Primefaces Selectonemenu Filter Function Example Jobs in Usa
8,227 positions found — Page 7
- 59/hr Duties: These will be for 787, 737, 777, and unclassified defense.
Assemble, install, seal, rig, inspect, and complete precision and other structural and system components, working from drawings, documents, process specifications, quality control requirements, and established processes and procedures.
Functional test and correct, fit form and function of assemblies and components.
1.
Obtain required information from prints, charts, sketches, work instructions, documents, verbal and electronic information.
2.
Use shop mathematics and precision measuring and or test instruments to complete work assignments and functional test assemblies andcomponents.
3.
Utilize tooling in the assembly of components into sub-assemblies or end items.
4.
Verify work performed is per work instructions and meets process and/or engineering specification.
Identify discrepancies found per applicable procedure.
5.
Ensure equipment and tool certification occurs per procedure.
6.
Perform routine minor machine maintenance as part of their daily work duties (e.g., where applicable, replacing machine filters, changing standard light bulbs on machines and equipment, maintaining lubrication/coolant levels, etc.
as related to basic Total Preventative Maintenance duties).
7.
Routinely move product within the immediate manufacturing work area, including across isle, using shop assigned equipment as required, and complete transactions necessary to move product to the next operation.
On an exception basis, move product to the next operation within a building.
8.
Perform work within allotted schedules.
9.
Support the continuous flow of product within the manufacturing process by training and assisting employees at all classificationlevels.
10.
Assist in the training of other assembly personnel in assembly, installation and inspections techniques.
11.
Cross trains in inspection and becomes SIA qualified.
Level Setup and operate conventional and/or Computerized Numerical Controlled (CNC) and fastening equipment of less than simultaneous 3-axis movement.
Activities include, e.g.
drive Matic processes, etc., or the employee must have the skill and knowledge to perform in one or more of the specialties listed below: Assembly/Installation of Structures Sealer Sub Assembly Additionally, the employee must have the skill and knowledge to performance or more of the specialty skills listed below: Assembly/Installation Doors Integral Fuel Cell Sealing Precision Bench Assembly Pressure and vacuum testing.
The first week of training will occur on second shift After training, the Hours will be 7:18am
- 3:48pm all overtime will be pre-shift starting at 5:18am.
They will be working overtime.
Install, assemble, inspect, drawings, Seal, Documents, process specifications, rig, complete precision, structural and system components, quality control requirements
Date Posted:
2026-02-13Country:
United States of AmericaLocation:
US-AZ-TUCSON-M10 ~ 3360 E Hemisphere Loop ~ BLDG M10Position Role Type:
OnsiteU.S. Citizen, U.S. Person, or Immigration Status Requirements:
The ability to obtain and maintain a U.S. government issued security clearance is required. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearanceSecurity Clearance Type:
DoD Clearance: SecretSecurity Clearance Status:
Active and existing security clearance required after day 1At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world.
Raytheon is seeking a Senior Electrical Engineer to join our team as an Electrical Computer Aided Designer Engineer (ECAD).Our Mission is to develop best in industry technologies that align product capabilities to the needs of our customer. We will empower our people to leverage design commonality and innovation, balancing risk and rigor, to achieve predictable and affordable solutions. We are looking for candidates willing to collaborate, innovate, and team with our engineers to generate and utilize today’s cutting-edge technology.
This position is an onsite role, located in Tucson, AZ.
