Mra Guidelines Jobs in Usa

Provides Planned Maintenance (PM), safety testing, repairs, calibration, installation, routine and emergency service to general diagnostic and therapeutic medical equipment, as assigned by the Clinical Engineering (CE) Manager.

Knows, understands, incorporates and demonstrates the mission, vision and core values of Trinity Health and the Ministry Organization in leadership behaviors, practices and decisions.

Performs PM procedures on multiple types of general and specialized clinical equipment.

Performs PM procedures using manufacturers' recommendations, standards or code requirements, as well as industry acceptable processes as guidelines.

Performs Corrective Maintenance (CM) procedures including diagnosing problems using thermodynamic, electronic/electrical, mechanical, pneumatic, hydraulic, and/or other related sciences and documents results of activities performed to comply with all regulatory and standards requirements.

Notifies equipment users and Clinical Engineering Management of repair status and delays as necessary.

Interacts with clinical staff to understand and resolve operational problems in scheduling and completing PM procedures while minimizing interference to hospital departments.

Determines need for replacement parts and supplies, selects the most cost effective source, and submits properly completed parts request using established policies and guidelines.

Completes corrective and planned maintenance work order documentation.

Promotes teamwork by keeping others informed, participating effectively in group decision making, works to accomplish team objectives and projects, and solicits feedback about one's effectiveness as a team member. 

Continually improves processes by seeking ways to eliminate and reduce waste.

Has authority (based on department guidelines)  to order parts and supplies required for  emergency service or repair of  medical equipment. Recommends test equipment and spare equipment parts to the CE Manager or Lead Technician.

Provides on-call service coverage after normal business hours on a rotating basis, as assigned.

Performs other duties as assigned or requested by CE Manager.

Maintains a working knowledge of applicable Federal, State and local laws/regulations; the Trinity Health Integrity and Compliance Program and Code of Conduct; as well as other policies and procedures in order to ensure adherence in a manner that reflects honest, ethical and professional behavior.

Associates of Applied Sciences degree in medical electronics, electronic technology or related field, including comparable military training or an equivalent combination of education and experience.

One to two-years experience performing corrective and planned maintenance on medical equipment per policy.

Must have a basic understanding of anatomy, physiology, and medical terminology.

Working knowledge and ability to use basic hand tools and test equipment specific to the field. Ability to train CE associates on use and application of select test equipment.

Must have knowledge and understanding of OSHA, NFPA, The Joint Commission, EOC, FDA and other specific regulations and standards pertaining to clinical equipment service and repair.

Must possess a personal presence that is characterized by a sense of honesty, integrity and caring with ability to inspire and motivate others to promote the philosophy, mission, vision, goals and values of Trinity Health, Ministry Organizations, and Clinical Engineering.

Must have basic understanding of personal computer operation, applications, and ability to input data using keyboard.  Technician must be able to  follow complex written instructions, perform tasks and document actions taken.

Ability to operate complex test equipment, analyze and interpret information provided by equipment and clinical staff to determine equipment operational condition.

 Strong customer service and communications skills are required to interact with hospital  personnel and vendors to achieve positive outcomes.

Ability to provide or coordinate in-service training to clinical/professional staff on medical device basic operational and safety functions.

Must be physically able to balance, bend, climb, crawl, crouch, kneel, reach, sit, squat, stand, twist, and walk.

Possess ability to mentally concentrate while being subject to stress, interruptions and changing work priorities.

Must be able to work and follow OSHA guidelines while in a hazardous environment(s) such as electrocution potentials, mechanical energies, bloodborne/airborne pathogens, dust and inclement weather, marked changes in temperature and/or humidity, radiation, fumes/vapors, sharp instruments/tools, hazardous liquids, and operating devices. 

Must be able to hear speech, distinguish sounds, and speak.

Must have near vision, far vision, depth perception, and be able to distinguish colors.

Must have sensory ability to distinguish hot, cold, range of temperature, surfaces, fine motor skills, manual dexterity, and detect/distinguish odors.

Must be able to carry or lift up to 50 pounds routinely (50% of the time) and on occasion (5% of the time) up to 100 pounds.

Must be able to push or pull over 100 pounds frequently (20% of the time).

Maintains safe working environment for self, other associates, patients, visitors, and medical staff in accordance with applicable standards and procedures relevant to  job duties.

Must be able to adapt to frequently changing work priorities.

Must be able to travel to the various Trinity Health, Ministry Organizations, subsidiaries, and/or training facilities.

Our Commitment

Rooted in our Mission and Core Values, we honor the dignity of every person and recognize the unique perspectives, experiences, and talents each colleague brings. By finding common ground and embracing our differences, we grow stronger together and deliver more compassionate, person-centered care. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other status protected by federal, state, or local law.

Provides Planned Maintenance (PM), safety testing, repairs, calibration, installation, routine and emergency service to general and various specialized diagnostic and therapeutic medical equipment, as assigned by the Clinical Engineering (CE) Manager.

Knows, understands, incorporates and demonstrates the mission, vision and core values of Trinity Health and the Ministry Organization in leadership behaviors, practices and decisions.

Performs PM procedures on multiple types of general and specialized clinical equipment.

Performs PM procedures using manufacturer’s recommendations, standards or code requirements, as well as industry acceptable processes as guidelines.

Performs corrective maintenance procedures including diagnosing problems using thermodynamic, electronic/electrical, mechanical, pneumatic, hydraulic, and/or other sciences and documents results of activities performed to comply with all regulatory and standard requirements.

Notifies equipment users, CE Managers, and Regional Director of repair status and delays as necessary.

Interacts with clinical staff to understand and resolve operational problems in scheduling and completing PM procedures while minimizing interference to hospital departments.

