Production Code Rules Jobs in Usa
6,964 positions found — Page 3
H
Production Operator-Panel Assembler
✦ New
Salary not disclosed
Job Description
Specific Duties
Retains all specific duties of Production Operator Job Description.
Follow proper start up and shut down procedures when booths.
Alert immediate manager of any issues with booths and assist with cleaning and maintenance of the equipment when safe and appropriate.
Ability to place panels correctly to reduce rework and extra trimming on tanks.
Follow all applicable environmental, health and safety rules and procedures and immediately report all dangerous situations, near-misses, and injuries.
Participate in developing and updating risk assessments and review all applicable risk assessments annually.
Other Duties
Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice.
Qualifications
Retains all qualifications of Production Operator Job Description.
Previous experience working with adhesives in a manufacturing environment is preferred.
Physical Demands
The physical demands described here are representative of those that must be met by an employee to perform the essential functions of this job successfully.
The employee frequently is required to stand; walk, talk and hear. The employee is occasionally required to climb or balance and stoop. A large degree of lifting (moderate to heavyweight), bending, squatting and maneuvering. Specific vision abilities required by this job include close vision, for viewing a computer terminal distance vision, peripheral vision, depth perception vision for moving objects and ability to adjust focus.
This position is not substantially exposed to adverse environmental conditions.
The ability to work with chemicals in the proper environment and while wearing PPE.
Personal Protective Equipment
The following list of PPE is required while in the manufacturing area:
Safety Glasses conforming to ANSI Z87.1 or higher
Steel Toe Safety Shoes conforming to OSHA General Industry Standards 29 CFR 1910
Hearing protection conforming to OSHA General Industry Standards 29 CFR 1910
The ability to wear a dust mask conforming to OSHA General Industry Standards 39 CFR 1910.134
Additional PPE may be required depending on the department
Hutchinson Industries, Inc. is an equal opportunity employer.
This is a non-exempt position. Hutchinson Industries, Inc. reserves the right to modify the job description based upon its needs and may require the employee to perform functions beyond those mentioned above. Neither this job description nor any other communication creates an employment contract between Hutchinson Industries, Inc. nor the employee, and either one may terminate employment without notice at any time.
1st Shift: 6:00 am-4:30 pm Monday-Thursday
About Us
We are 40 000 men and women who meet the challenges faced by our automotive, aviation, defence and industry customers every day. Our passion for challenge and our enthusiasm encourage us to imagine, design and produce high performance and innovative fluid, sealing system and anti-vibration solutions. Working at Hutchinson means being curious about everything, contributing to the evolution of mobility and reducing carbon emissions.
Join us and show what drives you!
A French company with an international presence (25 countries): 170 years of history and passing on our know-how.
5 billion in turnover, with 5% invested in R&D.
Specific Duties
Retains all specific duties of Production Operator Job Description.
Follow proper start up and shut down procedures when booths.
Alert immediate manager of any issues with booths and assist with cleaning and maintenance of the equipment when safe and appropriate.
Ability to place panels correctly to reduce rework and extra trimming on tanks.
Follow all applicable environmental, health and safety rules and procedures and immediately report all dangerous situations, near-misses, and injuries.
Participate in developing and updating risk assessments and review all applicable risk assessments annually.
Other Duties
Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice.
Qualifications
Retains all qualifications of Production Operator Job Description.
Previous experience working with adhesives in a manufacturing environment is preferred.
Physical Demands
The physical demands described here are representative of those that must be met by an employee to perform the essential functions of this job successfully.
The employee frequently is required to stand; walk, talk and hear. The employee is occasionally required to climb or balance and stoop. A large degree of lifting (moderate to heavyweight), bending, squatting and maneuvering. Specific vision abilities required by this job include close vision, for viewing a computer terminal distance vision, peripheral vision, depth perception vision for moving objects and ability to adjust focus.
This position is not substantially exposed to adverse environmental conditions.
The ability to work with chemicals in the proper environment and while wearing PPE.
Personal Protective Equipment
The following list of PPE is required while in the manufacturing area:
Safety Glasses conforming to ANSI Z87.1 or higher
Steel Toe Safety Shoes conforming to OSHA General Industry Standards 29 CFR 1910
Hearing protection conforming to OSHA General Industry Standards 29 CFR 1910
The ability to wear a dust mask conforming to OSHA General Industry Standards 39 CFR 1910.134
Additional PPE may be required depending on the department
Hutchinson Industries, Inc. is an equal opportunity employer.
This is a non-exempt position. Hutchinson Industries, Inc. reserves the right to modify the job description based upon its needs and may require the employee to perform functions beyond those mentioned above. Neither this job description nor any other communication creates an employment contract between Hutchinson Industries, Inc. nor the employee, and either one may terminate employment without notice at any time.
1st Shift: 6:00 am-4:30 pm Monday-Thursday
About Us
We are 40 000 men and women who meet the challenges faced by our automotive, aviation, defence and industry customers every day. Our passion for challenge and our enthusiasm encourage us to imagine, design and produce high performance and innovative fluid, sealing system and anti-vibration solutions. Working at Hutchinson means being curious about everything, contributing to the evolution of mobility and reducing carbon emissions.
Join us and show what drives you!
A French company with an international presence (25 countries): 170 years of history and passing on our know-how.
5 billion in turnover, with 5% invested in R&D.
Not Specified
Production Coordinator - SMT/Thru-hole Operations (FLORENCE)
Salary not disclosed
SUMMARY
Directs the activities of the Machine Support group. Responsible for maintaining production schedules and ensuring that quality standards are adhered to by the group.
**Hands-on experience and knowledge of Surface Mount Technologies (SMT) and Thru-hole equipment/gear.
ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned.
LEADERSHIP AND MANAGEMENT RESPONSIBILITIES
Recruitment and Retention:
· Recruit, interview and hire Process Engineers, Industrial Techs, WAVE Techs, and Machine Support Techs
· Communicate criteria to recruiters for Process Engineers, Industrial Techs, WAVE Techs, and Machine Support Techs candidates.
