Mphc Cause List Jobs in Usa
4,184 positions found — Page 5
Location: Bristol, PA
Pay: $31.50 - 45/hr (DOE)
Type: Contract to hire
Responsibilities
- Reviews and approves analytical method qualification protocols, reports, test methods, and related QC/Analytical Development documentation.
- Performs QA review and approval of equipment onboarding and qualification records (URS, IQ, OQ, PQ, maintenance).
- Reviews incoming raw material documentation and supports QA disposition activities.
- Supports deviations, OOS/OOT investigations, and cross‑functional root cause analyses.
- Provides on‑the‑floor QA support during GMP manufacturing operations and real‑time issue escalation.
- Reviews and approves GMP documents (e.g., master and executed batch records, SOPs) for accuracy, completeness, and compliance.
- Contributes to Quality System records (Deviations, CAPAs, Change Controls, Laboratory Investigations) as a reviewer or investigator.
- Collaborates with Manufacturing, QC, Analytical Development, and Engineering to support compliant and efficient GMP operations.
- Adheres to internal procedures and applicable GMP regulatory requirements.
- Contributes to site quality initiatives, operational efficiency projects, and activities related to technology transfer and commercialization.
- Assists other Quality groups as needed, including document control, training, and audits.
- Communicates effectively with supervisors, colleagues, and teams.
- Adheres to regulatory and Abzena quality standards, policies, procedures, and mission.
- Maintain the highest ethical and moral standards
Qualifications/ Skills Required:
- Bachelor's degree in science or engineering or equivalent with 5-8 years of relevant experience in the Pharmaceutical, Biologic, Biotechnology, or Medical Device space.
- Relevant experience as in Quality Assurance, Quality Systems, Quality Compliance, Quality Control, GMP manufacturing and testing.
- Experienced in leading Root Cause Analysis investigations, developing corrective actions, and performing risk assessments.
- Experienced in early-phase to commercial quality systems development and maintenance.
- Adequate knowledge of industry standards and regulation requirements for biologics and small molecules in clinical development and commercial.
- Adequate knowledge of GMP regulations (e.g. US, EU, and ROW), good documentation practices, cGMP, 21CFR Part 210 and 211, USP and other applicable regulations, standards, and guidance.
Physical Requirements:
- Ability to stand for 1-2 hours at a time, sit for 2 to 3 hours at a time.
- Require working in an office setting where sitting and computer usage would be the norm
#IND-SPG
Estimated Min Rate: $31.50
Estimated Max Rate: $45.00
What’s In It for You?
We welcome you to be a part of the largest and legendary global staffing companies to meet your career aspirations. Yoh’s network of client companies has been employing professionals like you for over 65 years in the U.S., UK and Canada. Join Yoh’s extensive talent community that will provide you with access to Yoh’s vast network of opportunities and gain access to this exclusive opportunity available to you. Benefit eligibility is in accordance with applicable laws and client requirements. Benefits include:
- Medical, Prescription, Dental & Vision Benefits (for employees working 20+ hours per week)
- Health Savings Account (HSA) (for employees working 20+ hours per week)
- Life & Disability Insurance (for employees working 20+ hours per week)
- MetLife Voluntary Benefits
- Employee Assistance Program (EAP)
- 401K Retirement Savings Plan
- Direct Deposit & weekly epayroll
- Referral Bonus Programs
- Certification and training opportunities
Note: Any pay ranges displayed are estimations. Actual pay is determined by an applicant's experience, technical expertise, and other qualifications as listed in the job description. All qualified applicants are welcome to apply.
Yoh, a Day & Zimmermann company, is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.
Visit to contact us if you are an individual with a disability and require accommodation in the application process.
For California applicants, qualified applicants with arrest or conviction records will be considered for employment in accordance with the Los Angeles County Fair Chance Ordinance for Employers and the California Fair Chance Act. All of the material job duties described in this posting are job duties for which a criminal history may have a direct, adverse, and negative relationship potentially resulting in the withdrawal of a conditional offer of employment.
It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.
By applying and submitting your resume, you authorize Yoh to review and reformat your resume to meet Yoh’s hiring clients’ preferences. To learn more about Yoh’s privacy practices, please see our Candidate Privacy Notice:
Company Description
Tarr, LLC is a full-service independent distributor of chemicals, dedicated to superior service and innovation. Headquartered in Portland, Oregon, with additional facilities in the Pacific Northwest and Phoenix, the company provides tailored solutions to customers across the western U.S. and the Pacific Rim. Tarr delivers 95% of orders through its own fleet, ensuring efficiency and reliability. As a founding member of OmniChem and an ISO 9001:2015 certified organization, Tarr prioritizes quality and environmental safety. With over half a century of expertise, Tarr remains committed to being a leading independent chemical distributor on the West Coast.
Role Description
Perform duties necessary to monitor accurate tracking and valuation of product inventory. Includes other duties related to inventory consisting of reporting, analysis, and support and training for other staff.
Duties and Responsibilities
- Responsible for managing the Inventory Master file and ensuring compliance to policy and procedure. Reviewing for consistency and identification of discontinued products.
- System Administration for the Warehousing and Manufacturing Modules of the ERP.
- Data Extraction from ERP System for Inventory Transactions and Troubleshooting.
- Set up of new process in ERP system for tracking of Inventory. System enhancements, updates, and conversions.
- Prepares and directs routine cycle counts of specific inventory products and consumable supply items. This includes all ethanol inventories required for external reporting compliance at least monthly.
