Pay Level 8 Basic Pay Jobs Remote Jobs in Usa
575 positions found — Page 7
Location: Chicago, Illinois
Business Unit: Rush Medical Center
Hospital: Rush University Medical Center
Department: Diag Srvcs-X-Ray
Work Type: Full Time (Total FTE 1. 0)
Shift: Shift 2
Work Schedule: 8 Hr (3:00 PM - 11:30 PM)
Rush offers exceptional rewards and benefits learn more at our Rush benefits page ( /rush-careers/employee-benefits).
Pay Range: $27.47 - $43.27 per hour
Rush salaries are determined by many factors including, but not limited to, education, job-related experience and skills, as well as internal equity and industry specific market data. The pay range for each role reflects Rush’s anticipated wage or salary reasonably expected to be offered for the position. Offers may vary depending on the circumstances of each case.
Summary:
Provides quality patient care in an efficient and cost-effective manner. Applies knowledge of the modality to produce quality diagnostic images. Exemplifies the Rush mission, vision and values and acts in accordance with Rush policies and procedures including complying with all Rush University Medical Center Customer Service Standards. Exemplifies the Rush mission, vision and values and acts in accordance with Rush policies and procedures.
Other information:
Required Job Qualifications:
•Formal training in an accredited Radiologic Technology Program.
•Valid Illinois Emergency Management Agency (IEMA) license.
•Registry or Registry-eligible with the American Registry of Radiologic Technologists.
•Proficient in modality physics and operation of equipment.
•Knowledge of human anatomy, pathology and physiology.
•Demonstrates good interpersonal and communication skills and ability to work in a team-oriented environment.
•LEVEL 1JC (Job #2381): Radiography registry - Proficient in basic X-ray exams.
•LEVEL 2JC (Job #2383): Proficient in 2 modalities: Meets Level 1 requirements AND proficient in OPERATING ROOM X-RAY OR GI-FLUORO OR ECG OR PHLEBOTOMY OR CLINICAL INSTRUCTOR.
•LEVEL 3JC (Job #2386): Proficient in 3 modalities; meets Level 2 requirements AND proficient in OPERATING ROOM X-RAY OR GI-FLUORO OR ECG OR PHLEBOTOMY OR CLINICAL INSTRUCTOR.
•LEVEL 4JC (Job #3383): Proficient in 4 modalities; meets Level 3 requirements AND proficient in OPERATING ROOM X-RAY OR GI-FLUORO OR ECG OR PHLEBOTOMY OR CLINICAL INSTRUCTOR.
Physical Demands:
•Requires full range body motion including handling and lifting patients when necessary.
•Requires manual and finger dexterity and eye-hand coordination.
Responsibilities:
1. Provides quality patient care as defined by departmental and Age Specific standards of care.
2. Maintains patient privacy and confidentiality.
3. Follows departmental protocols and procedures in the performance of exams and produces work that meets quality standards.
4. Produces work in an efficient manner that meets departmental productivity standards.
5. Maintains the physical work environment in a manner that meets departmental and regulatory requirements.
6. Has a working knowledge of the imaging systems, Radiology Information System and PACS.
7. Reports supply shortage or equipment failure to section supervisor.
8. Follows work and patient schedules.
9. Assist Radiologist in the performance of procedures.
10. Handles, administers and documents medications under the supervision of a radiologist and following the guidelines of the Rush Pharmacy and technical licensure.
11. Maintains logs and documentation as per departmental protocol.
12. Provides patient history or information necessary for proper interpretation of the procedure.
13. Maintains licensure/registry status as determined by state or regulatory bodies.
14. Participates in the training and development of students assigned to area through clinical affiliations.
Rush is an equal opportunity employer. We evaluate qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, and other legally protected characteristics.
Location: Chicago, Illinois
Business Unit: Rush Medical Center
Hospital: Rush University Medical Center
Department: Diag Srvcs-X-Ray
Work Type: Full Time (Total FTE 1. 0)
Shift: Shift 3
Work Schedule: 8 Hr (11:00 PM - 7:30 AM)
Rush offers exceptional rewards and benefits learn more at our Rush benefits page ( /rush-careers/employee-benefits).
Pay Range: $27.47 - $43.27 per hour
Rush salaries are determined by many factors including, but not limited to, education, job-related experience and skills, as well as internal equity and industry specific market data. The pay range for each role reflects Rush’s anticipated wage or salary reasonably expected to be offered for the position. Offers may vary depending on the circumstances of each case.
Summary:
Provides quality patient care in an efficient and cost-effective manner. Applies knowledge of the modality to produce quality diagnostic images. Exemplifies the Rush mission, vision and values and acts in accordance with Rush policies and procedures including complying with all Rush University Medical Center Customer Service Standards. Exemplifies the Rush mission, vision and values and acts in accordance with Rush policies and procedures.
Required Job Qualifications:
•Formal training in an accredited Radiologic Technology Program.
•Valid Illinois Emergency Management Agency (IEMA) license.
•Registry or Registry-eligible with the American Registry of Radiologic Technologists.
•Proficient in modality physics and operation of equipment.
•Knowledge of human anatomy, pathology and physiology.
•Demonstrates good interpersonal and communication skills and ability to work in a team-oriented environment.
•LEVEL 1JC (Job #2381): Radiography registry - Proficient in basic X-ray exams.
•LEVEL 2JC (Job #2383): Proficient in 2 modalities: Meets Level 1 requirements AND proficient in OPERATING ROOM X-RAY OR GI-FLUORO OR ECG OR PHLEBOTOMY OR CLINICAL INSTRUCTOR.
Physical Demands:
•Requires full range body motion including handling and lifting patients when necessary.
