Mini Circuits Address Jobs in Usa

Date Posted:

Country:

Location:

Position Role Type:

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Security Clearance Type:

Security Clearance Status:

At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world.

Our Mission is to develop best in industry technologies that align product capabilities to the needs of our customer. We will empower our people to leverage design commonality and innovation, balancing risk and rigor, to achieve predictable and affordable solutions. We are looking for candidates willing to collaborate, innovate, and team with our engineers to generate and utilize today’s cutting-edge technology.

This position is an onsite role, located in Tucson, AZ.

What You Will Do:

• Responsible for Printed Circuit Board (PCB) designs from conception to manufacturing

• Creation of the PCB, Circuit Card Assembly (CCA), and Schematic drawings for suppliers

• Schematic Capture, Component Placement, Routing of Traces, Gerber/ODB++ file creation

• Utilize software such as Siemens: Xpedition Enterprise and DownStream Technologies: BluePrint-PCB

• Design layouts include Rigid, Flex, and Rigid-Flex assemblies

• Work designs to include full designs, re-spins, drawing updates, change notices, copper changes, and process improvement projects within and outside own discipline

• Daily interface with various engineering levels along with different engineering disciplines including, but not limited to Electrical, Mechanical, Components, Test, and Producibility Engineering disciplines to ensure that the overall design requirements are captured, keeping cost, cycle time, and producibility in mind

Qualifications You Must Have:

• Typically requires a Bachelor’s in Science, Technology, Engineering, or Mathematics (STEM) and a minimum of 5 years of prior relevant experience to include any combination of the following:

  • Experience with PCB manufacturing or CCA manufacturing principles that affect circuitry and component layout with RF specific layout techniques

  • Experience with the electrical design process including RF layout

  • Experience with laying out Rigid, Flex, or Rigid-Flex boards

  • Experience with multi-layer board design

Qualifications We Prefer:

• Working knowledge of Analog, Digital including DDR, specific experience with RF, Power, and mixed technology, including multi-layer designs with High Density Interconnect (HDI) technology

• Technical PCB design skills using the Siemens design toolset including, but not limited to the Xpedition Layout tool suite with working knowledge of schematic capture, placement, routing, use of the auto-router, constraint manager, and library tools, and use of BluePrint to create complex PCB and CCA drawings, Altium is not used, but transfers over well to the Siemens toolset

• Export manufacturing data in both Gerber and ODB++ formats

• Use of Valor NPI, Design for Manufacturing rule sets, other Design Rule Checking software

• Able to understand and interpret drawings as they relate to PCB’s and CCA’s

• Familiarity with IPC 6012 & IPC 6013

• Working knowledge of military and commercial design standards, GD&T techniques, and overall producibility considerations related to electronic packaging

• Knowledge of RF circuitry and key care abouts when it come to laying out the board along with filter knowledge

• Working knowledge of operating system concepts and implementations, network services as related to Microsoft Windows suites

• Willingness to work extended hours (nights and/or weekends) as required to complete assigned tasking

• Active Secret DoD security clearance
  
   

What We Offer

Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Trust, Respect, Accountability, Collaboration, and Innovation.

This position offers relocation based on candidate eligibility.

Learn More & Apply Now!

This position requires a security clearance. DCSA Consolidated Adjudication Services (DCSA CAS), an agency of the Department of Defense, handles and adjudicates the security clearance process. More information about Security Clearances can be found on the US Department of State government website here:

#LI-CV1

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms

Date Posted:

Country:

Location:

Position Role Type:

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Security Clearance Type:

Security Clearance Status:

At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world.

Our Mission is to develop best in industry technologies that align product capabilities to the needs of our customer. We will empower our people to leverage design commonality and innovation, balancing risk and rigor, to achieve predictable and affordable solutions. We are looking for candidates willing to collaborate, innovate, and team with our engineers to generate and utilize today’s cutting-edge technology.

This position is an onsite role, located in Tucson, AZ.