· Coach machine support department staff in the interviewing/hiring process.
· Monitor team member turnover; identify key factors that can be improved; make improvements.
Employee and Team Development:
· Identify individual and team strengths and development needs on an ongoing basis.
· Create and/or validate training curriculum in area of responsibility.
· Coach and mentor tooling department staff to deliver excellence to every internal and external customer.
· Create and manage succession plans for the machine shop function.
Performance Management:
· Establish clear measurable goals and objectives by which to determine individual and team results (i.e. operational metrics, results against project timelines, training documentation, attendance records, knowledge of operational roles and responsibilities, personal development goals).
· Solicit ongoing feedback from Workcell Manager (WCM), Business Unit Manager (BUM), peers and team member on the PE team member’s contribution to the workcell. Provide ongoing coaching and counseling to team member based on feedback.
· Express pride in staff and encourage them to feel good about their accomplishments.
· Perform team member evaluations professionally and on time.
· Drive individuals and the team to continuously improve in key operational metrics and the achievement of the organizational goals.
· Coordinate activities of large teams and keep them focused in times of crises.
· Ensure recognition and rewards are managed fairly and consistently in area of responsibility.
Communication:
· Provide communication forum for the exchange of ideas and information with the department.
· Organize verbal and written ideas clearly and use an appropriate business style.
· Ask questions; encourage input from team members.
· Assess communication style of individual team members and adapt own communication style accordingly.
TECHNICAL MANAGEMENT RESPONSIBILITIES
· Oversees the maintenance management program including repair parts, preventative maintenance, feeder maintenance, and the support equipment maintenance program
· Plans the activities of the technical staff
· Develops and maintains all department reports/records
· Supervises the planning and execution of line moves and builds
· Schedules equipment vendors for installation, repair and updates of equipment
· Assure that procedures and work instructions are efficient and not redundant.
· Offer new ideas and suggestions for improvement. Identify and implement new practices and processes that are “best in field.”
· Demonstrate a commitment to customer service; anticipate, meet, and exceed expectations by solving problems quickly and effectively; making customer issues a priority.
· Lead by example; “walk the talk.”
· Utilize Jabil’s Advanced Engineering group to ensure useful support to Jabil South.
· Establish new measurement systems if/where possible.
· Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor.
Comply with all procedures within the company security policy.
MINIMUM REQUIREMENTS
Bachelor’s degree in Engineering preferred; and three years experience in maintenance management; or equivalent combination of education and experience. Hands-on experience and knowledge of Surface Mount Technologies (SMT) and Thru-hole equipment/gear, process optimization, Statistical Process Control, Design for Manufacturability, Design for Test, Demand Flow Technology (line balancing), and Design of Experiment methodologies. Knowledge of engineering disciplines including chemistry, mechanical, electrical, and industrial as it pertains to surface mount and final assembly.
Directs the activities of the Machine Support group. Responsible for maintaining production schedules and ensuring that quality standards are adhered to by the group.
**Hands-on experience and knowledge of Surface Mount Technologies (SMT) and Thru-hole equipment/gear.
ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned.
LEADERSHIP AND MANAGEMENT RESPONSIBILITIES
Recruitment and Retention:
· Recruit, interview and hire Process Engineers, Industrial Techs, WAVE Techs, and Machine Support Techs
· Communicate criteria to recruiters for Process Engineers, Industrial Techs, WAVE Techs, and Machine Support Techs candidates.
· Coach machine support department staff in the interviewing/hiring process.
· Monitor team member turnover; identify key factors that can be improved; make improvements.
Employee and Team Development:
· Identify individual and team strengths and development needs on an ongoing basis.
· Create and/or validate training curriculum in area of responsibility.
· Coach and mentor tooling department staff to deliver excellence to every internal and external customer.
· Create and manage succession plans for the machine shop function.
Performance Management:
· Establish clear measurable goals and objectives by which to determine individual and team results (i.e. operational metrics, results against project timelines, training documentation, attendance records, knowledge of operational roles and responsibilities, personal development goals).
· Solicit ongoing feedback from Workcell Manager (WCM), Business Unit Manager (BUM), peers and team member on the PE team member’s contribution to the workcell. Provide ongoing coaching and counseling to team member based on feedback.
· Express pride in staff and encourage them to feel good about their accomplishments.
· Perform team member evaluations professionally and on time.
· Drive individuals and the team to continuously improve in key operational metrics and the achievement of the organizational goals.
· Coordinate activities of large teams and keep them focused in times of crises.
· Ensure recognition and rewards are managed fairly and consistently in area of responsibility.
Communication:
· Provide communication forum for the exchange of ideas and information with the department.
· Organize verbal and written ideas clearly and use an appropriate business style.
· Ask questions; encourage input from team members.
· Assess communication style of individual team members and adapt own communication style accordingly.
TECHNICAL MANAGEMENT RESPONSIBILITIES
· Oversees the maintenance management program including repair parts, preventative maintenance, feeder maintenance, and the support equipment maintenance program
· Plans the activities of the technical staff
· Develops and maintains all department reports/records
· Supervises the planning and execution of line moves and builds
· Schedules equipment vendors for installation, repair and updates of equipment
· Assure that procedures and work instructions are efficient and not redundant.
· Offer new ideas and suggestions for improvement. Identify and implement new practices and processes that are “best in field.”
· Demonstrate a commitment to customer service; anticipate, meet, and exceed expectations by solving problems quickly and effectively; making customer issues a priority.
· Lead by example; “walk the talk.”
· Utilize Jabil’s Advanced Engineering group to ensure useful support to Jabil South.
· Establish new measurement systems if/where possible.
· Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor.
Comply with all procedures within the company security policy.
