Pay Level 8 Basic Pay Jobs Remote Jobs in Usa

Think Big Program

(Caterpillar Dealer Service Technology Program)

If you or anyone you know is considering careers please advise them of this fantastic opportunity in a high-demand field. Students can receive their Associate in Applied Sciences while going through our paid internship! Additionally, we also have a tuition reimbursement Program for students!

The Caterpillar Dealer Service Technology Program is a great opportunity for anyone interested in going to school to learn a skilled trade in a high-demand industry. Students will go through a two-year curriculum where they will rotationally attend Illinois Central College, located in East Peoria, for 8 weeks and then attend an Altorfer branch to complete an 8 week internship. This rotation continues throughout the duration of the program. A few of the courses they will take are Fundamentals of Hydraulics, Caterpillar Engine Fuel Systems, Fundamentals of Electrical Systems, Diagnostic Testing, and Undercarriage/Final Drives.

Please visit the link below to apply and for more information.

academics/catalog/agricultural-and-industrial-technologies/caterpillar-dealer-service-technology/

Compensation & What We Can Offer You:

• Payrate: $18.50 per hour
• Tuition Reimbursement
• Tool Insurance and Safety Equipment Reimbursement
• 401(k)
• Paid Time Off (PTO) earn up to 40 hours of PTO per calendar year

This position works in a warehouse/shop environment. May on a continuous basis walk, climb on and off equipment, bend and lift up to 75-100lbs. May be required to wear appropriate safety equipment (IE- Safety glasses or side shields) when needed. The noise level in the work environment is usually moderate to high. May intermittently sit at a desk for a period of time to answer telephone and write or use a keyboard to communicate through email. Must be flexible to work varying schedules and hours as needed. The physical demands described above are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

Why Work for Altorfer?

At Altorfer, our iron is just the beginning. Our people make our company successful, and we would not be who we are without them. As a third generation, family-owned company created in 1957, we bring our values into how we do business. Everyone from technicians, sales representatives, administrative professionals, or somewhere in between is part of the "A-Team" and is critical to our success. Here at Altorfer, we have over 35 locations and 1300 employees with long tenure for you to learn from. We have a collaborative, family valued culture, with a great reputation in the industry. A company that offers competitive pay, excellent benefits, and a remarkable team of people to work with.

We're building safety-enhancing technology for aviation that will save lives. Automated aviation systems will enable a future where air transportation is safer, more convenient and fundamentally transformative to the way goods - and eventually people - move around the planet. We are a team of mission-driven engineers with experience across aerospace, robotics and self-driving cars working to make this future a reality.

As a System Integration Engineer at Reliable Robotics, you will work on a team with mechanical, electrical, and software engineers, reporting to the system integration engineering manager. This is a small team of highly motivated people designing, testing, and flying advanced automated systems. We enjoy combining mechanical and electrical hardware and getting it onto an aircraft safely and quickly.

Responsibilities

In your role as a system integration engineer, you will get to own vehicle level projects through the planning, design, and testing phases of development. You will own a large breadth of projects from primary flight control hardware, data acquisition hardware, hardware in the loop testing, ground station development, and integration with the software and human machine interface teams. You will be responsible for guiding the schedule and sequencing of large integration projects with significant ownership of which aircraft functions are the highest priority to be integrated and tested on vehicle.

Basic Success Criteria

• Bachelor's degree in science or engineering or equivalent industry experience

• 8+ Years of industry experience designing, integrating, and testing electromechanical systems

• Solid understanding of engineering fundamentals

• Experience using system design fundamentals

• Experience reading electrical wiring schematics

• Experience testing systems for proper performance

• Experience writing and running code

• Excellent project management skills

Preferred Criteria

• Experience designing a system architecture and weighing design options to accomplish specific system requirements

• Experience performing vehicle safety assessments, risk assessments, and contingency management

• Ability to design, build, and operate test stands and equipment

• Excellent measurement, technical writing, and data analysis skills

• Eagerness to both teach and learn

• Ability to work both independently and as a leader of a high performing team

The position will be located at our facility in Mountain View, California.

Must be willing to travel up to 10% of the time.

