N Able Take Control Jobs in Usa

• 
  
• Initiates design documents for small projects and in support of large programs
  
• Develops design documents narratives
  
• Performs requirements analysis
  
• Develops Sequence of Operations / System Functional Documentation
  
• Create Subsystem Designs (CAD / Panels / Layouts / Wiring / SCADA Screens / Hardware / Communications)
  
• Develops Specifications
  
• Performs QA/QC and technical reviews of designs
  
• Plans and Design Procedures and Equipment for Integrated Systems Factory Testing
  
• Comment Resolution
  

Mechanical-focused controls engineer (BAS/BMS)

• 
  
• Experience on EPMS monitoring
  
• Certifications in Platforms (at least one), familiarity with any others preferred: Ignition, Aveva, Automated Logic, Siemens, Schneider EBO, Niagara N4, Iconics Gen64
  
• Experience with Federal Government controls projects (ICS/EMCS/UMCS) preferred
  
• Familiarity with Cisco network switch programming and design preferred
  

• 
  
• Lead programming / configuration team efforts for complex automation and SCADA applications.
  
• Program / Configure / troubleshoot PLCs, RTUs, and/or HMI systems
  
• Testing / Troubleshooting / Deployment / Commissioning
  
• Author testing / commissioning procedures
  
• Preparation of test reports
  
• Originates test procedures
  
• Commissioning of deployed systems
  
• Development of test equipment and simulation devices
  
• Perform Factory and Field Testing
  

• 
  
• Perform troubleshooting on service calls to existing and legacy system operators
  
• Perform hardware / software upgrades and replacements on existing systems
  

• 
  
• Conducts any surveys, inspections, tours, etc. of client sites, as required
  
• Prepares cost estimates and supporting documents for small projects
  
• Perform hardware / software upgrades and replacements on existing systems
  
• Evaluation and pricing of change orders
  

• 
  
• Assigns technical tasks and coordinates with entry-level engineers
  
• Assigns tasks and coordinates with Technical Staff
  

• 
  
• Experience in reading electrical and control schematics and plans
  
• Experience in control system startup, configuration, and calibration
  
• Experience in testing and troubleshooting control systems
  
• Experience using basic electrical and machinist hand tools
  
• Experience using testing, calibration, or industry-specific tools and software
  
• 3-7 years' experience
  
• Bachelor's degree in engineering or higher
  
• Associate degree (add 3 years)
  
• High school diploma (add 5 years)
  
• Must be a US Citizen
  

• 
  
• Experience in computer networks
  
• Experience in CAD/CAE Software (Visio, AutoCAD)
  
• Experience in schedule management software
  
• Standard Office Software (Microsoft Word, Excel, etc.)
  

• 
  
• Certification in one or more PLC / Automation Platform, such as: Niagara N4, Schneider, Rockwell, Siemens, etc.
  
• Certification in one or more SCADA platform, such as: Iconics, Ignition, etc.
  

• 
  
• Certification in one or more PLC / Automation Platform, such as: Niagara N4, Schneider, Rockwell, Siemens, etc.
  
• Certification in one or more SCADA platform, such as: Iconics, Ignition, etc.
  
• Design Build Institute of America (DBIA)
  
• Engineer in Training (EIT) in relevant in field
  

• 
  
• While performing the duties of this job, the employee is regularly exposed to computer screens for an extended period of time; Sitting for extended periods of time; Reach by extending hands or arms in any direction; Have finger dexterity in order to manipulate objects with fingers rather than whole hands or arms, for example, using a keyboard; Listen to and understand information and ideas presented through spoken words and sentences; Communicate information and ideas in speaking so others will understand; Read and understand information and ideas presented in writing; Apply general rules to specific problems to produce answers that make sense; Identify and understand the speech of another person.
  

