Multi Phase Electrical Services Inc Jobs in Usa

Facility Location

NATIONAL EEO SVC FACILITY

5405 CYPRESS CENTER DR STE 330

TAMPA, FL 33609-1026

This is NOT a remote position.

Position Information

NON-SCHEDULED DAYS: SAT/SUN

HOURS: 08:00 AM to 05:00 PM EST

BENEFIT INFORMATION: The salary will be based on previous experience, salary history, and current Postal pay policies. We offer excellent benefits including health insurance and annual leave.

Functional Purpose

Reviews and analyzes Equal Employment Opportunity (EEO) complaint files; serves as Contracting Officer's Representative for outsourcing services.

DUTIES AND RESPONSIBILITIES

1. Assigns cases to and coordinates the activities of independent contractors who provide pre-complaint counseling and/or mediation services. Reviews reports for legal sufficiency and authority settlement agreements reached at the pre-complaint counseling stage and monitors compliance with those agreements.

2. Reviews DRS (Dispute Resolution Specialist) Inquiry Report to determine sufficiency for acceptance and dismissal. Processes formal complaints of employment discrimination and related amendments and consolidations for acceptance and dismissal through application of Equal Employment Opportunity Commission regulations and case law. Responds to appeals of final agency decisions dismissing complaints.

3. Assigns cases to and coordinates the activities of independent contractor EEO investigators. Reviews investigative plans, and draft and completed EEO investigations to ensure compliance wtih national quality standards and regulatory timelines.

4. Coordinates and reviews the work of independent contractors preparing draft final Agency decisions on the merits of EEO complaints. Issues final agency decisions on the merits of EEO complaints on behalf of the Postal Service and responds to appeals of these final agency decisions. Reviews decisions issued by EEOC Administrative Judges on the merits of EEO complaints and issues Notices of Final Action, either implementing or appealing those decisions. Assists in responding to appeals of Notices of Final Action.

5. Develops and provides EEO training to EEO service providers, Area, and District personnel. Assists in the development and delivery of training or skills development sessions for newly selected Investigative Services Office) Analysts.

6. Provides guidance and technical advice concerning the EEO complaints process and Postal Service regulations, policies, programs and procedures to independent contractors. Provides guidance concerning EEO issues to Area and District personnel.

7. Interacts as necessary with EEO Compliance and Appeals, the Law Department, postal management, EEOC District and Field Offices, and the EEOC's Office of Federal Operations with respect to the procedures for processing pending EEO complaints.

The United States Postal Service has the following excellent and challenging employment opportunity for highly motivated and innovative individuals. Successful candidates must demonstrate through a combination of education, training, and experience the following requirements:

Requirements

• Knowledge of contracting procedures is sufficient to function as a Contracting Officer Representative.
• Ability to develop and provide EEO training.
• Ability to provide technical advice and assistance to independent contractor Equal Employment Opportunity (EEO) investigators, district, area, and headquarters personnel.
• Ability to analyze data related to EEO complaint processing including trend analysis on case processing time frames, utilizing a computerized database and spreadsheet software.
• Ability to coordinate and oversee the work of EEO service providers including independent contractor EEO counselors, mediators, investigators and final agency decision writers.
• Knowledge of the statutes, regulations, case law, administrative procedures and Postal Service policy pertaining to equal employment opportunity (EEO) complaints sufficient to manage and process informal and formal complaints.

Reimbursement of relocation expenses will NOT be authorized

Qualified applicants must successfully pass a pre-employment drug screening to meet the U.S. Postal Service's requirement to be drug free.

Applicants must also be a U.S. citizen or have permanent resident alien status.

Job Responsibilities

• Deliver meals to patients using the Room Service program, ensuring accuracy of delivery to the correct patient, room, or nursing unit
• Position meal trays appropriately for patients, such as placing trays on bedside tables for ease of access and comfort
• Measure and record patients' intake when required by physician orders or nursing care protocols, maintaining accurate documentation
• Assist patients and family members with menu selection, providing guidance and clarification using trained scripting techniques
• Respond to patient and family questions regarding meals and menu options with professionalism, courtesy, and empathy
• Use computerized scanning devices to track meal delivery status in the Room Service system for accurate and timely updates
• Retrieve soiled trays from patient rooms and inspect them for personal belongings, medical devices, or medications before returning them to the kitchen
• Deliver floor supplies, snacks, and nutritional supplements to nursing units, and monitor stock levels of tube feedings and supplements to maintain par levels
• Communicate with nursing staff about any special meal requests, delays, or concerns regarding patient dietary needs or preferences
• Clean and sanitize meal delivery carts, trays, and dishware using commercial dish machines and cleaning equipment, following safety guidelines
• Maintain a clean and safe work environment by practicing proper food handling, sanitation procedures, and recording required HACCP temperature logs
• Perform routine restocking of trays and nourishment items, assist with detailed cleaning tasks in the kitchen or service areas, and dispose of trash or recyclables according to facility policy

Position Qualifications

Preferred:

• High School or Equivalent

Work Environment

• As a Room Service Associate, you'll work in a fast‐paced, dynamic environment that requires physical stamina and attention to safety. The role involves standing and walking for extended periods, often in areas with high foot traffic and limited space. You'll be exposed to varying temperaturesincluding brief periods in extreme heat or coldas you move between kitchen areas, delivery routes, and occasionally to outlying buildings.
• The kitchen environment can be noisy, with occasional wet floors and exposure to sharp tools and equipment such as slicers and grinders. Tasks may include bending, stooping, reaching overhead, and lifting items up to 40 lbs, as well as pushing and pulling food carts or equipment in and out of the department. Proper use of personal protective equipment (PPE)including a cutting glove, apron, goggles, safety shoes, and chemical‐resistant glovesis required to ensure your safety while performing daily tasks.

