Quadient Postage Meter Error Codes Jobs in Usa

Job Description

DEFINITION:

Under general direction of the Lineman Foreperson, perform construction and maintenance on all overhead, underground and sub‐surface electric transmission/distribution system components and equipment.

ESSENTIAL FUNCTIONS OF THE POSITION:

Construct and maintain overhead and underground distribution circuits, transmission circuits and substations.

Climbs/sets poles, towers and work at various heights above the ground installing and replacing electrical lines and associated hardware and equipment.

May perform “hot” energized work using rubber gloves or hot‐sticks.

Install and connect equipment to electrical lines such as transformers, switches, cutouts, capacitors, lightning arresters, streetlights, etc.

Install poles, anchors, crossarms, insulators, and strings wire.

Install, repair and maintain overhead and underground electric plant; including poles, anchors, crossarms, insulators, vaults, transformers, capacitors, reclosers, switches, wire, etc.

Regularly operate presses, gas monitoring and ventilating equipment.

Terminate cable systems on poles, transformers, switching equipment and in vaults.

Install substation equipment such as transformers, circuit breakers, disconnects, buswork, etc.

Install services from poles, service boxes or transformers in customer facilities.

Perform a variety of skilled tasks associated with the construction, maintenance, and repair of electrical distribution/transmission lines including digging holes, setting poles, installing pole cross arms and fixtures, stringing wire, installing transformers and meter equipment and installing and terminating underground cables and associated hardware

Respond to service calls concerning power outages and electrical programs; investigate complaints, arrange for planned outages and identify locations of underground facilities.

Perform a variety of skilled tasks associated with the construction, maintenance, and repair of streetlights.

Connect and disconnect services.

Troubleshoot and test individual customer services.

Reconstruct existing overhead and underground distribution lines.

Perform testing, phasing and energizes of new and reconstructed circuits.

Perform maintenance functions such as inspections, pole testing, cleaning of vaults and enclosures and necessary repairs and corrections.

Trim trees to maintain clearance around wires.

Diagnose, locate and clear trouble on primary and secondary overhead and underground lines and street lighting systems.

Maintain good housekeeping on the job, around the yard and on the vehicles.

Perform traffic control functions.

Participate in switching operations of the electric system and obtain loading data for system studies.

Perform many of the above functions on energized lines, utilizing appropriate hot line tools.

Maintain tools and equipment in clean and workable condition and assure that all tools are returned to the proper place after each use.

May supervise and train Apprentice Electrical Lineworkers.

May be trained to obtain certification and perform Underground Service Alert functions.

KNOWLEDGE OF:

Knowledge of electric utility operations, services and activities of a comprehensive electrical program, including electrical principles, methods, materials, tools, and equipment used in the installation and maintenance of transmission and distribution systems.

Safe handling of traffic in a construction zone.

Principles, methods, tools and equipment used in the installation and maintenance of poles, towers, substructures, conductors, cables, transformers, regulators, capacitors, services, meters, lighting fixtures, and all associated equipment.

Terminology and mathematics associated with department functions.

Basic electrical and mechanical theory.

California General Orders 95 and 128, applicable OSHA regulations, NEC and District rules.

Principles and procedures of record keeping and report preparation.

Occupational hazards and standard safety practices.

Fundamental safety regulations, first aid and methods of applying resuscitation.

ABILITY TO:

Work with various computer software, including Microsoft Suite and the District’s work order system(s).

Ability to observe safety rules

Perform heavy physical work; work at heights, work in adverse climatic conditions.

Use tools and equipment effectively.

Work as a crew member or alone.

Communicate clearly and concisely both orally and written.

Work cooperatively with public and fellow employees.

Work proficiently with hot line tools, i.e. sticks, under energized conditions on overhead and underground systems.

Work in confined spaces with energized high‐voltage equipment.

Read and interpret plans.

Follows oral and written instructions;

NECESSARY SPECIAL REQUIREMENTS:

Possession of a valid California Driver's License Class A or B.

A Department of Motor Vehicles "Driver Record Information" print‐out will be required at time of hire and throughout employment. Must be enrolled in District’s DMV pull‐notice program.

Recognized status as a Journey level Electrical Lineworker.

Possession of a valid California Class A driver’s license.

Rubber‐Glove certification.

Pole‐Top and Bucket rescue training.

EDUCATION AND EXPERIENCE:

Any combination equivalent to education and experience that would likely provide the required

knowledge and abilities would be qualifying. A typical combination is:

EDUCATION:

Any combination of education and experience equivalent to graduation of high school.

EXPERIENCE:

Possession of recognized journey level Electric Lineworker status, typically obtained as follows:Three and one‐half (3‐1/2) years training/experience in line work and successful completion of the journey level Electric Lineman examination administered by the I.B.E.W. or equivalent.

‐‐OR‐‐

Minimum of five (5) years’ experience in line work and successful petitioning for journey level Electric Lineman status with I.B.E.W.

‐‐OR‐‐

Certification from California‐Nevada Joint Apprenticeship Committee that applicant has passed the apprenticeship and examination for journey level Electric Lineman.

Possession of journey level Electric Lineman status granted by the I.B.E.W. or equivalent.

SUCCESSFUL COMPLETION OF THE FOLLOWING TRAINING:

Certification of Hazardous Waste Operations and Emergency Response (HAZWOPER) 29 CFR 191 hours).

Forklift certification.