•Requires manual and finger dexterity and eye-hand coordination.
Responsibilities:
1. Provides quality patient care as defined by departmental and Age Specific standards of care.
2. Maintains patient privacy and confidentiality.
3. Follows departmental protocols and procedures in the performance of exams and produces work that meets quality standards.
4. Produces work in an efficient manner that meets departmental productivity standards.
5. Maintains the physical work environment in a manner that meets departmental and regulatory requirements.
6. Has a working knowledge of the imaging systems, Radiology Information System and PACS.
7. Reports supply shortage or equipment failure to section supervisor.
8. Follows work and patient schedules.
9. Assist Radiologist in the performance of procedures.
10. Handles, administers and documents medications under the supervision of a radiologist and following the guidelines of the Rush Pharmacy and technical licensure.
11. Maintains logs and documentation as per departmental protocol.
12. Provides patient history or information necessary for proper interpretation of the procedure.
13. Maintains licensure/registry status as determined by state or regulatory bodies.
14. Participates in the training and development of students assigned to area through clinical affiliations.
Rush is an equal opportunity employer. We evaluate qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, and other legally protected characteristics.
New Graduate & Experienced Nurses Welcome!
Launch your nursing career with Mercy Hospital South’s RN Residency Program. Our units provide the hands-on experience, mentorship, and team support new nurses need to build confidence and strong clinical skills.
Schedule Options
Full-Time – 36 hrs/week
Part-Time – 24 hrs/week
Shift Options
Days: 7:00 AM – 7:30 PM,
Nights: 7:00 PM – 7:30 AM
Up to $5,000 Sign-On Bonus for New Graduate RNs
Up to $10,000 for Experienced Nurses (1+ year)
8–16 Week RN Residency Program with Hands-On Training
Location: Mercy Hospital South – St. Louis, MO (Onsite)
Position Details:
New Grad RN Residency | Mercy Hospital South
RN Residency Program
Our 8–16 week RN Residency Program helps new graduates transition from student to confident nurse through:
Hands-on clinical training
One-on-one preceptor mentoring
Classroom learning and skill development
Support from nurse educators and leadership
Medical-Surgical Nursing at Mercy South
Medical-Surgical nursing at Mercy South provides a strong clinical foundation, offering exposure to multiple specialties and diverse patient populations. Nurses build skills in assessment, prioritization, and critical thinking while caring for a wide range of medical and surgical conditions.
Medical-Surgical Specialty Units
• Inpatient Medical-Surgical
– Care for adult patients with acute medical conditions such as pneumonia, cellulitis, diverticulitis, respiratory infections, and small bowel obstructions.
• Neurology – 8E
– Care for patients experiencing strokes, seizures, brain tumors, and intracranial bleeds, collaborating closely with neurology specialists.
• Orthopedics
– Support patients recovering from joint replacements, spine surgeries, and foot/ankle procedures.
• General Surgery – 3W
– Care for pre‑ and post‑operative surgical patients including appendectomies, colon resections, hernia repairs, and bariatric procedures.
• Medical Telemetry – 7E & 7W
– Monitor patients with cardiac concerns, chest pain, COPD exacerbations, infections, and gastrointestinal conditions.
• Oncology – 8W
– Provide compassionate care for oncology patients receiving chemotherapy, cancer treatments, and supportive symptom management.
Critical Care Nursing at Mercy South
Mercy South’s critical care units support higher‑acuity patients who require advanced monitoring, complex interventions, and increased clinical oversight. These units offer excellent growth opportunities for nurses looking to build advanced critical‑care competencies.
Critical Care Specialty Units
• Neuro Step‑Down
– Transitional care for patients recovering from neurological and neurosurgical conditions.
• Medical-Surgical ICU
– High‑acuity care for complex medical and surgical patients requiring continuous intensive monitoring.
• CMICU / CVICU
– Care for cardiac and cardiothoracic surgical patients, including post‑operative recovery and advanced cardiac support.
• Cardiac Med Intermediate
– Care for patients needing enhanced cardiac monitoring and management.
• Medical Step‑Down
– Intermediate‑level care bridging Med-Surg and ICU for patients with elevated acuity needs.
• Surgical Step‑Down
– Post‑operative care requiring specialized monitoring and frequent assessments.
• Cardiac Telemetry
– Continuous rhythm monitoring for patients with cardiac symptoms, chest pain, or post‑procedural needs.
Qualifications
Education
Graduate of an accredited nursing program with one of the following:
• Associate Degree in Nursing (ADN)
• Nursing Diploma
• Bachelor of Science in Nursing (BSN)
Licensure
• Active Registered Nurse (RN) license in Missouri or compact state licensure
Certification
• Basic Life Support (BLS) through the American Heart Association within 30 days of hire
Experience
• New graduates encouraged to apply
• Previous hospital experience preferred for some units
Preferred Qualifications
• Bachelor of Science in Nursing (BSN)
• Specialty certifications
• Prior acute care or specialty unit experience
Physical Requirements
• Ability to lift up to 50 lbs
• Frequent standing and walking throughout shifts
• Ability to bend, reach, kneel, squat, and assist patients safely
Why Mercy?
From day one, Mercy offers outstanding benefits - including medical, dental, and vision coverage, paid time off, tuition support, and matched retirement plans for team members working 32+ hours per pay period.
