Pathgroup Test List Jobs in Usa

• Determine Detail/Hardware locations per blueprints and mylars
• Set-up and operate Drill Press, Pneumatic drills, \"C\" squeezes, Hand Squeezes, Rivet Pullers.
• Set up countersinks per fastener requirements and shop router
• Monitor and work with very tight tolerances
• Drill holes in structure and subassemblies, and attaches brackets, hinges, or clips to secure installation or to fasten subassemblies per blueprint and customer specifications.
• Install units, parts, equipment, and components in structural assembly, according to blueprints and specifications, using hand tools and power tools.
• Bolt, screw, or rivet accessories to fasten, support, or hang components and subassemblies.
• Locate and mark reference points and holes for installation of parts and components, using jigs, templates, and measuring instruments.
• Inspects and tests installed units, parts, and equipment for fit, performance, and compliance with standards, using measuring instruments and test equipment.
• Position and align subassemblies in jigs or fixtures, using measuring instruments, following blueprint lines and index points.
• Complete all required training and any additional training required by supervisor.
• Complete quality documentation
• Perform preventative maintenance on assembly presses and tooling
• Verify part and hardware count to shop router
• This position requires regular and reliable attendance. Occasional overtime may be required
• Other duties as assigned

• Experience and Education
  • 0-1 years of relevant experience
  • High school degree or equivalent

• Technical Skills:
  
  • Excellent attention to detail
  • Strong hand-eye coordination
  • Ability to read, understand and interpret engineering drawings and specifications (e.g., blueprint reading, specification, change, design).
  • Working knowledge of aircraft manufacturing, instructions and blueprints
  • Working knowledge of customer specifications and requirements
  • Ability to use calipers, micrometers, etc.
  • Mastery of basic math (addition, subtraction, multiplication, division, and fractions)
  • Strong teamwork and communication skills to get along with co-workers and be a team player
  • Understand and obey safety requirements
  • Commitment to keep work area clean and free of debris

• Physical Requirements:
  • Must be able to lift and/or move up to 50lbs
  • Specific vision abilities include close and distance vision, depth perception and ability to adjust focus
  • Ability to use hands to finger, handle, or feel, as well as reach with hands and arms for extended periods of time
  • Capable of standing for long periods

• 
  
• You will perform reviews of documents associated with completed work and trade processes.
  
• You will keep shop personnel apprised of new technologies, procedures, and tooling improvements associated, approved, and adopted for welding work.
  
• You will provide process improvements and work with engineering to reduce cost and improve the overall efficiency of the welding and non-destructive test program.
  
• You will inspect completed and in process work for quality of workmanship and adherence to requirements, specifications, standards, plans and schedules.
  
• You will train and mentor less skilled employees, demonstrate proper work methods, and discuss viable alternatives and considerations.
  
• You will serve as an Expert Welder leading a group to ensure work assignments are completed.
  

• 
  
• Must be a US Citizen.
  
• Must be determined suitable for federal employment.
  
• Must participate in the direct deposit pay program.
  
• New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit
  
• Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.
  
• Males born after 12-31-59 must be registered for Selective Service.
  
• This is a bargaining unit position.
  
• You will be required to successfully complete a pre-appointment physical examination.
  
• This position requires the ability to lift and carry items weighing 50 pounds.
  
• Successful completion of a pre-employment drug test (including marijuana) is required. A tentative offer of employment will be rescinded if you fail to report to the drug test appointment or fail the test. You will be subject to random testing.
  
• You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.
  
• You will be required to wear personal protective equipment such as helmets, gloves, coveralls, glasses, goggles, respirators and safety shoes continuously for the duration of the work shift.
  
• Work is performed in areas where potentially harmful physical and chemical agents are present (e.g. fumes, dust, heat, ionizing and non-ionizing radiation and chemicals). You will be required to participate in medical surveillance programs.
  
• This position may require travel from normal duty station to CONUS and OCONUS and may include remote or isolated sites. You must be able to travel on military and commercial aircraft for extended periods of time.
  
• This position requires the ability to climb vertical ladders when working aboard ships and submarines, and occasional work from ladders, platforms and staging areas.
  
• This position may be subject to work an uncommon tour, including nights, weekends, and holidays to meet mission requirements. Overtime or night differential pay and/or unusual duty hours may be required.
  
• This position requires rotating shift work.
  
• Must hold two common welding qualifications in either SMAW, GTAW, GMAW, Flame Spray, Sub Arc, Hull Cuts, Robotic, etc.
  
• Must maintain visual inspection qualifications per VT-271.
  

