Pay Level 8 Basic Pay Jobs Remote Jobs in Usa
621 positions found — Page 9
- Location 1900 N SUNRISE DR, Saint Peter, MN, 56082, United States
- Base Pay $27.54 - $44.07 / Hour
- Job Category LABORATORY SERVICES
- Employee Type Non-Exempt
Description
Responsibilities:
1. Perform diagnostic laboratory procedures that provide timely and accurate test results for providers use in appropriately diagnosing and treating patients.
2. Participate in our Laboratory's Quality Assurance Plan.
3. Maintain a high level of customer satisfaction by practicing River's Edge Hospital's Standards of Behavior.
4. Understanding that the clinical Lab exists to service patients.
5. Showing initiative and/or cooperation to maintain work flow.
6. Participating in teamwork.
7. Wear a Vocera every day for your whole shift to effectively communicate with other departments and your co-workers.
8. Recognizing testing and lab priorities and act accordingly.
9. Exercising good judgment in non-routine situations.
10. Communicating effectively (orally and in writing) with other workers, supervisors, patients, and the public.
11. Communicating test results, normal ranges and specimen requirements.
12. Answering inquires about test results, methods, specificity, sensitivity, and specific factors that can influence test results.
13. Seeking assistance or clarification when needed: accepting constructive criticism.
14. Adhering to federal and state laws, regulations, and guidelines. (OSHA, CLIA)
15. Adapting to changes in practice, accepting and implementing approved changes and learning new tasks.
16. Taking responsibility for one's own career development, seeking out and participating in appropriate continuing education.
17. Managing stress and resolve conflicts.
18. Perform EKGs. (Mortara ELI 380)
1. EKG Rhythm Strip-Lead II when ordered by the provider.
2. Right sided EKG when ordered by provider.
3. Pediatric EKGs.
19. Perform only those waived, moderate, and/or high complexity tests that are authorized by the Lab Manager and require a degree skill commensurate with the individual's education, training or experience and technical abilities.
20. Follow the Lab's procedures for specimen handling and processing, test analyses, reporting and maintaining records of patient test results.
21. Properly identify and collect adequate specimens for laboratory testing via the following collection processes:
1. Venipuncture
2. Capillary collection
3. Arterial collection (Radial only)
22. Participate in proficiency testing program.
23. Adhere to the Laboratory's quality control policy and procedures; document all quality control activities, instruments and procedure calibrations and maintenance performed.
24. Follow the Lab's established polices and procedures whenever test systems are not within the Lab's established acceptable levels of performance.
25. Be capable of identifying problems that may adversely affect test performance or reporting of test results and either must correct the problem or immediately notify the Lab Manager, Senior Lab Tech, Technical Supervisor, or Clinical Consultant.
26. Document all corrective actions taken when test systems deviate from the Lab's established performance specifications.
27. Possess a working knowledge of reagent stability and storage.
28. Is knowledgeable and adheres to Patient Bill of Rights and hospital policies relating to privacy, confidentiality and respect (HIPAA).
29. Is knowledgeable in and follows and promotes facility policies and procedures including, but not limited to Infection Control, Safety, Quality Assurance, Lab's Chemical Hygiene Program, etc.
30. Must be flexible with sharing scheduled weekends, holidays, evening shift, and overnight scheduled shift.
31. Is willing to serve on facility committees when asked to do so (Employee Safety Committee).
32. Is willing to participate in CQI and other lab projects.
33. Must be flexible with sharing training duties for new employees and MLT/MLS students with other Lab personnel when requested to do so.
34. Must be trained and certified to collect Urine Drug Screens for DOT and Non-DOT employees.
Requirements
1. Have earned an Associate Degree as a Medical Laboratory Technician (MLT) or Medical Laboratory Scientist (MLS) from an accredited institution and must be ASCP Certified or equivalent. If not already certified, new graduates must be eligible for certification and obtain MLT/MLS Certification within one year of employment.
2. Must be certified with one of the following: ASCP, HEW, HHS, ASMT.
3. Must be able to travel to other work sites as needed with own transportation.
4. Certified in Basic Life Support (BLS) or will be certified within six months of hire through the American Heart Association.
Summary
This is a full-time, 1.0 FTE (80 hours per two week pay period) position in our Laboratory.
Shifts are typically 8 hours and will be primarily overnights, with some evening shifts. No more than every-other weekend.
Compensation details: 28-44 Hourly Wage
PI61aa768d87a
ADEX Healthcare Staffing LLC is seeking a travel nurse RN OR - Operating Room for a travel nursing job in Oklahoma City, Oklahoma.
Job Description & Requirements
- Specialty: OR - Operating Room
- Discipline: RN
- Start Date: 04/06/2026
- Duration: 13 weeks
- 40 hours per week
- Shift: 8 hours, days
- Employment Type: Travel
RN Position Job Notes:
Travel or Local Registered Nurse needed for ASAP start. A minimum of 2+ years of recent hospital bedside experience is required. Candidates must be able to start within 5 weeks. Opportunity for extension upon successful completion of the initial assignment. $750 referral bonus available.