Eight (8) hours Department of Transportation manifesting and labeling training.

Control of Hazardous Energy.

Eight (8) hours of annual HAZWOPER refresher training in compliance with mandated regulations.

Annual cardiac pulmonary resuscitation and first aid training and certification.

May be trained to obtain qualified worker certification for underground locators as defined by the State of California.

TYPICAL PHYSICAL DEMANDS:

The physical and mental demands of this position are described below. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of the position:

Travels regularly by vehicle in inspecting District facilities and conducting field operations.

Works in an outdoor environment.

Working at heights, confined spaces and with live electricity.

Stoops, kneels, crouches, crawls and climbs as required during performance of duties.

Communicates orally with District management, co‐workers and the public in face‐to‐face, one‐onone and group settings.

Regularly uses a telephone and radio for communication.

Uses office equipment such as computer terminals, copiers and FAX machines.

Walks on uneven terrain, outdoors in all weather conditions.

Hearing and vision within normal ranges.

Sitting: Remains in a seated position for up to eight (8) hours per day.

Standing: Remains in a standing position for up to eight (8) hours per day.

Hands/Arms: Operates vehicles and equipment for up to eight (8) hours per day

Lifting: Raises and lowers supplies and equipment up to twenty‐five (25) pounds.

Stooping: Bends body downward and forward by bending at the knees or waist

Talking: Expresses ideas and shares information by means of spoken work in person and by telephone.

Hearing: Hears well enough to receive communications in person and by telephone.

Vision: Operates vehicles and office equipment.

ENVIRONMENTAL FACTORS:

Exposure to the sun: 90% or less work time spent outside a building and exposed to the sun.

Irregular or extended work hours: Per the Memorandum of Understanding (MOU).

Work performed in an outside environment with exposure to dust, dirt and significant temperature changes between heat and cold.

ESSENTIAL MENTAL ABILITIES:

Exercise independent judgment.

Self‐directing and organized.

Reason objectively.

Assess, project and plan work activities on a daily and weekly basis.

Document concisely, accurately and timely.

If it is interests you, please reply to me with your updated resume and the pre-screening questions below:

• Please tell us more about your recent and total experience related to this position.
• Reason for looking for a job change?
• How soon can you start? Notice period?
• Current base & Expected base?

Best Regards!

Jyoti Teradal

Associate Manager

Job Location:

Sacramento, CA 95834.

About the Job:

Title of the Position: Automation Technician

The Automation Technician ensures reliable operation of sterile pharmaceutical manufacturing systems by installing, maintaining, calibrating, and troubleshooting automation components, process instrumentation, drives, motors, control devices, clean utility systems, and aseptic production equipment. The role supports continuous and compliant operations under cGMP, FDA 21 CFR Part 11, and cleanroom standards.

Responsibilities:

• Install, maintain, calibrate, and troubleshoot sensors and transmitters for pressure, temperature, flow, level, pH, conductivity, and environmental monitoring.
• Support in performing GMP‑compliant calibrations with complete traceability and accurate documentation.
• Install, maintain, and troubleshoot motors, pumps, fans, drives, control devices, and sterile manufacturing equipment.
• Perform conduit bending, cable routing, wire pulling, cable termination, tray installation, and equipment connections in accordance with plant procedures.
• Install and modify control panels, junction boxes, and instrumentation assemblies.
• Diagnose issues in circuits, protection components, sensors, actuators, drives, and automated machines.
• Use diagnostic tools such as multimeters, clamp meters, insulation testers, and calibration instruments.
• Support PLC, HMI, SCADA, BMS, and EMS platforms, including troubleshooting and system checks.
• Conduct loop checks, functional tests, FAT/SAT, commissioning, and support validation activities (IQ/OQ/PQ).
• Maintain and troubleshoot systems for PW, WFI, Clean Steam, CIP/SIP, HVAC/HEPA controls, and aseptic filling/packaging operations.
• Read and interpret P&IDs, wiring diagrams, schematics, ladder logic, and loop drawings.
• Maintain cleanroom support systems, including differential pressure controls, HEPA filtration, and environmental monitoring.
• Ensure compliance with cGMP, cleanroom classification requirements, FDA 21 CFR Part 11, and data integrity principles.
• Perform preventive, corrective, and predictive maintenance.
• Conduct root‑cause analysis and implement CAPA actions.
• Maintain accurate CMMS entries, calibration logs, and audit‑ready documentation.

Working Condition:

• Ability to work rotating, weekend, or extended shifts.
• Exposure to high‑noise areas (PPE provided).
• Frequent work on mezzanine floors, elevated platforms, ladders, and step‑ups.
• Work inside aseptic cleanrooms and controlled environments (ISO 5/7/8) wearing full gowning.
• Exposure to hot, cold, humid, or pressurized utility systems such as PW, WFI, Clean Steam, and HVAC units.
• Occasional work in tight spaces, behind panels, or equipment enclosures.
• Regular use of PPE, including sterile gowning, gloves, and eye protection.
• Ability to lift to 50 lbs and perform hands-on tasks for extended periods.

Qualifications:

Education:

• BE – Mechanical/Chemical from a reputed University

Experience: Minimum 5 to 10 years of professional experience in the field of pharmaceutical or manufacturing industry.

