Psc Crane Rigging Jobs in Usa

Immediate Need – Overnight EHS Manager (3-Month Assignment)

Environmental, Health and Safety (EHS) Manager – Data Center Construction

SAVI EHS – Sterling, VA (On-site)

Compensation

$45.00 – $50.00 per hour

40–50 hours per week

$1,000 weekly per diem (for qualified travelers)

Employment Type

Full-Time | W-2 Position

Duration: Approximately 3 months

Shift: Overnight

Position Overview

SAVI EHS has an immediate need for an experienced Environmental, Health and Safety (EHS) Manager to support a hyperscale data center construction project in Sterling, Virginia. This role will primarily support overnight operations, overseeing trade partners and ensuring all work activities remain compliant with OSHA standards, client requirements, and project safety plans. The EHS Manager will work closely with the Construction Manager and project leadership to maintain a safe work environment and promote a proactive safety culture on site.

Key Responsibilities

• Oversee Environmental, Health, and Safety compliance for overnight operations
• Conduct documented daily EHS inspections, audits, and safety observations
• Monitor trade partner activities to ensure adherence to approved safety plans and procedures
• Participate in and review Daily Hazard Analyses (DHAs) and Job Hazard Analyses (JHAs)
• Investigate incidents and near misses, identifying root causes and implementing corrective actions
• Support high-risk operations including cranes, rigging, fall protection, electrical work, and LOTO
• Deliver site-specific safety orientations, toolbox talks, and training as needed
• Track safety metrics and support continuous improvement initiatives
• Collaborate with project leadership to promote an injury-free workplace

Minimum Qualifications

• 5+ years of construction EHS experience (data center experience preferred)
• Strong knowledge of OSHA 1926 Construction Standards
• Experience working with multiple subcontractors and trade partners
• OSHA 30 required; OSHA 510 or OSHA 500 preferred
• Proficiency with Microsoft Office and safety management platforms
• BCSP certifications such as CHST, ASP, or CSP are preferred

Reframe Systems / Construction Supervisor / Sandwich, Mass

Reframe Systems is reinventing how the world builds by uniting modular construction, robotics, and advanced manufacturing to deliver high‑quality housing faster, safer, and more sustainably. As a fast‑growing startup at the intersection of construction and technology, we’re seeking a Construction Supervisor with strong carpentry skills to manage our site work, home delivery, and finishing. This is a great opportunity for a hands-on supervisor who is excited to work with both traditional building methods and our innovative modular construction process.

Requirements of the Construction Supervisor:

· 5+ years of experience in ground-up residential construction.

· Deep knowledge of building means and methods.

· Proficiency in using construction apps like Procore or Buildertrend.

· Active MA Unrestricted CSL.

· Excellent verbal and written communication skills.

· Ability to work effectively in a fast-paced environment with multiple trades working at once.

· Ability to collaborate effectively with our in-house design and factory teams.

· Physically able to lift 50 lbs.

· Valid driver's license and reliable transportation.

Benefits of the Job:

· Annual Salary: $110-140K

· Health Insurance

· Dental Insurance

· Vision

· Life Insurance

· 401K retirement plan

· Pet Insurance

· Paid time off

Responsibilities of the Construction Supervisor:

· The primary point of contact on the jobsite, responsible for all subcontractors from the first shovel to the client move-in.

· Coordinating surveys, excavation, site utilities, foundation, cranes, rigging, carpentry, and final finishes.

· Lead and train carpenters, providing daily work lists and guidance to ensure quality and productivity.

· Maintaining a safe working environment for all personnel and visitors.

· Clear communication with all stakeholders, including clients, inspectors, subcontractors, and neighbors.

· Maintain a detailed daily log with photos and notes to ensure clear communication and a complete project record.

· Partner with the Project Manager to maintain a four-week lookahead schedule for materials, labor, and logistics.

· Maintain quality control on the job site at all times.

· Identify potential project risks and support closeout activities, including punch lists and warranty documentation.

· As the license holder, you will be asked to apply for permits and coordinate, prepare for, and manage all site inspections with municipalities.

· Work closely with product, engineering, and operations to integrate project requirements into modular building systems.

· Provide feedback on design for manufacturability (DFM) and installation processes.

· Thrive in a fast-paced, evolving environment with shifting priorities.

