Quadrants Trigonometry Angles Jobs in Usa

Under general and/or immediate supervision from higher level engineering staff, performs a variety of journey level technical drafting, office and field engineering work; and provides assistance and information to the public. May exercise functional and technical supervision over less experienced technical staff.
Position Snapshot/A Day in the Life: The Engineering Technician II performs routine drafting and technical engineering work in support of municipal infrastructure projects. Responsibilities include assisting with engineering design and planning, providing customer service, and performing technical office and field duties related to updating, maintaining, and analyzing the Public Works and Engineering Department's Geographic Information System (GIS) and utility infrastructure data. This position coordinates and conducts research, field data collection, and condition assessments of infrastructure assets, using GIS, database, and information management tools to support capital planning and ensure compliance with regulatory requirements.

Essential Functions

Engineering Technician II -This is the full journey level in the Engineering Technician series. Employees within this class are distinguished from the Engineering Technician I By the performance of the full range of duties as assigned including the moderately complex duties of drafting, office and field engineering work. Employees at this level receive only occasional instruction or assistance as new or unusual situations arise, and are fully aware of the operating procedures and policies of the work unit. This class is flexibly staffed and is normally filled by advancement from the I level, or when filled from the outside, requires previous work experience.

ESSENTIAL FUNCTIONS:Incumbent must have the ability to:

• Review and process tract maps, parcel maps, of line adjustments, grants of easement, and street right-of-ways for recordation.
• Verify fulfillment of conditions of approval for new subdivisions; perform on-site inspections to verify survey monuments related to parcel maps and lot line adjustments.
• Prepare and draft technical engineering plans for construction of streets, alleys, storm drains, water lines, and other public improvements.
• Provide public assistance at counter and over the telephone.
• Prepare quantity and cost estimates for engineering projects.
• Maintain a variety of maps and records including tract maps, parcel maps, lot line adjustments, easements, street and address changes.
• Review engineering plans to determine appropriate layout of construction projects.
• Perform on-site inspections to obtain information; determine angles and set grade stakes, hubs, turning points and benchmarks using appropriate surveying techniques; locate and measure boundary lines, right-of-ways, and land grades.
• Make and check mathematical calculations related to surveying, drafting and basic engineering.
• Maintain accurate survey records in the form of field notes and sketches.
• Participate in a variety of engineering design and planning work related to municipal engineering projects.
• Answer questions and provide information to the public concerning engineering activities.
• Assist in development and maintenance of the record keeping and filing systems.
• Prepare, assemble and distribute copies of maps, charts and blueprints.
• Answer questions and provide information to the public concerning engineering activities.
• Perform any other tasks or functions deemed necessary to the daily operations of the employer.

EXPERIENCE AND TRAINING GUIDELINES: A combination of experience and training that would likely provide the required knowledge and abilities is qualifying. The employee must have knowledge of:

Engineering Technician II: In addition the qualifications of Engineering Technician I, knowledge of:

• Terminology, methods, practices and techniques of drafting.
• Trigonometry as applied to the computation of angles, areas, distances and traverses.
• Elementary surveying techniques and practices.
• Engineering maps and records.

• Perform moderately complex engineering and mathematic calculations with speed and accuracy.
• Understand and follow written instructions and sketches.
• Use and care for drafting, surveying, and mechanical instruments and tools.
• Work independently in the absence of supervision.

The City of Fontana has a flexible benefits plan. This plan allows for employees to select benefits based upon their individual needs. Full-time and Classified Part-time employees are eligible for benefits.

Please to view our excellent employee benefit options.

• 
  
  
• High School graduate or equivalent
  
  
• Some college
  
  
• Trade school graduate or Apprenticeship
  
  
• Associate's degree in related field
  
  
• Bachelor's degree in related field
  
  
• Bachelor's degree or higher in non-related field
  
  
• Equivalent to Bachelor's degree in related field
  
  
• Master's degree or higher in related field
  
  
• None of the above
  
  

• 
  
  
• No experience
  
  
• Less than one (1) year.
  
  
• One (1) year or more year(s) but less than two (2) years.
  
  
• Two (2) or more years but less than four (4) years.
  
  
• Four (4) or more years but less than six (6) years.
  
  
• Six (6) years or more but, less than eight (8) years.
  
  

Required Question

At BlueOval Battery Park Michigan, you will...
• use your entrepreneurial skills and team mindset to come up with data-driven solutions
• build and lead an agile team to deliver the advanced technology that drives the future
• create a culture of trust, encourage diversity of thought and foster leadership in others
• be part of the historic transformation of the automotive industry.