Determines need for replacement parts and supplies, selects the most cost effective source, and submits properly completed parts request using established policies and guidelines.

Completes corrective and planned maintenance work order documentation per policy.

Promotes teamwork by keeping others informed, participating effectively in group decision making, works to accomplish team objectives and projects, and solicits feedback about one's effectiveness as a team member.

Continually improves processes by seeking ways to eliminate and reduce waste.

Has authority (based on department guidelines)  to order parts and supplies required for emergency service or repair  of medical equipment. Recommends test equipment and spare equipment parts to the CE Manager or Lead Technician.

Provides on-call service coverage after normal business hours on a rotating basis, as assigned.

Provides assistance and training to Bio-Medical Equipment Technician I as assigned by Clinical Engineering Management.

May be assigned duties as Lead Bio-Medical Equipment Technician, as needed.

Performs other duties as assigned or requested by the CE Manager.

Maintains a working knowledge of applicable Federal, State and local laws/regulations; the Trinity Health Integrity and Compliance Program and Code of Conduct; as well as other policies and procedures in order to ensure adherence in a manner that reflects honest, ethical and professional behavior.

Minimum of an Associates of Applied Sciences Degree in related field of medical electronics, electronic technology or equivalent military or related training required.  CBET certification preferred.

Three to five years experience or equivalent, performing corrective and planned maintenance on medical devices and/or clinical support equipment. 

Must have a basic understanding of anatomy, physiology, and medical terminology.

Working knowledge and ability to use basic hand tools and  test equipment specific to the field.  Ability to train CE associates  on use and application of select test equipment.

Must have knowledge and understanding of OSHA, NFPA, The Joint Commission, CAHO, EOC, FDA and other specific regulations and standards pertaining to clinical equipment service and repair.

Must possess a personal presence that is characterized by a sense of honesty, integrity and caring with ability to inspire and motivate others to promote the philosophy, mission, vision, goals and values of Trinity Health, Ministry Organizations, and  Clinical Engineering. 

Ability to operate complex test equipment, analyze and interpret information provided by equipment and clinical staff to determine equipment operational condition.

Must have basic understanding of personal computer operation, applications, and ability to input data using keyboard.  Technician must be able to follow complex written instructions, perform tasks and document actions taken.

 Strong customer service communications skills are required to interact with hospital personnel and vendors to achieve positive outcomes. .

Ability to provide or coordinate in-service training to clinical/professional staff on medical device operations and safety functions.

Must be physically able to balance, bend, climb, crawl, crouch, kneel, reach, sit, squat, stand, twist, and walk.

Possess ability to mentally concentrate while being subject to stress, interruptions and changing work priorities.

Must be able to work and follow OSHA guidelines while in a hazardous environment(s) such as electrocution potentials, mechanical energies, bloodborne/airborne pathogens, dust and inclement weather, marked changes in temperature and/or humidity, radiation, fumes/vapors, sharp instruments/tools, hazardous liquids, and operating devices. 

Must be able to hear speech, distinguish sounds, and speak.

Must have near vision, far vision, depth perception, and be able to distinguish colors.

Must have sensory ability to distinguish hot, cold, range of temperature, surfaces, fine motor skills, manual dexterity, and detect/distinguish odors.

Must be able to carry or lift up to 50 pounds routinely (50% of the time) and on occasion (5% of the time) up to 100 pounds.

Must be able to push or pull over 100 pounds frequently (20% of the time).

Maintains safe working environment for self, other associates, patients, visitors, and medical staff in accordance with applicable standards and procedures relevant to job duties.

Must be able to adapt to frequently changing work priorities.

Must be able to travel to the various Trinity Health, Ministry Organizations, subsidiaries, and/or training facilities.

Our Commitment

Rooted in our Mission and Core Values, we honor the dignity of every person and recognize the unique perspectives, experiences, and talents each colleague brings. By finding common ground and embracing our differences, we grow stronger together and deliver more compassionate, person-centered care. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other status protected by federal, state, or local law.

Provides Planned Maintenance (PM), safety testing, repairs, calibration, installation, routine and emergency service to general diagnostic and therapeutic medical equipment, as assigned by the Clinical Engineering (CE) Manager.

Knows, understands, incorporates and demonstrates the mission, vision and core values of Trinity Health and the Ministry Organization in leadership behaviors, practices and decisions.

Performs PM procedures on multiple types of general and specialized clinical equipment.

Performs PM procedures using manufacturers' recommendations, standards or code requirements, as well as industry acceptable processes as guidelines.

Performs Corrective Maintenance (CM) procedures including diagnosing problems using thermodynamic, electronic/electrical, mechanical, pneumatic, hydraulic, and/or other related sciences and documents results of activities performed to comply with all regulatory and standards requirements.

Notifies equipment users and Clinical Engineering Management of repair status and delays as necessary.

Interacts with clinical staff to understand and resolve operational problems in scheduling and completing PM procedures while minimizing interference to hospital departments.

Determines need for replacement parts and supplies, selects the most cost effective source, and submits properly completed parts request using established policies and guidelines.

Completes corrective and planned maintenance work order documentation.

Promotes teamwork by keeping others informed, participating effectively in group decision making, works to accomplish team objectives and projects, and solicits feedback about one's effectiveness as a team member. 

Continually improves processes by seeking ways to eliminate and reduce waste.

Has authority (based on department guidelines)  to order parts and supplies required for  emergency service or repair of  medical equipment. Recommends test equipment and spare equipment parts to the CE Manager or Lead Technician.

Provides on-call service coverage after normal business hours on a rotating basis, as assigned.

Performs other duties as assigned or requested by CE Manager.

