Programmers Io Careers Jobs in Usa

List what the person must do to perform the job to meet standards.

Draw parts in Bob Cad format as assigned

Program wire EDM & Cincinnati mill

Investigate and order tools approved by your supervisor

Once a job is designed any changes should be approved by the supervisor

Rebuild and rework all tooling as needed

Build or assist in building of new tooling when needed

Keep all machines clean & maintained and report possible problems

Keep all tools, fixtures, benches & floors clean and free of oil

Works from prints, specifications, charts, formulae, drawings, sketches, written and verbal

Order, instructions, and request

Uses precision measuring instruments, including but not limited to, micrometers, vernier

calipers, depth and various other gauges, indicators, rule, square, surface plate, and also a

variety of hand tools

Sets up and operates a normal range of machinery and equipment such as but not limited to:

single and multi-spindled drill presses, surface and wet grinders, saw, lathes, milling machines

and other similar type machines

Selects, adjusts, changes, replaces and sharpens tools, cutters, holders, jigs, fixtures, etc

Adjusts speeds, feeds, travel of parts; set and adjust stops, limits, guides, etc

Fabricates various die parts, sections, inserts, punches, etc

Makes necessary tool and die tryouts

Disassembles as required, grind using special fixtures and holding devices, reassemble;

replaces punches, stripper springs, stops, inserts, etc

Maintains inventory of most commonly used parts, tools, materials, and items

Informs supervisor of low inventories. Maintain all maintenance records for dies

Reviews returned dies and items leaving tool room

Compares to prints, specifications, and work requests

Assures compliance to work standards, specifications, and prints

Performs machine maintenance to troubleshoot, diagnose, and repair various mechanical

problems

Detects and reports defective and unsafe equipment and material as well as unusual situations

to supervisor

Observes and obeys all safety rules, practices, and procedures. Wear and employ personal

protective equipment as required

Maintains work area in a neat and orderly manner

Performs other similar or related duties as required or requested

Regular attendance is always an essential function

The Tool and Die Maker must possess the minimum knowledge, skills, and abilities listed below:

• 
  
• High School or Trade School Graduate; Prefer Tool and Die Maker experience with Certification
  
• Ability to read and write
  
• Read and follow work orders
  
• Ability to read a measuring tape
  
• Ability to follow instructions
  
• Ability to inspect material
  
• Ability to occasionally lift 75 to 100 pounds
  
• Ability to do repetitive bending, reaching, stretching, lifting and twisting
  

REQ OVERVIEW:

In this role, you will be supporting integration and commissioning efforts for a high-volume automotive manufacturer in northern Indiana. This role requires strong hands-on experience with Fanuc robotics, body applications, and special means build. The successful candidate will play a critical role in programming, touch-ups, commissioning support, and quality collaboration during pre-commissioning and launch phases. You will be responsible for the following:

- Develop, modify, and optimize Fanuc robot programs for body shop applications

- Perform robot teaching, touch-ups, and recovery in active production and pre-commissioning environments

- Configure robot frames, tools, payloads, and TCPs to meet process and quality requirements

- Support rapid program adjustments during special means build

- Support robot cell star-up, offline system work, and commissioning activities

- Troubleshoot robot alarms, motion issues, and sequence ladder logic under tight timelines

- Provide on-floor support during peak programming and commissioning periods

- Collaborate closely with Quality teams to resolve process issues

- Perform touch-ups and refinements to improve weld quality, part accuracy, and repeatability

- Support containment actions and fast-turn engineering changes during builds

- Coordinate with controls teams to validate I/O, interlocks, and basic handshaking

- Follow all safety procedures during programming and floor support

- Work safely in active manufacturing and commissioning environments

Job Title: Statistical Programming Analyst

Location: Columbia, SC

Contract duration: 6 Month contract with potential for extension or conversion

Job Summary

We are seeking a Statistical Programming Analyst III to join our Research & Analysis team in a partially onsite role, responsible for developing and delivering data-driven reports using large healthcare datasets. This role focuses on ensuring data integrity, executing routine monthly reporting processes, and creating ad hoc analyses to meet customer needs through statistical programming and data interpretation using tools such as SAS, SQL, and/or Python, with a transition toward Python and expanded data visualization capabilities.