?

Age of Patients Served

• All Age Groups

HIPAA Roles‐Based Access to Patient Information

• None ‐ No access to patient information ‐ Level 0

Required

Preferred

Job Industries

• Other

Job Summary:

Position will primarily support the program administrators by preparing, facilitating, recording, and compiling meeting minutes for the HUD Capacity Building Grant Coalition.

Additional duties may include assisting with scheduling, follow-up communications, and organizing related documentation.

Ability to work independently and manage time effectively, prior experience supporting public health or government programs is a plus.

We are looking for someone with strong Project Management skills.

Essential Functions

• Essential functions are fundamental, core functions common to all positions in the class series and are not intended to be an exhaustive list of all job duties for any one position in the class. Since class specifications are descriptive and not restrictive, incumbents can complete job duties of similar kind not specifically listed here.
• Monitors, evaluates, collects and analyzes program data. Provides technical assistance and recommends course of action.
• Prepares interpretative reports of program goals and objectives, provision of services and programs/services ability to meet standards and regulations.
• Participates in developing policies, regulations, forms, proposal requests, implementing new procedures, monitors, develops, reviews, updates, negotiates contracts, and/or prepares grant applications.
• Analyzes problems, applies policy to problem situations, responds to requests for information and questions regarding services.
• Assists as consultant, coordinator/liaison for special programs and/or projects.
• Assesses impact of proposed rules on current operations financially and programmatically.
• May supervise professional staff engaged in monitoring functions, special projects and/or clerical staff performing record keeping functions.

JOB REQUIREMENTS

Applicants must have education, training and/or experience demonstrating competence in each of the following areas:

1 . Three years' experience in health or human services work such as applying theories, principles, laws and practices of health or human services programs and services that assist with and improve life for individuals, families, or communities such as financial support, employment, unemployment, housing, health care, disease preventlon, substance abuse, child protective services.

2. Six months experience in health or human services program administration such as overseeing and directing the development, implementation and evaluation of health or human services programs and services; planning and establishing short- and long-range program goals and objectives. Providing advice to other agency organizational units through consultation.

3. Six months experience in developing policies or procedures.

4. Six months experience in interpreting laws, rules, regulations, standards, policies, and procedures.

5. Six months experience in narrative report writing.

Job Title:  Lead Electrical CAD Designer

Job Family: General Design Engineering

Organization : Data Center Infrastructure Team

Location:  Remote* OR Austin, TX

*Requires up to 20% domestic and/or international travel (rare)

How will you make an impact?

The Lead Electrical CAD Designer will be responsible for creating detailed model designs, modifying existing designs, and working collaboratively with engineers and other team members to meet product specifications. The ideal candidate has in-depth knowledge of various electrical design tools, is detail-oriented, and can effectively communicate design ideas. A strong understanding of Electrical design principles, manufacturing processes, power distribution, automation control (PLC), and electronic device parts are critical. This role will involve selecting key components, developing detailed drawings for control panels, power distribution systems, electrical wiring, and transitioning design to manufacturing.

What will you do?

• Creating 2D and 3D models of electrical systems, particularly for complex projects or when visualization is needed

• Participating in design reviews to ensure accuracy and compliance with requirements

• Advanced proficiency in various CAD software, such as AutoCAD Electrical, Revit, Windchill, Autodesk Inventor-EMX, Autodesk Fusion, to design, draft, and model complex electrical for power system and automation control

• Strong understanding of electrical symbols, power systems and automation control with the concepts to accurately create designs that meet technical specifications and standards

• Work closely with engineers and other designers to meet product specifications and performance requirements

• Modify and revise designs to correct operating deficiencies or to reduce production problems

• Prepare and revise engineering drawings, schematics, BOMs, and layouts as required.

• Check and validate designs to ensure they meet required quality and safety standards

• Excellent attention to detail for ensuring the accuracy of measurements, dimensions, and design specifications

• Strong analytical skills for interpreting complex technical drawings, single line diagram, wiring diagram, schematic, power plan, automation control, ladder diagram, and electrical device specifications

• Designing and creating schematic PLC input/output connections. 

• Knowledge of manufacturing processes and materials for creating feasible and cost-effective designs.

• Evaluate/optimize manufacturing assembly processes by designing, modifying, and testing manufacturing methods and equipment, conferring with equipment vendors, and soliciting observations from production team

• Adopt at creating detailed electrical design of components, sub-assemblies, and system integration

• Capable of creating a Bill of Materials (BOM) for release to manufacturing

• Manage relationships with power systems, electronics, control component vendors, and contract manufacturers

• Keep updated with the latest technologies and methods to ensure competitive and cost-effective designs

• Discuss with management and production staff to assess engineering feasibility and cost-effectiveness

• May perform other duties and responsibilities as assigned

How will you get here?

Education :

• Bachelor’s degree in Electrical Engineering, Industrial Design or relevant field is required 

Experience :

• 6-8 years of experience in electrical design within the power distribution or data center industry.

• Proven experience as a CAD designer, preferably in an electrical engineering environment.

• Proficiency in CAD software (AutoCAD Electrical, Revit).

• Strong understanding of electrical systems, integration strategy, and system coordination

• Excellent problem-solving skills and attention to detail

• Effective communication skills to liaise with engineers, manufacturers, and clients, explaining designs and modifications clearly and efficiently

Knowledge, Skills, Abilities:

• Strong knowledge of electrical design, manufacturing processes, and material properties.

• Power Systems, PLC, VFD, motor control, electronic automation control device, sensors, AC/DC, single phase and three phase power systems.

• Electrical Standards, Codes, and regulations: IEEE, UL, ANSI/NEMA, NFPA 70E, NEC, IEC, CSA.

• Excellent interpersonal and communication skills.