• 
  
• Design / Engineering
  
  • 
    
  • Assists Senior Engineers in design documents for SCADA/Automation projects
    
    • 
      
    • Developing design document narratives
      
    • Perform requirements analysis
      
    • Understanding of Sequence of Operations (SOO) / System Functional Documentation
      
    • Create Subsystem Designs (CAD / Panels / Layouts / Wiring / SCADA Screens / Hardware / Communications)
      
    • Comment Resolution
      
    
    
    
  • Reviews and comments on 3rd party design documents for SCADA/Automation projects in support of large programs/projects
    
    • 
      
    • Review design document narratives
      
    • Perform execution and design scope gap analysis
      
    • Review Sequence of Operations / System Functional Documentation to ensure compliance with project requirements
      
    • Review Subsystem Designs (CAD / Panels / Layouts / Wiring / SCADA Screens / Hardware / Communications) for project compliance
      
    • Assist in reviewing project specifications
      
    • Assist in creation of testing plans and procedures for Integrated Systems Factory Testing
      
    
    
    
  
  
  
• Programming
  
  • 
    
  • Program / configure / troubleshoot Controllers, PLCs, RTUs, and/or HMI systems
    
  
  
  
• Testing / Troubleshooting / Deployment / Commissioning
  
  • 
    
  • Assist senior engineers in creating and updating testing and commissioning procedures
    
  • Preparation of test reports
    
  • Originates test procedures
    
  • Commissioning of deployed systems
    
  • Development of test equipment and simulation devices
    
  • Perform Factory and Field Testing
    
  
  
  
• Maintenance
  
  • 
    
  • Perform troubleshooting on service calls to existing and legacy system operators
    
  • Perform hardware / software upgrades and replacements on existing systems
    
  
  
  

• 
  
• Estimates
  
  • 
    
  • Assists senior engineers in preparation of cost estimates and supporting documentation
    
  • Work with relevant stakeholders to review scope of project
    
  • Conduct any surveys, inspections, tours, etc. of client sites, as required
    
  • Assists senior engineers in evaluation and pricing of change orders from vendors
    
  
  
  
• Personnel Management
  
  • 
    
  • Assigns tasks and coordinates with Technical Staff
    
  • Provides technical direction and on-the-job training to drafters, engineering technicians, and less experienced engineers.
    
  
  
  

• 
  
• Bachelor degree in electrical or mechanical engineering and 2-5 years field experience
  
• Associate degree in the electrical or mechanical field (add 3 years field experience)
  
• High school diploma (add 5 years field experience)
  
• 2-5 years' experience with designing and servicing controls systems for switchgear, substations, metering and SCADA/Fault Data/SER/Integration-Automation equipment installation and testing
  
• Experience in reading electrical and control schematics
  
• Experience in electrical power monitoring systems (EPMS) startup, configuration, and calibration
  
• Experience in testing and troubleshooting control and protection systems
  
• Experience using basic electrical and hand tools
  
• Experience using testing, calibration, or industry-specific tools and software
  
• Experience testing, reading/verifying all voltage and current inputs to relays; verifying all metering (local and SCADA); calibrating all relays; trip testing (local and SCADA); verifying all alarms (local and SCADA); verifying all alarms (local and SCADA); verifying all function switches, etc.
  
• Experience with 3 phase power systems; power system protection & control schemes; test equipment; test equipment software
  
• MUST BE A US CITIZEN
  

• 
  
• Experience in OT and IT networking technologies and topologies
  
• Experience troubleshooting and diagnosing OT and IT networks and protocols
  
• Experience in CAD/CAE Software (Visio, AutoCAD)
  
• Experience in schedule management software (Project, Primavera P6)
  
• Standard Office Software (Microsoft Word, Excel, Access etc.)
  

• 
  
• Required Certifications
  
  • 
    
  • Certification in one or more PLC / Automation Platform, such as: Niagara N4, Schneider Power Monitoring, Rockwell, Siemens, JCI, Eaton Foreseer, etc.
    
  • Certification in one or more SCADA platforms, such as: Iconics, Ignition, Aveva, etc.
    