- Directs full physical count of all inventories (Finished Good, Raw Materials, Packaging, and Consumable Supply Items) on a scheduled basis. Reconciles physical count to perpetual count in accounting system. Requires travel to facilities.
- Research with operations reported or identified inventory discrepancies to determine root cause and process improvements for product quantities and costing.
- Responsible to determine the need to make adjusting transactions to correct inventory balances, correcting either on hand quantities and/or average cost as needed, ensuring lot numbers and representation in transaction history is properly documented.
- Prepares and reviews the Dead Stock/Slow Moving/NC Report and works with operations to formulate a game plan for the use or disposal of the products.
- Responsible for maintenance of product formulas and their revisions in the ERP system at the direction of production, sales, and/or quality control. This includes the listing of specific work instructions and process/product related notations.
- Responsible for understanding tracking and reporting requirements of TTB and preparation of monthly ethanol flow reports.
- Sets up new products, blend products and packaging items applying standard procedures for required fields in ERP system. Verifies that existing product codes do not already exist and explores other options like the addition of a formula version or a customer-product as an alternative. Distributes product information and product codes to sales, purchasing, compliance and customer service.
- Routinely reviews labor and overhead costing rates and application to production formulas. Through observation and discussion with operations and sales personnel, tracks and analyze the labor, analytical costs, other consumable elements associated with completion of production activities.
- Confers and coordinates with CFO and other interested parties to prepare for absorption rate changes.
- Provides training, support and backup as needed to employees interacting with inventory transactions from Receiving to Invoicing, and product returns for all facilities.
- Audits inventory related transactions to ensure proper recording in system, to include receivers, production posting, location transfers, lot identification and labeling.
- Works with various departments, including Purchasing, Production, Accounts Payable and General Ledger to resolve inventory processing questions and issues.
- Conduct root cause analysis to identify when more information is required and where processes can be improved.
- Assists Sales and Management with various reports and information when needed for gross margin impact.
- Monthly Inv Variance/PPV/Disposal/Freight Variance Recons
- Must comply with all company safety, quality and environmental standards.
- Works within the Tarr Systems Manual built upon the framework of ISO 9001 Quality Management System and Responsible Distribution Process requirements.
- Performs other duties as assigned by management.
This description reflects the general details considered necessary to describe the principal functions of the job identified for the purpose of job evaluation. It should not be construed as a detailed description of all work requirements that may be inherent in the job, nor should it be construed as giving exclusive title to every function described.
Qualifications
- Accounting Education – minimum two-year associates degree or equivalent work experience with perpetual computerized inventory and product costing.
- Work experience with inventory management systems in automated lot-controlled batch manufacturing environment, where troubleshooting inventory accuracy and standard product costing were prevalent responsibilities.
- Intermediate to Excellent skills with Microsoft Office products including word, excel and outlook email required. Extracting Data from Tables, creating Pivot Tables, VLookups.
- Experience with ERP Systems, integrated computer systems to include order entry, inventory control, and production modules is required.
- Previous experience and knowledge of excise taxes preferred.
- Willing to travel to other sites or conferences on a scheduled basis.
- Requires solid math aptitude, calculating avg unit cost and conversion factors.
- Must possess problem-solving, troubleshooting, and accounting reconciliation skills.
- Ability to work with little supervision while handling multiple priorities.
- Ability to prioritize workload and utilize time management skills to meet deadlines.
- Detail oriented with an acumen for accuracy and thoroughness.
- Excellent oral and written communication skills and etiquette over the phone, email, meetings, and individually with others.
- Chemical product knowledge preferred and/or a willingness to learn required.
- Positive, personable, demonstrating a professional demeanor and appearance.
At Applied Digital, we are the epicenter of AI innovation, crafting cutting-edge data center solutions tailored for the demands of high-performance computing. Designed from the ground up to support AI and machine learning workloads, our infrastructure is the backbone of tomorrow’s technological advancements, including AI-driven video and generative platforms.
We are:
- Forward-Thinkers: With a keen eye on current market trends and future innovations, we adapt swiftly and lead technological evolution.
- Resilient: We navigate complex challenges and emerge stronger, delivering robust and reliable solutions for industry pioneers.
- Innovative Designers: Leveraging the latest technologies, we create visionary solutions that redefine industry standards.
We remain committed and steadfast in solving intricate problems, advancing business initiatives, maximizing operational efficiency, and reducing our carbon footprint. We are a team of resilient, forward-thinking innovators driving the AI revolution.
Position Summary
The Critical Facilities Manager is responsible for the overall operation, maintenance, and reliability of Data Center critical infrastructure systems. This role ensures continuous uptime and operational excellence across electrical, mechanical, and control systems that support mission-critical environments.
The Critical Facilities Manager leads site-level facilities operations, manages a team of technicians, and collaborates cross-functionally to ensure systems are maintained, risks are mitigated, and performance standards are consistently met.
