Qa Maintenance Jobs in Usa

Job Description

King Soopers Bakery Manufacturing

Lead the effective execution of all plant maintenance and assigned projects, in support of safety, quality and continuous improvement. Perform all jobs safely, efficiently and accurately to maintain and improve the performance of the entire plant in the areas of Safety, Quality, Reliability (SQR) and our Customer 1st strategy. Provide leadership that embodies our 7 Kroger Manufacturing High Performance Work System principles. Demonstrate the company's core values of respect, honesty, integrity, diversity, inclusion and safety.

Responsibilities

• Ensure a safe, efficient and effective use of all supervised craft resources
• Supervise and coach direct reports in the performance of their duties; complete performance reviews and provide feedback to direct reports
• Ensure compliance to Occupational Safety and Health Administration (OSHA), Environmental Protection Agency (EPA), Department of Health and Environmental Control (DHEC), National Electrical Code (NEC), and Food and Drug Administration (FDA) regulations
• Direct mechanics in the performance of approved maintenance work including quality control, duration, cost and thoroughness
• Assign and inspect all planned preventative maintenance (PPM) work orders
• Review available planned job packages for completeness and correctness; refine and finalize labor, materials, parts, methods and priorities
• Identify, arrange and track the skills training and development needs of each team member; ensure prompt assignment of mechanics to specific jobs relative to individual abilities
• Ensure that good housekeeping and safe work practices are followed throughout the facility
• Clean shop areas daily, including spare parts room and offices
• Provide support and leadership in troubleshooting equipment
• Ensure all labor, parts and work are reported daily through the Computerized Maintenance Management System (CMMS)
• Follow established programs, policies and practices to produce safe, quality foods that meet regulatory and company requirements
• Accountable to the Kroger Manufacturing Food Safety and Quality Principles
• Must be able to perform the essential job functions of this position with or without reasonable accommodation
• Must be able to work around ingredients and/or finished products known to contain food allergens

Minimum Qualifications

• Bachelor's Degree a related field or 5 years of progressive experience in maintenance supervision
• Experience in the food industry dealing with preventative/predictive maintenance process, technical guidance and development of the maintenance work force
• Functional knowledge and use of Microsoft Office and CMMS
• Proven leadership skills
• Excellent communication skills
• Strong analytical ability
• Knowledge of Food Safety Principles, Good Manufacturing Practices (GMP), and EPA and OSHA requirements

Desired Qualifications

• Other Bachelor's degree in mechanical, electrical or chemical engineering
• Experience in continuous improvement activities
• Plant maintenance supervisor

At C&W Services, we live by the belief that Better Never Settles. We're dedicated to creating a positive impact globally, and we're looking for talented individuals to join our team.

C&W Services provides compelling benefits, including:

• Weekly Pay
• Comprehensive Benefits that start on your first day
• Training, Development, and Advancement Opportunities
• A Clean and Cutting-Edge Facility
• A Safety-First Culture

About the Role

As a Facilities Maintenance Technician, you’ll perform maintenance and repair of mechanical, electrical, and other building systems in accordance with standard operating procedures, manufacturer specifications, and safety policies. While this role does not include direct supervisory responsibilities, you may provide mentorship and training to entry-level technicians.

You’ll support multiple industrial facilities within the account, performing both preventative and reactive maintenance to keep operations running safely and efficiently.

Key Responsibilities

• Maintenance: Perform routine and preventive maintenance on buildings and equipment, including HVAC, carpentry, plumbing, and electrical work.
• Execution: Complete work orders as assigned by supervisors, ensuring all requests are documented and finalized properly.
• Work Orders: Respond to, execute, and close out requests in the CMMS system, recording accurate time, work performed, and materials used for tracking and billing.
• Support: Provide general maintenance support across multiple facilities as needed.
• Safety: Follow all C&W Services safety procedures and maintain a safe, clean work environment.

Basic Qualifications

• High school diploma or equivalent.
• Minimum of one (1) year of relevant experience in facilities maintenance or a related field.
• General knowledge of tools, building maintenance procedures, and industrial facility equipment.
• Ability to perform repairs on basic electrical, plumbing, and mechanical systems.
• Strong written and mathematical skills.
• Valid driver’s license and reliable personal vehicle required. Travel between sites will be a requirement of the role.