MINIMUM REQUIREMENTS
Bachelor’s degree in Engineering preferred; and three years experience in maintenance management; or equivalent combination of education and experience. Hands-on experience and knowledge of Surface Mount Technologies (SMT) and Thru-hole equipment/gear, process optimization, Statistical Process Control, Design for Manufacturability, Design for Test, Demand Flow Technology (line balancing), and Design of Experiment methodologies. Knowledge of engineering disciplines including chemistry, mechanical, electrical, and industrial as it pertains to surface mount and final assembly.
temporary
Production Supervisor - Test Dept (403 Shift Days) (FLORENCE)
🏢 JABIL CIRCUIT, INC
Salary not disclosed
SUMMARY
Directs the activities of the Machine Support group. Responsible for maintaining production schedules and ensuring that quality standards are adhered to by the group.
**Hands-on experience and knowledge of Surface Mount Technologies (SMT) and Thru-hole equipment/gear.
ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned.
LEADERSHIP AND MANAGEMENT RESPONSIBILITIES
Recruitment and Retention:
· Recruit, interview and hire Process Engineers, Industrial Techs, WAVE Techs, and Machine Support Techs
· Communicate criteria to recruiters for Process Engineers, Industrial Techs, WAVE Techs, and Machine Support Techs candidates.
· Coach machine support department staff in the interviewing/hiring process.
· Monitor team member turnover; identify key factors that can be improved; make improvements.
Employee and Team Development:
· Identify individual and team strengths and development needs on an ongoing basis.
· Create and/or validate training curriculum in area of responsibility.
· Coach and mentor tooling department staff to deliver excellence to every internal and external customer.
· Create and manage succession plans for the machine shop function.
Performance Management:
· Establish clear measurable goals and objectives by which to determine individual and team results (i.e. operational metrics, results against project timelines, training documentation, attendance records, knowledge of operational roles and responsibilities, personal development goals).
· Solicit ongoing feedback from Workcell Manager (WCM), Business Unit Manager (BUM), peers and team member on the PE team member’s contribution to the workcell. Provide ongoing coaching and counseling to team member based on feedback.
· Express pride in staff and encourage them to feel good about their accomplishments.
· Perform team member evaluations professionally and on time.
· Drive individuals and the team to continuously improve in key operational metrics and the achievement of the organizational goals.
· Coordinate activities of large teams and keep them focused in times of crises.
· Ensure recognition and rewards are managed fairly and consistently in area of responsibility.
Communication:
· Provide communication forum for the exchange of ideas and information with the department.
· Organize verbal and written ideas clearly and use an appropriate business style.
· Ask questions; encourage input from team members.
· Assess communication style of individual team members and adapt own communication style accordingly.
TECHNICAL MANAGEMENT RESPONSIBILITIES
· Oversees the maintenance management program including repair parts, preventative maintenance, feeder maintenance, and the support equipment maintenance program
· Plans the activities of the technical staff
· Develops and maintains all department reports/records
· Supervises the planning and execution of line moves and builds
· Schedules equipment vendors for installation, repair and updates of equipment
· Assure that procedures and work instructions are efficient and not redundant.
· Offer new ideas and suggestions for improvement. Identify and implement new practices and processes that are “best in field.”
· Demonstrate a commitment to customer service; anticipate, meet, and exceed expectations by solving problems quickly and effectively; making customer issues a priority.
· Lead by example; “walk the talk.”
· Utilize Jabil’s Advanced Engineering group to ensure useful support to Jabil South.
· Establish new measurement systems if/where possible.
· Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor.
Comply with all procedures within the company security policy.
MINIMUM REQUIREMENTS
Bachelor’s degree in Engineering preferred; and three years experience in maintenance management; or equivalent combination of education and experience. Hands-on experience and knowledge of Surface Mount Technologies (SMT) and Thru-hole equipment/gear, process optimization, Statistical Process Control, Design for Manufacturability, Design for Test, Demand Flow Technology (line balancing), and Design of Experiment methodologies. Knowledge of engineering disciplines including chemistry, mechanical, electrical, and industrial as it pertains to surface mount and final assembly.
Directs the activities of the Machine Support group. Responsible for maintaining production schedules and ensuring that quality standards are adhered to by the group.
**Hands-on experience and knowledge of Surface Mount Technologies (SMT) and Thru-hole equipment/gear.
ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned.
LEADERSHIP AND MANAGEMENT RESPONSIBILITIES
Recruitment and Retention:
· Recruit, interview and hire Process Engineers, Industrial Techs, WAVE Techs, and Machine Support Techs
· Communicate criteria to recruiters for Process Engineers, Industrial Techs, WAVE Techs, and Machine Support Techs candidates.
· Coach machine support department staff in the interviewing/hiring process.
· Monitor team member turnover; identify key factors that can be improved; make improvements.
Employee and Team Development:
· Identify individual and team strengths and development needs on an ongoing basis.
· Create and/or validate training curriculum in area of responsibility.
· Coach and mentor tooling department staff to deliver excellence to every internal and external customer.
· Create and manage succession plans for the machine shop function.
Performance Management:
· Establish clear measurable goals and objectives by which to determine individual and team results (i.e. operational metrics, results against project timelines, training documentation, attendance records, knowledge of operational roles and responsibilities, personal development goals).
· Solicit ongoing feedback from Workcell Manager (WCM), Business Unit Manager (BUM), peers and team member on the PE team member’s contribution to the workcell. Provide ongoing coaching and counseling to team member based on feedback.
· Express pride in staff and encourage them to feel good about their accomplishments.
· Perform team member evaluations professionally and on time.
· Drive individuals and the team to continuously improve in key operational metrics and the achievement of the organizational goals.
· Coordinate activities of large teams and keep them focused in times of crises.
· Ensure recognition and rewards are managed fairly and consistently in area of responsibility.
Communication:
· Provide communication forum for the exchange of ideas and information with the department.
· Organize verbal and written ideas clearly and use an appropriate business style.
· Ask questions; encourage input from team members.
· Assess communication style of individual team members and adapt own communication style accordingly.
TECHNICAL MANAGEMENT RESPONSIBILITIES
· Oversees the maintenance management program including repair parts, preventative maintenance, feeder maintenance, and the support equipment maintenance program
· Plans the activities of the technical staff
· Develops and maintains all department reports/records
· Supervises the planning and execution of line moves and builds
· Schedules equipment vendors for installation, repair and updates of equipment
· Assure that procedures and work instructions are efficient and not redundant.