Opportunity:
/n
RN - Circulator OR Adult
/n/n
Job Details:
/n
• Plan, coordinate, deliver, and evaluate nursing care for patients in the operating room environment
/n• Provide direct and indirect professional nursing care for patients whose protective reflexes or self-care abilities are potentially compromised during operative or invasive procedures
/n• Individualize patient care according to patient's health status, age level, and surgery/procedure being performed
/n• Maintain ongoing evaluation and documentation of all components of care delivered using the nursing process
/n• Apply clinical knowledge, judgment, and clinical-reasoning skills based on scientific principles
/n• Address physical, psychological, and spiritual responses of patients having operative or invasive procedures
/n• Minimum 1 year experience in acute operating room environment required
/n• At least 6 months level 1 trauma experience required
/n• Knowledge of professional nursing theory, practices, techniques and procedures required
/n• Excellent understanding of AORN Standards required
/n• Associate's Degree in Nursing from an accredited program required
/n• Current Oklahoma RN License or multistate compact RN License (eNLC) required
/n• Current Basic Life Support certification from American Heart Association required
/n• CNOR certification preferred
/n• Bachelor of Science in Nursing preferred
/n/n
Facility:
/n
This academic medical center is a leading healthcare institution that provides comprehensive medical services and serves as a major teaching hospital. The facility specializes in complex surgical procedures and trauma care, maintaining high standards for perioperative nursing care. The organization is committed to delivering excellent specialized care through teamwork and advanced medical technology, with a focus on professional development and evidence-based nursing practices.
/n/n
Location:
/n
Oklahoma City, OK
/n
Oklahoma City offers a vibrant metropolitan lifestyle with a growing healthcare sector and numerous professional development opportunities. The city provides an affordable cost of living, diverse cultural attractions, and a strong sense of community, making it an attractive location for healthcare professionals seeking career growth in a dynamic urban environment.
Adex Job ID #37046005. Pay package is based on 8 hour shifts and 40 hours per week (subject to confirmation) with tax-free stipend amount to be determined.
About ADEX Healthcare Staffing LLC
ADEX has been placing healthcare professionals across the US since 2004. Originally founded in Atlanta, GA, the company's headquarters are now located in Tampa, FL. JCAHO certified since 2009.
Benefits
- Referral bonus
Location: North Kingstown, RI
Pay Range: $24.00 - $26.00
Salary Interval: Full Time
Description: Application Instructions
About Us:
Peckham Industries Inc. (PII) has been a family-run business since 1924 and we believe our “family by choice” ethos delivers value as the trusted supplier of construction materials, products, and services in the communities we serve. Through our extensive network of hot mix asphalt and ready-mix concrete plants, quarries, and liquid asphalt terminals, PII delivers the highest quality materials and custom solutions to thousands of road construction and road maintenance customers. In addition, the company’s construction operations include paving and road reclamation services, as well as precast/prestressed concrete production and erection of multi-level parking structures, specialty buildings, and bridge components.
Become part of our mission by realizing your purpose, serving our community interests, and delivering growth for our customers. Peckham Industries educates, innovates, and applies technology in a way that is safe, sustainable, inclusive, and profitable.
Position Description
Job Summary:
The Quality Control Technician plays a critical role in supporting continuous production and ensuring compliance with State, Federal, and local specifications in our Hot Mix Asphalt (HMA) operations. This position requires a mechanically inclined, hands-on individual who is experienced and comfortable working in manual labor environments using tools, equipment, and machinery. Based at Peckham’s asphalt plant, the role also includes field work involving the collection of samples at local and regional paving sites where HMA is being placed.
Essential Functions:
1. Protect Family and Friends. Follow all Company Safety Policies and Procedures as well as Occupational Safety and Health Administration (OSHA) regulations and guidelines. Support business activities, objectives, and programs.
2. Mastery. Reliably perform all required HMA materials testing in accordance with the procedures outlined in Peckham Industries' Quality Control Program, with a focus on producing the highest quality product in the most cost-effective manner. Conduct asphalt mix testing such as gradation, asphalt content, volumetrics, and temperature checks, and accurately input results into the QC software program.
3. Ownership and caring. Maintain a strong understanding of asphalt plant production equipment and facility operations to identify, diagnose, and assist in correcting production deficiencies. Collaborate with plant management and equipment operators, maintaining awareness of production and maintenance schedules. Observe and participate in on-site HMA testing, including mat density, temperature, and compaction monitoring.
4. Communicate test results and any quality-related concerns promptly and consistently to plant management to support informed decision-making and continuous quality improvement. Act as a liaison between paving crews, contractors, and dispatch, ensuring smooth communication regarding mix quality and production timelines.
5. Results matter. Document all quality control testing clearly, accurately, and in a timely manner. Maintain a database of daily test results and ensure the testing environment is clean and safe. Ensure that laboratory equipment is properly maintained and in good working order.
6. Respect and engage. Serve as a resource to the sales team, customers, paving crews, and plant management by offering technical support and assistance related to HMA quality and performance. Recommend and assist with adjustments to mix designs or production processes to ensure compliance with job specifications.
7. Dedication. Collect and prepare HMA samples at the plant and job sites in accordance with specification requirements, including loose mix and compacted specimens for quality verification and acceptance testing.
8. Committed to serve. Perform testing of fine and coarse aggregate gradations, asphalt binder properties, and reclaimed asphalt pavement (RAP) materials, increasing testing frequency when materials fall outside of specifications. Maintain inventory of mix additives, fibers, and other specialty materials used in asphalt production.
Position Requirements
Requirements, Education and Experience:
1. Degree in construction, engineering, or related fields is preferred but not required.
2. Experience in Hot Mix Asphalt or a relatable field is encouraged. 3-5 Years of relatable knowledge preferable.
3. Must have the flexibility to work irregular hours, including days, evenings, overnights, and occasional weekends, based on customer schedules and business needs, particularly during paving operations.
