Precis Engineering Architecture Jobs in Usa

Under general and/or immediate supervision from higher level engineering staff, performs a variety of journey level technical drafting, office and field engineering work; and provides assistance and information to the public. May exercise functional and technical supervision over less experienced technical staff.
Position Snapshot/A Day in the Life: The Engineering Technician II performs routine drafting and technical engineering work in support of municipal infrastructure projects. Responsibilities include assisting with engineering design and planning, providing customer service, and performing technical office and field duties related to updating, maintaining, and analyzing the Public Works and Engineering Department's Geographic Information System (GIS) and utility infrastructure data. This position coordinates and conducts research, field data collection, and condition assessments of infrastructure assets, using GIS, database, and information management tools to support capital planning and ensure compliance with regulatory requirements.

Essential Functions

Engineering Technician II -This is the full journey level in the Engineering Technician series. Employees within this class are distinguished from the Engineering Technician I By the performance of the full range of duties as assigned including the moderately complex duties of drafting, office and field engineering work. Employees at this level receive only occasional instruction or assistance as new or unusual situations arise, and are fully aware of the operating procedures and policies of the work unit. This class is flexibly staffed and is normally filled by advancement from the I level, or when filled from the outside, requires previous work experience.

ESSENTIAL FUNCTIONS:Incumbent must have the ability to:

• Review and process tract maps, parcel maps, of line adjustments, grants of easement, and street right-of-ways for recordation.
• Verify fulfillment of conditions of approval for new subdivisions; perform on-site inspections to verify survey monuments related to parcel maps and lot line adjustments.
• Prepare and draft technical engineering plans for construction of streets, alleys, storm drains, water lines, and other public improvements.
• Provide public assistance at counter and over the telephone.
• Prepare quantity and cost estimates for engineering projects.
• Maintain a variety of maps and records including tract maps, parcel maps, lot line adjustments, easements, street and address changes.
• Review engineering plans to determine appropriate layout of construction projects.
• Perform on-site inspections to obtain information; determine angles and set grade stakes, hubs, turning points and benchmarks using appropriate surveying techniques; locate and measure boundary lines, right-of-ways, and land grades.
• Make and check mathematical calculations related to surveying, drafting and basic engineering.
• Maintain accurate survey records in the form of field notes and sketches.
• Participate in a variety of engineering design and planning work related to municipal engineering projects.
• Answer questions and provide information to the public concerning engineering activities.
• Assist in development and maintenance of the record keeping and filing systems.
• Prepare, assemble and distribute copies of maps, charts and blueprints.
• Answer questions and provide information to the public concerning engineering activities.
• Perform any other tasks or functions deemed necessary to the daily operations of the employer.

EXPERIENCE AND TRAINING GUIDELINES: A combination of experience and training that would likely provide the required knowledge and abilities is qualifying. The employee must have knowledge of:

Engineering Technician II: In addition the qualifications of Engineering Technician I, knowledge of:

• Terminology, methods, practices and techniques of drafting.
• Trigonometry as applied to the computation of angles, areas, distances and traverses.
• Elementary surveying techniques and practices.
• Engineering maps and records.

• Perform moderately complex engineering and mathematic calculations with speed and accuracy.
• Understand and follow written instructions and sketches.
• Use and care for drafting, surveying, and mechanical instruments and tools.
• Work independently in the absence of supervision.

The City of Fontana has a flexible benefits plan. This plan allows for employees to select benefits based upon their individual needs. Full-time and Classified Part-time employees are eligible for benefits.

Please to view our excellent employee benefit options.

• 
  
  
• High School graduate or equivalent
  
  
• Some college
  
  
• Trade school graduate or Apprenticeship
  
  
• Associate's degree in related field
  
  
• Bachelor's degree in related field
  
  
• Bachelor's degree or higher in non-related field
  
  
• Equivalent to Bachelor's degree in related field
  
  
• Master's degree or higher in related field
  
  
• None of the above
  
  

• 
  
  
• No experience
  
  
• Less than one (1) year.
  
  
• One (1) year or more year(s) but less than two (2) years.
  
  
• Two (2) or more years but less than four (4) years.
  
  
• Four (4) or more years but less than six (6) years.
  
  
• Six (6) years or more but, less than eight (8) years.
  
  

Required Question

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

The Boeing Company is looking for a Systems Engineering Senior Manager – Enterprise Regulatory Administration to join our team in Everett, Washington.

The Safety, Security & Airworthiness organization is seeking to fill a Senior Manager position within the Enterprise Regulatory Administration team. This position is responsible for teams associated with the administration, oversight, and support of the FAA appointed Boeing Organization Designation Authorization (ODA) Unit, including Engineering Unit Members, Inspection Unit Members, and Project Administrators who perform functions on behalf of the FAA. This includes overseeing the appointment, training, and annual assessment of the ODA Unit Members.  This role will provide technical leadership to support the communication and resolution of complex regulatory and compliance issues with the FAA and ODA unit members.

The ideal candidate has experience in leading cross-functional teams, integration across IPTs, certification, safety, and systems engineering. The candidate will have the ability to lead and influence other organizations (programs, functions), the ability to take ambiguous and complex topics and clearly communicate intent, and to plan and drive outcomes. Coordination with regulatory agency counterparts and internal stakeholders will also be central to this role.  

The successful candidate must be qualified, in accordance with FAA Order 8100.15, to be appointed by the FAA as an Administrator for the Boeing ODA unit.

This position manages a direct-reporting team of first-level managers and non-management employees performing engineering and technical activities in the Systems Engineering skill area. A successful applicant will thrive as an essential part of a collaborative environment that extends to external stakeholders, and will be able to successfully balance tactical business needs while working towards strategic goals.

