Protech Knives Jobs in Usa

• The Cook will prepare all food items according to standard recipes and menu to ensure consistency of product to Guests.
• Always conduct oneself in a manner that reflects a positive and professional image.
• The Cook will create order lists for recipe preparations.
• Communicate clearly with other Cooks and Sous Chefs.
• The Cook will train lower level Cooks how to properly use equipment.
• Read recipes and gather all necessary items for recipe execution.
• The Cook will cook, prepare, dish-up and assemble all food for the outlet.
• Adhere to control procedure for food cost and quality.
• The Cook will perform all assigned side work to include replenishing/restocking work station with supplies.
• Check station before, during and after shift for proper set-up and cleanliness.
• The Cook will organize and prioritize work, and meet deadlines.
• Work the line in different locations i.e. Sauté, Broiler, Appetizer, Pantry, Pasta, Grill etc.
• The Cook will prepare hot and cold sauces.
• Perform all duties at a higher level of accuracy and speed than a Assistant Cook
• The Cook will work with small, delicate, and sensitive equipment (knives) requiring fine finger dexterity.
• Operate kitchen equipment including slicer, steamer, deep fryer, ovens, broiler, grill, mixer, braise, kettle, and flat top.
• The Cook will grasp, bend, lift and/or carry, or otherwise, move or push goods weighing a maximum of 150 lbs.
• Perform tasks requiring bending, stooping, kneeling, standing, and walking significant distances.
  
  

• One (1) year minimum experience in food preparation and food knowledge
• Must be able to perform all cooking duties
• Knowledge of how to prepare sauces.
• Requires reading and math skill for recipes and measurements
• Possess knowledge of two stations with some familiarization of two others
• Must have basic knife skills
• Knowledge of the MSDS program
• Must be able to complete any classes or certifications required by the state of Missouri or Ameristar Casinos, Inc.
• No schooling is required but culinary education is encouraged
• Must be at least 18
  
  

Company Description

SZCO Supplies Inc, founded in 1984, offers a diverse range of high-quality knives, edged tools, and sporting goods. With a mission to provide knife enthusiasts with aesthetically distinctive tools, we focus on modern design, quality, and value. Our extensive product portfolio includes over 2,600 active SKUs across 100+ segments, designed exclusively by us or for us.

The office is a fast-paced office environment, seeking a highly organized and detail-oriented Office Assistant to join our team. If you thrive in a bustling workplace, possess excellent time management, and enjoy supporting teams with precision and efficiency, we encourage you to apply. This is a full time, in-person position.

Key Responsibilities:

• Provide administrative support to various departments, ensuring smooth day-to-day operations.
• Manage and maintain office calendars, scheduling follow ups and meetings with efficiency.
• Handle incoming calls, emails, and correspondence, directing them to the appropriate contacts.
• Organize and maintain filing systems, both physical and digital, ensuring accuracy and accessibility.
• Assist with order management and customer support.
• Support event planning and execution for office meetings, training sessions, and team events.
• Handle confidential information with discretion.
• Liaise with customers, vendors, clients, and external stakeholders as needed.
• Perform other general office tasks and special projects as required.
• Respond to customer and service inquires as needed to completion

Qualifications:

• Bachelor’s Degree required.
• Exceptional organizational and time management skills, with a keen attention to detail.
• Ability to multitask and prioritize in a fast-paced environment.
• Strong verbal and written communication skills.
• Proficient in Microsoft Office Suite (Word, Excel, Outlook, PowerPoint) and office technology.
• Ability to work independently and collaboratively as part of a team.
• Problem-solving mindset with a proactive approach to work.
• Experience in an office or administrative role preferred.

Benefits:

• Competitive salary and benefits package.
• A warm and supportive work environment.

How to Apply: Please submit your resume and cover letter to

• We look forward to hearing from you!