The estimated salary range for this position is $162,000 to $220,000/annual salary + cash and stock option awards + benefits. At Reliable Robotics we strive to provide competitive and rewarding compensation based on experience and expertise, as well as market conditions, location, and pay equity.

In addition to base compensation, Reliable Robotics offers stock options, employee medical, 401k contribution, great co-workers and a casual work environment.

This position requires access to information that is subject to U.S. export controls. An offer of employment will be contingent upon the applicant's capacity to perform in compliance with U.S. export control laws.

All applicants are asked to provide documentation that legally establishes status as a U.S. person or non-U.S. person (and nationalities in the case of a non-U.S. person). Where the applicant is not a U.S. person, meaning not a (i) U.S. citizen or national, (ii) U.S. lawful permanent resident, (iii) refugee under 8 U.S.C. * 1157, or (iv) asylee under 8 U.S.C. * 1158, or not otherwise permitted to access the export-controlled technology without U.S. government authorization, the Company reserves the right not to apply for an export license for such applicants whose access to export-controlled technology or software source code requires authorization and may decline to proceed with the application process and any offer of employment on that basis.

At Reliable Robotics, our goal is to be a diverse and inclusive workforce. As an Equal Opportunity Employer, we do not discriminate on the basis of race, religion, color, creed, ancestry, sex, gender (including pregnancy, childbirth, breastfeeding, or related medical conditions), gender identity, gender expression, sexual orientation, age, non-disqualifying physical or mental disability or medical conditions, national origin, military or veteran status, genetic information, marital status, or any other basis covered by applicable law. All employment and promotion is decided on the basis of qualifications, merit, and business need.

If you require reasonable accommodation in completing an application, interviewing, completing any pre-employment testing, or otherwise participating in the employee selection process, please direct your inquiries to

Compensation Range: $162K - $220K

Open date: June 9, 2025

Most recent review date: Tuesday, Jun 24, 2025 at 11:59pm (Pacific Time)

Applications received after this date will be reviewed by the search committee if the position has not yet been filled.

Final date: Wednesday, Oct 14, 2026 at 11:59pm (Pacific Time)

Applications will continue to be accepted until this date, but those received after the review date will only be considered if the position has not yet been filled.

The Coleman Fung Institute for Engineering Leadership at the University of California, Berkeley invites applications for a pool of qualified temporary, part-time instructors to teach engineering management topics in the Master of Engineering program (Berkeley MEng) should an opening arise. Screening of applicants is ongoing and will continue as needed.

The MEng program offers coursework in technology innovation and management. We hire a number of qualified professionals and academics to hold temporary lecturer and TSP (Teacher Special Program) appointments to lend variety and subject matter expertise to our core engineering leadership topics:

* Accounting

* Coaching for High Performing Teams

* Communications

* Diversity, Equity, Inclusion & Belonging

* Entrepreneurship

* Ethics

* Finance

* Global Business

* Global Innovations

* Industry Analysis

* Innovation

* Law

* Leadership

* Marketing

* Negotiations

* Organizational Behavior

* Product Management

* Project Management

* R&D Technology Management

* Teaming & Project Management

* Technology Strategy

* Other topics in Engineering Leadership

We hire for both lecturer and TSP positions. TSPs teach short courses on one or more of the topic areas listed. Most TSP courses are taught in a 'bootcamp' 8-day format in early August and early January.

Lecturers may be appointed for a semester or for the academic year, depending on instructional assignments. Lecturers and TSPs are responsible for the course syllabus, curriculum development and delivery, holding office hours, student assessment through relevant projects, presentations, problem sets, exams, and/or class attendance and participation, and assigning grades.

Applicants are considered for positions as needs arise; the existence of this pool does not guarantee that a position is available.

Program: programs-centers/full-time-program/leadership-development/

Labor Contract:

Bachelors or equivalent international degree required by date of application.

Experience teaching college or graduate students by the start date of the job. Masters degree or equivalent international degree required by the start date of the job, or 5 or more years of industry experience.

2 or more years of management or executive level industry experience. Experience teaching graduate-level business and management topics to engineers.