4. Must currently hold or be willing to obtain applicable asphalt-related certifications (e.g., NETTCP, ACI Asphalt, or State DOT certifications, as applicable).
5. Must have experience working in hands-on, manual labor environments.
6. Comfortable using mechanical tools, equipment, and machinery.
7. Must maintain a valid driver’s license and have reliable transportation.
8. Proficient in English literacy and basic computational math; clear verbal and written communication is essential.
9. Must be computer literate and proficient in Microsoft Word, Excel, and email communications.
10. Must have legal authorization to work in the United States.
Other Duties:
Please note that this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice.
Travel:
Some travel throughout the service region is required, using a personal vehicle to access various plant and job site locations.
Work Environment/Physical Demands:
Medium Work; Exerting up to 50lbs of force occasionally, and/or up to 20lbs of force frequently, and/or up to 10lbs of force constantly to move objects. This position works on or near moving mechanical parts and loud equipment. Requires the ability to sit or stand for long periods of time as well as lifting, bending, kneeling, squatting, climbing, walking, reaching, driving, and repetitive motion.
Values:
At Peckham, you will experience our values wherever you work: corporate offices, plants, quarries, or paving operations. We share a common set of values - safety, integrity, dedication, and efficiency which are embedded in how we show up every day. Ours is a culture where we protect family and friends, our word is our bond, we are committed to serve and results matter. Our values are the foundation of our growth, and we believe we will pave the way for future success.
Equal Opportunity Employer
Peckham Industries, Inc. (PII) is an Equal Employment Opportunity (EEO) and Affirmative Action employer. It is our policy to provide EEO to all persons regardless of age, color, national origin, citizenship status, physical or mental disability, race, religion, creed, gender, sex, sexual orientation, gender identity and/or expression, genetic information, marital status, status with regard to public assistance, veteran status, pregnancy or pregnancy-related condition, or any other characteristic protected by federal, state or local law.
Under the Americans with Disabilities Act or similar law, if you have a disability and you wish to discuss potential accommodations related to applying for employment at Peckham, please contact
Compensation details: 24-26 Hourly Wage
PI75b09a5dbcb8-37156-39895466
Title: Fulfillment Associate, Full Time, Donut Shift (Sun, Mon, Thurs, Fri - 8 am - 630 pm)
Location: Bethlehem, PA
If you're looking to be at the forefront of disrupting the ecommerce industry, wanting to make your mark and be continuously challenged to grow, your time has come.
ShipBob is recognized as #1 on Crain's 2020 \"Fast 50\" list of the fastest-growing companies in Chicago & Inc.5000 top 500 companies with the most proven track records. With this growth, we are looking for top talent to help us reach the next level.
We are looking for dedicated team members to join our Weekend Shift; Saturday, Sunday, and Monday from 6 am-6:30 pm with overtime as needed which may occur on the 4th day of the week. If 3-12 hour shifts sound good to you, please keep reading!
Role Description:
Our Associates work together as a team to deliver an incredible experience for our customers every day. Dedication and commitment to excellence will set you apart as a candidate and set you up for success within our fast-growing company. At ShipBob there is a huge opportunity for career growth as we are invested in each and every employee's success in their career.
About Us:
ShipBob is a tech enabled 3PL that partners with over 4,200+ e-commerce businesses to help them be more successful online. We offer a full suite of fulfillment solutions for our merchants, including the ability to improve their transit times, shipping costs and deliver best in class experience to their customers. With almost 100% accuracy rate in fulfilling orders and orders shipped on time, our merchants can count on us to deliver excellent service.
ShipBob's growing fulfillment network is powered by our proprietary technology and acts as a back office for logistics, providing merchants with full visibility into orders, inventory levels in real time, and access to advanced analytics, over 27 integrations and data reporting.
As one of the fastest growing tech companies in Chicago with over $130M+ raised from blue-chip investors like Menlo Ventures, Bain Capital Ventures, Hyde Park Venture Partners and SoftBank Vision Fund 2, our goal is to continue to be the #1 best fulfillment technology in the industry. To help us meet this standard, we are scaling our entire team and looking for people who share our core values and have an entrepreneurial mindset
About You:
At ShipBob, we're looking for individuals who embody our core values:
* Be Mission-Driven. We want team members that are passionate about helping entrepreneurs improve their business, and bring that passion every day.
* Be Humble. We have ambitious goals, and our team members understand that success or failure depends on us working together and leaving egos at the door.
* Be Resilient. Logistics is a complicated business. So is software. We value team members that never give up and keep iterating until a problem is solved.
* Be a Creative Problem Solver. As a startup, we value smart, innovative solutions to complex problems. We fall in love with the problem, not our \"favorite\" solution.
* Be Safety Minded. It's not just talk; it's the way you work.
What You'll Do:
As an associate you will be working within one of several teams:
* Receiving: This team accepts our customers' new inventory and owns the entire process of getting that inventory put away and accepted into our system. The responsibility of communicating the arrivals and any exceptions are receiving owned as well.
* Picking: Spread across two different processes our picking team is responsible for delivering products to the next stage of the process quickly and accurately. An integral team in the warehouse, pickers and their peers keep the flow of customers products moving and keep the warehouse humming.
* Packing: The final touches before a customer receives their products, the packing team is responsible for ensuring the quality of each and every shipment as well as packing the items correctly. The packing team works together with picking to guarantee that shipments are fulfilled perfectly and owns all responsibility around those shipments.