What You Will Do:

• Responsible for Printed Circuit Board (PCB) designs from conception to manufacturing

• Creation of the PCB, Circuit Card Assembly (CCA), and Schematic drawings for suppliers

• Schematic Capture, Component Placement, Routing of Traces, Gerber/ODB++ file creation

• Utilize software such as Siemens: Xpedition Enterprise and DownStream Technologies: BluePrint-PCB

• Design layouts include Rigid, Flex, and Rigid-Flex assemblies

• Work designs to include full designs, re-spins, drawing updates, change notices, copper changes, and process improvement projects within and outside own discipline

• Daily interface with various engineering levels along with different engineering disciplines including, but not limited to Electrical, Mechanical, Components, Test, and Producibility Engineering disciplines to ensure that the overall design requirements are captured, keeping cost, cycle time, and producibility in mind

Qualifications You Must Have:

• Typically requires a Bachelor’s in Science, Technology, Engineering, or Mathematics (STEM) and a minimum of 5 years of prior relevant experience to include any combination of the following:

  • Experience with PCB manufacturing or CCA manufacturing principles that affect circuitry and component layout with RF specific layout techniques

  • Experience with the electrical design process including RF layout

  • Experience with laying out Rigid, Flex, or Rigid-Flex boards

  • Experience with multi-layer board design

Qualifications We Prefer:

• Working knowledge of Analog, Digital including DDR, specific experience with RF, Power, and mixed technology, including multi-layer designs with High Density Interconnect (HDI) technology

• Technical PCB design skills using the Siemens design toolset including, but not limited to the Xpedition Layout tool suite with working knowledge of schematic capture, placement, routing, use of the auto-router, constraint manager, and library tools, and use of BluePrint to create complex PCB and CCA drawings, Altium is not used, but transfers over well to the Siemens toolset

• Export manufacturing data in both Gerber and ODB++ formats

• Use of Valor NPI, Design for Manufacturing rule sets, other Design Rule Checking software

• Able to understand and interpret drawings as they relate to PCB’s and CCA’s

• Familiarity with IPC 6012 & IPC 6013

• Working knowledge of military and commercial design standards, GD&T techniques, and overall producibility considerations related to electronic packaging

• Knowledge of RF circuitry and key care abouts when it come to laying out the board along with filter knowledge

• Working knowledge of operating system concepts and implementations, network services as related to Microsoft Windows suites

• Willingness to work extended hours (nights and/or weekends) as required to complete assigned tasking

• Active Secret DoD security clearance
  
   

What We Offer

Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Trust, Respect, Accountability, Collaboration, and Innovation.

This position offers relocation based on candidate eligibility.

Learn More & Apply Now!

This position requires a security clearance. DCSA Consolidated Adjudication Services (DCSA CAS), an agency of the Department of Defense, handles and adjudicates the security clearance process. More information about Security Clearances can be found on the US Department of State government website here:

#LI-CV1

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms

Date Posted:

Country:

Location:

Position Role Type:

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Security Clearance Type:

Security Clearance Status:

At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world.

Effector RF Design Department is responsible for designing RF and Microwave hardware, including transmitters, receivers, and exciters. This includes design and test activities that span preliminary design to integration. Products we develop support radar and datalink applications on a variety of tactical missile programs. Critical to this role is designing for challenging mechanical constraints and extreme environments.

This position is an onsite role, located in Tucson, AZ.

What You Will Do

• Design and development of transmitters, receivers or exciters
• Design of circuit card assemblies (CCAs) with RF or mixed signals
• Work in a lab to accomplish component characterization as well as module verification and integration
• Test and handle sensitive RF Hardware
• Schematic capture and RF routing
• Partner with interdisciplinary teams - power, digital, mechanical, etc.