• Cover Letter - Please discuss prior teaching experience, teaching approach, and future teaching interests. This can include, for example, specific efforts, accomplishments, and future plans to support the success of all students through inclusive curriculum, classroom environment, and pedagogy.

  
  

• Resume - Your most recently updated C.V.

  
  

• Sample Syllabus - Please provide an example syllabus from a previous teaching engagement.
  
  (Optional)

  
  

• Teaching Evaluations - Please provide student evaluations or feedback from one previous teaching engagement; qualitative or quantitative evaluations are accepted.
  
  (Optional)

  
  

• 2 required (contact information only)

Help contact:

UC Berkeley is committed to diversity, equity, inclusion, and belonging in our public mission of research, teaching, and service, consistent with UC Regents Policy 4400 and University of California Academic Personnel policy (APM 210 1-d). These values are embedded in our Principles of Community, which reflect our passion for critical inquiry, debate, discovery and innovation, and our deep commitment to contributing to a better world. Every member of the UC Berkeley community has a role in sustaining a safe, caring and humane environment in which these values can thrive.

The University of California, Berkeley is an Equal Opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or protected veteran status.

For more information, please refer to the University of California's Affirmative Action and Nondiscrimination in Employment Policy and the University of California's Anti-Discrimination Policy.

In searches when letters of reference are required all letters will be treated as confidential per University of California policy and California state law. Please refer potential referees, including when letters are provided via a third party (i.e., dossier service or career center), to the UC Berkeley statement of confidentiality prior to submitting their letter.

As a University employee, you will be required to comply with all applicable University policies and/or collective bargaining agreements, as may be amended from time to time. Federal, state, or local government directives may impose additional requirements.

Unless stated otherwise, unambiguously, in the position description, this position does not include sponsorship of a new consular H-1B visa petition that would require payment of the $100,000 supplemental fee.

As a condition of employment, the finalist will be required to disclose if they are subject to any final administrative or judicial decisions within the last seven years determining that they committed any misconduct.

• 
  
• "Misconduct" means any violation of the policies or laws governing conduct at the applicant's previous place of employment, including, but not limited to, violations of policies or laws prohibiting sexual harassment, sexual assault, or other forms of harassment or discrimination, as defined by the employer.
  
• UC Sexual Violence and Sexual Harassment Policy
  
• UC Anti-Discrimination Policy
  
• APM - 035: Affirmative Action and Nondiscrimination in Employment
  

Pay Range: $18.00 - $24.80

Purpose: The Warehouse Supervisor is responsible for directing and overseeing the warehouse operations of each retail store. In addition, the Warehouse Supervisor is responsible for supervising warehouse specialists, order pickers and forklift operators; will support the Receiving Supervisor in managing the daily freight schedule based on customer and inventory needs.

• Responsible for the daily scheduling of warehouse personnel to ensure proper manning in order to ship and receive products at the store in a productive and cost-efficient manner
• Direct the day-to day activities of the warehouse. Such activities include shipping, receiving, maintenance, inventory control, etc.
• Responsible for the warehouse as it pertains to Storage Buy transactions, receiving errors, and staging of products
• Responsible for maintenance of warehouse equipment, providing both preventive maintenance programs and communicating all necessary repairs to CEM and/or Operations Manager. Ensure that the warehouse personnel have safe, efficient equipment in order to perform the distribution functions
• Responsible for warehouse safety programs in order to provide a safe and clean workplace for employees and within the regulations of all OSHA local and state regulations
• Ensure all associates are trained and following all standard operating procedures
• Responsible for the progressive disciplinary process in the area of counseling, oral and written warnings; ensures a productive labor climate in the warehouse operation
• Handle general employee inquiries and solves problems
• Coordinate with other departments to facilitate efficient warehouse operations
• Complete necessary Activity Reports for management
• Monitor the flow of paperwork from Receiving to Inventory Control Specialist for timely data entry
• Resolve discrepancies with shipping, invoices, packing slips, and receiver reports
• Responsible for the execution of the Storage Buy Audit COP.
• Ensure products are staged for counting and inspection
• Ensure products are stored properly to conserve space and comply with safety procedures
• Oversee the rotation of inventories within the warehouse
• Perform other related duties as directed by management

