum Associates degree or two-year vocational school certification with a focus in Architecture, Drafting, Construction Management, or Engineering Technology.
About Us: Nucor Buildings Group (NBG), a proud Nucor product group, is one of North America’s largest and most experienced manufacturers of metal building systems.
With multiple locations throughout the United States, NBG is proud to design world-class building solutions tailored to meet the needs of any market including commercial, industrial, agricultural, and institutional.
Our brands include American Buildings, CBC Steel Buildings, Kirby Building Systems, and Nucor Building Systems.
NBG offers work/life balance and a variety of benefits and performance incentives.
We take pride in connecting teammates to meaningful work and focus heavily on both personal and professional development.
Whether your background is in engineering and design, information technology and software development, marketing, or sales, with Nucor Buildings Group you can go as far as your drive and ambition will take you.
Why Nucor? When you join Nucor, America’s largest steel manufacturer and recycler, you’ll help create a variety of steel products that become so much more, for so many people.
And you won’t do it alone.
Our supportive culture builds each other up, values family, relationships, and puts safety above anything else.
With the freedom to take your ideas to the next level, there’s no end to what you can achieve.
This is your chance to build a lifelong career, give back to your community, make the world a better place – and BE PART OF SOMETHING BIGGER.
Job Security – Benefits – Bonus Programs With performance-based compensation, profit sharing, and a no-layoff practice, we take care of our teammates who design, engineer, fabricate, and support the products that define our company.
Join us in driving success and shaping the future of our division.
Apply now and become an integral part of our team!
Salary: $28
- $34 per hour A bit about us: Our client is a privately-held global leader in manufacturing of fluid power products serving a wide range of industrial and automotive/off-highway applications.
Why join us? PTO Paid Holidays Medical, dental, vision 401K with company match Growth opportunities Custom small batch and shorter cycle times.
No micromanagement Job Details CNC Lathe Set‑Up Machinist – 1st Shift Shift: 1st shift, typically 7:00 AM – 3:00 PM, will consider someone on 2nd shift Compensation: $28-$34/hr depending on experience Benefits: Comprehensive benefits package including healthcare options, paid time off, 401k with match, yearly raises, and other employee‑support programs A well‑established manufacturing organization is seeking a CNC Lathe Set-Up Machinist to support precision machining operations in a modern, team‑oriented environment.
The company focuses on delivering high‑quality components and engineered solutions while maintaining a commitment to safety and environmental responsibility.
Key Responsibilities Conversational programming, Develop, modify, and maintain programs Set up, troubleshoot, and operate 5-axis lathes with live tooling, and if needed, a 5-axis mill with live tooling Review engineering drawings and determine tooling, operations, and workflow sequence.
Conduct simulations and test runs to validate programs before production.
Perform first‑article inspections and ongoing quality checks throughout the manufacturing process.
Estimate machining time and resources needed for jobs.
Collaborate with Production, Engineering, and Quality teams to ensure smooth workflow.
Maintain documentation related to programs, setups, and process improvements.
Ensure machines are producing parts consistently, efficiently, and within specification.
Qualifications Must have experience with programming (conversational), setting up, and operating 5-axis CNC lathes with live tooling (or 6-axis) Reading and interpreting prints for custom parts, and performing first piece quality inspection Ability to interpret complex technical drawings and 3D models.
Solid understanding of machining principles, tooling, and metalworking processes.
Strong math skills, including algebra and trigonometry.
Excellent problem‑solving skills and the ability to think strategically about workflow.
Effective communication skills and strong attention to detail.
Mechanically inclined with experience in a machine shop environment.
Strong organizational and time‑management abilities.
Education & Experience High school diploma or equivalent required.
Technical certification or degree in CNC programming, machining technology, mechanical technology, or a related field preferred.
Experience with CNC program creation, machine setup, and multi‑axis machining operations.
Knowledge of machine tools, electronics, and shop safety practices.
Interested in hearing more? Easy Apply now by clicking the "Apply Now" button.
Jobot is an Equal Opportunity Employer.
We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws.
Jobot also prohibits harassment of applicants or employees based on any of these protected categories.
It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions.
Sometimes Jobot is required to perform background checks with your authorization.
Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance.
Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at /legal.