Qualifications You Must Have

• Typically requires a Bachelor’s in Science, Technology, Engineering, or Mathematics (STEM) and a minimum of eight years of prior relevant experience to include any combination of the following:
  • Experience with RF design and fabrication
  • Experience with RF testing and troubleshooting
  • Experience with the simulation of RF products
  • Experience with any of the following tools:
    • Mentor DX Designer or equivalent
    • High Frequency Structure Simulator (HFSS) or equivalent
    • SystemVue/Genesys or equivalent
    • Advanced Design System (ADS) or equivalent

Qualifications We Prefer

• Mentorship or apprenticeship experience 
• Technical oversight responsibilities for less-senior engineers
• Working across domains on complex projects
• Architecting and requirements definition for complex RF products
• Team leadership experience on technical projects including experience w/ cost and schedule
• EVMS or CAM experience

• Ability to prepare documentation with minimal oversight
• Background in designing for manufacturability, producibility, and cost constraints. Includes yield and margin analysis
• Technical background in the following areas:
  • Cascade analysis and/or frequency planning
  • Filter design and fabrication
  • Circuit card assembly design and fabrication
  • Testing or designing RF hybrid (chip and wire) technologies
  • High speed data converter test/characterization
  • High power RF design or test experience
  • Scripting experience (Matlab or Python)
• Some front line leadership desirable

What We Offer

Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Trust, Respect, Accountability, Collaboration, and Innovation.

This position offers relocation based on candidate eligibility.

Learn More & Apply Now!

This position requires a security clearance. DCSA Consolidated Adjudication Services (DCSA CAS), an agency of the Department of Defense, handles and adjudicates the security clearance process. More information about Security Clearances can be found on the US Department of State government website here:

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms

• 
  
• Design, implement, and improve manufacturing processes and workflows for circuit card assemblies, electronics box assemblies, and ground support equipment
  
• Program SMT equipment including Screen Printers, Placement, and Reflow ovens
  
• Analyze production data to identify inefficiencies and recommend solutions
  
• Support new product introductions by developing and validating manufacturing processes
  
• Collaborate with design, quality, and operations teams to ensure manufacturability and compliance
  
• Troubleshoot production issues and implement corrective actions
  
• Understand engineering drawings and translate them into work instructions for manufacturing technicians
  
• Design manufacturing fixtures for use by production technicians using SolidWorks CAD Software
  
• Lead continuous improvement initiatives using Lean, Six Sigma, or other methodologies
  

• 
  
• Bachelor's degree in Mechanical, Industrial, or Manufacturing Engineering or related field, or equivalent experience
  
• 3 years of experience in a manufacturing engineering role
  
• Strong understanding of manufacturing principles, process design, and quality systems
  
• Experience with CAD software and manufacturing tools
  
• Knowledge of Lean Manufacturing, Six Sigma, or similar methodologies
  
• Excellent problem-solving and communication skills
  

With a passion for life

Join our diverse teams of passionate people and a career that allows you to develop both personally and professionally. At Getinge we exist to make life-saving technology accessible for more people. To make a true difference for our customers - and to save more lives, we need team players, forward thinkers, and game changers.

Are you looking for an inspiring career? You just found it.

Job Overview

This position is responsible for the research, design, development and sustainability of electronic medical equipment. This individual serves as electrical engineer in a project team. As a key member of the project team, the engineer will collaborate closely with engineers and a cross-functional team to support the full product lifecycle.

Job Responsibilities and Essential Duties

• 
  
• Provide electrical technical in the research, design, development and sustainability of electronic circuits for medical devices. Ensure and maintain compliance to Corporate and Industry standards.
  
• Performs medical devices electrical system requirement study and functions research, participates in design & development activities, collaboration with contractors defining interface, power consumption and board dimensions.
  
• Programs bare metal coding for system control, performs design activities using EDA tools like OrCAD for schematics capture and PCB layout, generate circuit schematic diagrams, bills of materials and performance analyses, works with contractors for PCB fabrication and SMT, brings up PCB in the lab with tools like multimeter, oscilloscope.
  
• Perform system assembly, function testing, data analyzing, and test results documenting.
  
• Prepare documents including Design Specifications, Verification and Validation protocols/reports, relevant Risk Analysis.
  
• Support design reviews and contribute to risk assessments and design verification activities.
  
• Remote and Onsite electrical technical support as needed by the project.
  

Minimum Requirements

• 
  
• B.S. in Electrical Engineering, M.S. preferred.
  
• Minimum 0-2 years related experience
  

Required Knowledge, Skills, and Abilities

• 
  
• Deep understanding principles of DC regulators, such as LDO, Switching regulators.
  