What You Will Do:
Responsible for Printed Circuit Board (PCB) designs from conception to manufacturing
Creation of the PCB, Circuit Card Assembly (CCA), and Schematic drawings for suppliers
Schematic Capture, Component Placement, Routing of Traces, Gerber/ODB++ file creation
Utilize software such as Siemens: Xpedition Enterprise and DownStream Technologies: BluePrint-PCB
Design layouts include Rigid, Flex, and Rigid-Flex assemblies
Work designs to include full designs, re-spins, drawing updates, change notices, copper changes, and process improvement projects within and outside own discipline
Daily interface with various engineering levels along with different engineering disciplines including, but not limited to Electrical, Mechanical, Components, Test, and Producibility Engineering disciplines to ensure that the overall design requirements are captured, keeping cost, cycle time, and producibility in mind
Qualifications You Must Have:
Typically requires a Bachelor’s in Science, Technology, Engineering, or Mathematics (STEM) and a minimum of 5 years of prior relevant experience to include any combination of the following:
Experience with PCB manufacturing or CCA manufacturing principles that affect circuitry and component layout with RF specific layout techniques
Experience with the electrical design process including RF layout
Experience with laying out Rigid, Flex, or Rigid-Flex boards
Experience with multi-layer board design
Qualifications We Prefer:
Working knowledge of Analog, Digital including DDR, specific experience with RF, Power, and mixed technology, including multi-layer designs with High Density Interconnect (HDI) technology
Technical PCB design skills using the Siemens design toolset including, but not limited to the Xpedition Layout tool suite with working knowledge of schematic capture, placement, routing, use of the auto-router, constraint manager, and library tools, and use of BluePrint to create complex PCB and CCA drawings, Altium is not used, but transfers over well to the Siemens toolset
Export manufacturing data in both Gerber and ODB++ formats
Use of Valor NPI, Design for Manufacturing rule sets, other Design Rule Checking software
Able to understand and interpret drawings as they relate to PCB’s and CCA’s
Familiarity with IPC 6012 & IPC 6013
Working knowledge of military and commercial design standards, GD&T techniques, and overall producibility considerations related to electronic packaging
Knowledge of RF circuitry and key care abouts when it come to laying out the board along with filter knowledge
Working knowledge of operating system concepts and implementations, network services as related to Microsoft Windows suites
Willingness to work extended hours (nights and/or weekends) as required to complete assigned tasking
Active Secret DoD security clearance
What We Offer
Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Trust, Respect, Accountability, Collaboration, and Innovation.
This position offers relocation based on candidate eligibility.
Learn More & Apply Now!
This position requires a security clearance. DCSA Consolidated Adjudication Services (DCSA CAS), an agency of the Department of Defense, handles and adjudicates the security clearance process. More information about Security Clearances can be found on the US Department of State government website here:
#LI-CV1
As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.
The salary range for this role is 86,800 USD - 165,200 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate’s work experience, location, education/training, and key skills. Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement. Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company’s performance. This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply. RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window.RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.
Privacy Policy and Terms:
Click on this link to read the Policy and Terms
Date Posted:
2026-02-13Country:
United States of AmericaLocation:
US-AZ-TUCSON-M10 ~ 3360 E Hemisphere Loop ~ BLDG M10Position Role Type:
OnsiteU.S. Citizen, U.S. Person, or Immigration Status Requirements:
The ability to obtain and maintain a U.S. government issued security clearance is required. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearanceSecurity Clearance Type:
DoD Clearance: SecretSecurity Clearance Status:
Active and existing security clearance required after day 1At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world.
Raytheon is seeking a Senior Electrical Engineer to join our team as an Electrical Computer Aided Designer Engineer (ECAD).Our Mission is to develop best in industry technologies that align product capabilities to the needs of our customer. We will empower our people to leverage design commonality and innovation, balancing risk and rigor, to achieve predictable and affordable solutions. We are looking for candidates willing to collaborate, innovate, and team with our engineers to generate and utilize today’s cutting-edge technology.
This position is an onsite role, located in Tucson, AZ.
