Nucor Jobs in Usa

Nucor is North America's largest recycler and most diversified steel and steel products company.

Since 1969, we've led the industry in developing innovative technologies for recycling scrap into high-quality steels that are all around us, from bridges and buildings to cars and appliances.

Basic Job Functions: American Buildings
- Illinois located in El Paso, IL is seeking qualified applicants for the position of Structural Fabricator Teammate.

Basic functions of the position include, but not limited to: Perform various fit up, tacking, and welding operations on a variety of structural assemblies.

Weld and follow all weld standards and procedures.

Add stiffeners, brackets, face plates, etc.

using prints for location prior to finish welding.

Use clamps, jigs, tape, square, arc air gouger, cutting torch and plasma as required using procedures, best practices and good judgment to prevent warping and misalignment of component parts.

Operate overhead cranes.

Maintain required records and documentation.

Inspect, detect and report improper operation, faulty equipment, defective materials and unusual conditions to proper leadership.

Maintain work area and equipment in a clean and orderly condition.

Follow prescribed safety rules and regulations and maintain quality standards.

Perform other related duties as requested.

Have a commitment to where help is needed and have a desire to be a valued department, division and Nucor teammate.

Safety is the most important part of all jobs within Nucor; therefore, candidates must be able to demonstrate the ability to initiate, lead, and uphold safety policies, practices, procedures, and housekeeping standards at all times.

Minimum Qualifications: High school diploma or equivalent.

Must pass AWS welding and Canadian certification.

Ability to read tape measure, square, and blueprint readings.

Ability to work 10
- 12 hour shifts Preferred Qualifications: Can read and understand weld symbols Can use an arc gouger Previous crane certification Previous experience in material handling Welding back ground; operational understanding and knowledge of standard welding practices and procedures.

Trained and confident in overhead crane use.

Minimum 1 year of fabrication experience in a manufaturing environment About Us: Nucor Buildings Group (NBG), a proud Nucor product group, is one of North America’s largest and most experienced manufacturers of metal building systems.

With multiple locations throughout the United States, NBG is proud to design world-class building solutions tailored to meet the needs of any market including commercial, industrial, agricultural, and institutional.

Our brands include American Buildings, CBC Steel Buildings, Kirby Building Systems, and Nucor Building Systems.

NBG offers work/life balance and a variety of benefits and performance incentives.

We take pride in connecting teammates to meaningful work and focus heavily on both personal and professional development.

Whether your background is in engineering and design, information technology and software development, marketing, or sales, with Nucor Buildings Group you can go as far as your drive and ambition will take you.

Why Nucor? When you join Nucor, America’s largest steel manufacturer and recycler, you’ll help create a variety of steel products that become so much more, for so many people.

And you won’t do it alone.

Our supportive culture builds each other up, values family, relationships, and puts safety above anything else.

With the freedom to take your ideas to the next level, there’s no end to what you can achieve.

This is your chance to build a lifelong career, give back to your community, make the world a better place – and BE PART OF SOMETHING BIGGER.

Job Security – Benefits – Bonus Programs- No Layoff Practice
- Pay for Performance With performance-based compensation, profit sharing, and a no-layoff practice, we take care of our teammates who design, engineer, fabricate, and support the products that define our company.

Ready to Make an Impact? If you’re ready to bring your skills, energy, and innovation to a company committed to building a stronger future, we want to hear from you! Apply today and become part of the American Buildings team in El Paso, IL.

Nucor is North America's largest recycler and most diversified steel and steel products company.

Since 1969, we've led the industry in developing innovative technologies for recycling scrap into high-quality steels that are all around us, from bridges and buildings to cars and appliances.

Basic Job Functions: The role of Purchasing Manager includes, but is not limited to, leading purchasing activities across multiple locations within Verco; supervising and developing division purchasing personnel and their processes; and driving results through strong relationships with internal stakeholders and suppliers.