* Other Duties as Required: We are a team which means you will be asked to help out in other areas out of your normal day to day responsibilities to ensure the operations are running efficiently.
What You'll Bring To The Table:
* Able to work scheduled shifts including overtime, and/or weekends based on business needs and consistently arrive for work on time
* Ability to lift up to 50 lbs without restriction
* Able to stand and walk continuously during and up to a 8-10 hr shift
* Able to bend, stoop, reach above, and push/pull frequently
* May be required to help out in other departments as needed
* You're willing to get your hands dirty to get a task completed
* You have the ability to adapt to change quickly
* You are extremely detailed oriented
* Ability to quickly understand new processes and identify operational opportunities
* You're looking to get your foot in the door with a rapidly growing start-up company
* Previous warehouse experience is not required. You will go through a 7 day training program!
* Must be 18 or older
We recognize that people come with a wealth of experience and talent beyond just the technical requirements of a job. If your experience is close to what you see listed here, please still consider applying. Diversity of experience and skills combined with passion is a key to innovation and excellence; therefore, we encourage people from all backgrounds to apply to our positions.
Perks and Benefits:
* Medical, Dental, Vision & Basic Life Insurance
* Variety of voluntary benefits, such as: short term disability
* Weekly paycheck with paid overtime eligibility
* $500 Quarterly Perfect Attendance Bonus Potential
* Pay progression program
* KinderBob Daycare Stipend program
* Paid Time Off & Sick Time Off
* Referral Bonus Program
* Fun Culture >>> Check us out on Instagram
Reports to: Area Manager
Classification: Hourly/Non-Exempt
ShipBob provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.
This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.
Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice.
Are you passionate about the patient experience? At HCA Healthcare, we are committed to caring for patients with purpose and integrity. We care like family! Jump-start your career as a(an) Advanced Cardiac Stepdown Patient Care Technician today with Portsmouth Regional Hospital.
BenefitsPortsmouth Regional Hospital, offers a total rewards package that supports the health, life, career and retirement of our colleagues. The available plans and programs include:
- Comprehensive medical coverage that covers many common services at no cost or for a low copay. Plans include prescription drug and behavioral health coverage as well as free telemedicine services and free AirMed medical transportation.
- Additional options for dental and vision benefits, life and disability coverage, flexible spending accounts, supplemental health protection plans (accident, critical illness, hospital indemnity), auto and home insurance, identity theft protection, legal counseling, long-term care coverage, moving assistance, pet insurance and more.
- Free counseling services and resources for emotional, physical and financial wellbeing
- 401(k) Plan with a 100% match on 3% to 9% of pay (based on years of service)
- Employee Stock Purchase Plan with 10% off HCA Healthcare stock
- Family support through fertility and family building benefits with Progyny and adoption assistance.
- Referral services for child, elder and pet care, home and auto repair, event planning and more
- Consumer discounts through Abenity and Consumer Discounts
- Retirement readiness, rollover assistance services and preferred banking partnerships
- Education assistance (tuition, student loan, certification support, dependent scholarships)
- Colleague recognition program
- Time Away From Work Program (paid time off, paid family leave, long- and short-term disability coverage and leaves of absence)
- Employee Health Assistance Fund that offers free employee-only coverage to full-time and part-time colleagues based on income.
Learn more about Employee Benefits
Note: Eligibility for benefits may vary by location.
Come join our team as a(an) Advanced Patient Care Technician. We care for our community! Just last year, HCA Healthcare and our colleagues donated $13.8 million dollars to charitable organizations. Apply Today!
Job Summary and QualificationsAs an Advanced Patient Care Technician (PCT), you will be an important part of delivering compassionate, patient-centered care. Under the guidance of a registered nurse, you will perform advanced clinical tasks and help create a safe, welcoming environment where patients and families feel valued and respected.
- Observe patients, document changes, and communicate them with the nursing team
- Help patients with daily needs (ADLs) such as eating, drinking, bathing, and moving safely
- Provide advanced care, including phlebotomy, telemetry monitoring, removing IV lines and catheters, and care for wounds
- Assist with supporting tasks like collecting lab samples and assisting with clerical duties to keep care running smoothly
- Look ahead to what patients might need, respond quickly, and help ensure every experience feels seamless and compassionate
- Basic Cardiac Life Support must be obtained within 30 days of employment start date
- Nonviolent Crisis Intervention must be obtained within 90 days of employment start date
- (CNA) Certified Nursing Assistant
- High School Graduate / GED
At Portsmouth Regional Hospital, you're not just joining a hospital—you’re becoming part of a mission-driven team that’s redefining healthcare excellence across the Seacoast region. As a 240-bed acute care facility in Portsmouth, NH, we proudly serve communities throughout New Hampshire, Maine, and Massachusetts. We’re the only hospital in the area to be recognized as an ACS Verified Level II Trauma Center and a Comprehensive Stroke Center, and we offer a robust heart and vascular program—giving our team the opportunity to work at the forefront of life-saving care.
As part of the HCA Healthcare family, you’ll be supported by one of the nation’s leading healthcare systems, with a strong presence in New Hampshire that includes four hospitals, three freestanding emergency rooms, and over 70 care sites. Here, nearly 5,000 colleagues—including 1,500 nurses and 1,000 affiliated physicians—collaborate to deliver exceptional care and innovation every day. Whether you're at Portsmouth, Catholic Medical Center in Manchester, Parkland Medical Center in Derry, Frisbie Memorial Hospital in Rochester, or one of our emergency facilities in Seabrook, Dover, or Plaistow, you’ll find a culture that values your expertise, supports your growth, and empowers you to make a real difference.