• 
  
• You will inspects completed and in process work for quality of workmanship and adherence to requirements, specifications, standards, plans and schedules.
  
• You will train and mentor less skilled employees. Demonstrate proper work methods and discuss viable alternatives, considerations, etc.
  
• You will perform research to continually improve trade processes and keeps shop personnel apprised of new technologies, procedures, best practices, and tooling improvements.
  
• You will assure safety and housekeeping rules are followed.
  
• You will plan, operate, and troubleshoot various types of equipment utilized to manufacture and overhaul marine components from start to post-work review.
  
• You will pass instructions received from supervisors and provides overview of tasks to be performed to other workers.
  
• You will serve as an Expert Machinist leading a group to ensure work assignments are completed.
  

• 
  
• Must be a US Citizen.
  
• Must be determined suitable for federal employment.
  
• Must participate in the direct deposit pay program.
  
• New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit
  
• Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.
  
• Males born after 12-31-59 must be registered for Selective Service.
  
• This is a bargaining unit position.
  
• You will be required to successfully complete a pre-appointment physical examination and complete annual physicals.
  
• You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.
  
• You will be required to complete training, obtain, and maintain a government credit card for travel and travel-related purchases.
  
• You will be required to wear personal protective equipment such as helmets, gloves, coveralls, glasses, goggles, respirators and safety shoes continuously for the duration of the work shift.
  
• Work is performed in areas where potentially harmful physical and chemical agents are present (e.g. fumes, dust, heat, ionizing and non-ionizing radiation and chemicals). You will be required to participate in medical surveillance programs.
  
• This position may require travel from normal duty station to CONUS and OCONUS and may include remote or isolated sites. You must be able to travel on military and commercial aircraft for extended periods of time.
  
• This is a Mission Essential position. You will be required to ensure organization or facility continuity of operations and/or completion of tasks that are considered essential to the mission designated by a local or command decision.
  
• Work is performed in shops and aboard ships and submarines which requires working from uncomfortable and cramped positions which involve stooping, bending, kneeling, reaching and climbing ladders.
  
• This position requires the ability to lift and carry items weighing up to 60 pounds.
  
• This position is subject to work an uncommon tour, including nights, weekends, and holidays to meet mission requirements. Overtime or night differential pay and/or unusual duty hours may be required.
  
• This position requires rotating shift work.
  
• This may be a Drug Testing position. If so, successful completion of a pre-employment drug test (including marijuana) is required.
  
• A tentative offer of employment will be rescinded if you fail to report to the drug test appointment or fail the test. You may be subject to random drug testing.
  

• 
  
• You will be assisting journeyman Riggers in rigging up hoisting and pulling gear for lifting, moving, and positioning heavy loads.
  
• You will be assisting in fabricating, installing, and repairing standing and running rigging, wire and fiber rope items such as slings, towing bridles, nets, and other ship and boat rigging and handling of test weights.
  
• You will be operating an electric, gasoline, or diesel powered fork lift trucks which are capable of lifting loads weighing 10,000 pounds or more.
  
• You will be driving fork lift trucks over rough and sometimes muddy terrain through narrow aisles in outside storage areas.
  

• 
  
• Must be a US Citizen.
  
• Must be determined suitable for federal employment.
  
• Must participate in the direct deposit pay program.
  
• New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit
  
• Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.
  
• Males born after 12-31-59 must be registered for Selective Service.
  
• This may be a bargaining unit position.
  
• You may be required to successfully complete a pre-appointment physical examination.
  
• You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.
  
• This may be a Drug Testing position. If so, successful completion of a pre-employment drug test (including marijuana) is required.
  
• A tentative offer of employment will be rescinded if you fail to report to the drug test appointment or fail the test. You may be subject to random drug testing.
  
• You may be required to wear personal protective equipment such as helmets, gloves, coveralls, glasses, goggles, respirators and safety shoes continuously for the duration of the work shift.
  
• Work may be performed in areas where potentially harmful physical and chemical agents are present (e.g. fumes, dust, heat, ionizing and non-ionizing radiation and chemicals). You may be required to participate in medical surveillance programs.
  
• This position may require exposure to high noise levels.
  
• This position may require travel from normal duty station to CONUS and OCONUS and may include remote or isolated sites. You must be able to travel on military and commercial aircraft for extended periods of time.
  
• This position may be subject to work an uncommon tour, including nights, weekends, and holidays to meet mission requirements. Overtime or night differential pay and/or unusual duty hours may be required.
  
