Precision Material Handling Jobs in Usa

Position Purpose:

The CDL A Driver & Crane Operator at SRS Building Products ensures safe, efficient transport and delivery of building materials to job sites. Responsibilities include operating trucks, cranes, and forklifts; performing DOT-compliant inspections; coordinating with rooftop loaders; and maintaining accurate documentation. The role also involves customer interaction and warehouse support to uphold service and safety standards.

Key Responsibilities:

Safely deliver building materials within a 200-mile radius, following DOT regulations and company policies.
Perform pre- and post-trip inspections, operate cranes and forklifts, and coordinate with rooftop loaders to ensure accurate, damage-free deliveries.
Verify inventory, document deliveries with photos, and assess job sites for safety risks.
Provide excellent on-site customer service and support warehouse and yard maintenance.

Direct Manager Direct Reports:

Reports directly to the Assistant Branch Manger or Operations Manager.

Travel Requirements:

This role requires frequent travel within a 200-mile radius for material deliveries, with all trips starting and ending at the home branchensuring drivers return home daily with no overnight stays.

Physical Requirements:

This physically demanding role requires regularly lifting up to 100 pounds and working outdoors in varying weather.
Candidates must safely operate commercial vehicles and cranes, navigate ladders and confined spaces, and tolerate high noise levels.
Routine tasks include driving, material handling, and adhering to all safety regulations.
Reasonable accommodations are available per ADA, and the company is committed to equal opportunity and an inclusive workplace.

Working Conditions:

This fast-paced, field-based role focuses on safe, precise, and on-time delivery of building materials within a 200-mile radius. Drivers return home daily with no overnight stays. Success requires strong organization, communication, and customer interaction to meet delivery deadlines and ensure satisfaction at varied job sites.

Minimum Qualifications:

Valid Class A CDL drivers license
1-2 years of relevant work experience
Crane operator certification
Proficiency in performing routine maintenance and safety checks
Knowledge of basic mechanical systems
Licensing & Certification:
Valid Class A with air brakes endorsement
Current DOT medical certificate
FMCSA Clearinghouse registration
Technical Proficiencies:
Experience operating conveyor belts, knuckle booms, or crane-equipped trucks
Forklift operation experience; certification preferred
Knowledge of DOT regulations and OSHA safety standards
Experience:
Commercial driving experience preferred
Background in distribution environments beneficial
Experience with material handling and delivery logistics is a plus
Skills:
Ability to lift and move up to 100 lbs. repeatedly
Proficient in English (reading, writing, and verbal communication)
Skilled in pre- and post-trip vehicle inspections
Capable of conducting job site inspections and reporting conditions
Safety & Compliance
Strong adherence to safety protocols
Clean driving record (no hit-and-run, DWI, or DUI in the past 36 months)
Must pass background check and drug screening
Other Requirements:
Minimum age: 18 (21 if crossing state lines or transporting hazardous materials)
Must be legally authorized to work in the U.S. and pass E-Verify
Physical Requirements
Lift/move up to 100 lbs.
Work in various weather and noisy environments
Climb ladders and work at heights

Preferred Qualifications:

Qualifications & Experience
35 years of truck driving experience
Professional crane operation experience
Strong time and route management skills
Equipment Proficiency
Skilled in operating boom cranes, piggyback forklifts, and conveyor systems
Forklift certification preferred
Safety & Compliance
Deep knowledge of DOT and OSHA regulations
Proven commitment to safety standards and practices
Customer Service
Effective on-site communication and collaboration
Skilled in strategic material placement to meet customer needs
Problem Solving & Logistics
Quick resolution of delivery challenges
Efficient route planning to optimize time and fuel
Teamwork
Working collaboratively with teams
Inventory & Technology
Proficient in digital inventory management and order verification
Committed to continuous learning and skill enhancement

Minimum Education:

High school diploma or equivalent.

Preferred Education:

Vocational or technical training in heavy machinery operation.

Minimum Years Of Work Experience:

12 years of experience preferred. While not strictly required, prior commercial driving experience is strongly recommended. Experience in distribution and forklift operation is a plus.

Certifications:

Commercial Drivers License (CDL):
Valid Class A with air brakes endorsement.
NCCCO Crane Certification:
Specifically, ABC/ABL certification is required.
Truck Crane Operation Certification:
Preferred but not mandatory.
Telescopic Boom - Fixed Cab Certification:
Preferred but not mandatory.
Boom Truck - Fixed Cab Certification:
Preferred but not mandatory.
Articulating Boom Crane Certification:
Preferred but not mandatory.

Competencies:

Leadership & Collaboration
Able to lead and manage teams effectively
Adaptable to changing situations
Works well in team environments
Encourages innovation and communicates clearly
Customer-focused and results-driven
Skilled in conflict resolution
Safety & Compliance
Strict adherence to DOT and OSHA regulations
Maintains a strong safety record and promotes safe practices
Technical Skills
Proficient in operating commercial vehicles, cranes, forklifts, and conveyor systems
Accurate in inventory checks and site inspections
Communication & Customer Service
Clear, courteous communication with customers and team members
Focused on customer satisfaction and precise material placement
Problem Solving
Resolves delivery and site issues quickly and effectively
Physical & Environmental Readiness
Capable of lifting up to 100 lbs and working in varied conditions
Organization & Logistics
Efficient in planning routes and managing deliveries
Supports branch operations through task prioritization

Job Location:

• 
  
• Competitive salaries for all team members paid weekly
  
• 401(k) Retirement Plan with company matching
  
• Employee Stock Purchase Program
  
• Paid Vacation, Sick Time, Volunteer Day, Holidays, Birthday, and Floating Holidays
  