Key Job Responsibilities:

• Ensure data integrity by validating and supporting monthly data warehouse table loads
• Execute standard and routine reporting processes using updated datasets
• Develop and deliver recurring and ad hoc reports based on customer requirements
• Use statistical programming (SAS, SQL, and/or Python) to extract, manipulate, and analyze large healthcare datasets
• Perform mathematical computations and data interpretation to generate meaningful insights
• Collaborate with internal teams, external vendors, and CMS stakeholders to understand reporting needs
• Translate technical findings into clear, concise reports and documentation for both technical and non-technical audiences
• Create and maintain detailed documentation for reporting processes and outputs
• Support the transition of existing processes to Python and contribute to enhancements in data visualization, dashboarding, and modeling
• Adapt to evolving tools, systems, and requirements within a dynamic contract environment

Job Qualifications:

• Bachelor’s or Master’s degree in Statistics, Biostatistics, Mathematics, Computer Science, or a related field
• Minimum of 4 years of experience in statistical programming or statistical data interpretation
• Strong experience with statistical programming and reporting (SAS, SQL, and/or Python preferred)
• Proficiency with Microsoft Office applications
• Experience working with relational databases and large datasets
• Ability to perform mathematical computations and analyze complex data
• Strong written and verbal communication skills, including the ability to explain technical concepts to non-technical audiences
• Experience creating clear, detailed documentation for reports and processes
• Ability to work with multiple stakeholders, including external vendors and CMS
• Adaptability to changing tools, technologies, and processes (including transition to Python and new visualization tools)
• Self-motivated, able to work independently, and comfortable solving complex problems with limited direction
• Must meet CMS security clearance and U.S. residency requirements (3 of the last 5 years in the U.S.)

Screening questions:

Do you now or in the future require sponsorship (e.g. H-1B)? Y/N

EEO and ADA Statement:

Consulting Solutions and its family of companies is an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity or expression, pregnancy, age, national origin, disability status, genetic information, protected veteran status, or any other characteristic protected by law.

If you are a person with a disability needing assistance with the application or at any point in the hiring process, please contact us at:

Instructions

Must have Epicor experience from version 9 or 10 through Kinetic

Local candidates only (onsite role)

Job Description

Key Responsibilities:

Develop and customize Epicor ERP solutions using C#, BPMs, BAQs, Dashboards, and REST APIs.

Support Epicor implementations, upgrades, and integrations across V9, V10, and Kinetic.

Troubleshoot, debug, and optimize Epicor customizations and reports.

Collaborate with functional teams to translate business requirements into technical solutions.

Required Qualifications:

Proven experience programming in Epicor ERP (V9, V10, and/or Kinetic).

Strong knowledge of C#, SQL, BPMs, BAQs, and UI customizations.

Experience with Epicor Kinetic framework and modern UI preferred.

Strong problem-solving and communication skills.

Title: SDET Consultant

Location: Dallas, TX or Seattle, WA

Hybrid 4 days a week

In person interview at Dallas and Seattle

7+ years as an SDET/QE with recent focus on Android or mobile application automation testing

• Strong hands-on experience with mobile automation frameworks and tools such as Sauce Labs, LambdaTest, or mobile‐ready Selenium/Appium.

• Proven expertise in API and backend testing (SOAP/REST, XML/JSON), including test design, execution, and defect analysis.

• Solid SQL skills for data validation and troubleshooting across complex, integrated systems.

• Experience working in CI/CD environments using Jenkins, Git/Maven/Gradle, and related build/deployment tooling.