Join a caring, collaborative team where your voice matters. At Mercy, you'll help shape the future of healthcare through innovation, technology, and compassion. As we grow, you'll grow with us.
keyword(s): Registered Nurse
RN
Acute Care
Acute Care RN
Staff Nurse
Inpatient RN
Medical Surgical
Med Surg
Nurse Hiring
Sign-on Bonus
Loan Assistance
Tuition Reimbursement
Nursing Career
New Grad RN
Experienced RN
Sign on bonus
Missouri
LocationAtlanta, Georgia
Full/Part TimeFull-Time
Regular/TemporaryRegular
Add to Favorite JobsEmail this Job
About Us
Overview
Georgia Tech prides itself on its technological resources, collaborations, high-quality student body, and its commitment to building an outstanding and diverse community of learning, discovery, and creation. We strongly encourage applicants whose values align with our institutional values, as outlined in our Strategic Plan. These values include academic excellence, diversity of thought and experience, inquiry and innovation, collaboration and community, and ethical behavior and stewardship. Georgia Tech has policies to promote a healthy work-life balance and is aware that attracting faculty may require meeting the needs of two careers.
About Georgia Tech
Georgia Tech is a top-ranked public research university situated in the heart of Atlanta, a diverse and vibrant city with numerous economic and cultural strengths. The Institute serves more than 45,000 students through top-ranked undergraduate, graduate, and executive programs in engineering, computing, science, business, design, and liberal arts. Georgia Tech's faculty attracted more than $1.4 billion in research awards this past year in fields ranging from biomedical technology to artificial intelligence, energy, sustainability, semiconductors, neuroscience, and national security. Georgia Tech ranks among the nation's top 20 universities for research and development spending and No. 1 among institutions without a medical school.
Georgia Tech's Mission and Values
Georgia Tech's mission is to develop leaders who advance technology and improve the human condition. The Institute has nine key values that are foundational to everything we do:
1. Students are our top priority.
2. We strive for excellence.
3. We thrive on diversity.
4. We celebrate collaboration.
5. We champion innovation.
6. We safeguard freedom of inquiry and expression.
7. We nurture the wellbeing of our community.
8. We act ethically.
9. We are responsible stewards.
Over the next decade, Georgia Tech will become an example of inclusive innovation, a leading technological research university of unmatched scale, relentlessly committed to serving the public good; breaking new ground in addressing the biggest local, national, and global challenges and opportunities of our time; making technology broadly accessible; and developing exceptional, principled leaders from all backgrounds ready to produce novel ideas and create solutions with real human impact.
Job Summary
Perform basic installation and maintenance of components used in campus heating, ventilation and air conditioning (HVAC) systems and related equipment including chilled water, refrigeration, air compressor, gas heater, air drier, fume hoods, and pumps. Assignments typically require HVAC journeyman level skills. This position will interact with on a consistent basis with: maintenance supervision and staff, building managers and vendors. This position typically will advise and counsel: maintenance workers. This position will supervise: NA
Responsibilities
Job Duty 1 -
Install, repair, replace, operate, maintain, calibrate, test, and troubleshoot mechanical, electrical, and plumbing component used in HVAC.
Job Duty 2 -
Perform preventive maintenance on HVAC equipment.
Job Duty 3 -
Troubleshoot pneumatic, electrical, and digital controls.
Job Duty 4 -
May require purchase and accounting for HVAC related parts and materials.
Job Duty 5 -
May require working with specialized computer applications.
Job Duty 6 -
Perform other duties as assigned
Required Qualifications
Educational Requirements
High school diploma, GED Certificate or Vocational School Diploma
Required Experience
Two years of job related experience
Preferred Qualifications
Additional Preferred Qualifications
State of Georgia Unrestricted HVAC License
Preferred Educational Qualifications
Technical Diploma, Associate's Degree or two years college course work
Knowledge, Skills, & Abilities
SKILLS
This job requires journeyman level knowledge and skills for installing and maintaining compressors, fans, bearings, belts, dampers, motors, starters, controls, 208, 200, and 460 service, 24 volt-DC service, coils and piping. Position requires the ability to read prints, drawings, and schematics via paper copies and computerized software systems. In addition, the job requires ability to operate machine tools, motor vehicles (may include forklift), hand/power tools, and hydraulic/pneumatic equipment. The position requires the ability to troubleshoot and to sequence tasks for specific assignments.
USG Core Values
The University System of Georgia is comprised of our 25 institutions of higher education and learning as well as the System Office. Our USG Statement of Core Values are Integrity, Excellence, Accountability, and Respect. These values serve as the foundation for all that we do as an organization, and each USG community member is responsible for demonstrating and upholding these standards. More details on the USG Statement of Core Values and Code of Conduct are available in USG Board Policy 8.2.18.1.2 and can be found on-line at policymanual/section8/C224/#p8.2.18_personnel_conduct.
Additionally, USG supports Freedom of Expression as stated in Board Policy 6.5 Freedom of Expression and Academic Freedom found on-line at policymanual/section6/C2653.
Equal Employment Opportunity
The Georgia Institute of Technology (Georgia Tech) is an Equal Employment Opportunity Employer. The Institute is committed to maintaining a fair and respectful environment for all. To that end, and in accordance with federal and state law, Board of Regents policy, and Institute policy, Georgia Tech provides equal opportunity to all faculty, staff, students, and all other members of the Georgia Tech community, including applicants for admission and/or employment, contractors, volunteers, and participants in institutional programs, activities, or services. Georgia Tech complies with all applicable laws and regulations governing equal opportunity in the workplace and in educational activities.
Equal opportunity and decisions based on merit are fundamental values of the University System of Georgia ("USG") and Georgia Tech. Georgia Tech prohibits discrimination, including discriminatory harassment, on the basis of an individual's race, ethnicity, ancestry, color, religion, sex (including pregnancy), national origin, age, disability, genetics, or veteran status in its programs, activities, employment, and admissions. Further, Georgia Tech prohibits citizenship status, immigration status, and national origin discrimination in hiring, firing, and recruitment, except where such restrictions are required in order to comply with law, regulation, executive order, or Attorney General directive, or where they are required by Federal, State, or local government contract.