Key Responsibilities
- Oversee the day-to-day operations of Data Center critical infrastructure systems, including electrical, mechanical, and controls systems
- Ensure maximum uptime, reliability, and efficiency of all facility systems supporting mission-critical operations
- Lead, develop, and manage a team of Critical Facilities Technicians and/or Engineers
- Establish and enforce preventative maintenance (PM) and corrective maintenance programs
- Coordinate and oversee vendor activities, service providers, and contractors
- Monitor system performance, alarms, and trends to proactively identify and mitigate risks
- Lead incident response, troubleshooting, and root cause analysis for system failures or performance issues
- Ensure compliance with safety standards, operational procedures, and regulatory requirements
- Maintain accurate documentation, including SOPs, MOPs, EOPs, and system diagrams
- Support commissioning, turnover, and integration of new systems and infrastructure
- Collaborate with Engineering, Construction, and IT teams on upgrades, expansions, and optimization efforts
- Manage facility-related budgets, including maintenance, repairs, and capital improvements
- Drive continuous improvement initiatives focused on reliability, efficiency, and operational excellence
- Provide regular reporting on facility performance, incidents, and KPIs
Required Qualifications
- Bachelor’s degree in Engineering, Facilities Management, or related field (or equivalent combination of education and experience)
- 7–10+ years of experience in Data Center, mission-critical facilities, or industrial operations
- 3+ years of leadership or supervisory experience managing technical teams
- Strong hands-on experience with critical infrastructure systems, including UPS, generators, switchgear, CRAC/CRAH units, chillers, and BMS/EPMS
- Experience managing preventative and corrective maintenance programs
- Proven ability to lead incident response, troubleshooting, and root cause analysis
- Experience working with third-party vendors, contractors, and service providers
- Knowledge of safety standards and regulatory requirements (e.g., OSHA, NFPA)
- Ability to read and interpret technical drawings, electrical one-lines, and mechanical diagrams
Preferred Qualifications
- Experience in Data Center environments supporting HPC, AI, or high-density compute workloads
- Familiarity with redundancy topologies (N, N+1, 2N, 2N+1) and Tier-level Data Center design principles
- Experience with commissioning and startup of Data Center infrastructure
- Certifications such as Certified Data Centre Professional (CDCP), Data Center Facility Operations (DCFO), or similar
- Experience with CMMS platforms and Data Center infrastructure monitoring tools (e.g., DCIM)
- Background in continuous improvement, reliability engineering, or operational excellence programs
- Experience supporting large-scale or hyperscale Data Center operations
Essential Skills
- Strong leadership and team management skills
- Excellent troubleshooting and problem-solving abilities
- Ability to make critical decisions in high-pressure situations
- Strong communication and cross-functional collaboration skills
- High attention to detail and commitment to operational excellence
- Proactive and ownership-driven mindset
Physical Requirements
- Ability to walk Data Center floors for extended periods
- Ability to climb stairs, ladders, and work around critical infrastructure equipment
- Ability to lift up to 50 pounds occasionally
- Ability to respond to emergencies on-site as needed, including off-hours support
Please note that Applied Digital is currently unable to sponsor new applicants for employment authorization or provide immigration-related support for this position. This includes, but is not limited to, visa categories such as H-1B, F-1 OPT, F-1 STEM OPT, F-1 CPT, J-1, TN, E-2, E-3, L-1, O-1, and any Employment Authorization Documents (EADs) or other work authorizations that require employer sponsorship.
The company has reviewed this job description to ensure that essential functions and basic duties have been included. It is intended to provide guidelines for job expectations and the employee's ability to perform the position described. It is not intended to be construed as an exhaustive list of all functions, responsibilities, skills and abilities. Additional functions and requirements may be assigned by supervisors as deemed appropriate. This document does not represent a contract of employment, and the company reserves the right to change this job description and/or assign tasks for the employee to perform, as the company may deem appropriate.
This job description in no way states or implies that these are the only duties to be performed by the employee(s) incumbent in this position. Employees will be required to follow any other job-related instructions and to perform any other job-related duties requested by any person authorized to give instructions or assignments. All duties and responsibilities are essential functions and requirements and are subject to possible modification to reasonably accommodate individuals with disabilities. To perform this job successfully, the incumbents acknowledge that they possess the skills, aptitudes, and abilities to perform each duty proficiently. Some requirements may exclude individuals who pose a direct threat or significant risk to the health or safety of themselves or others. This document does not create an employment contract, implied or otherwise, other than an “at will” relationship.
The company is an Equal Opportunity Employer, drug free workplace, and complies with ADA regulations as applicable.
*** New and Existing Product Elevator programs.
The position plays a key support role to ensure that these programs deliver a complete elevator system that meets customer, functional, code, and safety requirements.
Position Responsibilities: Primary responsibility is to evaluate and report the impact of changes, whether from a part or sub-system, to the elevator system envelopes.
Engineer may need to develop dimensional studies (including 3D modeling), performance studies, cost benefit analysis, prototyping, test plans, or code requirement studies of all affected sub-system(s).
System engineer should also be able to collect elevator requirements from all the stakeholders, and then de-compose these into requirements for the specific sub-systems.
This position will interface with multiple value streams such as supply chain, field operations, Marketing, factory support, and others to ensure that requirements are met.
The candidate should have a strong mechanical engineering background with complex system level integration experience.
Candidate will participate in product support activities where prior experience with root cause analysis, priority assessment, DFMEA, DFM, and other engineering tools is desired.
Position will also require implementation of Engineering Change notices, so a strong background/experience of engineering implementation process is desired.
Experience/Skills: Sound mechanical engineering background (mechanical and system modeling and design, component modeling and design) Development of Performance Envelopes (Duty Tables).
Generation of 2D layouts and studies (e.g.
AutoCAD).
Strong 3D modeling skills and ability to analyze interfaces and interferences.
Strong communications and leadership skills.