Maintains a working knowledge of applicable Federal, State and local laws/regulations; the Trinity Health Integrity and Compliance Program and Code of Conduct; as well as other policies and procedures in order to ensure adherence in a manner that reflects honest, ethical and professional behavior.

Associates of Applied Sciences degree in medical electronics, electronic technology or related field, including comparable military training or an equivalent combination of education and experience.

One to two-years experience performing corrective and planned maintenance on medical equipment per policy.

Must have a basic understanding of anatomy, physiology, and medical terminology.

Working knowledge and ability to use basic hand tools and test equipment specific to the field. Ability to train CE associates on use and application of select test equipment.

Must have knowledge and understanding of OSHA, NFPA, The Joint Commission, EOC, FDA and other specific regulations and standards pertaining to clinical equipment service and repair.

Must possess a personal presence that is characterized by a sense of honesty, integrity and caring with ability to inspire and motivate others to promote the philosophy, mission, vision, goals and values of Trinity Health, Ministry Organizations, and Clinical Engineering.

Must have basic understanding of personal computer operation, applications, and ability to input data using keyboard.  Technician must be able to  follow complex written instructions, perform tasks and document actions taken.

Ability to operate complex test equipment, analyze and interpret information provided by equipment and clinical staff to determine equipment operational condition.

 Strong customer service and communications skills are required to interact with hospital  personnel and vendors to achieve positive outcomes.

Ability to provide or coordinate in-service training to clinical/professional staff on medical device basic operational and safety functions.

Must be physically able to balance, bend, climb, crawl, crouch, kneel, reach, sit, squat, stand, twist, and walk.

Possess ability to mentally concentrate while being subject to stress, interruptions and changing work priorities.

Must be able to work and follow OSHA guidelines while in a hazardous environment(s) such as electrocution potentials, mechanical energies, bloodborne/airborne pathogens, dust and inclement weather, marked changes in temperature and/or humidity, radiation, fumes/vapors, sharp instruments/tools, hazardous liquids, and operating devices. 

Must be able to hear speech, distinguish sounds, and speak.

Must have near vision, far vision, depth perception, and be able to distinguish colors.

Must have sensory ability to distinguish hot, cold, range of temperature, surfaces, fine motor skills, manual dexterity, and detect/distinguish odors.

Must be able to carry or lift up to 50 pounds routinely (50% of the time) and on occasion (5% of the time) up to 100 pounds.

Must be able to push or pull over 100 pounds frequently (20% of the time).

Maintains safe working environment for self, other associates, patients, visitors, and medical staff in accordance with applicable standards and procedures relevant to  job duties.

Must be able to adapt to frequently changing work priorities.

Must be able to travel to the various Trinity Health, Ministry Organizations, subsidiaries, and/or training facilities.

Our Commitment

Rooted in our Mission and Core Values, we honor the dignity of every person and recognize the unique perspectives, experiences, and talents each colleague brings. By finding common ground and embracing our differences, we grow stronger together and deliver more compassionate, person-centered care. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other status protected by federal, state, or local law.

Provides Planned Maintenance (PM), safety testing, repairs, calibration, installation, routine and emergency service to general and various specialized diagnostic and therapeutic medical equipment, as assigned by the Clinical Engineering (CE) Manager.

Knows, understands, incorporates and demonstrates the mission, vision and core values of Trinity Health and the Ministry Organization in leadership behaviors, practices and decisions.

Performs PM procedures on multiple types of general and specialized clinical equipment.

Performs PM procedures using manufacturer’s recommendations, standards or code requirements, as well as industry acceptable processes as guidelines.

Performs corrective maintenance procedures including diagnosing problems using thermodynamic, electronic/electrical, mechanical, pneumatic, hydraulic, and/or other sciences and documents results of activities performed to comply with all regulatory and standard requirements.

Notifies equipment users, CE Managers, and Regional Director of repair status and delays as necessary.

Interacts with clinical staff to understand and resolve operational problems in scheduling and completing PM procedures while minimizing interference to hospital departments.

Determines need for replacement parts and supplies, selects the most cost effective source, and submits properly completed parts request using established policies and guidelines.

Completes corrective and planned maintenance work order documentation per policy.

Promotes teamwork by keeping others informed, participating effectively in group decision making, works to accomplish team objectives and projects, and solicits feedback about one's effectiveness as a team member.

Continually improves processes by seeking ways to eliminate and reduce waste.

Has authority (based on department guidelines)  to order parts and supplies required for emergency service or repair  of medical equipment. Recommends test equipment and spare equipment parts to the CE Manager or Lead Technician.

Provides on-call service coverage after normal business hours on a rotating basis, as assigned.

Provides assistance and training to Bio-Medical Equipment Technician I as assigned by Clinical Engineering Management.

May be assigned duties as Lead Bio-Medical Equipment Technician, as needed.

Performs other duties as assigned or requested by the CE Manager.

Maintains a working knowledge of applicable Federal, State and local laws/regulations; the Trinity Health Integrity and Compliance Program and Code of Conduct; as well as other policies and procedures in order to ensure adherence in a manner that reflects honest, ethical and professional behavior.

Associates of Applied Sciences degree in medical electronics, electronic technology or related field, including comparable military training or an equivalent combination of education and experience. CBET certification preferred.

Three (3) to five (5) years' experience  performing corrective and planned maintenance on medical devices and/or clinical support equipment. 

Must have a basic understanding of anatomy, physiology, and medical terminology.

Working knowledge and ability to use basic hand tools and  test equipment specific to the field.  Ability to train CE associates  on use and application of select test equipment.

Must have knowledge and understanding of OSHA, NFPA, The Joint Commission, CAHO, EOC, FDA and other specific regulations and standards pertaining to clinical equipment service and repair.