Other Information
This is not a supervisory position.
This position does not have any financial responsibilities.
This position will be required to drive.
This role is not considered a position of trust.
This position does not require a purchasing card (P-Card).
This position will not travel
This position does not require security clearance.
Job Grade: C7
Pay Range $21.20/hr -$28.83/hr
Salary will commensurate with experience and education
Location: Atlanta, GA
Shift Monday - Friday 7:55am to 4:25pm
Background Check
Successful candidate must be able to pass a background check. Please visit employment/pre-employment-screening
We're building safety-enhancing technology for aviation that will save lives. Automated aviation systems will enable a future where air transportation is safer, more convenient and fundamentally transformative to the way goods - and eventually people - move around the planet. We are a team of mission-driven engineers with experience across aerospace, robotics and self-driving cars working to make this future a reality.
As a Radar Hardware Design Engineer, you will be a part of our Radar Engineering team. The Radar Engineering team is comprised of a small cross-functional team of motivated and experienced engineers; we're responsible for designing, building, and testing cutting-edge phased array radar systems from concept to certified product. We enjoy a culture of sharing information and collaboration. Phased array radar systems have historically been reserved for specialized applications, but we're making this technology affordable to enable Detect and Avoid for widespread commercial applications. This role will focus on new advanced operational modes. The passion for revolutionary technology to make aviation safer motivates us to come in every day.
Responsibilities
In your role as a Radar Design Engineer, you will be responsible for designing digital and analog circuits for our next-generation Radar system. You will be involved in all phases of development, from conception to production, tracing system-level requirements through to circuit-level design. You will drive the design and layout of a multi-processor with an FPGA on chip using DDR 4 memory, as well as designing switching and linear power supplies. The high-speed digital design is complemented by high-frequency analog and RF design up to 12GHz. You will own the schematic, layout, artwork generation and bring-up of hardware. You will be collaborating with the cross-functional teams, including mechanical and system engineering. You will be responsible for the certification of your design to DO-160, DO-254 design assurance and FCC certification. You will support radar system integration and testing in the engineering lab and on the aircraft.
Basic Success Criteria
Electrical Engineering fundamentals, typically gained through a Bachelor's Degree of Science or Engineering in Mechanical, Electrical, Aerospace, or a related discipline
5+ years of professional hands-on experience with high-speed digital circuits, linear and switching power regulator circuits, PLL's, VGA, mixers etc.
Ability to use Circuit simulators, Altium schematic capture and layout, and SPICE simulation software
Ability to troubleshoot, find root cause, and resolve issues
Experienced in using oscilloscopes, logic analyzers, spectrum analyzers and Vector Network Analyzers
Preferred Criteria
Advanced Degree of Science or Electrical Engineering
Experience developing system architectures and managing requirements for certification of Avionics
Creative problem solver that can bring multiple disciplines together, with the ability to assess risk and make design and development decisions without all available data
Experience integrating and troubleshooting various electronic sensors and components
RF circuit design experience up to 12GHz
DO-160 and DO-254 hardware design assurance experience
This position will be located at our facility in Mountain View, California.
Must be willing to travel 10% of the time.
The estimated salary range for this position is $190,000 to $250,000/annual salary + cash and stock option awards + benefits. At Reliable Robotics, we strive to provide competitive and rewarding compensation based on experience and expertise, as well as market conditions, location, and pay equity.
In addition to base compensation, Reliable Robotics offers stock options, employee medical, 401k contribution, great co-workers and a casual work environment.
This position requires access to information that is subject to U.S. export controls. An offer of employment will be contingent upon the applicant's capacity to perform in compliance with U.S. export control laws.
All applicants are asked to provide documentation that legally establishes status as a U.S. person or non-U.S. person (and nationalities in the case of a non-U.S. person). Where the applicant is not a U.S. person, meaning not a (i) U.S. citizen or national, (ii) U.S. lawful permanent resident, (iii) refugee under 8 U.S.C. * 1157, or (iv) asylee under 8 U.S.C. * 1158, or not otherwise permitted to access the export-controlled technology without U.S. government authorization, the Company reserves the right not to apply for an export license for such applicants whose access to export-controlled technology or software source code requires authorization and may decline to proceed with the application process and any offer of employment on that basis.
At Reliable Robotics, our goal is to be a diverse and inclusive workforce. As an Equal Opportunity Employer, we do not discriminate on the basis of race, religion, color, creed, ancestry, sex, gender (including pregnancy, childbirth, breastfeeding, or related medical conditions), gender identity, gender expression, sexual orientation, age, non-disqualifying physical or mental disability or medical conditions, national origin, military or veteran status, genetic information, marital status, or any other basis covered by applicable law. All employment and promotion is decided on the basis of qualifications, merit, and business need.
If you require reasonable accommodation in completing an application, interviewing, completing any pre-employment testing, or otherwise participating in the employee selection process, please direct your inquiries to
Compensation Range: $190K - $250K
Apply for this JobThinkBIG Internship - Starting August 2026
Req No.
2025-5369
Category
ThinkBIG Internship
Location
US-IL-East Peoria
Type
Intern
Union or Non-Union
Non-Union
Division
Heavy
Company
Altorfer Inc
Working Hours/Days
6:30 am - 3:00 pm Monday - Friday
Overview
Think Big Program
(Caterpillar Dealer Service Technology Program)
If you or anyone you know is considering careers please advise them of this fantastic opportunity in a high-demand field. Students can receive their Associate in Applied Sciences while going through our paid internship! Additionally, we also have a tuition reimbursement Program for students!