· Offer new ideas and suggestions for improvement. Identify and implement new practices and processes that are “best in field.”
· Demonstrate a commitment to customer service; anticipate, meet, and exceed expectations by solving problems quickly and effectively; making customer issues a priority.
· Lead by example; “walk the talk.”
· Utilize Jabil’s Advanced Engineering group to ensure useful support to Jabil South.
· Establish new measurement systems if/where possible.
· Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor.
Comply with all procedures within the company security policy.
MINIMUM REQUIREMENTS
Bachelor’s degree in Engineering preferred; and three years experience in maintenance management; or equivalent combination of education and experience. Hands-on experience and knowledge of Surface Mount Technologies (SMT) and Thru-hole equipment/gear, process optimization, Statistical Process Control, Design for Manufacturability, Design for Test, Demand Flow Technology (line balancing), and Design of Experiment methodologies. Knowledge of engineering disciplines including chemistry, mechanical, electrical, and industrial as it pertains to surface mount and final assembly.
temporary
Production Supervisor - Test Dept (403 Shift Days) - Specializes in Advanced SMT Technology (FLORENCE)
🏢 JABIL CIRCUIT, INC
Salary not disclosed
SUMMARY
Directs the activities of the Machine Support group. Responsible for maintaining production schedules and ensuring that quality standards are adhered to by the group.
**Hands-on experience and knowledge of Surface Mount Technologies (SMT) and Thru-hole equipment/gear.
ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned.
LEADERSHIP AND MANAGEMENT RESPONSIBILITIES
Recruitment and Retention:
· Recruit, interview and hire Process Engineers, Industrial Techs, WAVE Techs, and Machine Support Techs
· Communicate criteria to recruiters for Process Engineers, Industrial Techs, WAVE Techs, and Machine Support Techs candidates.
· Coach machine support department staff in the interviewing/hiring process.
· Monitor team member turnover; identify key factors that can be improved; make improvements.
Employee and Team Development:
· Identify individual and team strengths and development needs on an ongoing basis.
· Create and/or validate training curriculum in area of responsibility.
· Coach and mentor tooling department staff to deliver excellence to every internal and external customer.
· Create and manage succession plans for the machine shop function.
Performance Management:
· Establish clear measurable goals and objectives by which to determine individual and team results (i.e. operational metrics, results against project timelines, training documentation, attendance records, knowledge of operational roles and responsibilities, personal development goals).
· Solicit ongoing feedback from Workcell Manager (WCM), Business Unit Manager (BUM), peers and team member on the PE team member’s contribution to the workcell. Provide ongoing coaching and counseling to team member based on feedback.
· Express pride in staff and encourage them to feel good about their accomplishments.
· Perform team member evaluations professionally and on time.
· Drive individuals and the team to continuously improve in key operational metrics and the achievement of the organizational goals.
· Coordinate activities of large teams and keep them focused in times of crises.
· Ensure recognition and rewards are managed fairly and consistently in area of responsibility.
Communication:
· Provide communication forum for the exchange of ideas and information with the department.
· Organize verbal and written ideas clearly and use an appropriate business style.
· Ask questions; encourage input from team members.
· Assess communication style of individual team members and adapt own communication style accordingly.
TECHNICAL MANAGEMENT RESPONSIBILITIES
· Oversees the maintenance management program including repair parts, preventative maintenance, feeder maintenance, and the support equipment maintenance program
· Plans the activities of the technical staff
· Develops and maintains all department reports/records
· Supervises the planning and execution of line moves and builds
· Schedules equipment vendors for installation, repair and updates of equipment
· Assure that procedures and work instructions are efficient and not redundant.
· Offer new ideas and suggestions for improvement. Identify and implement new practices and processes that are “best in field.”
· Demonstrate a commitment to customer service; anticipate, meet, and exceed expectations by solving problems quickly and effectively; making customer issues a priority.
· Lead by example; “walk the talk.”
· Utilize Jabil’s Advanced Engineering group to ensure useful support to Jabil South.
· Establish new measurement systems if/where possible.
· Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor.
Comply with all procedures within the company security policy.
MINIMUM REQUIREMENTS
Bachelor’s degree in Engineering preferred; and three years experience in maintenance management; or equivalent combination of education and experience. Hands-on experience and knowledge of Surface Mount Technologies (SMT) and Thru-hole equipment/gear, process optimization, Statistical Process Control, Design for Manufacturability, Design for Test, Demand Flow Technology (line balancing), and Design of Experiment methodologies. Knowledge of engineering disciplines including chemistry, mechanical, electrical, and industrial as it pertains to surface mount and final assembly.
Directs the activities of the Machine Support group. Responsible for maintaining production schedules and ensuring that quality standards are adhered to by the group.
**Hands-on experience and knowledge of Surface Mount Technologies (SMT) and Thru-hole equipment/gear.
ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned.
LEADERSHIP AND MANAGEMENT RESPONSIBILITIES
Recruitment and Retention:
· Recruit, interview and hire Process Engineers, Industrial Techs, WAVE Techs, and Machine Support Techs
· Communicate criteria to recruiters for Process Engineers, Industrial Techs, WAVE Techs, and Machine Support Techs candidates.
· Coach machine support department staff in the interviewing/hiring process.
· Monitor team member turnover; identify key factors that can be improved; make improvements.
Employee and Team Development:
· Identify individual and team strengths and development needs on an ongoing basis.
· Create and/or validate training curriculum in area of responsibility.
· Coach and mentor tooling department staff to deliver excellence to every internal and external customer.
· Create and manage succession plans for the machine shop function.
Performance Management:
· Establish clear measurable goals and objectives by which to determine individual and team results (i.e. operational metrics, results against project timelines, training documentation, attendance records, knowledge of operational roles and responsibilities, personal development goals).