Preferred Qualifications

• Experience or knowledge of HVAC and Building Management Systems (BMS).
• Experience or knowledge of plumbing systems.
• Experience or knowledge of Fire Life Safety (FLS) systems.
• Experience troubleshooting general building systems.

Physical Demands

• Ability to reach overhead, kneel, squat, climb steps/ladders, and lift up to 50 lbs.
• Must be able to move between departments and facilities throughout the workday.
• Regularly required to type and document work in a computerized maintenance system.
• Work may be performed in a warehouse or industrial setting with fluctuating temperatures.

Why C&W Services?

We’re a global company with over 400 offices in 60 countries. We're proud of our diverse family of employees and are committed to creating an inclusive workplace. Recognized by the Human Rights Foundation as a Best Place to Work for LGBTQI+ individuals, we continue to build a culture of inclusion and respect.

What’s Next?

Ready to take the next step in your career? Apply today and join a team that’s making a difference!

About Seremoni:

For centuries, fish in Japan has been processed using the ike jime method. We’ve adapted this artisan technique and made it more precise and simpler for American fishermen to use. All Seremoni-grade fish are humanely harvested with our proprietary on-boat system within seconds of being live-caught and taken from the water. The fish are then bled and chilled. Resulting in the coveted flavors and unmistakable texture that sushi chefs prize.

The Role:

To plan and execute all maintenance activities to ensure the continuous and efficient operation of all machinery, equipment, and plant utility systems (refrigeration, compressed air, water, electricity). This is a hands-on, autonomous role that combines planning with the direct execution of preventive and corrective maintenance.

What You Will Do:

• Maintenance Planning & Execution: Develop, plan, and execute preventive and corrective maintenance programs for all plant equipment to ensure optimal performance.
• Technical Support & Repairs: Directly perform all maintenance tasks, including mechanical and electrical repairs, to resolve failures and keep production equipment in service.
• Utility Systems Management: Maintain and ensure the proper operation of all plant utility systems, including refrigeration, compressed air, water supply, and electrical systems.
• Spare Parts & Inventory Management: Manage the inventory of critical spare parts and supplies, identifying needs and handling purchase requests to ensure materials are available.
• Interdepartmental Coordination: Coordinate maintenance work with the production department and other peers to minimize disruptions and ensure smooth operation.
• Safety & Compliance: Ensure all maintenance work is performed in compliance with company safety standards, maintaining a safe work environment.

What You Will Need:

• A Technical degree in Electromechanical, Industrial Maintenance, Electrical, or a related field is preferred.
• Over 3 years of hands-on experience performing maintenance in an industrial processing environment, preferably in the seafood industry.
• Proven experience working autonomously and managing multiple priorities.
• Strong knowledge of industrial mechanics and electricity.
• Proficiency in troubleshooting and repairing processing equipment.
• Ability to read and interpret technical diagrams and information.
• Knowledge of refrigeration, compressed air, and other utility systems.
• Collaboration and teamwork with peers.
• Excellent problem-solving skills.
• Proactive, with a strong solution-oriented mindset.
• Ability to work well under pressure.

Compensation and Benefits:

• Competitive salary
• 401k plan
• Health, dental, vision, life, and short term disability insurance
• 80 hours of paid time off, accrued throughout the year
• Sashimi grade fish to take home, so the quality we build can be experienced at the table as well as in the field

Equal Opportunity

Seremoni is an equal opportunity employer. We value diversity in background, experience, and perspective, and are committed to building an inclusive, respectful workplace.

Location:

9700 Commerce Parkway, Lenexa, KS, 66219, United States

Base Pay:

$32.00 / Hour

The Sr. Maintenance Technician is a senior, hands-on technical role responsible for advanced diagnostics, repair, and optimization of production and facility systems. This position serves as the site’s technical authority for complex electrical, HVAC, mechanical, pneumatic, hydraulic, and PLC-assisted equipment issues and plays a key role in equipment reliability, safety compliance, and mentoring of maintenance personnel.