• Knowledge of microcontroller hardware design and firmware coding, sensor interfaces such as SPI, I2C.
  
• Experience with EDA tools (OrCAD, Altium Designer, KiCAD etc.) design for schematic capture, PCB layout.
  
• Strong lab skills, including experience with oscilloscopes, multi-meter, and other diagnostic tools.
  
• Ability to work effectively in a cross-functional team environment and take direction from project leaders.
  
• Structured problem solving / root cause analysis.
  
• Ability to communicate within the discipline and with others who are not as technically trained.
  
• Strong oral and written communication skills
  
• Ability to prioritize tasks in a fast-paced environment.
  
• Knowledgeable using Adobe and Microsoft Office products such as Outlook, Word, Excel and PowerPoint.
  
• Annual Salary of 97K-107K depending on experience
  
  #LI-JF1 #LI
  

About us

With a firm belief that every person and community should have access to the best possible care, Getinge provides hospitals and life science institutions with products and solutions aiming to improve clinical results and optimize workflows. The offering includes products and solutions for intensive care, cardiovascular procedures, operating rooms, sterile reprocessing and life science. Getinge employs over 12,000 people worldwide and the products are sold in more than 135 countries.

Benefits at Getinge:

At Getinge, we offer a comprehensive benefits package, which includes:

• 
  
• Health, Dental, and Vision insurance benefits
  
• 401k plan with company match
  
• Paid Time Off
  
• Wellness initiative & Health Assistance Resources
  
• Life Insurance
  
• Short and Long Term Disability Benefits
  
• Health and Dependent Care Flexible Spending Accounts
  
• Commuter Benefits
  
• Parental and Caregiver Leave
  
• Tuition Reimbursement
  

Getinge is an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, pregnancy, genetic information, national origin, disability, protected veteran status or any other characteristic protected by law.Reasonable accommodations are available upon request for candidates taking part in all aspects of the selection process.

With a passion for life

Join our diverse teams of passionate people and a career that allows you to develop both personally and professionally. At Getinge we exist to make life-saving technology accessible for more people. To make a true difference for our customers - and to save more lives, we need team players, forward thinkers, and game changers.

Are you looking for an inspiring career? You just found it.

Steritec Products Inc., a member of the Getinge Group, manufactures sterilization and cleaning medical device consumables using ink technology. We manufacture and print highly specialized proprietary inks that undergo specific color changes when exposed to different sterilization conditions in hospital and industrial/pharmaceutical sterilizers.

We are located in the beautiful Inverness Business Park in Englewood, CO. We offer a generous benefit package (medical, dental, vision, life, LTD, 401(k) as well as PTO, company-paid holidays and much more) all effective first day of employment!

This Maintenance Technician III position is an on-site, full-time, non-exempt position. Hours are Monday - Friday, 9:30am - 6:00pm (with some flexibility).

Job Summary:

The Maintenance Technician III provides preventative maintenance and repair services at the Denver establishment, following manufacturers' instructions and utilizing knowledge of mechanical, hydraulic, and electronic equipment (as appropriate to position level). This position is primarily responsible for on-going maintenance, development, and upkeep of facility equipment and complex sterilization equipment.

Preferred skills include LabView maintenance and programming to interface with sterilization equipment, including sensors, actuators, and instrumentation devices.
In addition, this position is responsible for independently maintaining, diagnosing, and repairing sterilizers and other laboratory equipment, as needed.

Responsible for maintaining all the equipment in the facility, the facility itself inside and out, and miscellaneous maintenance duties as needed. Special emphasis placed on accurate record keeping for FDA GMP purposes with focus on maintaining accurate maintenance logs.

Job Functions:

• 
  
• Provide preventative maintenance at location in accordance with established procedures and techniques using proper tools, test equipment and replacement parts.
  
• Comply with all health and safety codes and procedures as mandated by Getinge policies, quality requirements and regulatory agencies.
  
• Establish and maintain positive and cooperative working relationships with customers and all Getinge personnel.
  
• Maintain personal competence for meeting job responsibilities through effective use of product information and technical data provided by Getinge and others.
  