*****During training and initial launch, the operating pattern will be an 8-10 hour shift and then transition to a 12-hour shift schedule.*****

What you'll do...
Key responsibilities may include:
• Fire Suppression:
o Respond immediately and effectively to all types of fires using appropriate extinguishing agents and equipment.
o Operate and maintain fire apparatus, pumps, hoses, nozzles, and other specialized firefighting equipment.
o Conduct search and rescue operations for personnel within hazardous environments.
o Perform ventilation, overhaul, and salvage operations as required.
• Hazardous Materials (HazMat) Response:
o Identify, assess, contain, control, and mitigate spills or releases of hazardous materials.
o Utilize appropriate personal protective equipment (PPE), including Self-Contained Breathing Apparatus (SCBA) and various levels of chemical protective suits.
o Understand chemical properties, potential reactions, and safe handling procedures for materials present in the facility.
o Perform decontamination procedures for personnel and equipment.
• Medical Aid:
o Provide immediate pre-hospital medical care, including first aid, CPR, and AED operation, to injured or ill personnel.
o Stabilize patients and assist on site medical staff and external Emergency Medical Services (EMS) personnel upon their arrival.
• Technical Rescue:
o Participate in specialized rescue operations such as confined space rescue, high-angle rescue, and machine rescue, as trained and equipped by the facility.
o Utilize specialized rescue tools and techniques safely and effectively.
• Emergency Standby & Hot Work Coverage:
o Provide dedicated fire and safety coverage for high-risk operations within the facility, such as hot work (welding, cutting), confined space entry, or hazardous material transfers.
o Ensure all safety protocols and permit conditions are strictly adhered to during standby operations.
• Incident Command System (ICS) Support:
o Operate effectively within the established Incident Command System (ICS) structure during emergencies.
o Follow direct orders, maintain accountability, and provide clear, concise status reports to the Incident Commander or assigned supervisor.
• Maintenance:
o Regularly inspecting, cleaning, lubricating, and performing scheduled maintenance on fire prevention equipment like fire suppression system components, fire alarm system components and fire extinguishers.
o Perform routine inspections, functional tests, cleaning, and minor maintenance on all fire apparatus, tools, and equipment (e.g., hoses, nozzles, SCBA, pumps, rescue tools, HazMat detection devices, etc.) to ensure compliance and peak operational readiness.
o Ensure all internal apparatus fire pump components are operating properly, lubricate control valves, and identify any issues that require correction.
o Document all maintenance activities and report any unresolved deficiencies or malfunctions promptly.

o Collaborate with production operators, engineers, and maintenance technicians to identify and address fire prevention equipment issues, isolate compromised fire prevention system(s), and manage fire suppression system impairments.

• Facility Inspections:
o Conduct routine and systematic fire safety inspections of buildings, processing units, storage areas, and equipment to identify potential fire hazards, unsafe conditions, or non-compliance issues.
o Inspect fire suppression systems (sprinklers, standpipes, fire alarms), fire extinguishers, emergency lighting, and exit routes for proper function and readiness.
• Pre-Incident Planning:
o Participate in the development and review of pre-incident plans for various scenarios throughout the facility.
o Thoroughly understand building layouts, process flow diagrams, hazardous material locations, utility shut-offs, and emergency egress routes.
• Permit System Compliance:
o Review and verify compliance for hot work permits, confined space entry permits, and other safety-related permits, ensuring all conditions are met before and during operations.
• Risk Assessment:
o Actively participate in identifying and assessing risks related to fire, explosion, and other emergencies within the industrial environment.
• Safety Adherence:
o Strictly adhere to all company policies, Standard Operating Procedures (SOPs), safety regulations, and industry best practices.
o Proactively identify, report, and help mitigate unsafe conditions or practices observed within the facility.
o Consistently and correctly wear and maintain all required Personal Protective Equipment (PPE).
• Inventory Management:
o Maintain accurate inventory of all firefighting supplies, HazMat absorbents, medical supplies, and rescue equipment.
o Ensure proper storage and accessibility of all emergency response assets.
• Continuous Learning:
o Actively participate in all required internal and external training programs, drills, and exercises, including but not limited to: fire suppression techniques, HazMat operations/technician level, medical refreshers, technical rescue disciplines, and SCBA proficiency.
o Maintain physical fitness standards necessary for the demanding nature of the job.
• Internal Training Support:
o Assist in developing and delivering fire safety and emergency preparedness training to facility personnel (e.g., fire extinguisher use, emergency evacuation procedures, basic first aid).
• Incident Reporting:
o Accurately and thoroughly document all incidents, near-misses, inspections, training activities, and equipment maintenance in logs, reports, and digital systems.
o Provide clear and concise written and verbal reports.
• Effective Constructive Communication:

o Use constructive communication skills with team members, peers, leadership, facility personnel and external emergency services during routine operations and emergencies to demonstrate the following behaviors:

• Focus on the issue not the person
• Use Active Listening
• Have a Respectful Cooperative Attitude
• Use Clear Positive Language
• Have awareness of your Non-Verbal Communication
• Be Goal-Oriented in your approach to resolve issues

• Shift Handovers:
o Conduct thorough and detailed handovers at the end of shifts, ensuring critical information and pending tasks are clearly communicated to incoming personnel.