Unrivaled Teamwear serves as the parent company of Champion Teamwear, Gear for Sports, and Knights Apparel, each an industry leader in the sports and team apparel space.

Our family of brands know what goes into great decorated garments, using top-quality fabrics and offering creative decoration options. Each brand offers customers a premier selection and exceptional service for all their sportswear needs, from t-shirts and caps to fleece, performance wear, and outerwear.

• Diagnose and repair complex failures in production and facility equipment using structured root-cause analysis.
• Troubleshoot and repair industrial electrical systems, including control circuits and power distribution systems at 120V, 208V, 220V, 240V, 277V, and 480V.
• Install, troubleshoot, and replace single-phase and three-phase motors, including starters, contactors, overloads, and associated controls.
• Support troubleshooting of PLC-controlled equipment through fault analysis, input/output verification, and interface diagnostics.
• Perform advanced mechanical repairs including bearings, gearboxes, chains, belts, shafts, and alignment.
• Diagnose and repair pneumatic and hydraulic systems including valves, cylinders, regulators, pumps, and pressure systems.

• Troubleshoot and repair HVAC systems including rooftop units, heating, cooling, ventilation, exhaust, and make-up air systems.
• Diagnose airflow, temperature control, and system sequencing issues; coordinate with external vendors when required.
• Support facility utility systems such as compressed air, ventilation, and related infrastructure.

• Perform all work in compliance with Lock-Out/Tag-Out (LOTO) and NFPA 70E arc-flash safety requirements.
• Assist the Maintenance Supervisor with life-safety inspections, electrical safety audits, and NFPA compliance activities.
• Identify reliability risks and recommend corrective actions, PM improvements, and spare parts strategies.

• Act as the technical escalation point during equipment downtime and emergency situations.
• Prioritize and coordinate maintenance response to minimize production impact.
• Provide hands-on technical guidance, mentoring, and training to maintenance team members.
• Support maintenance activities at remote facilities as directed.
• Accurately document work performed using CMMS or work order systems.

• Minimum of five (5) years of industrial maintenance experience in a manufacturing or distribution environment.
• Demonstrated experience with industrial electrical systems, including control voltage and power distribution.
• Proven ability to troubleshoot and install single-phase and three-phase motors.
• Hands-on experience with HVAC troubleshooting and repair.
• Working knowledge of PLC-based equipment troubleshooting.
• Strong background in hydraulics and pneumatics.
• Proficient in MIG welding.
• Knowledge and practical application of LOTO and NFPA 70E arc-flash safety standards.
• Moderate computer skills and experience using maintenance management systems.
• Experience operating forklifts and powered industrial equipment.

EOE/AA: Minorities/Females/Veterans/Disabled

Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

This job description is not designed to cover or contain a comprehensive listing of all activities, duties or responsibilities that are required of the associate. Other duties will be assigned as needed.

We maintain a drug-free workplace and perform pre-employment substance abuse testing as well as participate in E-Verify.

Large International Manufacturing company located in the Rockfish NC area is looking for a Maintenance / Reliability Leader

JOB DUTIES

• Responsible for the development and implementation of a comprehensive Maintenance / Reliability Strategy’s (including functional goals and a financial plan by using the full breadth of maintenance and reliability work processes, best practices, tools, and effective leveraging of resources.
• Serves as the Maintenance Work Process / discipline owner and administrative resource leader.
• The Maintenance / Reliability Leader is responsible for safety, reliability, and cost management.
• Acts as the Maintenance Process owner and is responsible for process execution, improvement, sustainability, and results.
• Ensures Maintenance and Reliability principles are integrated into new projects.
• Responsible for tracking and analyzing Reliability metrics / data (e.g. asset utilization, PM compliance, PPM data, etc.) and updating strategies based on results.

Required:

• 6+ years experience as a maintenance or reliability engineer operating within a manufacturing facility.
• 2+ years of demonstrated leadership experience as a Champion for change.
• Proven track record of project management experience, and leading cross-functional project management groups.
• Detailed knowledge of maintenance work process (planning, scheduling, logistics, etc.)