Responsibilities include developing and enacting purchasing strategies, implementing process improvements/automation utilizing modern technology stack, negotiating contracts to improve financial results, and proactively researching cost saving and value added opportunities for Nucor.

The Purchasing Manager will contribute to Nucor’s enterprise wide purchasing efforts and ensure appropriate internal controls and quality system procedures are maintained, documented, and continuously improved.

Safety is the most important part of all jobs within Nucor; therefore, candidates must be able to demonstrate the ability to initiate, lead, and uphold safety policies, practices, procedures, and housekeeping standards at all times.

Minimum Qualifications: • Minimum 2 years of experience in a leadership role.

• Bachelor of Science degree in Business, Finance, Data Analytics, Computer Science, or related.

• Previous experience in a purchasing related function in a manufacturing environment.

• Position will require 10% travel Detailed Selection Criteria: • Strong commitment to safety • Excellent written and verbal communication skills • Strong organizational and computer skills • Demonstrated leadership skills with a history of helping your team succeed • Ability to analyze data, think strategically and make informed decisions • Proven ability to contribute effectively in a team environment Preferences: • Proven understanding of utilizing data and development of applications to improve operations • Experience in the steel industry • Experience with contract review

Nucor is North America's largest recycler and most diversified steel and steel products company.

Since 1969, we've led the industry in developing innovative technologies for recycling scrap into high-quality steels that are all around us, from bridges and buildings to cars and appliances.

Basic Job Functions: In this role, you will be responsible for designing all aspects of our metal building systems, including structural steel, wall and roof panels, secondary members, and stability bracing.

Your duties will include, but aren’t limited to: • Creative Design: Develop safe and economical structures that fulfill project requirements while adhering to industry codes and standards.

Each project is unique! • Technical Analysis: Utilize our proprietary software for frame, secondary, bracing, crane, mezzanine, and panel analysis to ensure structural integrity and performance.

• Collaborative Approach: Work closely with the Detailing Department and other team members to communicate design requirements effectively and ensure seamless project execution.

• Oversight: Review and check structural drawings for accuracy.

• Continuous Learning: Embrace opportunities to grow and develop as an engineer, collaborating with various teams throughout the division to find innovative solutions and explore unique career paths within our organization.

You can be an engineer anywhere, so why choose Nucor? • Unique Projects: Each project presents a new challenge, offering you the opportunity to design a wide range of structures and expand your skills.

• Comprehensive Design: Design for the entire building, from the base plate up, giving you a holistic understanding of the construction process.

• On-Site Fabrication Shop: For many of our divisions, the fabrication shop is conveniently located on-site, allowing you to see your designs come to life and ensuring quality control throughout the manufacturing process.

• Team Collaboration: Enjoy working with talented teammates from various departments, fostering a collaborative environment where ideas are shared, and creativity thrives.

• Professional Development: Explore different departments and roles through crosstraining opportunities, empowering you to grow and excel in your career as an engineer.

Safety is the most important part of all jobs within Nucor; therefore, candidates must be able to demonstrate the ability to initiate, lead, and uphold safety policies, practices, procedures, and housekeeping standards at all times.

Minimum Requirements: • Bachelor of Science in Civil Engineering/Architectural Engineering from an ABET Accredited school.

• Proficient verbal and written communication in the English language.

• Strong knowledge of structural building codes: IBC, AISC 360, AISC 341, AISC 358, ASCE7, AISI, etc.

• Professional Engineer (P.E.) registration in the United States with the ability to be licensed in other states as needed.

• Candidates must be legally authorized to wwork in the US (Nucor will not sponsor the need for a visa now or in the future) Preferred Qualifications: • A background in Engineering in the Pre-Engineered Metal Building Industry.

• Proficiency with some type of metal building design software package.

About Us: Nucor Buildings Group (NBG), a proud Nucor product group, is one of North America’s largest and most experienced manufacturers of metal building systems.