Candidates must possess full flexibility and a readiness to consistently work across all established standard, operating, and rotational shift schedules, encompassing day, night, weekend, and holiday shifts.

You'll have...

Required Skills and Qualifications:
Minimum requirements:
• Must be at least 18 years of age
• High School Diploma
• NFPA 1001 Firefighter I & II (or equivalent state/provisional certification)
• CPR/AED and First Aid Certification
• Minimum of 2 years of emergency services experience as a certified firefighter
• Previous Emergency Services experience or combination of previous work experience and training equivalent
• Strong problem-solving and critical thinking skills under pressure.
• Excellent decision-making abilities in high-stress situations.
• Exceptional teamwork and interpersonal communication skills.
• Ability to pass a NFPA firefighter physical.
• Acute attention to detail and strong observational skills.
• Ability to strictly follow instructions, SOPs, and safety protocols.
• Exceptional computer skills, reading and data interpretation
• Comfortable learning new technology
• Legally authorized to work in the US

• NFPA 472/1072 Hazardous Materials Operations Certification
• EMT-B or higher
• Relevant Technical Rescue certifications (e.g., Confined Space Rescue, High-Angle Rescue, Vehicle Extrication)

You may not check every box, or your experience may look a little different from what we've outlined, but if you think you can bring value to Ford Motor Company, we encourage you to apply!

Rate of Pay and Benefits: $28.20 per hour

As an established global company, we offer the benefit of choice. You can choose what your Ford future will look like: will your story span the globe, or keep you close to home? Will your career be a deep dive into what you love, or a series of new teams and new skills? Will you be a leader, a changemaker, a technical expert, a culture builder...or all of the above? No matter what you choose, we offer a work life that works for you, including:

• Immediate medical, dental, vision and prescription drug coverage
• Flexible family care days, paid parental leave, new parent ramp-up programs, subsidized back-up child care and more
• Family building benefits including adoption and surrogacy expense reimbursement, fertility treatments, and more
• Vehicle discount program for employees and family members and management leases
• Established and active employee resource groups
• Paid time off for individual and team community service
• A generous schedule of paid holidays, including the week between Christmas and New Year's Day
• Paid time off and the option to purchase additional vacation time.
For more information on salary and benefits, click here: sponsorship is not available for this position.
Candidates for positions with Ford Motor Company must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire.

We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, religion, color, age, sex, national origin, sexual orientation, gender identity, disability status or protected veteran status. In the United States, if you need a reasonable accommodation for the online application process due to a disability, please call 1-888-336-0660.

#LI-Onsite

About the Company

Avdoo is a New York City–based real estate development firm focused on acquiring, entitling, and developing residential and mixed-use projects across Manhattan and Brooklyn.

About the Role

We are seeking a highly driven, aggressive, and entrepreneurial Acquisitions Associate to focus exclusively on off-market deal origination. This is not a broker-facing role. This position is about building direct relationships with building owners and sourcing opportunities before they ever reach the market. We are looking for someone who has successfully closed real estate transactions in Manhattan and Brooklyn — not just sourced deals, but helped drive them across the finish line. If you are hungry, competitive, and relentless about finding and closing deals — this is the opportunity.

Responsibilities

• Source off-market acquisition opportunities directly from property owners throughout Manhattan and Brooklyn
• Develop and maintain direct relationships with building owners (not brokers)
• Identify and pursue development sites, conversion opportunities, multifamily assets, distressed situations, and office repositioning opportunities
• Confidently discuss and structure potential joint ventures, recapitalizations, and ground leases directly with building owners
• Drive opportunities from initial outreach through LOI, negotiation, and closing
• Conduct neighborhood-level research to uncover ownership patterns and acquisition angles
• Perform high-level zoning analysis (FAR, bulk, use, air rights, conversion potential)
• Collaborate with the underwriting team to evaluate feasibility and structure transactions
• Present new opportunities weekly to the executive team in acquisition meetings, clearly articulating the opportunity, zoning potential, ownership dynamics, and strategic angle
• Track outreach efforts, pipeline, and owner communications
• Be active in the field — walking neighborhoods, meeting owners, uncovering opportunities before competitors