HCA Healthcare has been recognized as one of the World's Most Ethical Companies® by the Ethisphere Institute more than ten times. In recent years, HCA Healthcare spent an estimated $3.7 billion in cost for the delivery of charitable care, uninsured discounts, and other uncompensated expenses.
"The great hospitals will always put the patient and the patient's family first, and the really great institutions will provide care with warmth, compassion, and dignity for the individual."- Dr. Thomas Frist, Sr.
HCA Healthcare Co-Founder
If you are looking for an opportunity that provides satisfaction and personal growth, we encourage you to apply for our Advanced Patient Care Technician opening. We promptly review all applications. Highly qualified candidates will be contacted for interviews. Unlock the possibilities and apply today!
We are an equal opportunity employer. We do not discriminate on the basis of race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status.
Are you passionate about the patient experience? At HCA Healthcare, we are committed to caring for patients with purpose and integrity. We care like family! Jump-start your career as a(an) Neuro Trauma Patient Care Technician today with Portsmouth Regional Hospital.
BenefitsPortsmouth Regional Hospital, offers a total rewards package that supports the health, life, career and retirement of our colleagues. The available plans and programs include:
- Comprehensive medical coverage that covers many common services at no cost or for a low copay. Plans include prescription drug and behavioral health coverage as well as free telemedicine services and free AirMed medical transportation.
- Additional options for dental and vision benefits, life and disability coverage, flexible spending accounts, supplemental health protection plans (accident, critical illness, hospital indemnity), auto and home insurance, identity theft protection, legal counseling, long-term care coverage, moving assistance, pet insurance and more.
- Free counseling services and resources for emotional, physical and financial wellbeing
- 401(k) Plan with a 100% match on 3% to 9% of pay (based on years of service)
- Employee Stock Purchase Plan with 10% off HCA Healthcare stock
- Family support through fertility and family building benefits with Progyny and adoption assistance.
- Referral services for child, elder and pet care, home and auto repair, event planning and more
- Consumer discounts through Abenity and Consumer Discounts
- Retirement readiness, rollover assistance services and preferred banking partnerships
- Education assistance (tuition, student loan, certification support, dependent scholarships)
- Colleague recognition program
- Time Away From Work Program (paid time off, paid family leave, long- and short-term disability coverage and leaves of absence)
- Employee Health Assistance Fund that offers free employee-only coverage to full-time and part-time colleagues based on income.
Learn more about Employee Benefits
Note: Eligibility for benefits may vary by location.
Come join our team as a(an) Patient Care Technician. We care for our community! Just last year, HCA Healthcare and our colleagues donated $13.8 million dollars to charitable organizations. Apply Today!
Job Summary and QualificationsAs a Patient Care Technician with Surgical Ventures Group, you will be a crucial member of our collaborative nursing care team, delivering hands-on care and helping create a safe, welcoming environment for patients. Your support brings comfort, dignity, and connection to those who need it most – and helps make our mission to improve lives a reality for patients every day.
Your responsibilities will include:
- Assisting with patient preparation, mobility, transfers, and comfort to support smooth procedures and recovery
- Providing non-medicated care like dressing changes, skin protection, and use of supportive devices
- Keeping patient areas, operating rooms, and common spaces clean, organized, and stocked to maintain safety and efficiency
- Managing supplies, equipment, and environmental logs to keep the team ready and protect patients through infection control
- Communicating kindly with patients, families, and the care team while promoting safety and quality efforts
- Basic Cardiac Life Support must be obtained within 30 days of employment start date
- (CNA) Certified Nursing Assistant
- High School Graduate / GED
At Portsmouth Regional Hospital, you're not just joining a hospital—you’re becoming part of a mission-driven team that’s redefining healthcare excellence across the Seacoast region. As a 240-bed acute care facility in Portsmouth, NH, we proudly serve communities throughout New Hampshire, Maine, and Massachusetts. We’re the only hospital in the area to be recognized as an ACS Verified Level II Trauma Center and a Comprehensive Stroke Center, and we offer a robust heart and vascular program—giving our team the opportunity to work at the forefront of life-saving care.
As part of the HCA Healthcare family, you’ll be supported by one of the nation’s leading healthcare systems, with a strong presence in New Hampshire that includes four hospitals, three freestanding emergency rooms, and over 70 care sites. Here, nearly 5,000 colleagues—including 1,500 nurses and 1,000 affiliated physicians—collaborate to deliver exceptional care and innovation every day. Whether you're at Portsmouth, Catholic Medical Center in Manchester, Parkland Medical Center in Derry, Frisbie Memorial Hospital in Rochester, or one of our emergency facilities in Seabrook, Dover, or Plaistow, you’ll find a culture that values your expertise, supports your growth, and empowers you to make a real difference.
HCA Healthcare has been recognized as one of the World's Most Ethical Companies® by the Ethisphere Institute more than ten times. In recent years, HCA Healthcare spent an estimated $3.7 billion in cost for the delivery of charitable care, uninsured discounts, and other uncompensated expenses.
"The great hospitals will always put the patient and the patient's family first, and the really great institutions will provide care with warmth, compassion, and dignity for the individual."- Dr. Thomas Frist, Sr.