Position Overview:

• Prepare certification documents and artifacts for submission to Regulatory Administration and FAA stakeholders; ensure artifacts are complete, traceable, and aligned to applicable requirements.
• Develops and executes integrated departmental plans, policies and procedures and provides input on departmental business and technical strategies, goals, objectives
• Acquires resources for department activities and leads process improvements
• Develops and maintains relationships and partnerships with regulatory authorities, customers, stakeholders, peers, partners and direct reports
• Provides oversight and approval of technical approaches, products and processes
• Manages, develops and motivates employees and first-level managers
• Establishes and implements team priorities and leads accomplishment of organizational objectives
• Creates a culture of continuous improvement and employee engagement to achieve organizational quality, productivity, and timeliness results

This position is expected to be 100% onsite.  The selected candidate will be required to work onsite at the Everett, WA site.

Basic Qualifications (Required Skills and Experience):

• Bachelor of Science degree in Engineering, Engineering Technology (including Manufacturing Technology), Computer Science, Data Science, Mathematics, Physics, Chemistry or non-US equivalent qualifications directly related to the work statement
• 5+ years of engineering experience
• 3+ years of experience as a leader or manager
• Experience and familiarity with certification processes and procedures and ODA and Applicant roles
• Currently or previously held an FAA ODA Unit Member or Administrator or FAA Designee appointment, or is able to readily obtain an FAA appointment

Preferred Qualifications (Desired Skills and Experience):

• Experience with FAA regulations, policies, and procedures applicable to the ODA functions
• 3+ years of experience working directly with the FAA and/or ODA on type Certification projects
• Bachelor’s degree or higher in Engineering, current engineering managers who do not have an engineering degree but have previous experience in a professional exempt engineering SJC classification will still be considered for exception
• Practical experience conducting analyses and studies for safety, system security, regulatory, certification, product assurance and other specialties to ensure mission success
• Excellent oral and written communication skills
• Proven ability to lead with the Boeing values & behaviors
• Proven ability in team building, coaching, and employee development
• Expertise in resolving cross-functional and cross-program technical and organizational issues
• Experience applying systems engineering and project management best practices

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Pay & Benefits:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay is based upon candidate experience and qualifications, as well as market and business considerations.

Summary Pay Range: $181,900 - $246,100

Applications for this position will be accepted until Mar. 24, 2026

Export Control Requirements:

This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a “U.S. Person” as defined by 22 C.F.R. §120.62 is required. “U.S. Person” includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee.

Export Control Details:

US based job, US Person required

Education

Bachelor's Degree or Equivalent Required

Relocation

This position offers relocation based on candidate eligibility.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for 1st shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

JOB SUMMARY
Industrial Engineering Manager will be responsible for planning, designing, implementing, and managing; integrated, productions and service delivery systems that assure performance, reliability, maintainability, schedule adherence and cost control within the production site. The Industrial Engineering Manager will adopt as its goals profitability, effectiveness, adaptability, responsiveness, quality, and the continuous improvement of products and services throughout their life cycles.

How will you make an impact?

• As the Test Engineering Manager, you will provide optimum test solutions and strategies through the effective management of people, systems, procedures, and equipment.
• You will drive innovation and continuous improvement within Test Engineering by harnessing innovative technologies in the areas of systems, equipment, and processes.
• As the Test Engineering Manager, you will also provide exceptional support to customers, team members, and shareholders.

What will you do ?

• Recruit, interview, and hire Assistant Test Engineering Managers.
• Communicate criteria to recruiters for Test Engineer and Test Management position candidates.
• Coach Test Engineering Managers in the interviewing/hiring process.
• Monitor team member turnover; identify key factors that can be improved; make improvements.

Employee and Team Development:

• Identify individual and team strengths and development needs on an ongoing basis.
• Create and/or validate training curriculum in area of responsibility.
• Coach and mentor Test Engineering staff to deliver excellence to every internal and external customer.
• Create and manage succession plans for Test Engineering and Test Management functions.

Performance Management:

• Establish clear measurable goals and objectives by which to determine individual and team results (i.e., operational metrics, results against project timelines, training documentation, attendance records, knowledge of operational roles and responsibilities, personal development goals).
• Solicit ongoing feedback from Workcell Manager (WCM), Business Unit Manager (BUM), peers, and team members on team member’s contribution to the Workcell team. Provide ongoing coaching and counseling to team members based on feedback.
• Express pride in staff and encourage them to feel good about their accomplishments.
• Perform team member evaluations professionally and on time.
• Drive individuals and the team to continuously improve in key operational metrics and the achievement of the organizational goals.
• Coordinate activities of large teams and keep them focused on times of crises.
• Ensure recognition and rewards are managed fairly and consistently in area of responsibility.

Communication:

• Provide communication forum for the exchange of ideas and information with the department.
• Organize verbal and written ideas clearly and use an appropriate business style.
• Ask questions; encourage input from team members.
• Assess communication style of individual team members and adapt own communication style accordingly.

Functional Management Responsibilities:

• Know and understand the campus strategic directions.
• Define, develop, and implement Test Engineering strategies which contribute to the campus strategic directions.
• Develop an understanding of the Workcell business strategy as it pertains to Test Engineering.
• Provide regular updates to BUM, WCM, and Operations Manager on the execution of the strategy.

Cost Management:

• Identify creative ways to reduce costs by streamlining processes and systems (i.e., modification of responsibilities or consolidation of tasks, elimination of non-value-added processes, or complete re-engineering of processes and systems).
• Utilize tools to monitor departmental cost and cost trends, striving continuously to improve value.
• Provide feedback to peers (BUMs, WCMs, Functional Managers (FMs) on cost and cost trends.

