Quad Remote Entry Level Jobs in Usa
6 positions found
Quad's entry-level manufacturing position includes the opportunity to learn the printing process from the ground up and advance in a progressive environment. In this position you will assist in the creation of various well-known magazines/catalogs/newspaper inserts and other related products in our Press department. Part Time Manufacturing wage is $17.50 / hr.
Shift Availability: 2-3 work week schedule
* Week 1- (2) 12-hour shifts ( 7 a.m. - 7 p.m. or 7 p.m. - 7 a.m .)
* Week 2- (3) 12-hour shifts
Job duties for this position include, but are not limited to:
* Remove product from the end of the printing press or finishing machine.
* Stack loose signatures off a pallet and transfer to table and then place into a collator hopper.
* Transfer completed bundles of product off machine conveyor and stack onto pallets, then place mail bags onto pallet.
* Move product with a hand jack or motorized Raymond or Big Joe lift.
* Comply with all quality, safety and work rules and regulations.
* Effectively communicate with other members of the staff.
* Remove skids of product using a Big Joe and Hand Truck.
* Assist other crew members with various duties including webbing up of the press and/or special handwork in order to meet customer requests.
* Follow all clean-up and housekeeping procedures.
Qualifications:
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
* At least 18-years of age or older
* A solid work history
* Ability to work well in a team environment.
* Ability to follow instructions and work independently.
* The ability to read and write; possess good verbal and written comprehension
* Strong interest in manufacturing and a desire to learn.
* The ability to take stacks (average 10-30 lbs.) using repetitive hand/wrist movement, off of the end of a machine (2-4 feet high) and stack product on skids from floor level to 5 feet high using repetitive bending and twisting.
* The ability to remove skids (weighing up to 2400 lbs.) by using a Big Joe and Hand Truck
* Ability to lift stacks of end boards (30 lbs.) as needed.
* Lift rolls of banding strap (60 lb.) as needed.
* Moving logs as needed without lifting them (stand them up or lie them down)
* Ability to adjust stacker using a touch screen.
* Ability to use a vibrating jogging table.
* The ability to take stacks of loose signatures ranging (5-30 lbs.) off a pallet of up to 48" in height and transfer to tabletop work surface 42", and then place into a collator hopper.
* Ability to transfer completed bundles of product (10-30 lbs.) off machine conveyor and stack onto pallets or into mail bags that potentially weigh from 5 to 75 lbs. Then place mail bags onto pallet.
* The ability to use a hand jack or motorized Raymond or Big Joe lift.
* The ability to use a computer, scissors, and tape gun.
* The ability to read and write; possess good verbal and written comprehension.
* 12 hour shifts (7am-7pm or 7pm-7am)
Additional Shift Information
* Must be able to attend 1 week career readiness workshop from 9:30am-1pm
* Must be able to stand for your full 12-hour shift.
Quad is proud to be an equal opportunity employer and values diversity. We are committed to creating a place of belonging — a space where employees do not need to sacrifice who they are to exist and grow in our workplace. Quad does not discriminate on any unlawful basis including race, religion, color, national origin, disability, gender, gender identity, sexual orientation, age, marital status, veteran status, genetic information, or any other basis prohibited by applicable federal, state, or local laws. Quad also prohibits harassment of applicants and employees based on any of these protected categories.
Drug-Free Workplace
Quad's entry-level manufacturing position includes the opportunity to learn the printing process from the ground up and advance in a progressive environment. In this position you will assist in the creation of various well-known magazines/catalogs/newspaper inserts and other related products in our Press department. Part Time Manufacturing wage is $17.50 / hr.
Shift Availability: 2-3 work week schedule
- Week 1- (2) 12-hour shifts (7 a.m. - 7 p.m. or 7 p.m. - 7 a.m.)
- Week 2- (3) 12-hour shifts
Job duties for this position include, but are not limited to:
- Remove product from the end of the printing press or finishing machine.
- Stack loose signatures off a pallet and transfer to table and then place into a collator hopper.
- Transfer completed bundles of product off machine conveyor and stack onto pallets, then place mail bags onto pallet.