• A tentative offer of employment will be rescinded if the selectee fails to meet the pre-employment requirements, including failure to report to any of the scheduled appointments.
  
• You may be required to lift 100 pounds and occasionally carry equipment that weighs up to 60 pounds.
  
• Work may be performed in shops and aboard ships and submarines, which requires working from uncomfortable and cramped positions which involve stooping, bending, kneeling, reaching, and climbing.
  
• You may be required to climb vertical ladders and occasionally perform work from ladders and platforms.
  

• 
  
• You will set up and operate most types of conventional and computer numerical control machine tools such as lathes, vertical and horizontal boring mills; bench, milling machines; shapers; planers; grinders; thread cutters and drills.
  
• You will utilize many types of precision instruments and equipment such as vernier calipers, squares, protractors, micrometers, vee blocks, parallel bars, dial indicators, comparators, different gauges for accurate dimensions and tolerances.
  
• You will plan and lay out work from blueprints, work sheets, and drawings that may have missing or incorrect information.
  
• You will use shop mathematics and handbook formulas in computing and verifying dimensions in the planning, laying out, and final dimensional checking processes.
  
• You will produce desired cuts and finishes on various metals and other materials such as aluminum, brass, bronze, high carbon and alloy steels, chrome, nickel, titanium, molybdenum, super alloys, nylon, rubber, plastics, teflon, etc.
  

• 
  
• Must be a US Citizen.
  
• Must be determined suitable for federal employment.
  
• Must participate in the direct deposit pay program.
  
• New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit
  
• Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.
  
• Males born after 12-31-59 must be registered for Selective Service.
  
• This may be a bargaining unit position.
  
• You may be required to successfully complete a pre-appointment physical examination.
  
• You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.
  
• This may be a Drug Testing position. If so, successful completion of a pre-employment drug test (including marijuana) is required.
  
• A tentative offer of employment will be rescinded if you fail to report to the drug test appointment or fail the test. You may be subject to random drug testing.
  
• You may be required to wear personal protective equipment such as helmets, gloves, coveralls, glasses, goggles, respirators and safety shoes continuously for the duration of the work shift.
  
• Work may be performed in areas where potentially harmful physical and chemical agents are present (e.g. fumes, dust, heat, ionizing and non-ionizing radiation and chemicals). You may be required to participate in medical surveillance programs.
  
• This position may require exposure to high noise levels.
  
• This position may require travel from normal duty station to CONUS and OCONUS and may include remote or isolated sites. You must be able to travel on military and commercial aircraft for extended periods of time.
  
• This position may be subject to work an uncommon tour, including nights, weekends, and holidays to meet mission requirements. Overtime or night differential pay and/or unusual duty hours may be required.
  

• 
  
• You will perform reviews of documents associated with completed work and trade processes.
  
• You will keep shop personnel apprised of new technologies, procedures, and tooling improvements associated, approved, and adopted for welding work.
  
• You will provide process improvements and work with engineering to reduce cost and improve the overall efficiency of the welding and non-destructive test program.
  
• You will inspect completed and in process work for quality of workmanship and adherence to requirements, specifications, standards, plans and schedules.
  
• You will train and mentor less skilled employees, demonstrate proper work methods, and discuss viable alternatives and considerations.
  
• You will serve as an Expert Welder leading a group to ensure work assignments are completed.
  

• 
  
• Must be a US Citizen.
  
• Must be determined suitable for federal employment.
  
• Must participate in the direct deposit pay program.
  
• New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit
  
• Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.
  
• Males born after 12-31-59 must be registered for Selective Service.
  
• This is a bargaining unit position.
  
• You will be required to successfully complete a pre-appointment physical examination.
  
• This position requires the ability to lift and carry items weighing 50 pounds.
  
• Successful completion of a pre-employment drug test (including marijuana) is required. A tentative offer of employment will be rescinded if you fail to report to the drug test appointment or fail the test. You will be subject to random testing.
  
• You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.
  
• You will be required to wear personal protective equipment such as helmets, gloves, coveralls, glasses, goggles, respirators and safety shoes continuously for the duration of the work shift.
  
• Work is performed in areas where potentially harmful physical and chemical agents are present (e.g. fumes, dust, heat, ionizing and non-ionizing radiation and chemicals). You will be required to participate in medical surveillance programs.
  
• This position may require travel from normal duty station to CONUS and OCONUS and may include remote or isolated sites. You must be able to travel on military and commercial aircraft for extended periods of time.
  
• This position requires the ability to climb vertical ladders when working aboard ships and submarines, and occasional work from ladders, platforms and staging areas.
  