By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners.
Frequency varies for text messages.
Message and data rates may apply.
Carriers are not liable for delayed or undelivered messages.
You can reply STOP to cancel and HELP for help.
You can access our privacy policy here: /privacy-policy
Colorectal Surgery- Nurse Practitioner/Physician Assistant- Augusta
Description:
JOB PURPOSE: Serves as a member of a surgical service line team by assisting in management of post-operative and critically ill patients in the hospital, as well as evaluating pre and post-operative patients in the office setting. Applies specialized skills and knowledge related to the care of patients in the CVOR, ICU, CCU and CVICU areas. Contributes to excellence in patient care, research, teaching, consulting and provides leadership to the organization.
KEY RESPONSIBILITIES: 1. Provides direct clinical services for pre-operative and post-operative patients, within institutional guidelines and utilizing evidence-based clinical practice standards under the supervision of the patients physician. 2. Obtains patient health histories and complete physical examinations and documents findings in accordance with hospital requirements. 3. Orders appropriate diagnostic and laboratory tests, explaining the necessity, preparation, nature and anticipated effects of procedure(s) to patients, patients family, staff and healthcare learners. 4. Performs approved therapeutic or diagnostic procedures based upon patients clinical status and documents procedures in accordance with hospital requirements, including obtaining arterial, venous, and capillary blood samples, urine samples, sputum samples and cultures; performing cardiac output measurements, other hemodynamic measurements and EKGs; assisting with the performance of radiographic studies; assisting physician with diagnostic and therapeutic procedures; etc. 5. Performs cardiopulmonary resuscitation and external cardiac massage; airway management including bag and mask ventilation, endotracheal intubation and extubation, changing, positioning and repositioning endotracheal tubes; administration of life supporting drugs according to established protocols; and defibrillation according to Advanced Cardiac Life Support standards. 6. Under physician direction and within the credentialing standards of the Hospital, manages arterial catheters, central venous catheters, pulmonary artery catheters, temporary pacemakers, intra-aortic balloon pump catheters and chest tube placement, management, and removal. 7. Interfaces patients with monitoring and instrumentation equipment, and directs and educates others in performing the same functions. 8. Formulates and implements a treatment plan for acute illness management in collaboration with the designated primary supervising physician and/or attending back-up physician(s) and documents in medical records and appropriate narrative summaries. 9. Assesses patients for changes in status and institutes appropriate interventions, including initiation of necessary emergency interventions to stabilize patient. 10. Incorporates clinical research findings in the development and implementation of standards of care. 11. Supports IRB approved clinical research/trials though a variety of activities including but not limited to: obtaining consent; ordering diagnostic tests; recording laboratory and diagnostic results; administering therapeutic interventions; and documenting and reporting patient outcomes including toxicities or adverse events. 12. Participates and assists with the pre-, peri-, and postoperative management of the surgical patients in the OR and ICUs. This includes minimally invasive vein harvest, thoracoscopy, and Robotic assisted surgeries. 13. Performs and participates in quality/performance improvement activities and clinical research. 14. Serves as a clinical expert and education consultant to nursing, members of the healthcare team and to the larger community. 15. Identifies educational needs of the family and participates in teaching opportunities. 16. Assesses educational needs, plan, provide, and evaluate educational programs for nursing staff, interdisciplinary healthcare team, and community. KNOWLEDGE, SKILLS, ABILITIES
- Skill and ability in electronic medical records applications.
- Ability to work as a member of a team.
- Ability to communicate effectively both in writing and verbally with team members and patients.
- Skill and ability to handle multiple priorities and deadlines.
- Ability to understand legal issues that influence the practice of the extenders.
- Ability to lead a team maintaining professional demeanor
- Ability to build effective relationships within and outside PHC.
- Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists.
- Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form.
- Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry.
- Ability to verbally communicate effectively with team members and patients.
Disclaimer The above information is intended to describe the general nature and level of work being performed by people assigned to this job. It is not intended to be an exhaustive list of responsibilities, duties and skills required of personnel so classified.