• 1-3 years of previous supervisory experience required (preferably in a warehouse or distribution center environment)
• Excellent interpersonal, team building, delegating and follow-up skills
• Ability to work with and maintain effective working relationships with other departments in the company
• Effective communication skills (oral and written)
• Competent in performing basic mathematical calculations
• Strong computer skills, with the ability to work in Windows-based systems
• Ability to work in a fast paced environment and meet established deadlines
• Available to work extended hours, especially during peak seasons

• While performing the duties of this job, the employee is frequently exposed to a warehouse environment and moving vehicles. The noise level in the work environment is typically moderate to noisy.

Physical Work Ability exert 30 60 pounds of force occasionally, and or 20-30 pounds of force frequently, and/or greater than negligible up to 20 pounds of force constantly to lift, carry push, pull, or otherwise move objects. The employee is often required to use their hands and fingers, to handle or feel. The employee is frequently required to stand, walk, reach with arms and hands, climb or balance, and to stoop, kneel, crouch or crawl.

Store Hours:

Monday - Friday 7:00 AM - 8:00 PM

Saturday 8:00 AM - 7:00 PM

Sunday 10:00 AM - 6:00 PM

Pickup Hours:

Monday - Friday 7:00 AM - 7:00 PM

Saturday 8:00 AM - 7:00 PM

Sunday 10:00 AM - 6:00 PM

Benefits & Rewards:

Bonus opportunities & career advancement opportunities at every level

Programs that help you reach your financial goals: 401k with company match, Employee Stock Purchase Plan, and Referral Bonus Program

Medical, Dental, Vision, Life, and other Insurance Plans (subject to eligibility criteria)

Work-life balance, including:

• Paid vacation and sick time for eligible associates
• Paid holidays plus a personal holiday
• Paid Volunteer Time Off that starts on Day 1

Equal Employment Opportunity:

Floor & Decor provides equal employment opportunities to all associates and applicants without regard to age, race, color, religion or creed, national origin or ancestry, sex (including pregnancy), sexual orientation, gender, gender identity, disability, veteran status, genetic information, ethnicity, citizenship, or any other category protected by law. This policy applies to all areas of employment, including recruitment, testing, screening, hiring, selection for training, upgrading, transfer, demotion, layoff, discipline, termination, compensation, benefits and all other privileges, terms and conditions of employment. This policy and the law prohibit employment discrimination against any associate or applicant on the basis of any legally protected status outlined above.

Pay Range: $15.78 - $22.82

This position is responsible for designing, building, and maintaining store product displays. Full-time and part-time positions available.

• Design and build store product displays per the department manager in each department.
• Create a calendar for each month with a plan for all displays being built.
• Work with the inventory control specialist to submit write-offs and maintain inventory for materials.

One year of construction or building experience, or an equivalent combination of education and experience sufficient to perform the essential functions of the job, as determined by the company. Additional relevant experience can be substituted for the required education on the basis of one calendar year of experience for one academic year of education.

Demonstrated ability to abide by and exhibit proactive adherence to all safety regulations and policies.

Demonstrated experience in wood working, tile setting, use of power tools, use of measuring tools, and use of basic tools.

While performing the duties of this job, the employee is occasionally exposed to a warehouse environment and moving vehicles. The noise level in the work environment is typically moderate noisy.

Physical/Sensory Requirements:

• Physical work ability to exert 30 60 pounds of force occasionally, and or 20-30 pounds of force frequently, and/or greater than negligible up to 20 pounds of force constantly to lift, carry push, pull, or otherwise move objects.
• The employee is often required to use their hands and fingers, to handle or feel. The employee is frequently required to stand, walk, reach with arms and hands, climb or balance, and to stoop, kneel, crouch or crawl.

Note: All duties and responsibilities listed are considered to be essential job functions and requirements, and are subject to possible modification to reasonably accommodate individuals with disabilities.