• This position may be subject to work an uncommon tour, including nights, weekends, and holidays to meet mission requirements. Overtime or night differential pay and/or unusual duty hours may be required.
  
• This position requires rotating shift work.
  
• Must hold two common welding qualifications in either SMAW, GTAW, GMAW, Flame Spray, Sub Arc, Hull Cuts, Robotic, etc.
  
• Must maintain visual inspection qualifications per VT-271.
  

Utah Transit Authority Description Embark on an exhilarating journey as a Bus Dispatcher, Police Dispatcher, or Dispatcher Trainee, where each day brings dynamic challenges and opportunities for service to your community.

As a Trainee, you will receive hands-on training to master the art of coordinating emergency and non-emergency transit calls, operating state-of-the-art communication equipment, and connecting Employees and Riders to the resources and to the help that they need.

You will play a pivotal role in driving the success of our Transit Communications Center (TCC) and contributing to the overall excellence of UTA.

Once you move on from the trainee role, you will either focus on Fixed Route Bus Operations Dispatching or Emergency and Public Safety Police Dispatching.

Advancing to Fixed Route Bus Operations or Police Dispatcher level is based on meeting the minimum qualifications, satisfactory job performance, and a 1-year training and probationary period.

Join us for an impactful journey where what you do truly matters, both to UTA and to the public, and where you will be right at the heart of our transit operations and services.

As a TCC Dispatcher Trainee you will: Train and learn Transit Police dispatch and/or Fixed Route Bus Operations Dispatch.

Under general supervision, trainees learn to perform dispatching duties for both emergency and non-emergency transit calls.

Trainees operate a variety of communication equipment, including radio, telephone, and computer systems.

Assist in coordinating continuous operation and support services for various transit system personnel, such as bus operators, transit police, operations supervisors, paratransit coordinators, and rail controllers.

Actively participate in resolving problems as they arise within the transit system.

Receive, prioritize, and respond to routine and emergency calls, dispatching transit police officers and/or operations personnel as needed.

Handle inquiries requiring research on warrants, UTA violation history, criminal history, mapping systems, system detour information, and other databases.

Work with other public agencies outside UTA with transit-related issues upon request.

Contribute to collecting and disseminating system-related data to all relevant departments.

Maintain focus, calm, and composure while demonstrating compassion and efficiency, especially during stressful, fast-paced, and unpredictable situations.

In addition to the duties listed as a trainee, as a Fixed Route Bus Operations Dispatcher , you will: Specialize in the performance of non-emergency calls and dispatch appropriate personnel/resources to assist our drivers as situations arise.

Coordinate continuous operation and system support services for bus operators, operations supervisors, paratransit coordinators, rail controllers and/or other persons in the transit system in resolving problems.

Receive, prioritize, and respond to all routine calls and as needed to minimize delays due to breakdowns, detours, work coverage, accidents, emergencies, changing road conditions and other interruptions.

In addition to the duties listed as a trainee, as an Emergency and Public Safety Police Dispatcher you will: Specialize in the performance of emergency transit calls and dispatch appropriate first responder personnel/resources to assist our riders and drivers as situations arise.

Coordinate continuous operation and system support services for transit police, other first responder personnel in the transit system in resolving emergency problems.

Receive, prioritize, and respond to all Emergency calls to provide emergency assistance as needed.

Receive and respond to inquiries requiring research of warrants, UTA violation history and criminal history, mapping systems, system detour information, and other databases.

Minimum Qualifications EXPERIENCE/EDUCATION/TRAINING To be hired as a TCC Dispatcher Trainee, you must have: Two years in customer service solving problems and giving direction.

High School Diploma or equivalent plus two years post-high school training or college education with emphasis on communications and/or business management, or related fields preferred.

Emergency Medical Dispatch Certification preferred or ability to obtain within 1 year.

POST Dispatch Certification preferred or the ability to obtain within 1 year.

CPR/First Aid Certification preferred or the ability to obtain within 1 year.

Bilingual English/Spanish Speaking Preferred, but not required In addition to the education and certification requirements listed under the Trainee above, to be hired directly to a position as a Fixed Route Bus Dispatcher you must have: 2 years of fixed route bus dispatch experience or similar experience outside of UTA, with experience in solving problems and giving direction, or 1 year experience as a Dispatcher in either the Emergency and Public Safety or Fixed Route Bus Operations functions at UTA specifically.