• Provides superior customer service, positively effects interactions with customers and employees, and has the resiliency to deal with difficult customers in all types of business conditions and the ability to work harmoniously with coworkers.
• Prepares foods that are to be grilled, fried, broiled, baked, boiled, braised, poached or prepared in the pantry; ensures that all plates or pans served are aesthetically appealing and cooked to the specifications of the customer and the chef.
• Recognizes a variety of sauces and properly places them on all entrees featured on daily menus.
• Keeps work station neat and clean.
• Assists coworkers to ensure efficient operation of the kitchen.
• Ensures cleanliness of working area; reports all equipment for safety failures, hazardous areas and accidents.
• Ensures the proper storing of any foods, including those from a previous function.
• Ensures that items are fully stocked and equipment is in good working condition.
• ensures the proper closing down of work stations.
  
  

• This position operates in a working environment that is subject to varying levels of heat and noise.
• At times subjected to hazards such as wet floors and dangers associated with the use of heavy duty cutlery, knives and choppers.
• Ability to use all equipment associated with the position, including, but not limited to, choppers, slicers, mixers and grinders.
• Basic food preparation knowledge and line work experience preferred.
• Must be flexible to work varying shifts and time schedules as needed.
• Must be able to obtain and maintain all licenses / certifications per Federal, State, and Gaming regulations.
• Must be at least 16 years of age.
  
  

Company Description

SZCO Supplies Inc, founded in 1984, offers a diverse range of high-quality knives, edged tools, and sporting goods. With a mission to provide knife enthusiasts with aesthetically distinctive tools, we focus on modern design, quality, and value. Our extensive product portfolio includes over 2,600 active SKUs across 100+ segments, designed exclusively by us or for us.

The office is a fast-paced office environment, seeking a highly organized and detail-oriented Operations Assistant to join our team. If you thrive in a bustling workplace, possess excellent time management, and enjoy supporting teams with precision and efficiency, we encourage you to apply. This is a full time, in-person position.

Key Responsibilities:

• Provide administrative support to various departments, ensuring smooth day-to-day operations.
• Manage and maintain office calendars, scheduling follow ups and meetings with efficiency.
• Handle incoming calls, emails, and correspondence, directing them to the appropriate contacts.
• Organize and maintain filing systems, both physical and digital, ensuring accuracy and accessibility.
• Assist with order management and customer support.
• Support event planning and execution for office meetings, training sessions, and team events.
• Handle confidential information with discretion.
• Liaise with customers, vendors, clients, and external stakeholders as needed.
• Perform other general office tasks and special projects as required.
• Respond to customer and service inquires as needed to completion

Qualifications:

• Bachelor’s Degree required.
• Exceptional organizational and time management skills, with a keen attention to detail.
• Ability to multitask and prioritize in a fast-paced environment.
• Strong verbal and written communication skills.
• Proficient in Microsoft Office Suite (Word, Excel, Outlook, PowerPoint) and office technology.
• Ability to work independently and collaboratively as part of a team.
• Problem-solving mindset with a proactive approach to work.
• Experience in an office or administrative role preferred.

Benefits:

• Competitive salary and benefits package.
• A warm and supportive work environment.

How to Apply: Please submit your resume and cover letter to

• We look forward to hearing from you!

• 
  
• Masks or unmasks various products and parts for painting or selective plating. Interprets blueprints, work instructions, both written and verbal instructions, to determine the most effective procedures for masking various products.
  
• Uses masking tape, paint, various types of wax and protective devices to selectively mask off certain sections of parts and/or units that are to be painted or plated.
  
• Uses various hand tools such as punches, scissors, brushes, knives or razor blades to cut and remove tape.
  
• Position protective coatings on parts or units in accordance with instructions. Removes tape, wax, paint and other protective coatings after selective painting or plating process has been completed. Touches up paint damaged parts using a brush.
  
• Adheres to all processing specifications necessary to achieve blueprint requirements and quality of the hardware.
  
• Demonstrates excellent safety practices and habits to ensure all rules are obeyed and implemented.
  
