Precise Examples Jobs in Usa

Build a Career That Matters with One of the World's Most Respected Employers!

- - - - - - - - - - - -

Operates independently and cooperates with other Central Metrology Technicians to guarantee precision, dependability, and adherence to established standards for calibrations within Central Metrology Lab Scope.

Calibration: Check, analyze, and recalibrate measurement devices based on established criteria, maintaining accurate readings.

Documentation: Maintain clear, detailed logs of laboratory standards, calibration procedures, test findings, and maintenance carried out to follow quality management systems and external guidelines (e.g., ISO 17025).

Process improvement: Partner with fellow Central Metrology Technicians and Internal Business Partners to advance metrology practices and calibration protocols, spot opportunities for progress, and carry out solutions.

Training: Provide training and guidance as needed to other technicians and internal business partners on metrology and calibration techniques and standard methodologies.

Troubleshooting: Detect and address inconsistencies in process and procedures by conducting root cause analysis.

Works autonomously and collaboratively with other Central Metrology Technicians to ensure precision, reliability, and conformity to defined standards for calibrations within the Central Metrology Lab Scope.

Calibration: Assess, test, and calibrate measurement devices following established standards, maintaining accurate readings.

Documentation: Carefully and thoroughly record all laboratory standards, calibration processes, test outcomes, and maintenance to meet quality management systems and external criteria (e.g., ISO 17025).

Process improvement: Work alongside other Central Metrology Technicians and Internal Business Partners to advance metrology techniques and calibration procedures, detect areas needing improvement, and apply solutions.

Training: Deliver instruction and mentorship as required to other technicians and internal business partners regarding metrology and calibration techniques and standard processes.

Troubleshooting: Detect and address inconsistencies in processes and procedures by conducting root cause analysis.

Adhere to safety protocols and procedures, including the use of personal protective equipment (PPE).

Perform calibrations on a wide range of measuring devices using precision measuring instruments and software, ensuring environmental controls in the lab are adequate before performing calibrations. Detect and communicate any measurement/calibration nonconformities to all interested parties.

Record and document test results, maintenance performed, and any deviations or non-conformities in calibration logs, records, and certificates, ensuring traceability and adherence to quality and regulatory standards.

Coordinate and arrange the servicing of devices alongside other Central Metrology Technicians to enhance lab operational efficiency. Use organizational and time management abilities to handle workloads and schedules efficiently.

Assist in the development and/or update of calibration procedures and documentation in accordance with National, International, or Industry Standards.

Provide technical aid and advice to colleagues and Internal Business Partners.

> Perform calibration of various parameters of gauge types, as approved by procedure training, evidence of competency, and maintaining individual uncertainties in alignment with other calibration technicians

• Dimensional - Hand tools, Hard gauges, Surface Plate Flatness etc.
• Mechanical- Pressure, Vacuum, and Torque
• Electrical - Multimeters, Thermocouples and RTD's
• Chemical - Refractometers, pH Meters, and Conductivity meters etc.
• Sound level meters, Belt tensioners etc.
• Vision Systems
• Coordinate-measuring machine (CMM)

> Strong knowledge of measurement science (metrology)

• Understand contributors and variables that influence the development of an uncertainty budget.

> Ability to read and interpret technical manuals, blueprints, schematics and diagrams

Engage in Intra-laboratory and external laboratory Proficiency tests as needed. Not passing Proficiency tests may lead to corrective or preventative measures, including remedial training and/or restriction from calibrating certain types of gauges.

Attention to detail: Meticulous and precise, with a focus on accuracy.

Problem-solving: Strong analytical skills for troubleshooting and resolving complex issues

Computer skills: Proficiency with calibration software and other computer-based test equipment

Communication: Ability to clearly communicate technical information and work effectively in a team. Collaborate with Plants regarding processes, procedures, and corrective/preventative actions, when gauges are found to be out of tolerance.

Understanding of standards: Experience with quality and regulatory standards (e.g., ISO 17025, ISO 9001)

Associate degree or Certificate from a technical school or military training

ASQ Certified Calibration Technician Certification is a plus.

Ready to Shape the Future of Innovation?

Michelin is building a world-leading manufacturer of life-changing composites and experiences. Pioneering engineered materials for more than 130 years, Michelin is uniquely positioned to make decisive contributions to human progress and a more sustainable world. Drawing on its deep know-how in polymer composite materials, Michelin is constantly innovating to manufacture high-quality tires and components for critical applications in demanding fields as varied as mobility, construction, aeronautics, low-carbon energies and healthcare.

The care placed in its products and deep customer knowledge inspire Michelin to offer the finest experiences. This spans from providing data- and AI-based connected solutions for professional fleets to recommending outstanding restaurants and hotels curated by the MICHELIN Guide.

Why Michelin?

• Career Growth: Personalized development plans, mentorship, and cross-functional opportunities. Unique career paths and opportunities for advancement.

• Inclusive Culture: Thrive in a diverse, supportive environment where your competencies, contributions and behaviors are recognized. Option to join one of our Connected Communities.

• Innovation-Driven: Work on projects that matter-from sustainable materials to digital transformation.

• Community Impact: Be part of a company that does what's right. We use sustainable business practices while balancing the needs of our customers and communities.

Michelin provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, sex (including pregnancy, gender identity, and sexual orientation), parental status, national origin, age, disability, genetic information (including family medical history), political affiliation, military service, or other non-merit-based factors. Consistent with these obligations, Michelin also provides reasonable accommodations to employees and applicants with disabilities and for sincerely held religious beliefs. If you need accommodation for any part of the employment process because of a disability, please contact us at .

This position is not available for immigration sponsorship.

We build the future with people like you. Begin your career with Michelin today!