  
  
  
• Preferred Licenses / Certifications
  
  • 
    
  • Design Build Institute of America (DBIA)
    
  • Certified SCADA Security Architect (CSSA)
    
  • Certified Automation Professional (CAP)
    
  
  
  

• 
  
• While performing the duties of this job, the employee is regularly exposed to computer screens for an extended period of time; Sitting for extended periods of time; Reach by extending hands or arms in any direction; Have finger dexterity in order to manipulate objects with fingers rather than whole hands or arms, for example, using a keyboard; Listen to and understand information and ideas presented through spoken words and sentences; Communicate information and ideas in speaking so others will understand; Read and understand information and ideas presented in writing; Apply general rules to specific problems to produce answers that make sense; Identify and understand the speech of another person.
  

Client Notes: 3rd shift

Job Description

Primary Purpose: The Maintenance Technician plays a critical, hands-on role in supporting plant uptime and performance. This position is 100% floor-based, directly responding to equipment breakdowns, performing preventive maintenance, and assisting with project-related tasks. A core responsibility of this role is to troubleshoot Mechanical, Electrical and PLC based control system issues in real time to minimize downtime and support efficient operations. The ideal candidate is a strong problem solver, highly responsive, and thrives in a fast-paced manufacturing environment

Primary Duties & Responsibilities

Real-Time Equipment Support & Troubleshooting

• Immediately respond to breakdowns and perform on-the-spot repairs to restore production.
• Troubleshoot electrical, mechanical, pneumatic, and hydraulic systems, including PLC I/O and instrumentation.
• Collaborate with operators to identify and resolve root causes of equipment malfunctions.
• Support line changeovers and production start-ups.

PLC and Electrical Control Support

• Diagnose and repair PLCs, HMIs, VFDs, and control-related issues.
• Troubleshoot systems using tools such as Allen-Bradley RSLogix 5000.
• Assist with equipment upgrades, installations, and control panel builds.
• Run conduit, pull wire, and terminate Ethernet and communication cabling.

Preventive Maintenance and Continuous Improvement

• Perform scheduled preventive maintenance with focus on reliability and efficiency.
• Take ownership of specific PM areas and proactively improve them.
• Accurately document all maintenance activities in the CMMS.
• Identify recurring issues and propose long-term corrective actions.

Project and Fabrication Work

• Assist in machinery installation and facility improvement projects.
• Perform light fabrication and welding for safety and efficiency-related improvements.

Safety & Communication

• Always follow safety protocols and use proper PPE.
• Keep work areas clean, organized, and free from hazards.
• Attend and contribute to daily shift meetings and status updates.

Key Attributes & Abilities

• Strong problem-solving and troubleshooting skills.
• Ability to work under pressure and make fast, informed decisions.
• Good communication and team collaboration abilities.
• High personal accountability, attention to detail, and reliability.
• Open-minded and eager to learn new systems and technologies.
• Willing to work 8- or 12-hour shifts depending on business demands, with overtime as needed.

Qualifications & Experience

• High school diploma or equivalent required; technical certifications or trade school training preferred.
• Minimum 4 years of industrial maintenance experience, preferably in a manufacturing environment.
• Demonstrated experience with PLC troubleshooting and industrial electrical systems.
• Working knowledge of RS Logix 5000 or similar programming environments preferred.
• Ability to interpret electrical, hydraulic, pneumatic, and mechanical schematics.
• Basic welding and fabrication skills.
• Understanding of Lean principles, 5S, and Root Cause Analysis is a plus.
• Familiarity with CMMS platforms for logging repairs, PMs, and work orders; ability to navigate and input data accurately.

Physical Requirements

• Must be able to remain on the factory floor for long periods of time, potentially a full shift
• Ability to lift, push, pull, or carry up to 50 lbs.
• Ability to crouch, bend, kneel, squat, twist, reach, and stand for extended periods
• Ability to perform equipment maintenance tasks requiring full-body movement and sustained physical effort
• Requires full range of motion in arms, hands, and fingers to reach, grasp, hold, push, pull, twist, and use tools
• Must be able to climb and work on ladders
• Ability to stay alert and react quickly to plant conditions
• Schedule may require 40+ hours per week to support manufacturing production.
• Compensation

GEICO is seeking a visionary and strategic HR 1st Line of Defense Control/Risk Director to drive risk management and controls across our Human Resources (HR) functions. This high-impact role is designed for an initiative-taking leader who excels in partnership, thrives in collaborative environments, and brings a strong action-oriented approach. The ideal candidate will champion a process mindsetidentifying enhancement and re-engineering opportunities and leveraging AI and automation to deliver efficiency and effectiveness in key HR activities. Most importantly, this leader will demonstrate a \"can do\" mentality, focused on \"getting to yes\" and breaking down barriers to achieve solutions that align with both risk management objectives and business priorities.