Qualifications

• 2–5+ years of experience in NYC real estate acquisitions, investment sales, or development
• Demonstrated track record of closing transactions in Manhattan and Brooklyn
• Deep familiarity with prime Manhattan and Brooklyn neighborhoods, including submarkets and development dynamics
• Strong working knowledge of NYC zoning and development potential
• Comfortable analyzing development upside and structuring transactions
• Confident and professional communicating directly with building owners and principals
• Ability to clearly and confidently present opportunities to senior executives
• Persistent, resilient, and comfortable handling rejection
• Strong negotiation and relationship-building skills
• Organized and disciplined in managing outreach and pipeline

Pay range and compensation package

• Base Salary: $75,000 – $100,000 (commensurate with experience)
• Upside: Meaningful commission structure tied directly to deals sourced and closed
• Significant earning potential for high performers

Equal Opportunity Statement

Avdoo is committed to diversity and inclusivity in the workplace.

Additional Details

• In-office role based in New York City (not remote)
• Highly entrepreneurial, performance-driven environment
• Direct exposure to senior leadership
• Clear path for growth and advancement

We are more than a health system.

We are a belief system.

We believe wellness and sickness are both part of a lifelong partnership, and that everyone could use an expert guide.

We work hard, care deeply and reach further to help people uncover their own power to be healthy.

We inspire hope.

We learn, grow, and achieve more – in our careers and in our communities.

Job Description Summary: This position ensures the delivery of evidence-based practice by professional nursing personnel and other staff in the designated area of responsibility.

They are responsible for planning, organizing, directing, and evaluating the delivery of evidence-based patient care in a cost effective manner.

The Manager operationalizes the Nursing Philosophy along with the mission, vision, values, goals and objectives of OhioHealth.

They are accountable and responsible for administrative and fiscal management of the department and in meeting the goals in all four quadrants of the balanced scorecard at the unit/department level.

In addition, they will contribute significantly to the overall goals and objectives of the organization.

Responsibilities And Duties: 30% Patient Care Assumes accountability for ongoing delivery of patient care during all operating hours; maintains a broad awareness of daily operations to guide patient care delivery; assures application of the nursing process by Registered Nurses in the clinical setting assessment, planning, implementation and evaluation ; assures documentation of patient care in the medical record.

Uses data from various sources to initiate continuous quality improvement at the unit level.

Coordinates nursing care in collaboration with other healthcare disciplines and assists in integrating services across the continuum of health care.

Accountable for nursing practice in a safe environment.

Participates in process improvement activities and root cause analysis investigations.

30% Operations and Personnel Management 1.

Develops and is responsible for annual operational and capital budget.

Manages resources to remain within established budget and controls materials, supplies, and equipment necessary for unit operations.

Ensures that budget and program objectives are met.

2.

Develops budgeted fiscal year staffing plans.

Develops, maintains, and evaluates effectiveness of position control i.e.

development of labor budget, determination of FTEs, scheduling FTEs and final approval to ensure compliance with staff plan .

3.

Ensures provision of qualified human resources to identified patient care needs; develops, coordinates and approves staffing time schedules, considering scope of practice, competencies, patient needs, and staff competency.

4.

Responsible for recruitment, selection, retention and evaluation of personnel.

Ensures appropriate orientation, training, competence, continuing education, and professional growth and development of personnel.

5.

Effectively evaluates performance of personnel.

Advocates work environment that minimizes work-related illness or injury.

6.

Assesses impact of, and plans strategies to address, diversity, ethics and the changing needs of society.

Strives to provide a workforce reflecting population diversity.

Ensures delivery of culturally competent care and healthy, safe working environment.

7.

Uses information systems to retrieve, implement, and retain essential records and services.

15% Leadership 1.

Facilitates development of leadership activities and promotes staff and self-attendance at meetings and educational programs.

Actively participates in organizational committees and decision making.

2.

Provides input into executive level decisions; keeps staff informed of executive level activities.

3.

Facilitates atmosphere of participative management and development of collegial relationships among nursing staff; ensures registered nurse participation in decision making at the unit level.

Participates on Shared Governance Councils.

Serves as a link between nursing staff and other health care disciplines, both within and outside of organized nursing services.

Actively participates in interdepartmental relationship building.

4.

Participates in nursing policy formation and decision making.

Identifies methods to achieve and monitor compliance with requirements of regulatory organizations.

5.