· Solicit ongoing feedback from Workcell Manager (WCM), Business Unit Manager (BUM), peers and team member on the PE team member’s contribution to the workcell. Provide ongoing coaching and counseling to team member based on feedback.
· Express pride in staff and encourage them to feel good about their accomplishments.
· Perform team member evaluations professionally and on time.
· Drive individuals and the team to continuously improve in key operational metrics and the achievement of the organizational goals.
· Coordinate activities of large teams and keep them focused in times of crises.
· Ensure recognition and rewards are managed fairly and consistently in area of responsibility.
Communication:
· Provide communication forum for the exchange of ideas and information with the department.
· Organize verbal and written ideas clearly and use an appropriate business style.
· Ask questions; encourage input from team members.
· Assess communication style of individual team members and adapt own communication style accordingly.
TECHNICAL MANAGEMENT RESPONSIBILITIES
· Oversees the maintenance management program including repair parts, preventative maintenance, feeder maintenance, and the support equipment maintenance program
· Plans the activities of the technical staff
· Develops and maintains all department reports/records
· Supervises the planning and execution of line moves and builds
· Schedules equipment vendors for installation, repair and updates of equipment
· Assure that procedures and work instructions are efficient and not redundant.
· Offer new ideas and suggestions for improvement. Identify and implement new practices and processes that are “best in field.”
· Demonstrate a commitment to customer service; anticipate, meet, and exceed expectations by solving problems quickly and effectively; making customer issues a priority.
· Lead by example; “walk the talk.”
· Utilize Jabil’s Advanced Engineering group to ensure useful support to Jabil South.
· Establish new measurement systems if/where possible.
· Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor.
Comply with all procedures within the company security policy.
MINIMUM REQUIREMENTS
Bachelor’s degree in Engineering preferred; and three years experience in maintenance management; or equivalent combination of education and experience. Hands-on experience and knowledge of Surface Mount Technologies (SMT) and Thru-hole equipment/gear, process optimization, Statistical Process Control, Design for Manufacturability, Design for Test, Demand Flow Technology (line balancing), and Design of Experiment methodologies. Knowledge of engineering disciplines including chemistry, mechanical, electrical, and industrial as it pertains to surface mount and final assembly.
temporary
Production Quality Analyst (MEMPHIS)
🏢 JABIL CIRCUIT, INC
Salary not disclosed
SUMMARY
To assist the Quality Assurance function as technical support in issues affecting manufacturing. To support and drive corrective action efforts.
ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned.
· Ensure capability studies are performed on critical processes.
· Perform first article inspection and review visual aids.
· Perform defect analysis reporting.
· Perform MRB on sustained products.
· Participate in CAC meetings – support continuous improvement.
· Perform line and product audits.
· Assist Quality Engineering in APQP.
· Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor.
· Comply and follow all procedures within the company security policy.
MINIMUM REQUIREMENTS
Bachelor's degree preferred; or equivalent combination of education and experience.
To assist the Quality Assurance function as technical support in issues affecting manufacturing. To support and drive corrective action efforts.
ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned.
· Ensure capability studies are performed on critical processes.
· Perform first article inspection and review visual aids.
· Perform defect analysis reporting.
· Perform MRB on sustained products.
· Participate in CAC meetings – support continuous improvement.
· Perform line and product audits.
· Assist Quality Engineering in APQP.
· Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor.
· Comply and follow all procedures within the company security policy.
MINIMUM REQUIREMENTS
Bachelor's degree preferred; or equivalent combination of education and experience.
temporary
H
Operator - Production & Packaging
✦ New
Salary not disclosed
Operator - Production & Packaging Start: immediately in Pleasant Prairie, WI / United States Permanent position, Full-time
Apply now
We are the world's #1 gummi candy manufacturer. It's a great time to join our growing organization and help spread "Childlike Happiness" (one of our core values) to consumers across the United States. Reporting to the Shift Supervisor, the Operator - Production & Packaging is responsible for safely and efficiently operating, maintaining, and cleaning production and packaging equipment across multiple areas-including kitchen, mogul, and packaging lines. The Operator - Production & Packaging ensures all work meets quality, food safety, environmental, and cost standards while supporting production schedules and minimizing downtime. Operators partner with support teams using problem-solving techniques and a continuous-improvement mindset to identify and reduce unplanned losses in safety, quality, and efficiency.
Responsibilities:
- Safely operate, monitor, adjust, and clean assigned production and packaging equipment.
- Conduct routine inspections and preventative maintenance to ensure proper functionality.
- Prepare equipment for changeovers, including size and material adjustments.
- Load raw materials, premixes, and packaging materials to maintain continuous line flow.
- Perform quality checks, including product specifications, coding, sealing, weights, and packaging integrity.
- Responsible for training and coaching others in the assigned areas.
- Other duties as assigned.
Qualifications:
- Requires high school diploma or equivalent (HSED/GED).
- Requires three (3) years of progressive manufacturing and/or packaging experience.
- Must be flexible with off-shift work schedule and overtime as needed.
- Ability to handle stress and to interact with others to establish and maintain a positive and productive work environment and minimize personal conflicts.
Preferred Qualifications:
- Machine operations preferably in the fast-moving consumer goods/food/beverage/pharma industries.
- Understanding of manufacturing and packaging equipment (cooking/molding, weighing, wrapping, coding, case packing, palletizing, etc.).
- Knowledgeable of food safety and food quality standards and regulations such as SQF and environmental and people-based safety practices and regulations.
- Knowledge of ERP systems preferably SAP.
Skills:
- Basic computer skills (Word, Excel, PowerPoint, Outlook); SAP experience preferred.
- Strong teamwork and communication skills.
- Requires basic mathematical skills to be able to add, subtract, multiply, divide, and work with percentages.
- Strong written and verbal communication skills in English to document work, communicate with management, and collaborate with colleagues.