This hybrid role requires on-site presence three days per week at one of GEICO's office locations: Chevy Chase, MD; Chicago, IL; Dallas, TX; or New York, NY.

• Strategic Partnership: Build and nurture strong relationships across HR, business units, and Technology functions to seamlessly integrate risk management into HR initiatives.
• Risk-Based Approach: Understand and prioritize business needs, applying a risk-based mindset to HR processes and controls.
• Process Mindset & Innovation: Advocate for process improvement, actively seeking opportunities for enhancement, re-engineering, and leveraging AI or automation to maximize efficiency and effectiveness.
• Can Do Mentality & Getting to Yes: Approach challenges with optimism, persistence, and resourcefulnessalways striving to find practical solutions and drive consensus that aligns business objectives with risk mitigation.
• Continuous Improvement: Deliver ongoing transformation within HR controls, supporting business growth and compliance through innovative process changes.
• Governance and Compliance: Develop, implement, and maintain policies and procedures that fulfill regulatory requirements and uphold internal standards.
• Team Leadership: Build, guide, and empower a collaborative team focused on designing, monitoring, and remediating HR controls.
• Stakeholder Communication: Clearly and effectively communicate risk events, issues, and process updates to HR leadership, the Audit Committee, and external auditors.
• Training and Awareness: Lead educational sessions for HR staff on risk management, controls, and compliance.

• Bachelor's degree in human resources, business, finance, or a related field; or equivalent relevant experience.
• 8+ years of experience in risk management, internal controls, or compliance, preferably within HR or large, complex organizations.
• Demonstrated partnership and collaboration skills, with the ability to influence stakeholders across diverse functions.
• Initiative-taking, action-oriented mindset with a focus on results and continuous improvement.
• Process-driven, with the ability to propose and implement enhancement opportunities, including re-engineering and AI/automation.
• Excellent written and verbal communication skills, with the ability to distill and present complex issues clearly.
• Strong prioritization skills for thriving in fast-paced, changing environments.

• Master's degree in HR, business, or finance (HR certifications or risk management credentials are a plus).
• Experience with data analysis, process automation, or HR analytics.
• Background in SOX compliance, forensic audit, or control design relating to HR.

This is an exceptional opportunity to join GEICO during a period of transformationleading impactful change in HR risk management, promoting a culture of \"getting to yes,\" and helping shape the future of our organization.

Annual Salary $146,575.00 - $229,600.00. The above annual salary range is a general guideline. Multiple factors are taken into consideration to arrive at the final hourly rate/annual salary to be offered to the selected candidate. Factors include, but are not limited to, the scope and responsibilities of the role, the selected candidate's work experience, education and training, the work location as well as market and business considerations.

At this time, GEICO will not sponsor a new applicant for employment authorization for this position.

The GEICO Pledge:

Great Company: At GEICO, we help our customers through life's twists and turns. Our mission is to protect people when they need it most and we're constantly evolving to stay ahead of their needs.

We're an iconic brand that thrives on innovation, exceeding our customers' expectations and enabling our collective success. From day one, you'll take on exciting challenges that help you grow and collaborate with dynamic teams who want to make a positive impact on people's lives.

Great Careers: We offer a career where you can learn, grow, and thrive through personalized development programs, created with your career and your potential in mind. You'll have access to industry leading training, certification assistance, career mentorship and coaching with supportive leaders at all levels.

Great Culture: We foster an inclusive culture of shared success, rooted in integrity, a bias for action and a winning mindset. Grounded by our core values, we have an established culture of caring, inclusion, and belonging, that values different perspectives. Our teams are led by dynamic, multi-faceted teams led by supportive leaders, driven by performance excellence and unified under a shared purpose.