What You Will Do:
Responsible for Printed Circuit Board (PCB) designs from conception to manufacturing
Creation of the PCB, Circuit Card Assembly (CCA), and Schematic drawings for suppliers
Schematic Capture, Component Placement, Routing of Traces, Gerber/ODB++ file creation
Utilize software such as Siemens: Xpedition Enterprise and DownStream Technologies: BluePrint-PCB
Design layouts include Rigid, Flex, and Rigid-Flex assemblies
Work designs to include full designs, re-spins, drawing updates, change notices, copper changes, and process improvement projects within and outside own discipline
Daily interface with various engineering levels along with different engineering disciplines including, but not limited to Electrical, Mechanical, Components, Test, and Producibility Engineering disciplines to ensure that the overall design requirements are captured, keeping cost, cycle time, and producibility in mind
Qualifications You Must Have:
Typically requires a Bachelor’s in Science, Technology, Engineering, or Mathematics (STEM) and a minimum of 5 years of prior relevant experience to include any combination of the following:
Experience with PCB manufacturing or CCA manufacturing principles that affect circuitry and component layout with RF specific layout techniques
Experience with the electrical design process including RF layout
Experience with laying out Rigid, Flex, or Rigid-Flex boards
Experience with multi-layer board design
Qualifications We Prefer:
Working knowledge of Analog, Digital including DDR, specific experience with RF, Power, and mixed technology, including multi-layer designs with High Density Interconnect (HDI) technology
Technical PCB design skills using the Siemens design toolset including, but not limited to the Xpedition Layout tool suite with working knowledge of schematic capture, placement, routing, use of the auto-router, constraint manager, and library tools, and use of BluePrint to create complex PCB and CCA drawings, Altium is not used, but transfers over well to the Siemens toolset
Export manufacturing data in both Gerber and ODB++ formats
Use of Valor NPI, Design for Manufacturing rule sets, other Design Rule Checking software
Able to understand and interpret drawings as they relate to PCB’s and CCA’s
Familiarity with IPC 6012 & IPC 6013
Working knowledge of military and commercial design standards, GD&T techniques, and overall producibility considerations related to electronic packaging
Knowledge of RF circuitry and key care abouts when it come to laying out the board along with filter knowledge
Working knowledge of operating system concepts and implementations, network services as related to Microsoft Windows suites
Willingness to work extended hours (nights and/or weekends) as required to complete assigned tasking
Active Secret DoD security clearance
What We Offer
Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Trust, Respect, Accountability, Collaboration, and Innovation.
This position offers relocation based on candidate eligibility.
Learn More & Apply Now!
This position requires a security clearance. DCSA Consolidated Adjudication Services (DCSA CAS), an agency of the Department of Defense, handles and adjudicates the security clearance process. More information about Security Clearances can be found on the US Department of State government website here:
#LI-CV1
As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.
The salary range for this role is 86,800 USD - 165,200 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate’s work experience, location, education/training, and key skills. Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement. Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company’s performance. This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply. RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window.RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.
Privacy Policy and Terms:
Click on this link to read the Policy and Terms
Ragsdale Heating, Air, & Plumbing is cu rrently seeking HVAC Installers to join our team comprised of creative and energetic employees, who are dedicated to delivering the best customer service experience every day. Our Installers serve the customers by educating them on the available product options, removing and replacing HVAC equipment as well as installing add-on accessories when needed while providing quality work while following all applicable local and national codes. The role will serve as a mentor and coach to both apprentice and entry-level technicians.
What's In It For Me?
- Market Value Compensation (Average $75,000-$100,00+/year)
- Robust PTO Plan
- Health, Vision and Dental plans for you and your family to choose from
- 401K Retirement Plan with company match up to 30%
- Life Insurance, Short-Term, and Long-Term Disability
- Special Program Options: FSA, EAP, Legal Services, and Identity Theft
- Continuous Training for your Professional Development
- Working in a dynamic, collaborative, and fun environment
What Will I Do?
- Install/Replace HVAC equipment including, but not limited to: ductwork, attic and/or vertical splits (gas or heat pump), rooftop package units (gas or heat pump)
- Maintain good working order of company vehicle
- Maintain proper stock, parts, tools, and safety equipment in the vehicle.
- Travel to job sites in the service area, and work with dispatch to ensure schedule is maintained and delays are properly communicated to the customer
- Design Duct Systems for Optimal Comfort and Efficiency
- Engage in conversation with the homeowner to uncover any concern or interests regarding their AC system which could lead to potential accessory sales or a new system replacement
- Understand company pricing program and generate appropriate customer invoices and other paperwork at the job site and electronically process credit card payments
- Participate in company-provided training opportunities on customer service and the latest industry technologies.
- Work with apprentices and entry-level installers to coach and mentor
Do I have What it Takes?
- 2+ years experience with knowledge in refrigeration function and theory, the ability to diagnose and perform replacement of HVAC related components such as Air Conditioners & Heat Pumps, Furnaces & Air Handlers, Duct Work & Zone Systems, Thermostats, Air Filters/filtration Systems, Low and high voltage wiring
- Type II EPA Certification
- Excellent customer service skills with a strong desire to exceed customer expectations
- Minimum Tool Requirements: Basic Hand Tools- wrenches, screwdriver/nut drives, sheet metal/duct tools, and hammer.