- Move product with a hand jack or motorized Raymond or Big Joe lift.
- Comply with all quality, safety and work rules and regulations.
- Effectively communicate with other members of the staff.
- Remove skids of product using a Big Joe and Hand Truck.
- Assist other crew members with various duties including webbing up of the press and/or special handwork in order to meet customer requests.
- Follow all clean-up and housekeeping procedures.
Qualifications:
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
- At least 18-years of age or older
- A solid work history
- Ability to work well in a team environment.
- Ability to follow instructions and work independently.
- The ability to read and write; possess good verbal and written comprehension
- Strong interest in manufacturing and a desire to learn.
- The ability to take stacks (average 10-30 lbs.) using repetitive hand/wrist movement, off of the end of a machine (2-4 feet high) and stack product on skids from floor level to 5 feet high using repetitive bending and twisting.
- The ability to remove skids (weighing up to 2400 lbs.) by using a Big Joe and Hand Truck
- Ability to lift stacks of end boards (30 lbs.) as needed.
- Lift rolls of banding strap (60 lb.) as needed.
- Moving logs as needed without lifting them (stand them up or lie them down)
- Ability to adjust stacker using a touch screen.
- Ability to use a vibrating jogging table.
- The ability to take stacks of loose signatures ranging (5-30 lbs.) off a pallet of up to 48” in height and transfer to tabletop work surface 42”, and then place into a collator hopper.
- Ability to transfer completed bundles of product (10-30 lbs.) off machine conveyor and stack onto pallets or into mail bags that potentially weigh from 5 to 75 lbs. Then place mail bags onto pallet.
- The ability to use a hand jack or motorized Raymond or Big Joe lift.
- The ability to use a computer, scissors, and tape gun.
Additional Shift Information
- Must be able to stand for your full 12-hour shift.
- Successfully complete 1 week Career Readiness Workshop
Quad is proud to be an equal opportunity employer and values diversity. We are committed to creating a place of belonging — a space where employees do not need to sacrifice who they are to exist and grow in our workplace. Quad does not discriminate on any unlawful basis including race, religion, color, national origin, disability, gender, gender identity, sexual orientation, age, marital status, veteran status, genetic information, or any other basis prohibited by applicable federal, state, or local laws. Quad also prohibits harassment of applicants and employees based on any of these protected categories.
Drug-Free Workplace
Quad in Winchester, VA is seeking candidates with mechanical experience to become Press Rolltenders. A Rolltender's primary responsibility is to consistently load rolls of paper onto a printing press. Other responsibilities include but are not limited to:
* Understanding standard operating procedures of the department
* Coordinate plates and tickets for upcoming jobs and hang paper according to job tickets.
* Inspect rolls of paper for blemishes or tears and cuts away any damage.
* Set up and make splices, bend and hang plates as well as hang blankets and assist with webbing up press.
* Ensure correct ink is available for job and check ink fountains regularly.
* Set fold during make-readies and check trim sheets to proof and complete necessary roll reports and paperwork accurately.
* Communicate effectively with plate room and paper warehouse and coordinate changing of ink, etch, and silicone totes as needed.
* Wash up the press and assist with preventative maintenance.
Qualifications
* Candidates with previous jogger/entry level experience a plus
* Strong mechanical abilities and previous knowledge of presses and roll stands are a plus.
* Ability to perform basic math calculations are essential.
* Good verbal and written comprehension skills are a must.
* Must be able to thrive in a team environment and work independently with minimal supervision.
* This position also requires the ability to bend and lift 10-20 pounds continuously, ability to lift up to 70 pounds occasionally, stand long hours, use hands and wrists continuously and use vision in order to identify defects, performing repetitious tasks in a fast-paced atmosphere with or without a reasonable accommodation.
We offer excellent benefits to eligible employees, including 401(k), holidays, vacations and more.
Quad is proud to be an equal opportunity employer. We are committed to creating a place of belonging — a space where employees do not need to sacrifice who they are to exist and grow in our workplace. Quad does not discriminate on any unlawful basis including race, religion, color, national origin, disability, gender, gender identity, sexual orientation, age, marital status, veteran status, genetic information, or any other basis prohibited by applicable federal, state, or local laws. Quad also prohibits harassment of applicants and employees based on any of these protected categories.