Must possess a personal presence that is characterized by a sense of honesty, integrity and caring with ability to inspire and motivate others to promote the philosophy, mission, vision, goals and values of Trinity Health, Ministry Organizations, and  Clinical Engineering. 

Ability to operate complex test equipment, analyze and interpret information provided by equipment and clinical staff to determine equipment operational condition.

Must have basic understanding of personal computer operation, applications, and ability to input data using keyboard.  Technician must be able to follow complex written instructions, perform tasks and document actions taken.

 Strong customer service communications skills are required to interact with hospital personnel and vendors to achieve positive outcomes. .

Ability to provide or coordinate in-service training to clinical/professional staff on medical device operations and safety functions.

Must be physically able to balance, bend, climb, crawl, crouch, kneel, reach, sit, squat, stand, twist, and walk.

Possess ability to mentally concentrate while being subject to stress, interruptions and changing work priorities.

Must be able to work and follow OSHA guidelines while in a hazardous environment(s) such as electrocution potentials, mechanical energies, bloodborne/airborne pathogens, dust and inclement weather, marked changes in temperature and/or humidity, radiation, fumes/vapors, sharp instruments/tools, hazardous liquids, and operating devices. 

Must be able to hear speech, distinguish sounds, and speak.

Must have near vision, far vision, depth perception, and be able to distinguish colors.

Must have sensory ability to distinguish hot, cold, range of temperature, surfaces, fine motor skills, manual dexterity, and detect/distinguish odors.

Must be able to carry or lift up to 50 pounds routinely (50% of the time) and on occasion (5% of the time) up to 100 pounds.

Must be able to push or pull over 100 pounds frequently (20% of the time).

Maintains safe working environment for self, other associates, patients, visitors, and medical staff in accordance with applicable standards and procedures relevant to job duties.

Must be able to adapt to frequently changing work priorities.

Must be able to travel to the various Trinity Health, Ministry Organizations, subsidiaries, and/or training facilities.

Our Commitment

Rooted in our Mission and Core Values, we honor the dignity of every person and recognize the unique perspectives, experiences, and talents each colleague brings. By finding common ground and embracing our differences, we grow stronger together and deliver more compassionate, person-centered care. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other status protected by federal, state, or local law.

Provides Planned Maintenance (PM), safety testing, repairs, calibration, installation, routine and emergency service to general and various specialized diagnostic and therapeutic medical equipment, as assigned by the Clinical Engineering (CE) Manager.

Knows, understands, incorporates and demonstrates the mission, vision and core values of Trinity Health and the Ministry Organization in leadership behaviors, practices and decisions.

Performs PM procedures on multiple types of general and specialized clinical equipment.

Performs PM procedures using manufacturer’s recommendations, standards or code requirements, as well as industry acceptable processes as guidelines.

Performs corrective maintenance procedures including diagnosing problems using thermodynamic, electronic/electrical, mechanical, pneumatic, hydraulic, and/or other sciences and documents results of activities performed to comply with all regulatory and standard requirements.

Notifies equipment users, CE Managers, and Regional Director of repair status and delays as necessary.

Interacts with clinical staff to understand and resolve operational problems in scheduling and completing PM procedures while minimizing interference to hospital departments.

Determines need for replacement parts and supplies, selects the most cost effective source, and submits properly completed parts request using established policies and guidelines.

Completes corrective and planned maintenance work order documentation per policy.

Promotes teamwork by keeping others informed, participating effectively in group decision making, works to accomplish team objectives and projects, and solicits feedback about one's effectiveness as a team member.

Continually improves processes by seeking ways to eliminate and reduce waste.

Has authority (based on department guidelines)  to order parts and supplies required for emergency service or repair  of medical equipment. Recommends test equipment and spare equipment parts to the CE Manager or Lead Technician.

Provides on-call service coverage after normal business hours on a rotating basis, as assigned.

Provides assistance and training to Bio-Medical Equipment Technician I as assigned by Clinical Engineering Management.

May be assigned duties as Lead Bio-Medical Equipment Technician, as needed.

Performs other duties as assigned or requested by the CE Manager.

Maintains a working knowledge of applicable Federal, State and local laws/regulations; the Trinity Health Integrity and Compliance Program and Code of Conduct; as well as other policies and procedures in order to ensure adherence in a manner that reflects honest, ethical and professional behavior.

Associates of Applied Sciences degree in medical electronics, electronic technology or related field, including comparable military training or an equivalent combination of education and experience. CBET certification preferred.

Three (3) to five (5) years' experience  performing corrective and planned maintenance on medical devices and/or clinical support equipment. 

Must have a basic understanding of anatomy, physiology, and medical terminology.

Working knowledge and ability to use basic hand tools and  test equipment specific to the field.  Ability to train CE associates  on use and application of select test equipment.

Must have knowledge and understanding of OSHA, NFPA, The Joint Commission, CAHO, EOC, FDA and other specific regulations and standards pertaining to clinical equipment service and repair.

Must possess a personal presence that is characterized by a sense of honesty, integrity and caring with ability to inspire and motivate others to promote the philosophy, mission, vision, goals and values of Trinity Health, Ministry Organizations, and  Clinical Engineering. 

Ability to operate complex test equipment, analyze and interpret information provided by equipment and clinical staff to determine equipment operational condition.

Must have basic understanding of personal computer operation, applications, and ability to input data using keyboard.  Technician must be able to follow complex written instructions, perform tasks and document actions taken.

 Strong customer service communications skills are required to interact with hospital personnel and vendors to achieve positive outcomes. .

Ability to provide or coordinate in-service training to clinical/professional staff on medical device operations and safety functions.

Must be physically able to balance, bend, climb, crawl, crouch, kneel, reach, sit, squat, stand, twist, and walk.