• Paid Parental Leave, Adoption Assistance Program
  
• Medical, Dental and Vision Benefits
  
• Flexible and Dependent Care Spending Accounts
  
• Company paid Life insurance and Short-Term Disability
  
• Additional Life Insurance and Long-Term Disability also offered
  
• Mental, Physical and Emotional Well-Being Programs for Employees and Families
  
• Wellness Program and Safety Program with Bonuses for our Drivers
  
• Employee Referral Bonus Program
  

Position Purpose:

Responsible for loading, unloading, transporting and positioning materials to and from various sites on the rooftop of residential homes and commercial buildings. Plays a vital role in ensuring the safe, timely, and efficient delivery and unloading of building materials at job sites, upholding the companys standards for outstanding customer service and operational excellence. Works in close coordination with the Driver to load materials onto trucks and manually unload them onto rooftops using a conveyor system, while carefully following Roofing Contractors specifications and protecting customer property. Throughout the execution of these tasks SRS safety standards must be upheld

Key Responsibilities:

• Load and unload roofing materials from delivery trucks using manual and mechanical methods, ensuring that all items are handled with care and precision to prevent damage.

• Ensuring that all safety guidelines and procedures are followed, aiding in the assembly of scaffolding and other structures, inspecting equipment, reporting any problems or issues.

• Facilitate the safe and effective distribution of materials onto flat and sloped roofs as per company safety guidelines, prioritizing the protection of workers and property.

• Operate conveyor belt systems (where trained and certified) to transport building materials from flatbed trucks to rooftops, maintaining a continuous flow to meet project timelines.

• Accurately verify and reconcile material orders, ensuring correct quantities are loaded and delivered, and maintain thorough documentation of all inventory movements.

• Provide exceptional service to roofing contractors by attending to their material needs and responding to inquiries, ensuring a professional and helpful interaction.

• Adhere strictly to OSHA safety regulations and company protocols, including the proper use of personal protective equipment (PPE), to foster a safe working environment on all job sites.

• Work closely with drivers and other team members to coordinate efficient loading and unloading processes and support overall branch operations and customer service tasks as needed.

• Support safety assessments by inspecting delivery sites for potential hazards and assisting drivers in safely maneuvering vehicles in tight or challenging spaces.

Direct Manager Direct Reports:

Reports to Site Supervisor/Manager. No direct reports.

Travel Requirements:

The Rooftop Loader position requires frequent local travel within the designated branch delivery area using company vehicles to customer locations, including residential and commercial sites. Occasional travel (typically less than 10% overnight) to assist at nearby branches or support out-of-town storm or emergency relief efforts, all subject to advance notice and aligned with delivery schedules and customer needs.

Physical Requirements:

• Should be physically fit and capable of lifting heavy items and operating machinery. Must have good balance and be comfortable working at heights.

• The role involves standing, walking, bending, climbing, and handling materials up to 100 lbs regularly.

• Additionally, the role demands the capacity to work on various roof pitches and heights, necessitating the wearing of personal protective equipment (PPE) including a harness.

• Standard office-based physical expectations may also apply, such as basic computer and communication tasks. We are committed to providing reasonable accommodations for individuals with disabilities, facilitating an inclusive work environment where all employees have the opportunity to succeed and perform essential job functions.

Working Conditions:

• Work is primarily outdoors and on rooftops, with exposure to various weather conditions. Safety equipment such as hard hats, safety harnesses, and gloves is required. The position also requires the ability to work at significant heights on varied roof surfaces, necessitating strict adherence to safety guidelines and the use of personal protective equipment (PPE).

• Work hours typically span Monday through Friday, with early start times and the potential for occasional overtime or weekend shifts to accommodate fluctuating delivery schedules and customer needs.

• Accompanying drivers to various residential and commercial locations.

• Exposure to loud machinery noise is inherent to the position, emphasizing the importance of maintaining focus and communication amidst challenging conditions.

Minimum Qualifications:

• Reliable transportation for commuting.

• Authorized to work for any employer in the United States without sponsorship.

• Ability to pass criminal and driving background checks, along with a pre-employment drug test.

• Physical stamina and strength, with the capability to lift between 80-100 lbs. properly and repeatedly.

• Basic math skills for accurate inventory counts.

• Proficient in verbal and written communication in English for efficient team collaboration and understanding job-related documents.

• Safety awareness with knowledge of OSHA guidelines, and the proper use of personal protective equipment (PPE), including work boots, gloves, and harnesses.

• Ability to read work orders, shipping orders, and follow verbal instructions thoroughly.

• Ability to work on sloped roofs of various pitches and heights.

• Must wear appropriate PPE, especially a harness, while performing rooftop loading tasks.

• Ability to work in diverse weather conditions, exposed to high noise levels.

• Availability to work Monday through Friday with the potential for overtime based on delivery schedules and peak seasons.

• Must embrace the company culture of \"Make Money and Have Fun!\" and demonstrate reliability, safety, and teamwork.

Preferred Qualifications:

• Knowledge of construction materials and procedures, proficiency in operating a forklift, and previous experience in roof work.

• Possess over one year of demonstrable experience in building materials, roofing supply, or rooftop delivery, showcasing a solid understanding of the industry standards and practices.

• Previous experience in the operation of forklifts, boom/crane trucks, or similar material handling equipment, highlighting the ability to manage technology that enhances job efficiency and safety.

• Familiarity with the safe and efficient use of conveyor systems and other relevant loading machinery, ensuring streamlined operations and adherence to safety protocols.

• Proficiency in Spanish, in addition to English, allowing effective communication in diverse working environments and enhancing service quality for a broader customer base.

Minimum Education:

High School Diploma or equivalent.

Preferred Education:

Completion of relevant vocational training or certification in construction, material handling, or forklift operation is highly desirable to enhance industry-specific skills and competencies.

Minimum Years Of Work Experience:

A minimum of 6 months to 1 year of work experience in general labor, warehouse operations, delivery, or construction-related fields is required.