Store Hours:

• Monday - Friday 7:00 AM - 8:00 PM
• Saturday 8:00 AM - 7:00 PM
• Sunday 10:00 AM - 6:00 PM

Pickup Hours:

• Monday - Friday 7:00 AM - 7:00 PM
• Saturday 8:00 AM - 7:00 PM
• Sunday 10:00 AM - 6:00 PM

Benefits & Rewards:

• Bonus opportunities & career advancement opportunities at every level
• Programs that help you reach your financial goals: 401k with company match, Employee Stock Purchase Plan, and Referral Bonus Program
• Medical, dental, vision, life, and other insurance plans (subject to eligibility criteria)
• Work-life balance, including: paid vacation and sick time, paid holidays plus a personal holiday, paid volunteer time off that starts on day 1

Equal Employment Opportunity:

Floor & Decor provides equal employment opportunities to all associates and applicants without regard to age, race, color, religion or creed, national origin or ancestry, sex (including pregnancy), sexual orientation, gender, gender identity, disability, veteran status, genetic information, ethnicity, citizenship, or any other category protected by law. This policy applies to all areas of employment, including recruitment, testing, screening, hiring, selection for training, upgrading, transfer, demotion, layoff, discipline, termination, compensation, benefits, and all other privileges, terms, and conditions of employment. This policy and the law prohibit employment discrimination against any associate or applicant on the basis of any legally protected status outlined above.

Pay Range: $16.34 - $24.26

Purpose: The Overnight Receiving Supervisor is responsible for directing and overseeing the warehouse operations of each retail store. In addition, the Overnight Receiving Supervisor is responsible for supervising warehouse specialists, order pickers and forklift operators; will manage the daily freight schedule based on customer and inventory needs.

Minimum Eligibility Requirements:

• 1-3 years of previous supervisory experience required (preferably in a warehouse or distribution center environment)
• Excellent interpersonal, team building, delegating and follow-up skills
• Ability to work with and maintain effective working relationships with other departments in the company
• Effective communication skills (oral and written)
• Competent in performing basic mathematical calculations
• Strong computer skills, with the ability to work in Windows-based systems
• Ability to work in a fast paced environment and meet established deadlines
• Available to work extended hours, especially during peak seasons

Essential Functions:

• Responsible for the daily scheduling of warehouse personnel to ensure proper manning in order to ship and receive products at the store in a productive and cost-efficient manner
• Direct the day-to day activities of the warehouse. Such activities include shipping, receiving, maintenance, inventory control, etc.
• Responsible for the warehouse as it pertains to Storage Buy transactions, receiving errors, and staging of products
• Responsible for maintenance of warehouse equipment, providing both preventive maintenance programs and communicating all necessary repairs to CEM and/or Operations Manager. Ensure that the warehouse personnel have safe, efficient equipment in order to perform the distribution functions
• Responsible for warehouse safety programs in order to provide a safe and clean workplace for employees and within the regulations of all OSHA local and state regulations
• Ensure all associates are trained and following all standard operating procedures
• Responsible for the progressive disciplinary process in the area of counseling, oral and written warnings; ensures a productive labor climate in the warehouse operation
• Handle general employee inquiries and solves problems
• Coordinate with other departments to facilitate efficient warehouse operations
• Complete necessary Activity Reports for management
• Monitor the flow of paperwork from Receiving to Inventory Control Specialist for timely data entry
• Resolve discrepancies with shipping, invoices, packing slips, and receiver reports
• Responsible for the execution of the Storage Buy Audit COP.
• Ensure products are staged for counting and inspection
• Ensure products are stored properly to conserve space and comply with safety procedures
• Oversee the rotation of inventories within the warehouse
• Perform other related duties as directed by management

Working Conditions (travel, hours, environment): While performing the duties of this job, the employee is frequently exposed to a warehouse environment and moving vehicles. The noise level in the work environment is typically moderate to noisy.

Physical/Sensory Requirements: Physical Work Ability exert 30 60 pounds of force occasionally, and or 20-30 pounds of force frequently, and/or greater than negligible up to 20 pounds of force constantly to lift, carry push, pull, or otherwise move objects. The employee is often required to use their hands and fingers, to handle or feel. The employee is frequently required to stand, walk, reach with arms and hands, climb or balance, and to stoop, kneel, crouch or crawl.