As part of our culture, we also offer employee engagement and recognition programs that reward the positive impact our work makes on the lives of our customers.

Great Rewards: We offer compensation and benefits built to enhance your physical well-being, mental and emotional health and financial future.

• Comprehensive Total Rewards program that offers personalized coverage tailor-made for you and your family's overall well-being.
• Financial benefits including market-competitive compensation; a 401K savings plan vested from day one that offers a 6% match; performance and recognition-based incentives; and tuition assistance.
• Access to additional benefits like mental healthcare as well as fertility and adoption assistance.
• Supports flexibility- We provide workplace flexibility as well as our GEICO Flex program, which offers the ability to work from anywhere in the US for up to four weeks per year.

The equal employment opportunity policy of the GEICO Companies provides for a fair and equal employment opportunity for all associates and job applicants regardless of race, color, religious creed, national origin, ancestry, age, gender, pregnancy, sexual orientation, gender identity, marital status, familial status, disability or genetic information, in compliance with applicable federal, state and local law. GEICO hires and promotes individuals solely on the basis of their qualifications for the job to be filled.

GEICO reasonably accommodates qualified individuals with disabilities to enable them to receive equal employment opportunity and/or perform the essential functions of the job, unless the accommodation would impose an undue hardship to the Company. This applies to all applicants and associates. GEICO also provides a work environment in which each associate is able to be productive and work to the best of their ability. We do not condone or tolerate an atmosphere of intimidation or harassment. We expect and require the cooperation of all associates in maintaining an atmosphere free from discrimination and harassment with mutual respect by and for all associates and applicants.

Job Description:

Supports the design and implementation of controls-based solutions for novel future processing equipment, specifically fiber making and cable process equipment, in the optical waveguide and cabling manufacturing processes. These controls solutions will enable manufacturing systems to deliver and transform raw materials to product, convey ware between discrete processing steps, and/or measure and characterize ware created and/or processed by these novel manufacturing methods.

Day to Day Responsibilities:

· Integrate field devices for flow control, material handling and metering, motion control, temperature control, and associated safety systems based the system design package enabling a fully functional equipment platform.

· Work closely with controls engineers to implement control sequence logic (both time-based and event-based), fail-safe states, and process /equipment recovery sequences.

· Implement specified field devices to accomplish desired process / equipment functions, and compatible / compliant with site standards.

· Accurately estimate timeframe to complete assigned project work once scope of work is adequately defined and then complete work to agreed-to timeline.

· Participate in engineering project teams that are responsible to deliver robust, cost-effective automation and process machine systems to Company's manufacturing plants and processes.

· Work within project teams to support the solving of difficult automation problems, resolution of project related issues, and development of fundamental understanding of technical / process requirements critical to system success.

· Drive the deployment of defined control architectures, control system standards, and system integration that will satisfy process and manufacturing requirements.

· Interface with external system integrators and machine builders to enable project deliverables.

· Actively participate in project fabrication, off-line integration and testing, drawings and documentation, installation, production start-up support, training of plant personnel, and technology transfer.

· Report to project leader on assigned project activities on a pre-determined basis.

Required Education: * Two-year technical degree

Required Years and Area of Experience: * 3+ years equipment/controls experience

Required Skills:

· Experience integrating field devices for flow control, material handling and metering, motion control, temperature control, and associated safety systems into an overall controls package enabling a fully functional equipment platform.

· Experience with PID control loop tuning and techniques.

· Experience working closely with IT & process engineers to implement control sequence logic (both time-based and event-based), fail-safe states and process / equipment recovery sequences.

· Experience with graphical user interface and human machine interface.

· Experience working within engineering project teams.

· Accurately estimates timeframe to complete assigned project work, once scope of work is adequately defined, then completes work to agreed-to timeline.

· Understanding of electrical design practices, machine / motion control systems, electro-mechanical systems, robotics, programming, and system integration.

· Demonstrated ability to support the development and delivery of fully integrated machine and motion control, automation, and process machine systems and solutions within a manufacturing environment.