HCA Healthcare Co-Founder
If you are looking for an opportunity that provides satisfaction and personal growth, we encourage you to apply for our Patient Care Technician opening. We promptly review all applications. Highly qualified candidates will be contacted for interviews. Unlock the possibilities and apply today!
We are an equal opportunity employer. We do not discriminate on the basis of race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status.
Job Description
At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.
Boeing Commercial Airplanes is excited to offer opportunities for a Silk Screener Decorative Panels B to join our Joint and Installation team in Everett Washington.
Join our innovative team as a Silk Screener for Decorative Panels. In this dynamic position, you will set up and execute multicolor silk screen printing operations, ensuring precise alignment and registration to create stunning instrument panels. Your expertise in mixing and matching paints will guarantee that each print meets our high standards for color consistency and clarity. Collaborating closely with various departments, you will coordinate the distribution of decals and maintain an organized inventory, all while adhering to safety regulations for hazardous materials. If you are passionate about combining creativity with technical skill in a fast-paced environment, we invite you to be a part of our mission to deliver exceptional decorative solutions.
You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.
Position Responsibilities:
- Set up and perform multicolor decorative silk screen printing operations according to established procedures.
- Align and adjust the silk screen to achieve proper contact and registration, applying paint using the squeegee method.
- Layout, locate, and apply lettering on various instrument panels using silk screening and related processes.
- Liaise with the Decal Area and other departments to coordinate changes, distribution of decals, and maintain perpetual inventory.
- Work from blueprints, specifications, and verbal instructions to complete assignments accurately.
- Clean silk screens and maintain tools and equipment to ensure quality printing.
- Mix and match paint to established color samples, ensuring consistency and accuracy.
- Obtain work orders and necessary materials, including inks and substrates, while adhering to safety data sheet guidelines.
- Perform hand setup for contact printing, including loading silk screens and applying ink to substrates.
- Operate the silk screen machine, managing the printing process for multiple colors and ensuring quality control.
- Check ink color using a color spectrometer and make adjustments as needed to match specifications.
- Perform rework and touch-ups on decorative interior parts using appropriate tools and techniques.
- Handle and dispose of hazardous materials in compliance with safety regulations.
- Maintain records of work performed and refile work packets in the ink room filing cabinet.
- Communicate with team leaders and supervisors regarding job progress, issues, and assistance needed.
Physical Demands and Potential Hazards:
- Perform physical tasks that include lifting weights ranging from 10-15 lbs. to 15-35 lbs.
- Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.
- Work in environments that may involve contact with metals, solvents, and coolants.
- Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.
- Adapt to varying noise levels and atmospheric conditions.
- Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.
This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.
This position must meet Export Control compliance requirements, therefore a "US Person" as defined by 22 C.F.R. § 120.15 is required. "US Person" includes US Citizen, lawful permanent resident, refugee, or asylee
Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.
Basic Qualifications:
- 1+ years of experience silk screen printing.
- Experience mixing and color matching water based inks.
- Experience handling and disposing of hazardous materials per government regulations.
- Ability to recognize colors.
- Ability to walk constantly throughout the workday; stand 6-8 hours per day; climb or work from stairs/steps up to 8 hours per day; climb ladders; bend and twist frequently up to six hours per day; squat and kneel.
- This position requires you to wear eye, hearing, foot, hand, respirator and other personal protective equipment/safety gear at all times.
Preferred Qualifications:
- Perform ink formulation (e.g. measure ink by weight, machine mix ink, apply ink to test specimen, dry in oven).
- Experience working with overhead crane.
- Enrolled in a Boeing partnered manufacturing related high school or community and technology college academic program
Typical Education & Experience:
High school graduate or GED preferred.
Drug Free Workplace
Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.
Union Representation Statement:
This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.
Shift Work Statement:
- This position is for a variety of shifts
Total Rewards & Pay Transparency:
At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.
The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.
The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.
Pay is based upon candidate experience and qualifications, as well as market and business considerations.
Summary pay range: $25.00 – $49.92 per hour
Applications for this position will be accepted until May. 29, 2026
Language Requirements
English Preferred
Relocation
Relocation assistance is not a negotiable benefit for this position.
Visa Sponsorship
Employer will not sponsor applicants for employment visa status.
Shift
This position is for variable shift
Equal Opportunity Employer:
Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
Job Description
At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.
Boeing Commercial Airplanes is excited to offer opportunities for a Press Operator, Hydraulic & Mechanical A, to join our Fabrication team in Algona, Auburn, and Everett Washington.
As a Press Operator Hydraulic & Mechanical A, you will be a vital part of our manufacturing team, responsible for setting up and operating hydraulic and mechanical presses to shape and form various materials. Your role will involve obtaining work packages, performing safety checks, and ensuring that all equipment is properly set up and maintained. You will utilize your technical skills to troubleshoot issues, verify material quality, and collaborate with team members to optimize production processes. Your attention to detail and commitment to excellence will directly contribute to our operational success.
You will play a critical role in upholding our commitment to safety and quality standards and ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and join our mission to deliver excellence in aviation.
Position Responsibilities:
Obtain work package from the ready-to-work rack, work board, or assigned by Team Lead, or run previously set-up jobs by reviewing tie-ins from prior operators.
Operate a computer to access information from prints, sketches, drawings, layout documents, and Boeing (BAC) specifications.
Perform safety checks on machines, ensuring the area is clear of obstacles, power switches are off, and safety guards are installed.
Move heavy materials, equipment, tools, and dies to the work area using stackers, Kalamar, die loaders, or overhead cranes, asking for assistance as needed.