• Set up, adjust, and operate a variety of machine tools to produce precision parts and instruments
• Read and interpret engineering drawings and blueprints and follow their instructions
• Machine parts out of metal
• Properly and safely select, align, secure, and remove holding fixtures, cutting tools, attachments, accessories, and materials onto machines
• Recognize, deploy, and properly use inserts, fixtures, and tooling
• Must be able to determine the proper tools required to perform given task
• Operate and utilizes lifting aids as necessary to perform work
• Use gauges and precision measuring instruments to meet tolerance requirements
• Perform daily, regular cleaning and light maintenance tasks on machinery and equipment
• Perform all tasks in a safe and responsible manner while maintaining safe and clean working environment by complying with procedures, rules, and regulations
• Work overtime as needed on evenings and/or weekends
• Communicates with others to coordinate work in plant
• Other duties as assigned

• Familiarity with the use of: Heavy Duty Horizontal Lathes, Milling Machines, Horizontal Boring Mills, Vertical Turning Lathes, Planers, Grinders, Drill Presses, Hydraulic Presses, Band Saws, and Portable Tools
• Turning, Drilling, Tapping, Boring, Honing, Polishing machine processes
• Large part machining experience preferred (ship propeller shafting, ship steering gear, etc.)
• In-place machining experience is desired
• Forklift and Crane experience preferred

• Medical, Dental and Vision Insurance
• Company provided Medical Clinic/Pharmacy access
• 401K with company match
• Paid Time Off
• Short Term Disability and basic Life Insurance provided by company
• Supplementary Insurance: Accident, Critical Illness, Voluntary Life/AD&D, and Long Term Disability available
• Employee Assistance Programs

• High school diploma or GED
• 3 to 5 years of related experience is preferred.
• Language skills - effectively communicate and understand job instructions verbally and written in English
• Ability to effectively interpret and translate instructions to other employees in a professional and respectful manner
• Ability and willingness to learn
• Ability to define problems, collect data, establish facts, and draw valid conclusions
• Ability to interpret various technical instructions in mathematical or diagram form and deal with several abstract and concrete variables
• A strong, proven interest in engineering and mechanical systems
• Ability to read and interpret blueprints
• Ability to read precision measuring tools
• Ability to perform basic mathematical computations
• Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations
• Ability to work independently and as part as a team
• Basic understanding of Microsoft Word and Excel

• Ability to move or transfer products with an overhead crane
• Ability to lift and move up to 50 lbs. at a time when required
• While performing the job duties, the employee is regularly required to stand, walk, reach overhead with hands and arms, stoop, crouch, kneel, climb ladders, and use stairs
• Specific vision abilities required by this job include close vision, distance vision, color vision, depth perception, and the ability to adjust focus
• The employee will also be expected to spend time using a computer

• 
  
• Program, set up, and operate CNC press brake and laser equipment
  
• Proficiently interpret drawings and work packages while maintaining attention to detail and understanding precision tolerances.
  
• Operate manual machines such as lathes, mills, drills and machinist hand tools.
  
• Measure precision parts using calibrated instruments.
  
• Fabricate new parts or repair existing ones as needed in manufacturing processes
  
• Troubleshoot minor programming and mechanical issues as needed
  
• Understand and operate conversational milling machines and Acu-Rite digital readouts.
  
• Work with various materials to produce high-quality products that meet drawing specifications.
  
• Review samples, drawings, or instructions to understand output specifications.
  
• Plan the sequence of necessary actions to complete a job.
  

• 
  
• High School Diploma or equivalent
  
• Minimum 6 years of experience in CNC Press brake/laser operation in a manufacturing setting
  
• Basic understanding of precision sheet metal, encompassing flat layouts, bend deductions, and related machine tooling
  
• Skilled in fabricating, fitting, and assembling precision parts per drawings
  

• 
  
• Proficient in installing threaded inserts and various hardware components into parts
  
• Excellent attention to detail.
  

Company Overview

Hamilton Company is a worldwide leader in the design and manufacture of manual, semi-automated and robotic products for precision fluid measuring. We specialize in the development, manufacturing and customization of precision measurement devices, automated liquid handling stations, and sample management systems. For more than 60 years, Hamilton has been satisfying customer needs by combining quality materials with skilled workmanship, ensuring the highest level of performance of every precision fluid measuring device we manufacture.

Responsibilities

Hamilton Company is looking for a CNC Operator to work with our team. Under the direction of a supervisor and/or experienced machinist, they will perform various tasks associated with the manufacture of a multitude of machined parts to ensure a defect-free product. The CNC Operator will be responsible for quality parts produced on CNC machines such as but not limited to lathes and milling machines.

Swing shift: Monday - Friday, 3:30pm - 12:00am

Pay: $23 -$40 per hour

Other responsibilities may include:

* Loading parts, proving tapes, operating controls, setting offsets and inspection of quality parts for conformance to requirements

* Studies and interprets drawings, manuals, specifications or sample parts to determine dimensions and tolerances of finished workpieces, the sequence of operations and setup requirements

* Keeping equipment and work area clean and orderly and perform basic preventative maintenance functions on equipment

* Within the scope of the job requirements, will be required to adhere and comply with state and federal law, the Company ISO Quality Program and procedures, Company policies and Safety and Environmental Regulations

* May perform other duties as assigned by supervisor

Qualifications

* Intermediate knowledge and application of precision measuring instruments and the application of such instruments such as calipers, ID and OD micrometers, depth gages, indicators and scales

* Intermediate knowledge of reading drawings and specifications with an intermediate understanding of geometric tolerancing and dimensions

* Intermediate knowledge of tool holders, cutting tools, boring bards, fixtures, inserts and other accessories used on various machines

* Must be able to follow written and oral instructions

* Must be adaptable to a changing work environment, competing demands and is able to deal with frequent change, delays or unexpected events

* Must be willing and able work flexible shifts and changing work schedules

* Must possess basic math skills

Education/Experience

* Must have a High School diploma or equivalent.

* Minimum of 3 - 5 years' experience operating CNC machines such as lathes and milling machines in a heavy manufacturing environment

About Hamilton

* Diverse portfolio of exciting and innovative design projects

* Tremendous opportunities for professional growth

* Commitment to sustainable design

* Competitive Compensation

* Excellent Benefits Package includes medical, dental, vision insurance, paid vacation time, paid sick time, disability insurance, 401k, tuition reimbursement and much more

* Solid Stable Company

* Drug-free workplace

Mid Salary

Dover Precision Components is hiring a Key Account Manager (OEM customers) for our Inpro/Seal brand. We are a world leader in the design and manufacture of permanent bearing protection and complete shaft sealing solutions for a variety of rotating equipment across multiple industries.