- Minimum Testing Equipment usage: Refrigerant Gauges, Manometer, Magnahelic, C/O Detector, Psychrometer, and Micron Gauge
- Working knowledge of city codes
- Ability to work independently in a timely manner, making sure job is done correctly the first time
- Ability to crawl in tight places and climb ladders; work in attics, garages, crawl spaces, and on roofs
- Service Titan experience preferred .
Wrench Group and its affiliates are proud to be an Equal Employment Opportunity employer. We do not discriminate based upon race, religion, color, national origin, gender (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender identity, gender expression, genetic information, age, status as a protected veteran, status as an individual with a disability, or other applicable legally protected characteristics. The company encourages all qualified candidates who are eligible to work in the United States to apply, but it does not sponsor applicants or employees who require a visa to work legally.
$19/Hour
Want to make something truly special? Join Ardent Mills, the premier flour-milling and ingredients company. With us, you can make products that exceed customer expectations. Make communities healthier and more prosperous. Make the innovative breakthroughs that shape our industry. Make the food that nourishes people throughout North America.
The Role:
- The Sanitation Utility will follow the Ardent Mills core values of Trust, Serving, Simplicity and Safety
- The Sanitation Utility is responsible for general sanitation duties including the disassembly, cleaning/sanitation and reassembly of processing equipment
- Must be able to work in various conditions and different heights
- Must be able to read, follow and retain detailed instructions for numerous different tasks and maintain records according to instructions
- Must be mindful at all times of personal safety and the safety of those working in the same area and adhere to all safety rules at all times
- Must keep food safety in mind at all times while performing cleaning procedures
- Able to cross-train for assistance in other departments as needed
Principal Accountabilities:
- General labor performing tasks such as vacuuming, brushing, sweeping, scraping, scrubbing and washing of floors, walls, racks and equipment.
- Process equipment cleaning. Break down and re-assemble.
- Fill out accurate and detailed paperwork
- Light maintenance activities involving rollstands, filters, sifters, and other processing equipment.
- Other duties as assigned.
Essential Functions/Requirements:
- Work will be done primarily in a plant atmosphere.
- Lifting, pushing, and pulling up to 50 lbs. is required
- Able to perform physical labor of cleaning and to work all day on feet on both dry and wet surfaces
- Able to work efficiently while being cautious and careful not to create hazards which could endanger self or others
- Good work ethic with high personal standards for cleanliness
- Alert and willing to learn a wide variety of cleaning tasks
Education:
High School Diploma or GED
Skills:
- Strong verbal and written communication skills
- Moderate level of mechanical skills
- Possess curiosity and always look for ways to improve procedures
- Flexibility regarding work hours
- Able to occasionally be involved on different shifts
Physical Requirements and Working Conditions (with or without reasonable accommodation):?
- Ability to wear personal protective equipment (PPE) as is required by the operating areas (i.e. safety glasses, protective footwear, hearing protection and, at times, a respirator)?
- Ability to work a rotating schedule including nights, weekends and holidays?
- Ability to work a machine paced continuous process that operates 24 hours a day, 7 days a week with conditions which include:?
- Heat/Cold temperatures (inclement weather)?
- Indoor/Outdoor environment?
- Dusty environment?
- Noisy environment?
- Frequent moving/vibration/ or other motion of equipment/processes?
- Elevated Places?
Must pass a physical abilities test?with or without reasonable accommodation with the ability to:?
- Frequently stand, walk, rotate,?bend/stoop, twist, crouch, kneel, balance and reach?or lift at shoulder level,?above shoulder level,?and below shoulder level?
- Frequently?climb stairs and/or ladders?
- Occasionally lift up-to?55?pounds?
- Pull a maximum force of 210 ft./lbs.
Team members must be clean shaven in order to perform tasks where respiratory protection is required and the use of a respirator (including N-95 dust mask) requires a proper seal for adequate protection.
Location: Wichita KS
Address: 715 East 13th Street, Wichita KS, 67214
Employment Type: Full time
Competitive Compensation:
We provide market-driven base pay, based on skills, abilities, and level of experiences. Our salary ranges are broad, and individual salary will be market competitive based on a candidate's unique set of skills and level of experience. The starting range for this position is $15.70 - $20.91, with additional earning potential possible commensurate with experience. Additionally, we believe that our team members are the reason for our success and all team members are incentive eligible with a target based on contribution, company performance, and individual results achieved. While the specific bonus plan and target amount will be determined based on the role and breadth of contributions, the targeted bonus plan and targeted percentage amount for this role is Bonus - OIP, 5% Annual.