• Familiarity with debugging and monitoring tools such as Splunk, SOAPUI, Fiddler, or similar for end‐to‐end issue investigation.

• Strong communication skills and experience collaborating closely with Android developers, product owners, and other cross‐functional stakeholders in an Agile environment.

The ideal candidate will be responsible for developing high-quality applications. They will also be responsible for designing and implementing testable and scalable code.

IBM i (AS/400) RPGLE Developer

IBM i Application Development

• Design, develop, and maintain IBM i applications using RPGLE / Free RPG, SQLRPGLE, embedded SQL, CLLE, and DDS (DSPF/PRTF).
• Translate business requirements into technical solutions, including program changes, database updates, and test plans.
• Build reliable batch and interactive processes, including validations, exception handling, and operational logging.
• Participate in code reviews and follow established coding standards and documentation practices.

Supply Chain & Distribution Support

• Support and enhance workflows related to orders, purchasing/receiving, inventory, pricing, allocations, invoicing, shipping, and warehouse/logistics operations.
• Work directly with operations and business users to troubleshoot issues, reduce manual effort, and improve system accuracy and efficiency.
• Assist with root-cause analysis and implement corrective/preventive fixes for recurring issues.

B2B Integrations & Interfaces (Non-Web)

• Develop and support interfaces using SFTP/FTPS, flat files (CSV/TXT), EDI-related workflows, MQ, and JSON processing as needed.
• Implement interface controls: data validation, audit trails, error reporting, reconciliation, and retry/reprocess procedures.

Required Qualifications

• Experience (professional or strong project work) with RPGLE / Free RPG and Db2 for i SQL / embedded SQL.
• Understanding of IBM i fundamentals (libraries/objects, job structure, spool files, IFS basics, batch vs interactive processing).
• Strong troubleshooting skills and the ability to work from symptoms to root cause.
• Ability to communicate clearly with business users and translate needs into working solutions.

SCOPE OF ROLE

The Robotic Welding Programmer is responsible for creating and maintaining robotic welding programs. Their duties include program creation/support/improvement, part selection and development, design improvement recommendations, and robotic/automation operations training. The requirements listed below are representative of the knowledge, skill, competency and/or ability required to fulfill these duties. Other duties as assigned.

KEY RESPONSIBILITIES

Robotic Welding Programmer I Focus: Execution under guidance, Support, and learning

· Creates and edits basic robotic & automation programs using established standards.

· Reads and interprets drawings and work instructions to support program creation.

· Assists with tooling and fixture setup and basic testing.

· Makes minor mechanical or program adjustments under guidance.

· Verifies engineering information and flags discrepancies to manager.

· Notifies manager of quality concerns, delays, or equipment issues.

· Collaborates with team members to support daily production needs.

· Follows all safety guidelines and standard operating procedures.

· Remains flexible and shifts tasks based on manufacturing needs.

· Works within assigned deadlines to support production timelines.

· Participates in continuous improvement discussions.

· Performs other duties as assigned.

Robotic Welding Programmer II

Focus: Ownership of processes and independent problem-solving

· Independently creates, maintains, and improves robotic & automation programs.

· Analyzes drawings, work instructions, and engineering data to optimize programs.

· Designs, tests, and implements tooling and fixtures to support production and quality.

· Makes mechanical and program adjustments to meet quantity and quality requirements.

· Collaborates with maintenance to ensure proper and timely equipment upkeep.

· Identifies process issues and implements corrective actions.

· Suggests design improvements or alternative automation methods.

· Guides part selection and supports transition from manual to robotic operations.

· Communicates effectively with cross-functional teams regarding issues and solutions.

· Contributes ideas for continuous workflow and process improvement.

· Supports training of operators and technicians on robotic cell operation.

· Ensures work meets safety, quality, and production standards.

Robotic Welding Programmer III

Focus: Strategy, leadership, creation, and complex problem-solving

· Leads development, optimization, and standardization of robotic & automation programs.