• Participate in training seminars, meetings and on-the-job training programs.
  
• Demonstrate an understanding of and an ability to apply concepts and knowledge obtained from these training and skill development sources.
  
• Accurately prepare and submit on schedule all required reports.
  
• Maintain expenses and required inventory within guidelines and limits established by the Operations Manager.
  
• Satisfactorily complete all training as required by Getinge training and certification processes, regulatory bodies, and quality systems.
  
• Perform other related duties as assigned.
  
• Keeps all equipment in good working order including the manufacturing equipment, printing equipment, shipping equipment, material handling, sterilizing equipment and office equipment.
  
• Keeps the facility and facility grounds clean and in good condition.
  
• Establishes a schedule and conducts effective preventive maintenance.
  
• Ability to start up, perform testing and preventative maintenance on boiler system. knowledge and ability to perform equipment and system preventative maintenance and inspection.
  

Required Knowledge, Skills and Abilities:

• 
  
• 3+ years' experience with industrial machine maintenance and electronic wiring and soldering or equivalent combination of education and directly related experience.
  
• FDA/ISO exposure and document control and ability to read, interpret and test according to FDA and ISO standards a plus
  
• Higher-temperature repair and pipe fitting experience a plus
  
• Pressurized systems maintenance preferred
  
• Very strong technical proficiency in using schematics, system diagrams and repair/replacement procedures to troubleshoot, repair, and calibrate all products assigned.
  
• Has the ability to assist with troubleshoot, repair and install facility and production equipment in an efficient manner to minimize operation downtime
  
• Desirable to have experience and understanding of electronic circuit logics (e.g. discrete, TTL, MOS, and linear circuits) and Relay Ladder Logic troubleshooting and PLC programming
  
• Printing equipment repair experience a plus
  
• Knowledge of various steam equipment operations desired
  
• Computer literacy; familiarity with information technology concepts, personal computers, Microsoft Windows operating system and Microsoft Office applications.
  
• Strong verbal and written communication skills.
  
• Functional troubleshooting and diagnostic skills.
  
• Strong organizational skills and detail oriented. Self-motivated, self-starter, and ability to work independently
  
• Ability to travel nationally (corporate training, 10%)
  
  

Quality Requirements:

• 
  
• Build Quality into all aspects of work
  
• Ensure compliance to all FDA and Worldwide Quality & Compliance regulations (As applicable to your job function)
  
• You must have the education and experience to understand and comply with U.S. and Worldwide medical device regulations (As applicable to your job function)
  
• Attend all required Quality & Compliance training at the specified interval
  
• Adopt the "Beyond Compliance Quality Culture" in the work environment; always meet and exceed requirements
  
• Must practice verbatim compliance (exact compliance, no interpretation) with corporate Quality and Regulatory procedures (As applicable to your job function)
  
• If your job description requires customer facing activities, you must thoroughly understand and comply with the Customer complaint reporting process and complaint procedures (As applicable to your job function)
  
• Must be able to promptly report any non-compliance issues to Director QA, RA, Compliance officer or appropriate administrator, including the Compliance Hotline
  
• Must be compliant with 21 CFR 820 and any other applicable federal regulations, and Quality standards (As applicable to your job function)
  
  

Environmental/Safety/Physical Work Conditions:

• 
  
• Must be able to respond to inquiries and communicate with others in writing and via telephone.
  
• Must be able to decipher data from computer-generated reports, software programs, technical manuals and written correspondence.
  
• Must be able to wear required personal protective equipment (including biological/chemical protection) whenpotential hazards exist on company premises.
  
• Must be able to safely and correctly manipulate and utilize required hand tools.
  
• Ordinarily, and generally speaking, temporary modifications of this position to accommodate for light duty orphysical limitations is not feasible due to the independent nature of the position as well as the physical nature of the basic required job duties.
  
• Must be able to work at PC work station/laptop 1/4 of standard workweek.
  