Participates in renovation and project management.

6.

Actively participates in service line growth and practice innovation.

7.

Actively participates in strategic planning activities.

15% Professional Development 1.

Contributes to development of self and staff through educational programs to meet identified learning needs and through written performance recognition and/or disciplinary procedures.

2.

Facilitates and encourages staff to obtain relevant specialty certification.

Earns and maintains appropriate specialty certification.

3.

Participates in education of nursing and other students in health care environment.

4.

Participates and encourages staff to participate in organizational policy formation and decision making.

5.

Actively participates in divisional, departmental and hospital/organization activities.

Develops and maintains professional competencies by attending educational programs and participation in professional organizations.

Seeks opportunities for publication, presentation, and professional leadership in professional and community societies.

6.

Serves as a member or officer of community groups or agencies; participates and assumes leadership roles in professional organizations and encourages staff participation.

10% Research and Evidence-Based Practice 1.

Ensures an evidence-based practice environment.

Facilitates dissemination of research findings and integration of evidence-based guidelines and practices in the health care setting.

2.

Identifies areas of clinical and administrative inquiry suitable for nurse researchers.3 .

Identifies key measures for department success, based on hospital/organization goal and objectives.

Monitors progress of goals and develops actions to attain goals.

4.

Communicates goals to staff and others in the organization.

As a High Reliability Organization (HRO), responsibilities require focus on safety, quality and efficiency in performing job duties.

The job profile provides an overview of responsibilities and duties and is not intended to be an exhaustive list and is subject to change at any time Minimum Qualifications: Bachelor's Degree: Nursing (Required)BLS
- Basic Life Support
- American Heart Association, RN
- Registered Nurse
- Ohio Board of Nursing Additional Job Description: Specialized Knowledge: Process improvement skills.

Project management skills.

May require advance training in specialty areas.

Skills in computer applications as appropriate to area(s) of responsibility.

Demonstrated skills in interpersonal relationships, verbal and written communication, management, adult education and nursing practice standards.

Minimum 3 years clinical nursing experience.

Previous leadership experience such as precepting, charge role, clinical lead role, mentoring, or department committee leadership.

Work Shift: Day Scheduled Weekly Hours : 40 Department Emergency Department Join us! if your passion is to work in a caring environment if you believe that learning is a life-long process if you strive for excellence and want to be among the best in the healthcare industry Equal Employment Opportunity OhioHealth is an equal opportunity employer and fully supports and maintains compliance with all state, federal, and local regulations.

OhioHealth does not discriminate against associates or applicants because of race, color, genetic information, religion, sex, sexual orientation, gender identity or expression, age, ancestry, national origin, veteran status, military status, pregnancy, disability, marital status, familial status, or other characteristics protected by law.

Equal employment is extended to all person in all aspects of the associate-employer relationship including recruitment, hiring, training, promotion, transfer, compensation, discipline, reduction in staff, termination, assignment of benefits, and any other term or condition of employment

We are more than a health system. We are a belief system. We believe wellness and sickness are both part of a lifelong partnership, and that everyone could use an expert guide. We work hard, care deeply and reach further to help people uncover their own power to be healthy. We inspire hope. We learn, grow, and achieve more - in our careers and in our communities.

Job Description Summary:

Responsibilities And Duties:

Minimum Qualifications:

Additional Job Description:

May require advance training in specialty areas. Specialized knowledge in nursing process and clinical skills. Demonstrated skills in interpersonal relationships, verbal and written communication and nursing practice standards. Skills in computer applications as appropriate to area(s) of responsibility.

2-3 years nursing experience in related or like areas of responsibility. Previous leadership experience such as precepting, charge role, clinical lead role, mentoring, department committee leadership or facilitation of meetings.

Work Shift:

Scheduled Weekly Hours :

Department

Join us!
if your passion is to work in a caring environment
if you believe that learning is a life-long process
if you strive for excellence and want to be among the best in the healthcare industry

Equal Employment Opportunity

OhioHealth is an equal opportunity employer and fully supports and maintains compliance with all state, federal, and local regulations. OhioHealth does not discriminate against associates or applicants because of race, color, genetic information, religion, sex, sexual orientation, gender identity or expression, age, ancestry, national origin, veteran status, military status, pregnancy, disability, marital status, familial status, or other characteristics protected by law. Equal employment is extended to all person in all aspects of the associate-employer relationship including recruitment, hiring, training, promotion, transfer, compensation, discipline, reduction in staff, termination, assignment of benefits, and any other term or condition of employment