Certifications:

Forklift certification preferred.

Competencies:

• Demonstrates the ability to perform labor-intensive tasks, including lifting 50-100 lbs. repeatedly, and supports prolonged physical activity on potentially challenging terrains such as sloped rooftops.

• Maintains a rigorous adherence to OSHA guidelines and company safety protocols, ensuring a hazard-free work environment while using personal protective equipment and when operating machinery.

• Works effectively with drivers, roofing contractors, and other team members to ensure smooth coordination and successful completion of delivery and loading tasks.

• Ensures accuracy in reading work orders, confirming inventory counts, and verifying order fulfillment, while taking special care to protect the customer's property during material handling.

• Consistently meets work attendance requirements and demonstrates reliability in adhering to delivery schedules and fulfilling job duties with minimal supervision.

• Exhibits strong verbal and written communication skills in English to interpret instructions, convey information clearly to teammates and customers, and document any issues encountered on the job.

• Displays flexibility in handling varied work hours and conditions, adapting to changing delivery requirements, weather conditions, and customer needs efficiently and professionally.

• Prioritizes customer satisfaction by delivering excellent service and addressing customer needs promptly and courteously, reinforcing the companys customer-centric values.

Job Location:

• 
  
• Competitive salaries for all team members paid weekly
  
• 401(k) Retirement Plan with company matching
  
• Employee Stock Purchase Program
  
• Paid Vacation, Sick Time, Volunteer Day, Holidays, Birthday, and Floating Holidays
  
• Paid Parental Leave, Adoption Assistance Program
  
• Medical, Dental and Vision Benefits
  
• Flexible and Dependent Care Spending Accounts
  
• Company paid Life insurance and Short-Term Disability
  
• Additional Life Insurance and Long-Term Disability also offered
  
• Mental, Physical and Emotional Well-Being Programs for Employees and Families
  
• Wellness Program and Safety Program with Bonuses for our Drivers
  
• Employee Referral Bonus Program
  

The Fabrication Craftsman plays a vital role in building the themed, architectural, and structural elements that define Nassal’s world-class fabrication projects.

This position encompasses multiple trades—Bodywork, Sculpting, Mold-Making, Casting, Carpentry, Metal Fabrication, and Painting—allowing skilled craftsmen and creative fabricators to work across disciplines while developing their craft within one of the industry’s most collaborative and innovative environments.

As part of the PCL Family of Companies, Nassal combines artistry, engineering, and construction excellence to deliver extraordinary experiences. Fabrication Craftsmen contribute to this mission through precision, safety, creativity, and teamwork. programs.

Overall Key Responsibilities:

• Follow all safety regulations, PPE requirements, and shop procedures.

• Read and interpret blueprints, shop drawings, and technical specifications.

• Fabricate and finish components using fiberglass (FRP), resin, foam, and composite

materials.

• Perform specialized tasks across multiple disciplines:

o Bodywork: Sanding, shaping, prepping, and finishing surfaces for paint or coatings.

o Sculpt/Mold/Cast: Sculpting foam or clay, fabricating molds, and casting fiberglass and

composite materials.

• Use hand tools, power tools, and fabrication machinery safely and effectively.

• Collaborate with leads and foremen to meet production schedules and quality standards.

• Inspect and verify workmanship meets project and QA/QC requirements.

• Maintain a clean, organized, and safe work area.

• Train, mentor, or guide junior team members depending on experience level.

• Support continuous improvement initiatives to enhance shop efficiency and craftsmanship.

• Perform additional duties as assigned.

Depending on your level of experience, responsibilities may include:

Apprentice (Entry-Level)

• Learns foundational fabrication skills across multiple trades.

• Assists with prep work, material handling, and general production support.

• Demonstrates initiative, reliability, and safety awareness.

Journeyman (Intermediate)

• Works independently in one or more fabrication disciplines.

• Reads and follows detailed shop drawings and layouts.

• Contributes to achieving production goals while maintaining quality.

Craftsman (Advanced)

• Demonstrates mastery across multiple trades or specialization in one discipline.

• Trains and mentors apprentices and supports shop coordination.

• Produces complex components with high precision and finish quality.

Lead (Leadership)

• Oversees shop teams and daily workflows.

• Ensures quality control, safety, and adherence to project timelines.

• Collaborates with foremen, engineers, and project managers to align deliverables.

COMPETENCIES:

• Communication: Clear verbal and written communication; strong reporting and listening skills.
• Adaptability: Adjusts to changes in assignments, tools, and project priorities.
• Job Knowledge: Possesses deep technical expertise in fabrication; stays current with evolving materials, processes, and standards.
• Managing Conflict: Handles disputes constructively; promotes open communication and resolution-oriented dialogue.
• Problem-Solving: Breaks complex quality issues into manageable parts, identifies root causes, and implements corrective measures.
• Decision Making: Analyzes issues, gathers input, and makes informed, timely decisions that align with company goals and quality standards.
• Dependability: Completes tasks with minimal supervision while maintaining accountability.
• Teamwork: Works collaboratively with others; values diverse perspectives; supports team goals; fosters a positive and cooperative work atmosphere.
• Initiative: Demonstrates willingness to learn, take on tasks, and ask questions when needed.
• Self-Development: Pursues ongoing learning and certification; applies new techniques to improve shop operations.
• Safety Awareness: Actively identifies and avoids hazards; follows all safety protocols.

QUALIFICATIONS:

• 0-7+ years of experience in fabrication, themed construction, or related trades.
• Proficiency with fabrication tools, materials, and shop machinery.
• Ability to read and interpret shop drawings, layouts, and specifications.
• Strong understanding of safety and quality standards.
• Excellent teamwork, communication, and time management skills.
• Willingness to continuously develop technical skills and expertise.