· Familiar with state-of-the-art technologies in the following areas: control systems integration, controls architectures, PLC's, motion control systems, electro-mechanical drive systems, robotics, part sensing, vision, risk assessment, and safety systems.

· Ability to work in a team-based environment and lead or participate on a highly matrixed team.

· Possesses an understanding of general mechanics and ability to apply that understanding during troubleshooting and system implementation.

· Sound problem solving and decision-making skills.

· Highly motivated, results oriented, customer focused, with a high commitment level.

· Must be able to program in ladder logic or equivalent.

· Experienced in the checkout and verification of electrical control panels.

Desired Skills:

· Experience preferred with Allen-Bradley, Beckhoff, LabVIEW, Safety PLCs, iFIX SCADA.

· Manufacturing experience and ability to work in a manufacturing environment.

· Computer vision system experience.

· Experience with programming manufacturing systems using higher level programming languages: o C++ or C# o VB or VB.Net

· Robot programming skills.

· Sound knowledge of the rules and regulation relating to implementation and best practices in electrical system design and implementation: o National Electric Code o NFPA 79 Specification o NFPA 70e Specification o ANSI and IEC electrical symbols o Grounding and shielding of electrical systems

· Able to work with external machine builders and system integrators for build, and integration of later stages of system implementation.

Soft Skills:

· Works well in a team environment.

· Acts and makes decisions in the best interest of project team.

· Complies with all policies and procedures of project team.

· Strong written and verbal communications and overall people skills.

· Resolve conflicts with peers, customers, etc.

Benefits to Joining Our Team

CPG offers a competitive and comprehensive package that includes additional benefits beyond enhanced medical, dental, and vision coverage

• 
  
• Health Benefits - (Medical, Dental & Vision Insurance)
  
• Flexible Spending Account Options
  
• 401K Plan
  
• Employer paid Life & Disability Insurance
  
• Paid Time Off
  
• Employee Referral Program
  
• Employee Assistance Program (EAP)
  

CPG is an equal opportunity employer. We will consider all employment applicants without attention to age, race, color, religion, sex, sexual orientation, gender identity, national origin, veteran, or disability status.

Learn more about CPG by checking out our website here

#LI-TG1

• 
  
• Design / Engineering
  
  • 
    
  • Assists Senior Engineers in design documents for SCADA/Automation projects
    
    • 
      
    • Developing design document narratives
      
    • Perform requirements analysis
      
    • Understanding of Sequence of Operations (SOO) / System Functional Documentation
      
    • Create Subsystem Designs (CAD / Panels / Layouts / Wiring / SCADA Screens / Hardware / Communications)
      
    • Comment Resolution
      
    
    
    
  • Reviews and comments on 3rd party design documents for SCADA/Automation projects in support of large programs/projects
    
    • 
      
    • Review design document narratives
      
    • Perform execution and design scope gap analysis
      
    • Review Sequence of Operations / System Functional Documentation to ensure compliance with project requirements
      
    • Review Subsystem Designs (CAD / Panels / Layouts / Wiring / SCADA Screens / Hardware / Communications) for project compliance
      
    • Assist in reviewing project specifications
      
    • Assist in creation of testing plans and procedures for Integrated Systems Factory Testing
      
    
    
    
  
  
  
• Programming
  
  • 
    
  • Program / configure / troubleshoot Controllers, PLCs, RTUs, and/or HMI systems
    
  
  
  
• Testing / Troubleshooting / Deployment / Commissioning
  
  • 
    
  • Assist senior engineers in creating and updating testing and commissioning procedures
    
  • Preparation of test reports
    
  • Originates test procedures
    
  • Commissioning of deployed systems
    
  • Development of test equipment and simulation devices
    
  • Perform Factory and Field TestingMaintenance
    
  
  
  
• Maintenance
  
  • 
    
  • Perform troubleshooting on service calls to existing and legacy system operators
    
  • Perform hardware / software upgrades and replacements on existing systems
    
  
  
  

• 
  
• Estimates
  
  • 
    
  • Assists senior engineers in preparation of cost estimates and supporting documentation
    
  • Work with relevant stakeholders to review scope of project
    
  • Conduct any surveys, inspections, tours, etc. of client sites, as required
    
  • Assists senior engineers in evaluation and pricing of change orders from vendors
    
  
  
  
• Personnel Management
  
  • 
    
  • Assigns tasks and coordinates with Technical Staff
    
  • Provides technical direction and on-the-job training to drafters, engineering technicians, and less experienced engineers.
    