• Designs and produces engineering drawings for natural gas and auxiliary facilities.
• Provides technical guidance to engineers and designers, ensuring drawing accuracy, consistency, and adherence to company drafting standards.
• Maintains design consistency across the engineering team by applying established standards, best practices, and quality controls.
• Collaborates with engineering and operations to optimize facility designs and ensure compliance with company specifications, safety requirements, and regulatory standards.
• Maintains and updates standard drawings, facility drawings, and company drafting libraries to support ongoing operations and project needs.
• Operates independently as a selfstarter, completing assignments with minimal supervision while managing priorities effectively.
• Develops complete, timely, and accurate drawing packages for new, expanded, or modified facilities, supporting project objectives and construction schedules.
• Reviews drawings to verify compliance with applicable codes, regulations, and company standards, identifying and resolving discrepancies as needed.
• Evaluates design concepts and performs required engineeringrelated calculations to ensure accuracy and feasibility.
• Manages drawing documentation by organizing and maintaining drawing files, indexes, revision histories, and digital records in accordance with company documentcontrol procedures.
• Completes site visits with engineering and operations teams to ensure drawing accuracy as needed.

• Microstation experience preferred.
• Experience with 3D drawings or modeling.
• Experience with natural gas pipeline and compressor station design.
• Strong math skills, including geometry, trigonometry, and higher mathematics.
• Demonstrated knowledge of mechanical, structural, and electrical engineering design drafting principles.
• Knowledge of national gas codes, Pipeline Safety Regulations, and related codes and standards.
• Excellent planning and organizational skills.
• Ability to work independently.
• Ability to size and design structural steel and reinforced concrete components.
• Ability to develop applications for the CADD system.
• Strong communication skills, and ability to develop rapport with internal and external customers.
• Strong computer skills, including the CADD system.

Compensation details: 5

PI1bbb8d7dfb96-3631

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for a Tool & Die Maker to join our Materials Management & Tooling team in Auburn and Renton, Washington.

In this hands-on position, you will be responsible for a variety of tasks, from interpreting blueprints and work orders to developing effective plans for tool fabrication and repair. Your skills will be essential in troubleshooting production challenges, operating advanced machinery, and ensuring that all tools meet stringent quality standards. Collaborating with cross-functional teams, you will also engage with customers and suppliers to address any functional issues, all while adhering to safety protocols and continuous improvement practices. If you are passionate about precision engineering and ready to make a significant impact in a fast-paced environment, we invite you to explore this exciting opportunity.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.

Position Responsibilities:

• Perform all functions related to tool fabrication, rework, and repair as required.

• Obtain work orders from the team leader or supervisor, determining assignments based on schedule dates and tool availability.

• Read work orders and blueprints to identify required tasks, tools, and equipment.

• Develop plans for the fabrication, maintenance, and repair of tools.

• Initiate and coordinate engineering change requests with internal support groups when necessary.

• Determine the sequence of tool fabrication work, troubleshoot issues, and develop solutions to production challenges.

• Access and utilize appropriate tool drawings, models, and specifications using available computing systems.

• Select and verify necessary equipment from the shop storage area, ensuring current tool certification.

• Perform repairs or replacements on tools as per Standing Tool Order (STO) Production Requests, and request rework orders if necessary.

• Layout holes, lines, and other tool features, and install or modify hydraulic, pneumatic, and vacuum tubes as required.

• Operate various machinery, including power saws, drill presses, and CNC machines, to shape materials and prepare details.

• Move materials and equipment using Powered Industrial Trucks (PIT) and overhead cranes as needed.

• Maintain accurate records of orders and coordinate tooling information with other shifts and departments.

• Handle hazardous materials in compliance with Boeing procedures, using appropriate personal protective equipment.

• Engage in continuous improvement practices to enhance quality, safety, and efficiency in tool and die work.

• Use precision measuring instruments, such as micrometers and gauges, to ensure accuracy in fabrication and repairs.

• Interface with customers and suppliers to incorporate changes or resolve functional and installation issues.

• Submit completed jobs to Quality Assurance and assist inspectors in performing necessary checks or measurements.

• Utilize mathematics, including algebra and trigonometry, to calculate dimensions and analyze Model Based Definition (MBD) for fabrication details.

• Conduct tool tryouts and make necessary adjustments to ensure production meets quality requirements and specifications.

Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.

• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.

• Work in environments that may involve contact with metals, solvents, and coolants.

• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.

• Adapt to varying noise levels and atmospheric conditions.

• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee

Resumes of current Puget Sound Boeing employees submitted via “Find Jobs” in Boeing/Workday will be considered as this job is not installed in QTTP (Quality Through Training Program).