Knowledge, Skills, and Abilities: Functional:

• Strong troubleshooting skills across sensors, transmitters, motors, drives, actuators, control components, automated machinery, and process systems.
• Experience with conduit bending, tray installation, cable pulling, wire routing, cable dressing, and termination.
• Proficiency in installing and modifying panels, junction boxes, and equipment assemblies.
• Skilled in using multimeters, clamp meters, insulation testers, and calibration devices.
• Ability to install, connect, and terminate control wiring and instrument cabling for field devices.
• Understanding of circuits, drives, starters, protection components, actuators, and control system diagnostics.
• Ability to read and interpret P&IDs, schematics, wiring diagrams, ladder logic, and loop documentation.
• Knowledge of GMP requirements, sterile manufacturing, cleanroom practices, aseptic operations, and validation processes.
• Strong documentation discipline, attention to detail, and audit readiness.
• Ability to work efficiently and safely in regulated manufacturing environments.

Behavioral:

• Result oriented
• Innovative thinking
• Time Management, Professional Work Conduct at all times
• Problem-solving ability & High level of self-motivation
• Strong interpersonal relationship skills
• Strong written & verbal communication skills

Requirements:

• Valid driver's license and acceptable driving record
• Legally authorized to be employed in the United States
• Must live or be willing to move to the Sacramento Metropolitan Region (Approx 40 miles' radius)

Benefits:

• Competitive Salary: $80,000 - $90,000
• Yearly bonus eligibility
• Benefits: offers a wide variety of benefits and programs to support health and well-being, including medical, dental, and vision coverage
• Paid time off plan
• 401k savings plan

Company Description

At Titl, we simplify the real estate process by eliminating paperwork, legal obstacles, and delays associated with buying, owning, or selling a home. Our advanced technology ensures transparency and peace of mind throughout every transaction. We provide a modern and user-friendly way to handle property—designed for today and prepared for future needs.

Role Description

We're seeking an experienced Full-Stack Engineer to join our team working on a sophisticated property data research and report generation platform. This role involves building and maintaining enterprise-grade systems that automate property data extraction from government sources, generate comprehensive property reports, and manage complex business workflows including payments, authentication, and blockchain integration.

What You'll Work On

• Backend Services: Develop and maintain NestJS microservices handling property data scraping, PDF generation, report aggregation, and enterprise account management
• Frontend Applications: Build responsive Next.js applications with complex state management and real-time updates
• Data Pipeline: Work with automated scraping systems using Puppeteer and AI-powered document processing (Google Document AI, OpenAI)
• Integration Development: Implement OAuth flows, Stripe payment processing, webhook handling, and third-party API integrations
• Queue Management: Design and maintain Bull queue systems for background job processing and async workflows
• Blockchain Integration: Work with Polymesh blockchain for property ownership verification and asset tokenization
• Database Design: Create efficient Prisma schemas and optimize PostgreSQL queries for complex property data relationships

Required Technical Skills

Core Stack (Must Have)

• Backend: Advanced proficiency in NestJS with deep understanding of dependency injection, decorators, guards, and service patterns
• Frontend: Expert-level Next.js 14 (App Router) and React with TypeScript
• Database: Strong Prisma ORM experience and PostgreSQL optimization skills
• TypeScript: Production-level TypeScript across full stack
• API Design: RESTful API design, DTOs, validation, and Swagger documentation Infrastructure & DevOps
• Docker: Container orchestration and development environments
• Cloud Platforms: Google Cloud Platform (Cloud Storage, Cloud Run)
• Queue Systems: Bull or similar job queue systems (Redis-backed)
• Monorepo: Experience with pnpm workspaces or similar monorepo tooling Authentication & Payments
• OAuth 2.0: Multi-provider authentication (Google, Facebook, LinkedIn)
• JWT: Token-based authentication and authorization patterns
• Stripe: Payment processing, webhooks, subscription management, and usage-based billing Specialized Skills
• Web Scraping: Puppeteer or similar browser automation tools
• PDF Processing: PDF generation, manipulation, and data extraction
• AI/ML Integration: Experience with AI APIs (OpenAI, Google AI, etc.)
• Background Jobs: Async processing, retry logic, and error handling

Highly Desired Skills

• Blockchain: Polymesh or Ethereum blockchain integration experience
• Document Processing: OCR, document AI, or legal document processing
• Property/Real Estate Domain: Understanding of property records, deeds, liens, title commitments
• Legal Tech: Experience with legal document workflows or compliance systems
• Testing: Jest, testing-library, E2E testing frameworks
• Performance Optimization: Query optimization, caching strategies, lazy loading
• Security: OWASP best practices, rate limiting, encryption

Architecture & Design Requirements

You should be comfortable with:

• Design Patterns: Service-oriented architecture, repository pattern, factory pattern
• Dependency Injection: Understanding NestJS DI container and module system
• Database Relations: Complex multi-tenant data models with proper isolation
• State Management: React Context, server/client component patterns
• Error Handling: Comprehensive error handling, retry logic, fallback mechanisms, API Security: Rate limiting, API key management, webhook signature verification

Experience Requirements

• 5+ years of full-stack development experience
• 3+ years with TypeScript in production environments
• 2+ years with NestJS or similar enterprise Node.js frameworks
• 2+ years with modern React and Next.js
• Experience building production SaaS applications with multi-tenant architecture
• Track record of shipping complex features end-to-end
• Experience with third-party integrations and webhook systems
• Domain Knowledge (Preferred)
• Understanding of property data and real estate records
• Familiarity with government data systems and public records
• Knowledge of legal document structures (deeds, liens, mortgages, title commitments)
• Experience with regulated industries and compliance requirements
• Understanding of Miami-Dade County or similar municipal systems (bonus)