• Creative, self-motivated, accountable, and team-oriented.

• Able to work independently with minimal oversight.

• Effective at presenting information and responding to management, clients, and public queries.

• Capable of influencing others and sharing best practices.

• Comfortable working as part of a global team.

• Capable of assessing projects, articulating risks, and developing project milestones.

• Familiar with stage-gate processes in project lifecycle management (PLCM).

Job Title:  Lead Electrical CAD Designer

Job Family: General Design Engineering

Organization : Data Center Infrastructure Team

Location:  Remote* OR Austin, TX

*Requires up to 20% domestic and/or international travel (rare)

How will you make an impact?

The Lead Electrical CAD Designer will be responsible for creating detailed model designs, modifying existing designs, and working collaboratively with engineers and other team members to meet product specifications. The ideal candidate has in-depth knowledge of various electrical design tools, is detail-oriented, and can effectively communicate design ideas. A strong understanding of Electrical design principles, manufacturing processes, power distribution, automation control (PLC), and electronic device parts are critical. This role will involve selecting key components, developing detailed drawings for control panels, power distribution systems, electrical wiring, and transitioning design to manufacturing.

What will you do?

• Creating 2D and 3D models of electrical systems, particularly for complex projects or when visualization is needed

• Participating in design reviews to ensure accuracy and compliance with requirements

• Advanced proficiency in various CAD software, such as AutoCAD Electrical, Revit, Windchill, Autodesk Inventor-EMX, Autodesk Fusion, to design, draft, and model complex electrical for power system and automation control

• Strong understanding of electrical symbols, power systems and automation control with the concepts to accurately create designs that meet technical specifications and standards

• Work closely with engineers and other designers to meet product specifications and performance requirements

• Modify and revise designs to correct operating deficiencies or to reduce production problems

• Prepare and revise engineering drawings, schematics, BOMs, and layouts as required.

• Check and validate designs to ensure they meet required quality and safety standards

• Excellent attention to detail for ensuring the accuracy of measurements, dimensions, and design specifications

• Strong analytical skills for interpreting complex technical drawings, single line diagram, wiring diagram, schematic, power plan, automation control, ladder diagram, and electrical device specifications

• Designing and creating schematic PLC input/output connections. 

• Knowledge of manufacturing processes and materials for creating feasible and cost-effective designs.

• Evaluate/optimize manufacturing assembly processes by designing, modifying, and testing manufacturing methods and equipment, conferring with equipment vendors, and soliciting observations from production team

• Adopt at creating detailed electrical design of components, sub-assemblies, and system integration

• Capable of creating a Bill of Materials (BOM) for release to manufacturing

• Manage relationships with power systems, electronics, control component vendors, and contract manufacturers

• Keep updated with the latest technologies and methods to ensure competitive and cost-effective designs

• Discuss with management and production staff to assess engineering feasibility and cost-effectiveness

• May perform other duties and responsibilities as assigned

How will you get here?

Education :

• Bachelor’s degree in Electrical Engineering, Industrial Design or relevant field is required 

Experience :

• 6-8 years of experience in electrical design within the power distribution or data center industry.

• Proven experience as a CAD designer, preferably in an electrical engineering environment.

• Proficiency in CAD software (AutoCAD Electrical, Revit).

• Strong understanding of electrical systems, integration strategy, and system coordination

• Excellent problem-solving skills and attention to detail

• Effective communication skills to liaise with engineers, manufacturers, and clients, explaining designs and modifications clearly and efficiently

Knowledge, Skills, Abilities:

• Strong knowledge of electrical design, manufacturing processes, and material properties.

• Power Systems, PLC, VFD, motor control, electronic automation control device, sensors, AC/DC, single phase and three phase power systems.

• Electrical Standards, Codes, and regulations: IEEE, UL, ANSI/NEMA, NFPA 70E, NEC, IEC, CSA.

• Excellent interpersonal and communication skills.

• Creative, self-motivated, accountable, and team-oriented.

• Able to work independently with minimal oversight.

• Effective at presenting information and responding to management, clients, and public queries.

• Capable of influencing others and sharing best practices.

• Comfortable working as part of a global team.

• Capable of assessing projects, articulating risks, and developing project milestones.

• Familiar with stage-gate processes in project lifecycle management (PLCM).

Job Title:  Lead Electrical CAD Designer

Job Family: General Design Engineering

Organization : Data Center Infrastructure Team

Location:  Remote* OR Austin, TX

*Requires up to 20% domestic and/or international travel (rare)

How will you make an impact?

The Lead Electrical CAD Designer will be responsible for creating detailed model designs, modifying existing designs, and working collaboratively with engineers and other team members to meet product specifications. The ideal candidate has in-depth knowledge of various electrical design tools, is detail-oriented, and can effectively communicate design ideas. A strong understanding of Electrical design principles, manufacturing processes, power distribution, automation control (PLC), and electronic device parts are critical. This role will involve selecting key components, developing detailed drawings for control panels, power distribution systems, electrical wiring, and transitioning design to manufacturing.

What will you do?

• Creating 2D and 3D models of electrical systems, particularly for complex projects or when visualization is needed

• Participating in design reviews to ensure accuracy and compliance with requirements

• Advanced proficiency in various CAD software, such as AutoCAD Electrical, Revit, Windchill, Autodesk Inventor-EMX, Autodesk Fusion, to design, draft, and model complex electrical for power system and automation control

• Strong understanding of electrical symbols, power systems and automation control with the concepts to accurately create designs that meet technical specifications and standards

• Work closely with engineers and other designers to meet product specifications and performance requirements

• Modify and revise designs to correct operating deficiencies or to reduce production problems

• Prepare and revise engineering drawings, schematics, BOMs, and layouts as required.