Benefits:
At Ardent Mills we offer a wide range of benefits to our team members and their eligible family members. Some of our great benefit programs you may be eligible for include: Medical, Dental and Vision Coverage Health and Dependent Savings Accounts Life and Disability Programs Voluntary Benefit Programs Company Sponsored Wellness Programs Retirement Savings with Company Match Team Member and Family Assistance Program (EAP) Paid Time Off and Paid Holidays Employee Recognition Program with Rewards (RAVE).
Application Deadline:
EEO Commitment:
At Ardent Mills, everyone matters and everyone has a voice. We are committed to providing an environment of mutual respect where equal opportunities are available to all applicants and team members and the decisions will be based on merit, competence, performance, and business needs. We are proud to be an equal opportunity employer. We do not discriminate on the basis of race, color, religion, creed, national origin, ancestry, marital status, sex, sexual orientation, gender identity or expression, physical or mental disability, pregnancy, genetic information, veteran status, age, political affiliation, or any other non-merit characteristic protected by law or not. Together, celebrating our differences, we make Ardent Mills.
Recruitment Fraud Disclaimer:
At Ardent Mills, the security of our employees and candidates is a priority. We will never request sensitive information such as your bank account information, social security number, or other non-publicly available information during the application and interview process. If someone asks you for sensitive information, we strongly advise that you assume that individual is not affiliated with Ardent Mills. Some things to watch out for:
- Slightly altered or unprofessional email addresses. Ardent Mills' Recruitment team only corresponds from email addresses with the domain or .
- Vague job requirements or job descriptions. Our open job opportunities and descriptions can be found at .
S. government issued security clearance is required prior to start date. S. citizens are eligible for a security clearance Security Clearance Type:
Secret Security Clearance Status:
Ability to obtain INTERIM U.S. government issued security clearance is required prior to start date
At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Effector RF Design Department is responsible for designing RF and Microwave hardware, including transmitters, receivers, and exciters. This includes design and test activities that span preliminary design to integration. Products we develop support radar and datalink applications on a variety of tactical missile programs. Critical to this role is designing for challenging mechanical constraints and extreme environments.
Design and development of transmitters, receivers or exciters
Design of circuit card assemblies (CCAs) with RF or mixed signals
Partner with interdisciplinary teams - power, digital, mechanical, etc.
Typically requires a Bachelor’s in Science, Technology, Engineering, or Mathematics (STEM) and a minimum of eight years of prior relevant experience to include any combination of the following:
Experience with RF design and fabrication
Experience with RF testing and troubleshooting
High Frequency Structure Simulator (HFSS) or equivalent
Advanced Design System (ADS) or equivalent
Mentorship or apprenticeship experience
Working across domains on complex projects
Team leadership experience on technical projects including experience w/ cost and schedule
Includes yield and margin analysis
Cascade analysis and/or frequency planning
Filter design and fabrication
Circuit card assembly design and fabrication
Testing or designing RF hybrid (chip and wire) technologies
High speed data converter test/characterization
High power RF design or test experience
Scripting experience (Matlab or Python)
~ Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. This position offers relocation based on candidate eligibility.
This position requires a security clearance. DCSA Consolidated Adjudication Services (DCSA CAS), an agency of the Department of Defense, handles and adjudicates the security clearance process. More information about Security Clearances can be found on the US Department of State government website here:
As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.
RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate’s work experience, location, education/training, and key skills.
Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement.
Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company’s performance.
S. territory, the appropriate pay structure and benefits will apply.
RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window.
All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.
Privacy Policy and Terms:
Click on this link to read the Policy and Terms
S. government issued security clearance is required prior to start date. S. citizens are eligible for a security clearance Security Clearance Type:
Secret Security Clearance Status:
Ability to obtain INTERIM U.S. government issued security clearance is required prior to start date
At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Effector RF Design Department is responsible for designing RF and Microwave hardware, including transmitters, receivers, and exciters. This includes design and test activities that span preliminary design to integration. Products we develop support radar and datalink applications on a variety of tactical missile programs. Critical to this role is designing for challenging mechanical constraints and extreme environments.