Basic Duties
The Caterpillar Dealer Service Technology Program is a great opportunity for anyone interested in going to school to learn a skilled trade in a high-demand industry. Students will go through a two-year curriculum where they will rotationally attend Illinois Central College, located in East Peoria, for 8 weeks and then attend an Altorfer branch to complete an 8 week internship. This rotation continues throughout the duration of the program. A few of the courses they will take are Fundamentals of Hydraulics, Caterpillar Engine Fuel Systems, Fundamentals of Electrical Systems, Diagnostic Testing, and Undercarriage/Final Drives.
Qualifications
Please visit the link below to apply and for more information.
academics/catalog/agricultural-and-industrial-technologies/caterpillar-dealer-service-technology/
Compensation & What We Can Offer You:
- Payrate: $18.50 per hour
- Tuition Reimbursement
- Tool Insurance and Safety Equipment Reimbursement
- 401(k)
- Paid Time Off (PTO) earn up to 40 hours of PTO per calendar year
Posted Min
USD $18.50/Hr.
Posted Max
USD $18.50/Hr.
Physical Requirements/Working Conditions
This position works in a warehouse/shop environment. May on a continuous basis walk, climb on and off equipment, bend and lift up to 75-100lbs. May be required to wear appropriate safety equipment (IE- Safety glasses or side shields) when needed. The noise level in the work environment is usually moderate to high. May intermittently sit at a desk for a period of time to answer telephone and write or use a keyboard to communicate through email. Must be flexible to work varying schedules and hours as needed. The physical demands described above are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.
Why Work for Altorfer?
At Altorfer, our iron is just the beginning. Our people make our company successful, and we would not be who we are without them. As a third generation, family-owned company created in 1957, we bring our values into how we do business. Everyone from technicians, sales representatives, administrative professionals, or somewhere in between is part of the "A-Team" and is critical to our success. Here at Altorfer, we have over 35 locations and 1300 employees with long tenure for you to learn from. We have a collaborative, family valued culture, with a great reputation in the industry. A company that offers competitive pay, excellent benefits, and a remarkable team of people to work with.
Need help finding the right job?
We can recommend jobs specifically for you!
Click here to get started.
LocationAtlanta, Georgia
Full/Part TimeFull-Time
Regular/TemporaryRegular
Add to Favorite JobsEmail this Job
About Us
Overview
Georgia Tech prides itself on its technological resources, collaborations, high-quality student body, and its commitment to building an outstanding and diverse community of learning, discovery, and creation. We strongly encourage applicants whose values align with our institutional values, as outlined in our Strategic Plan. These values include academic excellence, diversity of thought and experience, inquiry and innovation, collaboration and community, and ethical behavior and stewardship. Georgia Tech has policies to promote a healthy work-life balance and is aware that attracting faculty may require meeting the needs of two careers.
About Georgia Tech
Georgia Tech is a top-ranked public research university situated in the heart of Atlanta, a diverse and vibrant city with numerous economic and cultural strengths. The Institute serves more than 45,000 students through top-ranked undergraduate, graduate, and executive programs in engineering, computing, science, business, design, and liberal arts. Georgia Tech's faculty attracted more than $1.4 billion in research awards this past year in fields ranging from biomedical technology to artificial intelligence, energy, sustainability, semiconductors, neuroscience, and national security. Georgia Tech ranks among the nation's top 20 universities for research and development spending and No. 1 among institutions without a medical school.
Georgia Tech's Mission and Values
Georgia Tech's mission is to develop leaders who advance technology and improve the human condition. The Institute has nine key values that are foundational to everything we do:
1. Students are our top priority.
2. We strive for excellence.
3. We thrive on diversity.
4. We celebrate collaboration.
5. We champion innovation.
6. We safeguard freedom of inquiry and expression.
7. We nurture the wellbeing of our community.
8. We act ethically.
9. We are responsible stewards.
Over the next decade, Georgia Tech will become an example of inclusive innovation, a leading technological research university of unmatched scale, relentlessly committed to serving the public good; breaking new ground in addressing the biggest local, national, and global challenges and opportunities of our time; making technology broadly accessible; and developing exceptional, principled leaders from all backgrounds ready to produce novel ideas and create solutions with real human impact.
Job Summary
Perform advanced custodial services and facilitate and/or oversee routine and detailed housekeeping operations to ensure assigned unit/facilities are maintained in a healthy, safe and sanitary manner. This position will interact on a regular basis with: staff. This position typically will advise and counsel: staff. This position will supervise.
Responsibilities
Job Duty 1 -
Assign and inspect custodial/housekeeping work and related projects/activities to maintain unit/facility cleanliness levels and appearance
Job Duty 2 -
Perform specialized cleaning operations necessary to ensure unit/facilities are maintained in a healthy, safe and sanitary manner
Job Duty 3 -
Maintain supply inventory necessary to successfully perform routine and detailed custodial services
Job Duty 4 -
Respond to system-transmitted service requests
Job Duty 5 -
Transport custodial employees to and from work assignments, as necessary
Job Duty 6 -
Operate and/or maintain assigned power equipment related to custodial services, as required
Job Duty 7 -
Perform other duties as assigned
Required Qualifications
Educational Requirements
High school diploma, GED Certificate or Vocational School Diploma
Required Experience
Three to five years job related experience
Knowledge, Skills, & Abilities
SKILLS
Ability to follow prescribed instructions, effectively communicate, operate basic computer applications and, work independently and as a member of a team.