• Keeps work area clean. Performs other related duties as required.
  
• This job requires access to US export-controlled information.
  
• Must be computer-literate
  

At American Packaging Corporation (APC), you'll find the packaging career you've been looking for. With competitive salaries, excellent benefits, 401(k) plans and tuition reimbursement programs, we nurture our employees while advancing and promoting diversity and inclusion. As the leading flexible packaging converter in North America for over a century, APC's longstanding success is fueled from the inside out. We're constantly seeking to improve our internal operations and were named a "Best of the Best" in the Best workplaces in the America's awards for 12 years in a row. It's how and why we engage the best and brightest talent to continue propelling our shared success into the future.

LOCATION: Rochester, NY

SUMMARY: An Extrusion Utility Operator is responsible for safely and effectively contributing to team a of 4-5 individuals supporting the operation of extrusion lamination manufacturing equipment. Maintaining a strong work ethic while demonstrating good communication skills are important to exceeding customer expectations, productivity standards, and personal career growth. Extrusion Utility Operators are expected to be able to independently prioritize their time and duties to contribute to the team running efficiently.

ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned.

• Performs duties in a manner that adheres to safety policies and procedures.
• Participate in the training curriculum, learning new aspects of extrusion line operations while completing assigned duties required for operation.
• Maintain quality standards by reviewing product specifications and ensuring thorough completion of assigned production paperwork.
• Operate as a member of a larger team responsible for aspect of overall process. Team members will rely on attention to detail and proper communication to ensure entirety of process is safe and efficient.
• Exercise cautious approach to heavy equipment including use over overhead hoists.
• Completes tasks to ensure area around the machine is clean to GMP & Food Safety standards
• Visual acuity for identifying minor imperfections and material defects.
• Basic understanding of general tool usage including tape measurers, utility knives and screw drivers.
• Good communication skills, both verbal and written with working knowledge of Microsoft Office.

QUALIFICATION REQUIREMENTS:

To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

EDUCATION and/or EXPERIENCE

High school diploma or general education degree (GED); and one to three years related manufacturing experience and/or training; or equivalent combination of education and experience.

LANGUAGE SKILLS

Ability to read and comprehend simple instructions and short correspondences. Ability to write simple correspondence. Ability to effectively present information in one-on-one and small group situations to peers and supervisors within the organization. Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals.

MATHEMATICAL SKILLS

Ability to read/use a tape measurer and apply concepts of basic algebra.

REASONING ABILITY

Ability to apply common sense understanding to carry out detailed but uninvolved written or oral instructions. Ability to reach out for assistance and communicate if instructions or assignments are not clear. Ability to retain information and apply to future situations of similar manner.

PHYSICAL DEMANDS

The physical demands described here are representatives of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to use hands to finger, handle, or feel and talk or hear. The employee frequently is required to sit and reach with hands and arms. The employee is occasionally required to stand; walk; climb or balance; and stoop, kneel, crouch, or crawl. This position may require manual lifting not to exceed 50 lbs - reference your department-specific JHA (job hazard analysis) for departmental lifting restrictions.

WORK ENVIRONMENT

The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

American Packaging Corporation is committed to equal opportunity for all, without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic. American Packaging Corporation will make reasonable accommodations for known physical or mental limitations of otherwise qualified employees and applicants with disabilities unless the accommodation would impose an undue hardship on the operation of our business. EOE/AA Disability/Veteran.

If you are interested in applying for an employment opportunity and need special assistance or an accommodation to apply for a posted position, please contact our Human Resources department at:

.

At American Packaging Corporation (APC), you'll find the packaging career you've been looking for. With competitive salaries, excellent benefits, 401(k) plans and tuition reimbursement programs, we nurture our employees while advancing and promoting diversity and inclusion. As the leading flexible packaging converter in North America for over a century, APC's longstanding success is fueled from the inside out. We're constantly seeking to improve our internal operations and were named a "Best of the Best" in the Best workplaces in the America's awards for 12 years in a row. It's how and why we engage the best and brightest talent to continue propelling our shared success into the future.