WORKING CONDITIONS:

• Shop and fabrication environment with exposure to dust, heat, noise, and odors.
• Must wear appropriate personal protective equipment (PPE) at all times.
• May be required to work extended hours or weekends, depending on project needs.

PHYSICAL REQUIREMENTS:

• Ability to lift, sand, mask, and move materials up to 50 lbs. regularly and maneuver heavy materials using mechanical assistance when necessary.
• Comfortable standing, bending, and performing repetitive tasks for extended periods.
• Manual dexterity and hand-eye coordination to safely use tools and materials.
• Must maintain continuous awareness of hazards and enforce safety practices.

PCL is an innovative, employee-owned company comprised of people who find passion in their profession and take pride in doing great work every day. Our work powers the infrastructure and utilities that are essential to daily life, and our projects are the scene of vacations, careers, education, and healing. We are consistently ranked among the best companies to work for because we are committed to supporting and developing our teams.

The PCL Companies celebrate diversity and are proud to be an equal opportunity employer. We are committed to creating equitable opportunities and an inclusive environment for all employees and applicants. We make employment-related decisions without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, age, disability, or veteran status.

PCL combines numerous pay and benefit strategies to provide a comprehensive and competitive total rewards package. Any salary range displayed by a job board is an estimate. Your salary, which considers your unique qualifications and experience, is just one component of the robust total rewards you'll enjoy at PCL. This may include an employee share purchase offering, discretionary annual performance bonus, comprehensive benefits and wellness programs, retirement plan plus matching, and career development programs.

Should you require an accommodation during the application process, please contact us at with the position and location you are interested in.

Together, we can build success and a better future. Let’s get started!

Job Summary

We are seeking a skilled and dependable CNC Machinist to operate, set up, and maintain CNC equipment used to machine large industrial components. The ideal candidate will have experience in a heavy‑industrial manufacturing environment such as material handling systems, rotating equipment, or large fabricated assemblies. This role requires precision, safety awareness, and the ability to work with tight tolerances on large, complex parts.

Key Responsibilities

• Set up, operate, and monitor CNC machines (mills, lathes, horizontal/vertical machining centers) to produce parts to specification.
• Read, interpret, and work from engineering drawings, blueprints, and work orders.
• Perform machine offsets, tool changes, and basic program edits as needed.
• Inspect finished parts using calipers, micrometers, gauges, and other precision measurement tools to ensure accuracy and quality.
• Work with large and heavy components commonly used in industrial equipment (fans, dampers, rotary feeders, shafts, housings, structural components, etc.).
• Maintain proper tooling, fixturing, and machine cleanliness.
• Troubleshoot machining issues such as dimensional errors, tool wear, chatter, and material inconsistencies.
• Follow all safety procedures for handling heavy materials, overhead cranes, forklifts, and industrial equipment.
• Collaborate with engineering, quality, and fabrication teams to ensure parts meet design and performance standards.
• Document production data, inspection results, and any deviations from standard processes.
• Assist in preventive maintenance and minor repairs on CNC machinery.

Job Requirements

• 2–5+ years of CNC machining experience in an industrial, manufacturing, or heavy‑fabrication environment.
• Experience machining steel, stainless, abrasion‑resistant plate, and other industrial‑grade materials.
• Experience with large‑format CNC machines is a strong plus.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for a Metal Surface Processor to join our Fabrication team in Auburn, Algona and Puyallup, Washington.

As a Metal Surface Processor, you’ll be part of a skilled team responsible for preparing metal components for aerospace applications through specialized surface treatment processes. From cleaning and masking to anodizing and coating, your work will directly support the quality and performance of parts built for flight. This role requires precision, technical ability, and a strong commitment to safety as you work with complex equipment and follow detailed procedures to ensure each component meets exact specifications.

You will play a critical role in upholding our commitment to safety and quality standards and ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and join our mission to deliver excellence in aviation.

Position Responsibilities:

• Review the tie-in book or standard operating procedures to understand daily work assignments. Provide comprehensive oral or written shift handoffs to ensure seamless workflow continuity.

• Monitor the workload in the area and coordinate task flow to optimize shop utilization. Proactively report issues or request additional support as necessary.

• Identify, separate, and prepare parts according to work orders and chemical recipes (e.g., alkaline, emulsion, paint strip, sandblast, passivate) prior to racking.

• Conduct thorough inspections of materials to verify proper cleaning, etching, rinsing, and other processes to ensure optimal adhesion and coating quality. Perform visual checks post-process to confirm uniform coverage.

• Apply approved masking materials and coatings based on technical drawings or tooling specifications in preparation for plating or painting operations.

• Determine appropriate racking methods for complex part geometries, ensuring proper contact to prevent burning. Inspect, remove, and report any damaged racks or clips.

• Rack and unrack parts while verifying correct part numbers and chemical processes as per work orders. Ensure no overloading or air pocket formation occurs during handling.

• Operate material handling systems, including cranes, hoists, and carts, safely to transport parts and materials through processing areas.

• Operate and monitor cleaning, Dow Coating, anodizing, dyeing, alodine, and rinsing tanks. Determine correct dip times and maintain appropriate temperatures and solution levels.

• Perform specific treatments such as sulfuric/chromic acid dips on 75 ST parts formed on Cerro Bend. Apply alodine touch-ups or chromadize as required.

• Assist in maintaining chemical strength by accurately measuring and adding solutions. Estimate material surface area to prevent generator overloads.

• Start generators, operate control panels, and utilize overhead cranes to load/unload tanks and transfer processed items between stations.

• Strip anodizing from racks using caustic soda and nitric acid. Clean tanks, crocks, and equipment to ensure safe and efficient operations.

• Mark, oil, wrap, and route completed parts according to drawings or work orders. Ensure correct parts are matched to work orders and transferred to Quality Assurance (QA) for inspection.

• Handle and dispose of hazardous materials (e.g., alodine, acids, solvents) in accordance with safety procedures. Complete all required on-the-job training and maintain necessary certifications.

Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.

• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.

• Work in environments that may involve contact with metals, solvents, and coolants.

• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.

• Adapt to varying noise levels and atmospheric conditions.

• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee

Current Boeing employees working in Puget Sound and Portland must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.

Basic Qualifications:

• 1+ years of experience using basic math (e.g. addition, subtraction, multiplication and division).

• 1+ years of experience or training reading and interpreting drawings or blueprints.

• 1+ years of experience working with hazardous materials.

• Must be able to lift, push and pull up to 35 pounds

Preferred Qualifications:

• Experience operating cranes.

Typical Education & Experience:

• High school graduate or GED preferred.

Relocation:

• Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement:

• This position is for a variety of shifts.

Total Rewards & Pay Transparency

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.  Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.  

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.  

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay: $24.32/hour, with potential to earn up to $53.30/hour in accordance with the terms of the relevant collective bargaining agreement.

Applications for this position will be accepted until Apr. 11, 2026

Language Requirements

English Preferred

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

• 
  
• 
  70% Transformer Core Assembly
  • 
    
  • Perform the assembly of transformer cores by stacking laminations according to engineering drawings and work instructions.
    
  • Install and secure the lower yoke and columns, ensuring proper alignment and fit.
    
  • Precisely place oil channels, insulation, and other specified materials within the core structure as per design specifications.
    
  • Operate overhead cranes, forklifts, and other material handling equipment to safely move and position heavy transformer components.
    
  
  
  
• 
  30% Safety, Quality, and Process Adherence
  • 
    
  • Adhere strictly to all company safety policies, procedures, and quality assurance standards during assembly tasks.
    
  • Read and interpret engineering drawings, schematics, and manufacturing procedures to ensure accurate and compliant assembly.
    
  • Participate in specialized training programs for Large Power Transformer manufacturing and engage in cross-training for new processes.
    
  • Maintain a clean, organized work area and report any equipment malfunctions or process deviations to the team supervisor.
    
  
  
  

• 
  
• High School Diploma or GED required; prior experience in heavy industrial manufacturing, fabrication, or assembly preferred.
  
• Strong ability to operate overhead cranes and forklifts; blueprint?reading experience highly desirable.
  
• Technical skills include engineering drawings, mechanical assembly, electrical transformers, and material?handling equipment operation.
  
• Experience working with electrical equipment and applying quality control standards.
  
• Knowledge of electrical safety and continuous improvement processes.
  
• Behavioral strengths include accountability, troubleshooting/problem?solving, and analytical skills.
  

• 
  
• Career growth and development opportunities
  
• Supportive work culture
  
• Company paid Health and wellness benefits
  
• Paid Time Off and paid holidays
  
• 4 01K savings plan with company match
  
• Family building benefits
  

Position Title: Foreman
- Piping Systems Division Date Posted: 07/23/2025 Location: Walterboro, SC Pay Range: N/A Please review position description and requirements and begin application online by clicking on the Apply Now above.

POSITION SUMMARY Provide front-line supervision of Pipefitting and Welding related tasks and processes to WB Welders, Fitters, and Apprentice level Help ESSENTIAL DUTIES Perform safely, productively and with a focus on quality all duties of a Fitter/Welder as necessary.

• Supervise and coordinate activities of workers engaged in construction of WB contract items.

Examine/interpret Pipe drawings, Floor Plans and PID’s to determine dimensions, specifications, and/or discover any errors in design of project.

Under the guidance and supervision of the superintendent, develop, implement and monitor Pre-Task Safety Planning on assigned job sites.

Oversee and ensure “lay out” of WB construction work using framing square, tape measure, and other mechanical or electronic measuring devices (theodolites, box levels, etc.).

Assist superintendent in selecting and organizing materials to be used on assigned project.

Assist superintendent in planning the sequence of activities needed to complete the assigned project.

Assign welders, Fitters, and laborers tasks necessary to complete an assigned project.

Operate equipment safely when necessary to convey building materials and/or prepare locations for building processes including, but not limited to, excavations, material handling, slab on grade prep, etc.

Calculate Pipe and fitting quantities and schedule delivery in a timely manner.

Supervise Piping installations and basic welding activities as necessary and appropriate.

Examine and adjust delivered piping as necessary to within project specifications prior to installation.

Using the Plan, Do, Study, and Act (PDSA) approach, make necessary adjustments to complete the assigned project at the highest level of safety, quality, production, and innovation.

Communicate project status and needs to superintendent and/or project managers (e.g., staffing, materials, equipment, etc.) Troubleshoot and handle any problems that may arise during WB construction activities.

Assist the superintendent and project manager as necessary with coordinating construction activities to assure that the work is completed at the highest level of safety, quality, production, and innovation.

Comply with all pertinent WB, state, OSHA safety rules, regulations, guidelines and policies.

Assure that all pertinent WB, state and OSHA safety rules, regulations, guidelines, and policies are followed by all employees, at all times.

Report any job site and/or WB employee related safety violation(s) to superintendent and safety department.

Assist superintendent with personnel and work evaluation processes.

Complete any appropriate paperwork on incidents (e.g., equipment accidents, safety violations, equipment repairs, equipment usage reports, equipment “tag out”, other personnel matters, etc.) to superintendent and safety department as necessary or requested.

Meet and walk with Engineers, Construction Managers or special inspection personnel (e.g.

Structural Engineer, Passivation).

Coordinate construction activities with other trades and subcontractors at the field level.

Assist and coordinate deliveries of materials and equipment with the superintendent as needed.

Oversee loading and unloading materials and equipment so as to ensure they are staged in the appropriate area.

Coordinate safely the loading and unloading of delivered equipment and materials to create on-site inventory count of items delivered and when returning equipment and materials (e.g., Pipe/Tube, Skids, Fittings,Valves, etc.) Participate in company sponsored craft and safety training activities.