Store Hours: Monday - Friday 7:00 AM - 8:00 PM, Saturday 8:00 AM - 7:00 PM, Sunday 10:00 AM - 6:00 PM

Pickup Hours: Monday - Friday 7:00 AM - 7:00 PM, Saturday 8:00 AM - 7:00 PM, Sunday 10:00 AM - 6:00 PM

Benefits & Rewards: Bonus opportunities & career advancement opportunities at every level, Programs that help you reach your financial goals: 401k with company match, Employee Stock Purchase Plan, and Referral Bonus Program, Medical, Dental, Vision, Life, and other Insurance Plans (subject to eligibility criteria), Work-life balance, including: Paid vacation and sick time for eligible associates, Paid holidays plus a personal holiday, Paid Volunteer Time Off that starts on Day 1

Equal Employment Opportunity: Floor & Decor provides equal employment opportunities to all associates and applicants without regard to age, race, color, religion or creed, national origin or ancestry, sex (including pregnancy), sexual orientation, gender, gender identity, disability, veteran status, genetic information, ethnicity, citizenship, or any other category protected by law. This policy applies to all areas of employment, including recruitment, testing, screening, hiring, selection for training, upgrading, transfer, demotion, layoff, discipline, termination, compensation, benefits and all other privileges, terms and conditions of employment. This policy and the law prohibit employment discrimination against any associate or applicant on the basis of any legally protected status outlined above.

Location: Chicago, Illinois

Business Unit: Rush Medical Center

Hospital: Rush University Medical Center

Department: Int Med Rheumatology

Work Type: Full Time (Total FTE 1.0)

Shift: Shift 1

Work Schedule: 8 Hr (8:30 AM - 5:30 PM)

Rush offers exceptional rewards and benefits learn more at our Rush benefits page ( ).

Pay Range: $25.20 - $39.69 per hour

Rush salaries are determined by many factors including, but not limited to, education, job-related experience and skills, as well as internal equity and industry specific market data. The pay range for each role reflects Rush’s anticipated wage or salary reasonably expected to be offered for the position. Offers may vary depending on the circumstances of each case.

Summary:

Provides quality patient care in an efficient and cost-effective manner. Applies knowledge of the modality to produce quality diagnostic images. Exemplifies the Rush mission, vision and values and acts in accordance with Rush policies and procedures including complying with all Rush University Medical Center Customer Service Standards. Exemplifies the Rush mission, vision and values and acts in accordance with Rush policies and procedures.

Other information:

Required Job Qualifications:

• Formal training in an accredited Radiologic Technology Program.

• Valid Illinois Emergency Management Agency (IEMA) license.

• Registry or Registry-eligible with the American Registry of Radiologic Technologists.

• Proficient in modality physics and operation of equipment.

• Knowledge of human anatomy, pathology and physiology.

• Demonstrates good interpersonal and communication skills and ability to work in a team-oriented environment.

• LEVEL 1JC (Job #2381): Radiography registry - Proficient in basic X-ray exams.

• LEVEL 2JC (Job #2383): Proficient in 2 modalities: Meets Level 1 requirements AND proficient in OPERATING ROOM X-RAY OR GI-FLUORO OR ECG OR PHLEBOTOMY OR CLINICAL INSTRUCTOR.

• LEVEL 3JC (Job #2386): Proficient in 3 modalities; meets Level 2 requirements AND proficient in OPERATING ROOM X-RAY OR GI-FLUORO OR ECG OR PHLEBOTOMY OR CLINICAL INSTRUCTOR.

• LEVEL 4JC (Job #3383): Proficient in 4 modalities; meets Level 3 requirements AND proficient in OPERATING ROOM X-RAY OR GI-FLUORO OR ECG OR PHLEBOTOMY OR CLINICAL INSTRUCTOR.

Physical Demands:

• Requires full range body motion including handling and lifting patients when necessary.

• Requires manual and finger dexterity and eye-hand coordination.

Responsibilities:

1. Provides quality patient care as defined by departmental and Age Specific standards of care.

2. Maintains patient privacy and confidentiality.

3. Follows departmental protocols and procedures in the performance of exams and produces work that meets quality standards.