With multiple locations throughout the United States, NBG is proud to design world-class building solutions tailored to meet the needs of any market including commercial, industrial, agricultural, and institutional.

Our brands include American Buildings, CBC Steel Buildings, Kirby Building Systems, and Nucor Building Systems.

NBG offers work/life balance and a variety of benefits and performance incentives.

We take pride in connecting teammates to meaningful work and focus heavily on both personal and professional development.

Whether your background is in engineering and design, information technology and software development, marketing, or sales, with Nucor Buildings Group you can go as far as your drive and ambition will take you.

Why Nucor? When you join Nucor, America’s largest steel manufacturer and recycler, you’ll help create a variety of steel products that become so much more, for so many people.

And you won’t do it alone.

Our supportive culture builds each other up, values family, relationships, and puts safety above anything else.

With the freedom to take your ideas to the next level, there’s no end to what you can achieve.

This is your chance to build a lifelong career, give back to your community, make the world a better place – and BE PART OF SOMETHING BIGGER.

Job Security – Benefits – Bonus Programs
- No Layoff Practice With performance-based compensation, profit sharing, and a no-layoff practice, we take care of our teammates who design, engineer, fabricate, and support the products that define our company.

Join us in driving success and shaping the future of our division.

Apply now and become an integral part of our team!

Nucor is North America's largest recycler and most diversified steel and steel products company.

Since 1969, we've led the industry in developing innovative technologies for recycling scrap into high-quality steels that are all around us, from bridges and buildings to cars and appliances.

Basic Job Functions: Safety is the most important part of all jobs within Nucor; therefore, candidates must be able to demonstrate the ability to initiate, lead, and uphold safety policies, practices, procedures, and housekeeping standards at all times.

1.

Properly follow company and OSHA safety procedures.

Attend safety meetings and participate in safety program.

2.

Operate heavy equipment of various sizes including cranes and loaders, etc.

3.

Duties include, but are not limited to: unloading scrap material, pushing shred pile up, moving material throughout the yard, and/or loading trucks etc.

4.

Perform daily inspections on equipment reporting any defects or needed repairs to supervisor.

5.

Keep grounds clear of debris while maintaining safety standards.

6.

Operate small equipment such as a forklift or skid steer if needed.

7.

General labor duties that may include but not limited to sweeping, shoveling and general clean-up of any area and/or equipment throughout the yard.

8.

Effectively communicate over radio with teammates for traffic coordination, production, and safety procedures.

9.

Willing to cross-train in other positions and assist other employees as needed.

10.

Other duties as assigned by your manager.

Minimum Qualifications: 1.

Experience using front-end loader, excavator or scrap handler in an Industrial/Outdoor Work Environment.

2.

2 years knowledge of heavy-equipment operating principles 3.

Ability to operate equipment under varying working conditions.

4.

Ability to understand and carry out written and oral instructions 5.

Ability to meet attendance schedule with dependability and consistency 6.

Must be a willing to be a team player 7.

Working knowledge of hazards and safety precautions common to heavy equipment operations.

8.

5-day work week.

Mon-Fri 7:50am
- 4:30pm, Saturdays as needed.

Preferred Qualifications: 1.

Flexible to work overtime, off-hours, weekends, and holidays in an industrial environment which includes being outdoors in all weather conditions 2.

Mechanical background/knowledge is a plus.

Detailed Selection Criteria: Complete work history is required to be considered for this position.

Include the employer's name, dates of employment, job title and the detailed responsibilities for the position held.

Any gap in work history must be reflected and include the dates.

Nucor is North America's largest recycler and most diversified steel and steel products company.

Since 1969, we've led the industry in developing innovative technologies for recycling scrap into high-quality steels that are all around us, from bridges and buildings to cars and appliances.

Basic Job Functions: Safety is the most important part of all jobs within Nucor; therefore, candidates must be able to demonstrate the ability to initiate, lead, and uphold safety policies, practices, procedures, and housekeeping standards at all times.