Qualifications:
MINIMUM EDUCATION REQUIRED: Graduate from an accredited school of nursing with current Georgia license for Advanced Practice Nursing and a Masters degree in Nursing, OR graduate of an accredited Physician Assistants program with current license for the Georgia State Composite Board. MINIMUM EXPERIENCE REQUIRED: None. MINIMUM LICENSURE/CERTIFICATION REQUIRED BY LAW: Licensed Physician Assistant in the State of Georgia. OR Licensed for Advanced Practice Nursing (ACNP, FNP, and WHNP). ADDITIONAL QUALIFICATIONS: None.
Position Information
LOCATION
Augusta, Georgia
POSTED
04/01/2025
TYPE
Nurse Practitioner/Physician Assistant
SCHEDULE
Full-time
SHIFT
Day Job
JOB ID
1897783
Required Skills & Experience
Education and/or Experience:
· Required
o Associate’s degree or vocational school graduate with courses in Mechanical Drafting, Algebra, and Trigonometry, along with six years minimum of aerospace design and drafting experience. Minimum of 8,000 hours working directly with CATIA V5.
o Bachelor’s degree in Aerospace Engineering, Mechanical Engineering, or equivalent, along with four years minimum of aerospace design and drafting experience. Minimum of 6,000 hours in CATIA V5.
Required Skills:
· Language: Must have excellent communication and inter-personal skills; must have the ability to read, comprehend, present, and write (in English) correspondence, blueprints, technical journals and drawings, policies, procedures
Required Skills:
· Language: Must have excellent communication and inter-personal skills; must have the ability to read, comprehend, present, and write (in English) correspondence, blueprints, technical journals and drawings, policies, procedures, etc.
· Reasoning Ability: Ability to apply common sense understanding to carry out detailed, written, and oral instructions. Ability to solve problems involving many variables in various situations.
· Mathematical Skills: Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals.
· Other Abilities: Must be able to effectively multi-task and quickly change from task to task. Must be a detail-orientated self-administrator able to work quickly and effectively in a fast-paced environment. Must understand engineering drawings. Must have a working knowledge of shop operations and processes to aid in clarifying drawings. Must be able to analyze figures, results, or complex data to determine the logical solution to a drafting problem. To be responsible for high clerical accuracy and moderate factual dependability in assembling and presenting data. Must be proficient operating CAD programs (CATIA V5), MS Office, including Word, Excel, and PowerPoint as well as email, and the use of printers and plotters.
Tools used:
· Computer
Nice to Have Skills & Experience
Desired:
o Master’s degree in Aerospace Engineering, Mechanical Engineering, or equivalent, along with two years minimum of aerospace design and drafting experience. Minimum 4,000 hours in CATIA V5.
o CATIA V5 courses strongly desired.
o ASME Y14.5 certification is a plus.
Job Description
Summary: To prepare 3D models and drawings using CATIA V5 R21 and above. Performs design, drafting, and checking functions and can coordinate designs with both Project and Manufacturing Engineers.
Essential Duties and Responsibilities:
Under general supervision, must be able to perform a variety of job duties including, but not limited to:
· Proficient in all facets of 3D modeling in CATIA V5. Capable of creating sketch-based solids, complex surfaces, assemblies, parameterized models, etc.
· Use manufacturing knowledge in the creation of metallic components by sheet metal forming, and both subtractive and additive manufacturing to design parts which can be readily manufactured.
· Create details and assemblies with broad range of complexity while operating within engine and vehicle level DMU environments. Model in local and/or global coordinate systems, as applicable.
· Ability to operate in PLM software (3DX) and use standard configuration management practices.
· Create 2D drawings or 3D PDFs for detail components and assemblies.
· Create Model Based Definition (MBD) using the FTA workbench.
· Develop assembly BOMs.
· Strong understanding and application of GD&T practices per ASME Y14.5-2 acceptable).
· Perform tolerance stack-ups, interference checks, and installation assessments.
· Write Engineering Orders and make changes to existing drawings.
· Perform weight calculations (hand or CATIA based).
· Perform design checks of models and drawings created by other drafters.
· Aid the shop, customers, and vendors in reading and interpreting SSP and customer drawings to facilitate manufacturing.
· Create tooling models and drawings.
· Follow all Senior policies and procedures.
· Other duties as assigned.
· Maintain an organized, clean, and safe work area using safety standards
Other Information:
· Less than 5% travel is typical for this role.