Bilingual English/Spanish Speaking Preferred, but not required In addition to the education and certification requirements listed under the Trainee above, to be hired directly to a position as an Emergency and Public Safety Police Dispatcher, you must have: 2 years of Emergency or Public Safety Dispatch experience or similar experience, with experience in solving problems and giving direction, or 1 year experience as a Dispatcher in either the Emergency and Public Safety or Fixed Route Bus Operations functions at UTA specifically.

Bilingual English/Spanish Speaking Preferred, but not required KNOWLEDGE, SKILLS, ABILITIES Fixed Route Bus Operations Dispatchers Strong knowledge of all Fixed Route Bus Operations Systems and routes preferred.

Continuously demonstrate all operational required training, certifications, and core competencies Strong knowledge of bus equipment to assist operators with mechanical issues preferred.

Able to orient yourself using a mapping system and can give instruction to drivers.

Vehicle maintenance familiarity and experience dealing with vehicle related issues.

Emergency and Public Safety Police Dispatchers Strong knowledge of all police required training, procedures, methods, certifications, and core competencies.

Strong understanding and able to interpret Utah Criminal Code, BCI / UCJIS manuals, and maps.

Become POST certified as a dispatcher through the state of Utah and maintain certification if not already certified.

All Dispatchers and Trainees Basic proficiency in MS Word and Excel preferred.

Excellent communication skills both verbally and in writing, including able to remain calm and rational in emergency situations and communicate with incoherent, emotionally distraught, hysterical, unresponsive, or non-receptive individuals.

40 WPM preferred.

Work Schedule Dispatchers and Trainees work in a control room setting, which operates 24/7/365.

Shifts are generally 4 10-hour shifts, determined by seniority with a shift bid, which occurs on an as-needed basis.

You must be willing to work nights, early mornings, weekends, and holidays as needed.

Background Check Requirements (All Dispatchers and Trainees) Have no convictions for a civil or criminal offense involving dishonesty, unlawful sexual conduct, physical violence to include domestic violence, DUI, or unlawful sale or possession of a controlled substance within the past 5 years.

As a Public Transit Organization, UTA is required to conduct background screening on all applicants we offer employment.

This background screening will include a criminal background check and FTA drug and alcohol screening.

Because this position works directly with Law Enforcement, employment may be contingent on passing a more comprehensive background investigation, including: Psychological testing Social Media review In person reference and acquaintance interview Prior employment history Motor vehicle history investigation BCI Criminal History
- OR
- An equivalent combination of relevant education and experience.

[UTA reserves the right to determine the equivalencies of education and experience.] A hiring roster may be used for up to 18 months, meaning UTA may consider you for future openings in this department for up to 18 months after you apply As a full-time Administrative Employee, your Total Rewards Benefits Package will include: Health, dental, vision, life/AD&D, short-term and long-term disability insurance, with Flexible Spending and Dependent Care accounts.

Choice between Traditional Co-Pay or High Deductible Health Plans for medical coverage.

HSA with company match available to employees enrolled in the HDHP.

Benefit plans include coverage for domestic partners (eligibility affidavit required for coverage).

Onsite Health and Wellness Clinics for medical care at no cost to employees, spouses, domestic partners, and dependent children.

22 days of accrued paid time off (13 vacation days and 9 sick days), which increases with tenure at UTA.

10 paid holidays and two paid (2) floating holidays per year.

Retirement options
- Pension Plan with 5-year vesting schedule and 457 Contribution Plan, available for immediate contributions and company matching.

Generous tuition reimbursement for higher education, available for any higher education degree (bachelor, master, or PHD).

Course of study must be approved prior to enrollment.

Training, development, and career advancement opportunities.

Paid parental leave for birth, adoption, and child placement (after 12 months of employment).

Free transit passes for employees, their spouses, and their dependent children.

Employee assistance program – includes counseling, legal services, financial planning, etc.

UTA Well – a comprehensive wellness program designed to support employees and dependents in their health and wellness goals.

Free on-site fitness facilities and discounted membership to VASA Fitness and EoS Fitness.

Discounted cell phone plans with T-Mobile and AT&T.

Pet insurance plan options (tailored plan coverage based on pet’s health and needs).

For more information on UTA’s Total Rewards benefits package, please visit: Pay Rate: Transit Communication Center Dispatch Trainee: Starting at $22.933 Transit Communication Center (Bus or Police) Dispatcher: Starting at $25.817 If interested, please apply before: Monday, March 30th, 2026 @ 11:59 PM MST PM21 Utah Transit Authority is an Equal Opportunity Employer of all persons regardless of race, color, religion, sex, national origin, age, disability, covered veterans, sexual orientation, and gender identity.