Follow company and OSHA safety procedures Attend safety meetings and participate in safety program Maintain industrial machinery and equipment- daily inspections, reporting defects or needed repairs to supervisor Moves, assembles, installs, or dismantles machinery Operate forklift and skid steer, manlift mobile crane, and overhead hoist Change bearings, motors, gearboxes, conveyor belts, sprockets, drive chains, and hydraulic hoses.

Minor welding and fabricating Visual inspection of equipment, identifying repairs and assist with repairs General labor duties that may include but not limited to sweeping, shoveling and general clean-up of any area and/or equipment throughout the yard Effectively communicate over radio with teammates for traffic coordination, production, and safety procedures Willing to cross-train and assist other teammates as needed.

Other duties as assigned by your manager.

Minimum Requirements: High school diploma or GED required 2 years maintenance experience basic torching and welding skills Strong written and verbal communication skills.

Strong organizational skills with attention to details.

Excellent customer service skills, ability to be flexible and display a positive attitude in a fast-paced environment.

Willing to work Monday to Friday 3:30pm – 12:00am and Saturdays as required Willing to work outside in all weather conditions Basic math and computer skills Must wear all necessary PPE while working or while in the yard.

Willing to learn, be adaptable and be self-motivated.

Preferences: 1.

Hydraulic systems experience and interpreting diagrams/blueprints or willingness to learn these skills.

2.

Bilingual preferred- Spanish Complete work history is required to be considered for this position.

Include the employer's name, dates of employment, job title and the detailed responsibilities for the position held.

Any gap in work history must be reflected and include the dates.

Nucor is North America's largest recycler and most diversified steel and steel products company.

Since 1969, we've led the industry in developing innovative technologies for recycling scrap into high-quality steels that are all around us, from bridges and buildings to cars and appliances.

Basic Job Functions: This position includes but is not limited to: • The successful candidate will possess a working knowledge of electrical principles and practical experience as it relates to the electrical maintenance function.

• The technician will provide electrical support to the production crews, maintain, troubleshoot, and repair electrical and automation systems.

• The qualified candidate must be willing to work rotating shifts, including nights, weekends, vacation coverage, and holidays.

Safety is the most important part of all jobs within Nucor; therefore, candidates must be able to demonstrate the ability to initiate, lead, and uphold safety policies, practices, procedures, and housekeeping standards at all times.

Safety is the most important part of all jobs within Nucor; therefore, candidates must be able to demonstrate the ability to initiate, lead, and uphold safety policies, practices, procedures, and housekeeping standards at all times.

Minimum Requirements: Two-year degree, successful completion of electrical trade school, or a minimum of three years industrial experience or military.

Detailed Selection Criteria: • Communication Skills
- The ability to communicate information and ideas so others will understand.

• Initiative
- Willingness to take on responsibilities and challenges.

• Problem Solving & Judgement/Decision Making
- Identifying problems and analyzing or reviewing related information to develop and evaluate options and implement solutions.

• Teamwork
- Working as part of a coordinated effort with others to achieve a common goal.

• Engineering and Technology
- Knowledge of the practical application of engineering science and technology.

This includes applying principles, techniques, procedures, and equipment to work at hand.

• Dependability-Being reliable, responsible, and dependable, and committed to fulfilling obligations.

Preferences: • NFPA 70E training and applied experience • Knowledge of automation and networking equipment and processes such as PID/closed loop control systems, networking tools and standards, Variable Frequency Drive experience (ABB, AB), and HMI programming and troubleshooting • Overhead crane knowledge and repair experience • Basis pneumatic and hydraulic system knowledge

Nucor is North America's largest recycler and most diversified steel and steel products company.

Since 1969, we've led the industry in developing innovative technologies for recycling scrap into high-quality steels that are all around us, from bridges and buildings to cars and appliances.

Basic Job Functions: Safety is the most important part of all jobs within Nucor; therefore, candidates must be able to demonstrate the ability to initiate, lead, and uphold safety policies, practices, procedures, and housekeeping standards at all times.