Serve as a safe and productive team member of a construction crew/team.

Perform all assigned roles, responsibilities, and related work processes/tasks in the safest possible manner.

Ensure that a safe, accident/incident-free work environment is maintained for all co-workers, customers, clients, suppliers, etc.

at all times.

PM20 Education and/or Experience High School Diploma/GED/Apprenticeship
- preferred Vocational or technical training in construction
- desirable Knowledge, Skills and Abilities Required Planning, prioritizing, and scheduling work tasks, processes, and teams.

Analyzing and interpreting blueprints, shop drawings, PID’s and various construction documents.

Measuring and calculating square/Linear feet precisely.

Problem-solving and troubleshooting.

Communicating/reporting with supervisors and team.

Analyzing, supervising, and guiding the completion of site safety and work-task plans.

Recognizing and correcting/teaching job site hazards.

Making judgments and decisions.

Listening, speaking, reading and writing at a basic level.

Thinking logically and critically.

Seeing and interpreting details close-up and far away.

Consistent focus on Safety, Quality, Production, and Innovation.

Interaction with other trades or subcontractors.

Working Conditions Outdoors
- rarely Indoors
- frequently Loud noise
- frequently Temperatures
- seasonal Personal Protective Equipment – at all times Multi-activity worksites
- frequently Traveling/out of town
- frequently 40 to 60-hour work week
- frequently Heights and depths
- frequently Certificates, Licenses, Registrations Valid driver’s license – preferred OSHA 10-Hour Certification – required; training provided by Wayne Brothers OSHA 30-Hour Certification
- required; training provided by Wayne Brothers First Aid/CPR
- desirable All-terrain material handler certification –desirable Aerial lift certification – desirable WB Craft Training and other certifications up through Foreman Level
- preferred Physical Demands Lifting and carrying up to 50 pounds Frequent lifting, bending, kneeling and reaching Standing for long periods of time Climbing ladders, working at heights, wearing/using fall protection harness Handling pipe and associated fittings Rigging and Setting equipment and materials Wayne Brothers, Inc is an Equal Employment Opportunity/ Affirmative Action Employer.

Read our EEO/AAE policy.

PIcca18f14e6f2-25448-38157089

Position Title: Foreman
- Piping Systems Division Date Posted: 07/23/2025 Location: Walterboro, SC Pay Range: N/A Please review position description and requirements and begin application online by clicking on the Apply Now above.

POSITION SUMMARY Provide front-line supervision of Pipefitting and Welding related tasks and processes to WB Welders, Fitters, and Apprentice level Help ESSENTIAL DUTIES Perform safely, productively and with a focus on quality all duties of a Fitter/Welder as necessary.

• Supervise and coordinate activities of workers engaged in construction of WB contract items.

Examine/interpret Pipe drawings, Floor Plans and PID’s to determine dimensions, specifications, and/or discover any errors in design of project.

Under the guidance and supervision of the superintendent, develop, implement and monitor Pre-Task Safety Planning on assigned job sites.

Oversee and ensure “lay out” of WB construction work using framing square, tape measure, and other mechanical or electronic measuring devices (theodolites, box levels, etc.).

Assist superintendent in selecting and organizing materials to be used on assigned project.

Assist superintendent in planning the sequence of activities needed to complete the assigned project.

Assign welders, Fitters, and laborers tasks necessary to complete an assigned project.

Operate equipment safely when necessary to convey building materials and/or prepare locations for building processes including, but not limited to, excavations, material handling, slab on grade prep, etc.

Calculate Pipe and fitting quantities and schedule delivery in a timely manner.

Supervise Piping installations and basic welding activities as necessary and appropriate.

Examine and adjust delivered piping as necessary to within project specifications prior to installation.

Using the Plan, Do, Study, and Act (PDSA) approach, make necessary adjustments to complete the assigned project at the highest level of safety, quality, production, and innovation.

Communicate project status and needs to superintendent and/or project managers (e.g., staffing, materials, equipment, etc.) Troubleshoot and handle any problems that may arise during WB construction activities.

Assist the superintendent and project manager as necessary with coordinating construction activities to assure that the work is completed at the highest level of safety, quality, production, and innovation.

Comply with all pertinent WB, state, OSHA safety rules, regulations, guidelines and policies.

Assure that all pertinent WB, state and OSHA safety rules, regulations, guidelines, and policies are followed by all employees, at all times.

Report any job site and/or WB employee related safety violation(s) to superintendent and safety department.

Assist superintendent with personnel and work evaluation processes.

Complete any appropriate paperwork on incidents (e.g., equipment accidents, safety violations, equipment repairs, equipment usage reports, equipment “tag out”, other personnel matters, etc.) to superintendent and safety department as necessary or requested.

Meet and walk with Engineers, Construction Managers or special inspection personnel (e.g.

Structural Engineer, Passivation).

Coordinate construction activities with other trades and subcontractors at the field level.

Assist and coordinate deliveries of materials and equipment with the superintendent as needed.

Oversee loading and unloading materials and equipment so as to ensure they are staged in the appropriate area.

Coordinate safely the loading and unloading of delivered equipment and materials to create on-site inventory count of items delivered and when returning equipment and materials (e.g., Pipe/Tube, Skids, Fittings,Valves, etc.) Participate in company sponsored craft and safety training activities.

Serve as a safe and productive team member of a construction crew/team.

Perform all assigned roles, responsibilities, and related work processes/tasks in the safest possible manner.

Ensure that a safe, accident/incident-free work environment is maintained for all co-workers, customers, clients, suppliers, etc.

at all times.

PM20 Education and/or Experience High School Diploma/GED/Apprenticeship
- preferred Vocational or technical training in construction
- desirable Knowledge, Skills and Abilities Required Planning, prioritizing, and scheduling work tasks, processes, and teams.