Working knowledge of Microsoft Office software.
Engineering change implementation process experience.
Experience with Root cause analysis, DFMEA, and other investigative ENG tools.
Requirements Management with team and stakeholders Design documentation with Mathcad desirable.
Previous Elevator Experience strongly preferred.
Education: BS Degree in mechanical engineering degree with 6+ years’ experience MS degree with 4+ years’ experience Position Responsibilities: Primary responsibility is to evaluate and report the impact of changes, whether from a part or sub-system, to the elevator system envelopes.
Engineer may need to develop dimensional studies (including 3D modeling), performance studies, cost benefit analysis, prototyping, test plans, or code requirement studies of all affected sub-system(s).
System engineer should also be able to collect elevator requirements from all the stakeholders, and then de-compose these into requirements for the specific sub-systems.
This position will interface with multiple value streams such as supply chain, field operations, Marketing, factory support, and others to ensure that requirements are met.
The candidate should have a strong mechanical engineering background with complex system level integration experience.
Candidate will participate in product support activities where prior experience with root cause analysis, priority assessment, DFMEA, DFM, and other engineering tools is desired.
Position will also require implementation of Engineering Change notices, so a strong background/experience of engineering implementation process is desired.
Experience/Skills: Sound mechanical engineering background (mechanical and system modeling and design, component modeling and design) Development of Performance Envelopes (Duty Tables).
Generation of 2D layouts and studies (e.g.
AutoCAD).
Strong 3D modeling skills and ability to analyze interfaces and interferences.
Strong communications and leadership skills.
Working knowledge of Microsoft Office software.
Engineering change implementation process experience.
Experience with Root cause analysis, DFMEA, and other investigative ENG tools.
Requirements Management with team and stakeholders Design documentation with Mathcad desirable.
Previous Elevator Experience strongly preferred.
This role will be a full-time position based out of Sparks, NV.
* Competitive pay
* Paid Time Off and Paid Holidays
* Health, dental and vision coverage
* 401(k) with matching contributions
* Employee Stock Purchase Plan
* Employee Assistance Program
* Wellness reimbursement program
* Easy access to public transit
* M - F 7:30AM - 4:30PM
* $21.00 an hour
What we're looking for
- Education: High School education or GED required.
- Experience: OSHA Forklift and HAZMAT certification a plus.
Who you are:
- Ability to apply common sense understanding to carry out detailed and uninvolved written or oral instructions. Ability to deal with problems involving a few concrete variables in standardized situations.
- To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
- Must be available to work any shift.
- Be able to handle stress caused in meeting deadlines with tight scheduling requirements.
- Must be able to use proper techniques to lift to 75 pounds. The ability to follow directions with emphasis on safety is extremely important.
- Must have responsible work habits.
- Must be familiar with warehouse systems.
- Must have forklift experience.
How you will thrive and create an impact
- Inbound: Unload trucks, trailers, containers of freight, counting products, compare to manifest to check all shipments for damage, infestation, or production code dates. Material handlers must report shortages, damages, and mis-shipments on appropriate forms. Also be able to sign for inbound shipments when necessary. All inbound shipments are moved safely to storage locations to be efficiently stacked as store merchandise.
- Order Picking: Ensure that the correct product number, quantity, and type (lot, batch, serial number) of product are picked. Transport orders to shipping locations or delivery platforms with material handling equipment such as but not limited to fork trucks, cherry pickers, or pallet jacks. Materials handlers must be able to label, stencil, tag, mark orders, band, bundle, wrap, over-pack, and palletize as required.
- Outbound: Compare quantity, labeling and address with order to ensure out-going shipments are complete and correct. Assign signature for outbound as necessary. Efficiently move product, cartons and or pallets into trailers, rail cars or containers.
- Maintain equipment in a neat, clean, and orderly fashion. Operate equipment safely and efficiently. Comply with company standards and OSHA requirements.
- Keep accurate records and reports. Assist in physical inventories and cycle counts. Ensure proper stock rotation. May key inventory adjustments in computer.
- Repack or re-box cases per customer instructions. Repair and consolidate damaged goods as required. Operate shrink-wrap machine. Charge forklift battery as needed; stack and or separate good from bad pallets when necessary; clean railcars, trailers, and truck docks, bays as requested.
Disclaimer:
The above statements are intended to describe the general nature and level of work being performed by employees assigned to this classification. They are not intended to be construed as an exhaustive list of all responsibilities, duties and skills required of employees assigned to this position. Avantor is proud to be an equal opportunity employer.
Why Avantor?
Dare to go further in your career. Join our global team of 14,000+ associates whose passion for discovery and determination to overcome challenges relentlessly advances life-changing science.
The work we do changes people's lives for the better. It brings new patient treatments and therapies to market, giving a cancer survivor the chance to walk his daughter down the aisle. It enables medical devices that help a little boy hear his mom's voice for the first time. Outcomes such as these create unlimited opportunities for you to contribute your talents, learn new skills and grow your career at Avantor.
We are committed to helping you on this journey through our diverse, equitable and inclusive culture which includes learning experiences to support your career growth and success. At Avantor, dare to go further and see how the impact of your contributions set science in motion to create a better world. Apply today!
EEO Statement:
We are an Equal Employment/Affirmative Action employer and VEVRAA Federal Contractor. We do not discriminate in hiring on the basis of sex, gender identity, sexual orientation, race, color, religious creed, national origin, physical or mental disability, protected Veteran status, or any other characteristic protected by federal, state/province, or local law.