4. Produces work in an efficient manner that meets departmental productivity standards.

5. Maintains the physical work environment in a manner that meets departmental and regulatory requirements.

6. Has a working knowledge of the imaging systems, Radiology Information System and PACS.

7. Reports supply shortage or equipment failure to section supervisor.

8. Follows work and patient schedules.

9. Assist Radiologist in the performance of procedures.

10. Handles, administers and documents medications under the supervision of a radiologist and following the guidelines of the Rush Pharmacy and technical licensure.

11. Maintains logs and documentation as per departmental protocol.

12. Provides patient history or information necessary for proper interpretation of the procedure.

13. Maintains licensure/registry status as determined by state or regulatory bodies.

14. Participates in the training and development of students assigned to area through clinical affiliations.

Rush is an equal opportunity employer. We evaluate qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, and other legally protected characteristics.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for a Composite Fabricator to join our Fabrication team in Everett and Renton, Washington.

As a Composite Fabricator, you will play a vital role in ensuring the highest standards of quality and safety in the production of non-metallic components for our Airplanes. Your expertise will be essential in fabricating and assembling parts with precision, utilizing various methods and equipment while adhering to established safety protocols. You will be responsible for maintaining a safe working environment, ensuring that all processes meet rigorous quality specifications. Your attention to detail and commitment to excellence will directly impact the integrity of our products.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.

Position Responsibilities:

• Fabricate, assemble, rework, repair, and finish a variety of non-metallic parts, tools, and assemblies to specifications using methods such as layup, foaming, bonding, molding, and drap forming.
• Operate mixers, impregnating equipment, heat treaters, curing equipment, formers, presses, and ovens according to established procedures, as well as various cutting equipment for flat pattern cuts of composite materials.
• Collaborate with Manufacturing and Engineering to provide input on design optimization for developmental and emergent projects.
• Utilize prints, charts, change notices, sketches, work orders, and engineering drawings to complete work assignments effectively.
• Impregnate materials and cut fabrics to size using appropriate tools such as knives and shears.
• Hand and machine finish parts to required tolerances, ensuring proper fit within completed assemblies.
• Sand and polish molds to achieve smooth surfaces and wrap mandrels with impregnated materials to meet specifications.
• Place vacuum bags over wrapped parts, test for leaks, and seal any identified leaks in pressure and vacuum bags.
• Prepare and apply protective materials, lacquers, and parting agents to molds, forms, and dies.
• Load, unload, and operate ovens, presses, and pressure bags during the curing process of parts and assemblies.
• Drill, trim, seal, part-mark, sand, and edge break parts to meet production requirements.
• Select and secure appropriate tools, fixtures, and equipment to accomplish assigned work.
• Use shop mathematics and precision measuring instruments to ensure accuracy in work assignments.
• Perform Total Preventive Maintenance (TPM) on equipment, including cleaning, oiling, greasing, and changing filters to maintain optimal operation.

Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.
• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.
• Work in environments that may involve contact with metals, solvents, and coolants.
• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.
• Adapt to varying noise levels and atmospheric conditions.
• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a "US Person" as defined by 22 C.F.R. § 120.62 is required. "US Person" includes US Citizen, lawful permanent resident, refugee, or asylee

Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.

Basic Qualifications:

• 3 months or more reading and interpreting engineering drawings and specifications (e.g., blueprint/schematic reading, specification, change, design).
• 3 months or more with structure materials and processes including metals, composites, bonded and bolted joints.
• 3 months or more experience accessing a database for details work instructions.
• 3 months or more experience using precision measuring tools (i.e. micrometers, calipers, depth gauges, etc.).
• 3 months or more experience in composite fabrication.
• Must be able to lift, push, pull up to 35 pounds frequently within an 8 hour shift.
• Must be able to walk constantly throughout the workday; stand 6-8 hours per day; climb or work from stairs/steps up to 8 hours per day; climb ladders; bend and twist frequently up to six hours per day; squat and kneel.

Preferred Qualifications:

• Comfortable working from high/exposed places, tight spaces and working from ladders.
• Ability to work in noisy environments while completing tasks.

Conflict of Interest:Successful candidates for this position must successfully complete the Company's Conflict of Interest (COI) assessment process.