Properly follow company and OSHA safety procedures.

Attend safety meetings and participate in safety program.

Operate heavy equipment of various sizes including cranes and loaders, etc.

Duties include, but are not limited to: loading scrap material onto shredder feed conveyor, pushing shred pile up, moving material throughout the yard, and/or loading trucks and railcars, etc.

Perform daily inspections on equipment reporting any defects or needed repairs to supervisor.

Keep grounds clear of debris while maintaining safety standards.

Ability to lift up to 50 pounds Operate small equipment such as a forklift or skid steer if needed.

General labor duties that may include but not limited to sweeping, shoveling and general clean-up of any area and/or equipment throughout the yard.

Effectively communicate over radio with teammates for traffic coordination, production, and safety procedures.

Willing to cross-train in other positions and assist other employees as needed.

Other duties as assigned by your manager.

Minimum Qualifications: Ability to work in a fast-paced, non-stop environment while providing excellent customer service.

Minimum of 3-years previous heavy equipment operation in manufacturing environments, preferably in the scrap metal or construction industries.

Knowledge of heavy equipment operating principles, hazards and safety precautions as well as mechanical ability.

Ability to understand and carry out written and oral instructions.

Ability to adapt to frequent changes of priority and complete job tasks safely and effectively without constant supervision.

Ability to lift up to 50 pounds Ability to meet attendance schedule with dependability and consistency.

Flexible to work overtime, off-hours, weekends, and holidays in an industrial environment which includes being outdoors in all weather conditions.

Preferred Qualifications: Bilingual preferred
- Spanish.

Nucor is North America's largest recycler and most diversified steel and steel products company.

Since 1969, we've led the industry in developing innovative technologies for recycling scrap into high-quality steels that are all around us, from bridges and buildings to cars and appliances.

Basic Job Functions: The Nucor Engineered Bar Group is seeking applicants for a District Sales Manager.

The role of the District Sales Manager consists of but is not limited to: providing industry leading service, prospecting for new business, operating as a liaison between customers and Nucor operations, forecasting, and proactive problem solving to help the team achieve revenue, shipment, and profitably goals.

This position will require extensive travel and will represent our Cold Finish Group, SBQ mills, and Wire Products Group.

Successful candidate will be located in either greater St.

Louis, MO or greater Milwaukee, WI region.

Safety is the most important part of all jobs within Nucor; therefore, candidates must be able to demonstrate the ability to initiate, lead, and uphold safety policies, practices, procedures, and housekeeping standards at all times.

Minimum Qualifications: Minimum of 2 years of experience in sales-related field including experience with customer service, resolving customer concerns, and overall customer satisfaction Must live in or be willing to relocate within the territory Willingness to travel overnight extensively and live in the territory Detailed Selection Criteria: Safety-Oriented: Strong commitment to Safety in all job aspects.

Communication: Strong verbal and written communication skills.

Demonstrates strong ability to listen and effectively communicate the Nucor Engineered Bar Group Strategy to teammates and to our customers.

Growth Oriented: Outstanding abilities in negotiation and relationship building with customers to promote growth for the Nucor Engineered Bar Group.

Initiative: Proactively seeks out and recognizes work that needs to be done, opportunities for improvement, and is willing to take on responsibility and challenges.

Fosters Teamwork: Demonstrates strong ability to contribute to the team and engage in a collaborative work environment that promotes innovation and synergy.

Problem Solving and Decision Making: Identifies problems and opportunities, effectively analyzes related information to decide on the best path forward.

Efficiency: Excellent time-management and organizational skills.

Technology: Proficient in utilizing computer and IT resources for the purposes of managing the territory and providing pertinent customer information for the Nucor Engineered Bar Group.

Preferred Qualifications: Sales or leadership experience in steel or related industry Outside steel sales experience, preferably within Cold Finish, SBQ, or Wire Products 4 year college degree in business/marketing or field related to the steel business

Nucor is North America's largest recycler and most diversified steel and steel products company.