Design and development of transmitters, receivers or exciters
Design of circuit card assemblies (CCAs) with RF or mixed signals
Partner with interdisciplinary teams - power, digital, mechanical, etc.
Typically requires a Bachelor’s in Science, Technology, Engineering, or Mathematics (STEM) and a minimum of eight years of prior relevant experience to include any combination of the following:
Experience with RF design and fabrication
Experience with RF testing and troubleshooting
High Frequency Structure Simulator (HFSS) or equivalent
Advanced Design System (ADS) or equivalent
Mentorship or apprenticeship experience
Working across domains on complex projects
Team leadership experience on technical projects including experience w/ cost and schedule
Includes yield and margin analysis
Cascade analysis and/or frequency planning
Filter design and fabrication
Circuit card assembly design and fabrication
Testing or designing RF hybrid (chip and wire) technologies
High speed data converter test/characterization
High power RF design or test experience
Scripting experience (Matlab or Python)
~ Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. This position offers relocation based on candidate eligibility.
This position requires a security clearance. DCSA Consolidated Adjudication Services (DCSA CAS), an agency of the Department of Defense, handles and adjudicates the security clearance process. More information about Security Clearances can be found on the US Department of State government website here:
As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.
RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate’s work experience, location, education/training, and key skills.
Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement.
Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company’s performance.
S. territory, the appropriate pay structure and benefits will apply.
RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window.
All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.
Privacy Policy and Terms:
Click on this link to read the Policy and Terms
Date Posted:
2026-02-26Country:
United States of AmericaLocation:
US-AZ-TUCSON-M02 ~ 1151 E Hermans Rd ~ BLDG M02Position Role Type:
OnsiteU.S. Citizen, U.S. Person, or Immigration Status Requirements:
Active and transferable U.S. government issued security clearance is required prior to start date. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearanceSecurity Clearance Type:
DoD Clearance: SecretSecurity Clearance Status:
Ability to obtain INTERIM U.S. government issued security clearance is required prior to start dateAt Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world.
Effector RF Design Department is responsible for designing RF and Microwave hardware, including transmitters, receivers, and exciters. This includes design and test activities that span preliminary design to integration. Products we develop support radar and datalink applications on a variety of tactical missile programs. Critical to this role is designing for challenging mechanical constraints and extreme environments.
This position is an onsite role, located in Tucson, AZ.
What You Will Do
- Design and development of transmitters, receivers or exciters
- Design of circuit card assemblies (CCAs) with RF or mixed signals
- Work in a lab to accomplish component characterization as well as module verification and integration
- Test and handle sensitive RF Hardware
- Schematic capture and RF routing
- Partner with interdisciplinary teams - power, digital, mechanical, etc.
Qualifications You Must Have
- Typically requires a Bachelor’s in Science, Technology, Engineering, or Mathematics (STEM) and a minimum of eight years of prior relevant experience to include any combination of the following:
- Experience with RF design and fabrication
- Experience with RF testing and troubleshooting
- Experience with the simulation of RF products
- Experience with any of the following tools:
- Mentor DX Designer or equivalent
- High Frequency Structure Simulator (HFSS) or equivalent
- SystemVue/Genesys or equivalent
- Advanced Design System (ADS) or equivalent
Qualifications We Prefer
- Mentorship or apprenticeship experience
- Technical oversight responsibilities for less-senior engineers
- Working across domains on complex projects
- Architecting and requirements definition for complex RF products
- Team leadership experience on technical projects including experience w/ cost and schedule
- EVMS or CAM experience
- Ability to prepare documentation with minimal oversight
- Background in designing for manufacturability, producibility, and cost constraints. Includes yield and margin analysis
- Technical background in the following areas:
- Cascade analysis and/or frequency planning
- Filter design and fabrication
- Circuit card assembly design and fabrication
- Testing or designing RF hybrid (chip and wire) technologies
- High speed data converter test/characterization
- High power RF design or test experience
- Scripting experience (Matlab or Python)
- Some front line leadership desirable
What We Offer
Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Trust, Respect, Accountability, Collaboration, and Innovation.
This position offers relocation based on candidate eligibility.
Learn More & Apply Now!