In this role, you will increase penetration in existing OEM accounts as well as identify new markets and customers. You will effectively interface with customers at multiple levels (technical, commercial, and management) and deliver the value propositions of an engineered solution. If you are a results-driven engineered product sales professional with a record of achievement demonstrating initiative and business ownership, we’d love to hear from you!

What You’ll Do

• Develop broad and deep relationships with OEM customers' management, procurement, and engineering staff to advance the company's value proposition and share of wallet.
• Move customer relationships forward to increase engagement across the organization. Ensure position as value provider vs. commodity supplier, and, where appropriate, drive to achieve "Trusted Advisor" status.
• Understand and align with the market drivers and strategy of major customers, while also providing feedback to the management team that will help inform the company's strategies for growth.
• Provide regular and insightful customer and market feedback to the management team for business and market planning.
• Ensure the company is first positioned to capture new design opportunities.
• Oversee the development of conceptual solutions by the engineering team and lead the presentation of proposals to customer personnel.
• Maintain an understanding of competitive landscape and position and implement the appropriate pricing strategies.
• Acquire and submit forecast information based on customer business indicators and planning.
• Facilitate all communications to ensure the company provides customer intimacy at a level that ensures continuing selection as the #1 choice for bearing needs.
• Utilize Lean techniques for analyzing and improving process/workflow to continually improve service delivery.
• Develop new opportunities by researching within the assigned territory and revisiting dormant accounts to identify potential customers.
• Through efficient prospecting and discovery, screen and identify opportunities that fit the company's strategy and objectives developing those prospects through pre-sales, negotiation, and support phases.
• Balance both own workload and supporting departments to prioritize customer opportunities for maximum growth.
• Travel up to 25% on a national basis.

What You’ll Bring

• Bachelor's degree required, BS Mechanical Engineering preferred.
• A minimum of three (3) years' experience in outside sales of highly engineered products is required.
• Experience with sales in turbomachinery applications, rotating equipment (pumps, compressors, turbines, etc.) or reciprocating compressor components strongly preferred.
• Demonstrated ability to establish and maintain long term OEM customer relationships which culminate in the goal of ensuring/ reaching "Trusted Advisor" status.
• Demonstrates confidence, technical aptitude, and business ownership as a self-starter.
• Strong analytical and problem-solving skills.
• Excellent written and oral communication skills, coupled with the ability to manage a consultative sales process.
• Experience in an environment of continuous improvement that includes the use of tools such as process analysis, Kaizen, and Lean techniques.
• Demonstrated ability to inspire and develop collaboration amongst cross-functional teams.
• Ability to travel on a national basis, up to 25%.

DOVER PRECISION COMPONENTS

Dover Precision Components ‘DPC’ (‘the Company’) is part of Dover Corporation’s (‘the Parent Company’) Pumps and Process solutions segment. DPC holds market leading positions globally and delivers performance-critical solutions across the oil & gas, power generation, marine, industrial, chemical and general processing markets. We design and manufacture mission-critical equipment components to deliver more affordable, cleaner energy solutions and enable manufacturers to operate more efficiently.

WE DELIVER CUSTOMER SUCCESS

Dover Precision Components delivers products and services that enhance performance, improve safety, reduce carbon emissions, and accelerate clean energy adoption, through collaborative Customer relationships, expert engineering, and an innovative culture. Our strong Company portfolio is comprised of long products and services offered under Cook Compression, Cook Mechanical Field Services, Waukesha Bearings, Waukesha Magnetic Bearings, Inpro/Seal, Bearings Plus, and FW Murphy Production Controls. Our global footprint reaches more than twelve locations in the Americas and more than six locations in Europe and China.

BUILDING POTENTIAL. SUSTAINING PERFORMANCE. BOOSTING FUTURES.

We are diligent in recognizing our employees’ needs and providing an enriching experience through professional developmental opportunities. Our authentic, collaborative company culture, combined with a competitive suite of health and welfare offerings, emulates who we are.

Work Arrangement: Remote

Pay Range: $130,000- $145,00 base salary. Bonus Eligible.

We consider several job-related, non-discriminatory factors when determining the pay rate for a position, including, but not limited to, the position’s responsibilities, a candidate’s work experience, a candidate’s education/training, the position’s location, and the key skills needed for the position. Pay is one of the Total Rewards that we provide to compensate and recognize employees for their work.

Benefits: Our total rewards package for eligible team members also includes: a 401(k) savings plan with employer contributions; medical, dental and vision insurance; wellness programs; health savings account, health care and dependent care flexible spending accounts; company paid short-term disability and long-term disability; company paid employee basic life and AD&D insurance; supplemental employee and dependent life insurance; optional accident, hospital indemnity and critical illness insurance; adoption, surrogacy, and fertility benefits and assistance; commuter benefits; parental, military, jury duty, and bereavement leaves of absence; paid time off, including 9 paid holidays per calendar year, 15 paid vacation days annually, prorated the first year based on hire date, 16 hours floating holiday; wellness reimbursement, tuition reimbursement ;business travel services; employee discounts; and an employee assistance program that includes company paid counseling sessions and legal services. Eligibility for benefits is governed by applicable plan documents and policies.

All qualified applicants will receive consideration for employment without discrimination on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status, disability, age, genetic information, or any other factors prohibited by law.

Attention Applicants: If you are an individual with a disability and require a reasonable accommodation to complete any part of the application process, please let us know. Likewise, if you are limited in the ability to access or use this online application process and need an alternative method for applying, we will determine an alternate way for you to apply. Please contact assistance with an accommodation. Kindly specify Job Requisition Number / Job Title and Location in response.

Quality Control Manager – Machine Parts

Location: West Chester, Pennsylvania

Industry: Precision Medical Device Manufacturing

Job Type: Full Time | 100% Onsite

Shifts: 1st (7:00am–3:30pm), 2nd (3:00pm–11:30pm)

Position Overview

Leads quality control activities for precision-machined medical device components. Responsible for inspection planning, First Article and in-process inspections, nonconformance management, ISO compliance, ERP tracking, and mentoring quality staff across machining cells and shifts.