Development Practices

You should have experience with:

• Git workflows: Feature branches, pull requests, code review
• Documentation: Writing clear technical documentation and API specs
• Testing: Unit tests, integration tests, E2E tests
• CI/CD: Automated testing and deployment pipelines
• Agile: Working in iterative development cycles
• Code Quality: ESLint, Prettier, TypeScript strict mode

Problem-Solving Skills

We're looking for someone who can:

• Debug complex distributed systems across multiple services
• Optimize database queries and reduce API response times
• Design scalable architectures for high-volume data processing
• Handle edge cases in automated scraping and data extraction
• Troubleshoot integration issues with third-party services
• Implement robust error handling and monitoring
• Communication & Collaboration
• Clear written communication for documentation and code reviews
• Ability to explain technical concepts to non-technical stakeholders
• Collaborative approach to problem-solving
• Proactive in identifying and addressing technical debt
• Experience mentoring junior developers (preferred)
• Package Manager Note
• This project uses pnpm exclusively for monorepo management. Experience with pnpm workspaces is preferred, but npm/yarn monorepo experience transfers well.

What Makes You Stand Out

• Contributions to open-source projects
• Experience with LangChain or LangGraph for AI orchestration
• FastAPI or Python experience (for AI service integration)
• Understanding of title insurance or property ownership verification
• Experience with Puppeteer clusters and browser farm optimization
• Background in fintech or regulated industries
• Experience with multi-environment deployments (local, staging, production)

Working Style

This role requires:

• Attention to detail when working with legal and financial data
• Systematic approach to debugging complex systems
• Ability to work independently on ambiguous problems
• Comfort with reading and understanding existing codebases
• Pragmatic decision-making balancing speed and quality
• Tech Stack Summary: NestJS • Next.js • TypeScript • Prisma • PostgreSQL • Puppeteer • Bull • OAuth • Stripe • Google Document AI • OpenAI • Docker • GCP • Polymesh • pnpm
• This role offers the opportunity to work on challenging technical problems at the intersection of PropTech, LegalTech, and AI, building systems that handle real-world property data at scale.

PrideNow is seeking an experienced Maintenance Electrician to join our team in a full-time, direct hire role. This position requires a highly skilled professional capable of performing complex industrial electrical maintenance in a manufacturing environment. Candidates with journeyman-level experience or 7–10 years of industrial electrical experience are strongly encouraged to apply.

Shifts Available:

• 2nd Shift: Monday–Friday, 2:00 PM–10:00 PM
• Pay Rate: $34.25/hr. plus $1 shift differential for 2nd shift
• Comprehensive benefits package to include Medical, Vision, Dental, PTO, 401k + Match, FSA etc.

Job Responsibilities:

• Identify electrical hazards and safely isolate, ground, and prepare circuits and equipment for repair.
• Use required PPE to protect against arc flash and electrical shock.
• Read, interpret, and troubleshoot from blueprints and schematics, including 240V and 480V three-phase systems.
• Troubleshoot and maintain motor control centers, motor start circuits, control loops, generators, high-voltage switchgear, protective relays, and related equipment.
• Install, calibrate, and maintain electrical apparatus using engineering drawings and manuals.
• Install conduit, pull wiring, and perform proper terminations.
• Use electrical and electronic testing equipment such as multimeters, ammeters, megohm meters, high-potential testers, oscilloscopes, and digital probes.
• Install and maintain electrical distribution and control equipment including switches, relays, circuit breakers, and panels.
• Install and maintain drive systems including VFDs, eddy current drives, and DC drive systems.
• Perform installation, maintenance, and troubleshooting of PLC systems, including point-to-point wiring and equipment replacement.
• Install and calibrate pressure, temperature, flow, and level control devices.
• Observe operating systems to detect hazards and determine need for adjustments or modifications.
• Design and lay out control panels, set up complex control systems, and modify engineering drawings when required.
• Repair or replace faulty electrical equipment, including electronic controls, motors, meters, outlets, and panels.
• Document work performed and communicate issues, irregularities, and ongoing needs to the team.
• Maintain a safe and clean work environment following all procedures and regulations.
• Communicate effectively to resolve electrical problems.
• Assist in training line mechanics and apprentices as needed.
• Use the computerized maintenance management system (CMMS) to enter and retrieve information.
• Follow safe work practices at all times and ensure work does not endanger others.
• Perform additional duties as needed.

Additional Requirement:

• Physical examination is required.
• Must be able to train on 1st shift for 1-2 weeks if needed
• Journeyman or electrical license preferred or 5+ years of experience as an electrician in a manufacturing plant

#SM

K2 Pure Solutions, founded in 2010, is a Chlor-Alkali Manufacturer operating inherently safer technology to produce chemicals such as bleach for water disinfection in the surrounding Northern California communities. Bleach is the modern, preferred water treatment chemical displacing chlorine throughout the world. K2 Pure Solutions produces bleach onsite from nothing but salt, water, and electricity eliminating the danger and risk of a chlorine railcar release into communities trans-America. Other chlor-alkali products produced by K2 Pure Solutions include chlorine, hydrogen, hydrochloric acid, and caustic soda. 