This position requires a security clearance. DCSA Consolidated Adjudication Services (DCSA CAS), an agency of the Department of Defense, handles and adjudicates the security clearance process. More information about Security Clearances can be found on the US Department of State government website here:
As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.
The salary range for this role is 107,500 USD - 204,500 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate’s work experience, location, education/training, and key skills. Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement. Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company’s performance. This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply. RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window.RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.
Privacy Policy and Terms:
Click on this link to read the Policy and Terms
Date Posted:
2026-03-06Country:
United States of AmericaLocation:
US-AZ-TUCSON-805 ~ 1151 E Hermans Rd ~ BLDG 805Position Role Type:
OnsiteU.S. Citizen, U.S. Person, or Immigration Status Requirements:
Active and transferable U.S. government issued security clearance is required prior to start date. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearanceSecurity Clearance Type:
DoD Clearance: SecretSecurity Clearance Status:
Active and existing security clearance required on day 1At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world.
The Systems Effectors: Processing, Guidance & Control Center is responsible for algorithm development including Guidance, Navigation, and Control; radio frequency (RF) and electro-optical/infrared (EO-IR) Signal Processing (SP); and missile- and sensor-level Modeling and Simulation for Raytheons broad portfolio of projects, programs, and products. In the GNC department, we design, integrate, and optimize effector guidance, tracking, navigation, and estimation algorithms to meet mission objectives. We support new business initiatives and help develop & execute technology roadmaps.
The Effectors PG&C Center is currently hiring for a Sr. Systems Engineer - Guidance, Navigation, and Control Engineer position in Tucson, AZ to support execution of the portfolio of current and upcoming missile programs. As a Sr. Systems Engineer - Guidance, Navigation, and Control Engineer , you will play a critical role in helping with the evaluation, design, implementation, and integration of embedded software algorithms. You will collaborate with a team of engineers in an integrated product team that will be responsible for tactical embedded software, firmware, and integrated flight software 6 Degrees-of-Freedom simulations to achieve overall system performance requirements. This position is an onsite role located in Tucson, AZ.
What You Will Do
Development, integration, and testing of embedded tactical missile flight code
Definition and execution of system level performance studies and analyses to inform the development and integration of new capabilities, refinement of existing capability, or to address obsolescence
Work within an agile framework to lead development of backlogs, plans, and metrics
Provide experience and guidance to help the program train new engineers and execute efficiently and effectively
Support missile performance analysis including model development, system optimization, and Monte Carlo assessments with expected system disturbances.
Qualifications You Must Have
Typically requires a Bachelor’s degree in Engineering, Science, Physics, Mathematics, or a related STEM degree and a minimum of 5 years prior relevant experience
GNC, Signal Processing, and/or Modeling / Simulation experience
Engineering experience in missile system applications to include at least one of the following:
Digital and/or modern control systems
Dynamics
Kalman filter design
Monte Carlo analysis
Development and/or simulation of physical systems
Signal processing
Verification and validation
System-level performance assessments
GPS/INS navigation systems, sensors, and algorithms
Assured Positioning, Navigation, and Timing (APNT) systems, sensors, and algorithms for navigation in GPS-degraded environments
Experience with MATLAB, Python, C, C++, and/or Object-Oriented design
Experience with GNC and/or Signal Processing algorithms within a simulation or physical environment
Experience managing or leading others in a technical and/or functional capacity within an engineering environment
Ability to obtain an Interim Secret U.S. government issued Security Clearance is required prior to start date with the ability to obtain special program access after start. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance.
Qualifications We Prefer
Active and current Secret or above level Security Clearance
Advanced Degree in Engineering, Science, Physics, Mathematics, or a related STEM degree with 5 or more years of GNC, Signal Processing, and/or Modeling / Simulation experience
Ability to communicate effectively with internal leadership regarding matters of importance
Ability to balance multiple concurrent priorities with overlapping deadline in an Agile environment
Experience with and demonstrable achievement in systems engineering principals with regards to product development
What We Offer
Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation.
Relocation Eligible - relocation assistance is available for this position
Learn More & Apply Now!
Please consider the following role type definition as you apply for this role . Onsite : Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products.
This position requires onsite work in Tucson, AZ:
As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.
The salary range for this role is 86,800 USD - 165,200 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate’s work experience, location, education/training, and key skills. Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement. Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company’s performance. This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply. RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window.RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.