Women, minorities, and people with disabilities are encouraged to apply.

Applicants needing an accommodation under the Americans with Disabilities Act for any part of the application process should contact UTA Human Resources at 8

A minimum of two work days' notice prior to the need for the accommodation is required.

Utah Transit Authority is a drug-free workplace, subject to federal drug and alcohol testing regulations under 49 CFR Part 40, 655, and 219.

All offers for employment are contingent upon a successful pre-employment drug test.

If a pre-employment test returns a non-negative result, an application for employment may be rejected.

All employees are subject to reasonable suspicion and post-accident testing for drug and alcohol use.

All safety sensitive employees are subject to random testing for drug and alcohol use.

PI3fa81a0dcaba-25448-40009162

• 
  
• Develop QA/QC documents of the complete project including certificates, calibration, test results, inspection requests, non-compliance reports and site instruction/observations, permanent materials delivered, and other important QA/QC documents
  
• Follow all standards to perform inspection and tests on all procedures and oversee all testing methods and maintain high standards of quality for all processes
  
• Review the quality of all materials at the site and ensure compliance with all project specifications and quality and collaborate with the department for all material procurement and maintain a quality of materials
  
• Support the effective implementation of all test and inspection schedules and ensure adherence to all procedures and coordinate with various teams to perform quality audits on processes
  
• Assist employees to ensure knowledge of all quality standards and ensure compliance to all quality manuals and procedures and collaborate with contractors and suppliers to maintain the quality of all systems
  
• Manage to lift all types of equipment and handle the efficient storage of all hazardous materials and perform quality audits as per the required schedule
  
• Understand all products and non-conformance processes and evaluate all documents to ensure the maintenance of optimal quality and prepare monthly reports to evaluate performance
  
• Monitor an efficient system and record for all project activities and analyze all processes to ensure all work according to quality requirements
  
• Understand all work methods and maintain knowledge on all quality assurance standards and monitor continuous application for all quality assurance processes and recommend corrective actions for all processes
  
• Support and follow a method statement for the activity including risk assessment and job safety environmental analysis and Inspection Test Plan and Checklist based on specifications of the project
  
• Liaise the Technical Engineer for submission of material submittals to Consultant
  
• Develop and maintain inspection reports
  
• Ensure compliance to federal and state laws, as well as company standards and specifications
  
• Maintain calibration of quality testing equipment
  
• Perform inspections across all stages of production
  
• Advising on procedures to improve production efficiency
  
• Prepare and maintain test data for review
  
• Evaluate data and draft reports, noting any relevant deviations from existing standards
  
• Identify areas for quality control improvement and implement new methods accordingly
  
• Communicate quality or compliance concerns with urgency
  

• 
  
• Technical Military MOS, trade school and/or degree
  
• Experience and/or education and internship in complex facilities or mission critical projects is preferred
  
• Any civilian or military technical certifications is a plus
  
• Experience with writing and enforcing standard operating procedures (SOPs)
  
• Solid understanding of test equipment & software
  
• Minimum of 2-4 years of inspection and/or production experience
  
• Strong working knowledge of various mathematical concepts including fractions, ratios, and proportions
  
• Demonstrated ability to work independently with minimal supervision
  
• Excellent organizational skills
  
• Demonstrated ability to analyze and interpret information
  
• Must be a US Citizen
  
• Must be willing to travel 75%
  

• 
  
• Advanced Excel skills preferred
  
• Experience using Microsoft Office Suite, Word and Microsoft Project
  
• Basic knowledge of systems design for various projects
  

• 
  
• No certificates or licenses required
  

• 
  
• No supervisory responsibilities for this position.
  

• 
  
• Occasionally lift and or move objects 10 to 50; Frequently required to stand, walk, stoop, kneel, crouch or crawl. The employee is occasionally required to sit and climb or balance. Specific vision abilities for this job include close vision, distance vision, color vision, peripheral vision, depth perception and the ability to adjust and focus. Noise Level can be moderate to high.
  