Possess ability to mentally concentrate while being subject to stress, interruptions and changing work priorities.

Must be able to work and follow OSHA guidelines while in a hazardous environment(s) such as electrocution potentials, mechanical energies, bloodborne/airborne pathogens, dust and inclement weather, marked changes in temperature and/or humidity, radiation, fumes/vapors, sharp instruments/tools, hazardous liquids, and operating devices. 

Must be able to hear speech, distinguish sounds, and speak.

Must have near vision, far vision, depth perception, and be able to distinguish colors.

Must have sensory ability to distinguish hot, cold, range of temperature, surfaces, fine motor skills, manual dexterity, and detect/distinguish odors.

Must be able to carry or lift up to 50 pounds routinely (50% of the time) and on occasion (5% of the time) up to 100 pounds.

Must be able to push or pull over 100 pounds frequently (20% of the time).

Maintains safe working environment for self, other associates, patients, visitors, and medical staff in accordance with applicable standards and procedures relevant to job duties.

Must be able to adapt to frequently changing work priorities.

Must be able to travel to the various Trinity Health, Ministry Organizations, subsidiaries, and/or training facilities.

Our Commitment

Rooted in our Mission and Core Values, we honor the dignity of every person and recognize the unique perspectives, experiences, and talents each colleague brings. By finding common ground and embracing our differences, we grow stronger together and deliver more compassionate, person-centered care. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other status protected by federal, state, or local law.

Provides Planned Maintenance (PM), safety testing, repairs, calibration, installation, routine and emergency service to general and various specialized diagnostic and therapeutic medical equipment, as assigned by the Clinical Engineering (CE) Manager.

Knows, understands, incorporates and demonstrates the mission, vision and core values of Trinity Health and the Ministry Organization in leadership behaviors, practices and decisions.

Performs PM procedures on multiple types of general and specialized clinical equipment.

Performs PM procedures using manufacturer’s recommendations, standards or code requirements, as well as industry acceptable processes as guidelines.

Performs corrective maintenance procedures including diagnosing problems using thermodynamic, electronic/electrical, mechanical, pneumatic, hydraulic, and/or other sciences and documents results of activities performed to comply with all regulatory and standard requirements.

Notifies equipment users, CE Managers, and Regional Director of repair status and delays as necessary.

Interacts with clinical staff to understand and resolve operational problems in scheduling and completing PM procedures while minimizing interference to hospital departments.

Determines need for replacement parts and supplies, selects the most cost effective source, and submits properly completed parts request using established policies and guidelines.

Completes corrective and planned maintenance work order documentation per policy.

Promotes teamwork by keeping others informed, participating effectively in group decision making, works to accomplish team objectives and projects, and solicits feedback about one's effectiveness as a team member.

Continually improves processes by seeking ways to eliminate and reduce waste.

Has authority (based on department guidelines)  to order parts and supplies required for emergency service or repair  of medical equipment. Recommends test equipment and spare equipment parts to the CE Manager or Lead Technician.

Provides on-call service coverage after normal business hours on a rotating basis, as assigned.

Provides assistance and training to Bio-Medical Equipment Technician I as assigned by Clinical Engineering Management.

May be assigned duties as Lead Bio-Medical Equipment Technician, as needed.

Performs other duties as assigned or requested by the CE Manager.

Maintains a working knowledge of applicable Federal, State and local laws/regulations; the Trinity Health Integrity and Compliance Program and Code of Conduct; as well as other policies and procedures in order to ensure adherence in a manner that reflects honest, ethical and professional behavior.

Associates of Applied Sciences degree in medical electronics, electronic technology or related field, including comparable military training or an equivalent combination of education and experience. CBET certification preferred.

Three (3) to five (5) years' experience  performing corrective and planned maintenance on medical devices and/or clinical support equipment. 

Must have a basic understanding of anatomy, physiology, and medical terminology.

Working knowledge and ability to use basic hand tools and  test equipment specific to the field.  Ability to train CE associates  on use and application of select test equipment.

Must have knowledge and understanding of OSHA, NFPA, The Joint Commission, CAHO, EOC, FDA and other specific regulations and standards pertaining to clinical equipment service and repair.

Must possess a personal presence that is characterized by a sense of honesty, integrity and caring with ability to inspire and motivate others to promote the philosophy, mission, vision, goals and values of Trinity Health, Ministry Organizations, and  Clinical Engineering. 

Ability to operate complex test equipment, analyze and interpret information provided by equipment and clinical staff to determine equipment operational condition.

Must have basic understanding of personal computer operation, applications, and ability to input data using keyboard.  Technician must be able to follow complex written instructions, perform tasks and document actions taken.

 Strong customer service communications skills are required to interact with hospital personnel and vendors to achieve positive outcomes. .

Ability to provide or coordinate in-service training to clinical/professional staff on medical device operations and safety functions.

Must be physically able to balance, bend, climb, crawl, crouch, kneel, reach, sit, squat, stand, twist, and walk.

Possess ability to mentally concentrate while being subject to stress, interruptions and changing work priorities.

Must be able to work and follow OSHA guidelines while in a hazardous environment(s) such as electrocution potentials, mechanical energies, bloodborne/airborne pathogens, dust and inclement weather, marked changes in temperature and/or humidity, radiation, fumes/vapors, sharp instruments/tools, hazardous liquids, and operating devices. 

Must be able to hear speech, distinguish sounds, and speak.

Must have near vision, far vision, depth perception, and be able to distinguish colors.

Must have sensory ability to distinguish hot, cold, range of temperature, surfaces, fine motor skills, manual dexterity, and detect/distinguish odors.

Must be able to carry or lift up to 50 pounds routinely (50% of the time) and on occasion (5% of the time) up to 100 pounds.