Forecast Development and Accuracy:

• Prepare timely forecasts for the department.
• Compare forward forecast results to historical actual results for trend assessment and analysis.

How will you get here? 

• Identify creative ways to reduce costs by streamlining processes and systems (i.e., modification of responsibilities or consolidation of tasks, elimination of non-value-added processes, or complete re-engineering of processes and systems).
• Drive continuous improvement through trend reporting analysis and metrics management.
• Assess the adequacy of data gathering methods used by the Workcells.
• Assure that procedures and work instructions are efficient and not redundant.
• Offer innovative ideas and suggestions for improvement. Identify and implement new practices and processes.
• Demonstrate commitment to customer service; anticipate, meet, and exceed expectations by solving problems quickly and effectively; making customer issues a priority.
• Lead by example.
• Rehabilitate troubled Workcells or to help during product launch. Foster a “back to basics” mentality during these times.
• Establish new measurement systems if/where possible.
• Exchange knowledge and information with other Jabil facilities to ensure best practices are shared throughout the Jabil organization.
• Ensure 100% adherence to all company policies and procedures (i.e., Health and Safety, Quality).
• Ensure all sensitive and confidential information is managed appropriately.
• Evaluate customer test strategies and recommend proper test solutions to support customer requests.
• Drive the development of specialized test equipment and software.
• Manage the procurement of test equipment.
• Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor.
• Comply and follow all procedures within the company security policy.
• May perform other duties and responsibilities as assigned.

Education:

• Bachelor’s degree in electrical engineering preferred.
• Or a combination of education, experience, and/or training.

Experience:

• Minimum of 7 years’ work-related experience, minimum of 5 years management experience required.
• Ability to read, analyze, interpret, and communicate regarding common scientific and/or technical journals, financial reports, and legal documents.
• Ability to respond to common inquiries or complaints from customers, regulatory agencies, or members of the business community.
• Ability to effectively present information to top management, public groups, and/or boards of directors.
• Advanced PC skills, including training and knowledge of Jabil’s software packages.
• Ability to calculate figures and amounts such as discounts, interest, commissions, proportions, percentages, area, circumference, and volume.
• Ability to apply concepts of basic algebra and geometry.
• Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists.
• Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form.
• Proficiency in use of personal computers, Microsoft Office products (Excel, Word, and PowerPoint) and e-mail skills required.

What Can Jabil Offer You?

Along with growth, stability, and the opportunity to be challenged, Jabil offers a competitive benefits package that includes:

• Medical, Dental, Prescription Drug, and Vision Insurance with HRA and HSA options
• 401K Match
• Employee Stock Purchase Plan
• Paid Time Off
• Tuition Reimbursement
• Life, AD&D, and Disability Insurance
• Commuter Benefits
• Employee Assistance Program
• Pet Insurance
• Adoption Assistance
• Annual Merit Increases
• Community Volunteer Opportunities

How will you make an impact?

• As the Test Engineering Manager, you will provide optimum test solutions and strategies through the effective management of people, systems, procedures, and equipment.
• You will drive innovation and continuous improvement within Test Engineering by harnessing innovative technologies in the areas of systems, equipment, and processes.
• As the Test Engineering Manager, you will also provide exceptional support to customers, team members, and shareholders.

What will you do ?

• Recruit, interview, and hire Assistant Test Engineering Managers.
• Communicate criteria to recruiters for Test Engineer and Test Management position candidates.
• Coach Test Engineering Managers in the interviewing/hiring process.
• Monitor team member turnover; identify key factors that can be improved; make improvements.

Employee and Team Development:

• Identify individual and team strengths and development needs on an ongoing basis.
• Create and/or validate training curriculum in area of responsibility.
• Coach and mentor Test Engineering staff to deliver excellence to every internal and external customer.
• Create and manage succession plans for Test Engineering and Test Management functions.

Performance Management:

• Establish clear measurable goals and objectives by which to determine individual and team results (i.e., operational metrics, results against project timelines, training documentation, attendance records, knowledge of operational roles and responsibilities, personal development goals).
• Solicit ongoing feedback from Workcell Manager (WCM), Business Unit Manager (BUM), peers, and team members on team member’s contribution to the Workcell team. Provide ongoing coaching and counseling to team members based on feedback.
• Express pride in staff and encourage them to feel good about their accomplishments.
• Perform team member evaluations professionally and on time.
• Drive individuals and the team to continuously improve in key operational metrics and the achievement of the organizational goals.
• Coordinate activities of large teams and keep them focused on times of crises.
• Ensure recognition and rewards are managed fairly and consistently in area of responsibility.

Communication:

• Provide communication forum for the exchange of ideas and information with the department.
• Organize verbal and written ideas clearly and use an appropriate business style.
• Ask questions; encourage input from team members.
• Assess communication style of individual team members and adapt own communication style accordingly.

Functional Management Responsibilities:

• Know and understand the campus strategic directions.
• Define, develop, and implement Test Engineering strategies which contribute to the campus strategic directions.
• Develop an understanding of the Workcell business strategy as it pertains to Test Engineering.
• Provide regular updates to BUM, WCM, and Operations Manager on the execution of the strategy.

Cost Management:

• Identify creative ways to reduce costs by streamlining processes and systems (i.e., modification of responsibilities or consolidation of tasks, elimination of non-value-added processes, or complete re-engineering of processes and systems).
• Utilize tools to monitor departmental cost and cost trends, striving continuously to improve value.
• Provide feedback to peers (BUMs, WCMs, Functional Managers (FMs) on cost and cost trends.