LOCATION: Chili, NY

Hours: DAYS 7am-7pm on a 2-2-3 schedule

SUMMARY: Slits printed rolls from the press or Extruder to individual rolls as per customer specifications. Material being slit is inspected for quality/defects and finished rolls are palletized for shipment to the customer.

ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned.

• Facilitate on the job training and instruction for team members on the correct use of tools and equipment to ensure proper safety and operating procedures are followed.
• Reads job specifications to determine machine adjustments and material requirements.
• Sets up machine.
• Uses lowboy to mount full rolls onto machine.
• Observes machine operation to detect material defects or machine malfunction.
• Measures material dimensions to determine accuracy of machine operation.
• Performs minor machine maintenance such as oiling/greasing machines and changing female knives.
• Prepares required paperwork, including daily production reports, SPC charting, roll tickets and inventory tags.
• Completes work orders when necessary.
• Actively participates in safety programs and makes safety observations. Follows plant safety rules.
• Other duties as assigned.

QUALIFICATION REQUIREMENTS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

EDUCATION and/or EXPERIENCE: High school diploma or general education degree (GED); and one to three months related experience and/or training; or equivalent combination of education and experience.

LANGUAGE SKILLS

Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. Ability to speak effectively before groups of customers or employees of organization.

MATHEMATICAL SKILLS

Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, interpret bar graphs.

REASONING ABILITY

Ability to apply common sense understanding to carry out detailed but uninvolved written or oral instructions. Ability to deal with problems involving a few concrete variables in standardized situations.

PHYSICAL DEMANDS

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand and use hands to finger, handle, or feel. The employee frequently is required to reach with hands and arms and talk or hear. The employee is occasionally required to walk and stoop, kneel, crouch, or crawl. This position may require manual lifting not to exceed 50 lbs - reference your department-specific JHA (job hazard analysis) for departmental lifting restrictions. Specific vision abilities required by this job include close vision, color vision, and ability to adjust focus.

WORK ENVIRONMENT

The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is occasionally exposed to humid conditions, airborne particles, and vibration. The noise level in the work environment is usually moderate.

American Packaging Corporation is committed to equal opportunity for all, without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic. American Packaging Corporation will make reasonable accommodations for known physical or mental limitations of otherwise qualified employees and applicants with disabilities unless the accommodation would impose an undue hardship on the operation of our business. EOE/AA Disability/Veteran.

If you are interested in applying for an employment opportunity and need special assistance or an accommodation to apply for a posted position, please contact our Human Resources department at:

.

Do you love to cook? Are you passionate about food? As a Cook on our team, you?ll help bring recipes to life while being able to flex your creativity! Surrounded by fresh ingredients and the best equipment, you?ll be immersed in a world that goes beyond food preparation ? experimenting with different cuisines, flavors, and cooking styles. At Aramark, we care about your health, so we have production guidelines and safety procedures in place to help you do what you love. Get ready to reach new heights, ignite your passion, and pursue what matters by cooking with us!

COMPENSATION: The Hourly rate for this position is $19.00 to $21.00. If both numbers are the same, that is the amount that Aramark expects to offer. This is Aramark?s good faith and reasonable estimate of the compensation for this position as of the time of posting.

BENEFITS: Aramark offers comprehensive benefit programs and services for eligible employees including medical, dental, vision, and work/life resources. Additional benefits may include retirement savings plans like 401(k) and paid days off such as parental leave and disability coverage. Benefits vary by location and are subject to any legal requirements or limitations, employee eligibility status, and where the employee lives and/or works. For more information about Aramark benefits, click here Aramark Careers - Benefits & Compensation

There is no predetermined application window for this position, the position will close once a qualified candidate is selected. Qualified applicants with arrest or conviction records will be considered for employment in accordance with all applicable laws, including, but not limited to all applicable Fair Chance Ordinances and Acts. For jobs in San Francisco, this includes the San Francisco Fair Chance Ordinance.