ESSENTIAL DUTIES AND RESPONSIBILITIES

·      Interpret schematics, wiring diagrams, ladder logic, flow diagrams, P&ID's and construction blueprints

·      Will be working with low voltage

·      Install conduit and conduit bracing and fittings

·      Ensures that K2 Pure Solutions’ safety procedures are followed

·      Instrument calibration of equipment

·      Install tubing and perform instrument technician normal duties

COMPETENCIES

·      Must be familiar in instrumentation troubleshooting and repair techniques

·      Must be (or become) qualified to operate a man-lift, scissor lift, forklift and respirator fitted

·      PLC knowledge (Allen Bradley RSLogix 5000 preferable)

·      Must be able to work in high places and work in confined spaces

·      Must be knowledgeable of Miro-Motion Mass Flow meters, Hi-Tech Analyzers, level and flow meter installation and maintenance monitoring

·      Good PC working skills

·      Familiar with MS Office suite including Excel and Word

EDUCATION AND/OR EXPERIENCE

·      High School Education or Equivalent

·      ETEC degree preferred or relevant experience

Company Benefits

•           Subsidized medical, dental, and vision insurance

•           Medical and dependent care FSA options

•           401k company matching with immediate vesting

•           8 company paid holidays plus 2 floating holidays of your choice

•           Employer paid 1x annual life insurance

•           Paid sick leave

•           Paid vacation that increases with years of service

•           Regular social events for employee & employee’s family

Compensation - The starting base pay for this role is between $43.26 - $75.00 hr at the time of posting. The actual base pay depends on many factors, such as education, experience, and skills. Base pay is only one part of K2 Pure Solution’s competitive total compensation package that can includes strong benefits, perks, and bonuses. The base pay range is subject to change and may be modified in the future.

• Perform moderate to complex adjustments, maintenance, and repairs on packaging and pneumatic equipment.
• Conduct machine changeovers, troubleshoot mechanical and basic electrical systems, and make appropriate repairs.
• Execute daily preventative maintenance on packaging equipment, conveyors, compressors, and assist with equipment installations.
• Complete work orders for machinery repairs, interpret equipment manuals, diagnose issues, replace or repair parts, test, and adjust equipment.
• Utilize hand and power tools, electric meters, and material handling equipment in daily tasks.
• Set up full line configurations independently, identifying and reporting any faulty operations or defective materials.
• Ensure compliance with company policies, cGMPs, ethical practices, and SOPs, completing documentation such as operation logs and batch records accurately.
• Perform quality inspections during operations, adhering to product quality standards, and execute all required sampling and testing.
• Train and guide Packaging Operators in safe and effective machine operation, including breakdown and sanitation tasks.
• Adhere to proper gowning and hygiene as per SOPs and cGMPs, promoting a safe work environment by following all safety protocols.
• Support other mechanical or maintenance needs as required and maintain regular, punctual attendance with flexibility for extended hours and occasional weekend overtime.
  
  

• Perform additional job-related tasks as assigned by management.
  
  

• High school diploma or GED equivalent.
• Minimum of 2 years of experience in mechanical maintenance of bottle packaging lines, including troubleshooting, repairs, setup, and disassembly.
• 2+ years of experience in nutraceutical, supplement, food, or pharmaceutical manufacturing in a maintenance mechanic role for bottle packaging lines.
  
  

• Ability to work effectively in a team environment, read and interpret blueprints, schematics, manuals, and work orders.
• Proficient in using measuring equipment like micrometers, calipers, scales, and Volt/Ohm Meters.
• Familiarity with cGMP and OSHA standards; strong mechanical aptitude for machine repair and troubleshooting.
• Basic English reading and writing skills, with PLC knowledge being an added advantage.
• General proficiency with PCs.
  
  

Absolutely — here is a more polished, recruiter-friendly version you can use for LinkedIn, Indeed, or to share with candidates:

Kelly Services is seeking an Industrial Electrician for a direct hire opportunity with a packaging company in Florence, KY.

This is a full-time, permanent position on 1st shift, working Monday through Friday from 8:00am to 4:30pm. On-call availability may be required depending on facility needs.

This is an hourly position, with pay up to $42/hr. The company also offers a strong benefits package that includes health, dental, vision, 401(k), paid time off, life insurance, wellness perks, and more. Benefits begin the month following hire.

We are looking for someone with strong industrial electrical maintenance experience who can troubleshoot, repair, and maintain electrical systems, controls, and production equipment in a manufacturing environment. This is a highly hands-on role supporting both production equipment and plant systems, so the ideal candidate will be comfortable working independently, responding quickly to issues on the floor, and helping keep equipment running safely and efficiently.