Forecast Development and Accuracy:

• Prepare timely forecasts for the department.
• Compare forward forecast results to historical actual results for trend assessment and analysis.

How will you get here? 

• Identify creative ways to reduce costs by streamlining processes and systems (i.e., modification of responsibilities or consolidation of tasks, elimination of non-value-added processes, or complete re-engineering of processes and systems).
• Drive continuous improvement through trend reporting analysis and metrics management.
• Assess the adequacy of data gathering methods used by the Workcells.
• Assure that procedures and work instructions are efficient and not redundant.
• Offer innovative ideas and suggestions for improvement. Identify and implement new practices and processes.
• Demonstrate commitment to customer service; anticipate, meet, and exceed expectations by solving problems quickly and effectively; making customer issues a priority.
• Lead by example.
• Rehabilitate troubled Workcells or to help during product launch. Foster a “back to basics” mentality during these times.
• Establish new measurement systems if/where possible.
• Exchange knowledge and information with other Jabil facilities to ensure best practices are shared throughout the Jabil organization.
• Ensure 100% adherence to all company policies and procedures (i.e., Health and Safety, Quality).
• Ensure all sensitive and confidential information is managed appropriately.
• Evaluate customer test strategies and recommend proper test solutions to support customer requests.
• Drive the development of specialized test equipment and software.
• Manage the procurement of test equipment.
• Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor.
• Comply and follow all procedures within the company security policy.
• May perform other duties and responsibilities as assigned.

Education:

• Bachelor’s degree in electrical engineering preferred.
• Or a combination of education, experience, and/or training.

Experience:

• Minimum of 7 years’ work-related experience, minimum of 5 years management experience required.
• Ability to read, analyze, interpret, and communicate regarding common scientific and/or technical journals, financial reports, and legal documents.
• Ability to respond to common inquiries or complaints from customers, regulatory agencies, or members of the business community.
• Ability to effectively present information to top management, public groups, and/or boards of directors.
• Advanced PC skills, including training and knowledge of Jabil’s software packages.
• Ability to calculate figures and amounts such as discounts, interest, commissions, proportions, percentages, area, circumference, and volume.
• Ability to apply concepts of basic algebra and geometry.
• Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists.
• Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form.
• Proficiency in use of personal computers, Microsoft Office products (Excel, Word, and PowerPoint) and e-mail skills required.

What Can Jabil Offer You?

Along with growth, stability, and the opportunity to be challenged, Jabil offers a competitive benefits package that includes:

• Medical, Dental, Prescription Drug, and Vision Insurance with HRA and HSA options
• 401K Match
• Employee Stock Purchase Plan
• Paid Time Off
• Tuition Reimbursement
• Life, AD&D, and Disability Insurance
• Commuter Benefits
• Employee Assistance Program
• Pet Insurance
• Adoption Assistance
• Annual Merit Increases
• Community Volunteer Opportunities

How will you make an impact?

• As the Test Engineering Manager, you will provide optimum test solutions and strategies through the effective management of people, systems, procedures, and equipment.
• You will drive innovation and continuous improvement within Test Engineering by harnessing innovative technologies in the areas of systems, equipment, and processes.
• As the Test Engineering Manager, you will also provide exceptional support to customers, team members, and shareholders.

What will you do ?

• Recruit, interview, and hire Assistant Test Engineering Managers.
• Communicate criteria to recruiters for Test Engineer and Test Management position candidates.
• Coach Test Engineering Managers in the interviewing/hiring process.
• Monitor team member turnover; identify key factors that can be improved; make improvements.

Employee and Team Development:

• Identify individual and team strengths and development needs on an ongoing basis.
• Create and/or validate training curriculum in area of responsibility.
• Coach and mentor Test Engineering staff to deliver excellence to every internal and external customer.
• Create and manage succession plans for Test Engineering and Test Management functions.

Performance Management:

• Establish clear measurable goals and objectives by which to determine individual and team results (i.e., operational metrics, results against project timelines, training documentation, attendance records, knowledge of operational roles and responsibilities, personal development goals).
• Solicit ongoing feedback from Workcell Manager (WCM), Business Unit Manager (BUM), peers, and team members on team member’s contribution to the Workcell team. Provide ongoing coaching and counseling to team members based on feedback.
• Express pride in staff and encourage them to feel good about their accomplishments.
• Perform team member evaluations professionally and on time.
• Drive individuals and the team to continuously improve in key operational metrics and the achievement of the organizational goals.
• Coordinate activities of large teams and keep them focused on times of crises.
• Ensure recognition and rewards are managed fairly and consistently in area of responsibility.

Communication:

• Provide communication forum for the exchange of ideas and information with the department.
• Organize verbal and written ideas clearly and use an appropriate business style.
• Ask questions; encourage input from team members.
• Assess communication style of individual team members and adapt own communication style accordingly.

Functional Management Responsibilities:

• Know and understand the campus strategic directions.
• Define, develop, and implement Test Engineering strategies which contribute to the campus strategic directions.
• Develop an understanding of the Workcell business strategy as it pertains to Test Engineering.
• Provide regular updates to BUM, WCM, and Operations Manager on the execution of the strategy.

Cost Management:

• Identify creative ways to reduce costs by streamlining processes and systems (i.e., modification of responsibilities or consolidation of tasks, elimination of non-value-added processes, or complete re-engineering of processes and systems).
• Utilize tools to monitor departmental cost and cost trends, striving continuously to improve value.
• Provide feedback to peers (BUMs, WCMs, Functional Managers (FMs) on cost and cost trends.

Forecast Development and Accuracy:

• Prepare timely forecasts for the department.
• Compare forward forecast results to historical actual results for trend assessment and analysis.

How will you get here? 