Core Responsibilities

• Develop and oversee inspection plans across machining cells
• Perform and review First Article Inspections and in-process inspections
• Lead nonconformance investigations, MRBs, and corrective actions
• Maintain ISO 9001 and ISO 13485 compliance
• Track quality data and documentation within ERP systems
• Train and mentor inspectors and machinists on quality standards
• Support internal audits and calibration programs

Must-Have Qualifications

• 5+ years quality experience in precision machining environment
• Strong blueprint reading and GD&T knowledge
• Experience performing FAIs and in-process inspections
• Experience managing nonconformance and corrective actions
• Familiarity with ISO 9001 and ISO 13485 systems
• Ability to mentor and train quality personnel

Preferred Qualifications

• CNC or Swiss machining background
• Experience supporting audits and calibration programs
• ERP system experience in manufacturing setting
• Engineering degree or equivalent hands-on experience

Work Environment & Process

• Precision, climate-controlled medical device facility
• Regulated and quality-driven environment
• Uniforms and safety equipment provided at no cost
• Overtime based on production demands
• Interview process includes virtual interviews, onsite visit, and skills assessment

Company Description

Americase specializes in designing and manufacturing advanced protective containers for high-value and hazardous materials. Focused on innovative problem-solving, the company delivers customized solutions to meet unique customer requirements and challenges. Each container is crafted with precision and undergoes rigorous testing in in-house laboratories to ensure superior functionality, ruggedness, and reliability. Americase's commitment to excellence makes it a leader in providing smart, efficient, and effective protective solutions in the industry.

Leadership Hire: Director of Manufacturing – Drive Operational Excellence at Americase!

We're elevating our leadership team in Waxahachie, TX. As CEO, I'm personally seeking a proven Director of Manufacturing to own end-to-end operations in our precision sheet metal fab and custom case business. This is a high-impact, executive role reporting directly into leadership—full responsibility for all production processes, planning, scheduling, throughput, team performance, and scaling our state-of-the-art facility.

The must-have: Deep, hands-on experience implementing Operational Excellence—specifically designing and deploying Mixed Model Value Streams to create autonomous flow in high-mix, complex manufacturing environments. If you've led transformations where employees see/fix value flow in real time, reduced lead times dramatically, and built self-healing systems, this is your opportunity to apply it at a growing, innovative company.

Key Scope:

• Lead all manufacturing ops: precision sheet metal manufacturing, assembly, scheduling, shop floor control, inventory, costing accuracy via ERP
• Champion OE transformation: Engineer mixed-model value streams for custom/high-mix production
• Build high-performance teams: Coaching, development, accountability in a collaborative culture
• Drive metrics & growth: Throughput, OTD, margins, waste elimination, continuous improvement
• Strategic partner: Collaborate with leadership team on ERP optimizations, audits, scalability

Requirements:

• 10+ years progressive manufacturing leadership (Director/VP level preferred)
• Proven track record implementing OE model, including Mixed Model Value Streams in complex fab/assembly settings
• Strong manufacturing background (sheet metal, CNC/automation, custom production a plus)
• Experience with ERP/MES/shop floor systems (Mie Trak Pro or similar)
• Bachelor's in Engineering/Manufacturing/related; Lean/Six Sigma certs advantageous
• On-site in Waxahachie, TX

What We Offer:

• Executive compensation package (competitive base + bonus + benefits)
• Growth potential in a stable, expanding company
• Direct impact: Shape our future ops in precision custom manufacturing

This role demands rare expertise—true Operational Excellence practitioners who can turn complex ops into flow powerhouses. If this is you (or you know the ideal leader), DM me your resume/confidential intro directly—Robby Kinsala, CEO. Serious, discreet conversations only; we're selective and moving with purpose.

Qualifications:

• Strong expertise in Production Planning and Manufacturing Operations
• Experience in Manufacturing Operations Management
• Knowledge and hands-on experience in Supply Chain Management and logistics
• Excellent leadership and team management skills
• Proven ability to analyze processes and drive operational improvements
• Exceptional problem-solving and critical-thinking abilities
• Bachelor's degree in Engineering, Industrial Management, Manufacturing, or a related field
• Previous experience in the manufacturing or industrial sector

#Hiring #ManufacturingLeadership #DirectorOfManufacturing #OperationalExcellence #KevinDuggan #MixedModelValueStreams #LeanManufacturing #SheetMetal #TexasJobs #Waxahachie #PrecisionManufacturing

Quality Control Roving Inspector

Location: West Chester, Pennsylvania

Industry: Precision Medical Device Manufacturing

Job Type: Full Time | 100% Onsite

Shifts: 1st (7:00am–3:30pm), 2nd (3:00pm–11:30pm)

Relocation: Available case by case

Position Overview

Performs in-process and final inspections across multiple machining cells. Acts as a floor-level quality resource supporting machinists and inspectors to maintain quality standards within a regulated medical device environment.

Core Responsibilities

• Perform in-process and final inspections across machining cells
• Support machinists and production teams with quality questions
• Inspect parts using calipers, micrometers, comparators, and other precision tools
• Identify and document nonconformances
• Support corrective actions and quality improvements
• Ensure compliance with ISO 9001 and ISO 13485 standards

Must-Have Qualifications

• 5+ years quality experience in precision machining environment
• Strong blueprint reading and GD&T knowledge
• Experience performing in-process and final inspections
• Proficiency using calipers, micrometers, and comparators
• Working knowledge of ISO 9001 and ISO 13485 standards
• Strong communication and problem-solving skills

Preferred Qualifications

• CNC or Swiss machining background
• Experience generating NCRs and supporting corrective actions
• Experience mentoring inspectors or production staff
• Quality certifications such as CQT, CQI, or Six Sigma

Work Environment & Process

• Precision, climate-controlled medical device facility
• Regulated and quality-driven environment
• Uniforms and safety equipment provided at no cost
• Overtime based on production demands
• Interview process includes virtual interviews, onsite visit, and skills assessment

Senior Manufacturing Engineer – Precision Solenoid Valve Products

Westbrook, CT | Onsite

I’m currently working with a highly respected precision manufacturer that is looking to add a Senior Manufacturing Engineer to their team in Westbrook, Connecticut.