Key Responsibilities

• Troubleshoot, maintain, and repair industrial electrical systems, machinery, controls, and plant equipment

• Diagnose issues using wiring diagrams, drawings, meters, gauges, and other testing equipment

• Repair and replace motors, electrical circuits, motor control centers, and PLC-related components

• Install, service, calibrate, and test electrical and electronic equipment

• Perform preventative maintenance to reduce downtime and prevent equipment failures

• Work closely with operators, maintenance teammates, other trades, and outside vendors to identify and resolve issues

• Maintain repair logs, calibration records, and preventative maintenance documentation

• Respond to equipment or facility issues quickly, especially when safety risks are involved

• Follow OSHA, site safety procedures, and electrical code requirements during all maintenance activities

Qualifications

• Minimum 5 years of hands-on electrical maintenance experience in an industrial or manufacturing environment

• Experience with automation, machine control panels, and PLC troubleshooting

• Strong understanding of industrial electrical systems, electrical theory, and troubleshooting practices

• Ability to read and interpret circuits, wiring diagrams, and technical drawings

• Familiarity with National Electrical Code (NEC) and National Electrical Safety Code (NESC) standards

• Ability to use hand tools, power tools, specialty tools, and diagnostic equipment effectively

• Electrical apprenticeship, vocational training, or technical certificate in electricity is preferred

• Scissor lift experience is a plus, but not required

Must haves:

• Electrical apprenticeship or formal training in electrical installation techniques.
• Demonstrated ability to read and interpret drawings.
• Possesses working knowledge of local codes as it applies to controls.
• Experienced in scope determination of installation materials. Able to work independently.
• Four years’ experience directly with controls installations.

Day to day:

Under general supervision, performs installation and checkout on a variety of systems utilizing codes, company procedures, engineering drawings and personal analysis. Works with electrical contractors as required. Develops a positive interface with the customer to ensure confidence and satisfaction with the system installation.

• Installs raceways, cables and wiring to meet local or national codes, standards and customer system requirements. Lays out electrical controls installation to provide lowest total installed cost.
• Mounts and terminates controls equipment as needed.
• May assist sales with electrical estimates, including walking retrofit projects.
• Determines and validates final termination points to equipment interfaced with the installed system (i.e. chillers, boilers, roof top units, etc.).
• Checks out wiring and terminations of field-installed equipment with test instruments as needed (i.e. volt meters, hand held testers, etc.).
• Keeps management informed of job needs, progress and issues.
• Completes paperwork, including but not limited to time sheets, expense reports, and on-site documentation. Provides feedback to Engineering on changes and keeps as-built drawings current.
• Resolve job site conflicts regarding installation issues or escalates concerns to management as required.
• Communicates with the customer as necessary upon arrival and before leaving the work site.
• Adheres to safety programs and policies.
• Performs other related duties as assigned.

• Experienced with 480 VAC , 3 phase along with lower voltages.
• Able to trouble shoot and repair semi-automated production equipment.
• Experience with trouble shooting and preventive maintenance of large DC and AC motors.
• Able to effectively use standard electrical test equipment including volt meter , amprobe and megger
• Familiar with and able to safely apply with the National Electrical Code and other local safety codes, policies, and procedures.
• Able to read and interpret facility blueprints and equipment technical manuals.
• Able to perform electrical construction projects and repair .

• Experience with troubleshooting Allen Bradley and Delta V Control Logix PLCs .
• Experience with AC and DC drives in fan, pump, and conveyor applications.
• Ability to set up AC and DC drives.
• Experience with HMI touch screens.
• AutoCAD.

• Able to lift up to 50 pounds.
• Willing and able to work varying shifts, nights, weekends, holidays, and overtime, as needed.
• Willing to work in a tobacco free environment.

• 401(k)
• 401(k) matching
• Dental insurance
• Employee assistance program
• Flexible spending account
• Health insurance
• Health savings account
• Life insurance
• Paid time off
• Referral program
• Retirement plan
• Tuition reimbursement
• Vision insurance

• Experienced with 480 VAC , 3 phase along with lower voltages.
• Able to trouble shoot and repair semi-automated production equipment.
• Experience with trouble shooting and preventive maintenance of large DC and AC motors.
• Able to effectively use standard electrical test equipment including volt meter , amprobe and megger
• Familiar with and able to safely apply with the National Electrical Code and other local safety codes, policies, and procedures.
• Able to read and interpret facility blueprints and equipment technical manuals.
• Able to perform electrical construction projects and repair .

• Experience with troubleshooting Allen Bradley and Delta V Control Logix PLCs .
• Experience with AC and DC drives in fan, pump, and conveyor applications.
• Ability to set up AC and DC drives.
• Experience with HMI touch screens.
• AutoCAD.

• Able to lift up to 50 pounds.
• Willing and able to work varying shifts, nights, weekends, holidays, and overtime, as needed.
• Willing to work in a tobacco free environment.

• 401(k)
• 401(k) matching
• Dental insurance
• Employee assistance program
• Flexible spending account
• Health insurance
• Health savings account
• Life insurance
• Paid time off
• Referral program
• Retirement plan
• Tuition reimbursement
• Vision insurance

• Experienced with 480 VAC , 3 phase along with lower voltages.
• Able to trouble shoot and repair semi-automated production equipment.
• Experience with trouble shooting and preventive maintenance of large DC and AC motors.
• Able to effectively use standard electrical test equipment including volt meter , amprobe and megger
• Familiar with and able to safely apply with the National Electrical Code and other local safety codes, policies, and procedures.
• Able to read and interpret facility blueprints and equipment technical manuals.
• Able to perform electrical construction projects and repair .

• Experience with troubleshooting Allen Bradley and Delta V Control Logix PLCs .
• Experience with AC and DC drives in fan, pump, and conveyor applications.
• Ability to set up AC and DC drives.
• Experience with HMI touch screens.
• AutoCAD.

• Able to lift up to 50 pounds.
• Willing and able to work varying shifts, nights, weekends, holidays, and overtime, as needed.
• Willing to work in a tobacco free environment.