· Provides technical direction for complex automation and integration challenges.

· Drives design improvements and alternative methods in collaboration with engineering.

· Leads tooling and fixture design strategy to improve efficiency, quality, and uptime.

· Oversees transition of processes from manual to robotic operation.

JOB DESCRIPTION: ROBOTIC WELDING PROGRAMMER

· Partners closely with maintenance and engineering to improve equipment reliability.

· Identifies systemic issues and leads root-cause analysis and long-term corrective actions.

· Mentors and trains technicians across the facility in robotic cell operation and best practices.

· Reviews and validates engineering information for manufacturability.

· Sets priorities and adjusts work to meet changing manufacturing demands.

· Champions safety, continuous improvement, and best-in-class automation practices.

· Serves as escalation point for production, quality, and automation issues.

PROFESSIONAL EXPERIENCE/QUALIFICATIONS

Minimum Requirements

· Welding certificate, technical degree, or equivalent

· Experience with robotic weld cell operation

· Robotic weld programming experience (ABB preferred)

· AutoCAD/Inventor/3D CAD experience a plus

· Experience with robotic and/or automated equipment programming

· Familiarity with PLC programming (ABB Preferred).

· Experience with sheet metal fabrication, forming, cut-to-length, and/or press brake operation. AutoCAD/Inventor/3D CAD experience a plus

Interpersonal, Leadership, and Technical Skills

· Excellent computer skills and proficiency in Word, Excel, Outlook

· Ability to manage multiple tasks.

· Excellent written and verbal communication skills

· Excellent organizational skills

· Excellent attendance and dependability

· Reading comprehension, knowledge of mathematics and use of active listening skills

· Critical thinking, logic, and reasoning to troubleshoot and solve problems.

· Time management techniques to perform job efficiently.

· Mechanical ability, working without supervision and commitment to highly accurate work.

Physical demands

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

While performing the duties of this job, the employee is regularly required to talk or hear. The employee is frequently required to use hands to finger, handle, or feel and reach with hands and arms. The employee is occasionally required to stand, walk, sit, climb, or balance and stoop, knee, crouch, or crawl. The employee must occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision.

Safety

Employees are required to wear all PPE assigned to this work area. Safety glasses, steel toe/non-slip safety shoes/boots and hearing protection are required at all times and for all areas of the production floor. This is a drug and alcohol-free work environment. Being impaired or under the influence of legal or illegal drugs is strictly prohibited while you are working.

Lead Manufacturing Engineer / CNC Programmer

$125,000 - $130,000 + 401k + Holidays + PTO + Medical + Dental + Vision + Life Insurance

Cushing, OK (Commutable from Tulsa, Oklahoma City, Guthrie, Perry, Edmond, Sand Springs, Enid, Stillwater)

Are you a Manufacturing Engineer or CNC Programmer from an Aerospace or Medical Device background looking to step into a lead position where you can train, mentor, and develop a skilled team while passing on your expertise?

On offer is an outstanding opportunity to take a lead role in strengthening a growing department, ensuring best practices are implemented, and maintaining the highest quality standards. You will oversee Manufacturing Engineers and CNC Programmers, guiding their development and driving continuous improvement.

This company is a market-leading manufacturer with a reputation for excellence, a strong culture, and partnerships with blue-chip clients at the forefront of their industries.

The role would suit an experienced Manufacturing Engineer or CNC Programmer looking to step up into a leadership position.

The Role:

• Monday to Friday 8am – 5pm
• Lead training and development, generating standard work instructions
• Problem solving and driving Continuous Improvement

The Candidate:

• CNC Programming (5-axis) experience or background as a Manufacturing Engineer (Machine shop/Aerospace environment)
• Experience with GD&T
• Passion for training, mentoring, and developing a technical team

To apply for this role or to be considered for further roles, please click "Apply Now" or contact Edward Chandler at Rise Technical Recruitment.