This role supports the production and continuous improvement of miniature solenoid valve products used in highly demanding applications.

The engineer in this position will play a key role in developing and improving manufacturing processes, supporting new product introductions, and driving process improvements that enhance quality, efficiency, and reliability.

While this position does not include direct supervisory responsibility, it does require strong technical leadership and the ability to influence cross-functional teams across engineering, quality, and operations.

Key areas of focus include:

• Manufacturing process development and optimization

• Supporting new product introductions and process transfers

• Root cause analysis and troubleshooting of production challenges

• Continuous improvement of yield, quality, and throughput

• Collaboration with engineering and operations teams to implement process improvements

Ideal background:

• Bachelor’s degree in Mechanical, Manufacturing, Industrial Engineering, or similar

• 7+ years of manufacturing engineering experience

• Experience supporting precision components, electromechanical assemblies, or fluid control products

• Strong hands-on problem-solving and process improvement skills

This is a great opportunity for someone who enjoys hands-on manufacturing engineering and technical leadership in a precision production environment.

Manufacturing Engineer | Precision Optics | Medical Device Manufacturing

A growing global medical device manufacturer focused on advanced ophthalmic technology is seeking a Manufacturing Engineer to support precision optical lens fabrication and assembly operations. This role partners closely with engineering, quality, and production teams to improve manufacturing processes, support production, and drive continuous improvement across the operation.

This is an opportunity to work on highly precise products that support vision care while contributing to process innovation and manufacturing excellence.

Key Responsibilities

• Develop, document, and optimize manufacturing processes for precision optical lens fabrication and assembly

• Develop and maintain metrology processes used to measure optical lens assemblies in production

• Partner with optical design engineers to ensure designs are manufacturable at scale

• Collaborate with cross functional teams to support quality and long term product reliability

• Lead manufacturing improvements including sourcing equipment and establishing new processes

• Provide day to day production floor support by troubleshooting build issues and improving yields

• Work with optical component suppliers to optimize product delivery and qualify new suppliers or components

• Create detailed manufacturing work instructions and process validation documentation

• Implement new manufacturing technologies and automation aligned with business goals

• Design tools and fixtures to improve manufacturing efficiency

• Develop manufacturing approaches for optical components using existing or newly proposed equipment

• Conduct root cause analysis and troubleshoot equipment or process failures on the production floor

• Drive continuous improvement related to process efficiency, yield, production rates, and cost

• Maintain project documentation and communicate updates during project status meetings

• Apply Lean manufacturing principles to reduce variability and improve yield

• Support capital equipment planning, evaluation, and implementation

• Maintain compliance with quality systems and medical device regulations

Minimum Requirements

• Bachelor’s degree in an engineering discipline

• 5+ years of experience as a Manufacturing Engineer

• Experience designing and implementing machines, equipment, or manufacturing processes in production environments

• Hands on problem solver able to work independently with minimal supervision

• Strong time management and ability to manage competing priorities

• Knowledge of Lean manufacturing practices and principles

• Experience with root cause analysis techniques

• Strong analytical and troubleshooting skills

• Ability to read and interpret engineering drawings

• Strong written and verbal communication skills across multiple organizational levels

• Familiarity with ISO standards and quality systems

• Experience driving productivity or cost savings initiatives

• Strong collaboration, influence, and change management skills

• Experience developing or optimizing Bills of Materials and manufacturing routings

• Basic project management experience

Preferred Qualifications

• Experience with optical manufacturing processes such as grinding and polishing

• Hands on experience working in an aspheric optical manufacturing environment

• Familiarity with optical metrology equipment such as interferometers

• Experience with machine programming

• Experience using statistical analysis tools such as Minitab

About Chiral Photonics

Chiral Photonics is a fast-growing photonics manufacturing company enabling next-generation optical connectivity. We specialize in high-precision fiber-optic components and assemblies that support advanced data center, AI, and communications infrastructure. As we scale production, we are building strong operational foundations rooted in standard work, quality, and continuous improvement.

Role Overview

The Production Floor Manager owns the day-to-day execution of manufacturing operations on the production floor. This role is responsible for meeting daily and weekly production goals, ensuring adherence to SOPs and work instructions, maintaining a clean and organized floor, and supporting production teams through hands-on leadership, equipment troubleshooting, and close collaboration with Production Director, Operations, Engineering and R&D teams.

This is a highly visible role critical to scaling output while maintaining Chiral’s high standards for precision, quality, and safety.

Key Responsibilities

Production Execution & Performance

• Lead daily production floor operations, ensuring work is executed according to plan and priorities.
• Own achievement of daily and weekly output targets (e.g., standard orders, batch completion, on-time delivery).
• Track and manage key production metrics such as:
• Units completed per day/week
• WIP levels by process step
• Throughput and cycle time
• Rework and defect trends
• Participate in and lead daily production huddles and weekly planning reviews.
• Ensure every technician has a work order and all parts are ready in advance of their scheduled shift. 
• Work closely with Operations Planning Coordinator to review forecasted plans and targets. 

Team Management

• Directly manage and support a production team of approximately 10-15 technicians (scaling over time).
• Provide clear daily direction, prioritize work, and rebalance resources as needed to meet goals.
• Coach technicians on standard work, quality expectations, and safe operating practices.
• Support onboarding and training of new production staff in partnership with Operations
• Review timecards for accuracy and completeness 

Standard Work, Quality & Compliance

• Ensure strict adherence to SOPs, work instructions, and quality controls across all production activities.
• Enforce discipline around WIP management, including labeling, tracking, storage locations, and FIFO practices.
• Identify deviations from standard work and drive corrective actions.
• Maintain a clean, organized, and audit-ready production floor (5S mindset).

Equipment & Troubleshooting Support

• Act as first-line support for equipment issues and production interruptions.
• Troubleshoot common equipment and process issues alongside technicians.
• Escalate complex issues appropriately and coordinate with Process Engineering and Operations.
• Help minimize downtime and ensure fast recovery to standard operations.