Analyzing and interpreting blueprints, shop drawings, PID’s and various construction documents.

Measuring and calculating square/Linear feet precisely.

Problem-solving and troubleshooting.

Communicating/reporting with supervisors and team.

Analyzing, supervising, and guiding the completion of site safety and work-task plans.

Recognizing and correcting/teaching job site hazards.

Making judgments and decisions.

Listening, speaking, reading and writing at a basic level.

Thinking logically and critically.

Seeing and interpreting details close-up and far away.

Consistent focus on Safety, Quality, Production, and Innovation.

Interaction with other trades or subcontractors.

Working Conditions Outdoors
- rarely Indoors
- frequently Loud noise
- frequently Temperatures
- seasonal Personal Protective Equipment – at all times Multi-activity worksites
- frequently Traveling/out of town
- frequently 40 to 60-hour work week
- frequently Heights and depths
- frequently Certificates, Licenses, Registrations Valid driver’s license – preferred OSHA 10-Hour Certification – required; training provided by Wayne Brothers OSHA 30-Hour Certification
- required; training provided by Wayne Brothers First Aid/CPR
- desirable All-terrain material handler certification –desirable Aerial lift certification – desirable WB Craft Training and other certifications up through Foreman Level
- preferred Physical Demands Lifting and carrying up to 50 pounds Frequent lifting, bending, kneeling and reaching Standing for long periods of time Climbing ladders, working at heights, wearing/using fall protection harness Handling pipe and associated fittings Rigging and Setting equipment and materials Wayne Brothers, Inc is an Equal Employment Opportunity/ Affirmative Action Employer.

Read our EEO/AAE policy.

PIcca18f14e6f2-25448-38157089

Position Title: Foreman
- Piping Systems Division Date Posted: 07/23/2025 Location: Walterboro, SC Pay Range: N/A Please review position description and requirements and begin application online by clicking on the Apply Now above.

POSITION SUMMARY Provide front-line supervision of Pipefitting and Welding related tasks and processes to WB Welders, Fitters, and Apprentice level Help ESSENTIAL DUTIES Perform safely, productively and with a focus on quality all duties of a Fitter/Welder as necessary.

• Supervise and coordinate activities of workers engaged in construction of WB contract items.

Examine/interpret Pipe drawings, Floor Plans and PID’s to determine dimensions, specifications, and/or discover any errors in design of project.

Under the guidance and supervision of the superintendent, develop, implement and monitor Pre-Task Safety Planning on assigned job sites.

Oversee and ensure “lay out” of WB construction work using framing square, tape measure, and other mechanical or electronic measuring devices (theodolites, box levels, etc.).

Assist superintendent in selecting and organizing materials to be used on assigned project.

Assist superintendent in planning the sequence of activities needed to complete the assigned project.

Assign welders, Fitters, and laborers tasks necessary to complete an assigned project.

Operate equipment safely when necessary to convey building materials and/or prepare locations for building processes including, but not limited to, excavations, material handling, slab on grade prep, etc.

Calculate Pipe and fitting quantities and schedule delivery in a timely manner.

Supervise Piping installations and basic welding activities as necessary and appropriate.

Examine and adjust delivered piping as necessary to within project specifications prior to installation.

Using the Plan, Do, Study, and Act (PDSA) approach, make necessary adjustments to complete the assigned project at the highest level of safety, quality, production, and innovation.

Communicate project status and needs to superintendent and/or project managers (e.g., staffing, materials, equipment, etc.) Troubleshoot and handle any problems that may arise during WB construction activities.

Assist the superintendent and project manager as necessary with coordinating construction activities to assure that the work is completed at the highest level of safety, quality, production, and innovation.

Comply with all pertinent WB, state, OSHA safety rules, regulations, guidelines and policies.

Assure that all pertinent WB, state and OSHA safety rules, regulations, guidelines, and policies are followed by all employees, at all times.

Report any job site and/or WB employee related safety violation(s) to superintendent and safety department.

Assist superintendent with personnel and work evaluation processes.

Complete any appropriate paperwork on incidents (e.g., equipment accidents, safety violations, equipment repairs, equipment usage reports, equipment “tag out”, other personnel matters, etc.) to superintendent and safety department as necessary or requested.

Meet and walk with Engineers, Construction Managers or special inspection personnel (e.g.

Structural Engineer, Passivation).

Coordinate construction activities with other trades and subcontractors at the field level.

Assist and coordinate deliveries of materials and equipment with the superintendent as needed.

Oversee loading and unloading materials and equipment so as to ensure they are staged in the appropriate area.

Coordinate safely the loading and unloading of delivered equipment and materials to create on-site inventory count of items delivered and when returning equipment and materials (e.g., Pipe/Tube, Skids, Fittings,Valves, etc.) Participate in company sponsored craft and safety training activities.

Serve as a safe and productive team member of a construction crew/team.

Perform all assigned roles, responsibilities, and related work processes/tasks in the safest possible manner.

Ensure that a safe, accident/incident-free work environment is maintained for all co-workers, customers, clients, suppliers, etc.

at all times.

PM20 Education and/or Experience High School Diploma/GED/Apprenticeship
- preferred Vocational or technical training in construction
- desirable Knowledge, Skills and Abilities Required Planning, prioritizing, and scheduling work tasks, processes, and teams.

Analyzing and interpreting blueprints, shop drawings, PID’s and various construction documents.

Measuring and calculating square/Linear feet precisely.

Problem-solving and troubleshooting.

Communicating/reporting with supervisors and team.

Analyzing, supervising, and guiding the completion of site safety and work-task plans.

Recognizing and correcting/teaching job site hazards.

Making judgments and decisions.

Listening, speaking, reading and writing at a basic level.

Thinking logically and critically.