• 401(k)
• 401(k) matching
• Dental insurance
• Employee assistance program
• Flexible spending account
• Health insurance
• Health savings account
• Life insurance
• Paid time off
• Referral program
• Retirement plan
• Tuition reimbursement
• Vision insurance

• Experienced with 480 VAC , 3 phase along with lower voltages.
• Able to trouble shoot and repair semi-automated production equipment.
• Experience with trouble shooting and preventive maintenance of large DC and AC motors.
• Able to effectively use standard electrical test equipment including volt meter , amprobe and megger
• Familiar with and able to safely apply with the National Electrical Code and other local safety codes, policies, and procedures.
• Able to read and interpret facility blueprints and equipment technical manuals.
• Able to perform electrical construction projects and repair .

• Experience with troubleshooting Allen Bradley and Delta V Control Logix PLCs .
• Experience with AC and DC drives in fan, pump, and conveyor applications.
• Ability to set up AC and DC drives.
• Experience with HMI touch screens.
• AutoCAD.

• Able to lift up to 50 pounds.
• Willing and able to work varying shifts, nights, weekends, holidays, and overtime, as needed.
• Willing to work in a tobacco free environment.

• 401(k)
• 401(k) matching
• Dental insurance
• Employee assistance program
• Flexible spending account
• Health insurance
• Health savings account
• Life insurance
• Paid time off
• Referral program
• Retirement plan
• Tuition reimbursement
• Vision insurance

• Experienced with 480 VAC , 3 phase along with lower voltages.
• Able to trouble shoot and repair semi-automated production equipment.
• Experience with trouble shooting and preventive maintenance of large DC and AC motors.
• Able to effectively use standard electrical test equipment including volt meter , amprobe and megger
• Familiar with and able to safely apply with the National Electrical Code and other local safety codes, policies, and procedures.
• Able to read and interpret facility blueprints and equipment technical manuals.
• Able to perform electrical construction projects and repair .

• Experience with troubleshooting Allen Bradley and Delta V Control Logix PLCs .
• Experience with AC and DC drives in fan, pump, and conveyor applications.
• Ability to set up AC and DC drives.
• Experience with HMI touch screens.
• AutoCAD.

• Able to lift up to 50 pounds.
• Willing and able to work varying shifts, nights, weekends, holidays, and overtime, as needed.
• Willing to work in a tobacco free environment.

• 401(k)
• 401(k) matching
• Dental insurance
• Employee assistance program
• Flexible spending account
• Health insurance
• Health savings account
• Life insurance
• Paid time off
• Referral program
• Retirement plan
• Tuition reimbursement
• Vision insurance

• Experienced with 480 VAC , 3 phase along with lower voltages.
• Able to trouble shoot and repair semi-automated production equipment.
• Experience with trouble shooting and preventive maintenance of large DC and AC motors.
• Able to effectively use standard electrical test equipment including volt meter , amprobe and megger
• Familiar with and able to safely apply with the National Electrical Code and other local safety codes, policies, and procedures.
• Able to read and interpret facility blueprints and equipment technical manuals.
• Able to perform electrical construction projects and repair .

• Experience with troubleshooting Allen Bradley and Delta V Control Logix PLCs .
• Experience with AC and DC drives in fan, pump, and conveyor applications.
• Ability to set up AC and DC drives.
• Experience with HMI touch screens.
• AutoCAD.

• Able to lift up to 50 pounds.
• Willing and able to work varying shifts, nights, weekends, holidays, and overtime, as needed.
• Willing to work in a tobacco free environment.

• 401(k)
• 401(k) matching
• Dental insurance
• Employee assistance program
• Flexible spending account
• Health insurance
• Health savings account
• Life insurance
• Paid time off
• Referral program
• Retirement plan
• Tuition reimbursement
• Vision insurance

• Experienced with 480 VAC , 3 phase along with lower voltages.
• Able to trouble shoot and repair semi-automated production equipment.
• Experience with trouble shooting and preventive maintenance of large DC and AC motors.
• Able to effectively use standard electrical test equipment including volt meter , amprobe and megger
• Familiar with and able to safely apply with the National Electrical Code and other local safety codes, policies, and procedures.
• Able to read and interpret facility blueprints and equipment technical manuals.
• Able to perform electrical construction projects and repair .

• Experience with troubleshooting Allen Bradley and Delta V Control Logix PLCs .
• Experience with AC and DC drives in fan, pump, and conveyor applications.
• Ability to set up AC and DC drives.
• Experience with HMI touch screens.
• AutoCAD.

• Able to lift up to 50 pounds.
• Willing and able to work varying shifts, nights, weekends, holidays, and overtime, as needed.
• Willing to work in a tobacco free environment.

• 401(k)
• 401(k) matching
• Dental insurance
• Employee assistance program
• Flexible spending account
• Health insurance
• Health savings account
• Life insurance
• Paid time off
• Referral program
• Retirement plan
• Tuition reimbursement
• Vision insurance

• Experienced with 480 VAC , 3 phase along with lower voltages.
• Able to trouble shoot and repair semi-automated production equipment.
• Experience with trouble shooting and preventive maintenance of large DC and AC motors.
• Able to effectively use standard electrical test equipment including volt meter , amprobe and megger
• Familiar with and able to safely apply with the National Electrical Code and other local safety codes, policies, and procedures.
• Able to read and interpret facility blueprints and equipment technical manuals.
• Able to perform electrical construction projects and repair .