If you need a reasonable accommodation for any part of the employment process, please contact us by email at let us know the nature of your request and your contact information. Requests for accommodation will be considered on a case-by-case basis. Please note that only inquiries concerning a request for reasonable accommodation will be responded to from this email address.
For more information about equal employment opportunity protections, please view the Know Your Rights poster.
3rd Party Non-Solicitation Policy:
By submitting candidates without having been formally assigned on and contracted for a specific job requisition by Avantor, or by failing to comply with the Avantor recruitment process, you forfeit any fee on the submitted candidates, regardless of your usual terms and conditions. Avantor works with a preferred supplier list and will take the initiative to engage with recruitment agencies based on its needs and will not be accepting any form of solicitation.
TravelCenters of America offers a convenient, one-stop shopping experience to our customers. We carry a wide selection of name-brand products, and are stocked with Grab 'N Go foods, groceries, snacks, electronics, maintenance supplies, and even clothing and gifts! The Cashier Lead is key member of the store team primarily responsible for providing excellent customer service to our guests so that we are returning every traveler to the road better than they came!
In this role, you can expect to:
- Work in a fun, trusting environment focused on great customer service
- Serve each customer courteously, quickly and efficiently with a sincere, positive, pleasant and enthusiastic attitude
- Process transactions of customers on a point-of-sale (POS) register; maintain a clean, well-stocked food and beverage area
- Order, receive, and unload product; Stock, organize, and rotate merchandise on planograms
- Perform cycle counts ensuring inventory accuracy
- Perform end of day reporting i.e. register audits and safe counts
- Assist with creating and managing the team's schedule
- Trains lower-level cashiers on job duties and responsibilities
- Prioritize your work according to the store and management needs
- Know and follow safety guidelines and report potentially unsafe situations caused by team members and customers
- Establish strong communication and rapport with leaders and co-workers
- Perform other job-related duties as assigned
What we'd like to see:
- A dedicated individual who works well with others and is excited to be part of our team!
- 4+ years of cashier experience preferred
- Computer/POS knowledge required
- Cash handling skills required
- Register audits and safe counting experience preferred
- Merchandising/stocking experience required
- Good verbal communication skills
- Ability to work flexible hours including nights, weekends and some holidays
With us, you'll enjoy:
- Medical, dental, vision and life insurance
- 401(k) with a company match
- Vacation and paid holidays
- Tuition reimbursement
- On-site Meal discounts
- A wide variety of discounts on technology, travel, food and fuel
- Opportunity for growth and advancement
Not all benefit plans are available to all team members. For a more comprehensive list of benefits, please visit Range $15. per hour - A pay range listed reflects the potential pay for this role. The pay will depend on various factors, such as responsibilities of the position, job duties/requirements, and relevant experience and skills. Not all positions posted will have a pay range listed.
Our travel centers serve thousands every day; not one traveler is the same and our team must reflect that. We can \"return every traveler to the road better than they came\" only by understanding and celebrating individualism. TravelCenters of America is proud to be an equal opportunity workplace. We are committed to equal employment opportunity regardless race, color, religion, creed, national or ethnic origin, age, marital status, familial status, ancestry, sex, gender, pregnancy, gender identity or expression, sexual orientation, mental or physical disability, handicap, military service or Veteran status, genetic information or membership in any other category protected by applicable federal, state or local law. At TravelCenters of America, we invite everyone to make themselves at home.
Individuals with a disability may request a reasonable accommodation related to our recruiting process. If you would like to request an accommodation related to the recruitment process, please email us at . In your email, please include your first and last name, phone number, the position and location for which you are applying, and details pertaining to the accommodation request.
Working Conditions / Physical Requirements In this role, the employee is continuously sitting and typing, frequently talking and using eye and hand coordination and may also be required to climb or balance; stoop, kneel, crouch or crawl. The employee is occasionally required to lift and/or move objects. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Standing, walking, bending over, and repetitive use of legs are done occasionally. All performed with or without a reasonable accommodation.
Disclaimer This job description may not list all duties for this position. The incumbent in the position may be asked to perform other duties. TA Operating LLC reserves the right to revise the job description at any time. This job description is not a contract for employment, and either the incumbent or TA Operating LLC may terminate employment at any time, for any reason.
There's never been a better time to join TravelCenters of America! For more than 50 years, millions of professional truck drivers and motorists have called our travel centers home, depending on us daily for fuel, food, truck maintenance and essential services.
Driven by a passionate team, TA is focused on growing its network of travel centers, implementing cutting edge technology and embarking on innovative alternative energy and sustainability initiatives.
From our locations across the country, to our corporate headquarters in Westlake, Ohio, every team member is a stakeholder in TA's success. This environment offers endless career opportunities for individuals interested in sharing their ideas, growing with the company and shaping TA's future.
Job Summary
TravelCenters of America offers a convenient, one-stop shopping experience to our customers. We carry a wide selection of name-brand products, and are stocked with Grab 'N Go foods, groceries, snacks, electronics, maintenance supplies, and even clothing and gifts! The Cashier is key member of the store team primarily responsible for providing excellent customer service to our guests so that we are returning every traveler to the road better than they came!