• Responsible for understanding and conforming to the Environmental Policy to ensure that significantenvironmental aspects that relate to actual or potential impacts with their work are executed to minimize theeffects on the environment
  
• Responsible for bringing to the attention of management any potential improvements that could reduce our environmental impact or to report activities that could result in a negative impact to the environment
  
• Responsible for understanding and conforming to the Health and Safety Policy to ensure that the significantrisks that relate to actual or potential hazards with their work are identified
  
• May work extended hours during peak business cycles.
  
• Ability to speak clearly in order to communicate with customers, vendors and employees in person
  
• Must be willing to work in both sitting and standing positions for long periods of time, up to 8 hours per shift.
  
• Willingness to frequently move to various locations within building
  
  

Internal and External Contacts/Relationships:

• 
  
• Employees
  
• Top Management
  
• Training and Development Department
  
• 3rd party contractors
  

Pay rate: $28 - $40 / hr, depending on experience

#LI-BS1

About us

With a firm belief that every person and community should have access to the best possible care, Getinge provides hospitals and life science institutions with products and solutions aiming to improve clinical results and optimize workflows. The offering includes products and solutions for intensive care, cardiovascular procedures, operating rooms, sterile reprocessing and life science. Getinge employs over 12,000 people worldwide and the products are sold in more than 135 countries.

Benefits at Getinge:

At Getinge, we offer a comprehensive benefits package, which includes:

• 
  
• Health, Dental, and Vision insurance benefits
  
• 401k plan with company match
  
• Paid Time Off
  
• Wellness initiative & Health Assistance Resources
  
• Life Insurance
  
• Short and Long Term Disability Benefits
  
• Health and Dependent Care Flexible Spending Accounts
  
• Commuter Benefits
  
• Parental and Caregiver Leave
  
• Tuition Reimbursement
  

Getinge is an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, pregnancy, genetic information, national origin, disability, protected veteran status or any other characteristic protected by law.Reasonable accommodations are available upon request for candidates taking part in all aspects of the selection process.

At American Packaging Corporation (APC), you'll find the packaging career you've been looking for. With competitive salaries, excellent benefits, 401(k) plans and tuition reimbursement programs, we nurture our employees while advancing and promoting diversity and inclusion. As the leading flexible packaging converter in North America for over a century, APC's longstanding success is fueled from the inside out. We're constantly seeking to improve our internal operations and were named a "Best of the Best" in the Best workplaces in the America's awards for 12 years in a row. It's how and why we engage the best and brightest talent to continue propelling our shared success into the future.

LOCATION: Rochester, NY

SUMMARY: A program designed to train a skilled worker through a combination of on-the-job training and classroom instruction to become a Maintenance Technician at American Packaging Corporation. Maintenance Technicians are responsible for electrical and mechanical systems in the facility, which will include troubleshooting and routine maintenance activities. Throughout this program, they will learn to troubleshoot and repair equipment problems that affect productivity of the manufacturing group as well as plant facilities and subsystems. They will learn to be involved with the process improvements providing input in production problem solving.

Approval Process: Applicants will be interviewed and chosen based on their experience, knowledge, and overall work history. The chosen finalists will be required to take and pass an aptitude test.

ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned.

Duration: 3-4 years for completion

Classroom Training: Several courses required through local school, such as Electrical, Industrial, Mechanical and Machining courses.

Hours of Work: As needed for class schedule, must be flexible.

On the Job Training:

A. Tool and Supply Room (~200 hrs)

Learn size of wire conduit and bending of conduit, use of tools and how to determine the size of load safety.

B. Lighting (~200 hrs)

Replacement of incandescent lamps and hot cathode fluorescent tubes and starters. Repair of fluorescent fixtures, replacing ballast, socket and wiring, code requirements. Repair of LED fixtures, replacing drivers and troubleshooting.

C. Trouble Shooting AC Wiring (~300 hrs)

Learn to locate and repair contactor problems, replacing contacts and contactor. Locate and replace blown fuses. Check and repair limit switches, push buttons, etc.

D. Special Circuits AC (~500 hrs)

Learn to read wiring diagrams. Operation of special control circuits, time delay switches, electrical braking.

E. Direct Current Machinery (~500 hrs)

Learn to locate and repair direct current motor troubles in fields, armatures, bearings, brush holders, and commutators. Knowledge of variable speed DC drives. Repair and maintenance of DC contactors and field control.