Physical Requirements:
- Standing/walking: Continuous (over 75%)
- Talking/hearing: Continuous (over 75%)
- Hand/finger dexterity: Frequent to continuous
- Climbing, bending, kneeling, crouching: Frequent
- Lifting/carrying up to 35-50 lbs: Frequent to continuous
- Ability to multitask and function in high-stress environments
- Work performed indoors with artificial lighting, mid-level noise, and proper ventilation
HARIBO of America, Inc. is an Equal Employment Opportunity Employer and maintains a Drug-Free Workplace. Employment at HARIBO of America, Inc. is subject to post offer, pre-employment drug testing. The Company's policy is not to discriminate against any applicant or employee based on race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, including protected veteran status, genetic information or any other basis protected by applicable federal, state, or local laws. HARIBO also prohibits harassment of applicants or employees based on any of these protected categories. It is also HARIBO's policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions.
HARIBO is committed to recruiting, hiring and promoting people with disabilities and veterans. If you need an accommodation to assist with completing the electronic application, please contact the location for which you are applying and ask to speak with the human resources representative or email .
Apply now
Not Specified
F
Sign Production Specialist
✦ New
Salary not disclosed
Sign Production Specialist
Under general direction, this full-time FASTSIGNS Sign Production Specialist position is responsible for all aspects of the physical production of signs. Sign assembly includes preparing substrates and using the proper machines and techniques to construct products according to written instructions.
Benefits include:
- 401(k) matching
- Competitive salary
- Health insurance
- Paid time off
- Training & development
Benefits/Perks:
- Competitive Pay
- Paid Vacation and Holidays
- Performance Bonus
- Ongoing Training Opportunities
Sign Production Specialist Job Summary:
- Follow a layout to place computer-cut vinyl or full-color graphic image(s) on a predetermined substrate or medium.
- Prepare substrates for vinyl application. This may include cutting, painting, laminating, cleaning, etc.
- Weed excess vinyl from computer-cut images. Weeding techniques vary with size, type of vinyl, and complexity of images.
- Operate and maintain printer(s).
- Perform quality assurance measures pre- and post-production by accurately reading and interpreting a Work Order and then proofing for errors or unacceptable standards.
- Perform finishing operations such as laminating and/or mounting of printed pieces.
- Report inventory levels and stock to be reordered to the center manager/production manager or franchisee.
- Clean and maintain storage areas.
- Work on multiple projects simultaneously.
Sign Production Specialist Responsibilities:
- Follow a layout to place computer-cut vinyl or full-color graphic image(s) on a predetermined substrate or medium.
- Prepare substrates for vinyl application. This may include cutting, painting, laminating, cleaning, and maintaining the substrates for vinyl application.
- Weed excess vinyl from computer-cut images. Weeding techniques vary with size, type of vinyl, and complexity of the image.
- Operate and maintain printer(s).
- Perform quality assurance measures pre- and post-production by accurately reading and interpreting a Work Order and then proofing for errors or unacceptable standards.
- Perform finishing operations such as laminating, encapsulating, and/or mounting printed pieces.
- Perform installations at customer locations or other off-site locations as necessary.
- Communicate with other employees and customers calmly and professionally.
- Communicate with other employees regarding timing, extra charges, and other production considerations to be accounted for in completing projects.
- Manage the inventory purchasing and storage process.
- Report inventory levels and stock to be reordered to the center manager/production manager or franchisee.
- Help unload and store raw materials; clean and maintain storage areas.
- Work on multiple projects simultaneously.
- Perform routine machine maintenance and minor repairs when necessary.
- Keep the production area neat, clean, and organized.
- Adhere to all company policies, procedures, and business ethics codes.
- Participate in and practice the brand mentality of \"Everybody Sells.\" Constantly be looking for sales opportunities for the center.
- Serve as a backup for answering the phone if the franchisee, manager, and sales/service employees are busy assisting other customers. Assist at the front counter as needed.
- Understand the sales process enough to consult with customers to determine project needs and solutions.
Typical Physical Demands:
- Ability to stand for long periods of time.
- Ability to lift 50 or more pounds.
- Flexibility to lean over a waist-high table and use back and forth hand motion to apply vinyl letters and graphics to a substrate.
- Ability to work under pressure to output high volume, high-quality work.
- Ability to use light power equipment.
At FASTSIGNS, every day is unique and presents exciting opportunities, including new ways to use your talent and grow your skills. We have a large network of independently owned locations - both locally and internationally - who offer competitive pay and ongoing training opportunities.
Are you ready to plan for your future? Discover your next career. Make your statement.
Learn more by exploring the positions offered by FASTSIGNS centers.
Not Specified
C
Production Specialist ( D Shift: 6pm to 6am)
✦ New 🏢 CONAGRA
Salary not disclosed
Shift: 6:00 PM-6:00 AMHourly Rate: $20.17 an hour + $1.50 shift differential
Do you have a taste for something big? If you're looking for the opportunity to reach your potential, consider Conagra Brands as your next career destination. Conagra Brands in Darien, WI a local supplier of Birds Eye products, is seeking qualified individuals to fill a Production Specialist role in the production department for D shift. Reporting to Production Supervisors, you will work on-site at one of Conagra's largest manufacturing facilities with over 800 employees.
As a Production Specialist, you will play a key role in supporting production operations by ensuring product quality, packaging compliance, and adherence to safety and food handling standards. This position requires attention to detail, the ability to work in a fast-paced environment, and a commitment to teamwork and continuous improvement.
Key ResponsibilitiesDevelop a working knowledge of production schedules and learn to read and follow schedule instructions.
Form and assemble cases to meet production requirements and specifications.
Monitor auto-filled bags or trays for required fill weight, back seal, end seal, label placement, date code, and label accuracy.
Report deviations from product requirements to operators or supervisors. Ensure cases enter the case sealer correctly.
Visually inspect products and ingredients for blemishes, flaws, extraneous material, or discoloration.
Stop production and report any serious deviation from requirements or equipment malfunction.
Maintain housekeeping in the work area.
Assist operators with start-up, production, changeover, and shutdown activities.
Perform other duties as assigned by management.
Ability to meet physical requirements to perform all duties safely.
Effective communication skills to perform all duties.
