Power Plant Design Software Jobs in Usa

If you have what it takes to become part of the Vistra family and would like to start a promising career with a global leader, take a look at the exciting employment opportunities that are currently available and apply online.

Job Summary

Responsible for the safe and efficient operation and maintenance of a Natural Gas Power Plant. This includes water treatment systems, circulating water systems, condensate/feedwater systems, heat recovery steam generator systems, turbine systems, gas turbine systems, generator systems, control systems, electrical systems, and various other plant systems. Is required to show initiative in his/her area of responsibility.

The salary range for this position is $48.00 to $57.47 per hour plus amazing benefits and other incentives. Additional compensation for overtime work.

Key Accountabilities:

•Proficient in primary skill required of position.

•Proficient mechanical and electrical skills for maintaining equipment at the plant.

•Performs troubleshooting and documentation and assists in the resolution of problems discovered on shift.

•Performs daily maintenance, overhauls, calibration, troubleshooting, repair/replacement and removal/installation of plant equipment and systems.

•Makes decisions and recommends appropriate repair techniques for plant equipment to peers, supervisors, plant management.

•Conducts excitation system inspections and preventive maintenance.

•Proficient in operating material handling equipment.

•Develops and implements plant operating procedures.

•Understands relationship of equipment to plant systems.

•May provide instruction and teaching to lower-level employees.

•Ensures strict adherence to safety, health and environmental procedures as they relate to plant operations and maintenance including but not limited to Lockout Tagout, Job Safety Analysis, Confined Space, Hot Work, Electrical Safety and PPE.

Education, Experience, and Skill Requirements:

•At least 4 years related experience.

•Satisfactory completion of Tier 2 within primary skill for position job performance measure.

•Minimum of High School diploma or equivalent.

•If applicable, candidate will hold the required level of state license as recognized by the governing body of that particular state (MA, OH).

•Demonstrate computer-based skills.

•Demonstrate effective oral & verbal communications skills.

•Independent knowledge of troubleshooting.

•Must pass POSS/MASS pre-employment test.

•This position can be filled at a level I, II, III or IV depending on experience and skill level.

Physical Requirements:

•Ability to work overtime and standby status are required.

•Ability to hear and understand audible alarms, detect changes in noise levels of equipment, accurately read and interpret instruments and gauges, and communicate clearly on portable radios.

•Ability to respond to plant emergencies.

•Ability to perform demanding work on heights under adverse conditions and when participating in emergency activities.

•Ability to climb stairs, ladders, and enter confined spaces as required to complete assigned task.

•Ability to lift 50 lbs of weight.

•Ability to pass respirator physical and fit test.

•While performing the duties of this job, the employee will be exposed to weather conditions prevalent at the time.

Key Metrics:

•Satisfactory completion of Tier 3 training and qualification requirements.

•Demonstrate continual self-improvement in job skills and knowledge.

•This job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee. Duties, responsibilities and activities may change, or new ones may be assigned at any time with or without notice.

We are a company of people committed to: Exceeding Customer Expectations, Great People, Teamwork, Competitive Spirit and Effective Communication. If this describes you, then apply today!

If you currently work for Vistra or its subsidiaries, please apply via the internal career site.

It is the policy of the Company to comply with all employment laws and to afford equal employment opportunity to individuals in all aspects of employment, including in selection for job opportunities, without regard to race, color, religion, sex, sexual orientation, gender identity, pregnancy, national origin, age, disability, genetic information, military service, protected veteran status, or any other consideration protected by federal, state or local laws.

If you are an individual with a disability and need assistance submitting an application or would like to request an accommodation, please email us at to make a request.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for an Assembler Power Plant B to become part of our Join and Installation team in Everett and Kent, Washington.

Join our dynamic team as an Assembler Power Plant B, where your skills will be pivotal in constructing and assembling critical aircraft components. In this essential role, you will utilize production drawings and specifications to accurately install, fit, and align parts for power packs and strut assemblies. Your attention to detail will ensure that each component is meticulously drilled, reamed, and riveted, while your expertise in pre-assembly will streamline the process for wiring harnesses and tubing assemblies. You will operate advanced material handling equipment to efficiently load and unload engines and struts. Your ability to verify dimensions and check for defects will be crucial in maintaining our commitment to excellence. If you are passionate about aviation and thrive in a collaborative environment, we invite you to contribute to our mission of delivering high-quality aircraft systems.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.

Position Responsibilities:

• Install, fit, fasten, align, adjust, and connect parts and assemblies to build aircraft power packs and strut assemblies.