• Identify creative ways to reduce costs by streamlining processes and systems (i.e., modification of responsibilities or consolidation of tasks, elimination of non-value-added processes, or complete re-engineering of processes and systems).
• Drive continuous improvement through trend reporting analysis and metrics management.
• Assess the adequacy of data gathering methods used by the Workcells.
• Assure that procedures and work instructions are efficient and not redundant.
• Offer innovative ideas and suggestions for improvement. Identify and implement new practices and processes.
• Demonstrate commitment to customer service; anticipate, meet, and exceed expectations by solving problems quickly and effectively; making customer issues a priority.
• Lead by example.
• Rehabilitate troubled Workcells or to help during product launch. Foster a “back to basics” mentality during these times.
• Establish new measurement systems if/where possible.
• Exchange knowledge and information with other Jabil facilities to ensure best practices are shared throughout the Jabil organization.
• Ensure 100% adherence to all company policies and procedures (i.e., Health and Safety, Quality).
• Ensure all sensitive and confidential information is managed appropriately.
• Evaluate customer test strategies and recommend proper test solutions to support customer requests.
• Drive the development of specialized test equipment and software.
• Manage the procurement of test equipment.
• Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor.
• Comply and follow all procedures within the company security policy.
• May perform other duties and responsibilities as assigned.

Education:

• Bachelor’s degree in electrical engineering preferred.
• Or a combination of education, experience, and/or training.

Experience:

• Minimum of 7 years’ work-related experience, minimum of 5 years management experience required.
• Ability to read, analyze, interpret, and communicate regarding common scientific and/or technical journals, financial reports, and legal documents.
• Ability to respond to common inquiries or complaints from customers, regulatory agencies, or members of the business community.
• Ability to effectively present information to top management, public groups, and/or boards of directors.
• Advanced PC skills, including training and knowledge of Jabil’s software packages.
• Ability to calculate figures and amounts such as discounts, interest, commissions, proportions, percentages, area, circumference, and volume.
• Ability to apply concepts of basic algebra and geometry.
• Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists.
• Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form.
• Proficiency in use of personal computers, Microsoft Office products (Excel, Word, and PowerPoint) and e-mail skills required.

What Can Jabil Offer You?

Along with growth, stability, and the opportunity to be challenged, Jabil offers a competitive benefits package that includes:

• Medical, Dental, Prescription Drug, and Vision Insurance with HRA and HSA options
• 401K Match
• Employee Stock Purchase Plan
• Paid Time Off
• Tuition Reimbursement
• Life, AD&D, and Disability Insurance
• Commuter Benefits
• Employee Assistance Program
• Pet Insurance
• Adoption Assistance
• Annual Merit Increases
• Community Volunteer Opportunities

JOB SUMMARY

In this role, you will provide optimum test solutions and strategies through the effective management of people, systems, procedures, and equipment. Drive innovation and continuous improvement within Test Engineering by harnessing new technologies in the areas of systems, equipment, and processes. Provide exceptional support to customers, team members, and shareholders. Must have a HW and electronics testing background!

• Relocation available!

• Competitive Benefits and Salary with Annual Bonus Opportunity!

• Sign-on Bonus DOE!

• Immediate Need!

LEADERSHIP AND MANAGEMENT RESPONSIBILITIES

• Recruit, interview and hire Assistant Test Engineering Managers.

• Communicate criteria to recruiters for Test Engineer and Test Management position candidates.

• Coach Test Engineering Managers in the interviewing/hiring process.

• Monitor team member turnover; identify key factors that can be improved; make improvements.

• Identify individual and team strengths and development needs on an ongoing basis.

• Create and/or validate training curriculum in area of responsibility.

• Coach and mentor Test Engineering staff to deliver excellence to every internal and external customer.

• Create and manage succession plans for Test Engineering and Test Management functions.

• Establish clear measurable goals and objectives by which to determine individual and team results (i.e. operational metrics, results against project timelines, training documentation, attendance records, knowledge of operational roles and responsibilities, personal development goals).

• Solicit ongoing feedback from Workcell Manager (WCM), Business Unit Manager (BUM), peers and team member on team member’s contribution to the Workcell team. Provide ongoing coaching and counseling to team member based on feedback.

• Express pride in staff and encourage them to feel good about their accomplishments.

• Perform team member evaluations professionally and on time.

• Drive individuals and the team to continuously improve in key operational metrics and the achievement of the organizational goals.

• Coordinate activities of large teams and keep them focused in times of crises.

• Ensure recognition and rewards are managed fairly and consistently in area of responsibility.

• Provide communication forum for the exchange of ideas and information with the department.

• Organize verbal and written ideas clearly and use an appropriate business style.

• Ask questions; encourage input from team members.

• Assess communication style of individual team members and adapt own communication style accordingly.

FUNCTIONAL MANAGEMENT RESPONSIBILITIES

• Know and understand the campus strategic directions.

• Define, develop and implement Test Engineering strategies which contribute to the campus strategic directions.

• Develop an understanding of the Workcell business strategy as it pertains to Test Engineering.

• Provide regular updates to BUM, WCM, and Operations Manager on the execution of the strategy.

• Identify creative ways to reduce cost by streamlining processes and systems (i.e. modification of responsibilities or consolidation of tasks, elimination of non-value-added processes, or complete re-engineering of processes and systems).

• Utilize tools to monitor departmental cost and cost trends, striving continuously to improve value.

• Provide feedback to peers (BUMs, WCMs, Functional Managers (FMs) on cost and cost trends.

• Prepare timely forecasts for the department.

• Compare forward forecast results to historical actual results for trend assessment and analysis.