• Check and validate designs to ensure they meet required quality and safety standards

• Excellent attention to detail for ensuring the accuracy of measurements, dimensions, and design specifications

• Strong analytical skills for interpreting complex technical drawings, single line diagram, wiring diagram, schematic, power plan, automation control, ladder diagram, and electrical device specifications

• Designing and creating schematic PLC input/output connections. 

• Knowledge of manufacturing processes and materials for creating feasible and cost-effective designs.

• Evaluate/optimize manufacturing assembly processes by designing, modifying, and testing manufacturing methods and equipment, conferring with equipment vendors, and soliciting observations from production team

• Adopt at creating detailed electrical design of components, sub-assemblies, and system integration

• Capable of creating a Bill of Materials (BOM) for release to manufacturing

• Manage relationships with power systems, electronics, control component vendors, and contract manufacturers

• Keep updated with the latest technologies and methods to ensure competitive and cost-effective designs

• Discuss with management and production staff to assess engineering feasibility and cost-effectiveness

• May perform other duties and responsibilities as assigned

How will you get here?

Education :

• Bachelor’s degree in Electrical Engineering, Industrial Design or relevant field is required 

Experience :

• 6-8 years of experience in electrical design within the power distribution or data center industry.

• Proven experience as a CAD designer, preferably in an electrical engineering environment.

• Proficiency in CAD software (AutoCAD Electrical, Revit).

• Strong understanding of electrical systems, integration strategy, and system coordination

• Excellent problem-solving skills and attention to detail

• Effective communication skills to liaise with engineers, manufacturers, and clients, explaining designs and modifications clearly and efficiently

Knowledge, Skills, Abilities:

• Strong knowledge of electrical design, manufacturing processes, and material properties.

• Power Systems, PLC, VFD, motor control, electronic automation control device, sensors, AC/DC, single phase and three phase power systems.

• Electrical Standards, Codes, and regulations: IEEE, UL, ANSI/NEMA, NFPA 70E, NEC, IEC, CSA.

• Excellent interpersonal and communication skills.

• Creative, self-motivated, accountable, and team-oriented.

• Able to work independently with minimal oversight.

• Effective at presenting information and responding to management, clients, and public queries.

• Capable of influencing others and sharing best practices.

• Comfortable working as part of a global team.

• Capable of assessing projects, articulating risks, and developing project milestones.

• Familiar with stage-gate processes in project lifecycle management (PLCM).

Job Title:  Lead Electrical CAD Designer

Job Family: General Design Engineering

Organization : Data Center Infrastructure Team

Location:  Remote* OR Austin, TX

*Requires up to 20% domestic and/or international travel (rare)

How will you make an impact?

The Lead Electrical CAD Designer will be responsible for creating detailed model designs, modifying existing designs, and working collaboratively with engineers and other team members to meet product specifications. The ideal candidate has in-depth knowledge of various electrical design tools, is detail-oriented, and can effectively communicate design ideas. A strong understanding of Electrical design principles, manufacturing processes, power distribution, automation control (PLC), and electronic device parts are critical. This role will involve selecting key components, developing detailed drawings for control panels, power distribution systems, electrical wiring, and transitioning design to manufacturing.

What will you do?

• Creating 2D and 3D models of electrical systems, particularly for complex projects or when visualization is needed

• Participating in design reviews to ensure accuracy and compliance with requirements

• Advanced proficiency in various CAD software, such as AutoCAD Electrical, Revit, Windchill, Autodesk Inventor-EMX, Autodesk Fusion, to design, draft, and model complex electrical for power system and automation control

• Strong understanding of electrical symbols, power systems and automation control with the concepts to accurately create designs that meet technical specifications and standards

• Work closely with engineers and other designers to meet product specifications and performance requirements

• Modify and revise designs to correct operating deficiencies or to reduce production problems

• Prepare and revise engineering drawings, schematics, BOMs, and layouts as required.

• Check and validate designs to ensure they meet required quality and safety standards

• Excellent attention to detail for ensuring the accuracy of measurements, dimensions, and design specifications

• Strong analytical skills for interpreting complex technical drawings, single line diagram, wiring diagram, schematic, power plan, automation control, ladder diagram, and electrical device specifications

• Designing and creating schematic PLC input/output connections. 

• Knowledge of manufacturing processes and materials for creating feasible and cost-effective designs.

• Evaluate/optimize manufacturing assembly processes by designing, modifying, and testing manufacturing methods and equipment, conferring with equipment vendors, and soliciting observations from production team

• Adopt at creating detailed electrical design of components, sub-assemblies, and system integration

• Capable of creating a Bill of Materials (BOM) for release to manufacturing

• Manage relationships with power systems, electronics, control component vendors, and contract manufacturers

• Keep updated with the latest technologies and methods to ensure competitive and cost-effective designs

• Discuss with management and production staff to assess engineering feasibility and cost-effectiveness

• May perform other duties and responsibilities as assigned

How will you get here?

Education :

• Bachelor’s degree in Electrical Engineering, Industrial Design or relevant field is required 

Experience :

• 6-8 years of experience in electrical design within the power distribution or data center industry.

• Proven experience as a CAD designer, preferably in an electrical engineering environment.

• Proficiency in CAD software (AutoCAD Electrical, Revit).

• Strong understanding of electrical systems, integration strategy, and system coordination

• Excellent problem-solving skills and attention to detail

• Effective communication skills to liaise with engineers, manufacturers, and clients, explaining designs and modifications clearly and efficiently

Knowledge, Skills, Abilities:

• Strong knowledge of electrical design, manufacturing processes, and material properties.

• Power Systems, PLC, VFD, motor control, electronic automation control device, sensors, AC/DC, single phase and three phase power systems.

• Electrical Standards, Codes, and regulations: IEEE, UL, ANSI/NEMA, NFPA 70E, NEC, IEC, CSA.