• Essential functions and responsibilities of the position may vary by Aramark location based on client requirements and business needs.
• Cooks and prepare a variety of food according to production guidelines and standardized recipes
• Sets up workstation with all needed ingredients and equipment
• Prepares ingredients by measuring, weighing, mixing, chopping, trimming, and peeling food items
• Safely uses a variety of utensils including knives
• Operates equipment such as ovens, stoves, slicers, mixers, etc.
• Bakes, roasts, broils, steams, and uses a variety of cooking methods on meat, vegetables, and other foods
• Arranges, garnishes, and portions food according to established guidelines
• Properly stores food by adhering to food safety policies and procedures
• Cleans and sanitizes work areas, equipment, and utensils
• Maintains excellent customer service and positive demeanor towards guests, customers, clients, co-workers, etc.
• Adheres to Aramark safety policies and procedures including accurate food safety and sanitation
• Ensures security of company assets
  

At Aramark, developing new skills and doing what it takes to get the job done make a positive impact for our employees and for our customers. In order to meet our commitments, job duties may change or new ones may be assigned without formal notice.

• Experience as a cook or in a related role required
• Validated knowledge of the basic principles of food preparation, various cooking methods, and food safety regulations such as accurate food handling, sanitation, and storage
• Must be able to acquire food safety certification
• Demonstrate basic math and counting skills
• Demonstrates interpersonal communication skills, both written and verbal
  

This role may have physical demands including, but not limited to, lifting, bending, pushing, pulling and/or extended walking and standing. This role may also require uniforms and/or usage of Personal Protective Equipment (PPE).

Our Mission

Rooted in service and united by our purpose, we strive to do great things for each other, our partners, our communities, and our planet.

At Aramark, we believe that every employee should enjoy equal employment opportunity and be free to participate in all aspects of the company. We do not discriminate on the basis of race, color, religion, national origin, age, sex, gender, pregnancy, disability, sexual orientation, gender identity, genetic information, military status, protected veteran status or other characteristics protected by applicable law.

About Aramark

The people of Aramark proudly serve millions of guests every day through food and facilities in 15 countries around the world. Rooted in service and united by our purpose, we strive to do great things for each other, our partners, our communities, and our planet. We believe a career should develop your talents, fuel your passions, and empower your professional growth. So, no matter what you're pursuing - a new challenge, a sense of belonging, or just a great place to work - our focus is helping you reach your full potential. Learn more about working here at or connect with us on Facebook, Instagram and Twitter.