Process Improvement & Cross-Functional Collaboration

• Partner closely with Process Engineering to identify bottlenecks, yield issues, and improvement opportunities.
• Contribute ideas and data to drive process optimization, efficiency gains, and defect reduction.
• Support pilot changes, new process introductions, and scaling initiatives on the production floor.
• Provide structured feedback from operators to operations to be triaged for action with process / engineering / R&D.

Safety & Housekeeping

• Promote and enforce a safe working environment at all times.
• Ensure compliance with safety procedures, PPE requirements, and cleanliness standards.
• Address safety or housekeeping issues immediately and proactively.

Qualifications

• 10+ years of experience supervising or leading manufacturing operations (precision manufacturing, photonics, optics, electronics, or similar preferred).
• Strong understanding of production workflows, SOP-driven environments, and WIP control.
• Hands-on leadership style with the ability to work directly on the floor.
• Experience supporting equipment troubleshooting and process adherence.
• Strong communication skills and comfort working cross-functionally with engineering and operations.

Preferred Experience

• Experience in fiber-optic, photonics, semiconductor, medical device, or other high-precision manufacturing environments.
• Familiarity with lean manufacturing, 5S, or continuous improvement methodologies.
• Experience scaling production from low-volume to higher-volume operations.

Job Title: Quality Assurance & Compliance Manager (Aerospace / Precision Machining)

Department: Quality

Reports To: General Manager / Director of Operations

Location: Southampton, MA

FLSA Status: Exempt

Position Summary

Responsible for leading the Quality Management System (QMS) and ensuring compliance with aerospace, defense, and customer requirements. Oversees ISO 9001 / AS9100 certifications, audits, inspection processes, documentation, and traceability within a precision machining or aerospace manufacturing environment.

Key Responsibilities

• QMS & Continuous Improvement
• Manage and improve the QMS in compliance with ISO 9001 and AS9100.
• Maintain procedures, work instructions, and document control.
• Lead CAPA, root cause analysis, and continuous improvement initiatives.
• Track and report quality performance metrics.

Certification & Compliance

• Maintain ISO 9001 / AS9100 certifications and audit readiness.
• Coordinate third-party and customer audits.
• Ensure compliance with customer flow-downs and contract requirements.
• Monitor and implement regulatory/standards updates.
• Aerospace & Defense Quality
• Ensure compliance with AS9102 FAIRs, traceability, and special process controls.
• Support ITAR/EAR and DFARS requirements as applicable.
• Maintain material, process, and certification records.
• Coordinate with NADCAP-approved suppliers.

Inspection & Production Support

• Oversee inspections to drawings, GD&T, and specifications.
• Manage calibration of inspection equipment.
• Control travelers/routers and in-process/final inspection records.
• Support production in resolving nonconformances.

Audits & Supplier Quality

• Conduct internal audits and manage corrective actions.
• Support supplier qualification, monitoring, and audits.
• Ensure timely closure of audit findings.

Customer Quality

• Interface with customers on quality issues and audits.
• Manage portal submissions and reporting.
• Oversee FAIRs, PPAPs, and required documentation.

Training & Leadership

Train staff on quality and compliance procedures.

Promote a culture of quality and traceability.

Advise production, engineering, and purchasing on requirements.

Qualifications

Required

• Bachelor’s degree in Quality, Engineering, Manufacturing, or related field (or equivalent experience).
• 5+ years in aerospace, defense, or precision machining quality.
• Experience with ISO 9001 / AS9100 systems.
• Proficiency in GD&T, blueprint reading, audits, and root cause analysis.

Preferred

• CQE, CQA, or ASQ certification.
• CNC machining / precision manufacturing experience.
• ERP / QMS system familiarity (Epicor a plus).
• Experience with aerospace primes or Tier suppliers.

Skills & Competencies

• Analytical problem-solving.
• Strong documentation and organization.
• Effective auditor/customer communication.
• Detail-oriented with regulatory focus.
• Ability to manage multiple priorities.

Work Environment & Metrics

• Office and shop-floor presence.
• Interaction with production, suppliers, and customers.
• Occasional audit/customer travel.

Success Measured By:

• Certification maintenance.
• Audit results and corrective action closure.
• Reduced nonconformances.
• On-time FAIRs and documentation.
• Supplier and customer quality performance.

Mold Maker (A or B) – Injection Molding Tooling

Worcester County | Direct Hire

Our client, a global manufacturer of high-power electrical connector solutions, is seeking experienced Mold Makers to join their Tool Room team in Worcester County, Massachusetts. These positions focus on building, repairing, and maintaining precision injection molds used in high-volume manufacturing.

This is a strong opportunity for experienced toolmakers, mold makers, or injection mold technicians who enjoy precision machining and working with complex tooling.

Key Responsibilities of Toolmaker:

• Build, repair, and modify precision injection molds and tooling used in production

• Operate and troubleshoot equipment including CNC machines, EDM, mills, grinders, and manual machining equipment

• Work from engineering drawings, CAD/CAM models, and blueprints to fabricate mold components

• Diagnose tooling issues and perform mold maintenance to support production uptime

• Use inspection tools and gauging equipment to maintain tight tolerances

Qualifications of Toolmaker:

• Experience with injection mold fabrication, mold repair, or tool & die work

• Hands-on experience with CNC machining, EDM, grinding, and manual machining equipment

• Ability to interpret technical drawings and CAD/CAM models

• Experience working in a tool room, plastics manufacturing, or precision machining environment

If you have experience building or repairing injection molds and are looking for a stable, highly skilled tool room environment, apply today or message me directly for more information.

CNC Swiss Machinist

Location: Hudson, NY

Shift: 1st (6 AM - 3 PM)

Industry: Precision Manufacturing / CNC Machining

Employment Type: Full-Time

Position Overview

we are currently recruiting for an experienced CNC Swiss Machinist on behalf of one of our manufacturing clients. This role is ideal for a skilled machinist who can independently set up, operate, and adjust CNC machining centers while maintaining high standards for quality, safety, and productivity.