In this role, you can expect to:
* Work in a fun, trusting environment focused on great customer service
* Serve each customer courteously, quickly and efficiently with a sincere, positive, pleasant and enthusiastic attitude
* Process transactions of customers on a point-of-sale (POS) register; maintain a clean, well-stocked food and beverage area; clean and stock merchandise
* Prioritize your work according to the store and management needs
* Know and follow safety guidelines and report potentially unsafe situations caused by team members and customers
* Establish strong communication and rapport with leaders and co-workers
* Perform other job-related duties as assigned
What we'd like to see:
* A dedicated individual who works well with others and is excited to be part of our team!
* Basic computer/POS knowledge preferred
* Cash handling skills preferred
* Good verbal communication skills
* Ability to work flexible hours including nights, weekends and some holidays
With us, you'll enjoy:
* Medical, dental, vision and life insurance
* 401(k) with a company match
* Vacation and paid holidays
* Tuition reimbursement
* On-site Meal discounts
* A wide variety of discounts on technology, travel, food and fuel
* Opportunity for growth and advancement
Not all benefit plans are available to all team members. For a more comprehensive list of benefits, please visit Range
$15. per hour
A pay range listed reflects the potential pay for this role. The pay will depend on various factors, such as responsibilities of the position, job duties/requirements, and relevant experience and skills. Not all positions posted will have a pay range listed.
Our travel centers serve thousands every day; not one traveler is the same and our team must reflect that. We can \"return every traveler to the road better than they came\" only by understanding and celebrating individualism. TravelCenters of America is proud to be an equal opportunity workplace. We are committed to equal employment opportunity regardless race, color, religion, creed, national or ethnic origin, age, marital status, familial status, ancestry, sex, gender, pregnancy, gender identity or expression, sexual orientation, mental or physical disability, handicap, military service or Veteran status, genetic information or membership in any other category protected by applicable federal, state or local law. At TravelCenters of America, we invite everyone to make themselves at home.
Individuals with a disability may request a reasonable accommodation related to our recruiting process. If you would like to request an accommodation related to the recruitment process, please email us at . In your email, please include your first and last name, phone number, the position and location for which you are applying, and details pertaining to the accommodation request.
Typical Physical Demands
In this role, the team member is regularly required to talk and hear. Standing, walking, kneeling, stooping, bending over, crouching, crawling, climbing, and repetitive use of legs are done occasionally. The team member is occasionally required to lift up to 50 lbs and/or move heavy objects. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. All performed with or without a reasonable accommodation.
Work Environment
While performing these duties of this job, the employee may be exposed to outdoor elements in all seasons. Occasionally, the employee will also be exposed to fumes and particles, moving mechanical parts and vibration. The noise level in the work environment can be loud at times. While performing these duties, the employee may be exposed to dirt, dust, grime, grease, oil, gas, high-concentrated cleaning solutions, etc.
Disclaimer
This job description may not list all duties for this position. The incumbent in the position may be asked to perform other duties. TA Operating LLC reserves the right to revise the job description at any time. This job description is not a contract for employment, and either the incumbent or TA Operating LLC may terminate employment at any time, for any reason.
At HelloFresh, we want to change the way people eat forever by offering our customers high-quality food and recipes for different meal occasions. Over the past 10 years, we've seen this mission spread around the world and beyond our wildest dreams. Now, we are a global food solutions group and the world's leading meal kit company, active in 18 countries across 3 continents. So, how did we do it? Our weekly boxes full of exciting recipes and fresh ingredients have blossomed into a community of customers looking for delicious, healthy, and sustainable options. The HelloFresh Group now includes our core brand, HelloFresh, as well as: Green Chef, EveryPlate, Chefs Plate, Factor_, and Youfoodz.
The Environmental Health and Safety team is seeking an experienced Sr. Manager of Safety, you will serve as a site safety manager supporting site leadership. You are responsible for driving safe processes and ensuring compliance to all safety regulations. As well as being responsible for providing safety expertise leveraging lean principles and the hierarchy of controls to ensure the safety of our team members. You will develop and deliver safe processes through engineering and ergonomic solutions in partnership with building and HQ leadership. You will need to coordinate extensively with cross-functional groups such as Operations, HR, Food Safety & Quality, Operational Excellence, and others. You will build and deliver on-time programs that support operational growth where experimentation, imagination, innovation, and results are measured.
A successful Sr. Manager of Safety will have strong leadership skills, be detail-oriented, resilient, a quick decision maker, work with data, and possess a commitment to getting things right. You must be highly determined to drive permanent removal of hazard root causes and strive for the highest quality of service is provided in an efficient, effective, and proactive manner. This role will require granular analysis, tactical execution of Safety functions, site travel, (20%) and project management. This position affords you the opportunity to build cooperative partnerships with numerous business teams within the fulfillment operations.
You will...
- You will identify trends and areas of risk within your building and support operations in corrective measures
- Continuously improve the safety culture through instruction and training of Safety and Operations leaders on safety programs.
- You will assess performance, communicate to all levels of management, and ensure safety is incorporated into supply chain processes and escalate and report critical issues, compliance gaps and emerging risks for the network.
- You will also maintain safety subject matter expertise, credentials and engage industry resources as appropriate.
- Create weekly business reviews of projects, incidents, trend analysis (if any) and project statuses
- Work independently with limited direction and communicate effectively with team members
Safety Processes:
- Review metrics and incident details weekly, and support operations in determining root cause and corrective measures.
- Ensure safety programs and rollouts are implemented. Monitor for execution.
- Utilizes 6SIGMA and/or other analysis tools as appropriate to identify safety solutions for unique processes.