• Regular attendance at assigned location; may include the A/Z fabrication facility or other project sites;
• Works on systems that include Heating Hot Water, Chilled Water, Steam, Condensate, Compressed Air, Process Fluids, Chemical, Fuel Oil, Gasses, and other related systems;
• Works with materials that include carbon steel, stainless steel, plastics, fiberglass, copper, (brazed, soft soldered and pro-press);
• Clamp, hold, tack-weld, heat-bend, grind or bolt component parts to obtain required configurations and positions for welding.
• Remove rough spots from work pieces, using portable grinders, hand files, or scrapers.
• Chip or grind off excess weld, slag, or spatter, using hand scrapers or power chippers, portable grinders, or arc-cutting equipment.
• Weld pipe and components in flat, vertical, or overhead positions using open root butt weld, socket weld and/or fillet weld.
• Operate manual or semi-automatic welding equipment to fuse metal segments, using processes such as gas tungsten arc, gas metal arc, flux-cored arc, plasma arc, shielded metal arc, resistance welding, and submerged arc welding.
• Recognize, set up, and operate hand and power tools common to the welding trade, such as shielded metal arc and gas metal arc welding equipment.
• Ignite torches or start power supplies and strike arcs by touching electrodes to metals being welded, completing electrical circuits.
• Examine work pieces for defects and measures work pieces with straightedges or templates to ensure conformance with specifications.
• Prepare all material surfaces to be welded, ensuring that there is no loose or thick scale, slag, rust, moisture, grease, or other foreignmatter.
• Monitor the fitting, burning, and welding processes to avoid overheating of parts or warping, shrinking, distortion, or expansion of material.
• Select and install torches, torch tips, filler rods, and flux, according to welding chart specifications or types and thicknesses of metals.
• Fill holes, and increase the size of metal parts.
• Detect faulty operation of equipment or defective materials and notify supervisors.
• Determine required equipment and welding methods, applying knowledge of metallurgy, geometry, and welding techniques.
• Connect and turn regulator valves to activate and adjust gas flow and pressure so that desired flames are obtained.
• Lay out, position, align, and secure parts and assemblies prior to assembly, using straightedges, combination squares, calipers, and rulers.
• Repair products by dismantling, straightening, reshaping, and reassembling parts, using cutting torches, straightening presses, and hand tools.
• Clean or degrease parts, using wire brushes, portable grinders, or chemical baths.
• Mark or tag material with proper job number, piece marks, and other identifying marks as required.
• Position and secure work pieces, using hoists, cranes, wire, and banding machines or hand tools.
• Analyze engineering drawings, blueprints, specifications, sketches, work orders, and material safety data sheets to plan layout, assembly, and welding operations.
• Dismantle metal assemblies or cut scrap metal, using thermal-cutting equipment such as flame-cutting torches or plasma-arc equipment.
• Preheat work pieces prior to welding or bending, using torches or heating furnaces.
• Hammer out bulges or bends in metal work pieces.
• Develop templates and models for welding projects, using mathematical calculations based on blueprint information.
• Check grooves, angles, or gap allowances, using micrometers, calipers, and precision measuring instruments.
• Cut, contour, and bevel metal plates and structural shapes to dimensions as specified by blueprints, layouts, work orders, and templates, using powered saws, hand shears, or chipping knives.
• Estimate consumable materials needed for production and manufacturing and maintain required stocks of materials.
• Set up and use ladders and scaffolding as necessary to complete work.
• Use fire suppression methods in industrial emergencies.
• Detect faulty operation of equipment or defective materials and notify supervisors;
• Direct helpers or apprentices in appropriate tasks;
• Must maintain strict adherence to safety rules and quality;
• Participate in site housekeeping;
• Interact with co-workers in an attentive courteous manner;
• Additional duties as directed by management.
  

• Ability to work independently or as part of a team;
• Experience: 5 years of Field Experience, trade school or apprenticeship;
• Knowledge of materials, methods and tools involved in industrial construction;
• Attention to detail;
• Ability to keep hand and arm steady;
• Be highly focused on customer satisfaction expectations;
• Good documentation and record keeping;
• Preparation of miscellaneous paperwork including time sheets, daily reports and material requests;
• Competency in Permit Required Confined Space;
• Understanding of and strict adherence to daily Job Hazard Analysis (JHA);
• Appropriate state certification or license;
• OSHA 10 certification.
  

• Industrial manufacturing facilities Power generating facilities
• Chemical manufacturing Healthcare & Institutional
• Pharmaceutical facilities including GMP - Aseptic and non-Aseptic Areas and Non GMP Areas Commercial and offices spaces
  