• Experience with troubleshooting Allen Bradley and Delta V Control Logix PLCs .
• Experience with AC and DC drives in fan, pump, and conveyor applications.
• Ability to set up AC and DC drives.
• Experience with HMI touch screens.
• AutoCAD.

• Able to lift up to 50 pounds.
• Willing and able to work varying shifts, nights, weekends, holidays, and overtime, as needed.
• Willing to work in a tobacco free environment.

• 401(k)
• 401(k) matching
• Dental insurance
• Employee assistance program
• Flexible spending account
• Health insurance
• Health savings account
• Life insurance
• Paid time off
• Referral program
• Retirement plan
• Tuition reimbursement
• Vision insurance

• Experienced with 480 VAC , 3 phase along with lower voltages.
• Able to trouble shoot and repair semi-automated production equipment.
• Experience with trouble shooting and preventive maintenance of large DC and AC motors.
• Able to effectively use standard electrical test equipment including volt meter , amprobe and megger
• Familiar with and able to safely apply with the National Electrical Code and other local safety codes, policies, and procedures.
• Able to read and interpret facility blueprints and equipment technical manuals.
• Able to perform electrical construction projects and repair .

• Experience with troubleshooting Allen Bradley and Delta V Control Logix PLCs .
• Experience with AC and DC drives in fan, pump, and conveyor applications.
• Ability to set up AC and DC drives.
• Experience with HMI touch screens.
• AutoCAD.

• Able to lift up to 50 pounds.
• Willing and able to work varying shifts, nights, weekends, holidays, and overtime, as needed.
• Willing to work in a tobacco free environment.

• 401(k)
• 401(k) matching
• Dental insurance
• Employee assistance program
• Flexible spending account
• Health insurance
• Health savings account
• Life insurance
• Paid time off
• Referral program
• Retirement plan
• Tuition reimbursement
• Vision insurance

• Experienced with 480 VAC , 3 phase along with lower voltages.
• Able to trouble shoot and repair semi-automated production equipment.
• Experience with trouble shooting and preventive maintenance of large DC and AC motors.
• Able to effectively use standard electrical test equipment including volt meter , amprobe and megger
• Familiar with and able to safely apply with the National Electrical Code and other local safety codes, policies, and procedures.
• Able to read and interpret facility blueprints and equipment technical manuals.
• Able to perform electrical construction projects and repair .

• Experience with troubleshooting Allen Bradley and Delta V Control Logix PLCs .
• Experience with AC and DC drives in fan, pump, and conveyor applications.
• Ability to set up AC and DC drives.
• Experience with HMI touch screens.
• AutoCAD.

• Able to lift up to 50 pounds.
• Willing and able to work varying shifts, nights, weekends, holidays, and overtime, as needed.
• Willing to work in a tobacco free environment.

• 401(k)
• 401(k) matching
• Dental insurance
• Employee assistance program
• Flexible spending account
• Health insurance
• Health savings account
• Life insurance
• Paid time off
• Referral program
• Retirement plan
• Tuition reimbursement
• Vision insurance

• Experienced with 480 VAC , 3 phase along with lower voltages.
• Able to trouble shoot and repair semi-automated production equipment.
• Experience with trouble shooting and preventive maintenance of large DC and AC motors.
• Able to effectively use standard electrical test equipment including volt meter , amprobe and megger
• Familiar with and able to safely apply with the National Electrical Code and other local safety codes, policies, and procedures.
• Able to read and interpret facility blueprints and equipment technical manuals.
• Able to perform electrical construction projects and repair .

• Experience with troubleshooting Allen Bradley and Delta V Control Logix PLCs .
• Experience with AC and DC drives in fan, pump, and conveyor applications.
• Ability to set up AC and DC drives.
• Experience with HMI touch screens.
• AutoCAD.

• Able to lift up to 50 pounds.
• Willing and able to work varying shifts, nights, weekends, holidays, and overtime, as needed.
• Willing to work in a tobacco free environment.

• 401(k)
• 401(k) matching
• Dental insurance
• Employee assistance program
• Flexible spending account
• Health insurance
• Health savings account
• Life insurance
• Paid time off
• Referral program
• Retirement plan
• Tuition reimbursement
• Vision insurance

• Experienced with 480 VAC , 3 phase along with lower voltages.
• Able to trouble shoot and repair semi-automated production equipment.
• Experience with trouble shooting and preventive maintenance of large DC and AC motors.
• Able to effectively use standard electrical test equipment including volt meter , amprobe and megger
• Familiar with and able to safely apply with the National Electrical Code and other local safety codes, policies, and procedures.
• Able to read and interpret facility blueprints and equipment technical manuals.
• Able to perform electrical construction projects and repair .

• Experience with troubleshooting Allen Bradley and Delta V Control Logix PLCs .
• Experience with AC and DC drives in fan, pump, and conveyor applications.
• Ability to set up AC and DC drives.
• Experience with HMI touch screens.
• AutoCAD.

• Able to lift up to 50 pounds.
• Willing and able to work varying shifts, nights, weekends, holidays, and overtime, as needed.
• Willing to work in a tobacco free environment.

• 401(k)
• 401(k) matching
• Dental insurance
• Employee assistance program
• Flexible spending account
• Health insurance
• Health savings account
• Life insurance
• Paid time off
• Referral program
• Retirement plan
• Tuition reimbursement
• Vision insurance