Check steam lines for cracks or cuts and verify o-rings are properly seated prior to hookup.
Preheat dies and punches using electricity or steam, and verify temperature accuracy for hot dies with a temperature stick or pyrometer.
Determine machine setup by reviewing work orders, tooling usage instructions, and die setup charts, making adjustments as required.
Load and secure dies into the press, checking for defects and torquing as necessary.
Examine tools, dies, and fixtures for damage, separating them using appropriate handling procedures.
Set up press cycle programs using control panels or manual switches to adjust height, stroke, pressure, and cycle time.
Develop patterns when necessary, cutting and tailoring materials like fiberglass and graphite to die requirements.
Perform pull-outs on various types of metal and alloy tubes using a hydraulic tube pull-out machine.
Verify that materials are free from burrs and debris, using hand deburring tools and denatured alcohol prior to forming operations.
Consult with Team Lead and other personnel (e.g., engineering, planning, inspection) on process or job-related issues as required.
Maintain a written tie-in book or electronic communication to coordinate with other shifts and dispose of hazardous materials in an approved manner.
Physical Demands and Potential Hazards:
Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.
Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.
Work in environments that may involve contact with metals, solvents, and coolants.
Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.
Adapt to varying noise levels and atmospheric conditions.
Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.
This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.
This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 120.62 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee
Resumes of current Puget Sound Boeing employees submitted via “Find Jobs” in Boeing/Workday will be considered as this job is not installed in QTTP (Quality Through Training Program).
Basic Qualifications
1+ Years of experience setting and using precision measuring tools; equipment such as micrometers, calipers, and/or dial indicators?
1+ Years of experience reading blueprints and structural drawings.
1+ Years of experience operating a hydraulic press.
Must be able to lift, push and pull up to 35 pounds frequently within an 8 hour shift.
Preferred Qualifications:
Must be able to stand, twist, bend, kneel and occasional crawling within an 8 hour shift.
Ability to work in noisy environments while completing tasks.
Typical Education & Experience:
High school graduate or GED preferred.
Relocation:
Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.
Drug Free Workplace
Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.
Union Representation Statement:
This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.
Shift Work Statement:
This position is for a variety of shifts.
Total Rewards & Pay Transparency
At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.
The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.
The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.
Pay: $26.32/hour, with potential to earn up to $56.36/hour in accordance with the terms of the relevant collective bargaining agreement.
Applications for this position will be accepted until Mar. 31, 2026
Language Requirements
English Preferred
Relocation
Relocation assistance is not a negotiable benefit for this position.
Visa Sponsorship
Employer will not sponsor applicants for employment visa status.
Shift
This position is for variable shift
Equal Opportunity Employer:
Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
Job Description
At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.
Boeing Commercial Airplanes is excited to offer opportunities for an Inspector Integral Fuel Cells to join our Quality team in Everett and Renton, Washington.
As an Inspector for Integral Fuel Cells, you will be crucial in maintaining the integrity and safety of our aircraft operations. This position requires working in confined spaces within the wing fuel cells, where employees must crawl through an opening of 9.5” x 17.7" to access the fuel cell. Your expertise will be vital in inspecting the cleaning, sealing, and coating processes, as well as conducting thorough leak checks to identify and resolve any issues. Collaborating closely with Engineering, Quality, and Manufacturing teams, you will implement improvements in build processes and drive initiatives for defect reduction. Certification for visual acuity and color perception may also be required. Your ability to use precision measuring instruments and interpret technical documentation will ensure that all components meet stringent specifications, allowing you to make a significant impact on our operations.
You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.
Position Responsibilities:
Inspect preparatory cleaning, application of sealant, protective coatings, and leak detection coatings of integral fuel cells.
Perform and witness leak checks, determining the source of leaks and evaluating the extent of repairs required.
Inspect final assemblies, subassemblies, and installations of parts and systems for workmanship, fit, alignment, and conformance with applicable drawings and specifications.
Collaborate with Engineering, Quality, and Manufacturing to evaluate and coordinate improvements in build processes and defect reduction initiatives.
Initiate and document any nonconforming materials or assemblies according to specifications and procedures.
Conduct audits and surveillance of manufacturing and quality assurance processes to ensure compliance.
Use precision measuring instruments and shop mathematics to verify that all parts and assemblies meet quality requirements.
Review manufacturing plans and other documentation for completeness and compliance, identifying any discrepancies.
Perform in-process inspections, including checks for torque, sealant applications, and electrical bonding.
Document any discrepancies and report them to the appropriate personnel for resolution.
Verify that parts and assemblies have been properly cleaned and that sealants, primers, and finishes are applied per specifications.
Witness and document functional tests of aircraft components and systems to detect leaks.
Perform shakedown inspections on completed assemblies prior to customer acceptance, documenting any discrepancies.
Maintain personal and tool certifications, ensuring compliance with operational standards.
Assist and train other employees on inspection methods and procedures, providing guidance as needed.
Physical Demands and Potential Hazards:
Perform physical tasks that include lifting weights ranging from 10-15 lbs. to 15-35 lbs.
Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting. Work in environments that may involve contact with metals, solvents, and coolants.
Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.
Adapt to varying noise levels and atmospheric conditions.
Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.
This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.
This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.62 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee
Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.
Basic Qualifications:
2+ years of experience as a Quality Inspector or in a related inspection role within a similar industry, such as, but not limited to, Aerospace and Manufacturing.