Why start your new career with flyExclusive:

FlyExclusive is a dynamic and growing company with a strong commitment to safety, service, and excellence. As a member of our team, you will have the opportunity to work with state-of-the-art aircraft and advanced technologies, providing you with valuable experience and career development opportunities. We offer a competitive salary and benefits package, as well as a supportive and collaborative work environment. Join us at flyExclusive and take your career to new heights!

Summary and Objective

A&P Licensed Maintenance Controllers communicate directly with pilots regarding Aircraft Airworthiness and facilitate maintenance support when needed. The Maintenance Control Center (MCC) monitors all aspects of the maintenance process from AOG (Aircraft on Ground) to RTS (return to service).

Essential functions

Reasonable accommodations may be made to enable individuals with disabilities to perform these essential functions.

• Communicates with Operations and advises of aircraft maintenance status changes.
• Coordinates maintenance operation issues on the Cessna Citation series aircraft.
• Ensure accurate and timely information is conveyed using Avianis/CAMP and Corridor systems.
• Evaluate reported aircraft discrepancies and develop an appropriate recovery plan.
• Ensures all aircraft that are down for maintenance are repaired safely, per OEM and Regulatory Instruction and in a timely manner.
• Evaluate reported aircraft discrepancies and develop an appropriate recovery plan.

Skills and Abilities:

• Must be able to work in a fast paced, occasionally stressful environment
• Ability to work weekends/holidays/possibly on call if needed
• Ability to read wiring diagrams and troubleshoot electrical circuits.
• Being a self-starter who is highly motivated with strong initiative
• Interpersonal skills with an emphasis on strong communication skills in both oral and written forms
• Effective time management
• Attention to detail
• Focus on excellence
• Adaptability
• Accountability and having hard conversations

Competencies

• Microsoft Office Suites
• More than proficient in Excel
• CAMP
• Corridor

Work environment

• Typical office and computer lab environment with frequent interruptions.
• Exposure to loud noises including airplane machinery and jet engines.

Physical demands

• Ability to see and hear clearly
• Ability to read, comprehend, and speak English clearly
• Ability to climb, twist, bend, crouch, stoop, kneel, and crawl
• Ability to move in tight quarters
• Ability to sit, stand, and walk for extended periods
• Ability to work in all weather conditions as needed
• Ability to regularly push/pull up to 70 pounds
• Ability to regularly lift/move up to 50 pounds

Required education and experience

• 3-5 years aviation maintenance experience required. (Military or Commercial, Corporate preferred)
• Prior Experience with Maintenance Task Management
• Applicants must hold an FAA (Federal Aviation Administration) Airframe and Powerplant License
• Must be authorized to work lawfully in the United States, must provide two forms of Federal Identification.
• Candidates must successfully complete a comprehensive background check prior to employment. This includes verification of previous employment, education, criminal history, and any other relevant information necessary to determine the suitability for the position.
• This position is classified as a Safety-Sensitive role under Federal Aviation Administration (FAA) regulations and is subject to pre-employment and random drug and alcohol testing in accordance with FAA guidelines

EEO statement

flyExclusive does not discriminate based on race, color, religion, sex (including pregnancy, sex stereotyping, gender identity, gender expression or transgender status), national origin, sexual orientation, physical or mental disability, age, protected genetic information, status as a parent, marital status, political affiliation, or retaliation based on prior protected EEO activity.

Other duties

Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice.

We are the world's #1 gummi candy manufacturer. It's a great time to join our growing organization and help spread "Childlike Happiness" (one of our core values) to consumers across the United States. The Maintenance Mechanic - Packaging will be responsible of performing maintenance, troubleshooting, and repairs on packaging equipment and related infrastructure.Reporting to Manager of Packaging & Technology, the Maintenance Mechanic - Packaging is responsible for assembling, installing, testing, and maintaining packaging equipment, apparatus, and fixtures using hand and power tools. They will collaborate with Electrical and Automation Technicians, as well as other employees, to maintain equipment and optimize processes. Additionally, they will perform preventive and corrective maintenance while driving equipment improvements. The Maintenance Mechanic - Packaging will also partner with support functions to identify and resolve unplanned downtime events, as well as address quality, safety, cost, and other losses in the area using problem-solving techniques and a continuous improvement mindset.