The successful candidate will work with minimal supervision, interpret complex blueprints, select appropriate tooling, and ensure precision machining of components in a fast-paced manufacturing environment.

Key Responsibilities

• Set up and operate CNC milling machines
• Perform machine adjustments and troubleshoot CNC controllers, tooling, and machining processes
• Read, interpret, and work from detailed blueprints, drawings, and work instructions
• Select appropriate cutting tools, fixtures, and work holding devices
• Set and optimize feeds, speeds, offsets, and tool paths to ensure quality and efficiency
• Perform in-process and final inspection of machined parts using precision measuring instruments (micrometers, calipers, height gauges, etc.)
• Maintain dimensional accuracy and surface finish requirements per print specifications
• Work independently with minimal supervision while meeting production schedules
• Assist with continuous improvement efforts related to machining efficiency and quality
• Maintain a clean, organized, and safe work environment, including machines, tools, and shop floor
• Monitor tool wear and re-order tooling as needed to prevent production downtime
• Follow all company safety policies and quality standards

Qualifications & Requirements

• High School Diploma or GED required
• 2–3 years of hands-on experience in CNC Swiss
• Strong knowledge of CNC machining principles and milling processes
• Ability to read and interpret blueprints and GD&T specifications
• Experience using precision inspection tools for dimensional verification
• Comfortable working independently and taking ownership of assigned machines and jobs
• Ability to lift up to 70 lbs and perform physical tasks associated with machining operations

Machinist – Level III

Arundel, ME

Position Overview

A manufacturing organization is seeking a Level III Machinist to produce precision components and tooling using a variety of manual and CNC machining equipment. This role involves interpreting complex blueprints, drawings, and verbal instructions to manufacture medium- to high-complexity parts while maintaining strict dimensional tolerances and quality standards. The Machinist may also support prototype development and collaborate with engineering teams on new product and process improvements.

Key Responsibilities

• Set up, operate, and maintain CNC milling and turning centers in accordance with detailed blueprints, job routings, and work instructions.
• Review and retrieve job-related documentation, including part drawings, tooling lists, and manufacturing instructions.
• Select appropriate cutting tools, fixtures, and workholding methods for a variety of materials and machining operations.
• Perform complex machining operations for both proven and unproven parts, including prototype and experimental work as required.
• Install, align, secure, and adjust cutting tools and workpieces; monitor machine feeds, speeds, and offsets to ensure optimal performance.
• Use precision measuring instruments (e.g., calipers, micrometers, gauges) to verify dimensions and maintain tight tolerances.
• Inspect finished parts for defects and ensure compliance with quality and specification requirements.
• Deburr and finish all machined surfaces to meet engineering and quality standards.
• Accurately document production quantities, inspection results, and required processes within an ERP or manufacturing system.
• Participate in continuous improvement initiatives to enhance machining efficiency, quality, and safety.
• Maintain a clean, organized, and safe work environment in compliance with all safety regulations.
• Assist with the development of new machining methods, tooling, or process improvements for complex components.
• Perform additional duties as assigned.

Qualifications

Experience & Education

• 6–8 years of hands-on machining experience in a manufacturing environment.
• High school diploma or equivalent, with additional technical or vocational training preferred.

Technical & Professional Skills

• Strong attention to detail and commitment to precision workmanship.
• Ability to interpret customer specifications, engineering drawings, and technical documentation.
• Proficiency with basic computer systems and manufacturing software.
• Solid problem-solving and troubleshooting skills.
• Proficient use of precision measuring tools, including calipers and micrometers.
• Strong mathematical skills, including fractions and basic arithmetic.
• Effective communication skills and the ability to work collaboratively in a team environment.
• Thorough understanding of workplace safety requirements and best practices.
• Commitment to maintaining a clean and organized work area.

Physical Requirements

• Ability to lift and/or move materials weighing up to 50 pounds.
• Visual acuity including close vision, distance vision, depth perception, and the ability to adjust focus.
• Manual dexterity to handle tools, components, and equipment for extended periods.
• Ability to stand, walk, and perform repetitive tasks for prolonged periods of time.

Additional Information

• Supervisory Responsibilities: None
• Travel: Not required

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

As a Flexible Machining System (FMS) Operator you will have the opportunity to work with advanced CNC technology, ensuring precision and efficiency in the machining process. Your expertise will be essential in optimizing machine setups and operations, contributing to the production of high-quality components that meet stringent industry standards

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.

Position Responsibilities

• Prepare for job setup by reviewing work orders, tie-in sheets, operator documents, blueprints, or CATIA plots for production orders, first lots, or tool tryouts.

• Review Work Orders (W/O) to confirm the correct type and quantity of materials and tools or fixtures are issued and free from visible defects, updating CMES as necessary.

• Identify the type of setup required based on documentation and check machine setups or parts completed by previous operators to assess job progress and ensure safe working conditions.

• Select and verify the condition of machine accessories and holding devices (e.g., chucks, vises, templates) and identify any required fixtures or shop aids.

• Attach air nozzles or suction devices for vacuum fixtures, securing them with bolts or clamps as specified in the operator setup documents.

• Use overhead cranes to load and unload parts and fixtures as required for the machining process.

• Upload and download CNC (Computer Numerical Controlled) programs to machine controllers using computing equipment from various servers or databases.

• Select and check cutting tools according to program specifications, ensuring they are the correct type, length, diameter, and in good condition before installation.

• Set machine coordinates or index points per CNC documents, including cutter offsets, tool heights, and probes, using appropriate measuring tools.

• Run CNC programs to machine rough and precision cut parts, monitoring machine operations for unusual vibrations, sounds, or warning indicators.

• Adjust machine settings (e.g., speeds and feeds) to correct machining issues or prepare the machine for subsequent operations, including head and spindle angles.

• Troubleshoot and repair minor controller problems as required, and initiate requests for corrective action when machine malfunctions occur.

• Perform Statistical Process Control (SPC) functions as required to ensure quality standards are met.

• Check completed work for defects and ensure parts meet drawing specifications, removing sharp edges with deburring tools as required.

• Maintain personal and tool certifications and assist planners or programmers in determining final numerical control programs to optimize machine utilization and minimize setups.

Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.

• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.

• Work in environments that may involve contact with metals, solvents, and coolants.

• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.

• Adapt to varying noise levels and atmospheric conditions.

• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee

Resumes of current Puget Sound Boeing employees submitted via “Find Jobs” in Boeing/Workday will be considered as this job is not installed in QTTP (Quality Through Training Program).

Basic Qualifications

• 2+ years of experience setting up and operating Manual and CNC machines

• 2+ years of experience in setting and using precision measuring tools and equipment such as micrometers, calipers, and/or dial indicators

• 2+ years of experience using software applications for internet navigation, email, Microsoft Suite and/or other specialized computer applications

•  2+ years of experience working with powered hand tools

• Experience with reading and interpreting drawings, specifications, material processes, schematic and diagrams

• Must be able to lift, push and pull up to 35 pounds frequently within an 8-hour shift

Preferred Qualifications:

• Experience in Fabrication of airplane parts

• Experience in Fabrication of temporary tooling

Typical Education & Experience:

High school graduate or GED preferred.

Relocation:

• Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.

Drug Free Workplace

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement:

• This position is for a variety of shifts

Total Rewards & Pay Transparency:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.  Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.  

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.  

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay: $33.32/hour, with the potential to earn up to $61.01 /hour in accordance with the terms of the relevant collective bargaining agreement

Applications for this position will be accepted until Mar. 20, 2026

Language Requirements

English Preferred

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Contingent Upon Program Reward

The position is contingent upon program award

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for a Tool & Die Maker to join our Materials Management & Tooling team in Auburn and Renton, Washington.

In this hands-on position, you will be responsible for a variety of tasks, from interpreting blueprints and work orders to developing effective plans for tool fabrication and repair. Your skills will be essential in troubleshooting production challenges, operating advanced machinery, and ensuring that all tools meet stringent quality standards. Collaborating with cross-functional teams, you will also engage with customers and suppliers to address any functional issues, all while adhering to safety protocols and continuous improvement practices. If you are passionate about precision engineering and ready to make a significant impact in a fast-paced environment, we invite you to explore this exciting opportunity.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.

Position Responsibilities:

• Perform all functions related to tool fabrication, rework, and repair as required.

• Obtain work orders from the team leader or supervisor, determining assignments based on schedule dates and tool availability.

• Read work orders and blueprints to identify required tasks, tools, and equipment.

• Develop plans for the fabrication, maintenance, and repair of tools.

• Initiate and coordinate engineering change requests with internal support groups when necessary.

• Determine the sequence of tool fabrication work, troubleshoot issues, and develop solutions to production challenges.

• Access and utilize appropriate tool drawings, models, and specifications using available computing systems.

• Select and verify necessary equipment from the shop storage area, ensuring current tool certification.

• Perform repairs or replacements on tools as per Standing Tool Order (STO) Production Requests, and request rework orders if necessary.

• Layout holes, lines, and other tool features, and install or modify hydraulic, pneumatic, and vacuum tubes as required.

• Operate various machinery, including power saws, drill presses, and CNC machines, to shape materials and prepare details.

• Move materials and equipment using Powered Industrial Trucks (PIT) and overhead cranes as needed.

• Maintain accurate records of orders and coordinate tooling information with other shifts and departments.

• Handle hazardous materials in compliance with Boeing procedures, using appropriate personal protective equipment.

• Engage in continuous improvement practices to enhance quality, safety, and efficiency in tool and die work.

• Use precision measuring instruments, such as micrometers and gauges, to ensure accuracy in fabrication and repairs.

• Interface with customers and suppliers to incorporate changes or resolve functional and installation issues.

• Submit completed jobs to Quality Assurance and assist inspectors in performing necessary checks or measurements.

• Utilize mathematics, including algebra and trigonometry, to calculate dimensions and analyze Model Based Definition (MBD) for fabrication details.

• Conduct tool tryouts and make necessary adjustments to ensure production meets quality requirements and specifications.

Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.

• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.

• Work in environments that may involve contact with metals, solvents, and coolants.

• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.

• Adapt to varying noise levels and atmospheric conditions.

• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee

Resumes of current Puget Sound Boeing employees submitted via “Find Jobs” in Boeing/Workday will be considered as this job is not installed in QTTP (Quality Through Training Program).

Basic Qualifications:

• 5+ years of experience in repairing, maintaining, construction, and/or the inspection of tools, dies, jigs, powerfeed, etc.

• 5+ years of experience in machine shop processes, geometric dimensioning & tolerances, and machining capabilities of different types of materials.

• 2+ years of experience using complete set of toolmaker shop equipment (milling, lathe, precision, grinding, polishing, and fitting).

Preferred Qualifications:

• 5+ years of experience as a Tool & Die Maker.

• 2+ years of experience with hydraulics and pneumatics.

• Completed an approved Mold Maker or Tool and Die Maker state apprentice ship program and/or certified by the U.S.

• Ability to perform machining operations with a specified degree of accuracy and within a timely manner, maintain close and exacting tolerances and finish requirements ensuring highest quality workmanship on all tools, gages, and fixtures with minimal scrap.

• Capable of creating a repeatable setup and working to tolerances of +/-.0002" in controlled environment.

• Possesses 4 and 5 axis CNC skills for mill or lathe, and extensive knowledge of detail cutting tool geometry for different cutting tool types and materials.

• Ability to reverse engineer and manufacture mold components within time limitations

• Ability to read and write G and M code with CAM programming experience.

Conflict of Interest:

Successful candidates for this position must successfully complete the Company’s Conflict of Interest (COI) assessment process.

Typical Education & Experience:

High school graduate or GED preferred.

Relocation:

• This position offers relocation based on candidate eligibility.

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement:

• This position is for a variety of shifts

Total Rewards & Pay Transparency:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.  Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.  

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.  

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay: $40.00/hour, with potential to earn up to $62.45/hour in accordance with the terms of the relevant collective bargaining agreement.

Applications for this position will be accepted until Jul. 31, 2026

Language Requirements

English Preferred

Relocation

This position offers relocation based on candidate eligibility.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.