Must be able to push or pull over 100 pounds frequently (20% of the time).

Maintains safe working environment for self, other associates, patients, visitors, and medical staff in accordance with applicable standards and procedures relevant to job duties.

Must be able to adapt to frequently changing work priorities.

Must be able to travel to the various Trinity Health, Ministry Organizations, subsidiaries, and/or training facilities.

Our Commitment

Rooted in our Mission and Core Values, we honor the dignity of every person and recognize the unique perspectives, experiences, and talents each colleague brings. By finding common ground and embracing our differences, we grow stronger together and deliver more compassionate, person-centered care. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other status protected by federal, state, or local law.

Job Title: Unit General Manager I F&B

Department: Operations

Reports To: Senior Leadership (Site General Manager, Director of Operations, Plaza Director)

Status: Exempt

Date: May 2025

Broad Responsibilities:

Lead and oversee all aspects of airport operations business by driving exceptional results, establishing and maintaining company culture, and managing key client relationships. Hold full accountability for achieving financial, operational, and guest service objectives while creating and sustaining a best-in-class work environment. Develop and implement strategic training initiatives and provide leadership to all personnel to ensure consistent delivery of premium service that exceeds Food and Beverage standards and company policies and procedures. Direct and mentor the management team to achieve operational excellence and foster professional growth.

Main Duties & Responsibilities:

1. Follow all policies, procedures, standards, specifications, guidelines, and training programs.
2. Oversee food usage and verify and oversees reconciliation process for deliveries.
3. Resolve immediate customer concerns about food quality or service following company standards.
4. Maintain sanitation standards throughout shifts and complete required documentation.
5. Supervise staff during shifts to ensure health and safety standards and liquor regulations (where applicable) are followed according to state and local guidelines.
6. Complete shift-related paperwork, including forms and reports in a timely manner.
7. Monitor and report supply levels for tableware, cooking utensils and cleaning items.
8. Report maintenance and repair needs for equipment and facilities.
9. Execute opening and closing procedures and maintain security standards.
10. Provide feedback on team member performance.
11. Make employment and termination recommendation consistent with company guidelines
12. Monitor staff compliance with company dress code guidelines.
13. Assist with on-the-job training for new team members.
14. Monitor food preparation and methods to ensure compliance with brand and company specification and standards.
15. Forecast labor and staff schedule appropriately as business dictates in compliance with CBS if applicable.
16. Responsible for onboarding and continued development of associates assigned to their concept.
17. Perform any other duties as assigned by supervisor

Skills and Qualifications

1. High School Diploma or equivalent required.
2. 2+ years restaurant management.
3. Basic communication skills.
4. Ability to organize shift-level tasks.
5. Strong customer service skills.
6. Understanding of basic business patterns.
7. Ability to work effectively with a diverse workforce.
8. Familiarity with inventory management basics.
9. Emerging leadership ability and team motivation skills.
10. Basic understanding of sales, labor costs, and food costs.
11. Ability to work under pressure.
12. Able to work a flexible work schedule including weekends and holidays.

Physical Demands:

The physical demands described here are representative of those that must be met by an associate to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

While performing the duties of this job, the associate is regularly required to stand for long periods of time, use hands and fingers, communicate verbally, and hear. The associate is frequently required to reach with hands and arms, climb, balance, taste, and smell. The associate is also occasionally required to walk, stoop, kneel, crouch, crawl, and either lift or move up to 35 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to focus.

Benefits:

We offer full-time eligible employees affordable medical insurance, dental and vision benefits, along with a variety of voluntary insurance options. Our benefits package includes company-sponsored life insurance, a free employee assistance program, competitive paid time off, company holidays, and a 401k retirement plan with company match. Plus, enjoy access to discount programs for travel and entertainment. This position is eligible for a bonus.

EEOC Statement:

We are an equal opportunity employer committed to building a diverse team and fostering an inclusive environment where employees feel empowered to bring their authentic selves to work. We welcome applications from all qualified candidates regardless of race, color, religion, gender identity, sexual orientation, national origin, age, disability status, or veteran status.

Appraisal Analyst – HELOC’s and Mortgage

Fulltime

In the Appraisal Analyst role, you will review the Desktop Exterior and Desktop Interior assessments to evaluate and sign off on a property’s valuation for a large bank in the US. When taking a decision about a property’s valuation, you will ensure compliance with Federal/State laws to ensure that loans that are secured with real estate are protected with adequate collateral value.

In the role of Process Specialist, you will execute transactions as per prescribed guidelines and timelines, review and validate the inputs from the other team members, support your manager in training activities, daily operations reviews, and help in escalation resolution with the objective to meet service level agreement targets for the specific process within the guidelines, policies, and norms of Infosys.

Responsibilities and Duties

Responsible for reviewing property valuations to ensure compliance with Federal/state law to ensure that loans secured with real estate and protected with adequate collateral value.

Other duties may be performed, both major and minor, which are not mentioned below. Specific activities may change from time to time.

• Successfully use critical thinking and analytical skills to review collaterals
• Develop and maintain a strong understanding of Mortgage Lending products, policies, processes, and their collateral requirements.
• Obtain required collateral documentation per program requirements from internal clients, external clients, vendors, and third-party sources.
• Perform a detailed review of all collateral documentation to ensure that loans meet portfolio and investor guidelines.
• Identify and escalate collateral issues to the appropriate teammate for further evaluation.
• Consistently communicate with other departments and sales to ensure pipeline metrics and quality guidelines are met.
• Adhere to all compliance regulations and controls.
• Develop and maintain positive working relationships with co-workers, internal and external clients, business partners, and vendors.

Qualifications

Basic

• High School Diploma or GED equivalent
• At least 2 years of relevant work experience

Qualifications Preferred

The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions.