• Use production drawings, specifications, and assembly pages to derive measurements and locate points for part marking and layout preparation.

• Perform drilling, reaming, riveting, and soldering necessary for assembly tasks.

• Review work orders and installation plans to determine job priorities and obtain appropriate drawings and production illustrations.

• Obtain and verify kitted detail parts and assemblies, ensuring they are correct and free of defects.

• Pre-assemble components such as wiring harnesses and tubing assemblies using power and hand tools.

• Operate material handling equipment, including overhead cranes and scissor lifts, to load and unload engines and struts.

• Align parts and assemblies to mating surfaces, temporarily securing them in place and checking for proper alignment.

• Attach, seal, and connect parts, assemblies, and wires using the correct fasteners and tools, tightening per specifications.

• Torque fasteners and install safety devices such as lock wires and cotter pins as required by drawings or specifications.

• Seal hydraulic fittings and access doors, applying necessary fluids, primers, and adhesives according to specifications.

• Operate various tools, including pull rivet guns and countersinks, to fasten and torque parts and assemblies.

• Verify close tolerance dimensions using precision measuring tools and check work for defects before inspection.

• Maintain personal and tool certifications, ensuring compliance with safety and operational standards.

• Communicate with team leaders and supervisors regarding job progress, issues, and assistance needed, while consulting with engineering and planning as required.

Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs. to 15-35 lbs.

• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.

• Work in environments that may involve contact with metals, solvents, and coolants.

• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.

• Adapt to varying noise levels and atmospheric conditions.

• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

To meet U.S. export control compliance requirements, a “U.S. Person” as defined by 22 C.F.R. §120.62 is required. “U.S. Person” includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee. Do you meet this requirement?

Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.

Basic Qualifications:

• 1+ years of experience working with mechanical or structures related statements of work; such as construction, aerospace, automotive, maritime or similar industry; this can include education and military.

• 1+ year experience utilizing and following detailed work instructions, reading and interpreting blueprints, drawings, and specifications.

• Ability to walk constantly throughout the workday; stand 6-8 hours per day; climb or work from stairs/steps up to 8 hours per day; climb ladders; bend and twist frequently up to six hours per day; squat and kneel.

• Ability to lift up to 35 pounds.

• This position requires you to wear eye, hearing, foot, hand, respirator and other personal protective equipment/safety gear at all times.

• Proficiency in reading, writing, and speaking English

Preferred Qualifications:

• 1+ years of experience performing aircraft structural work or equivalate.

• 1+ years of experience using high impact vibratory tools; such as bucking/riveting.

• Enrolled in a Boeing partnered manufacturing related high school or community and technology college academic program

Conflict of Interest: 

• Successful candidates for this position must successfully complete the Company’s Conflict of Interest (COI) assessment process.

Typical Education & Experience:

• High school graduate or GED preferred.

Relocation:

• Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.

Drug Free Workplace

• Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

• This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Safety Sensitive Statement:

• This is a safety-sensitive position and is subject to Department of Transportation (DOT) random drug and alcohol testing.

Shift Work Statement:

• This position is for a variety of shifts

Total Rewards & Pay Transparency:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.  Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.  

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.  

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay: $25.00/hour, with potential to earn up to $55.30/hour in accordance with the terms of the relevant collective bargaining agreement.

Applications for this position will be accepted until Sept. 04, 2026

Language Requirements

English Preferred

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for a Power Plant Operators A, to join our team in Everett, Washington.

As a Power Plant Operator A, you will be a vital part of our manufacturing team, responsible for safely and efficiently operating and maintaining power generation systems. This includes monitoring equipment, performing routine inspections, troubleshooting issues, and ensuring compliance with safety protocols.

You will play a critical role in upholding our commitment to safety and quality standards and ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and join our mission to deliver excellence in aviation.

Position Responsibilities

• Operate boilers, and may operate engines and boiler associated auxiliary equipment.

• Read gauges, meters, and charts to track boiler operations.

• Monitor boiler water, chemical, and fuel levels.

• Activate valves to change the amount of water, air, and fuel in boilers.

• Fire coal furnaces or feed boilers, using gas feeds or oil pumps.

• Inspect and maintain equipment to ensure that it is operating efficiently.

• Check safety devices and perform environmental checks routinely.

• Record data and keep logs of operation, maintenance, and safety activity.

Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.

• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.

• Work in environments that may involve contact with metals, solvents, and coolants.

• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.

• Adapt to varying noise levels and atmospheric conditions.

• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee

Resumes of current Puget Sound Boeing employees submitted via “Find Jobs” in Boeing/Workday will be considered as this job is not installed in QTTP (Quality Through Training Program).