- Perform floor walks to interact with the team, audit for compliance and execution of safety programs.
- Assists with specialized safety program development and implementation.
- Solicits feedback and identifies benchmarking opportunities within the industry to identify tools, processes, systems and equipment to reduce the risk of injury.
- The ability to lead a team of Safety managers both with direct and indirect oversight.
Compliance and regulatory matters
- Responsible for having a thorough working knowledge of Federal and State OSHA regulations.
- Ensures safety processes are followed to maintain compliance with regulations.
- Supports the development and follow up of any remediation plans due to safety related citations
- Acts as a subject matter expert resource to field teams on safety related regulatory compliance issues.
- Works closely with other Compliance partners, including Industrial Hygiene, Environmental, and Field Compliance Team to address team member health exposure issues that are related to safety enforcement activities.
Incident Response
- Deploy to other locations in the event support is needed or to perform cross building audit activities
- Serve as on-site incident leader in the event of a severe injury
You are...
- Partner: you effectively listen, build rapport and communicate at all levels; you're confident sharing ideas and are a trusted advisor for workplace safety
- Results-driven: you recognize and resolve situations that are ambiguous or challenging, focus effort on meeting or exceeding goals, and pave the way for efficiency.
- Programmatic: able to identify the system component that is causing the error, as well as the options available for resolving it and completing the task.
- Inspirational: you know how to make an impact and deliver presentations that inspire and influence change
- Strategic: you understand you can't take a one-size-fits-all approach when problem-solving; seeing the bigger picture and each moving part helps you identify underlying causes, alternatives or long-term solutions
You have...
- Possess a bachelor's degree in occupational safety and health or a related field
- Certified Safety Professional or other Safety Certification
- Have 8+ years' management experience in occupational safety and health, NFPA, etc.
- Experience with OSHA VPP or implementing ISO45001, preferred
- Experience in a Manufacturing, Fulfillment or Distribution Environment
You'll get...
- Competitive hourly rate, 401K company match that vests immediately upon participation, & team bonus opportunities
- Generous PTO and flexible attendance policy
- Comprehensive health and wellness benefits with options at $0 monthly, effective first day of employment
- Up to 85% discount on subscriptions to HelloFresh meal plans (HelloFresh, Green Chef, Everyplate, and Factor_)
- Access to Employee Resource Groups that are open to all employees, including those pertaining to BIPOC, women, veterans, parents, and LGBTQ+
- Inclusive, collaborative, and dynamic work environment within a fast-paced, mission-driven company that is disrupting the traditional food supply chain
This job description is intended to provide a general overview of the responsibilities. However, the Company reserves the right to adjust, modify, or reassign work tasks and responsibilities as needed to meet changing business needs, operational requirements, or other factors.
Arizona Pay Range
$115,500—$134,750 USD
This position is also eligible for the HelloFresh equity plan.
About HelloFresh
We believe that sharing a meal brings people of all identities, backgrounds, and cultures together. We are committed to celebrating all dimensions of diversity in the workplace equally and ensuring that everyone feels a sense of inclusion and belonging. We also aim to extend this commitment to the partners we work with and the communities we serve. We are constantly listening, learning, and evolving to deliver on these principles. We are proud of our collaborative culture. Our diverse employee population enables us to connect with our customers and turn their feedback into meaningful action - from developing new recipes to constantly improving our process of getting dinner to our customers' homes. Our culture attracts top talent with shared values and forms the foundation for a great place to work!
At HelloFresh, we embrace diversity and inclusion. We are an equal-opportunity employer and do not discriminate on the basis of an individual's race, national origin, color, gender, gender identity, gender expression, sexual orientation, religion, age, disability, marital status, or any other protected characteristic under applicable law, whether actual or perceived. As part of the Company's commitment to equal employment opportunity, we provide reasonable accommodations, up to the point of undue hardship, to candidates at any stage, including to individuals with disabilities.
We want to adapt our processes and create a safe space that welcomes everyone so please let us know how we can accommodate our process. In case you have any accessibility requirements you can share that with us in the application form.
To learn more about what it's like working inside HelloFresh, follow us on Instagram and LinkedIn.
HelloFresh is committed to the principles of equal employment opportunity and providing reasonable accommodations to candidates with disabilities. If you need an accommodation during the application process, please reach out to us at:
- Europe:
- APAC:
- United States:
- Canada:
Voxel Innovations unlocks next-generation performance through Electrochemical Machining (ECM)—including pulsed and hybrid variants—to rapidly and precisely shape specialty metal alloys for aerospace, energy, industrial, AI, and medical customers. Our ~25–30 person team owns every step of the technology life-cycle, translating R&D into production under one roof.
The Role
Voxel Innovations is seeking a Manufacturing Quality Engineer to own, maintain, and continuously improve our Quality Management System (QMS) while being a hands-on partner to production and engineering. This role is not “paper quality.” You’ll be on the floor, in the details, and in the data—building systems that make it easier for the team to do the right thing every day and identifying and solving root causes.
You will help us operate (and evolve) a QMS aligned with ISO 13485 and/or AS9100 as our customer base grows. You’ll build structure without slowing the business down, and you’ll be a key driver of corrective action, risk reduction, and process capability in a precision manufacturing environment. This position is full-time based in Knightdale, NC.