Typical Education & Experience:

High school graduate or GED preferred.

Relocation:

Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement:

This position is for a variety of shifts.

Total Rewards & Pay Transparency:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay: $24.32/hour, with potential to earn up to $48.90/hour in accordance with the terms of the relevant collective bargaining agreement.

Applications for this position will be accepted until Mar. 31, 2026

Language Requirements

English Preferred

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for a Composite Fabricator to join our Fabrication team in Everett and Renton, Washington.

As a Composite Fabricator, you will play a vital role in ensuring the highest standards of quality and safety in the production of non-metallic components for our Airplanes. Your expertise will be essential in fabricating and assembling parts with precision, utilizing various methods and equipment while adhering to established safety protocols. You will be responsible for maintaining a safe working environment, ensuring that all processes meet rigorous quality specifications. Your attention to detail and commitment to excellence will directly impact the integrity of our products.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.

Position Responsibilities:

• Fabricate, assemble, rework, repair, and finish a variety of non-metallic parts, tools, and assemblies to specifications using methods such as layup, foaming, bonding, molding, and drap forming.

• Operate mixers, impregnating equipment, heat treaters, curing equipment, formers, presses, and ovens according to established procedures, as well as various cutting equipment for flat pattern cuts of composite materials.

• Collaborate with Manufacturing and Engineering to provide input on design optimization for developmental and emergent projects.

• Utilize prints, charts, change notices, sketches, work orders, and engineering drawings to complete work assignments effectively.

• Impregnate materials and cut fabrics to size using appropriate tools such as knives and shears.

• Hand and machine finish parts to required tolerances, ensuring proper fit within completed assemblies.

• Sand and polish molds to achieve smooth surfaces and wrap mandrels with impregnated materials to meet specifications.

• Place vacuum bags over wrapped parts, test for leaks, and seal any identified leaks in pressure and vacuum bags.

• Prepare and apply protective materials, lacquers, and parting agents to molds, forms, and dies.

• Load, unload, and operate ovens, presses, and pressure bags during the curing process of parts and assemblies.

• Drill, trim, seal, part-mark, sand, and edge break parts to meet production requirements.

• Select and secure appropriate tools, fixtures, and equipment to accomplish assigned work.

• Use shop mathematics and precision measuring instruments to ensure accuracy in work assignments.

• Perform Total Preventive Maintenance (TPM) on equipment, including cleaning, oiling, greasing, and changing filters to maintain optimal operation.

Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.

• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.

• Work in environments that may involve contact with metals, solvents, and coolants.

• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.

• Adapt to varying noise levels and atmospheric conditions.

• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.62 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee

Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.

Basic Qualifications:

• 3 months or more reading and interpreting engineering drawings and specifications (e.g., blueprint/schematic reading, specification, change, design).

• 3 months or more with structure materials and processes including metals, composites, bonded and bolted joints.

• 3 months or more experience accessing a database for details work instructions.

• 3 months or more experience using precision measuring tools (i.e. micrometers, calipers, depth gauges, etc.).

• 3 months or more experience in composite fabrication.

• Must be able to lift, push, pull up to 35 pounds frequently within an 8 hour shift.

• Must be able to walk constantly throughout the workday; stand 6-8 hours per day; climb or work from stairs/steps up to 8 hours per day; climb ladders; bend and twist frequently up to six hours per day; squat and kneel.
  
   

Preferred Qualifications:

• Comfortable working from high/exposed places, tight spaces and working from ladders.

• Ability to work in noisy environments while completing tasks.

Conflict of Interest:
Successful candidates for this position must successfully complete the Company’s Conflict of Interest (COI) assessment process.

Typical Education & Experience:

High school graduate or GED preferred.

 

Relocation:

Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.

 

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

 

Union Representation Statement:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

 

Shift Work Statement :

This position is for a variety of shifts.

Total Rewards & Pay Transparency:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

 

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

 

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay : $24.32/hour, with potential to earn up to $48.90/hour in accordance with the terms of the relevant collective bargaining agreement.

Applications for this position will be accepted until Mar. 31, 2026

Language Requirements

English Preferred

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.