· Contribute to developing new internal processes, playbooks, documentation, and best practices.

· Be willing to roll up your sleeves, jumping into detailed coordination, problem-solving on the floor, and supporting hands-on tasks when needed.

Reframe Systems, founded in 2022 by former Amazon Robotics executives, the company set out to automate homebuilding through robotic microfactories. Based in Andover, Massachusetts, it focuses on producing sustainable, fire‑resilient, and affordable housing. Reframe Systems brings precision to a traditionally uncertain process by owning every stage — design, permitting, fabrication, and delivery. Its tech‑enabled microfactories integrate robotics, digital work instructions, and high‑performance materials to reduce waste, shorten timelines, and ensure consistent, predictable outcomes.

Skillcloud HCM Solutions has been engaged to manage this search. NO PHONE CALLS OR RECRUITERS PLEASE

Reframe Solutions is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, ancestry, familial status, age, physical or mental disability, pregnancy, sexual orientation, gender identity, genetic information, veteran status, or any other characteristic protected by law.

Company Description

De Mase Trucking & Rigging, a family-owned and operated business, with over 50 years of expertise in specialized transportation, heavy hauling, drayage and transloading needs. Serving the United States and Canada, the company offers comprehensive logistics solutions, including project management, routing, and site assessments. With state-of-the-art equipment, in-house pilot cars, De Mase Trucking & Rigging provides services such as plant and machinery relocation, rigging, crane services, warehousing, and import/export solutions. Known for its innovative and professional approach, the company is committed to delivering reliable and efficient transportation services.

Role Description

The in-house broker provides flexible, scalable transportation solutions by leveraging a vetted network of trusted carrier partners. Must operate seamlessly alongside our asset-based operations. Team members are a part of operations by filling in capacity gaps, managing overflow freight, and sourcing carriers with specialized equipment to maintain consistent service and on time deliveries. 

Responsibilities

• Sourcing Carriers:

Must source, thoroughly vet and manage relationships with partner carriers.

• Knowledge of Real Time Market Insight: 

A thorough understanding of current market trends, competitive pricing, lane coverage, and rapid response to changing freight demands to efficiently negotiate rates while maintaining service and margin goals.

• Dispatch and Scheduling:

Coordinate load details from pick up through delivery, ensuring on time performance.

Successfully log and complete loads on all internal systems to ensure loads are captured, completed and billed for.

• Communication:

Monitor shipments, track exceptions, and resolve issues in real time while maintaining clear and consistent communication with clients, drivers, and operations.

• Problem Solving:

Addressing any unforeseen issues or challenges that may arise during transport, such as mechanical breakdowns, carrier falloffs, delays and more.

• Strong Organizational Skills: 

The ability to manage multiple tasks and prioritize effectively is essential. 

• Attention to Detail: 

Accuracy is vital in communicating with our warehouse, partners, clients and other critical tasks. 

• Communication Skills: 

Clear and concise communication is crucial for effective coordination between all departments. 

• Knowledge of DOT, FMCSA, and brokerage compliance standards

Maintain accurate load documentation and brokerage compliance requirements.

• Sales / Brokerage liaison

Analyze market conditions to support sales in pricing and capacity decisions. 

Crane Aerospace and Electronics has an exciting opportunity for a Production Supervisor II at our Lynnwood, WA location.

About Crane:

Crane Aerospace & Electronics supplies critical systems and components to the aerospace and defense markets. You'll find Crane Aerospace & Electronics in some of the toughest environments: from engines to landing gear; from satellites to medical implants and from missiles to unmanned aerial systems (UAS). Located in the epicenter of United States aviation manufacturing, our Crane Aerospace & Electronics Lynnwood, Wash., facility delivers industry-leading aerospace & defense power and fluid solutions. Our products are rugged enough to fly 5 billion miles from Earth on NASA's New Horizons spacecraft and innovative enough to be featured on Eviation's Alice all-electric aircraft. You'll join a group of aerospace professionals committed to engineering excellence and work in a community tucked between the idyllic Puget Sound and Cascade Mountains. Start the next chapter of your career with Crane Aerospace & Electronics!

The Production Supervisor II leads and directs a team of employees in an assigned area of operations such as Metal Fabrication, Assembly, and/or Test. The Production Supervisor II is accountable for maintaining a safe working environment and adhering to quality standards and is responsible for meeting customer demand schedules within established cost goals. Supervision may include the management of employees on more than one shift.