About You
You are meticulous and structured without being rigid. You naturally see gaps, ambiguity, and failure modes—and you enjoy closing them. You bring enough technical depth to understand manufacturing processes and product requirements, but you also care about the fundamentals: clear documentation, traceability, training, and disciplined execution. You align with Voxel’s Core Values: Expect Excellence, Do Right By Others, Always Getting Better, What Would Happen If…
Job Description
QMS ownership & documentation
- Maintain and improve the Quality Management System (ISO 13485 & AS9100)
- Own document control: procedures, forms, records, revision history, approvals, and training linkage
- Write and maintain SOPs and Work Instructions (WI) that are usable on the shop floor
- Build/maintain templates and “quality infrastructure” (CAPA, NCR, MRB, supplier scorecards, audit checklists, etc.) so quality work is repeatable and fast
- Maintain and execute quality control plans and inspection procedures (incoming, in-process, final)
- Review and approve production travelers/routers, inspection reports, and batch records for completeness and compliance
- Support measurement and inspection activity as needed (hands-on), including working with GD&T intent and drawing requirements
- Own calibration control and measurement system discipline (gage control, basic MSA/Gage R&R where appropriate)
- Lead nonconformance containment, disposition (MRB), and corrective/preventive action
- Drive root cause analysis using structured methods (5-Why, fishbone, etc.)
- Use data (scrap, rework, yield, escapes, supplier defects) to prioritize improvements and prevent recurrence
- Audits, suppliers, and external requirements
- Plan and lead internal audits; coordinate/support customer and certification audits
- Own supplier quality activities: supplier evaluations, incoming inspection strategy, supplier corrective actions, and performance tracking
- Partner with engineering and operations to ensure purchasing controls and material traceability meet customer and regulatory requirements
- Lead/coordinate validation activities such as IQ/OQ/PQ and process/product qualification, ensuring documentation traceability and clear acceptance criteria
- Support transition from development work into repeatable production (control plans, risk reviews, inspection plans, recordkeeping)
- Collaborate daily with production, engineering, and program leadership to solve problems and improve execution
- Various other tasks as required in a small business
- Engineering degree preferred or equivalent industry experience
- 7+ years in manufacturing quality engineering with direct responsibility for process performance improvement
- Demonstrated track record of reducing defect rates, scrap, or variation through statistical and engineering-based methods
- Advanced root cause analysis experience involving complex, multi-variable manufacturing processes
- Proficiency in statistical tools (SPC, DOE, regression analysis, Cp/Cpk analysis) with hands-on software experience (Minitab, JMP, or equivalent)
- Experience implementing sustainable corrective actions that changed process capability (not temporary containment measures)
- Prior experience working in a regulated/certified quality system (ISO 13485 and/or AS9100 experience strongly preferred)
- Demonstrated ability to create and maintain clear procedures, records, and traceability
- Adeptness to operate hands-on in a production environment and communicate effectively with engineers and technicians
- This position requires access to controlled information under U.S. export control laws. Therefore, applicants must be U.S. persons (U.S. citizen or lawful permanent resident)
- Submittal of a cover letter describing why you are interested in working at Voxel and our mission
Powered by JazzHR
XTSjI3XpTe
We have two positions
Position 1
LinkedIn Pitch – QC Lead Investigator / Event Owner (Lab Equipment) | Philadelphia, PA
Join the Quality Control organization at Spark in Philadelphia as a QC Lead Investigator focused on laboratory equipment investigations and quality events. This contract role is ideal for someone experienced in QC/QA within regulated environments who enjoys digging into root cause, driving CAPAs, and improving lab systems.
You’ll lead equipment‑related investigations, manage deviations and change controls, support regulatory inspections, and serve as a system administrator for key QC lab platforms (Empower, Qx Manager, LabX, SoftMax, qPCR, etc.). Strong documentation, cross‑functional collaboration, and technical writing skills are essential.
Candidates should bring a Bachelor’s in a scientific or engineering field, hands‑on experience in GMP/regulated operations, and familiarity with root‑cause tools (5 Whys, Fishbone, FMEA). Experience with Veeva Vault QMS is a plus. This role is on‑site ~80% with standard business hours and some flexibility.
If you’re analytical, detail‑driven, and ready to support high‑visibility QC operations in a fast‑paced biotech environment, this is a strong opportunity to make an impact.
Position 2
LinkedIn Pitch – QC Lead Investigator / Event Owner | Philadelphia, PA (Onsite)
Spark’s Quality Control organization in Philadelphia is looking for a QC Lead Investigator/Event Owner to drive laboratory equipment investigations and quality events in a fast‑paced, highly regulated biotech environment. This contract role is ideal for someone who thrives on root‑cause analysis, CAPA execution, and cross‑functional problem‑solving.
In this position, you’ll lead equipment‑related investigations, manage deviations and change controls, support regulatory inspections, and partner closely with QC, QA, Lab Systems, and IT teams. You’ll also perform system admin tasks for key QC lab platforms and ensure documentation meets cGMP and global quality standards.
Candidates should bring a Bachelor’s in a scientific or engineering field, hands‑on QC/QA experience in regulated manufacturing, and familiarity with tools like Empower, Qx Manager, LabX, SoftMax, or qPCR systems. Strong technical writing, analytical thinking, and root‑cause methodologies (5 Whys, Fishbone, FMEA) are essential. Experience with Veeva Vault QMS is a plus.
This is an onsite role (~80%) with standard business hours and some flexibility. If you’re detail‑driven, collaborative, and ready to support high‑visibility investigations that directly impact product quality and compliance, this is a strong opportunity to step into a key role within QC.