• Excellent interpersonal and communication skills.

• Creative, self-motivated, accountable, and team-oriented.

• Able to work independently with minimal oversight.

• Effective at presenting information and responding to management, clients, and public queries.

• Capable of influencing others and sharing best practices.

• Comfortable working as part of a global team.

• Capable of assessing projects, articulating risks, and developing project milestones.

• Familiar with stage-gate processes in project lifecycle management (PLCM).

Immediate need for a talented Assistant Electrical Designer . This is a 12 months contract opportunity with long-term potential and is located in Cary NC(Onsite). Please review the job description below and contact me ASAP if you are interested.

Job Diva ID: 26-06912

Pay Range: $32 - $36/hourly. Employee benefits include, but are not limited to, health insurance (medical, dental, vision), 401(k) plan, and paid sick leave (depending on work location).

Key Responsibilities:

• Assist in designing various electrical project designs including creating electrical schematics, grid plan layouts, electrical power systems, lighting systems, protection and controls, and site and facility design.
• Follow all company, client and project design and drafting standards.
• Assist with set up of electrical CAD configuration and procedures according to project requirements at the beginning of a project for the electrical design team.
• Assist in preparing engineering drawings from rough sketches or from general engineering and design information (verbal instructions and notes) using CAD software programs
• Assist with a full range of drawing production work including problem analysis, design layout and calculations on non-routine assignments of substantial variety and complexity.
• Assist with a variety of assignments using prescribed methods and standard techniques including drawing sequence and presentation, sizing various system components and refining rough sketches.
• Assist with initial rough designs or sketches and redlines or mark-ups on ongoing projects.
• Assist with analysing reports, drawings, and tests, to plan and design projects.
• Apply design codes and specifications related to design requirements.
• Complete and review design drawings within scope, budget and schedule.
• Perform project tasks and assignments within budgeted hours and deadlines.
• Incorporate schedules, budgets and project criteria into electrical design and layouts.
• Organize and maintain all revisions of project drawings, plot files and project-related information in a logical and well-structured manner.
• Performs other duties as assigned and complies with all policies and standards.

Key Requirements and Technology Experience:

• Key skills: AutoCAD, Electrical Design e.g. Transmission or Distribution or Substation or Pole Design or Protection & Control Design.
• Bachelor Degree in drafting technology or related field and min 2 years related experience Required or Associate Degree and min 3 years related experience Required or High School and min 4 years progressive detailing and design experience is Required.
• Strong understanding of design software such as: AutoCAD, MicroStation, and Excel to develop the design deliverables.
• Ability to learn and effectively utilize new design software programs.
• Ability to utilize both 2D and 3D applications to prepare engineering drawings.
• Basic knowledge in design, calculations and design systems.
• Basic knowledge in the theory and practices of engineering discipline; competent in the fundamental concepts of other disciplines as they relate to the assigned discipline; and capable of operating related discipline design software necessary to execute production tasks.
• Ability to work collaboratively with others (Project Managers, Engineers and Designers) in a multi-discipline project team environment to resolve design or drawing issues as appropriate and to accomplish objectives.
• Excellent written & verbal communication skills, strong analytical and problem solving skills, and attention to detail.

Our client is a leading Construction industry , and we are currently interviewing to fill this and other similar contract positions. If you are interested in this position, please apply online for immediate consideration.

Pyramid Consulting, Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, colour, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.

By applying to our jobs, you agree to receive calls, AI-generated calls, text messages, or emails from Pyramid Consulting, Inc. and its affiliates, and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here.

We are seeking an experienced and highly motivated Senior Electrical Estimator to lead estimating efforts for large-scale industrial and commercial electrical construction projects. This individual will play a critical role in developing competitive, accurate, and strategic cost estimates. The Senior Electrical Estimator will collaborate closely with project management, engineering, and executive teams throughout the preconstruction phase. Over time, this role is intended to grow into a leadership & supervisory role responsible for the estimating department.

·        Lead the preparation of detailed and accurate cost estimates for industrial and commercial electrical construction projects.

·        Perform complex quantity take-offs and apply appropriate unit pricing for labor, material, equipment, and subcontractor costs.

·        Develop bid strategies and review proposals for accuracy, completeness, and competitiveness.

·        Conduct site visits and attend pre-bid meetings to assess project scope, site conditions, and risks.

·        Lead bid reviews and presentations to executive leadership.

·        Collaborate with project managers and engineers to ensure estimate alignment with execution plans.

·        Evaluate historical data and market trends to develop and refine cost databases.

·        Mentor and support junior estimators and assist in training programs.

·        Maintain strong vendor and subcontractor relationships to support competitive pricing.

·        Assist in value engineering, design-assist, and design-build efforts as needed.

·        Continually transform estimating department processes, procedures and best practices.

·        Expertise in reading and interpreting complex plans, specifications, and electrical schematics.

·        Excellent analytical, organizational, and time management skills.

·        Strong written and verbal communication skills for internal and external coordination, leading complex conversations with vendors, sub-contracts, team members and community members.

·        Ability to manage multiple bids and deadlines simultaneously.

·        Experience in the industrial or commercial construction industry (field and/or office roles)

·        Proficiency with the estimating software (McCormick preferred); and other construction software tools like Bluebeam, etc.

·        Strong understanding of NEC (National Electrical Code), construction sequencing, and industry best practices.

·        Electrical estimating experience with a focus on commercial and industrial construction.

·        Degree in Electrical Engineering, Construction Management, or related advanced field experience

·        Supervisory experience in leading a team of technical professionals

·        Experience with design-build or design-assist projects.

·        Familiarity with industrial automation and controls

·        Strong business acumen and ability to evaluate risk and profitability.

·        Knowledge of local labor markets, suppliers, and subcontractors.