F. General Wiring (~500 hrs)

Learn proper handling and installation of power feeding, wiring, fuse panels, breakers, etc. Estimate load requirements. Code requirements. Install general wiring.

G. Instruments (~100 hrs)

Learn proper use and care of voltmeter, ammeter, watt meter, oscilloscope and megger, etc.

H. Computerized Controls (~600 hrs)

Programmable logic controllers: reading diagrams and schematics; maintaining and troubleshooting.

I. Care, Use and Safety of Tools and Equipment (~500 hrs)

Hand tools, power tools, machines and power equipment, ladders, scaffolding and hoists.

J. Machine Repair (Mechanical) (~1500 hrs)

Assembly and disassembly, bearings, power transmission, construction, rigging, lubrication. Safety.

K. Bench Work and Machinery (~300 hrs)

Lathes, milling machines, grinding machines, drill press, power saw, etc. Safety.

L. Pipefitting (~300 hrs)

Layout, installation, repair, replacement, pumps and compressors, valves and controls. Safety.

M. Welding (~500 hrs)

Protective clothing and equipment, burning and cutting, controls and gauges, electric arc welding, properties of metals. Safety.

QUALIFICATION REQUIREMENTS:

To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

EDUCATION and/or EXPERIENCE

High School Diploma or Equivalent. Active, regular Full-time employee of American Packaging Corporation. Part-time or temporary employees of APC are not eligible to participate in this program.

LANGUAGE SKILLS

Ability to read, analyze, and interpret general business periodicals, technical procedures, or instructions. Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information and respond to questions from others.

MATHEMATICAL SKILLS

Ability to calculate figures and amounts such as proportions, percentages, area, circumference and volume. Ability to apply concepts of basic algebra and geometry.

REASONING ABILITY

Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form.

PHYSICAL DEMANDS

The physical demands described here are representatives of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is occasionally required to stand, walk, sit, and talk or hear. This position may require manual lifting not to exceed 50 lbs - reference your department-specific JHA (job hazard analysis) for departmental lifting restrictions. Specific vision abilities required by this job include color vision.

WORK ENVIRONMENT

While performing the duties of this job, the employees is occasionally exposed to moving mechanical parts and fumes or airborne particles. The noise level in the work environment is usually moderate.

American Packaging Corporation is committed to equal opportunity for all, without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic. American Packaging Corporation will make reasonable accommodations for known physical or mental limitations of otherwise qualified employees and applicants with disabilities unless the accommodation would impose an undue hardship on the operation of our business. EOE/AA Disability/Veteran.

If you are interested in applying for an employment opportunity and need special assistance or an accommodation to apply for a posted position, please contact our Human Resources department at:

.

Rite-Hite is the global leader in the manufacture and distribution of industrial loading dock and door equipment. Our innovative products and world class sales organization ensure solid, consistent growth, both for our company and our staff. We are always looking ahead to develop innovative new products and services to improve our customers' safety, security, and productivity.

Rite-Hite provides competitive compensation and a comprehensive benefits package with medical, dental, and vision coverage along with life and paid medical leave. We also provide a retirement savings plan that combines 401(K) with company match and profit sharing. Paid holidays, vacation, and up to five paid personal/sick days per year round out the package.

Rite-Hite is an Equal Opportunity/Affirmative Action employer offering a drug free workplace for our customers and employees.

We are seeking a motivated and detail-oriented Electrical Engineering Intern to join our team at our manufacturing facility in Dubuque, IA. In this role, you will support electrical engineering staff in the design, testing, analysis, and improvement of electrical systems, components, and products. This internship provides hands-on experience with real-world electrical engineering applications and the opportunity to apply academic knowledge in a professional environment.

Essential Duties and Responsibilities

• Assist electrical engineers with the design, development, and testing of circuits, control systems, and electronic components.
• Perform data collection, signal analysis, and documentation to support ongoing electrical engineering projects.
• Create, update, and review electrical schematics, wiring diagrams, PCB layouts, and technical reports.
• Conduct research on electrical components, emerging technologies, and engineering methods as assigned.
• Support troubleshooting, root-cause analysis, and quality checks on electrical systems or prototypes.
• Participate in design reviews, project meetings, and technical presentations.
• Follow company safety procedures, electrical standards (e.g., NEC, IEC), and engineering best practices.