Since 1969, we've led the industry in developing innovative technologies for recycling scrap into high-quality steels that are all around us, from bridges and buildings to cars and appliances.

Short Description Detail commercial and civil projects as it pertains to the supply and installation of rebar.

Basic Job Functions: Must adhere to Nucor Rebar Fabrication’s safety programs and standards.

Demonstrate conduct consistent with Nucor Rebar Fabrication’s vision and values.

Continue developing knowledge of industry reference material (i.e.

CRSI and ACI manuals).

Verify drawings, dates, specifications, addenda and other contractual information from the routing sheet or directly from the business system.

Working with supervision, begin detailing more complex projects (i.e.

jobs with columns, beams, one- and two-way slabs, and grade beams).

Bring any change(s) made to the contract documents to the attention of your supervisor (i.e.

change made of the approval drawings, changes made by the field or yourself).

Detail accessories, mesh, couplers and dowel bars and prepare material lists as required.

Work with job site personnel to determine project requirements for detailing and delivery of material.

Work with A/E regarding problems or questions on contract documents.

Produce the material list for all products from RebarCAD and produce replacement orders as required.

Enter all drawings for submission into the drawing tracking system.

Perform other duties as required by your supervisor.

Safety is the most important part of all jobs within Nucor; therefore, candidates must be able to demonstrate the ability to initiate, lead, and uphold safety policies, practices, procedures, and housekeeping standards at all times.

Minimum Requirements: Must be legally authorized to work in the United States without company sponsorship now or in the future Vocational certificate in CAD design/drafting issued from an accredited school or college, or equivalent combination of training and work experience At least one year of experience detailing rebar using a CAD based detailing system Preferences: Two-year technical degree from an accredited school or college Construction and concrete related construction knowledge and experience Working knowledge of industry reference material (i.e.

CRSI and ACI) Physical Demands: Typical office activities Walking, sitting, standing, bending Using hands to operate objects, tools, computers and other electronic equipment Lifting/handling computers and related equipment Vision abilities including close vision and adjusting focus Moderate noise level Special Demands: Must be able to work overtime when required May be asked to complete approximately two hours of assessments as part of the hiring process

Nucor is North America's largest recycler and most diversified steel and steel products company.

Since 1969, we've led the industry in developing innovative technologies for recycling scrap into high-quality steels that are all around us, from bridges and buildings to cars and appliances.

Purpose Hours: 10pm
- 7:30am Bend, cut, bundle and load reinforcing steel bars in accordance with customer’s orders Basic Job Functions: Must adhere to Nucor's safety programs and standards.

Demonstrate conduct consistent with Nucor’s vision and values.

Unload trailers and store material in storage bins.

Operate a shearing machine to cut reinforcing steel bars to specific lengths.

Operate a bending machine to bend reinforcing steel bars to specified shape.

Operate overhead crane to move, assemble and select material to be fabricated or shipped.

Operate Fabmatic machine that cuts and bends reinforcing steel bars to specified shapes.

Assemble and load orders onto trailers for shipping.

Operate power saw for cutting reinforcing steel bars to specified lengths.

Operate a spray gun in the application of epoxy touch up or reinforcing steel bars.

Maintain the shop or designated area in a clean and safe manner.

Assist other employees in any of the above tasks.

Safety is the most important part of all jobs within Nucor; therefore, candidates must be able to demonstrate the ability to initiate, lead, and uphold safety policies, practices, procedures, and housekeeping standards at all times.

Minimum Qualifications: Must be legally authorized to work in the United States without company sponsorship now or in the future Must have a high school diploma, GED or local/state equivalent Physical Demands Some heavy lifting may be necessary Working conditions can be noisy/ dusty/ hot/ cold Special Demands Due to the operating conditions of the position, this is a safety sensitive position Must be able to work overtime when required Must be able to work any shift