• 
  
• Design / Engineering
  
  • 
    
  • Generate design documents for SCADA/Automation projects
    
    • 
      
    • Develop design document narratives
      
    • Perform requirements analysis
      
    • Generate Sequence of Operations (SOO) / System Functional Documentation
      
    • Create Subsystem Designs (CAD / Panels / Layouts / Wiring / SCADA Screens / Hardware / Communications)
      
    • Comment Resolution
      
    
    
    
  • Reviews and comments on 3rd party design documents for SCADA/Automation projects in support of large programs/projects
    
    • 
      
    • Review design document narratives
      
    • Perform execution and design scope gap analysis
      
    • Review Sequence of Operations / System Functional Documentation to ensure compliance with project requirements
      
    • Review Subsystem Designs (CAD / Panels / Layouts / Wiring / SCADA Screens / Hardware / Communications) for project compliance
      
    • Assist in reviewing project specifications
      
    • Assist in creation of testing plans and procedures for Integrated Systems Factory Testing
      
    
    
    
  
  
  
• Programming
  
  • 
    
  • Program / configure / troubleshoot Controllers, PLCs, RTUs, and/or HMI systems
    
  
  
  
• Testing / Troubleshooting / Deployment / Commissioning
  
  • 
    
  • Assist senior engineers in creating and updating testing and commissioning procedures
    
  • Preparation of test reports
    
  • Originates test procedures
    
  • Commissioning of deployed systems
    
  • Development of test equipment and simulation devices
    
  • Perform Factory and Field Testing
    
  
  
  
• Maintenance
  
  • 
    
  • Perform troubleshooting on service calls to existing and legacy system operators
    
  • Perform hardware / software upgrades and replacements on existing systems
    
  
  
  

• 
  
• Estimates
  
  • 
    
  • Assists senior engineers in preparation of cost estimates and supporting documentation
    
  • Work with relevant stakeholders to review scope of project
    
  • Conduct any surveys, inspections, tours, etc. of client sites, as required
    
  • Assists senior engineers in evaluation and pricing of change orders from vendors
    
  
  
  
• Personnel Management
  
  • 
    
  • Assigns tasks and coordinates with Technical Staff
    
  • Provides technical direction and on-the-job training to drafters, engineering technicians, and less experienced engineers.
    
  
  
  

• 
  
• Bachelor's degree in electrical engineering and 5-7 years field experience
  
• Associate degree in the electrical field and 10 years field experience
  
• High school diploma and 15 years field experience
  
• 5 years' experience with designing and servicing controls systems for switchgear, substations, metering and SCADA/Fault Data/SER/Integration-Automation equipment installation and testing
  
• Experience in reading electrical and control schematics
  
• Experience in electrical power monitoring systems (EPMS) startup, configuration, and calibration
  
• Experience in testing and troubleshooting control and protection systems
  
• Experience using basic electrical and hand tools
  
• Experience using testing, calibration, or industry-specific tools and software
  
• Experience testing, reading/verifying all voltage and current inputs to relays; verifying all metering (local and SCADA); calibrating all relays; trip testing (local and SCADA); verifying all alarms (local and SCADA); verifying all alarms (local and SCADA); verifying all function switches, etc.
  
• Experience with 3 phase power systems; power system protection & control schemes; test equipment; test equipment software
  
• Must be a US CITIZEN
  

• 
  
• Experience in OT and IT networking technologies and topologies
  
• Experience troubleshooting and diagnosing OT and IT networks and protocols
  
• Experience in CAD/CAE Software (Visio, AutoCAD)
  
• Experience in schedule management software (Project, Primavera P6)
  
• Standard Office Software (Microsoft Word, Excel, Access etc.)
  

• 
  
• Required Certifications
  
  • 
    
  • Certification in one or more PLC / Automation Platform, such as: Niagara N4, Schneider Power Monitoring, Rockwell, Siemens, JCI, Eaton Foreseer, etc.
    
  • Certification in one or more SCADA platforms, such as: Iconics, Ignition, Aveva, etc.
    
  
  
  
• Preferred Licenses / Certifications
  
  • 
    
  • Design Build Institute of America (DBIA)
    
  • Certified SCADA Security Architect (CSSA)
    
  • Certified Automation Professional (CAP)
    
  
  
  

• 
  
• While performing the duties of this job, the employee is regularly exposed to computer screens for an extended period of time; Sitting for extended periods of time; Reach by extending hands or arms in any direction; Have finger dexterity in order to manipulate objects with fingers rather than whole hands or arms, for example, using a keyboard; Listen to and understand information and ideas presented through spoken words and sentences; Communicate information and ideas in speaking so others will understand; Read and understand information and ideas presented in writing; Apply general rules to specific problems to produce answers that make sense; Identify and understand the speech of another person.
  