Basic Qualifications:

• 5+ years of experience in repairing, maintaining, construction, and/or the inspection of tools, dies, jigs, powerfeed, etc.

• 5+ years of experience in machine shop processes, geometric dimensioning & tolerances, and machining capabilities of different types of materials.

• 2+ years of experience using complete set of toolmaker shop equipment (milling, lathe, precision, grinding, polishing, and fitting).

Preferred Qualifications:

• 5+ years of experience as a Tool & Die Maker.

• 2+ years of experience with hydraulics and pneumatics.

• Completed an approved Mold Maker or Tool and Die Maker state apprentice ship program and/or certified by the U.S.

• Ability to perform machining operations with a specified degree of accuracy and within a timely manner, maintain close and exacting tolerances and finish requirements ensuring highest quality workmanship on all tools, gages, and fixtures with minimal scrap.

• Capable of creating a repeatable setup and working to tolerances of +/-.0002" in controlled environment.

• Possesses 4 and 5 axis CNC skills for mill or lathe, and extensive knowledge of detail cutting tool geometry for different cutting tool types and materials.

• Ability to reverse engineer and manufacture mold components within time limitations

• Ability to read and write G and M code with CAM programming experience.

Conflict of Interest:

Successful candidates for this position must successfully complete the Company’s Conflict of Interest (COI) assessment process.

Typical Education & Experience:

High school graduate or GED preferred.

Relocation:

• This position offers relocation based on candidate eligibility.

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement:

• This position is for a variety of shifts

Total Rewards & Pay Transparency:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.  Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.  

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.  

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay: $40.00/hour, with potential to earn up to $62.45/hour in accordance with the terms of the relevant collective bargaining agreement.

Applications for this position will be accepted until Jul. 31, 2026

Language Requirements

English Preferred

Relocation

This position offers relocation based on candidate eligibility.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Working Schedule for this role will be at CVG 100 and will be a shift 1 position

JOB SUMMARYAs a EHS Tech, one will perform necessary assessments, inventories and inspections for various environmental and safety regulations, to include job hazard assessments, accident Investigations, various environmental inspections, hazard control and prevention reports, fire extinguishers, fire suppression systems, emergency lighting, and tracking and verification of corrective actions.ESSENTIAL DUTIES AND RESPONSIBILITIES

• Utilize various software programs for performing updates to existing documents and creating new documentation.
• Maintain data pertaining to MSDS, Accident Reports and corrective action.
• Assist or provide specialized training classes pertaining to environmental and/or safety-related subjects to various personnel within the company.
• Prepare various reports for agencies and internal documentation.
• Maintain files and documentation records as required by various agencies.
• Control and oversee Personal Protective Equipment program.
• Assist in developing new programs and procedures as needed.
• Work with in established guideline for the continual improvement of the Environmental Health and Safety Department.
• Oversee Ergonomics Program and conduct workstation audits.
• Oversee the Fire Suppression and extinguisher inspection program.
• Assist in reviewing and participate in the Emergency Response Program.
• Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor.
• Comply and follow all procedures within the company security policy
• May perform other duties and responsibilities as assigned.

JOB QUALIFICATIONSKNOWLEDGE REQUIREMENTS

• Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry.
• Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations.
• Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public.
• Ability to define problems, collect data, establish facts, and draw valid conclusions.
• Ability to operate a personal computer including using a Windows based operating system and related software.
• Advanced PC skills, including training and knowledge of Jabil's software packages.
• Ability to write simple correspondence. Read and understand visual aid.
• Ability to apply common sense understanding to carry out simple one- or two-step instructions.
• Ability to deal with standardized situations with only occasional or no variables.
• Ability to read and comprehend simple instructions, short correspondence, and memos.
• Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals.
• Ability to compute rate, ratio, and percent and to draw and interpret graphs.

JOB SUMMARYResponsible for the verification testing, diagnosing and repairing of electronic circuit board assemblies.

First Shift: Monday
- Friday 6:00 a.m.

- 2:30 p.m.ESSENTIAL DUTIES AND RESPONSIBILITIES· Diagnose and repair to basic powered functional test failures (power, traffic, network issues) to a component level on electronic circuit board assemblies while maintaining minimal quantities of Engineering and Component hold assemblies.· Exhibit proficiency in the use of electronic test and measurement equipment.· Understand and utilize assembly documentation such as but not limited to the following; Schematics, BOM's, EC documents, Visuals, Debug, Testing tools and procedures.· Assist Test Engineering department in an ongoing data evaluation program for improving the efficiency of the diagnosis of assemblies.· Understand, recognize and execute Jabil production requirements, rules, policies and procedures.· Work as a team member to achieve Diagnostic department's process yield goals.· Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor.· Comply and follow all procedures within the company security policy.· May perform other duties and responsibilities as assigned.JOB QUALIFICATIONSKNOWLEDGE REQUIREMENTS· Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry.· Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public.· Ability to define problems, collect data, establish facts, and draw valid conclusions.· Ability to operate a personal computer including using a Windows based operating system and related software.· Advanced PC skills, including training and knowledge of Jabil's software packages.· Ability to write simple correspondence.