·        Competitive salary

·        Robust employee benefits package (health, dental, vision, etc.)

·        401(k) with company match

·        Paid time off and holidays

·        Professional development and leadership growth opportunities

Join our team and contribute to the success of complex, high-impact electrical construction projects. Your contributions will help shape our competitive advantage in the industrial and commercial sectors.

Location: Newton, KS

Job Type: Full-Time | Exempt

At Sonos we want to create the ultimate listening experience for our customers and know that it starts by listening to each other. As part of the Sonos team, you'll collaborate with people of all styles, skill sets, and backgrounds to realize our vision while fostering a community where everyone feels included and empowered to do the best work of their lives.

This role is a hybrid position.
Some roles require an office while others may be done remotely. This position is considered hybrid, allowing for a combination of remote work and in-office collaboration. Qualified applicants must live within commuting distance of our Boston, Seattle or Goleta office locations.

What You'll Do

• Manage supplier relationships and commercial activities such as business and technology reviews, RFQs, and roadmap/strategy discussions.

• Craft comprehensive commodity and business strategies aimed at maximizing efficiency and driving down costs through strategic initiatives,

• Lead executive business reviews with internal/ external stakeholders.

• Establish commodity strategic direction by working with our technical teams, understanding the technical and the necessary business requirements that allow for a competitive advantage and position us for profitable growth. This requires a deep understanding of the supply base, technical needs and cost structures.

• Build robust supply chains based on product requirements and needs at the most basic levels of our supply chain to ensure that we have a complete and thorough understanding of the Sonos supply chain.

• Ensure continuity of supply. Set up long-term/ short-term capacity planning with supplier, partner with Operations and Material teams to schedule supply to meet Sonos's component demand.

• Collaborate with Product design and Engineering teams to review initial specifications of the parts/modules recommend sources to influence technical decisions in early phase of the program.

• Be able to manage multiple projects in parallel.

• Evaluate technical and business risks, analyze based on the data and create mitigation plans/alternatives.

• Need to support management of development builds, materials, and any risk to execute successful ramp in NPI stage.

What You'll Need

Basic Qualifications:

• BS degree with strong technical acumen and business understanding.

• 8+ years work experience in sourcing related field.

• Ability to toggle between strategic and detail oriented thinking.

• Top-notch negotiation skills.

• Ability to influence cross functional teams.

• Demonstrated ability to apply analytical techniques to problem solving.

• Strategic thinker and result oriented.

• Natural leadership competencies; influences others through style and subject matter expertise.

• An ability to balance business and technical objectives in decision making.

• Excellent communication/presentation skills.

• Ability to effectively work in multicultural global business environment.

Preferred Qualifications:

• Bachelor degrees or Master degree in electrical engineering preferred.

• Travel within US as well as internationally up to 15% of the time.

• Experience in consumer electronics industry.

• Established relationships with suppliers and supply chains.

• General understanding of semiconductor supply chains, manufacturing processes, and silicon platform development.

• Experience in systems - Arena, Microstrategy, Tableau, SAP.

• Hands-on experience in any of the following: Electrical Engineering, Semiconductor markets, Pricing strategy for electrical parts.

Research shows that some candidates may not apply for roles if they don't meet all the criteria. If you don't have 100% of the skills listed, we strongly encourage you to apply if interested.

Visa Sponsorship :Sonos is unable to sponsor or take over sponsorship of an employment visa for this role at this time. We ask that applicants be authorized to work for any US employer, both now and in the future.

#LI-Hybrid

Your profile will be reviewed and you'll hear from us once we have an update. At Sonos we take the time to hire right and appreciate your patience.

The base pay range for this role based off geographic location is:

The specific pay offered will depend on the candidate's geographic location, as well as qualifications and experience. We apply geographic pay differentials based on the cost of labor in the market. Employees in high-cost locations may be compensated at the upper end of the range, while those in medium or low cost markets may be compensated at the lower end of the range. Your recruiter can provide more details about the specific salary range for your location during the hiring process.

Please note that compensation details listed in US job postings reflect the base salary only, and do not include bonus, equity, or benefits.

We also offer a comprehensive benefits program with choice and flexibility in mind to help support the health, wealth, and overall well-being of our employees. Regular full time employees in the US are eligible for benefits on day one, including:

• Medical, Dental, and Vision Insurance

• A 401(k) plan with company matching and immediate vesting

• An Open Time Off policy (OTO) so you have maximum opportunity to disconnect and recharge, with no tenure-based vacation accruals required

• 80 hours of sick time upon hire, refreshed annually

• Up to 12 paid holidays per calendar year

• Sonos offers a generous paid leave program for new parents or to care for a family member with a serious health condition, as well as short- and long-term disability for your own medical condition

• Company-paid Disability, Life, and AD&D Insurance

• Voluntary benefits, including Voluntary Life, AD&D, Accident, and Pet Insurance

• Mental health benefits to support your holistic well-being

• A generous employee discount program & Sonos Radio HD - on us!

Note: No amount of pay is considered to be wages or compensation until such amount is earned, vested, and determinable. The amount and availability of any bonus, benefits, or any other form of compensation and benefits that are allocable to a particular employee remains in the Company's sole discretion unless and until paid and may be modified at the Company's sole discretion, consistent with the law.

Notice to U.S. Job Applicants: Sonos is an equal opportunity employer. We evaluate qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, and other legally protected characteristics.

Sonos is committed to working with and providing reasonable accommodations to individuals with disabilities. If you need a reasonable accommodation because of a disability for any part of the employment process, please send an e-mail to and let us know the nature of your request and your contact information.