• Two to three years of mortgage or consumer lending experience
• Two to three years of continuous collateral review and approval experience
• Excellent Communication skills, both written and verbal, in relating to internal and external clients
• Demonstrates proficiency in basic computer applications such as Microsoft Office software product
• Understanding of appraisal compliance and generally accepted appraisal rules
• Experience with using appraisal and market evaluation tools
• Demonstrates proficiency in mortgage automated processing systems
• Basic knowledge of bank services and products

Note: Applicants for employment in the U.S. must possess work authorization, which does not require sponsorship by the employer for a visa (H1B or otherwise).

The job entails sitting as well as working at a computer for extended periods. Should be able to communicate by telephone, email, or face-to-face.

About Us

Infosys BPM Limited, a wholly owned subsidiary of Infosys Limited (NYSE: INFY), provides end-to-end transformative business process management (BPM) services for its clients across the globe. The company’s integrated IT and BPM solutions approach enables it to unlock business value across industries and service lines, and address business challenges for its clients. Utilizing innovative business excellence frameworks, ongoing productivity improvements, process reengineering, automation, and cutting-edge technology platforms, Infosys BPM enables its clients to achieve their cost reduction objectives, improve process efficiencies, enhance effectiveness, and deliver superior customer experience.

Infosys BPM has 44 delivery centers in 16 countries spread across 5 continents, with 59,443 employees from 108 nationalities, as of March, 2025.

The company has been consistently ranked among the leading BPM companies globally and has received over 60 awards and recognitions in the last 5 years, from key industry bodies and associations like the Outsourcing Center, SSON, and GSA, among others. Infosys BPM also has very robust people’s practices, as substantiated by the various HR-specific awards it has won over the years. The company has consistently been ranked among the top employers of choice, on the basis of its industry leading HR best practices. The company’s senior leaders contribute widely to industry forums as BPM strategists.

EOE/Minority/Female/Veteran/Disabled/Sexual Orientation/Gender Identity/National Origin

Infosys is an equal opportunity employer and all qualified applicants will receive consideration without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status, spouse of protected veteran, or disability.

Are you passionate about inspiring the next generation of beauty and wellness leaders? Would you love to be part of those “light bulb moments” with students? From the classroom to the clinic floor, our educators make a lasting impact every day. At Aveda Institute Des Moines, we teach more than just skills - we're committed to developing future leaders in the world of beauty and wellness!

Who We Are:

Do What You Love – Love What You Do. Founded in 2004, Nurtur Aveda is a community of professionals dedicated to environmental responsibility and developing future leaders in the world of beauty and wellness.

Responsibilities:

• Uphold the Nurtur Core Values and Behaviors and Aveda Success Factors
• Demonstrate a strong understanding that the salon/spa industry is “high touch” and requires strong interpersonal skills and attention to the needs of others
• Provide ongoing recognition, support, and motivation for students and peers
• Serve as a role model by communicating and enforcing policies and procedures, safety, sanitation and security standards, the Code of Conduct, and the dress code
• Help maintain a cohesive, cooperative work environment through team building and motivation
• Work continuously to create and nurture strong working relationships with others
• Effectively implement and sustain Aveda curriculum initiatives in course curriculum and service cycle on the clinic floor
• Prepare lesson plans in advance, in a way that reflects current industry standards and is in line with approved education materials
• Actively engage students in their education through demonstrations, activities and interactive teaching
• Continually check with students for understanding of subject matter and adjust teaching methods to ensure all students are active participants
• Coach students to meet service and retail goals; educate students on products
• Utilize clinic floor and classroom processes according to Institute guidelines and timeframes; ensure safe and sanitary practices by students when practicing or demonstrating technique
• Ensure that all waste materials are recycled in the proper fashion as dictated by local laws and Company guidelines
• Consistently apply Aveda technical standards at all times
• Partner with Director and Education Manager to ensure compliance with all NACCAS and State Board regulations
• Assist with ensuring strong student outcomes including graduation 90%, licensure 95% and placement 90%
• Maintain academic records consistent with Institute guidelines and ensure all grades are recorded and turned into the Student Success team within each phase of the program; ensure continuous evaluation is given to students regarding performance in theory, practical, clinic floor experiences, etc.
• Ensure you communicate all student challenges to all members of leadership, collaborate and work towards a solution
• Enforce policies and procedures set forth in the Student Handbook; ensure that students comply with Institute set directives; follow and help implement all branded visual presentation standards and guidelines
• Address student challenges in an effective and timely manner; counsel and assist students in resolving issues
• Ensure Aveda Rituals are performed on every guest; demonstrate an understanding of the actions, values, and behaviors that constitute a strong guest care culture
• Identify and resolve guest and student issues and/or requests in an efficient and timely manner
• Schedule and pre-book guest appointments as needed
• Work closely with other team members and students to achieve service and retail sales goals; take initiative and accountability for the accuracy of information and for achieving results
• Motivate self and others to overcome obstacles and achieve goals
• Actively participate in Institute events and encourage participation from team members, guests, and students in all Institute events
• Attend conference calls, meetings, and training sessions as required
• Attend at least four (12) hours of continuing instructor education every year, which includes 4 hours of teaching methodology
• Perform duties as assigned and/or required to meet business needs
• Abide by all other Nurtur policies and procedures as outlined in the Team Member Handbook and Code of Conduct

Requirements:

• High school diploma or GED equivalent
• Valid state-issued Cosmetology license and the maintenance of such license and continuing education hours
• Minimum of 2 years’ continuous cosmetology experience in a salon required; experience in training staff highly preferred
• Exhibit leadership, time management, organization, self-direction, initiative, resourcefulness, and follow-through with the ability to work at a fast pace and handle multiple tasks and projects at the same time
• Excellent interpersonal, communication, and presentation skills
• Demonstrate extreme professionalism and confidentiality in manner, dress, and conduct
• Ability to set and achieve goals, implement decisions, and work under strict deadlines
• Strong commitment to customer service excellence and to the Company’s mission and vision

Physical Demands and Work Environment:

• Walk, stand up, and/or sit for up to twelve (12) hours per day
• Use hands to handle objects and reach with hands and arms
• Walk, sit, stand, balance, stoop, speak, and hear
• See a computer screen and read paper and electronic documents
• Occasionally lift and/or move objects up to 30 pounds
• Tolerate a minimal to moderate noise level typical of a school environment

Perks and Benefits:

• Medical/Dental/Vision/Life
• 401(k)/match
• PTO (paid time off)
• EAP (employee assistance program)
• Short-term disability
• Employee discount on products and services
• Growth Opportunities

Travel Requirements: The team member in this position must be able to travel locally to events and for out-of-state training and events as necessary.

Equal Opportunity Employer:

Nurtur Holdings LLC (including its affiliated organizations) is an Equal Opportunity Employer. All employees and applicants are covered by federal and state laws designed to safeguard employees and job applicants from discrimination on the basis of race, color, religion, sex (including pregnancy, gender identity, and sexual orientation), parental status, national origin, age, disability, genetic information, military service, or other non-merit-based factors. Consistent with these obligations, Nurtur also provides reasonable accommodations to employees and applicants with disabilities and for sincerely held religious beliefs, observances, and practices.

If you've ever thought about sharing your skills and experience with others, here's your opportunity. Apply today!

No time off during training period.

+  The training timeframe for UW EQ 02_2026 is from 4/13 - 5/1(No Time Off). 

• Title : Real Estate Lending – Specialist / Mortgage Underwriter
• Start Date: 4/13/2026
• Schedule Type: Hybrid with the expectation to report onsite a minimum of 2 days per week (Ensuring to meet company Hybrid Guidelines)
  • Hybrid expectations change April 2026 to a minimum of 3 days per week onsite however 2 days per week will be required until the anticipated change in policy
• Shift (Time): 8:00am – 4:30pm (local time)
• Overtime : Overtime will be available when there is a business need

Job Description:

• Per the Business Unit: Applicants must have UW experience. Experience in Equity Underwriting would be beneficial as well, but this can be trained if they have UW experience.

Job Description:

• Extensive Mortgage Underwriting or Loan Processing experience. Analyze loans to make a valid recommendation.
• True underwriting experience, calculating income and/or VA SAR ability. 
• Ability to do a manual underwrite 
• The system pulls red flags to deny loans; ex. Credit, income liabilities etc. they get about 300-400 per day. This team would manage that specific case load, identify which ones have the potential to clear and pass it along to a higher-level UW.
• Review collected documentation against company, NCUA, USPAP and all other relevant industry loan acceptance guidelines
• Review contracts related to real estate, such as age restrictions, HOAs, etc.
• Work closely and collaborate with loan originator and processor to ensure all appropriate data is obtained
• Collaborate with Mortgage leadership and participate in mentoring sessions for Mortgage Processors, Mortgage Closers, and Mortgage Loan Officers
• Maintain current knowledge of all company mortgage products and any changes to guidelines by company, investor, or government agencies that impact the processing of mortgage loan products

Additional Skills & Qualifications:

· Must have at least 1 year of Mortgage Underwriting experience

· Knowledgeable of the Mortgage Industry

· Familiar with agency guidelines i.e. Fannie, Freddie, VA

· Ability to quickly adjust

· Quick decision making

· Comfortable with conditions, especially DU conditions

· Familiar with/ability to calculate income

· Experience reviewing CBRs

· Experience in a production-based environment

Top Skills Details:

Conventional, FHA, VA, desktop underwriter/processing experience (certifications are preferred, not required)

Work environment:

Hybrid Remote

#eastpriority26

#priorityeast

This is a Contract to Hire position based out of North Richland Hills, TX.

The pay range for this position is $22.02 - $39.93/hr.

Eligibility requirements apply to some benefits and may depend on your job

classification and length of employment. Benefits are subject to change and may be

subject to specific elections, plan, or program terms. If eligible, the benefits

available for this temporary role may include the following:

• Medical, dental & vision
• Critical Illness, Accident, and Hospital
• 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available
• Life Insurance (Voluntary Life & AD&D for the employee and dependents)
• Short and long-term disability
• Health Spending Account (HSA)
• Transportation benefits
• Employee Assistance Program
• Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type

This is a hybrid position in North Richland Hills,TX.

This position is anticipated to close on Mar 20, 2026.

Were partners in transformation. We help clients activate ideas and solutions to take advantage of a new world of opportunity. We are a team of 80,000 strong, working with over 6,000 clients, including 80% of the Fortune 500, across North America, Europe and Asia. As an industry leader in Full-Stack Technology Services, Talent Services, and real-world application, we work with progressive leaders to drive change. Thats the power of true partnership. TEKsystems is an Allegis Group company.

The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

We’re a leading provider of business and technology services. We accelerate business transformation for our customers. Our expertise in strategy, design, execution and operations unlocks business value through a range of solutions. We’re a team of 80,000 strong, working with over 6,000 customers, including 80% of the Fortune 500 across North America, Europe and Asia, who partner with us for our scale, full-stack capabilities and speed. We’re strategic thinkers, hands-on collaborators, helping customers capitalize on change and master the momentum of technology. We’re building tomorrow by delivering business outcomes and making positive impacts in our global communities. TEKsystems and TEKsystems Global Services are Allegis Group companies. Learn more at .

The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.