USG Core Values
The University System of Georgia is comprised of our 25 institutions of higher education and learning as well as the System Office. Our USG Statement of Core Values are Integrity, Excellence, Accountability, and Respect. These values serve as the foundation for all that we do as an organization, and each USG community member is responsible for demonstrating and upholding these standards. More details on the USG Statement of Core Values and Code of Conduct are available in USG Board Policy 8.2.18.1.2 and can be found on-line at policymanual/section8/C224/#p8.2.18_personnel_conduct.
Additionally, USG supports Freedom of Expression as stated in Board Policy 6.5 Freedom of Expression and Academic Freedom found on-line at policymanual/section6/C2653.
Equal Employment Opportunity
The Georgia Institute of Technology (Georgia Tech) is an Equal Employment Opportunity Employer. The Institute is committed to maintaining a fair and respectful environment for all. To that end, and in accordance with federal and state law, Board of Regents policy, and Institute policy, Georgia Tech provides equal opportunity to all faculty, staff, students, and all other members of the Georgia Tech community, including applicants for admission and/or employment, contractors, volunteers, and participants in institutional programs, activities, or services. Georgia Tech complies with all applicable laws and regulations governing equal opportunity in the workplace and in educational activities.
Equal opportunity and decisions based on merit are fundamental values of the University System of Georgia ("USG") and Georgia Tech. Georgia Tech prohibits discrimination, including discriminatory harassment, on the basis of an individual's race, ethnicity, ancestry, color, religion, sex (including pregnancy), national origin, age, disability, genetics, or veteran status in its programs, activities, employment, and admissions. Further, Georgia Tech prohibits citizenship status, immigration status, and national origin discrimination in hiring, firing, and recruitment, except where such restrictions are required in order to comply with law, regulation, executive order, or Attorney General directive, or where they are required by Federal, State, or local government contract.
Other Information
This is a supervisory position.
This position does not have any financial responsibilities.
This position will be required to drive.
This role is considered a position of trust.
This position does not require a purchasing card (P-Card).
This position will not travel
This position does not require security clearance.
Job Grade: C3B
Pay Range: $17.64/hr - $21.96/hr
Location: Atlanta, GA
(Monday - Friday 5:55am - 2:25pm)
Background Check
Successful candidate must be able to pass a background check. Please visit employment/pre-employment-screening
LocationAtlanta, Georgia
Full/Part TimeFull-Time
Regular/TemporaryTemporary
Add to Favorite JobsEmail this Job
About Us
Georgia Tech prides itself on its technological resources, collaborations, high-quality student body, and its commitment to building an outstanding and diverse community of learning, discovery, and creation. We strongly encourage applicants whose values align with our institutional values, as outlined in our Strategic Plan. These values include academic excellence, diversity of thought and experience, inquiry and innovation, collaboration and community, and ethical behavior and stewardship. Georgia Tech has policies to promote a healthy work-life balance and is aware that attracting faculty may require meeting the needs of two careers.
About Georgia Tech
Georgia Tech is a top-ranked public research university situated in the heart of Atlanta, a diverse and vibrant city with numerous economic and cultural strengths. The Institute serves more than 45,000 students through top-ranked undergraduate, graduate, and executive programs in engineering, computing, science, business, design, and liberal arts. Georgia Tech's faculty attracted more than $1.4 billion in research awards this past year in fields ranging from biomedical technology to artificial intelligence, energy, sustainability, semiconductors, neuroscience, and national security. Georgia Tech ranks among the nation's top 20 universities for research and development spending and No. 1 among institutions without a medical school.
Georgia Tech's Mission and Values
Georgia Tech's mission is to develop leaders who advance technology and improve the human condition. The Institute has nine key values that are foundational to everything we do:
1. Students are our top priority.
2. We strive for excellence.
3. We thrive on diversity.
4. We celebrate collaboration.
5. We champion innovation.
6. We safeguard freedom of inquiry and expression.
7. We nurture the wellbeing of our community.
8. We act ethically.
9. We are responsible stewards.
Over the next decade, Georgia Tech will become an example of inclusive innovation, a leading technological research university of unmatched scale, relentlessly committed to serving the public good; breaking new ground in addressing the biggest local, national, and global challenges and opportunities of our time; making technology broadly accessible; and developing exceptional, principled leaders from all backgrounds ready to produce novel ideas and create solutions with real human impact.
Department Information
The College of Computing was established in 1990 as the first such College at a public university and the second in the United States. Since that time, the college has grown into a world-class leader in research and education. The graduate CS program is currently ranked 6th and the undergraduate 5th nationally by U.S. News and World Report. The College consists of five Schools that provide specialized and general computing education to the entire campus. With over 16-degree programs, including its world-renowned online MS in CS, we believe the College to be the largest Computing unit in the United States and, as such, one of the largest producers of computationalist at all levels and of all demographic backgrounds. The College is a part of the Georgia Institute of Technology, a unit of the University System of Georgia and is primarily located in the heart of Atlanta, Georgia.
Job Summary
Provide professional services in support of unit management in field as specified in the particular job posting. Focus will be in a professional field such as Communications, Marketing, Customer Service, Academic Administration, Event Management, Procurement, etc. Specific duties will be determined based on assignment and unit needs. This position will interact on a consistent basis with: unit management and staffThis position typically will advise and counsel: unit management and staffThis position will supervise: NA
Responsibilities
Job Duty 1 -
Perform duties related to professional field assignment.
Job Duty 2 -
Participate in reviews for compliance with policy and governmental regulations in the field.
Job Duty 3 -
Provide input to department policies and procedures.
Job Duty 4 -
May provide input to and administer project timelines and budgets.
Job Duty 5 -
May interact with vendors regarding procurement and delivery issues.
Job Duty 6 -
Perform other duties as assigned
Responsibilities
Additional Responsibilities:
- Help students navigate public transport in Berlin.