Willingness to learn and follow:
Food handling and packaging practices
Safe working practices
Good Manufacturing Practices (GMP)
Ability to work well as part of a production team.
Reliable and consistent attendance with strong attention to duties.
Ability to work accurately with minimal supervision.
Our Benefits
We care about your total well-being and will support you with the following, subject to your location and role:
Health: Medical, dental and vision insurance, company-paid life, accident and disability insurance
Wealth: Great pay, 401(k)/pension eligibility, financial wellness programs and stock purchase plan
Growth: Career development opportunities, employee resource groups and team collaboration
Balance: Paid-time off and volunteer opportunities
Our Company
At Conagra Brands, we have a rich heritage of making great food. We aspire to have the most impactful, energized and inclusive culture in food. As a member of our 18,000+ person team across 40+ locations, you are empowered to reach your potential, make an impact and own your career. We're in the business of building champions within our people and our iconic brands like Birds Eye, Slim Jim and Reddi-Wip.
Our focus on innovation extends beyond making great food, it also reflects our commitment to embracing new solutions that positively impact our team, the communities we serve and the health of our planet. Foodies Welcome.
Conagra Brands is an equal opportunity employer and considers qualified applicants for employment without regard to sex, race, color, religion, ethnic or national origin, gender, sexual orientation, gender identity or expression, age, pregnancy, leave status, disability, veteran status, genetic information and/or any other characteristic or status protected by national, federal, state or local law. Reasonable accommodation may be made upon request.
Not Specified
K
Production Manager - Metal Fabrication
Salary not disclosed
Korn Ferry has partnered with a leading North American provider of engineering, fabrication, and installation services for large steel structures & heavy steel building components to identify a Production Manager to join their dynamic team.
This position is highly visible, reporting directly to the General Manager, and will be overseeing all aspects of the structural steel production process in the facility. The Production Manager will play a pivotal part in continually improving production processes, reducing costs, and enhancing productivity.
Responsibilities and Expectations
- Oversee all aspects of structural steel production from planning to execution.
- Manage and supervise the production team to ensure targets are met.
- Demonstrate sound judgment in prioritizing tasks, evaluating staffing needs, and assigning duties to ensure efficient team operations.
- Develop and implement production schedules and workflows within budgetary and time constraints to optimize resource utilization and overall performance.
- Monitor and maintain production quality standards and compliance with safety regulations.
Requirements
- Bachelor’s degree in Engineering, Construction Management, or a related field preferred.
- Proven experience in structural steel fabrication and production management.
- Strong leadership skills with the ability to motivate and manage a diverse team.
- Excellent communication and interpersonal skills.
- In-depth knowledge of safety regulations and quality control standards in manufacturing.
- Knowledge of AISC, AWS, and CWB codes and standards.
SE: 510764464
Not Specified
Production Machinist / Assembler 2nd Shift
🏢 Boeing
$33.32
Job Description
At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.
Boeing Test and Evaluation (BT&E) is seeking multiple Machinist Assemblers Precision to join our Machinist departments in either Seattle, WA or Tukwila, WA .
Machinists in this position participate in the design, fabrication and assembly of various production and research projects. Using a variety of precision machines (e.g., lathes, grinders, EDM, CNC and milling machines) to support aircraft engineering and production groups.
Position Responsibilities:
Perform bench work (e.g., drilling, honing, tapping, reaming) on production and experimental parts, as required
Assemble parts using rivets and bolts with correct tools such as rivet squeeze, lock bolt puller, rivet gun and bucking bar, power screwdriver, or ratchet per engineering requirements
Lay-out, plan and sequence machining operation
Analyze and interpret drawings, sketches, blueprints and verbal instructions to determine work to be performed on detailed precision parts (e.g., aircraft castings, fixtures, tools, shop aids)
Use shop math, geometry and/or trig to calculate dimensions
Determine/obtain raw material to be used (e.g., brass, aluminum, steel, composites, and wood) for machining or fabrication per drawing or customer requirements
Set up operate and adjust all common machine tools (e.g., lathe, mill, bridgeport, electrical discharge machine (EDM), drill press) to accomplish work on precision assemblies
Select machine to be used in machining process
Check machine to be used for missing, loose, damaged equipment, check oil and coolant levels and fill, as required
Write programs as required for multi axis machines
Adjust machine settings (e.g., speeds and feeds) to correct machining problems or to prepare machine for next operation in sequence
Perform minor editing of CNC programs per shop requirements
Select and check cutting tools per program or CNC documents
Ensure cutters are the correct type, length, diameter, radius, and are in good condition
Select machine accessories and holding devises (e.g., chucks, vises, turntables)
Verify that apparatus is in good condition
Identify fixtures and/or shop aids to be built and fabricate as required using mill, lathe, bandsaw, drill press, sander and grinder
Attach machine accessories, tools and shop aides using dial indicators, edge finders, wrenches, bolts, clamps, and overhead cranes
Monitor machine during operation for unusual vibration or sounds, watch machine gauges and controller display or digital readout for warnings, visually check cutter path, clearance and chips to ensure smooth operation
Check work with precision instruments (e.g., micrometers, dial indicators, height gauges) and ensure parts are free from defects (e.g., finish, dimensions, mismatch, tool marks) and complete per drawing, sketch or verbal instructions
Assemble, fit, check, test of developmental machine parts and assemblies to customer specification
Troubleshoot and test precision assemblies with working groups (e.g., engineering, production, inspection, manufacturing resource & development (MRD)) to resolve tooling/production problems
Handle and dispose of hazardous materials (e.g., coolants, solvents) in approved manner (per Material Safety Data Sheets) using personal protective equipment, as required
Maintain personal tool certifications, as required
Ability to use computers and knowledge and ability to use MSWord, Excel, Outlook, etc.
Must be willing to work variable shifts, including weekends and overtime; some positions may also be rotating shifts
This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.
This position must meet export control compliance requirements. To meet export control compliance requirements, a “U.S. Person” as defined by 22 C.F.R. §120.15 is required. “U.S. Person” includes U.S. Citizen, lawful permanent resident, refugee, or asylee.