Drug-Free Workplace
Quad is seeking PT Finishing Technicians to work in the Martinsburg, WV plant (Caperton Blvd.) The position will include on-the-job and technical classroom training.
This is your opportunity to enhance your skills working with the industry’s most advanced printing equipment. Plus, with a tradition of innovation, history of strength, and supportive culture behind you, your career will be primed for advancement. The Finishing Technician is an entry level position. Job duties include, but are not limited to:
- Understand standard operating procedures of the department and follow them consistently
- Responsible for own safety and promoting and maintaining a safe and clean working environment
- Responsible for feeding pockets and down-piling products on the machine
- Straighten & align paper signatures
- Correctly load feeder pockets with signatures
- Inspect & stack the final product
- Consumption/assignment of all press/supplied product load flags at the end of job
- Routing, staging, and documenting of product moved from machine
- Other tasks as requested by supervisor, department, or management
Qualifications:
- Ability to work one 12 hour shift (either 7 a.m. - 7 p.m. or 7 p.m. - 7 a.m.) including days, nights, weekends, and holidays is required.
- Ability to work overtime as needed is required.
- Candidates must be at least 18 years of age.
- Successful candidates must be able to perform the following: lift 10-15 pounds continuously, lift 50 pounds occasionally, stand for long hours, use hands and wrists continuously in controlled movement, receive and follow instructions, and use vision to identify defects with or without reasonable accommodation.
- Good verbal and written comprehension, the ability to thrive in a team environment, and work independently with minimal supervision is required.
- The ability to perform basic math calculations is required.
Manufacturing/warehouse experience preferred.
We offer excellent benefits to eligible employees, including 401(k), holidays, vacations and more.
Quad is proud to be an equal opportunity employer. We are committed to creating a place of belonging — a space where employees do not need to sacrifice who they are to exist and grow in our workplace. Quad does not discriminate on any unlawful basis including race, religion, color, national origin, disability, gender, gender identity, sexual orientation, age, marital status, veteran status, genetic information, or any other basis prohibited by applicable federal, state, or local laws. Quad also prohibits harassment of applicants and employees based on any of these protected categories.
Drug-Free Workplace
Doctor of Medicine | Emergency Medicine
Location: Lynchburg, VA
Employer: Weatherby Healthcare
Pay: Competitive weekly pay (inquire for details)
Shift Information: 4 days x 10 hours
Start Date: ASAP
About the Position
LocumJobsOnline is working with Weatherby Healthcare to find a qualified Emergency Medicine MD in Lynchburg, Virginia, 24501!
If this opportunity sounds right for you, give us a call today to speak with an expert Weatherby consultant for details.
- Shifts available 6am-4pm through 10pm-8am with 10 hour durations
- 73,711 annual emergency department volume
- Triple/quad coverage model
- Level II trauma center
- Paid malpractice insurance; pre-paid travel and housing expenses
- Assignment details and time entry in online portal
- Competitive compensation
- 24-hour access to your Weatherby Healthcare consultant
- Charter member of NALTO
About Weatherby Healthcare
Weatherby Healthcare is part of the CHG Healthcare family of staffing companies, which leads the locum tenens industry in size and quality. Since 1995, we’ve leveraged our nationwide network to connect locums professionals with the best jobs. We offer specialty-focused consultants for nearly 100 specialties of physicians, PAs, and NPs. These experts simplify the locums process from start to finish, backing you up with award-winning 24/7 support. In addition to providing competitive pay and malpractice coverage, we assist you with credentialing, licensing, travel, and housing. To learn more about how we make your life easier, visit
1675417EXPPLAT
Job Description
Arconic is currently in search of an entry level Electrical Engineer to join our Plate Department based in our Davenport, IA location.
At Arconic, we take pride in our work and our innovative products and technologies that advance sustainable solutions for a better world. We strive to create a safe, inclusive, and collaborative workplace with competitive benefits, development opportunities and a culture that values and rewards employees on all levels of the organization.