Responsibilities:

• Monitors packaging equipment for proper operation, makes adjustments and repairs to optimize machine performance.
• Inspects equipment and components to identify hazards, defects, and the need for adjustment or repair, and to ensure compliance with codes.
• Observes and diagnoses malfunctioning machines, systems, apparatus, and components, using test equipment and hand tools to locate the cause of a breakdown or operational problem.
• Clean, lubricate, adjust, and repair machinery and equipment.
• Disassembles machinery to inspect defects and replace compromised components. Reassemble machinery according to manufacturer's procedures.
• Ability to repair and fabricate components using shop machine tools and applicable welding techniques.
• Conducts inspection of and routine preventative maintenance on assigned equipment.
• Other duties is assigned.

Qualifications:

• Requires high school diploma or equivalent (HSED/GED). An AAS degree in robotics, industrial maintenance or technology is a plus.
• Minimum of three (3) years of experience relating to industrial mechanical repairs.
• Minimum one (1) year of trades training in industrial maintenance or other technical discipline.
• Must be flexible with off-shift work schedule and overtime/weekends as needed.

Preferred Qualifications:

• Requires good knowledge of the process equipment and strong mechanical aptitude.
• Requires teamwork ability; works well with others and communicates effectively with all associates.
• Requires the ability to train and coach others for success.

Skills:

• Ability to read and understand blueprints, schematic and mechanical drawings.
• Ability to operate a variety of hand and power tools, such as grinders, saws, machine tools, and welding equipment.
• Strong written and verbal communication skills in English to document work, communicate with management, and collaborate with colleagues.
• Requires basic mathematical skills to be able to add, subtract, multiply, divide, and work with percentages.

Physical Requirements:

• Standing/walking: Continuous (over 75%)
• Talking/hearing: Continuous (over 75%)
• Hand/finger dexterity: Frequent to continuous
• Climbing, bending, kneeling, crouching: Frequent
• Lifting/carrying tools, parts, and equipment 50 lbs: Frequent to continuous
• Ability to multitask and function in high-stress environments
• Work performed indoors with artificial lighting, mid-level noise, and proper ventilation

HARIBO of America, Inc. is an Equal Employment Opportunity Employer and maintains a Drug-Free Workplace. Employment at HARIBO of America, Inc. is subject to post offer, pre-employment drug testing. The Company's policy is not to discriminate against any applicant or employee based on race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, including protected veteran status, genetic information or any other basis protected by applicable federal, state, or local laws. HARIBO also prohibits harassment of applicants or employees based on any of these protected categories. It is also HARIBO's policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions.

HARIBO is committed to recruiting, hiring and promoting people with disabilities and veterans. If you need an accommodation to assist with completing the electronic application, please contact the location for which you are applying and ask to speak with the human resources representative or email .

The Broward County Board of County Commissioners is seeking qualified candidates for Construction Project Manager - Highway and Bridge Maintenance Division
Please Note: This announcement will remain open until a sufficient number of applications are received and may close at any time.

About the Division
The Highway and Bridge Maintenance Division (HBMD) is responsible for maintaining and improving Broward County's roadway infrastructure. This includes operating and maintaining three bascule bridges, over 90 fixed bridges, and managing mosquito control operations. HBMD also oversees stormwater drainage improvements, sidewalk repairs, street resurfacing and patching, guardrail maintenance, and right-of-way mowing and cleaning.

Position Summary
We are seeking a skilled and motivated Construction Project Manager to lead the planning, design, and execution of roadway, drainage, and bridge maintenance and repair projects. This role is critical to ensuring the safety, functionality, and longevity of Broward County's transportation infrastructure.

The ideal candidate will have extensive experience managing public works projects from inception through completion, including design, procurement, construction oversight, and documentation. Strong communication skills and proficiency in project management tools and design software are essential.