- Serve as a first point of contact at the student residence to deal with any emergencies in concert with the program director or other on-site faculty; be available to discuss with students any pressing personal issues they may have; keep the program director informed of student issues.
- Liaise with staff at the student residence, students, and program director to address any concerns about student conduct, housing rules and student use of facilities/amenities with an aim to maintain positive relations and experience.
- Work with the program director to organize program co- and extra-curricular activities at host institution, the student residence, and in the city.
- Serve as the Teaching Assistant for two courses (CS 2340, CS 4400); serve as a backup instructor in the event of illness of the course instructor
- Go with students to physician appointments or hospital/clinic visits as needed.
- Organize and attend program social events.
Required Qualifications
Educational Requirements
Bachelor's Degree in related field or equivalent combination of education and experience
Other Required Qualifications
Position requires the ability to pass a drug/alcohol pre-screening; may require working competently with dangerous materials and in a dangerous environment, such as around or on rotating machinery, live electrical circuits, hazardous materials, high-pressure liquids and gas, and bot surfaces. In addition, it may require lifting heavy objects of up to 75 pounds, and working in confined spaces, noisy environments, and elevated locations (such as climbing extension ladder and other types of ladders; or using scaffolding) either inside or outside of a building. During adverse weather, activities may require extensive after hours work or callback. This job may require wearing a full-face respirator in accordance with Georgia Tech campus policies and procedures. This job will require some evening hours and hours during peak times, as well as being a part of an on-duty rotation.
Required Experience
Up to two years of job related experience
Preferred Qualifications
- Prior experience with travel and study abroad (as a former participant in a summer or semester program or exchange) and familiarity with Berlin and/or Germany (preferred).
- Academic background and/or domain knowledge to support CS 2340, CS 4400.
- Experience as teaching assistant, resident assistant, or leader in student organizations.
- Excellent interpersonal communication skills, and ability to work well in a team.
- Demonstrated reliability and integrity, and a strong sense of initiative.
- Sensitivity to confidentiality.
- Strong leadership skills and experience with conflict resolution.
Knowledge, Skills, & Abilities
SKILLS
This job requires application of professional principles, processes and practices; application of regulations; utilization of basic and advanced computer applications including those specific to areas of responsibility; communication skills.
USG Core Values
The University System of Georgia is comprised of our 26 institutions of higher education and learning as well as the System Office. Our USG Statement of Core Values are Integrity, Excellence, Accountability, and Respect. These values serve as the foundation for all that we do as an organization, and each USG community member is responsible for demonstrating and upholding these standards. More details on the USG Statement of Core Values and Code of Conduct are available in USG Board Policy 8.2.18.1.2 and can be found on-line at policymanual/section8/C224/#p8.2.18_personnel_conduct.
Additionally, USG supports Freedom of Expression as stated in Board Policy 6.5 Freedom of Expression and Academic Freedom found on-line at policymanual/section6/C2653.
Equal Employment Opportunity
The Georgia Institute of Technology (Georgia Tech) is an Equal Employment Opportunity Employer. The University is committed to maintaining a fair and respectful environment for all. To that end, and in accordance with federal and state law, Board of Regents policy, and University policy, Georgia Tech provides equal opportunity to all faculty, staff, students, and all other members of the Georgia Tech community, including applicants for admission and/or employment, contractors, volunteers, and participants in institutional programs, activities, or services. Georgia Tech complies with all applicable laws and regulations governing equal opportunity in the workplace and in educational activities.
Georgia Tech prohibits discrimination, including discriminatory harassment, on the basis of race, ethnicity, ancestry, color, religion, sex (including pregnancy), sexual orientation, gender identity, gender expression, national origin, age, disability, genetics, or veteran status in its programs, activities, employment, and admissions. This prohibition applies to faculty, staff, students, and all other members of the Georgia Tech community, including affiliates, invitees, and guests. Further, Georgia Tech prohibits citizenship status, immigration status, and national origin discrimination in hiring, firing, and recruitment, except where such restrictions are required in order to comply with law, regulation, executive order, or Attorney General directive, or where they are required by Federal, State, or local government contract.
Background Check
Successful candidate must be able to pass a background check. Please visit employment/pre-employment-screening
Other Information
This is not a supervisory position.
This position does not have any financial responsibilities.
This position will not be required to drive.
This role is not considered a position of trust.
This position does not require a purchasing card (P-Card).
This position will not travel
This position does not require security clearance.
Other Information
Pay Information:
FLSA status: Non-Exempt
Hourly Pay Range: $0 - $26.10
Schedule:
25 hours per week; Remotely/Abroad: Berlin, Germany and Barcelona, Spain
With history dating back to 1856, American National Bank is one of the largest privately owned banks in Nebraska with branch locations in the region with locations in Nebraska, Iowa and Minnesota. We believe in doing. By joining forces with local businesses, charitable organizations and our team members, we are proud to be part of the momentum that keeps the community around us building and growing. Together we can be the catalyst for making great things happen. Join our company to be a part of this inspirational movement and learn how we can grow your career.
Together, we can do more for your future...
At American National Bank, we provide our team members with comprehensive benefits to do more for you and your family.