Basic Qualifications

• City of Seattle Steam Engineer's License Grade 2.

• 3+ Year Experience of boiler operation and maintenance experience.

• This position requires an individual when working at heights to utilize fall protection equipment that has weight limitations.

• Must be able to lift, push and pull up to 35 pounds frequently within an 8 hour shift

Preferred Qualifications:

• Must be able to stand, twist, bend, kneel and occasional crawling within an 8 hour shift.

• Ability to work in noisy environments while completing tasks.

Typical Education & Experience:

High school graduate or GED preferred.

Relocation:

• Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.

Drug Free Workplace

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

This is an hourly position governed by the International Union of Operating Engineers (IUOE-7286) agreement.

Shift Work Statement:

• This position is for 4th shift

Total Rewards & Pay Transparency

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.  Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.  

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.  

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay is based upon candidate experience and qualifications, as well as market and business considerations.  

Summary pay range: $60.92 per hour – $60.92 per hour

Applications for this position will be accepted until Apr. 03, 2026

Language Requirements

English Preferred

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

The Construction Supervisor must have experience writing contract scopes of work and collaborating with contract administrators. Technical knowledge of mechanical combustion turbine generators, auxiliary support equipment, and balance-of-plant (BOP) assets is required.

• This role requires planning and organizing Mechanical Combustion Turbine Generator projects to achieve project objectives.
• Strong leadership, team-building, outage coordination, planning, scheduling, and supervisory experience are essential.
• Must be willing to work overtime, including night shifts and weekends, as required during planned or forced outages and as directed by management.
• Must be able to travel to various power plant locations.
• Must demonstrate strong leadership and team-building skills, and be able to work effectively in a team environment.

QUALIFICATIONS

Education/Training:

• Bachelor of Science degree in a related field with field engineering experience
• Construction management training/experience is required.
• Knowledge of OSHA 1910 and 1926 maintenance & construction safety requirements
• Knowledge of construction codes, standards, and gas turbine/generator disassembly/reassembly and maintenance experience required.

EXPERIENCE

• Experience in project management, technical training, and/or experience in GE frame 7FA gas turbines and generators, turbine operations, unit commissioning, outage planning for borescope inspections, hot gas path inspections, and major outage inspections for turbines and generators, outage execution of centerline of turbines and generators, including auxiliary turbine/generator support equipment.
• Supervision in leading centerline outages from project initiation to project completion.

In our 'always on' world, we believe it's essential to have a genuine connection with the work you do.

Aurora Networks is the world’s leading provider of access network solutions. Our comprehensive, end-to-end product portfolio supports global service providers with innovative, leading-edge HFC, PON and broadband network products

.

We’re looking for bold thinkers and exceptional builders—engineers who thrive in highly technical environments and want to design hardware that powers the connected world. If you enjoy solving tough engineering challenges, collaborating with a talented cross‑functional team, and owning designs from concept through production, this is the role for you.

How You’ll help us connect the world:

As a Power Hardware Engineer reporting to the Sr. Manager of Hardware Engineering, you will play a key role in architecting and developing stand‑alone and embedded power supplies for indoor and outdoor CATV/networking equipment. You’ll work hands‑on across the entire product lifecycle—from early concept, modeling, and prototyping to validation, manufacturing, and sustaining engineering.

What You’ll Own

• Lead electrical design of SMPS‑based power supplies from concept through production release
• Design for challenging environments, ensuring high reliability and robustness
• Perform electrical, thermal, and DVT measurements throughout all stages of development
• Model, breadboard, and build prototypes for rapid iteration and validation
• Design and specify custom magnetic components for advanced SMPS designs
• Develop and optimize digital and analog control interfaces
• Mitigate input/output noise and improve power quality and efficiency
• Provide sustaining engineering support for existing power supply platforms
• Partner with manufacturing and supply chain teams to qualify alternate components and improve production efficiency

Required Qualifications:

• 7+ years of hands‑on SMPS design experience, including topologies such as Forward, Flyback, Buck, Boost, etc.
• Deep experience designing and specifying magnetics for power conversion
• Strong background in analog and digital power control circuits
• Solid understanding of noise mitigation, EMI/EMC considerations, and power integrity
• Strong knowledge of discrete semiconductors and passive components
• Proficiency with electrical modeling and simulation tools (e.g., SPICE‑based tools, simulation suites)

• Re-location assistance will be provided for candidates within U.S.

.Important Candidate Notice: On January 9, 2026, CommScope finalized the sale of its Connectivity and Cable Solutions segment, which included the CommScope name and brand, to Amphenol Corporation. The remaining businesses — Access Networks Solutions (now rebranded as Aurora Networks) and RUCKUS Networks have been unified under the new parent company, renamed as Vistance Networks. The role being advertised is part of Aurora Networks.

Why Join Us?

Vistance Networks shapes the future of communications technology, pushing past what is possible. We deliver solutions that bring reliability and performance to a world always in motion. Our global team of innovators and employees are trusted advisors who listen to customers first, then deliver

value.

Aurora Networks (formerly CommScope’s Access Networks Solution segment) is the world’s leading provider of access network solutions. Our comprehensive, end-to-end product portfolio supports global service providers with innovative, leading-edge HFC, PON and broadband network products.

If you want to grow your career alongside bright, passionate, and caring people who strive to create what's next…..come connect to your future at Vistance Networks.

Vistance Networks is an Equal Opportunity Employer (EEO), including people with disabilities and

veterans.

Project Manager - Make Ready Design

Location: Remote

Are you an experienced Power Utility Project Manager? If you are open to joining a supportive, passionate team, we have an attractive opportunity for you!

Please note: This position can work fully remotely, but new hires will be required to come to our main office located in Perrysburg, OH, for an initial 2-week in-person paid orientation and training period.

Note to applicants: This is not an Information Technology (IT) position.

WHAT YOU CAN EXPECT TO DO AS A PROJECT MANAGER AT SIGMA:

Core Description: The Project Manager manages small to large-scale complex projects from project initiation to project close-out. Liaises between project members, cross-functional teams, external vendors, and other stakeholders to ensure proper communication, accurate and on-time reporting, and management of the schedule. The Project Manager is also responsible for maintaining and growing their client(s) accounts.

Project Leadership:

• Serve as a mentor and coach to assistant project managers, offering guidance and support.

Project Planning:

• Establish, track, and control project cost, scope, schedule, and budget to deliver assigned projects in accordance with contractual agreement.
• Creation of Proposals. Lead kickoff meetings and discovery calls. Works with the Project Engineer on scope, schedule, and budget
• Plan, schedule, and execute all phases of projects or programs in accordance with project management processes, policies, guidelines, and corporate governance.
• Develop high-level project workflow and ensure project scopes and milestone dates for all assigned projects.
• Provide project cost forecasting over the life of the project or program.
• Collaborate with internal teams to ensure the successful delivery of products/services.

Project Monitoring and Reporting:

• Prepare project change orders and/or correction actions in collaboration with the client, Project Engineer(s), and Operations Manager
• Monitor and report on key metrics, customer satisfaction, and performance against objectives.
• Maintain accurate records of client interactions, agreements, and sales activities in the CRM system.

Project Closure:

• Ensure the orderly closure of projects, including finalizing all project activities, obtaining client acceptance, and conducting post-project evaluations.
• Document lessons learned and share best practices with the organization.

Budget Management:

• Develop and manage project budgets, tracking expenses and ensuring financial goals are met.
• Project invoicing.

Risk Management:

• Identify potential risks and issues that may impact project success and develop risk mitigation plans and contingency strategies. Monitor and manage risks throughout the project life cycle.

Communication:

• Liaises between project members, cross-functional teams, external vendors, and other stakeholders to ensure deliverables, requirements, schedules, cost, and meeting plans are communicated.
• Maintain clear and consistent communication with all project stakeholders. Provide regular project updates to management and team members.
• Lead project update calls and in-person meetings with external clients throughout the project life cycle.
• Monitor and manage expectations of communication between staff and external clients.

Customer/Client Relationship Management:

• Build and nurture client relationships, understanding their needs and business objectives.
• Build an understanding of the customer's organizational structure and decision-making process.
• Serve as a primary point of contact for assigned clients, addressing inquiries and providing exceptional service.
• Communicate effectively with clients to provide updates, gather feedback, and troubleshoot any issues.
• Proactively identify opportunities to upsell or cross-sell additional offerings to existing customers.
• Prepare and deliver presentations, proposals, and sales materials to clients as needed.
• Stay informed about industry trends and developments to provide value to clients.
• Contribute towards and execute on the strategic plan to target new business opportunities.
• Other duties as assigned.

Education and Experience Requirements:

• Education*: H.S. Diploma or equivalent is required. An Associate's or Bachelor's degree is preferred, but not required
• Experience*: 5+ years of relevant industry experience, 3+ years of Project Management experience *. Management may consider other education and/or work experience to be acceptable for appointment to this position.
• Project management certification preferred.
• Proven experience in project management, with a track record of successfully delivering projects on time and on budget.
• Strong leadership, communication, and interpersonal skills, with the ability to manage multiple stakeholders with competing priorities.
• Must be results-driven with a dedicated focus on achieving successful project performance, customer satisfaction, and organic sales growth.
• Demonstrated level of understanding of commonly used project management concepts, practices, and procedures.
• Adaptability and problem-solving abilities.
• Exceptional attention to detail and organizational skills.
• Available during the “core” work hours of 8:00 a.m. to 5:00 p.m. during the week. Occasional evening and weekend work may be required as duties demand.
• Willing and able to travel regularly (20%-30%), which will include overnight travel
• Dependable transportation, a valid driver’s license, and insurance
• Able to pass a background check/drug test/driving record check.
• Authorized to work in the United States.

Physical Requirements:

• Must be able to endure frequent, lengthy periods of sedentary work and sit for prolonged periods, including sitting at a desk and driving in a vehicle.
• Must be able to utilize a computer keyboard, computer monitor, and telephone for prolonged periods.
• Must have the physical ability to perform activities such as preparing and analyzing data and figures, transcribing notes, and viewing a computer terminal; these activities require close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus.
• Must have the physical ability to express or exchange ideas using spoken words and convey detailed or important spoken instructions to other workers accurately, often in a group setting.
• Must have the ability to receive detailed information through oral and written communication.

Competencies/Skills: Project Management | Utility Industry | Electrical Power Distribution | Power Distribution Design | Budget Management | Risk Management | Client Relationship Management | Team Collaboration | Project Planning | Schedule Management | Financial Management | Communication Skills | Project Forecasting | Project Cost Control | Stakeholder Communication | Risk Mitigation | Strategic Planning | Industry Trends | Regulatory Compliance | Safety Standards | Resource Allocation | CAD Software | GIS Systems | Utility Standards | Substation Design | Distribution Automation | Load Analysis | Project Manager | Power Distribution Manager | Electrical Project Manager | Utility Project Manager | Design Project Manager | Distribution Design Manager | Electrical Engineer | Power Systems Engineer | Utility Engineer

About Sigma Technologies

Sigma Technologies is a growing engineering and design firm with over 500 team members across 30+ states. For more than 25 years, our work for the power and telecommunications industries has helped create a positive impact in communities across the country. Our core values — Safety, Honesty, Truth, and Decency — fuel our culture. We are TeamSigma™.

**To learn more about working at Sigma, view our video and career page. **If you do not have Project Management experience, please refer to our other open positions: **While we list our openings in multiple locations, you only need to apply to one, as most are remote.

This job advertisement should not be interpreted as all-inclusive. It is intended to identify the major responsibilities and requirements of a job. The individual may be required to perform job-related responsibilities and tasks other than those stated in this description.

This advertisement does not constitute an employment agreement between Sigma and the employee and is subject to change by Sigma as the needs of the organization and/or the requirements of the function change.

Pay is commensurate with experience and education. Sigma is an equal opportunity employer and will not discriminate based on an employee’s race, color, gender, sexual preference, gender identity, age, religion, national origin, disability, genetic information, veteran/military status, or any other classification protected by law.

#remote

PM22

PI015e01dcde7a-3631

We’re hiring a Kitchen & Bath Designer (Entry Level)

This is an ideal opportunity for a motivated, detail-oriented designer looking to grow their career in residential remodeling while working behind the scenes with an experienced design team.

As a Kitchen & Bath Designer, you’ll support the design and production of kitchens, baths, and other residential remodeling projects. You’ll collaborate closely with senior designers to create drawings, specify products, and help bring high-end projects to life — without the pressure of sales.

What you’ll do:

• Support experienced designers throughout the design process

• Create drawings and layouts using CAD-based design software

• Assist with cabinetry design and product specifications

• Help prepare project documentation and presentations

• Work collaboratively with design and project management teams

What we’re looking for:

• 1–5 years of kitchen & bath or related residential design experience

• Design schooling and/or a related degree preferred

• Proficiency in Word, Excel, and CAD software (20/20, Chief Architect, AutoCAD, etc.)

• Strong communication skills and ability to follow directions

• Highly organized, detail-oriented, and eager to learn

• Positive attitude and passion for residential design

Compensation & benefits:

• Competitive compensation

• Health insurance (supplemented)

• PTO and vacation

• 401(k) with profit sharing

• Bonus incentive plan

Build a career, not just a job. Join an established Design & Build company where you’ll learn, grow, and be part of a successful, collaborative team. Submit your resume for consideration or email us directly at

Who Are We?

Stand Out For Good, Inc. is a rapidly growing women's fashion company with 5 unique brands, in 130+ locations, across 38 states. Our stores feel like a sanctuary - a place of beauty from the inside out. From welcoming experiences and warm associates to thoughtfully curated products, our brands are built upon the founding principles of giving back and making a difference in the World.

Our Mission

"Stand Out. For Good". At Altar'd State, those four words are more than just our motto, they are why we exist. From Mission Mondays, where 10% of our net proceeds go directly to local charitable organizations, to our long-standing partnership with Coprodeli USA, in which we are in the process of building 22 schools for impoverished communities in Peru, we are committed to giving back in meaningful ways to those in need.

We are seeking a creative and passionate Print Design Intern to join our growing, dynamic team in our Orange County, CA Design Studio. This Design Internship offers a unique opportunity for aspiring fashion designers to gain hands-on experience in the industry. The Design Intern will contribute to the creation of fresh, innovative collections that align with the brand's vision. The Intern will work closely with the Design team to assist in various aspects of the design process, from concept development to final product creation.

Key Responsibilities

• Stay up-to-date with Print and Art trends, conduct market research, and gather inspiration from various sources to inform design decisions.
• Create prints, plaids, embroideries, graphics and other artworks.
• Prepare artwork for production: scaling, color callouts and sending to vendors.
• Use Adobe Photoshop and illustrator to create and set up production ready artwork.
• Creating original textile prints, recolors, manipulating repeats and scales,
• Assist in choosing colors and building seasonal color palettes
• Collaborate with the Design team on artwork needs
• Produce tech packs including sketches, artwork, construction details, and sewing instructions.
• Participate in fittings to evaluate fit and make necessary adjustments.
• Maintain organized design records, including sketches, prints, submits and samples.
• Actively participate in design critiques and incorporate feedback to improve design concepts and prototypes.

Qualifications

• Currently pursuing or recently completed a degree in Fashion Design or Apparel Design.
• A strong passion for women's fashion and trends.
• Proficiency in sketching by hand or digitally and knowledge of design software including Adobe Illustrator and Photoshop.
• Basic knowledge of fibers and fabrics.
• Strong communication and collaboration skills.
• Detail-oriented with a keen eye for aesthetics.
• Eagerness to learn and adapt in a fast-paced, creative environment.

Stand Out For Good, Inc. is an equal opportunity employer and values diversity. All employment decisions are decided on the basis of qualification, merit and business need. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex or national origin.

We are proud to share that our associates have made us one of Fortune's Best Companies to Work For! Recently, our team has received the following recognition:

• #73 in Fortune 100 Best Companies to Work For 2023
• #4 in Fortune Best Workplaces in RetailTM 2022
• #93 in Best Workplaces for MillennialsTM 2023
• #34 in Fortune Best Workplaces for WomenTM 2022

OSP Fiber Designer

Location: Remote

Are you a skilled Fiber Designer looking to make an impact? Join Sigma Technologies as a remote OSP Fiber Designer, specializing in FTTH, AutoCAD, and outside plant design for leading telecommunications projects. With a commitment to Safety, Honesty, Truth, and Decency, we offer a supportive and growth-oriented culture where you can thrive.

**To learn more about working at Sigma, view our career page.

**If you do not have OSP Fiber Design experience, please refer to our other open positions: **While we may list our Designer openings in multiple locations, you only need to apply to one as they are remote.

ABOUT THIS OPPORTUNITY:

Sigma Technologies has multiple Designer positions available that REQUIRE Outside Plant Fiber Design and/or Drafting Experience. For this role, we are providing FTTH, Joint Use and general OSP Overhead Fiber design services to power utility companies. We're in need of knowledgeable, already-skilled staff to join our program teams.

Note: This position can work remotely, but new hires will be required to come to our headquarters in Perrysburg, OH for an initial 2-week in-person paid orientation and training period.

Position Description:

Designers perform outside plant overhead fiber design for telecommunications companies. Designers should have knowledge of commonly-used concepts, practices, and procedures in overhead fiber design and will rely on standards, instructions, and pre-established guidelines to perform the functions of the job. The Designer is expected to apply experience and knowledge to provide solutions when guidelines will not meet expected outcomes and be able to recommend new and/or improvements to documentation where needed.

WHAT YOU CAN EXPECT TO DO AS AN OSP DESIGNER AT SIGMA:

• Executes work orders for fielding and/or design of infrastructure while meeting quality, time, and budget constraints
• Performs 2-D Civil and/or Electrical type design in CAD (i.e. AutoCAD, MicroStation, or similar program)
• Collects data by visually identifying, inspecting, and recording equipment and structures from the field and maps data collected
• Interprets general designs, data, and notes and applies established design guidelines, processes, and procedures
• Is capable of independent work on complex tasks within a competency
• Resolves problems encountered throughout the design process
• Collaborates with others (managers, designers, field techs, drafters, administration) to devise the best infrastructure solutions
• Performs kickoff/scope meetings within a given project, program, or customer to assist in specific types of route analysis, preparation of scope, and/or to assist in the preparation of bid documentation
• Performs research to identify pole ownership, right of way, property rights, and permit requirements and communicates with outside parties to obtain right-of-way approvals, and easements and coordinate the same
• Provides guidance to others for specific duties in software, processes, and procedures
• Provides quality control review
• Other duties as required

 Competencies/Skills: Telecommunications Fiber Designer | FTTH | Fiber to the Home | Fiber Optic Design | Outside Plant Design | OSP Design | Fiber Network Planning | AutoCAD | GIS Mapping | Splicing Diagrams | Aerial Fiber Design | Underground Fiber Design | Telecommunications Infrastructure | Fiber Route Analysis | Right-of-Way Permitting | Pole Loading Analysis | Microtrenching | FTTx Networks | PON Architecture | Fiber Optic Engineering | Design Standards | Telecommunications Construction | Network Optimization | Cable Pathway Design | CAD Software | Fiber Optic Drafting | Design Specifications 

WHAT WE’RE LOOKING FOR:

• EDUCATION*: HS Diploma or equivalent is required. An Associate’s degree or higher is preferred but not required. *Management may consider other combinations of education as needed.
• EXPERIENCE*: 2+ years of demonstrated design experience in the Telecom Utility Industry. *Management may consider other combinations of education and experience as needed.
• Joint-use design experience strongly preferred
• Proficiency in Computer Aided Design Programs, or similar CAD tools is required.
• Ability to read and comprehend engineering schematics
• Knowledge of construction and planning procedures
• Strong technical knowledge and skills
• Ability to learn and operate customer based proprietary software and other computer systems to expedite and facilitate the work order process
• Strong oral and written communication skills
• Basic financial skills to assist in making sound business decisions
• Able to work in all weather conditions
• Willing to travel overnight during the week
• Dependable transportation and valid driver’s license and insurance
• Able to pass a background check/drug test/driving record check
• Computer literate – especially Microsoft Word, Excel, Outlook
• Authorized to work in the United States

Physical Requirements:

• Must be able to endure frequent, lengthy periods of sedentary work and sit for prolonged periods of time, including sitting at a desk and driving in a vehicle.
• Must be able to utilize a computer keyboard, computer monitor, and telephone for prolonged periods of time.
• Must have the physical ability to perform activities such as preparing and analyzing data and figures, transcribing notes, and viewing a computer terminal; these activities require close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus.
• Must have the physical ability to express or exchange ideas by means of the spoken word and convey detailed or important spoken instructions to other workers accurately, often in a group setting.
• Must have the ability to receive detailed information through oral communication.
• Must be able to work M-F 8-5 PM Eastern (7 AM-4 PM Central, 6 AM-3PM Mountain, 5 AM-2 PM Pacific)

WHAT WE OFFER: We want our Associates to stay healthy, happy, and secure! We offer you a positive work environment with supportive coworkers, managers, and leaders, plus:

• Competitive pay
• Medical, dental and vision plans with up to 80% of the premium sponsored by Sigma
• 401(k) plan with matching contributions up to 5% of salary
• Paid holidays, vacation, and sick time
• Education and professional licensing assistance programs

This job advertisement should not be interpreted as all-inclusive. It is intended to identify the major responsibilities and requirements of a job. The individual may be required to perform job-related responsibilities and tasks other than those stated in this description.

This advertisement does not constitute an employment agreement between Sigma and the employee and is subject to change by Sigma as the needs of the organization and/or the requirements of the function change.

Pay is commensurate with experience and education. Sigma is an equal opportunity employer and will not discriminate based on an employee’s race, color, gender, sexual preference, gender identity, age, religion, national origin, disability, genetic information, veteran/military status, or any other classification protected by law.

PM22

#Remote

PIa2c5343d7ffb-3631

Are you searching for a power/electronics engineering position that requires solving tough, critical challenges to increase our nation's defense capability?

Do you enjoy collaboration and striving to develop groundbreaking ideas in power system design and analysis?

If so, we're looking for someone like you to join our team at APL!

We are seeking a creative power systems/electronics engineer to help us develop next-generation power systems and associated technologies for radar, EO/IR, electronic warfare, communications, and space systems. As a member of the Power Systems Engineering Section within the Sensor Technologies Group, you'll be joining a multi-disciplined team that is advancing state-of-the-art sensor systems. This position provides an opportunity to design innovative power conversion and distribution equipment using digital control algorithms to address present-day and future challenges for multiple sponsors across various domains. The Power Systems Engineering Section focuses on developing techniques and concepts to protect the upstream electric plant against highly dynamic load profiles.

As a Power Systems/Electronics Engineer

Your primary responsibility will be to explore and develop new technologies for power systems and subsystems - working across industry, academia, and government organizations.

• You will develop state-of-the-art breadboards and advanced prototypes to support conceptual designs and trade studies.
• You will perform requirements trade-off studies, validate requirement feasibility, and perform analysis to recommend technical approaches that meet sponsor needs.
• You will create, analyze and review power system designs and concepts.
• You will evolve power systems modeling and simulation tools.
• You will provide power system expertise during system integration and performance testing not only at land-based test sites but including on the tactical systems aboard Navy ships.

You meet our minimum qualifications for the job if you...

• Have a MS in Electrical Engineering, Physics, or equivalent with 3+ years experience (or a Bachelors Degree with 5+ years) with a focus on power conversion and power systems.
• Have experience in analog and digital control theory and stability analysis.
• Have experience using Typhoon, Speedgoat, or other hardware digital control implementations to perform real-time digital control prototyping.
• Have experience in power conversion design and test of AC/DC and DC/DC converters.
• Are proficient at using in Matlab/Simulink/Simscape to analyze and simulate power converters and power systems.
• Have experience in SABER or SPICE or other circuit analysis tools.
• Have excellent verbal and written communication skills.
• Are willing and able to travel occasionally to attend meetings or test events at government or contractor sites.
• Are able to obtain an Interim Secret level security clearance prior to starting and ultimately a Secret clearance. If selected, you will be subject to a government security clearance investigation and must meet the requirements for access to classified information. Eligibility requirements include U.S. citizenship.

You'll go above and beyond our minimum requirements if you...

• Have a doctoral degree in electrical engineering with a focus on power systems or control theory.
• Have experience in thermal design and analysis.
• Have experience with generator and motor dynamic modeling.
• Have experience in magnetic design.
• Have an understanding of Naval power generation and distribution.
• Have experience with EMI/EMC testing and design mitigation techniques.
• Can help guide and mentor early career engineers.

#LI-KW1

Why Work at APL?

The Johns Hopkins University Applied Physics Laboratory (APL) brings world-class expertise to our nation’s most critical defense, security, space and science challenges. While we are dedicated to solving complex challenges and pioneering new technologies, what makes us truly outstanding is our culture. We offer a vibrant, welcoming atmosphere where you can bring your authentic self to work, continue to grow, and build strong connections with inspiring teammates.

At APL, we celebrate our differences of perspectives and encourage creativity and bold, new ideas. Our employees enjoy generous benefits, including a robust education assistance program, unparalleled retirement contributions, and a healthy work/life balance. APL’s campus is located in the Baltimore-Washington metro area. Learn more about our career opportunities at   

All qualified applicants will receive consideration for employment without regard to race, creed, color, religion, sex, gender identity or expression, sexual orientation, national origin, age, physical or mental disability, genetic information, veteran status, occupation, marital or familial status, political opinion, personal appearance, or any other characteristic protected by applicable law. APL is committed to providing reasonable accommodation to individuals of all abilities, including those with disabilities. If you require a reasonable accommodation to participate in any part of the hiring process, please contact 

The referenced pay range is based on JHU APL’s good faith belief at the time of posting. Actual compensation may vary based on factors such as geographic location, work experience, market conditions, education/training and skill level with consideration for internal parity. For salaried employees scheduled to work less than 40 hours per week, annual salary will be prorated based on the number of hours worked. APL may offer bonuses or other forms of compensation per internal policy and/or contractual designation. Additional compensation may be provided in the form of a sign-on bonus, relocation benefits, locality allowance or discretionary payments for exceptional performance. APL provides eligible staff with a comprehensive benefits package including retirement plans, paid time off, medical, dental, vision, life insurance, short-term disability, long-term disability, flexible spending accounts, education assistance, and training and development. Applications are accepted on a rolling basis.