Basic Qualifications (Required Skills/Experience):
~1+ years of experience with multiple Computer-Aided Design (CAD) and/or Computer-Aided Manufacturing (CAM) applications (e.g. Mastercam, CATIA V5, Unigraphics, etc.)
~1+ years of experience programing, setting-up and running lathes, grinders, mills, and Computer Numerical Control (CNC) machines
~ Experience reading G and M codes
Preferred Qualifications (Desired Skills/Experience):
Experience with ENOVIA design tool
Completed training as a journeyman machinist
Graduated from an Machinist Apprenticeship program or completed a Machining Certificate
Drug Free Workplace :
Boeing is a Drug Free Workplace (DFW) where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.
Shift:
These positions are for either 1st or 2nd shift; however, there may be additional shift requirements to support program objectives.
Union:
This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.
Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will be considered as this job is not installed in QTTP.
Pay & Benefits:
At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.
The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.
The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.
Pay is based upon candidate experience and qualifications, as well as market and business considerations.
Summary Pay Range: $33.32/hour to start for new union members, with potential to earn up to $61.01/hour, at max pay
Applications for this position will be accepted until Mar. 21, 2026
Relocation
Relocation assistance is not a negotiable benefit for this position.
Visa Sponsorship
Employer will not sponsor applicants for employment visa status.
Shift
This position is for variable shift
Equal Opportunity Employer:
Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.
Boeing Test and Evaluation (BT&E) is seeking multiple Machinist Assemblers Precision to join our Machinist departments in either Seattle, WA or Tukwila, WA .
Machinists in this position participate in the design, fabrication and assembly of various production and research projects. Using a variety of precision machines (e.g., lathes, grinders, EDM, CNC and milling machines) to support aircraft engineering and production groups.
Position Responsibilities:
Perform bench work (e.g., drilling, honing, tapping, reaming) on production and experimental parts, as required
Assemble parts using rivets and bolts with correct tools such as rivet squeeze, lock bolt puller, rivet gun and bucking bar, power screwdriver, or ratchet per engineering requirements
Lay-out, plan and sequence machining operation
Analyze and interpret drawings, sketches, blueprints and verbal instructions to determine work to be performed on detailed precision parts (e.g., aircraft castings, fixtures, tools, shop aids)
Use shop math, geometry and/or trig to calculate dimensions
Determine/obtain raw material to be used (e.g., brass, aluminum, steel, composites, and wood) for machining or fabrication per drawing or customer requirements
Set up operate and adjust all common machine tools (e.g., lathe, mill, bridgeport, electrical discharge machine (EDM), drill press) to accomplish work on precision assemblies
Select machine to be used in machining process
Check machine to be used for missing, loose, damaged equipment, check oil and coolant levels and fill, as required
Write programs as required for multi axis machines
Adjust machine settings (e.g., speeds and feeds) to correct machining problems or to prepare machine for next operation in sequence
Perform minor editing of CNC programs per shop requirements
Select and check cutting tools per program or CNC documents
Ensure cutters are the correct type, length, diameter, radius, and are in good condition
Select machine accessories and holding devises (e.g., chucks, vises, turntables)
Verify that apparatus is in good condition
Identify fixtures and/or shop aids to be built and fabricate as required using mill, lathe, bandsaw, drill press, sander and grinder
Attach machine accessories, tools and shop aides using dial indicators, edge finders, wrenches, bolts, clamps, and overhead cranes
Monitor machine during operation for unusual vibration or sounds, watch machine gauges and controller display or digital readout for warnings, visually check cutter path, clearance and chips to ensure smooth operation
Check work with precision instruments (e.g., micrometers, dial indicators, height gauges) and ensure parts are free from defects (e.g., finish, dimensions, mismatch, tool marks) and complete per drawing, sketch or verbal instructions
Assemble, fit, check, test of developmental machine parts and assemblies to customer specification
Troubleshoot and test precision assemblies with working groups (e.g., engineering, production, inspection, manufacturing resource & development (MRD)) to resolve tooling/production problems
Handle and dispose of hazardous materials (e.g., coolants, solvents) in approved manner (per Material Safety Data Sheets) using personal protective equipment, as required
Maintain personal tool certifications, as required
Ability to use computers and knowledge and ability to use MSWord, Excel, Outlook, etc.
Must be willing to work variable shifts, including weekends and overtime; some positions may also be rotating shifts
This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.
This position must meet export control compliance requirements. To meet export control compliance requirements, a “U.S. Person” as defined by 22 C.F.R. §120.15 is required. “U.S. Person” includes U.S. Citizen, lawful permanent resident, refugee, or asylee.
Basic Qualifications (Required Skills/Experience):
~1+ years of experience with multiple Computer-Aided Design (CAD) and/or Computer-Aided Manufacturing (CAM) applications (e.g. Mastercam, CATIA V5, Unigraphics, etc.)
~1+ years of experience programing, setting-up and running lathes, grinders, mills, and Computer Numerical Control (CNC) machines
~ Experience reading G and M codes
Preferred Qualifications (Desired Skills/Experience):
Experience with ENOVIA design tool
Completed training as a journeyman machinist
Graduated from an Machinist Apprenticeship program or completed a Machining Certificate
Drug Free Workplace :
Boeing is a Drug Free Workplace (DFW) where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.
Shift:
These positions are for either 1st or 2nd shift; however, there may be additional shift requirements to support program objectives.
Union:
This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.
Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will be considered as this job is not installed in QTTP.
Pay & Benefits:
At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.
The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.
The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.
Pay is based upon candidate experience and qualifications, as well as market and business considerations.
Summary Pay Range: $33.32/hour to start for new union members, with potential to earn up to $61.01/hour, at max pay
Applications for this position will be accepted until Mar. 21, 2026
Relocation
Relocation assistance is not a negotiable benefit for this position.
Visa Sponsorship
Employer will not sponsor applicants for employment visa status.
Shift
This position is for variable shift
Equal Opportunity Employer:
Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
permanent
jobs by
✓ All jobs loaded