We offer:
- Competitive base compensation with additional performance-based annual earning potential
- Career growth potential built into every role
- 401(k) Investment Plan with up to 4% match by ANB with immediate vesting and profit sharing*
- No cost Life Insurance with benefit 2x base salary (subject to cap), with ability to purchase additional coverage
- Paid Time Off, Paid Holidays and Paid Volunteer Time
- Medical Insurance with signification premium contribution by ANB, with Wellness Plan Support*
- Dental Insurance with significant premium contribution by ANB*
- Additional Insurance options to meet personal needs: Vision, Pet Care, Critical Illness, Accident, Income, and Identity Theft Protection*
- Tuition Reimbursement*
- Gym Membership Reimbursement*
- Discounts on Banking and Financial needs
*Eligibility Criteria Apply
The Lead Teller maintains an accurate record of all cash exchanges and balancing of the vault to include ordering and tracking required levels of cash and orders of cash from the Federal Reserve Bank. They are responsible for timely completion of branch certification, serves as role model for new staff, right-hand for branch manager, and provides direction on the teller line and approval or over-ride authority for transaction and cash disbursement.
Schedule: Full-time Monday-Friday 8:00am to 5:00pm and rotating Saturdays from 8:45am-12:15pm.
Essential Job Duties & Responsibilities
- Consistently provides high quality client service while effectively processing transactions and supporting sales.
- Maintains accurate records of all cash exchanges and balancing of the vault to include ordering and tracking required levels of cash.
- Responsible for timely completion of branch certification.
- Provides direction to the teller line and approval or over-ride authority for transaction and cash disbursement.
- Records all transactions, prepares daily settlements of teller cash, and proofs transactions according to branch procedures.
- Processes transactions for various bank products and services including the following: deposits, withdrawals, loan payments, cashier checks, money orders, and credit card cash advances.
- Performs clerical duties such as answering calls, processing incoming mail and deliveries, filing, and typing.
Experience and Education
- A minimum of one year of demonstrated cash handling experience, preferably in a Teller role.
- Basic knowledge of branch operations; related experience may be considered.
- Previous lead or supervisor experience, preferred.
- Previous sales experience, preferred.
- In pursuit of a high school diploma or its equivalent is required.
The expected starting range for this role is $19.00-$23.00 per hour. Compensation decisions will be based on factors such as experience, qualifications, and education, which may determine where within the range the starting pay will fall.
Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities
This employer is required to notify all applicants of their rights pursuant to federal employment laws.
For further information, please review the Know Your Rights notice from the Department of Labor.
We're building safety-enhancing technology for aviation that will save lives. Automated aviation systems will enable a future where air transportation is safer, more convenient and fundamentally transformative to the way goods - and eventually people - move around the planet. We are a team of mission-driven engineers with experience across aerospace, robotics and self-driving cars working to make this future a reality.
As an Embedded Software Engineer at Reliable Robotics, you will be a part of the Embedded Systems team developing the low-level software and firmware at the heart of the Reliable Robotics autonomy stack. We provide dependable computing, networking, signal acquisition, and motor control solutions that bring our aircraft to life. Your contributions will directly enable key equipment and aircraft product demonstrations, unlock the development of higher-level capabilities, and set the stage for product certification & delivery to market.
Responsibilities
Develop C/C++ flight software requirements, design, code, unit tests, and requirements-based test cases in accordance with DO-178C software development procedures
Develop and maintain Continuous Integration infrastructure for automating software integration, build, testing, and deployment
Develop Python-based software integration test cases
Focus areas include bare-metal operating system and hardware initialization, networking, protocol drivers, and memory interfaces
Basic Success Criteria
Bachelor's degree in Computer Science, Computer Engineering, or equivalent experience
3+ years of professional experience developing C or C++
Professional experience developing software for embedded, high-performance, or safety-critical applications
Preferred Criteria
Thorough understanding of computer architecture, operating systems, and networking
Experience working in a DO-178 software development environment
Excellent written and verbal communication skills
Comfortable with a fast-paced, agile/iterative development life cycle
Embedded software engineers at Reliable Robotics have a unique opportunity to develop an end-to-end product from bare metal up to the aircraft level, with a direct impact on aircraft capabilities. We are a fast-paced team that gets results, and with your experience, motivation, skills, and enthusiasm, you'll help the team accomplish amazing things.
Must be willing to travel up to 10% of the time.
The estimated salary range for this position is $155,000 to $215,000/annual salary + cash and stock option awards + benefits. At Reliable Robotics, we strive to provide competitive and rewarding compensation based on experience and expertise, as well as market conditions, location, and pay equity.
Reliable Robotics offers stock options, employee medical, 401k contribution, great co-workers, and a casual work environment.
This position requires access to information that is subject to U.S. export controls. An offer of employment will be contingent upon the applicant's capacity to perform in compliance with U.S. export control laws.
All applicants are asked to provide documentation that legally establishes status as a U.S. person or non-U.S. person (and nationalities in the case of a non-U.S. person). Where the applicant is not a U.S. person, meaning not a (i) U.S. citizen or national, (ii) U.S. lawful permanent resident, (iii) refugee under 8 U.S.C. * 1157, or (iv) asylee under 8 U.S.C. * 1158, or not otherwise permitted to access the export-controlled technology without U.S. government authorization, the Company reserves the right not to apply for an export license for such applicants whose access to export-controlled technology or software source code requires authorization and may decline to proceed with the application process and any offer of employment on that basis.
At Reliable Robotics, our goal is to be a diverse and inclusive workforce. As an Equal Opportunity Employer, we do not discriminate on the basis of race, religion, color, creed, ancestry, sex, gender (including pregnancy, childbirth, breastfeeding, or related medical conditions), gender identity, gender expression, sexual orientation, age, non-disqualifying physical or mental disability or medical conditions, national origin, military or veteran status, genetic information, marital status, or any other basis covered by applicable law. All employment and promotion is decided on the basis of qualifications, merit, and business need.
If you require reasonable accommodation in completing an application, interviewing, completing any pre-employment testing, or otherwise participating in the employee selection process, please direct your inquiries to
Compensation Range: $155K - $215K
Apply for this Job