Ability to work in confined spaces (work within or pass through). Entry diameter 9.5”X17.7”.
Ability to complete Fall Protection Training.
Ability to walk constantly throughout the workday; stand 6-8 hours per day; climb or work from stairs/steps up to 8 hours per day; climb ladders; bend and twist frequently up to six hours per day; squat and kneel.
Ability to use a respirator or have been respirator certified.
Proficiency in reading, writing, and speaking English.
Preferred Qualifications:
Experience working with precision measuring tools.
Experience sealing
Conflict of Interest:
Successful candidates for this position must successfully complete the Company’s Conflict of Interest (COI) assessment process.
Typical Education & Experience:
High school graduate or GED preferred.
Relocation:
Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.
Drug Free Workplace:
Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.
Union Representation Statement:
This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.
Shift Work Statement:
This position is for a variety of shifts.
Total Rewards & Pay Transparency:
At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.
The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.
The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.
Pay: $27.32/hour, with potential to earn up to $57.88/hour in accordance with the terms of the relevant collective bargaining agreement.
Applications for this position will be accepted until Aug. 31, 2026
Language Requirements
English Preferred
Relocation
Relocation assistance is not a negotiable benefit for this position.
Visa Sponsorship
Employer will not sponsor applicants for employment visa status.
Shift
This position is for variable shift
Equal Opportunity Employer:
Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
Job Description
At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.
Boeing Commercial Airplanes is excited to offer opportunities for an Inspector Tooling and Machined Parts to join our Quality team in Puget Sound in Washington.
As an Inspector for Tooling and Machined Parts, you will be essential in ensuring the highest standards of quality and safety in our manufacturing processes. Your keen attention to detail will enable you to conduct thorough inspections of tooling and machined parts, verifying compliance with stringent specifications and quality standards. To excel in this role, it is important to note that employees must pass visual acuity and color perception eye examination tests to ensure accuracy in evaluations. You will collaborate closely with engineering and quality assurance teams to identify and resolve any discrepancies, ensuring that all components meet operational requirements. Your expertise will also be critical in performing audits and surveillance of manufacturing processes, contributing to continuous improvement initiatives.
You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.
Position Responsibilities:
Obtain daily work assignments from the team leader or supervisor and review work orders and blueprints to determine required tasks.
Inspect preparatory cleaning, application of sealant, protective coatings, and leak detection coatings of integral fuel cells.
Perform and witness leak checks, determining the source of leaks and evaluating the extent of repairs required.
Collaborate with Engineering, Quality, and Manufacturing to evaluate and coordinate improvements in build processes and defect reduction initiatives.
Initiate and document any nonconforming materials or assemblies according to specifications and procedures.
Conduct audits and surveillance of manufacturing and quality assurance processes to ensure compliance.
Use precision measuring instruments and shop mathematics to verify that all parts and assemblies meet quality requirements.
Review manufacturing plans and other documentation for completeness and compliance, identifying any discrepancies.
Inspect mockups of engineering design changes to ensure adherence to specifications.
Perform line checks to investigate whether rejectable conditions exist on other assemblies or airplanes.
Indicate Quality Assurance acceptance by stamping the appropriate paperwork and processing completed records.
Review previously accepted systems, customer requirements, or FAA conformities to determine if re-inspection is required.
Work with engineering and the FAA on red label equipment to ensure proper segregation from production parts.
Document discrepancies and report them to the appropriate personnel for resolution.
Assist in the training and instruction of lower-grade inspectors, providing guidance as needed.
Physical Demands and Potential Hazards:
Perform physical tasks that include lifting weights ranging from 10-15 lbs. to 15-35 lbs.
Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.
Work in environments that may involve contact with metals, solvents, and coolants.
Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.
Adapt to varying noise levels and atmospheric conditions.
Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.
This position is expected to be 100% onsite. The selected candidate will be required to work on-site at one of the listed location options.
This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee
Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.
Basic Qualifications:
3+ years of experience reading and interpreting engineering drawings and specifications (e.g., blueprint/schematic reading, specification, change, design).
3+ years of experience in setting and using precision measuring tools and equipment such as micrometers, calipers, and/or dial indicators.
1+ years of experience calibrating and/or using coordinate measurement machines, laser trackers, and/or optical measurement devices.
Experience as a Quality Inspector.
Experience working with Microsoft Office (Excel, Word, PowerPoint).
Ability to walk constantly throughout the workday; stand 6-8 hours per day; climb or work from stairs/steps up to 8 hours per day; climb ladders; bend and twist frequently up to six hours per day; squat and kneel.
Ability to complete Fall Protection Training.
Preferred Qualifications:
Experience inspecting welds / welds certification
Equivalent education and/or related work experience (Higher education includes college, university, technical school, licensing/certification programs, etc.)
Typical Education & Experience:
High school graduate or GED preferred.
Relocation:
Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.
Drug Free Workplace:
Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.
Union Representation Statement:
This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.
Shift Work Statement:
This position is for a variety of shifts
Total Rewards & Pay Transparency:
At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.
The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.
The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.
Pay: $31.32/hour, with potential to earn up to $59.47/hour in accordance with the terms of the relevant collective bargaining agreement.
Applications for this position will be accepted until Mar. 27, 2026
Language Requirements
English Preferred
Relocation
Relocation assistance is not a negotiable benefit for this position.
Visa Sponsorship
Employer will not sponsor applicants for employment visa status.
Shift
This position is for variable shift
Equal Opportunity Employer:
Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