  
  
  

• 
  
• Bachelor's degree in electrical or mechanical engineering and 2-5 years field experience
  
• Associate degree in the electrical or mechanical field (add 3 years field experience)
  
• High school diploma (add 5 years field experience)
  
• 2-5 years' experience with designing and servicing controls systems for chiller plants, complex air distribution equipment, equipment installation, and testing
  
• Experience in reading mechanical and control schematics
  
• Experience in building automation systems (BAS) startup, configuration, and calibration
  
• Experience in testing and troubleshooting control systems
  
• Experience using basic electrical and hand tools
  
• Experience using testing, calibration, or industry-specific tools and software
  
• Experience testing, reading/verifying all voltage and current inputs to relays; verifying all metering (local and SCADA); calibrating all relays; trip testing (local and SCADA); verifying all alarms (local and SCADA); verifying all alarms (local and SCADA); verifying all function switches, etc.
  
• Experience with test equipment and test equipment software
  
• Experience with networking design, configuration, and troubleshooting
  
• Experience with air handlers, chiller plant systems and data center CRAC units
  
• Ability to travel up to 80%
  
• MUST BE A US CITIZEN
  

• 
  
• Experience in OT and IT networking technologies and topologies
  
• Experience troubleshooting and diagnosing OT and IT networks and protocols
  
• Experience in CAD/CAE Software (Visio, AutoCAD)
  
• Experience in schedule management software (Project, Primavera P6)
  
• Standard Office Software (Microsoft Word, Excel, Access etc.)
  

• 
  
• Required Certifications
  
  • 
    
  • Certification in one or more PLC / Automation Platform, such as: Niagara N4, Schneider, Rockwell, Siemens, JCI, ALC, Distech, etc.
    
  • Certification in one or more SCADA platforms, such as: Iconics, Ignition, Aveva, etc.
    
  
  
  
• Preferred Licenses / Certifications
  
  • 
    
  • Design Build Institute of America (DBIA)
    
  • Certified SCADA Security Architect (CSSA)
    
  • Certified Automation Professional (CAP)
    
  
  
  

• 
  
• While performing the duties of this job, the employee is regularly exposed to computer screens for an extended period of time; Sitting for extended periods of time; Reach by extending hands or arms in any direction; Have finger dexterity in order to manipulate objects with fingers rather than whole hands or arms, for example, using a keyboard; Listen to and understand information and ideas presented through spoken words and sentences; Communicate information and ideas in speaking so others will understand; Read and understand information and ideas presented in writing; Apply general rules to specific problems to produce answers that make sense; Identify and understand the speech of another person.
  

Benefits to Joining Our Team

CPG offers a competitive and comprehensive package that includes additional benefits beyond enhanced medical, dental, and vision coverage

• 
  
• Health Benefits - (Medical, Dental & Vision Insurance)
  
• Flexible Spending Account Options
  
• 401K Plan
  
• Employer paid Life & Disability Insurance
  
• Paid Time Off
  
• Employee Referral Program
  
• Employee Assistance Program (EAP)
  

CPG is an equal opportunity employer. We will consider all employment applicants without attention to age, race, color, religion, sex, sexual orientation, gender identity, national origin, veteran, or disability status.

Learn more about CPG by checking out our website here

#LI-TG1

• Inspecting output samples using industry-appropriate methods, such as comparing to standards, measuring dimensions and examining functionality.
• Responsible for audits, surveillances and inspections while also working closely with our QA department to ensure integration.
• Reviewing blueprints and specifications to compare to produced goods.
• Recording inspection results by completing reports, summarizing re-works and wastes and inputting data into quality database.
• Training the production team on quality control measures to improve product excellence.
• Proposing improvements to the production process.
• Monitoring the use of equipment to ensure it is safe and discard any that do not meet requirements.
• Updating job knowledge by engaging in educational opportunities and regular training.
• Keeping measurement equipment operating accurately by following calibration requirements and calling for repairs.
• Reading and interpreting engineering drawings and radiographs.
• Using gauges such as calipers and micrometers to measure products.
• Collecting and compiling statistical quality data.
• Assisting in the development of test methods and inspection plans.
• Determining the causes of product defects and reworks.
• Verifying all equipment is calibrated correctly.
• Additional duties as necessary.
  