• Regular attendance at assigned location; may include the A/Z fabrication facility or other project sites;
• Works on systems that include Heating Hot Water, Chilled Water, Steam, Condensate, Compressed Air, Process Fluids, Chemical, Fuel Oil, Gasses, and other related systems;
• Works with materials that include carbon steel, stainless steel, plastics, fiberglass, copper, (brazed, soft soldered and pro-press);
• Clamp, hold, tack-weld, heat-bend, grind or bolt component parts to obtain required configurations and positions for welding.
• Remove rough spots from work pieces, using portable grinders, hand files, or scrapers.
• Chip or grind off excess weld, slag, or spatter, using hand scrapers or power chippers, portable grinders, or arc-cutting equipment.
• Weld pipe and components in flat, vertical, or overhead positions using open root butt weld, socket weld and/or fillet weld.
• Operate manual or semi-automatic welding equipment to fuse metal segments, using processes such as gas tungsten arc, gas metal arc, flux-cored arc, plasma arc, shielded metal arc, resistance welding, and submerged arc welding.
• Recognize, set up, and operate hand and power tools common to the welding trade, such as shielded metal arc and gas metal arc welding equipment.
• Ignite torches or start power supplies and strike arcs by touching electrodes to metals being welded, completing electrical circuits.
• Examine work pieces for defects and measures work pieces with straightedges or templates to ensure conformance with specifications.
• Prepare all material surfaces to be welded, ensuring that there is no loose or thick scale, slag, rust, moisture, grease, or other foreignmatter.
• Monitor the fitting, burning, and welding processes to avoid overheating of parts or warping, shrinking, distortion, or expansion of material.
• Select and install torches, torch tips, filler rods, and flux, according to welding chart specifications or types and thicknesses of metals.
• Fill holes, and increase the size of metal parts.
• Detect faulty operation of equipment or defective materials and notify supervisors.
• Determine required equipment and welding methods, applying knowledge of metallurgy, geometry, and welding techniques.
• Connect and turn regulator valves to activate and adjust gas flow and pressure so that desired flames are obtained.
• Lay out, position, align, and secure parts and assemblies prior to assembly, using straightedges, combination squares, calipers, and rulers.
• Repair products by dismantling, straightening, reshaping, and reassembling parts, using cutting torches, straightening presses, and hand tools.
• Clean or degrease parts, using wire brushes, portable grinders, or chemical baths.
• Mark or tag material with proper job number, piece marks, and other identifying marks as required.
• Position and secure work pieces, using hoists, cranes, wire, and banding machines or hand tools.
• Analyze engineering drawings, blueprints, specifications, sketches, work orders, and material safety data sheets to plan layout, assembly, and welding operations.
• Dismantle metal assemblies or cut scrap metal, using thermal-cutting equipment such as flame-cutting torches or plasma-arc equipment.
• Preheat work pieces prior to welding or bending, using torches or heating furnaces.
• Hammer out bulges or bends in metal work pieces.
• Develop templates and models for welding projects, using mathematical calculations based on blueprint information.
• Check grooves, angles, or gap allowances, using micrometers, calipers, and precision measuring instruments.
• Cut, contour, and bevel metal plates and structural shapes to dimensions as specified by blueprints, layouts, work orders, and templates, using powered saws, hand shears, or chipping knives.
• Estimate consumable materials needed for production and manufacturing and maintain required stocks of materials.
• Set up and use ladders and scaffolding as necessary to complete work.
• Use fire suppression methods in industrial emergencies.
• Detect faulty operation of equipment or defective materials and notify supervisors;
• Direct helpers or apprentices in appropriate tasks;
• Must maintain strict adherence to safety rules and quality;
• Participate in site housekeeping;
• Interact with co-workers in an attentive courteous manner;
• Additional duties as directed by management.
  

• Ability to work independently or as part of a team;
• Experience: 5 years of Field Experience, trade school or apprenticeship;
• Knowledge of materials, methods and tools involved in industrial construction;
• Attention to detail;
• Ability to keep hand and arm steady;
• Be highly focused on customer satisfaction expectations;
• Good documentation and record keeping;
• Preparation of miscellaneous paperwork including time sheets, daily reports and material requests;
• Competency in Permit Required Confined Space;
• Understanding of and strict adherence to daily Job Hazard Analysis (JHA);
• Appropriate state certification or license;
• OSHA 10 certification.
  

• Industrial manufacturing facilities Power generating facilities
• Chemical manufacturing Healthcare & Institutional
• Pharmaceutical facilities including GMP - Aseptic and non-Aseptic Areas and Non GMP Areas Commercial and offices spaces