Key Responsibilities

• Manage infrastructure projects from planning through construction closeout
• Prepare construction plans using GIS, AutoCAD, MicroStation, or OpenRoads Designer (ORD)
• Develop technical specifications and bid documents
• Conduct field reviews and on-site construction inspections
• Compile and maintain project documentation, including contractor invoicing and as-built records
• Monitor project schedules and ensure timely milestone completion
• Track project budgets and financial performance
• Prioritize maintenance and repair needs based on condition assessments and operational priorities
• Provide technical guidance to internal teams and construction crews

Works independently, under limited supervision, reporting major activities through periodic meetings.

• Bachelor's Degree or higher in Civil Engineering, Structural Engineering, Construction Management, Accounting, Business, Economics or closely related field.
• Licensed Professional Engineer in State of Florida
• Florida Engineer Intern License (EIT)
• Storm Water and Erosion Certificate
• Florida Department of Transportation (FDOT) or ACI Concrete Inspection Certificate and/or General Contract License
• Advanced Maintenance of Traffic (MOT) Certificate
• At least four (4) years of experience in construction engineering inspection following Florida Department of Transportation (FDOT) standards
• At least four (4) years of experience using Florida Department of Transportation (FDOT) Design Standards, Plans Preparation Manual, and/or Standard Roadway and Bridge Construction Specifications
• At least four (4) years of intermediate to advanced experience using AutoCAD, MicroStation, Open Road Designer in a roadway and/or bridge maintenance or construction environment
• At least four (4) years of experience in large scale roadway drainage analysis or design
• At least one (1) year of experience with GIS in a roadway and/or bridge maintenance or construction environment

The functions listed below are those that represent the majority of the time spent working in this class. Management may assign additional functions related to the type of work of the job as necessary.

Develops and prepares engineering plans and designs for a variety of construction projects; estimates quantities and costs of such projects.

Assists consultants in the development of construction projects; issues work orders to consultants, surveyors and testing labs; reviews consultants' plans and specifications at various stages of development for conformance to design standards, completeness and accuracy; monitors consultants' cost estimates and verifies consultant's invoices and recommends payment.

Coordinates bid advertisements; schedules and assists in conducting pre-bid conferences; assists in evaluating bids and making recommendations for award of contract.

Schedules and assists in conducting pre-bid construction meetings with consultants, contractors and subcontractors; issues Notice to Proceed to contractors; reviews field inspection reports.

Assists in the preparation of schedules and monitors construction progress; assists in the preparation of change orders; maintains records of consultant's payments.

Assists in the inspection of projects for substantial completion and prepares punch list of any deficiencies; arranges for correction of defects by contractor during warranty period and conducts inspection at end of warranty period to ensure correction of defects.

Prepares required paperwork for capitalizing and closing the project; performs special investigations, sites analyses and feasibility studies as required and submits technical and management reports.

Meets with consultants, contractors, utility organizations, city, state, federal agencies, civic associations, business and community leaders, property owners and attorneys; assists with the preparation of the budget for capital expenditures.

Makes recommendations regarding hiring, discipline and promotions of subordinates; authorizes leave; evaluates employee performance.

Performs related work as assigned.

Physical Demands

Physical demands refer to the requirements for physical exertion and coordination of limb and body movement.

Performs light work that involves walking or standing most of the time and involves exerting up to 20 pounds of force on a regular and recurring basis, or skill, adeptness and speed in the use of fingers, hands or limbs on repetitive operation of electronic office equipment or tools within moderate tolerances or limits of accuracy.

Unavoidable hazards refer to the job conditions that may lead to injury or health hazards even though precautions have been taken.

Involves routine and frequent exposure to traffic; moving machinery.

Competencies

• Financial Acumen

• Manages Complexity

• Decision Quality

• Balances Stakeholders

• Plans and Aligns

• Ensures Accountability

• Drives Results

• Communicates Effectively

• Situational Adaptability

• Collaborates: Building partnerships and working collaboratively with others to meet shared objectives.
• Customer focus: Building strong customer relationships and delivering customer-centric solutions.
• Instills trust: Gaining the confidence and trust of others through honesty, integrity, and authenticity.
• Values differences: Recognizing the value that different perspectives and cultures bring to an organization.