Power the data centers, hospitals, and other mission-critical facilities of tomorrow-designing both rugged rental products and stationary generator-set packages that keep them online. As an Electrical Project Engineer, you'll work in a unique manufacturing and dealer environment, leveraging expert-level AutoCAD and Inventor skills to craft low- and medium-voltage AC layouts, DC controls, and the logic that ties multiple gensets into advanced paralleling switchgear and smart control panels. Juggle multiple high-impact projects, troubleshoot in the test cell, and serve as the go-to authority for production teams and customers alike-making an outsized impact alongside a collaborative squad of engineers, sales pros, and suppliers.

• Produce comprehensive wiring schematics, conduit schedules, and panel layouts in AutoCAD and Inventor for diesel and natural gas gensets, ensuring every reference, layer, and legend is unambiguous.

• Size and specify breakers, relays, PLC/HMI hardware, and interface circuits that integrate seamlessly with low to medium-voltage paralleling switchgear and DC control systems.

• Audit project drawings, vendor prints, and specifications against UL, NFPA 70/110, ISO, and customer standards; log variances and close them before release.

• Diagnose elusive startup, commissioning, and controls problems for technicians through root-cause-based recommendations that feed back into design libraries to improve the product.

• Translate application questions into concise recommendations and solutions and document in formal engineering notes.

• Maintain production continuity
  • Follow standard protocols and proven design protocols to ensure consistent high-quality products that meet or exceed customer requirements.
• Manage the submittal dossier
  • Assemble, index, and track all drawings, studies, and data sheets through the approval cycle; document every revision for full traceability.
• Leverage Caterpillar engineering resources
  • Retrieve and interpret factory application guides, PID data, and software updates; ensure the latest revisions are embedded in each project.
• Enable precise estimating
  • Deliver dimensioned one-lines, BOMs, and labor take-offs to the Sales team so quotes reflect real scope, margin, and risk.
• Design for the exceptional case
  • Apply first-principles analysis to bespoke components or control sequences required by unique site conditions or regulatory environments.
• Control the critical path
  • Use tools and milestone checklists to keep engineering actions on time, document slippage causes, and propose corrective actions proactively.
• Adapt as requirements evolve
  • When priorities shift, re-baseline drawings, calculations, designs, and priorities so the entire team works from a single source of truth.

If precision, thorough documentation, and methodical problem-solving are how you create value, this role will let you practice your craft at a high level of electrical engineering discipline.

Education & Experience

• B.S. in Electrical Engineering (preferred) - or at least ten years of hands-on experience in the engine-driven power-generation industry or a closely related technology field with design engineering experience for 5+ years.
• Military veterans are strongly encouraged to apply.

Technical Expertise

• Proficiency with Caterpillar toolsets (CAT ET, CAT Monitoring Software, SIS Web, TMI, EDDC) is highly desirable.
• Working knowledge of diesel- and natural-gas generator sets is preferred; familiarity with lithium-ion energy-storage systems is a plus.
• Thorough understanding of relevant codes and standards-NFPA 70/110, NEC, NEMA, UL, IEEE.
• Expert-level 2D drafting in AutoCAD; 3D modeling experience required (Inventor preferred, or comparable platforms accepted).
• Exposure to generator paralleling switchgear, remote-fuel supply, and remote-cooling systems is preferred.

Other Requirements

• Valid driver's license with a clean record (no more than two minor violations in the last three years and no major violations in the last five years). A motor vehicle driving record check will be conducted for the final candidate.

Altorfer Inc. offers an industry leading compensation and benefit package:

* Health, Dental, Vision, Disability, and Life Insurance
* 401(k)
* Paid Holidays
* Paid Parental Leave and Funeral Leave
* Paid Time Off: Prorated 80 hours of PTO + 1 Floating Holiday
* Education Assistance
* Personal Tool Insurance, and Safety Equipment Reimbursement
* Voluntary Benefits: Supplemental Insurance, Accident, Critical and Hospital Indemnity Insurance, Legal Assistance and Identity & Fraud Protection

Salary Range: $60K to $120K annually

Work is normally performed both indoors and outdoors with moderate noise conditions. Limited exposure to all weather conditions is associated with this position. Physical requirements may include speaking, listening, writing, typing, reaching, pushing, pulling, lifting, carrying, sitting for extended periods, and managing stress. Occasionally required to walk or stand for short durations on manufacturing floors or job sites. Job hazards may include tripping, slipping, falling, jobsite hazards, hand injuries, driving related hazards, equipment movement, overexertion due to stress and fatigue. Required to follow all safety protocols and wear appropriate personal protective equipment depending on the environment or location. The noise level in the work environment is usually moderate to high. The noise level in the office environment is usually moderate to low. Must be flexible to work varying schedules and hours as needed. Occasional travel may be required. The physical demands described above are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

Why Work for Altorfer?

At Altorfer, our iron is just the beginning. Our people make our company successful, and we would not be who we are without them. As a third-generation, family-owned company created in 1957, we bring our values into how we do business. Everyone from technicians, sales representatives, administrative professionals, or somewhere in between is part of the "A-Team" and is critical to our success. Here at Altorfer, we have over 35 locations and 1300 employees with long tenure for you to learn from. We have a collaborative, family-valued culture, with a great reputation in the industry. A company that offers competitive pay, excellent benefits, and a remarkable team of people to work with.

Job Title: Electrical QA Inspector – Semiconductor Manufacturing (Fab Project)

Location: Manassas, VA

Project: Large-Scale Semiconductor Manufacturing Facility

About the Project

We are supporting a major semiconductor manufacturing expansion in Manassas, contributing to one of the most advanced fabrication (fab) environments in the United States. This high-profile project involves complex electrical systems, cleanroom infrastructure, and mission-critical power distribution systems essential to semiconductor production.

Position Summary

We are seeking an experienced Electrical QA Inspector with semiconductor or high-tech manufacturing experience to support a large-scale fab construction project. This role is responsible for ensuring all electrical installations meet project specifications, NEC requirements, industry standards, and client quality expectations.