Seeing and interpreting details close-up and far away.

Consistent focus on Safety, Quality, Production, and Innovation.

Interaction with other trades or subcontractors.

Working Conditions Outdoors
- rarely Indoors
- frequently Loud noise
- frequently Temperatures
- seasonal Personal Protective Equipment – at all times Multi-activity worksites
- frequently Traveling/out of town
- frequently 40 to 60-hour work week
- frequently Heights and depths
- frequently Certificates, Licenses, Registrations Valid driver’s license – preferred OSHA 10-Hour Certification – required; training provided by Wayne Brothers OSHA 30-Hour Certification
- required; training provided by Wayne Brothers First Aid/CPR
- desirable All-terrain material handler certification –desirable Aerial lift certification – desirable WB Craft Training and other certifications up through Foreman Level
- preferred Physical Demands Lifting and carrying up to 50 pounds Frequent lifting, bending, kneeling and reaching Standing for long periods of time Climbing ladders, working at heights, wearing/using fall protection harness Handling pipe and associated fittings Rigging and Setting equipment and materials Wayne Brothers, Inc is an Equal Employment Opportunity/ Affirmative Action Employer.

Read our EEO/AAE policy.

PIcca18f14e6f2-25448-38157089

Machine Shop Supervisor – CNC Operations, Programming & Advanced Manufacturing

Technical Source is seeking a Machine Shop Supervisor with deep expertise in CNC machining, programming, and leadership within a high‑precision manufacturing environment. Our client is an industry-leading designer and builder of custom automation systems supporting industrial, medical, and semiconductor applications. Their U.S. machining and automation operations support the production of specialized components used in complex modules, equipment platforms, and fully integrated production systems.

This position plays a critical role in shaping the machine shop of the future, including leading day‑to‑day machining activities, guiding CNC operators, refining programming strategies, and helping establish a new machining facility that will integrate directly with advanced automation and robotic workflows.

Role Overview

As the Machine Shop Supervisor, you will be the primary leader responsible for CNC machining operations that support sophisticated automated manufacturing systems. You will guide personnel, oversee production schedules, develop CNC programs, and ensure best‑in‑class machining practices across multi‑axis equipment and robotic machine‑tending environments.

You will also be heavily involved in planning and setting up the machine shop during an upcoming facility relocation, including equipment layout, workflow optimization, and integrating machining activities with automated equipment and digital manufacturing technologies.

Every day will bring new challenges … new parts, new processes, and new engineering problems to solve, while maintaining a high standard of precision, safety, and operational excellence.

Key Responsibilities

• Lead, train, and mentor CNC machinists to meet production goals and uphold quality and safety standards.
• Oversee daily machining operations, including scheduling, prioritizing workloads, and coordinating with automated production lines and supporting departments.
• Create, refine, and optimize CNC programs for complex components used in robotic assemblies, tooling packages, motion‑control systems, and custom automated machinery.
• Use CAM programming tools (Mastercam, Fusion 360, or equivalent) to develop efficient toolpaths, reduce cycle times, and ensure compatibility with automated material-handling systems.
• Support and troubleshoot multi-axis machining centers, robotic tending cells, and automation-assisted machining processes; experience with Okuma equipment is highly beneficial.
• Drive the setup and organization of the new machine shop facility—including equipment placement, workflow development, process layout, and integration with automation and digital systems.
• Collaborate closely with engineering, automation, and maintenance teams to address machining issues, improve system performance, and enhance uptime and reliability.
• Interpret detailed engineering drawings, GD&T requirements, and automation-related part specifications to ensure accurate and repeatable production results.
• Maintain a clean, organized, and safety‑focused work environment aligned with modern automated manufacturing expectations.
• Participate in continuous-improvement initiatives involving automation enhancements, process optimization, tooling improvements, and smart‑manufacturing strategies.

Required Qualifications

• Prior experience in setting up a machine shop or similar environment (industrial automation or advanced-manufacturing environment)
• Associate or Bachelor’s degree in Machine Tool Technology, Computer Integrated Machining, or a closely related manufacturing discipline.
• 8+ years of experience in CNC machining, electrical/mechanical technical support, or similar roles in an advanced-manufacturing environment.
• Demonstrated background in CNC machining, programming, and supervising machining teams within high‑precision or automation-driven production settings.
• Strong understanding of multi‑axis machining, robotic machine‑tending concepts, and automated part-handling systems.
• Proficiency with CAM software such as Mastercam, Fusion 360, or similar platforms.
• Working knowledge of advanced manufacturing technologies (robotics, PLC-controlled equipment, vision systems, digital factory tools).
• Solid foundation in machining fundamentals, tooling selection, fixturing, and precision manufacturing practices.
• Strong leadership, communication, and troubleshooting skills with the ability to support both machining personnel and automated systems.

Work Environment & Location

• Full‑time, onsite position based in the Raleigh/Morrisville area.
• Role requires hands‑on presence on the shop floor; remote or hybrid schedules are not available.
• Position includes significant involvement in setting up a newly relocated machine shop.
• Relocation assistance is not provided.

What They Offer

• Competitive Compensation – Pay aligned with technical skill level and supervisory responsibilities.
• Health Benefits – Medical, dental, and vision insurance covered by the company.
• Life Insurance – Company‑paid plan for financial protection.
• 401(k) Retirement Plan – Employee contribution options to support long-term savings.
• Paid Time Off – Flexible PTO plus company‑paid holidays.
• Uniforms & Safety Gear – Provided to ensure professionalism and workplace safety.
• Advanced Technology Exposure – Work with multi‑axis machining, robotics, and automation-enabled processes supporting high‑precision, high-volume production environments.

You’ll join a collaborative, engineering-driven culture where machinists, programmers, and automation specialists work side-by-side—and where your skill, initiative, and leadership will directly influence the success of next‑generation automated manufacturing systems.