TECHNICAL MANAGEMENT RESPONSIBILITIES

• Identify creative ways to reduce cost by streamlining processes and systems (i.e. modification of responsibilities or consolidation of tasks, elimination of non-value-added processes, or complete re-engineering of processes and systems).

• Drive continuous improvement through trend reporting analysis and metrics management.

• Assess the adequacy of data gathering methods utilized by the Workcells.

• Assure that procedures and work instructions are efficient and not redundant.

• Offer new ideas and suggestions for improvement. Identify and implement new practices and processes.

• Demonstrate a commitment to customer service; anticipate, meet, and exceed expectations by solving problems quickly and effectively; making customer issues a priority.

• Lead by example.

• Rehabilitate troubled Workcells or to help during product launch. Foster a “back to basics” mentality during these times.

• Establish new measurement systems if/where possible.

• Exchange knowledge and information with other Jabil facilities to ensure best practices are shared throughout the Jabil organization.

• Ensure 100% adherence to all company policies and procedures (i.e. Health and Safety, Quality).

• Ensure all sensitive and confidential information is handled appropriately.

• Evaluate customer test strategies and recommend appropriate test solutions to support customer requests.

• Drive the development of specialized test equipment and software.

• Manage the procurement of test equipment.

• Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor.

• Comply and follow all procedures within the company security policy.

• May perform other duties and responsibilities as assigned.

EDUCATION & EXPERIENCE REQUIREMENTS

• Bachelor’s degree in Electrical Engineering or related discipline preferred

• Minimum of 8 years work-related experience in a HW test or electrical engineering role with a minimum of 5 years management experience required.

• Or a combination of education, experience and/or training.

• Proficiency in use of personal computers, Microsoft Office products (Excel, Word and PowerPoint) and e-mail skills required.

• Electronics manufacturing and HW testing background highly desired

• Ability to understand schematics

• Contribute to development of DOE's and data gathering to resolve ongoing failure trends

• Ability to understand test scripts and make modifications as needed,

• Ability to solve random failures by interrogation of test logs/ software / physical measurement / visual identification, define implement and perform tester PM 

• Project management and budgeting experience

BENEFITS WITH JABIL

Along with growth, stability, and the opportunity to be challenged, Jabil offers a competitive benefits package that includes:

• Medical, Dental, Prescription Drug, and Vision Insurance with HRA and HSA options

• 401K match

• Employee Stock Purchase Plan

• Paid Time Off

• Tuition Reimbursement

• Life, AD&D, and Disability Insurance

• Commuter Benefits

• Employee Assistance Program

• Pet Insurance

• Adoption Assistance

• Annual Merit Increases

• Community Volunteer Opportunities

Apply Today!

The Broward County Board of County Commissioners is seeking qualified candidates for Engineering Unit Supervisor (Highway Construction and Engineering Division).

THIS JOB ANNOUNCEMENT WILL REMAIN OPEN UNTIL SUFFICIENT NUMBER OF APPLICATIONS ARE RECEIVED AND MAY CLOSE AT ANY TIME.



This position supports professionals responsible for managing capital and mobility advancement projects for Broward County's Highway Construction and Engineering Division. The ideal candidate will have experience coordinating with multiple entities, including municipalities, state agencies, and local authorities. Work involves the review, planning, and coordination of the design and construction of County capital and mobility advancement projects, including schedules, budgets, and staff assignments.

General Description
Performs advanced professional and supervisory engineering work in the design and review of a wide variety of engineering and environmental projects.
Works under administrative supervision, developing and implementing programs within organizational policies and reports major activities to executive level administrators through conferences and reports.
Minimum Education and Experience RequirementsRequires a Bachelor's degree from an accredited college or university with major coursework in civil engineering.

Requires six (6) years progressively responsible experience in professional engineering work related to roadway design and construction or closely related field, including two (2) years of supervisory experience.
Special Certifications and LicensesPossess and maintain Professional Engineer License in State of Florida for duration of assignment.

Preferences* Master's Degree in Civil Engineering, Public Administration or closely related field* Certified in the use of one (1) or more of the following engineering programs (i.e. ICPR, ASAD, HY-8, HEC-RAS, HEC-HMS, Synchro, HCS, IMSA), or similar
* Construction Training Qualification Program (CTQP) Certifications (Asphalt, Concrete, Earthwork, QC Manager, etc.)
* Professional Traffic Operations Engineer, Professional Surveyor & Mapper, General Contractor License, or similar
* Project Management Professional and/or Certified Public Manager
* Advanced Work Zone Traffic Control Training Certification
* At least ten (10) years of experience in design and construction of roadway/traffic projects
* At least five (5) years of experience in one (1) of the following specialized fields of engineering: Traffic Operations, Structures, Drainage, Geotechnical, Construction Management
* At least three (3) years of experience with MicroStation OpenRoads Designer (ORD)
* At least two (2) years of experience in governmental contract and procurement
* At least two (2) years of experience in the preparation of agenda items and/or resolutions

SCOPE OF WORK

The functions listed below are those that represent the majority of the time spent working in this class. Management may assign additional functions related to the type of work of the job as necessary.

Schedules, assigns, and supervises engineering design projects; directs and coordinates field surveys, plan design, preparation and review, cost estimate development, and specifications preparation; participates in the development and design and review of major and complex projects.

Supervises and participates in the analysis and review of engineering studies and designs prepared by professional consultants; prepares recommendations for the consideration of professional and administrative superiors and committees.

Supervises the preparation of right-of-way and construction plans for major thoroughfares; conducts studies and prepares reports on proposed locations for future major thoroughfares; maintains liaison with appropriate outside agencies concerning projects under consideration for construction.