Job Summary:
This entry level Electrical Engineer is a great opportunity to apply your technical skills while coordinating numerous capital projects across the Plate department. This role is driven by self-directed work and collaborative efforts with a team of Electrical Engineers, Technical staff, maintenance, and production across the department.
The Electrical Engineer reports to the Lead Electrical Engineer in the department and will work Monday through Friday during daytime hours. You will support off-shifts as needed for your respective projects.
In this role, you will:
- Coordinate all phases of assigned area electrical engineering projects from concept, scope development, written specifications, bid solicitations, design, manufacturing, equipment commissioning, and project closure.
- Lead and participate in problem solving efforts with multi-discipline technical staff, maintenance and production.
- Use PI Vision and Data Link to analyze process issues and provide input to solve process problems.
- Create and develop electrical control solutions that will support process improvements and improve equipment reliability.
- Assist production and maintenance with equipment and process issues.
- PLC/HMI and controls redesign and upgrades of existing processes.
- Install and troubleshoot camera systems on industrial equipment.
- Incorporate SMART Manufacturing principles and tools into automated inspection systems to improve processes, data collection/analysis, and drive quick results in recovery improvements.
Qualifications
You have:
- Bachelor’s Degree in Electrical Engineering Technology or Electrical Engineering from an accredited institution
- 1-3 years of Electrical Engineering experience (including Internship)
- Employees must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire Visa sponsorship is not available for this position
- This position requires access to controlled technology, as defined in the Export Administration Regulations (15 C.F.R.
- 730, et seq.) and/or the International Traffic in Arms Regulations (ITAR). Authorizations from the relevant government agency may be required to meet export control compliance requirements.
Exceptional Candidates possess:
- Manufacturing experience in a highly industrial environment
- 1-3 years' experience with PLC's, HMI's, AC/DC drives & motors, measuring devices and ethernet cameras
- Proficiency with Rockwell programming software (i.e.: RS Logix and FactoryView)
- Proficiency in Microsoft Office Suite and Project programs
- Good oral and written communication skills in a variety of settings (shop floor, peers, plant leadership, etc)
- Demonstrated success as a project implementation manager, including budget and schedule development.
About Us
Arconic Corporation is a leading provider of aluminum sheet, plate and extrusions, as well as innovative architectural products, that advance the automotive, aerospace, commercial transportation, industrial and building and construction markets. Building on more than a century of innovation, Arconic helps to transform the way we fly, drive, and build.
We live our core values and commit to delivering sustainable value to our customers, our employees, our communities and our stakeholders.
At Arconic, we:
Act With Integrity.
We lead with respect, honesty, transparency and accountability.
Safeguard our Future.
We protect and improve the health and safety of our employees, communities and environment.
Grow Stronger Together.
We cultivate an inclusive and diverse culture that advocates for equity.
Earn Customer Loyalty.
We build customer partnerships through best-in-class products and service.
Drive Operational Excellence.
We pursue continuous improvement through innovation, agility, people development and collaboration.
Create Value.
We achieve success by generating and growing value for our stakeholders.
This position is subject to Export Control Law
This position requires access to controlled technology, as defined in the Export Administration Regulations (15 C.F.R.
- 730, et seq.) and/or the International Traffic in Arms Regulations (ITAR). Authorizations from the relevant government agency may be required to meet export control compliance requirements.
Equal Employment Opportunity Statement
Arconic is an equal opportunity employer. We take action to ensure equal opportunity for all applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, Veteran status, or other legally protected characteristics.
About The Team
ABOUT Davenport Works
Davenport Works is the country’s largest aluminum rolling mill, it was opened in 1948 and currently employs more than 2,000 people and ships product worldwide. It is in Riverdale in the Quad Cities (Davenport and Bettendorf in southeastern Iowa, and Rock Island and Moline in northwestern Illinois). The Quad Cities is 3 hours south-west of Chicago, 4 hours north of St. Louis, and less than 3 hours from Des Moines. The Quad Cities is home to St. Ambrose University among 8 educational institutes. Major outdoor summer music festivals include the Bix Beiderbecke Memorial Jazz Festival, Mississippi Valley Blues Festival, and River Roots Live.