• Identify and use lean manufacturing tools required to drive improvements and mentor teammates in the use of these tools
• Provide inputs (resource planning, overtime projections, productivity improvements) to management to develop monthly and annual budgets
• Assist Value Stream Managers with required monthly reporting to senior level management
• Review and understand daily key performance indicators to evaluate the current status and gap to plan, and use this data to drive daily problem solving (8 Step, 5 Why, Cause and Effect, Fishbone) where required
• Ensure timely identification of quality issues through the use of the non-conforming materials process to ensure scrap and rework are properly processed
• Serve as liaison to other groups, product lines and/or functional areas to ensure products are built, assembled, and/or tested within appropriate parameters
• Review the daily allocation of resources in order to drive production schedule to meet established customer requirements
• Make staffing decisions in accordance with human resource procedures to build and grow the team to meet the needs of the business
• Develop, coach, and mentor employees through the use of performance planning to drive employee and business growth
• Any other task assigned by supervisor or management

• Provide input to and collaborate with Engineering and Quality to define and modify manufacturing instructions
• Use standard supply chain processes and partner with the Supply Chain team to develop material replenishment system for the manufacturing areas
• Ensure equipment complies with calibration and maintenance procedures and requirements

• Experience: 3+ years supervisory experience; 5+ years of experience in the field or in a related area
• Knowledge: Deep understanding of cellular manufacturing practices; Comfortable teaching the use of manufacturing based continuous improvement skills (standard work, 5S, material replenishment, etc.); Intermediate skill level with MS Office software
• Skills/Abilities: Effectively communicate (written and verbal) with all levels of the business and present to groups both small and large; Ability to align customer demand with manufacturing capacity to develop labor planning/allocations; Ability to use data to determine root causes of issues to drive focused corrective action
• Education/Certification: Bachelors Degree

This position may require access to Controlled Data or Information. Where the position requires such access only US Persons will be considered. As a US Department of Defense contractor, we are bound by International Traffic in Arms Regulations (ITAR).

• Standard office environment
• Working conditions are normal for a manufacturing environment
• Manufacturing operations may require the use of safety equipment to include but not limited to: eye safety glasses, gowning, masks, hearing protectors, heel/wrist straps and any other required PPE
• May be exposed to unusual environmental conditions such as loud noises, cold temperatures, confined spaces, dust or fumes
• Requires work with small to medium size hand and power tools
• Occasional travel to customer and outside test lab facilities for technical interchange meetings, design reviews, product testing support, and to attend technical seminars
• May need to travel domestically and internationally (up to 10%)
• Standing: 10% *percentage is approximate and may vary depending on work task
• Sitting: 90% *percentage is approximate and may vary depending on work task
• Lifting (in pounds): up to 20 pounds
• Pushing (in pounds): up to 20 pounds
• Mental/Visual: use of computer, calculator, filing cabinets
• Workspace: cubicle/desk/lab

Salary range: $103,209.60 to $133,785.60. Several factors contribute to actual salary, including experience in a similar role or performing comparable job responsibilities, skills, training, and other qualifications. Some roles may be eligible for participation in performance-based bonus programs.

As a team member at Crane Aerospace and Electronics, you'll enjoy:

• Benefits: Health care, dental or life insurance starting the first day of the month
• Time Off: 15 days of paid time off that start accruing your first day at Crane and 12 paid holidays per year.
• 401k Retirement Plan: 401k plan with company match
• Education Reimbursement: eligible after 90 days of employment

You can see a list of our benefits at or visit our website at for more information on our company and great opportunities.

In our efforts to maintain a safe and drug-free workplace, Crane Aerospace & Electronics requires that candidates complete a satisfactory background check. FAA sensitive positions require employees to participate in a random drug test pool.

This description has been designed to indicate the general nature and level of work being performed by employees within this classification. It is not designed to contain or be interpreted as a comprehensive inventory of all duties, responsibilities, and qualifications required of employees assigned to this job.

Crane Company is an Equal Opportunity Employer and does not discriminate on the basis of race, color, creed, religion, sex, national origin, marital status, age, sexual orientation, gender identity, disability, pregnancy, medical condition, genetic information, protected veteran status or any other characteristic protected under federal, state, or applicable local law.