Supervises and participates in the activities of construction engineers, inspectors, and materials technicians in the investigation and construction of water and sewer mains, roadways, structures, and related public work projects; prepares general and special specifications for contract construction; supervises the maintenance and analysis of payment estimates and records.

Oversees and performs the technical review of remedial action plans; oversees and administers environmental licensing programs.

Conducts special engineering studies and projects relating to technical and administrative aspects of the public works function; coordinates the utilization of computer technology as related to the engineering function.

Conducts long-range studies involving other departments, agencies, and organizations; prepares reports and recommendations; seals and signs engineering plans, drawings, and documents.

Performs related work as assigned.

Physical Demands

Physical demands refer to the requirements for physical exertion and coordination of limb and body movement.

Performs sedentary work that involves walking or standing some of the time and involves exerting up to 10 pounds of force on a regular and recurring basis or sustained keyboard operations.

Unavoidable hazards refer to the job conditions that may lead to injury or health hazards even though precautions have been taken.

Involves routine and frequent exposure to traffic; moving machinery.

Competencies

• Manages Complexity

• Decision Quality

• Balances Stakeholders

• Directs Work

• Plans and Aligns

• Optimizes Work Processes

• Ensures Accountability

• Builds Effective Teams

• Communicates Effectively

• Situational Adaptability

• Collaborates: Building partnerships and working collaboratively with others to meet shared objectives.
• Customer focus: Building strong customer relationships and delivering customer-centric solutions.
• Instills trust: Gaining the confidence and trust of others through honesty, integrity, and authenticity.
• Values differences: Recognizing the value that different perspectives and cultures bring to an organization.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes (BCA) 787 Airframe Team is seeking Mechanical & Structural Engineering Managers (Level K) to join our Systems Stress, Payloads Stress or Seats Stressteamsin North Charleston, SC.

As the Engineering Manager, you will lead a team of analysis engineers supporting the 787 Aircraft Systems or Payloads. The statement of work will include future design, factory and fleet support, as well as interaction with the supply chain. 

The ideal candidate is a proactive, servant-minded leader who fosters a positive, collaborative work environment through clear communication, mentoring, and coaching. They will effectively manage multiple concurrent initiatives including both short and long-term assignments, build strong cross-functional relationships and promote a culture of engineering excellence and safety. Using sound engineering judgment, this leader will guide their team to deliver efficient, practical solutions that satisfy product safety requirements and business objectives.

This position may require domestic and international travel as needed (approximately 10%) to support business and program goals.

Primary Responsibilities:

• Staff and budget planning, as well as implementing best practices in program management

• Develop and execute business plans, policies, and procedures while formulating organizational and technical strategies

• Acquire resources, provide technical management of suppliers, and spearhead process improvements

• Build and maintain relationships with customers, stakeholders, peers, partners and direct reports will be essential

• Provide oversight and approval of technical approaches, products and processes, while managing, developing, and motivating employees

• Mentor and develop team member's technical and leadership capabilities

• Help facilitate daily team stand ups utilizing OPD best practices

• Proactive collaboration with customers and support organizations, build positive relationships (i.e. LE, Prod. Engineering, Operations, Fleet Support teams)

• Manage daily team priorities to effectively utilize team resources

• Communicate with lead engineers, management and team members

• Establish clear RAA for lead engineers, foster and develop lead pipeline

• Develop and execute business plans, policies and procedures and develop organizational and technical strategies

• Support hiring of engineering team

• Provide technical guidance and oversite to team and partner

• Maintain and update BOE/EAC/LRBP tools and process

Basic Qualifications (Required Skills/ Experience):

• Bachelor of Science degree in Engineering (with a focus on Mechanical, Civil, Aerospace, Aeronautical, or Material Sciences)

• 5+ years of experience in the Aerospace Industry

• 1+ years of experience leading cross-functional teams

• 1+ years of experience in using project management methodologies, including developing project plans, performance management, and managing issues and risks

• Experience managing projects and initiatives through to their completion/implementation hand-off point

Preferred Qualifications (Desired Skills/Experience):

• 3+ years of experience leading aerospace design engineering teams and integrating within a global supply base and product value streams

• 3+ years of experience with Boeing Commercial Airplanes

• Knowledge of Boeing products and processes

• Knowledge of Boeing 787 Aircraft Systems or Payloads or Seats

• Knowledge of Boeing Structural Analysis Methods

• Experience with commercial aircraft certification processes and regulations

• Demonstrated ability in team building, coaching, and employee development to enhance team performance and engagement

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Pay & Benefits:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.  Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.  

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and several programs that provide for both paid and unpaid time away from work.  

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay is based upon candidate experience and qualifications, as well as market and business considerations.  

Summary Pay Range: $137,700 - $186,300

Applications for this position will be accepted until Mar. 24, 2026

Export Control Requirements:

This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a “U.S. Person” as defined by 22 C.F.R. §120.62 is required. “U.S. Person” includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee.

Export Control Details:

US based job, US Person required

Education

Bachelor's Degree or Equivalent Required

Relocation

This position offers relocation based on candidate eligibility.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for 1st shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Job Description

The Boeing Commercial Airplanes Liaison Engineering Organization is seeking Consultant (Level 5) Liaison Engineers to support operations in Everett, Seattle, Auburn, and or Renton Washington. We are looking for a proactive individual who can make prompt engineering decisions and who want to go beyond their desk and into the factory for hands on engineering.

This position requires excellent communication and collaboration skills as the candidate will be partnering closely with production personnel.  The candidate will be the engineering representative on the factory floor transforming design into reality.