Rise Technical Recruitment Ltd acts an employment agency for permanent roles and an employment business for temporary roles.

The salary advertised is the bracket available for this position. The actual salary paid will be dependent on your level of experience, qualifications and skill set. We are an equal opportunities employer and welcome applications from all suitable candidates.

KEYWORDS: Lead Manufacturing Engineer, CNC Programmer, CNC Machinist, CNC Manufacturing Engineer, CNC Engineer, Machine Shop Engineer, Manufacturing Lead, Senior Manufacturing Engineer, Aerospace Manufacturing, Medical Device Manufacturing, Precision Engineering, Advanced Manufacturing, Blue-Chip Clients, High-Precision Machining, Lean Manufacturing, Continuous Improvement, Quality Standards, 5-Axis CNC Programming, GD&T, CAM Programming, CAD/CAM Software, CNC Machining Processes, Standard Work Instructions, Process Optimization, Team Leadership, Training and Mentoring, Technical Development, Upskilling Workforce, Engineering Leadership, Cross-Functional Collaboration, Best Practices Implementation, Cushing Oklahoma, Tulsa OK, Oklahoma City OK, Guthrie OK, Perry OK, Edmond OK, Sand Springs OK, Enid OK, Stillwater OK

Location: On-site

Employment Type: Contract (3-6 months)

Seniority Level: Mid-Senior

Industry: IT Services & Consulting

Job Functions: Analyst, Technical Support

JOB SUMMARY

Provide advanced technical support for enterprise iOS/iPadOS devices and services across a 7x24x365 operation. Scope includes device lifecycle activities, day‑to‑day work in Workspace One (enterprise MDM experience required; VMware Workspace ONE preferred), and carrier account management (procurement, plan optimization, billing reconciliation, SIM/eSIM lifecycle, and compliance). This role implements and supports standards defined by engineering/InfoSec and does not create new configuration profiles or perform high‑level MDM engineering.

JOB RESPONSIBILITIES

1) Mobile Device Lifecycle & UEM Administration (Support Focus)

• Provision, enroll, and configure corporate and COBO/COPE devices using Apple Business Manager Automated Device Enrollment.
• Apply and monitor MDM profiles, apps, and compliance policies as defined by engineering; troubleshoot assignment/scope issues and escalate when needed.
• Perform Tier 2/3 incident, request, and problem management for iOS/iPadOS; provide escalation support to the Service Desk.
• Support device security (passcodes/biometrics, OS updates, encryption status) and remediate non‑compliance in line with established policies.
• Execute device kitting, staging, shipping/receiving, and RMA processes with accurate CMDB/asset updates.

2) Carrier Account & Telecom Expense Management (TEM)

• Own day‑to‑day carrier account administration across supported wireless providers (e.g., line adds/changes/deactivations, number porting, device/SIM swaps, eSIM activations, IMEI/SIM tracking).
• Monitor and optimize rate plans, pooled data, features, and international roaming; recommend changes to minimize cost while meeting business needs.
• Perform monthly billing reconciliation (usage anomalies, overages, credits/disputes), cost allocation, and reporting; partner with Finance and Procurement.
• Coordinate device procurement (corporate buying programs, upgrades, trade‑in/buyback, warranty/insurance) and maintain accurate inventories.
• Ensure regulatory and emergency services readiness (e.g., E911 records where applicable), fraud prevention (SIM/eSIM security), and loss/theft controls.
• Maintain carrier portals, account hierarchies, and user permissions; document processes and KPIs (cycle time, cost per line, optimization savings).

3) Security, Compliance & Access (Implementation)

• Participate in security incident response for mobile threats (phishing, lost/stolen devices); execute remote lock/wipe and evidence preservation.
• Contribute to audit, risk, and compliance activities (SOX, PCI, privacy) by maintaining accurate records and consistent controls.

4) Service Delivery & End‑User Experience

• Deliver high‑quality deskside/remote support for executives and front‑line staff; prioritize critical operational roles.
• Maintain and continuously improve SLA/OLA performance (response, restore, request fulfillment); publish support playbooks and knowledge articles.
• Provide VIP/mission‑critical support during operations, travel, and events, including on‑call rotation in a 7x24x365 environment.

5) Asset, Inventory & CMDB

• Track mobile assets end‑to‑end (request → deployment → in‑service → repair → decommission/sanitation) and maintain accurate CMDB and stock levels.
• Reconcile device inventory with carrier billing and MDM records; remediate orphaned lines/devices.

6) Projects & Continuous Improvement (Execution)

• Support mobile‑related projects (iOS updates, app rollouts) by executing tasks under guidance, participating in UAT/pilots.
• Recommend process improvements and self‑service opportunities; update SOPs/KBs to reduce repeat tickets and improve reliability (no custom MDM engineering or scripting expected).
• Evaluate new devices and accessories; document results and provide feedback into standards.

7) Documentation & Knowledge Management

• Create and maintain standard operating procedures (SOPs), runbooks, and end‑user guides with inclusive, plain language.
• Publish and maintain knowledge base articles for the Service Desk and end users; deliver targeted training where needed.

8) Vendor, Carrier & Stakeholder Management

• Build strong partnerships with carriers, OEMs, and MDM vendors; manage escalations and service requests to resolution.
• Collaborate with Security, Networking, Procurement, Finance, HR, and Business Operations to align mobile services with business outcomes.
• Track and report KPIs (ticket volume, MTTR, compliance rate, device health, cost per line, optimization savings) and drive data‑informed decisions.

9) Mentorship & Team Development

• Mentor associate and mid‑level analysts on iOS/iPadOS support workflows, MDM usage, and carrier processes; contribute to cross‑training and skill growth.
• Promote a culture of safety, inclusion, and continuous learning.

Note: This list is not exhaustive; additional duties may be assigned based on business needs.

QUALIFICATIONS

Education

• Associate’s degree in Information Technology or a related field; or equivalent practical experience.

Work Experience

• 4–6 years in enterprise end‑user support with at least **3 years focused on iOS/iPadOS enterprise **support.
• Required: Enterprise MDM experience, Preferred: Experience with VMware Workspace ONE supporting large‑scale iOS fleets.
• Carrier account administration and telecom expense management (activations, ports, plan optimization, billing reconciliation).

Knowledge, Skills, and Abilities (KSAOs)

• Deep knowledge of iOS/iPadOS end‑user and admin features (managed apps, per‑app VPN, app configs, managed open‑in, DLP, device compliance) with an emphasis on support and implementation.
• Working knowledge of MDM platforms to apply existing profiles/policies, assign apps, troubleshoot scoping/compliance, and escalate engineering issues appropriately.
• Familiarity with Apple Business Manager (Apps & Books, Managed Apple IDs, Automated Device Enrollment) and related support workflows.
• Practical understanding of carrier services: SIM/eSIM lifecycle, IMEI tracking, number assignment/porting, international roaming, and cost controls.
• Data analysis for telecom billing reconciliation (Excel/Sheets, pivot tables, lookups) and KPI reporting.
• Excellent communication, customer service, and stakeholder management; ability to explain technical topics in plain language.
• Basic scripting/reporting familiarity is a plus (e.g., exported reports, simple data cleanup); no custom MDM scripting required.
• Knowledge of ITIL practices (incident, problem, change, request, CMDB/asset).
• Ability to lift and carry mobile equipment/shipments (up to ~20 lbs).

Certifications (Preferred)

• Apple Device Support/Deployment certifications.
• Microsoft 365 Certified: Endpoint Administrator Associate (MD‑102) or equivalent.
• VMware/Omnissa VCP‑DWS (preferred).

WORKING CONDITIONS

• Supports a 7x24x365 operation with occasional after‑hours work and on‑call rotation.
• May require limited travel for deployments, vendor meetings, or training.