Read and understand visual aid.· Ability to apply common sense understanding to carry out simple one- or two-step instructions.· Ability to deal with standardized situations with only occasional or no variables.· Ability to read and comprehend simple instructions, short correspondence, and memos.· Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals.· Ability to compute rate, ratio, and percent and to draw and interpret graphs.

SUMMARY
Under limited supervision designs, develops and maintains test procedures, tester hardware and software for electronic circuit board production.

ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned.

LEADERSHIP AND MANAGEMENT RESPONSIBILITIES

Recruitment and Retention:
·         Recruit and interview Process Technicians.
·         Communicate criteria to recruiters for Process Technician position candidates.
·         Coach technicians in the interviewing/hiring process.
·         Monitor team member turnover; identify key factors that can be improved; make improvements.

Employee and Team Development:
·         Identify individual and team strengths and development needs on an ongoing basis.
·         Create and/or validate training curriculum in area of responsibility.
·         Coach and mentor Process Technicians to deliver excellence to every internal and external customer.

Performance Management:
·         Establish clear measurable goals and objectives by which to determine individual and team results (i.e. operational metrics, results against project timelines, training documentation, attendance records, knowledge of operational roles and responsibilities, personal development goals).
·         Solicit ongoing feedback from Assistant Test Engineering Manager, Workcell Manager (WCM), Business Unit Manager (BUM), peers and team member on team member’s contribution to the Workcell team. Provide ongoing coaching and counseling to team member based on feedback.
·         Express pride in staff and encourage them to feel good about their accomplishments.
·         Perform team member evaluations professionally and on time.
·         Drive individuals and the team to continuously improve in key operational metrics and the achievement of the organizational goals.
·         Coordinate activities of large teams and keep them focused in times of crises.
·         Ensure recognition and rewards are managed fairly and consistently in area of responsibility.

Communication:
·         Provide communication forum for the exchange of ideas and information with the department.
·         Organize verbal and written ideas clearly and use an appropriate business style.
·         Ask questions; encourage input from team members.
·         Assess communication style of individual team members and adapt own communication style accordingly.

TECHNICAL MANAGEMENT RESPONSIBILITIES

·          Review circuit board designs for testability requirements.
·          Support manufacturing with failure analysis, tester debugging, reduction of intermittent failures and downtime of test equipment.
·          Prepare recommendations for testing and documentation of procedures to be used from the product design phase through to initial production.
·          Generate reports and analysis of test data, prepares documentation and recommendations.
·          Review test equipment designs, data and RMA issues with customers regularly.
·          Design, and direct engineering and technical personnel in fabrication of testing and test control apparatus and equipment.
·          Direct and coordinate engineering activities concerned with development, procurement, installation, and calibration of instruments, equipment, and control devices required to test, record, and reduce test data.
·          Determine conditions under which tests are to be conducted and sequences and phases of test operations.
·          Direct and exercise control over operational, functional, and performance phases of tests.
·          Perform moderately complex assignments of the engineering test function for standard and/or custom devices.
·          Analyze and interpret test data and prepares technical reports for use by test engineering and management personnel.
·          Develop or use computer software and hardware to conduct tests on machinery and equipment.
·          Perform semi-routine technique development and maintenance, subject to established Jabil standards, including ISO and QS development standards.
·          Provide training in new procedures to production testing staff.
·          Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor.
·          Comply and follow all procedures within the company security policy.

MINIMUM REQUIREMENTS
Bachelors of Science in Electronics or Electrical Engineering from four-year college or university; and three to five years experience

LANGUAGE SKILLS
Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public.

MATHEMATICAL SKILLS
Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations.

REASONING ABILITY
Ability to define problems, collect data, establish facts, and draw valid conclusions. Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables.

PHYSICAL DEMANDS
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. The employee is frequently required to walk, and to lift and carry PC’s and test equipment weighing up to 50 lbs. Specific vision abilities required by this job include close vision and use of computer monitor screens a great deal of time.

WORK ENVIRONMENT
The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Individual’s primary workstation is located in the office area, with some time spent each day on the manufacturing floor. The noise level in this environment ranges from low to moderate.