Position Responsibilities: 

• Analyzes, conducts root cause analysis and develops dispositions for production non-conformances.
• Applies knowledge of Boeing design principles to assess and resolve product/process issues through the product lifecycle.
• Applies engineering principles to research technical, operational and quality issues in support of executing final engineering solutions.
• Identifies documents, analyzes reported problems and communicates deviations that could impact design intent and safety; recommends and manages resolution.
• Develops and implements product/process improvements.
• Supports Integrated Product Teams (IPT) and participates in design reviews.
• Represents the engineering community from initial build through the production and post-production environment.
• Ensures supplier and build partner compliance with Boeing standards.
• Develops customer correspondence for continued safe operation and maintenance of equipment.
• Participates in on-site disabled product repair teams, accident investigation and support teams.
• Analyzes damage repair or structural modification to determine appropriate jacking and shoring, prevent collateral damage and assure a safe work environment.
• Designs interim structural repairs and conducts static strength analysis.
• Develops non-destructive test procedures, tools and standards.

This position is fully onsite. The selected candidate will be required to work onsite at one of the listed locations. This position involves daily exposure to factory environment which includes stairs, trip hazards, high noise areas, chemical hazards (breathing and handling), and entering airplanes during their many stages of build.

This position participates in the approximately 9-month Boeing Company Training Rotation Program, which may involve assignments to the first, second, or third shift, as well as weekend or daily overtime. The specific requirements for shift assignments and overtime vary between sites and are typically covered on a rotation basis. Additionally, there may be travel involved between Boeing Puget Sound sites during the training rotation.

Basic Qualifications (Required Skills/Experience): 

• Bachelor's or Masters of Science Degree from an ABET OR ABET equivalent accredited course of study in Engineering
• 14+ years of experience in structures, systems, design, or production engineering

Preferred Qualifications (Desired Skills/Experience): 

• Hands-on experience with materials and manufacturing processes.
• Prior BCA Engineering Material Review Board (MRB) Certification

Conflict of Interest:

 Successful candidates for this job must satisfy the Company’s Conflict of Interest (COI) assessment 
process

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.  

Shift:

This position is for multiple shifts and may require off shift, weekend, and travel assignments.

The candidate may periodically be assigned to first, second, or third shift as well as weekend or daily overtime. This requirement varies from site to site and is typically covered on a rotation basis.

Union:

This is a union represented position.

In locations where SPEEA representation applies, this job family will be covered by the terms of the collective bargaining agreement. Applicable and appropriate educational/certification credentials from an accredited institution and/or equivalent experience is required.
 

Pay and Benefits:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.  Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.  

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.  

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay is based upon candidate experience and qualifications, as well as market and business considerations.  

• Summary pay range for Expert (level 5): $165,750 - $224,250

Applications for this position will be accepted until Mar. 20, 2026

Export Control Requirements:

This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a “U.S. Person” as defined by 22 C.F.R. §120.62 is required. “U.S. Person” includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee.

Export Control Details:

US based job, US Person required

Relocation

This position offers relocation based on candidate eligibility.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for 1st shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Date Posted:

Country:

Location:

Position Role Type:

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Security Clearance:

At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world.

The Systems Engineering, Integrated Systems Department is seeking a Systems Engineering Technical Lead for the NASAMS product line. This role requires strong technical expertise and engineering leadership skills to drive the design and development of world-class air and missile defense systems.

The Integrated Systems Department supports Raytheon by providing world-class weapon systems engineering. Domain expertise includes radar systems, effector systems, battle management, command and control, network design, battlespace integration, and interoperability for both domestic and international customers.

You will work alongside motivated engineers who are responsible for conducting systems engineering studies and trades; supporting system requirements definition and analysis; and contributing to algorithm development, integration, test, and evaluation.

What You Will Do

• Provide technical oversight and management for a variety of Systems Engineering efforts

• Concept and requirements development (including decomposition and flowdown) within a mature product-line

• Concept of Operations (CONOPS) development and design

• Algorithm optimization and development

• Multi-disciplinary development efforts across the kill-chain for an Air and Missile Defense System

• Collaboration with customer to bring new capabilities to the warfighter

• Functional analysis of real world and test data; trade studies to bring advanced features to fielded system

• Support and lead Internal and External Program and Design Reviews

• Collaborate with other IPT/CPT leads from the various functions and products

• Support and lead Internal Research and Development for future capability upgrades

• System integration and test support, including live fire test events

• Periods of travel up to 25% of time both domestically and internationally

Qualifications You Must Have

• Typically requires a degree in Science, Technology, Engineering or Mathematics (STEM) and a minimum of 8 years of prior relevant experience

• Experience with Air Defense Systems in systems engineering roles supporting development or production

• Experience with managing budget, scope and/or earned value

Qualifications We Prefer

• Experience interfacing with external customers and industry partners

• Excellent communication skills, written and verbal, with a variety of audiences

• Self-motivated, passionate leader

• 5+ years of experience in Air Defense Systems, Systems Engineering production or development

• Existing DoD Security Clearance

• Knowledge of Air Defense systems (examples – Patriot and NASAMS Systems)

• Experience managing competing programmatic priorities

• Experience making challenging technical decisions

• Familiarity with the Raytheon Integrated Product Development System (IPDS) or equivalent

• Experience with Earned Value Management (EVM) (plus, experience with Raytheon execution of EVM)

• Advanced degree in EE, CE, Physics, Math, ME, Aerospace\

What We Offer

• Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation.

• Relocation assistance is available

Learn More & Apply Now!

Please consider the following role type definition as you apply for this role.

• Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products.

Clearance Information: This position requires a security clearance. DCSA Consolidated Adjudication Services (DCSA CAS), an agency of the Department of Defense, handles and adjudicates the security clearance process. More information about Security Clearances can be found on the US Department of State government website here: part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms