Perception Encoder Paper Jobs in Usa
1,962 positions found — Page 84
Provides Planned Maintenance (PM), safety testing, repairs, calibration, installation, routine and emergency service to general and various specialized diagnostic and therapeutic medical equipment, as assigned by the Clinical Engineering (CE) Manager.
ESSENTIAL FUNCTIONS
Knows, understands, incorporates and demonstrates the mission, vision and core values of Trinity Health and the Ministry Organization in leadership behaviors, practices and decisions.
Performs PM procedures on multiple types of general and specialized clinical equipment.
Performs PM procedures using manufacturer’s recommendations, standards or code requirements, as well as industry acceptable processes as guidelines.
Performs corrective maintenance procedures including diagnosing problems using thermodynamic, electronic/electrical, mechanical, pneumatic, hydraulic, and/or other sciences and documents results of activities performed to comply with all regulatory and standard requirements.
Notifies equipment users, CE Managers, and Regional Director of repair status and delays as necessary.
Interacts with clinical staff to understand and resolve operational problems in scheduling and completing PM procedures while minimizing interference to hospital departments.
Determines need for replacement parts and supplies, selects the most cost effective source, and submits properly completed parts request using established policies and guidelines.
Completes corrective and planned maintenance work order documentation per policy.
Promotes teamwork by keeping others informed, participating effectively in group decision making, works to accomplish team objectives and projects, and solicits feedback about one's effectiveness as a team member.
Continually improves processes by seeking ways to eliminate and reduce waste.
Has authority (based on department guidelines) to order parts and supplies required for emergency service or repair of medical equipment. Recommends test equipment and spare equipment parts to the CE Manager or Lead Technician.
Provides on-call service coverage after normal business hours on a rotating basis, as assigned.
Provides assistance and training to Bio-Medical Equipment Technician I as assigned by Clinical Engineering Management.
May be assigned duties as Lead Bio-Medical Equipment Technician, as needed.
Performs other duties as assigned or requested by the CE Manager.
Maintains a working knowledge of applicable Federal, State and local laws/regulations; the Trinity Health Integrity and Compliance Program and Code of Conduct; as well as other policies and procedures in order to ensure adherence in a manner that reflects honest, ethical and professional behavior.
MINIMUM QUALIFICATIONSAssociates of Applied Sciences degree in medical electronics, electronic technology or related field, including comparable military training or an equivalent combination of education and experience. CBET certification preferred.
Three (3) to five (5) years' experience performing corrective and planned maintenance on medical devices and/or clinical support equipment.
Must have a basic understanding of anatomy, physiology, and medical terminology.
Working knowledge and ability to use basic hand tools and test equipment specific to the field. Ability to train CE associates on use and application of select test equipment.
Must have knowledge and understanding of OSHA, NFPA, The Joint Commission, CAHO, EOC, FDA and other specific regulations and standards pertaining to clinical equipment service and repair.
Must possess a personal presence that is characterized by a sense of honesty, integrity and caring with ability to inspire and motivate others to promote the philosophy, mission, vision, goals and values of Trinity Health, Ministry Organizations, and Clinical Engineering.
Ability to operate complex test equipment, analyze and interpret information provided by equipment and clinical staff to determine equipment operational condition.
Must have basic understanding of personal computer operation, applications, and ability to input data using keyboard. Technician must be able to follow complex written instructions, perform tasks and document actions taken.
Strong customer service communications skills are required to interact with hospital personnel and vendors to achieve positive outcomes. .
Ability to provide or coordinate in-service training to clinical/professional staff on medical device operations and safety functions.
PHYSICAL AND MENTAL REQUIREMENTS AND WORKING CONDITIONSMust be physically able to balance, bend, climb, crawl, crouch, kneel, reach, sit, squat, stand, twist, and walk.
Possess ability to mentally concentrate while being subject to stress, interruptions and changing work priorities.
Must be able to work and follow OSHA guidelines while in a hazardous environment(s) such as electrocution potentials, mechanical energies, bloodborne/airborne pathogens, dust and inclement weather, marked changes in temperature and/or humidity, radiation, fumes/vapors, sharp instruments/tools, hazardous liquids, and operating devices.
Must be able to hear speech, distinguish sounds, and speak.
Must have near vision, far vision, depth perception, and be able to distinguish colors.
Must have sensory ability to distinguish hot, cold, range of temperature, surfaces, fine motor skills, manual dexterity, and detect/distinguish odors.
Must be able to carry or lift up to 50 pounds routinely (50% of the time) and on occasion (5% of the time) up to 100 pounds.
Must be able to push or pull over 100 pounds frequently (20% of the time).
Maintains safe working environment for self, other associates, patients, visitors, and medical staff in accordance with applicable standards and procedures relevant to job duties.
Must be able to adapt to frequently changing work priorities.
Must be able to travel to the various Trinity Health, Ministry Organizations, subsidiaries, and/or training facilities.
Our Commitment
Rooted in our Mission and Core Values, we honor the dignity of every person and recognize the unique perspectives, experiences, and talents each colleague brings. By finding common ground and embracing our differences, we grow stronger together and deliver more compassionate, person-centered care. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other status protected by federal, state, or local law.
Working within assigned areas, performs on-going Planned Maintenance (PM)and Corrective Maintenance (CM) of high-level diagnostic and therapeutic imaging equipment used throughout the healthcare facility. Assists in the planning and installation of diagnostic and therapeutic imaging equipment.
ESSENTIAL FUNCTIONSKnows, understands, incorporates and demonstrates the mission, vision and core values of Trinity Health and the Ministry Organization in leadership behaviors, practices and decisions.
Meets target objectives and standards for timeliness and quality of Planned Maintenance (PM) schedules and repairs of general and specialized clinical equipment.
Responsible for maintenance, repair and servicing of specialized equipment in one or more of the following areas: CT, MRI, PAC’s, nuclear medicine, ultrasound, angiography, and radiation therapy as assigned by Clinical Engineering (CE) Manager.
Orders parts and supplies, within established departmental guidelines, that are required for the emergency service and repair of all radiological and general medical equipment.Recommend radiology related test equipment and spare equipment parts to the CE Manager.
Responsible for coordinating repairs with vendors and users when needed, this includes follow up paperwork and verification that issues are resolved.
Attends training session on imaging equipment maintenance and technology in order to keep up-to-date on technological and medical equipment advances. Conducts in-service training sessions to radiology clinical/professional staff on proper use and safety of advanced radiology equipment. Also, provides assistance and training to Biomedical Equipment Techs I, IIand Senior Biomed as assigned.
Provides on-call service coverage after normal business hours on a rotating basis, as assigned.
Maintains high level of customer satisfaction as demonstrated by customer satisfaction surveys.
Participates in teamwork by: Keeping others informed. Initiating group decision-making. Working to accomplish team objectives and projects. Seeking feedback about one’s effectiveness as a team member.
Assumes minor extra duties, including work normally assigned to Biomedical Equipment Technicians.
May be assigned duties as Lead Biomedical Equipment Technician or other duties as assigned or required.
Maintains a working knowledge of applicable Federal, State and local laws/regulations; the Trinity Health Integrity and Compliance Program and Code of Conduct; as well as other policies and procedures in order to ensure adherence in a manner that reflects honest, ethical and professional behavior.
MINIMUM QUALIFICATIONS:
Minimum of Associates of Applied Sciences Degree in related field of medical electronics, electronic technology, imaging service technology or equivalent related military training and experience. Certified Radiology Equipment Service (CRES) preferred but not required.
Five or more years of equivalent experience performing corrective and planned maintenance on nuclear medicine, diagnostic x-ray, therapeutic x-ray, ultrasound, or radiation therapy equipment, including but not limited to, R/F, Vascular/Specials, CT SIM, Mammography Units, PACS, Nuclear Cameras, Cath Lab, CT, etc. Related experience operating complex testing equipment, including but not limited to high Voltage Bleeder or Dynalyzer, Densitometer, Non-Invasive KVp meter, etc.
Must possess specialized training by manufacturer or third party equipment repair in such areas as CT, MRI, nuclear medicine, diagnostic x-ray, therapeutic x-ray, ultrasound, or radiation therapy equipment.
Must possess working knowledge of radiation physics, medical terminology, medical instrumentation, anatomy, physiology, imaging service techniques, 21 CFR (Code of Federal Regulations).
Must possess broad knowledge and understanding of OSHA, NFPA, The Joint Commission, EOC, FDA and other specific regulations and standards pertaining to clinical and radiology equipment service and repair.
Maintain up-to-date understanding of The Joint Commission and NFPA standards as well as state and federal regulations.
Ability to analyze and interpret complex information related to malfunctioning imagining equipment as described by clinical staff, then determines equipment operational condition. Follow complex written instructions, perform tasks and document actions taken to restore service.
Must be comfortable operating in a collaborative, shared leadership environment.
Must possess a personal presence that is characterized by a sense of honesty, integrity, and caring with ability to inspire and motivate others to promote the philosophy, mission, vision, goals, and values of Trinity Health, Ministry Organization, and Clinical Engineering .
Strong communication and inter-personal skills are required to interact positively with all levels of hospital personnel and vendors to achieve positive outcomes, including but not limited to physicists, physicians, administration, etc.
PHYSICAL AND MENTAL REQUIREMENTS AND WORKING CONDITIONS
Must be physically able to balance, bend, climb, crawl, crouch, kneel, reach, sit, squat, stand, twist, and walk.
Ability to mentally concentrate while being subject to interruptions and changing work priorities.
Must be able to work and follow OSHA guidelines while in a hazardous environment(s) such as electrocution potentials, mechanical energies, bloodborne/airborne pathogens, dust and inclement weather, marked changes in temperature and/or humidity, radiation, fumes/vapors, sharp instruments/tools, hazardous liquids, and operating devices
Must be able to hear speech, distinguish sounds, and speak.
Must have near vision, far vision, depth perception, and be able to distinguish colors.
Must have sensory ability to distinguish hot, cold, range of temperature, surfaces, fine motor skills, manual dexterity, and detect/distinguish odors.
Must be able to carry or lift up to 50 pounds routinely (50% of the time) and on occasion (5% of the time) up to 100 pounds.
Must be able to push or pull over 100 pounds frequently (20% of the time).
Maintains safe working environment for self, other associates, patients, visitors, and medical staff in accordance with applicable standards and procedures relevant to job duties.
Must be able to travel to the various Trinity Health, Ministry Organizations, subsidiaries, and/or training facilities
Our Commitment
Rooted in our Mission and Core Values, we honor the dignity of every person and recognize the unique perspectives, experiences, and talents each colleague brings. By finding common ground and embracing our differences, we grow stronger together and deliver more compassionate, person-centered care. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other status protected by federal, state, or local law.
Working within assigned areas, performs on-going Planned Maintenance (PM)and Corrective Maintenance (CM) of high-level diagnostic and therapeutic imaging equipment used throughout the healthcare facility. Assists in the planning and installation of diagnostic and therapeutic imaging equipment.
ESSENTIAL FUNCTIONSKnows, understands, incorporates and demonstrates the mission, vision and core values of Trinity Health and the Ministry Organization in leadership behaviors, practices and decisions.
Meets target objectives and standards for timeliness and quality of Planned Maintenance (PM) schedules and repairs of general and specialized clinical equipment.
Responsible for maintenance, repair and servicing of specialized equipment in one or more of the following areas: CT, MRI, PAC’s, nuclear medicine, ultrasound, angiography, and radiation therapy as assigned by Clinical Engineering (CE) Manager.
Orders parts and supplies, within established departmental guidelines, that are required for the emergency service and repair of all radiological and general medical equipment.Recommend radiology related test equipment and spare equipment parts to the CE Manager.
Responsible for coordinating repairs with vendors and users when needed, this includes follow up paperwork and verification that issues are resolved.
Attends training session on imaging equipment maintenance and technology in order to keep up-to-date on technological and medical equipment advances. Conducts in-service training sessions to radiology clinical/professional staff on proper use and safety of advanced radiology equipment. Also, provides assistance and training to Biomedical Equipment Techs I, IIand Senior Biomed as assigned.
Provides on-call service coverage after normal business hours on a rotating basis, as assigned.
Maintains high level of customer satisfaction as demonstrated by customer satisfaction surveys.
Participates in teamwork by: Keeping others informed. Initiating group decision-making. Working to accomplish team objectives and projects. Seeking feedback about one’s effectiveness as a team member.
Assumes minor extra duties, including work normally assigned to Biomedical Equipment Technicians.
May be assigned duties as Lead Biomedical Equipment Technician or other duties as assigned or required.
Maintains a working knowledge of applicable Federal, State and local laws/regulations; the Trinity Health Integrity and Compliance Program and Code of Conduct; as well as other policies and procedures in order to ensure adherence in a manner that reflects honest, ethical and professional behavior.
MINIMUM QUALIFICATIONS:
Minimum of Associates of Applied Sciences Degree in related field of medical electronics, electronic technology, imaging service technology or equivalent related military training and experience. Certified Radiology Equipment Service (CRES) preferred but not required.
Five or more years of equivalent experience performing corrective and planned maintenance on nuclear medicine, diagnostic x-ray, therapeutic x-ray, ultrasound, or radiation therapy equipment, including but not limited to, R/F, Vascular/Specials, CT SIM, Mammography Units, PACS, Nuclear Cameras, Cath Lab, CT, etc. Related experience operating complex testing equipment, including but not limited to high Voltage Bleeder or Dynalyzer, Densitometer, Non-Invasive KVp meter, etc.
Must possess specialized training by manufacturer or third party equipment repair in such areas as CT, MRI, nuclear medicine, diagnostic x-ray, therapeutic x-ray, ultrasound, or radiation therapy equipment.
Must possess working knowledge of radiation physics, medical terminology, medical instrumentation, anatomy, physiology, imaging service techniques, 21 CFR (Code of Federal Regulations).
Must possess broad knowledge and understanding of OSHA, NFPA, The Joint Commission, EOC, FDA and other specific regulations and standards pertaining to clinical and radiology equipment service and repair.
Maintain up-to-date understanding of The Joint Commission and NFPA standards as well as state and federal regulations.
Ability to analyze and interpret complex information related to malfunctioning imagining equipment as described by clinical staff, then determines equipment operational condition. Follow complex written instructions, perform tasks and document actions taken to restore service.
Must be comfortable operating in a collaborative, shared leadership environment.
Must possess a personal presence that is characterized by a sense of honesty, integrity, and caring with ability to inspire and motivate others to promote the philosophy, mission, vision, goals, and values of Trinity Health, Ministry Organization, and Clinical Engineering .
Strong communication and inter-personal skills are required to interact positively with all levels of hospital personnel and vendors to achieve positive outcomes, including but not limited to physicists, physicians, administration, etc.
PHYSICAL AND MENTAL REQUIREMENTS AND WORKING CONDITIONS
Must be physically able to balance, bend, climb, crawl, crouch, kneel, reach, sit, squat, stand, twist, and walk.
Ability to mentally concentrate while being subject to interruptions and changing work priorities.
Must be able to work and follow OSHA guidelines while in a hazardous environment(s) such as electrocution potentials, mechanical energies, bloodborne/airborne pathogens, dust and inclement weather, marked changes in temperature and/or humidity, radiation, fumes/vapors, sharp instruments/tools, hazardous liquids, and operating devices
Must be able to hear speech, distinguish sounds, and speak.
Must have near vision, far vision, depth perception, and be able to distinguish colors.
Must have sensory ability to distinguish hot, cold, range of temperature, surfaces, fine motor skills, manual dexterity, and detect/distinguish odors.
Must be able to carry or lift up to 50 pounds routinely (50% of the time) and on occasion (5% of the time) up to 100 pounds.
Must be able to push or pull over 100 pounds frequently (20% of the time).
Maintains safe working environment for self, other associates, patients, visitors, and medical staff in accordance with applicable standards and procedures relevant to job duties.
Must be able to travel to the various Trinity Health, Ministry Organizations, subsidiaries, and/or training facilities
Our Commitment
Rooted in our Mission and Core Values, we honor the dignity of every person and recognize the unique perspectives, experiences, and talents each colleague brings. By finding common ground and embracing our differences, we grow stronger together and deliver more compassionate, person-centered care. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other status protected by federal, state, or local law.
Provides Planned Maintenance (PM), safety testing, repairs, calibration, installation, routine and emergency service to general and various specialized diagnostic and therapeutic medical equipment, as assigned by the Clinical Engineering (CE) Manager.
ESSENTIAL FUNCTIONS
Knows, understands, incorporates and demonstrates the mission, vision and core values of Trinity Health and the Ministry Organization in leadership behaviors, practices and decisions.
Performs PM procedures on multiple types of general and specialized clinical equipment.
Performs PM procedures using manufacturer’s recommendations, standards or code requirements, as well as industry acceptable processes as guidelines.
Performs corrective maintenance procedures including diagnosing problems using thermodynamic, electronic/electrical, mechanical, pneumatic, hydraulic, and/or other sciences and documents results of activities performed to comply with all regulatory and standard requirements.
Notifies equipment users, CE Managers, and Regional Director of repair status and delays as necessary.
Interacts with clinical staff to understand and resolve operational problems in scheduling and completing PM procedures while minimizing interference to hospital departments.
Determines need for replacement parts and supplies, selects the most cost effective source, and submits properly completed parts request using established policies and guidelines.
Completes corrective and planned maintenance work order documentation per policy.
Promotes teamwork by keeping others informed, participating effectively in group decision making, works to accomplish team objectives and projects, and solicits feedback about one's effectiveness as a team member.
Continually improves processes by seeking ways to eliminate and reduce waste.
Has authority (based on department guidelines) to order parts and supplies required for emergency service or repair of medical equipment. Recommends test equipment and spare equipment parts to the CE Manager or Lead Technician.
Provides on-call service coverage after normal business hours on a rotating basis, as assigned.
Provides assistance and training to Bio-Medical Equipment Technician I as assigned by Clinical Engineering Management.
May be assigned duties as Lead Bio-Medical Equipment Technician, as needed.
Performs other duties as assigned or requested by the CE Manager.
Maintains a working knowledge of applicable Federal, State and local laws/regulations; the Trinity Health Integrity and Compliance Program and Code of Conduct; as well as other policies and procedures in order to ensure adherence in a manner that reflects honest, ethical and professional behavior.
MINIMUM QUALIFICATIONSAssociates of Applied Sciences degree in medical electronics, electronic technology or related field, including comparable military training or an equivalent combination of education and experience. CBET certification preferred.
Three (3) to five (5) years' experience performing corrective and planned maintenance on medical devices and/or clinical support equipment.
Must have a basic understanding of anatomy, physiology, and medical terminology.
Working knowledge and ability to use basic hand tools and test equipment specific to the field. Ability to train CE associates on use and application of select test equipment.
Must have knowledge and understanding of OSHA, NFPA, The Joint Commission, CAHO, EOC, FDA and other specific regulations and standards pertaining to clinical equipment service and repair.
Must possess a personal presence that is characterized by a sense of honesty, integrity and caring with ability to inspire and motivate others to promote the philosophy, mission, vision, goals and values of Trinity Health, Ministry Organizations, and Clinical Engineering.
Ability to operate complex test equipment, analyze and interpret information provided by equipment and clinical staff to determine equipment operational condition.
Must have basic understanding of personal computer operation, applications, and ability to input data using keyboard. Technician must be able to follow complex written instructions, perform tasks and document actions taken.
Strong customer service communications skills are required to interact with hospital personnel and vendors to achieve positive outcomes. .
Ability to provide or coordinate in-service training to clinical/professional staff on medical device operations and safety functions.
PHYSICAL AND MENTAL REQUIREMENTS AND WORKING CONDITIONSMust be physically able to balance, bend, climb, crawl, crouch, kneel, reach, sit, squat, stand, twist, and walk.
Possess ability to mentally concentrate while being subject to stress, interruptions and changing work priorities.
Must be able to work and follow OSHA guidelines while in a hazardous environment(s) such as electrocution potentials, mechanical energies, bloodborne/airborne pathogens, dust and inclement weather, marked changes in temperature and/or humidity, radiation, fumes/vapors, sharp instruments/tools, hazardous liquids, and operating devices.
Must be able to hear speech, distinguish sounds, and speak.
Must have near vision, far vision, depth perception, and be able to distinguish colors.
Must have sensory ability to distinguish hot, cold, range of temperature, surfaces, fine motor skills, manual dexterity, and detect/distinguish odors.
Must be able to carry or lift up to 50 pounds routinely (50% of the time) and on occasion (5% of the time) up to 100 pounds.
Must be able to push or pull over 100 pounds frequently (20% of the time).
Maintains safe working environment for self, other associates, patients, visitors, and medical staff in accordance with applicable standards and procedures relevant to job duties.
Must be able to adapt to frequently changing work priorities.
Must be able to travel to the various Trinity Health, Ministry Organizations, subsidiaries, and/or training facilities.
Our Commitment
Rooted in our Mission and Core Values, we honor the dignity of every person and recognize the unique perspectives, experiences, and talents each colleague brings. By finding common ground and embracing our differences, we grow stronger together and deliver more compassionate, person-centered care. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other status protected by federal, state, or local law.
Working within assigned areas, performs on-going Planned Maintenance (PM)and Corrective Maintenance (CM) of high-level diagnostic and therapeutic imaging equipment used throughout the healthcare facility. Assists in the planning and installation of diagnostic and therapeutic imaging equipment.
ESSENTIAL FUNCTIONSKnows, understands, incorporates and demonstrates the mission, vision and core values of Trinity Health and the Ministry Organization in leadership behaviors, practices and decisions.
Meets target objectives and standards for timeliness and quality of Planned Maintenance (PM) schedules and repairs of general and specialized clinical equipment.
Responsible for maintenance, repair and servicing of specialized equipment in one or more of the following areas: CT, MRI, PAC’s, nuclear medicine, ultrasound, angiography, and radiation therapy as assigned by Clinical Engineering (CE) Manager.
Orders parts and supplies, within established departmental guidelines, that are required for the emergency service and repair of all radiological and general medical equipment.Recommend radiology related test equipment and spare equipment parts to the CE Manager.
Responsible for coordinating repairs with vendors and users when needed, this includes follow up paperwork and verification that issues are resolved.
Attends training session on imaging equipment maintenance and technology in order to keep up-to-date on technological and medical equipment advances. Conducts in-service training sessions to radiology clinical/professional staff on proper use and safety of advanced radiology equipment. Also, provides assistance and training to Biomedical Equipment Techs I, IIand Senior Biomed as assigned.
Provides on-call service coverage after normal business hours on a rotating basis, as assigned.
Maintains high level of customer satisfaction as demonstrated by customer satisfaction surveys.
Participates in teamwork by: Keeping others informed. Initiating group decision-making. Working to accomplish team objectives and projects. Seeking feedback about one’s effectiveness as a team member.
Assumes minor extra duties, including work normally assigned to Biomedical Equipment Technicians.
May be assigned duties as Lead Biomedical Equipment Technician or other duties as assigned or required.
Maintains a working knowledge of applicable Federal, State and local laws/regulations; the Trinity Health Integrity and Compliance Program and Code of Conduct; as well as other policies and procedures in order to ensure adherence in a manner that reflects honest, ethical and professional behavior.
MINIMUM QUALIFICATIONS:
Minimum of Associates of Applied Sciences Degree in related field of medical electronics, electronic technology, imaging service technology or equivalent related military training and experience. Certified Radiology Equipment Service (CRES) preferred but not required.
Five or more years of equivalent experience performing corrective and planned maintenance on nuclear medicine, diagnostic x-ray, therapeutic x-ray, ultrasound, or radiation therapy equipment, including but not limited to, R/F, Vascular/Specials, CT SIM, Mammography Units, PACS, Nuclear Cameras, Cath Lab, CT, etc. Related experience operating complex testing equipment, including but not limited to high Voltage Bleeder or Dynalyzer, Densitometer, Non-Invasive KVp meter, etc.
Must possess specialized training by manufacturer or third party equipment repair in such areas as CT, MRI, nuclear medicine, diagnostic x-ray, therapeutic x-ray, ultrasound, or radiation therapy equipment.
Must possess working knowledge of radiation physics, medical terminology, medical instrumentation, anatomy, physiology, imaging service techniques, 21 CFR (Code of Federal Regulations).
Must possess broad knowledge and understanding of OSHA, NFPA, The Joint Commission, EOC, FDA and other specific regulations and standards pertaining to clinical and radiology equipment service and repair.
Maintain up-to-date understanding of The Joint Commission and NFPA standards as well as state and federal regulations.
Ability to analyze and interpret complex information related to malfunctioning imagining equipment as described by clinical staff, then determines equipment operational condition. Follow complex written instructions, perform tasks and document actions taken to restore service.
Must be comfortable operating in a collaborative, shared leadership environment.
Must possess a personal presence that is characterized by a sense of honesty, integrity, and caring with ability to inspire and motivate others to promote the philosophy, mission, vision, goals, and values of Trinity Health, Ministry Organization, and Clinical Engineering .
Strong communication and inter-personal skills are required to interact positively with all levels of hospital personnel and vendors to achieve positive outcomes, including but not limited to physicists, physicians, administration, etc.
PHYSICAL AND MENTAL REQUIREMENTS AND WORKING CONDITIONS
Must be physically able to balance, bend, climb, crawl, crouch, kneel, reach, sit, squat, stand, twist, and walk.
Ability to mentally concentrate while being subject to interruptions and changing work priorities.
Must be able to work and follow OSHA guidelines while in a hazardous environment(s) such as electrocution potentials, mechanical energies, bloodborne/airborne pathogens, dust and inclement weather, marked changes in temperature and/or humidity, radiation, fumes/vapors, sharp instruments/tools, hazardous liquids, and operating devices
Must be able to hear speech, distinguish sounds, and speak.
Must have near vision, far vision, depth perception, and be able to distinguish colors.
Must have sensory ability to distinguish hot, cold, range of temperature, surfaces, fine motor skills, manual dexterity, and detect/distinguish odors.
Must be able to carry or lift up to 50 pounds routinely (50% of the time) and on occasion (5% of the time) up to 100 pounds.
Must be able to push or pull over 100 pounds frequently (20% of the time).
Maintains safe working environment for self, other associates, patients, visitors, and medical staff in accordance with applicable standards and procedures relevant to job duties.
Must be able to travel to the various Trinity Health, Ministry Organizations, subsidiaries, and/or training facilities
Our Commitment
Rooted in our Mission and Core Values, we honor the dignity of every person and recognize the unique perspectives, experiences, and talents each colleague brings. By finding common ground and embracing our differences, we grow stronger together and deliver more compassionate, person-centered care. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other status protected by federal, state, or local law.
Section I: Brief Summary of the Job.
Under the supervision of the Community Development Director, the Building Official is an exempt position under FLSA. This employee is responsible for the overall guidance, direction and management of the City's building code function which includes overseeing and enforcing city codes by inspecting buildings, plumbing, electrical and mechanical systems of construction projects and existing structures within the City of Spring Hill. In addition, this employee coordinates and oversees the activities and operations related to plan review, issuance of building permits, building construction inspection services and coordination of assigned activities. This position should possess a strong mechanical aptitude, and effective organizational, public relations, customer service and communication skills.
Section II: Essential Duties of the Job.
- Oversee building code compliance, managing inspections and ensuring safety standards in construction projects.
- Ensure compliance with federal, state and local building codes and regulations including reviewing plans, issuing permits and conducting inspections.
- Analyze architectural plans and specifications to ensure they meet safety and regulatory standards.
- Perform field inspections on industrial, commercial and residential buildings.
- Enforce and abate building code violations in existing structures.
- Oversees and follows the City's adopted codes inspection and permit issuance programs.
- Serves as City flood plain manager.
- Participate in City Emergency Operations Plan as assigned and/or designated.
- Serves as plans examiner for all building permit applications.
- Determine, develop and oversee the administration of the City's building permit process including associated fee schedules.
- Provides information to contractors, developers, homeowners and the general public to assist with understanding building codes and regulations.
- Prepares and maintains staff worklog tracking inspection activity.
- Prepare and present reports on building code issues to various committees and governmental bodies.
- Continually monitor local, city, county, state, national and international building and construction codes to determine the need to create, change or remove building and construction codes for the City.
- Interpret code requirements as requested by City staff, Governing Body, fire department, residents, contractors and the general public.
- Supervise inspectors to ensure building and construction inspections are scheduled and completed in accordance with department policy and procedure.
- Establish and maintain systems to ensure all files, correspondence, reference documents, reports, permits, plans and other materials are maintained appropriately.
- Inspect non-routine and specialty building and construction projects.
- Ensure the ongoing training and education of inspectors.
- Report activities of staff to Community Development Director.
- Perform other duties as deemed necessary or assigned.
Section III: Education, Formal Training and/or Certifications.
Bachelor's degree in construction management, civil engineering, architecture or a related field required. A combination of education and experience may be considered. Master's degree in construction or related field preferred. Valid driver's license required.
- ICC certification for Commercial Building Inspector and Plans Examiner required.
- Must obtain ICC Combination Plans, Fire Plans Review and Inspection certification within 1 year of hire.
- Must obtain ICC Certified Floodplain Manager certification within 1 year of hire.
- Specialized ICC certifications such as plumbing and/or electrical desired.
- Certified Building Official (CBO) or Master Code Professional (MCP) preferred.
Five years of similar or related experience required. Two years of supervisory experience preferred.
Section V: Special Knowledge, Skills and Abilities.
A thorough knowledge of building inspections, plumbing, mechanical, and electrical systems, federal, state and local building regulations and codes is required. This employee must be able to operate computers, department vehicles, electrical testing equipment, copiers, and other office equipment. The ability to interpret building codes and regulations, to prepare reports, to understand and anticipate problems, and to understand written instructions, reports, proposals, specifications, blueprints, schematics, and code books is required. The ability to handle stress effectively, organize, set priorities and exercise independent judgement. Must be able to facilitate group processes, implement effective problem-solving solutions and build consensus. This employee should possess a strong mechanical aptitude, and effective public relations, customer service, organizational, oral and written communication skills.
Problem Solving: Problem solving is a factor in this position. This employee encounters problems with nonconformance to building codes, zoning violations, and citizen complaints.
Decision Making: Decision-making is a factor in this position. This employee makes decisions about inspecting property, resolving complaints and code violations, and performing daily duties in the safest and most efficient manner.
Supervision: This employee works under the direction of the Community Development Director and has supervisory responsibilities over Building Inspectors. Financial Accountability: This employee is responsible for the care and safe operation of department equipment, does have limited authority to purchase necessary department supplies, and participates in the annual budget process. Personal Relations: Daily contact with the general public, co-workers, supervisory personnel, and City Administrator. Occasional contact with the governing body is expected.
Section VI: Physical, Environmental, and Special Working Conditions.
Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand and walk. The employee frequently is required to use hands to finger, handle, or feel; reach with hands and arms; and talk or hear. The employee is occasionally required to sit; climb or balance; stoop, kneel, crouch, or crawl. The employee must occasionally lift and/or move up to 10 pounds. Specific vision abilities are required by this job including close vision, distance vision, color vision, depth perception, and ability to adjust focus.
Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions.
While performing the duties of this job, the employee is regularly exposed to outside weather conditions. The employee is occasionally exposed to high, precarious places; fumes or airborne particles; and risk of electrical shock.
Compensation details: 94
PIbc566d438
- receives dairy products from the milk processing plant and assembles containers in the refrigerated warehouse on pallets according to specific type, size and category.
Must be able to work a flexible schedule.
Assists machine operators.
Requires using hands to grip a metal case hook for repetitive pulling/pushing of heavy stacks of milk weighing up to 330lbs across diamond plate platform; must be physically able to lift up to 75lbs on occasion.
May work on the empty case dock moving stacks of empty cases as needed.
Work is conducted in a cold environment which averages 35 degrees Fahrenheit.
May work outdoors.
Provides quality control, housekeeping and other duties as assigned.
Requires the ability to speak and understand English.
Physical Demands: While performing the duties of this Job, the employee is regularly required to use hands to finger, handle, or feel; talk or hear and taste or smell.
The employee is constantly required to stand; walk; reach with hands and arms; climb or balance and stoop.
The employee must regularly push, pull; lift and/or move up to 75 pounds.
Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus.
Work Environment: While performing the duties of this Job, the employee is regularly exposed to cold, wet and/or humid conditions; moving mechanical parts; and the noise level in the work environment is usually moderate.
APPLY ONLINE AT: Employment is contingent upon results of post-offer background checks, drug tests functional assessments and physicals.
Hollandia Dairy is a DRUG FREE WORKPLACE Benefits Medical, dental, vision, and life Insurance Flex-125 Medical/Dependent Care Reimbursement plan Generous PTO program, holiday pay Voluntary benefits: Accident, Critical Illness, Short Term disability 401k and Merit Plan with employer match Advancement opportunities Hollandia Dairy is an Equal Employment Opportunity/Affirmative Action/Minority/Female/Vets/Disability/Sexual Orientation/Gender Identity Employer PI5173ffe3972f-7533
Job Description & Requirements Specialty: Telemetry Discipline: RN Duration: 8 weeks 48 hours per week Shift: 12 hours, nights Employment Type: Travel We're looking for Telemetry RNs for an immediate travel nurse opening in Pikeville, KY.
The right RN should have 1-2 years' recent acute care experience.
Read below for more requirements.
As a TELE Travel Nurse, you will provide care by connecting patients to machines that measure heart rate, blood pressure, breathing rate, as well as blood-oxygen levels and electrocardiogram information.
These machines then send data to computer screens for RNs to monitor.
Telemetry RNs read and interpret the data to better determine patient care.
As a TELE Travel Nurse, you should be prepared to perform the following tasks: Provide basic bedside care.
Monitor and adjust specialized equipment used on patients, and interpret and record electronic displays.
Identify irregular telemetry readings and notify appropriate medical team members.
Initiate corrective action whenever information from monitoring equipment shows adverse symptomatology.
TELE Travel Nurses should be able to stand and walk for long periods of time, as well as bend, lean and stoop without difficulty.
RNs should be able to easily lift 20 pounds.
Moving or lifting of patients may require lifting of up to 50 pounds at times.
RNs must have specific vision abilities including close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus.
Requirements
*: ACLS, BLS, NIH, 1 Year
* Additional certifications may be required before beginning an assignment.
TotalMed Travel Job ID 1395363.
Pay package is based on 12 hour shifts and 48 hours per week (subject to confirmation) with tax-free stipend amount to be determined.
Posted job title: Telemetry
- TELE RN
- Travel Nurse About TNAA TotalMed RN TotalMed is a Top Ten, travel nursing and healthcare staffing agency with the mission of igniting purpose in healthcare.
The organization staffs nurses, therapists, pharmacists, and other clinicians of all specialties in all 50 states.
They offer local and travel jobs and match caregivers with the right organization to assist both facilities and patients.
As an organization, they focus on putting highly-skilled staff into facilities to ensure adequate staffing for a better patient experience.
TotalMed specializes in recruiting and placing healthcare professionals in travel, PRN, and permanent positions across the country in Nursing and Allied Health.
Throughout 2020, the organization filled roles at even the most short-staffed facilities during the most challenging time in healthcare.
By matching the right travel healthcare professional with the right organization, TotalMed continues to offer a lifeline to facilities and their patients.
Benefits Weekly pay Guaranteed Hours Continuing Education 401k retirement plan Sick pay Wellness and fitness programs Referral bonus Employee assistance programs Medical benefits Dental benefits Vision benefits Benefits start day 15c143e31-5e48-4549-b638-05792d185386
Job Description & Requirements Specialty: Telemetry Discipline: RN Duration: 13 weeks 36 hours per week Shift: 12 hours, nights Employment Type: Travel We're looking for Telemetry RNs for an immediate travel nurse opening in Charlotte, NC.
The right RN should have 1-2 years' recent acute care experience.
Read below for more requirements.
As a TELE Travel Nurse, you will provide care by connecting patients to machines that measure heart rate, blood pressure, breathing rate, as well as blood-oxygen levels and electrocardiogram information.
These machines then send data to computer screens for RNs to monitor.
Telemetry RNs read and interpret the data to better determine patient care.
As a TELE Travel Nurse, you should be prepared to perform the following tasks: Provide basic bedside care.
Monitor and adjust specialized equipment used on patients, and interpret and record electronic displays.
Identify irregular telemetry readings and notify appropriate medical team members.
Initiate corrective action whenever information from monitoring equipment shows adverse symptomatology.
TELE Travel Nurses should be able to stand and walk for long periods of time, as well as bend, lean and stoop without difficulty.
RNs should be able to easily lift 20 pounds.
Moving or lifting of patients may require lifting of up to 50 pounds at times.
RNs must have specific vision abilities including close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus.
Requirements
*: BLS, ACLS, NIH, 2 Years
* Additional certifications may be required before beginning an assignment.
TotalMed Travel Job ID 1390000.
Pay package is based on 12 hour shifts and 36 hours per week (subject to confirmation) with tax-free stipend amount to be determined.
Posted job title: Telemetry
- TELE RN
- Travel Nurse About TNAA TotalMed RN TotalMed is a Top Ten, travel nursing and healthcare staffing agency with the mission of igniting purpose in healthcare.
The organization staffs nurses, therapists, pharmacists, and other clinicians of all specialties in all 50 states.
They offer local and travel jobs and match caregivers with the right organization to assist both facilities and patients.
As an organization, they focus on putting highly-skilled staff into facilities to ensure adequate staffing for a better patient experience.
TotalMed specializes in recruiting and placing healthcare professionals in travel, PRN, and permanent positions across the country in Nursing and Allied Health.
Throughout 2020, the organization filled roles at even the most short-staffed facilities during the most challenging time in healthcare.
By matching the right travel healthcare professional with the right organization, TotalMed continues to offer a lifeline to facilities and their patients.
Benefits Weekly pay Guaranteed Hours Continuing Education 401k retirement plan Sick pay Wellness and fitness programs Referral bonus Employee assistance programs Medical benefits Dental benefits Vision benefits Benefits start day 15c143e31-5e48-4549-b638-05792d185386
Job Description & Requirements Specialty: Interventional Radiology Technologist Discipline: Allied Health Professional Duration: Ongoing 40 hours per week Shift: 8 hours Employment Type: Staff Up to $30,000 Sign-On bonus based on experience Shift: Day Job type: Full Time Hours: Position Summary: Reporting to the Director of Imaging Services and/or designee, the Diagnostic Imaging Technologist is responsible for radiological care to patients of all ages, for the purpose of diagnosis and/or treatment of anatomical and physiologic disorders using ionizing radiation.
Must have working knowledge of conventional Radiology.
Must be able to operate all X-ray equipment and PACS.
Prepares exam room, equipment, supplies and medications for patient's procedures and is responsible for patient education.
Proven competency in addition to conventional radiography, working knowledge in at least one other area CT, MRI, or Interventional Radiology if applicable competencies are met.
May be required to take call.
1 year experience preferred for additional modalities.
License/Certificates/Credentials : Current BLS for Healthcare Providers.
Must be licensed and hold current certification in Radiologic Technology by the State of California, Radiological Health Section, Department of Health, Current license by the American Registry of Radiologic Technology (ARRT), Current Fluoroscopy permit.
If no current Fluoroscopy permit at time of hire, must obtain Fluoroscopy, permit within six (6) months of employment at DMC.
If permit is not obtained at the conclusion of six (6), months, employment with DMC will be terminated.
Physical Demands: Frequent standing/walking.
Lift/position up to 50 lbs.
Push/pull up to 50 lbs of force.
Transfer patients, reaching, stooping, bending, kneeling, crouching, manual dexterity and mobility, touch, auditory and visual perception and acuity, adequate vocal pitch and volume, ability to move quickly.
Vision Requirements: Ability to adjust vision sufficiently to perform duties Working Conditions : Regularly exposed to the risk of contagious and blood borne diseases, subject to varying and unpredictable situations, exposure to unpleasant elements (accidents, injuries, illness), emergency and crisis situations, subject to irregular hours, increased stress due to multiple calls and inquiries, occasional exposure to radiation hazards, radioactive substances and biohazard material.
LI-KB6 Tenet North Cal Job ID 2503035471.
Posted job title: Interventional Radiology Technologist Benefits Sign-On bonus5c143e31-5e48-4549-b638-05792d185386