Privacy Policy and Terms:
Click on this link to read the Policy and Terms
At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.
Boeing Defense, Space & Security's Experimental Systems Group (ESG) is hiring GN&C Engineers across Experienced, Lead, and Senior levels to rapidly prototype, develop, and field novel space and hypersonic capabilities. ESG delivers first-of-kind solutions for customers in a fast-paced, multidisciplinary environment, including the X-37B, the world's first fully autonomous, reusable spaceplane. You will design GN&C algorithms, build high fidelity simulations, implement and test flight software, and support integration and flight test in both atmospheric and space. Career growth opportunities are available for candidates with a passion for spacecraft or aircraft GN&C.
environments.
Key Responsibilities
- Design, implement, and verify guidance, navigation, and control algorithms for spacecraft, re-entry vehicles, and hypersonic/airborne platforms.
- Develop and maintain 6 DOF dynamics simulations and associated analysis tools for mission and performance assessment.
- Implement and validate GN&C flight software (MATLAB/Simulink models and C/C++ prototypes) and integrate with testbeds and avionics.
- Apply astrodynamics and flight mechanics to mission design, novel orbit concepts, and trajectory optimization.
- Apply aerodynamics, atmospheric flight mechanics, and controls knowledge to support the design of re-entry guidance, navigation, and flight control functions.
- Develop powered and unpowered guidance laws and autonomy tools for on orbit and atmospheric operations.
- Support troubleshooting of operational anomalies, functional tests, and service incidents.
- Produce concepts of operations, simulation artifacts, and test procedures to enable rapid iteration from prototype to flight test.
- Collaborate with cross functional teams (systems engineering, avionics, test, and business development) and communicate technical tradeoffs to stakeholders.
- Independently identify inefficiencies, propose solutions, and implement reusable tools and automations.
Basic Qualifications
- Bachelor of Science degree from an accredited course of study in engineering, engineering technology (includes manufacturing engineering technology), chemistry, physics, mathematics, data science, or computer science.
- 3+ years related technical experience or an equivalent combination of education and experience.
- Strong fundamentals in astrodynamics and/or aerodynamics and linear algebra.
- Experience developing simulations and mathematical models for GN&C or related problems.
- Proficiency with MATLAB and Simulink.
- Programming experience in C/C++ or comparable languages sufficient to implement and test GN&C algorithms.
- Ability to work effectively in broad, minimally defined design spaces and to communicate technical results clearly.
Preferred Qualifications
- Degree in aerospace/aeronautical engineering (BS/MS/PhD).
- 5+ years related technical experience or an equivalent combination of education and experience.
- 10+ years related technical experience or an equivalent combination of education and experience.
- Active Tier 5 (T5) Clearance, formerly known as Single Scope Background Investigation (SSBI) is Preferred.
- Experience with spacecraft operations, space environment effects, or hypersonic re entry GN&C.
- Familiarity with state estimation and sensor fusion (e.g., Kalman filters), GPS/INS, or air data systems.
- Background in classical and modern control theory and nonlinear control design.
- Model based development experience and flight test support.
- Prior work on space or hypersonic programs.
Relocation:
This position offers relocation based on candidate eligibility. Note: Basic relocation will be offered for eligible internal candidates
Drug Free Workplace:
Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies .
Pay & Benefits:
At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.
The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.
The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.
Pay is based upon candidate experience and qualifications, as well as market and business considerations.
Summary pay range: Experienced level: $114,750 - $155,250
Summary pay range: Lead level: $138,550 - $187,450
Summary pay range: Senior level: $165,750 - $224,250
Applications for this position will be accepted until Mar. 23, 2026
Education
Bachelor's Degree or Equivalent Required
Relocation
This position offers relocation based on candidate eligibility.
Security Clearance
This position requires the ability to obtain a U.S. Security Clearance for which the U.S. Government requires U.S. Citizenship. A current Tier 5(T5), formerly known as a Single Scope Background Investigation (SSBI) (U.S. Citizenship required) or requires candidate agreed to enter a Continuous Evaluation program Post-Start is required.
Visa Sponsorship
Employer will not sponsor applicants for employment visa status.
Shift
This position is for 1st shift
Equal Opportunity Employer:
Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