• 
  
• Design / Engineering
  
  • 
    
  • Assists Senior Engineers in design documents for SCADA/Automation projects
    
    • 
      
    • Developing design document narratives
      
    • Perform requirements analysis
      
    • Understanding of Sequence of Operations (SOO) / System Functional Documentation
      
    • Create Subsystem Designs (CAD / Panels / Layouts / Wiring / SCADA Screens / Hardware / Communications)
      
    • Comment Resolution
      
    
    
    
  • Reviews and comments on 3rd party design documents for SCADA/Automation projects in support of large programs/projects
    
    • 
      
    • Review design document narratives
      
    • Perform execution and design scope gap analysis
      
    • Review Sequence of Operations / System Functional Documentation to ensure compliance with project requirements
      
    • Review Subsystem Designs (CAD / Panels / Layouts / Wiring / SCADA Screens / Hardware / Communications) for project compliance
      
    • Assist in reviewing project specifications
      
    • Assist in creation of testing plans and procedures for Integrated Systems Factory Testing
      
    
    
    
  
  
  
• Programming
  
  • 
    
  • Program / configure / troubleshoot Controllers, PLCs, RTUs, and/or HMI systems
    
  
  
  
• Testing / Troubleshooting / Deployment / Commissioning
  
  • 
    
  • Assist senior engineers in creating and updating testing and commissioning procedures
    
  • Preparation of test reports
    
  • Originates test procedures
    
  • Commissioning of deployed systems
    
  • Development of test equipment and simulation devices
    
  • Perform Factory and Field Testing
    
  
  
  
• Maintenance
  
  • 
    
  • Perform troubleshooting on service calls to existing and legacy system operators
    
  • Perform hardware / software upgrades and replacements on existing systems
    
  
  
  

• 
  
• Estimates
  
  • 
    
  • Assists senior engineers in preparation of cost estimates and supporting documentation
    
  • Work with relevant stakeholders to review scope of project
    
  • Conduct any surveys, inspections, tours, etc. of client sites, as required
    
  • Assists senior engineers in evaluation and pricing of change orders from vendors
    
  
  
  
• Personnel Management
  
  • 
    
  • Assigns tasks and coordinates with Technical Staff
    
  • Provides technical direction and on-the-job training to drafters, engineering technicians, and less experienced engineers.
    
  
  
  

• 
  
• Bachelor degree in electrical or mechanical engineering and 2-5 years field experience
  
• Associate degree in the electrical or mechanical field (add 3 years field experience)
  
• High school diploma (add 5 years field experience)
  
• 2-5 years' experience with designing and servicing controls systems for switchgear, substations, metering and SCADA/Fault Data/SER/Integration-Automation equipment installation and testing
  
• Experience in reading electrical and control schematics
  
• Experience in electrical power monitoring systems (EPMS) startup, configuration, and calibration
  
• Experience in testing and troubleshooting control and protection systems
  
• Experience using basic electrical and hand tools
  
• Experience using testing, calibration, or industry-specific tools and software
  
• Experience testing, reading/verifying all voltage and current inputs to relays; verifying all metering (local and SCADA); calibrating all relays; trip testing (local and SCADA); verifying all alarms (local and SCADA); verifying all alarms (local and SCADA); verifying all function switches, etc.
  
• Experience with 3 phase power systems; power system protection & control schemes; test equipment; test equipment software
  
• MUST BE A US CITIZEN
  

• 
  
• Experience in OT and IT networking technologies and topologies
  
• Experience troubleshooting and diagnosing OT and IT networks and protocols
  
• Experience in CAD/CAE Software (Visio, AutoCAD)
  
• Experience in schedule management software (Project, Primavera P6)
  
• Standard Office Software (Microsoft Word, Excel, Access etc.)
  

• 
  
• Required Certifications
  
  • 
    
  • Certification in one or more PLC / Automation Platform, such as: Niagara N4, Schneider Power Monitoring, Rockwell, Siemens, JCI, Eaton Foreseer, etc.
    
  • Certification in one or more SCADA platforms, such as: Iconics, Ignition, Aveva, etc.
    
  
  
  
• Preferred Licenses / Certifications
  
  • 
    
  • Design Build Institute of America (DBIA)
    
  • Certified SCADA Security Architect (CSSA)
    
  • Certified Automation Professional (CAP)
    
  
  
  

• 
  
• While performing the duties of this job, the employee is regularly exposed to computer screens for an extended period of time; Sitting for extended periods of time; Reach by extending hands or arms in any direction; Have finger dexterity in order to manipulate objects with fingers rather than whole hands or arms, for example, using a keyboard; Listen to and understand information and ideas presented through spoken words and sentences; Communicate information and ideas in speaking so others will understand; Read and understand information and ideas presented in writing; Apply general rules to specific problems to produce answers that make sense; Identify and understand the speech of another person.