• Must have at least 5 years' experience in the Quality Assurance/Control field and technical or vocational training.
• Must have a strong understanding of Government Specs.
• Must have extensive knowledge of AWS D1.1 (Structural Steel), D1.2 (Aluminum), D1.5 (Bridge Code), and D1.6 (Stainless Steel).
• Must have knowledge of NAVSEA Standards, QA. & OSHA Standards 29 CFR 1920 (Occupational Safety and Health Standards) & 1915 (Personal Protective Equipment for Shipyard Employment).
• Must have ABS code construction experience.
• Knowledge of NAVSEA Standard Items and Quality Assurance requirements
• Must have a valid Driver's license and a clean DMV record.
• Must have expert knowledge of NAVSEA 009 Standard Items.
  

• Minimal Travel; 10% or less.
  

• Must be able to lift, carry and transport heavy equipment and boxes. The exact weight requirements will be determined by the specific job, but no less than 20 lbs.
• Able to work on and climb ladders, work in extreme temperature environments, aboard ships, in shipyards, under industrial conditions and in confined spaces, including enter and moving through manholes.
• Able to perform other duties as required which may involve high heat, humidity, noise and dirty conditions.
• Frequent exposure to noise due to machinery and equipment.
• Employee is required to operate trucks, forklifts & man-lifts.
• While performing the duties of this job, you may frequently be required to stand, walk & sit; use hands or fingers; handle or feel; talk and hear. Occasionally required to reach with hands and arms, climb and balance, stoop, squat, kneel, twist and crawl.
• Work in extreme temperatures and conditions. At times you will work in areas that have less adequate ventilation
• Frequent use of respirator.
  

Company Description

Job Description

ABOUT THE JOB Right now Domino's is looking for qualified drivers to staff stores in your area. We're growing so fast it's hard to keep up, and that means Domino's has lots of ways for you to grow (if that's what you want),perhaps to management, perhaps beyond. Whether it's your hobby, main-gig, or supplemental job, apply online. We're bound to have just the thing for you. JOB REQUIREMENTS AND DUTIES You must be 18 years of age and have a valid driver's license with a safe driving record meeting company standards as well as access to an insured vehicle which can be used for delivery. You should possess navigational skills read a map, locate addresses within designated delivery area and must be able to navigate adverse terrain including multi-story buildings. SUMMARY STATEMENT We take pride in our team members and our team members take pride in Domino's Pizza! Being the best pizza delivery company in the world requires exceptional team members working together. At Domino's Pizza our people come first. GENERAL JOB DUTIES FOR ALL TEAM MEMBERS Operate all equipment Stock ingredients from delivery area to storage, work area, walk-in cooler. Prepare product. Receive and process telephone orders. Take inventory and complete associated paperwork. Clean equipment and facility approximately daily. TRAINING Orientation and training provided on the job. COMMUNICATION SKILLS Able to comprehend and give correct written instructions. Ability to communicate verbally with customers and co-workers to process orders both over the phone and in person. ESSENTIAL FUNCTIONS/SKILLS Ability to add, subtract, multiply and divide accurately and quickly (may use calculator). Must be able to make correct monetary change. Verbal, writing and telephone skills to take and process orders. Motor coordination between eyes and hands/fingers to rapidly and accurately make precise movements with speed. Ability to enter orders using a computer keyboard or touch screen. Navigational skills to read a map, locate addresses within designated delivery area. Must navigate adverse terrain including multi-story buildings, private homes, and other delivery sites while carrying product.

Qualifications

Additional Information

All your information will be kept confidential according to EEO guidelines.