The ideal candidate will have experience in mission-critical facilities, cleanroom environments, or semiconductor fabs and a strong understanding of electrical quality control processes in large industrial construction projects.

Key Responsibilities

• Perform quality assurance inspections of electrical installations including:
• Medium- and low-voltage power distribution systems
• Switchgear, transformers, and UPS systems
• Cable tray, conduit, and grounding systems
• Cleanroom electrical systems and specialty equipment feeds
• Verify installation compliance with:
• NEC and applicable codes
• Project drawings and specifications
• ITPs (Inspection & Test Plans)
• Conduct field inspections and document findings through QA reports
• Coordinate with contractors, engineers, and project management teams
• Witness and document testing and commissioning activities
• Track deficiencies, manage punch lists, and verify corrective actions
• Support turnover documentation and system handover processes

Required Qualifications

• 5+ years of electrical QA/QC inspection experience in industrial or mission-critical construction
• Electrical journeyman, Master Electrician, or Electrical Engineer.
• Semiconductor fab, cleanroom, or data center project experience preferred
• Strong knowledge of NEC and electrical construction standards
• Ability to read and interpret electrical drawings and specifications
• Experience with submittal reviews, RFIs, and change documentation
• Strong documentation and reporting skills
• OSHA 10 or 30 certification preferred

Job Title: Principal Electrical Design Engineer

Job Family: Electrical Design Engineering

Organization: Data Center Infrastructure Team

Location: Remote* OR Austin, TX

*Requires up to 20% domestic and/or international travel (rare)

How will you make an impact?

We are seeking a highly experienced and innovative Principal Controls Engineer to lead the development, optimization and implementation of advanced control systems across critical infrastructure products and automation platforms. This role is critical to ensuring the performance, reliability, and scalability of critical systems, with a strong emphasis on data center infrastructure, power/energy management, and industrial automation.

This role will involve designing and developing wiring harness systems, including schematic creation, harness architecture, panel layout, developing specifications, selecting key components, and transitioning design to manufacturing. Furthermore, the position includes leading test process implementation and ensuring equipment alignment to maintain the highest standards of operational excellence and reliability.

What will you do?  

• Define and own the control system architecture across multiple platforms, including PLCs, BMS, EPMS, and ATS systems, ensuring scalability, reliability, and maintainability.
• Develop detailed control system specifications, functional design documents, and interface definitions for all subsystems.
• Proficiency in PLC/SCADA programming, HMI development, and system integration with IT networks and facility equipment.
• Ability to read and create BOMs. visual aids, electrical schematics, control diagrams, and sequence of operations.
• Define control logic, sensor integration, and communication protocols (e.g., Modbus, BACnet, SNMP) for intelligent power and cooling management.
• Validate control systems through simulation, testing, and commissioning to ensure reliability, safety, and responsiveness.
• Experience with critical infrastructure systems: UPS, generators, switchgear, chillers, CRAC/CRAH units, fire suppression systems.
• Lead Factory Acceptance Testing (FAT) and Site Acceptance Testing (SAT) for new projects and revisions.
• Drive the development of system-level simulations and digital twins to validate control strategies before deployment
• Architect integration strategies for control systems with enterprise platforms such as SCADA, CMMS, and cloud-based monitoring tools
• Establish design patterns and best practices for modular and reusable control logic across projects
• Lead root cause analysis and resolution of complex control system issues during commissioning and operations
• Evaluate emerging technologies and automation trends to continuously improve system performance and efficiency
• Develop and maintain documentation for system architecture, control logic, and operational procedures
• Collaborate with electrical, mechanical, software, and facilities engineering teams to ensure seamless integration of control systems with physical infrastructure
• Work closely with cross functional teams to align control system designs with business requirements, timelines, and operational constraints
• Facilitate design reviews, technical workshops, and cross-functional planning sessions to ensure alignment and transparency across engineering disciplines
• Support commissioning and field teams during deployment, troubleshooting, and optimization of control systems

How will you get here?

Education: 

• Bachelor’s Degree in Electrical Engineering or a relevant engineering discipline.

Experience: 

• 8+ years pf experience in control system design and implementation
• Deep expertise in the following:
  • PLC programming (Allen-Bradley, Siemens, Schneider Electric)
  • Building Management Systems (BMS) integration and optimization
  • Electrical Power Monitoring Systems (EPMS/EDPM) for real-time energy analytics
  • Automatic Transfer Switches (ATS) control and failover logic
• Strong proficiency in control theory, system modeling, and simulation tools (MATLAB/Simulink)
• Experience with industrial protocols (Modbus, BACnet, OPC UA, Ethernet/IP)
• Familiarity with NFPA, IEC, and ISO standards related to control systems and safety.

Knowledge, Skills, Abilities:  

• Excellent interpersonal and communication skills
• Creative, self-motivated, accountable, and team-oriented
• Able to work independently with minimal oversight as part of a global team
• Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
• Skilled in writing reports, business correspondence, and procedural guides
• Effective at presenting information and responding to management, clients, and public queries
• Capable of influencing others and sharing best practices while mentoring less experienced engineers
• Capable of assessing projects, articulating risks, and developing project milestones
• Familiar with stage-gate processes in project lifecycle management (PLCM)
• Excellent problem-solving skills and attention to detail
• Experience in EPlan, WindChill, SolidWorks, and DevOps are a plus
• Experience with hyperscale or colocation data center environments
• Familiarity with low and medium-voltage systems

Preferred Qualifications:? 

• Master’s Degree in Electrical Engineering or a relevant engineering discipline
• Active Professional Engineer (PE) license
• Experience in mission-critical environments such as data centers, manufacturing, or energy systems.
• Experience with digital twin modeling and predictive maintenance strategies.