Education and/or Experience

• Currently pursuing a bachelor's degree in Electrical Engineering or a closely related field.
• Strong analytical, mathematical, and problem-solving skills.
• Familiarity with electrical engineering tools, laboratory equipment, and simulation software.
• Effective communication and teamwork abilities.
• Willingness to learn and adapt in a fast-paced engineering environment.

Preferred Qualifications

• Experience with tools such as MATLAB, LTspice, PSpice, Simulink, LabVIEW, Python, or CAD for electrical design (e.g., Altium, KiCad, AutoCAD Electrical).
• Hands-on project, lab, or internship experience in circuits, electronics, power systems, or embedded systems.
• Knowledge of electrical safety standards, PCB design principles, or relevant technical concepts (e.g., signal processing, control systems, microcontrollers)

Additional Job Information:

The Opportunity

The Department of Electrical and Computer Engineering (ECE) at the University of Central Florida (UCF) invites applications for a full-time, 9-month tenure-earning assistant professor or tenured associate professor with an expected start date of December 23, 2026.

We seek visionary scholars in the area of RF and Microwave Circuits and Systems. This position presents an exceptional opportunity for the successful candidate to lead innovation in high-frequency electronics-ranging from 5G/6G communications and IoT to specialized RF systems for spaceborne and extreme-environment applications.

The successful candidate will leverage UCF's proximity to the aerospace and defense industries to bridge the gap between academic research and the burgeoning commercial space industry. Given the scale of our programs, this is a unique opportunity to shape the future workforce by training and mentoring the next generation of engineers through our comprehensive undergraduate and graduate programs.

We are particularly interested in candidates who have demonstrated a strong record of scholarly excellence, as evidenced by impactful publications and innovative contributions, and who show clear potential to build and sustain a robust, externally funded research program. The successful candidate will be expected to contribute to high-quality teaching at all levels and to collaborate across disciplines to strengthen UCF's global leadership in electromagnetics and circuit design.

Appointment rank will be commensurate with experience and academic achievements.

Minimum Qualifications:

Doctoral degree from an accredited institution in electrical engineering, or other closely related disciplines at the time of appointment. Applicants must have a strong research track record supported by quality publications.

To be eligible for appointment as a tenured associate professor upon hire, the selected candidate must have a demonstrated record of teaching, research, and service commensurate with a tenured faculty appointment at the rank of associate professor.

Preferred Qualifications:

Past work experience in academia with strong funding record is desirable. A demonstrated record of teaching/training experience is of interest.

Additional Application Materials Required:

UCF requires all applications and supporting documents be submitted electronically through the Human Resources employment opportunities website, jobs/. In addition to the online application, interested candidates should upload the following:

• 
  

• A curriculum vitae.

  
  

• A letter of interest describing qualifications for the position, such as research agenda and teaching experience/interest.

  
  

NOTE: Please have all documents ready when applying so they can be attached at that time. Once the online submission process is finalized, the system does not allow applicants to submit additional documents later.

The selected candidate will be required to submit official transcripts (and, as applicable, U.S. degree equivalency evaluations) documenting the conferral of their qualifying academic credentials.

Questions regarding this search should be directed to, Professor Xun Gong at .

Special Instructions to the Applicants:

Sponsorship for employment-based visas will only be considered under exceptional circumstances and is not guaranteed. Preference will be given to candidates who are currently authorized to work for any employer in the United States.

Job Close Date:

Open until filled.

Note to applicants: Please keep in mind that a job posted as 'Open until filled' may close at any time without notice. As such, we encourage you to submit your application and all required documentation as quickly as possible to ensure consideration for the posted position.

Are you ready to unleash YOUR potential?

As a next-generation public research university and Forbes-ranked top employer in Florida, we are a community of thinkers, doers, creators, innovators, healers, and leaders striving to create broader prosperity and help shape a better future. No matter what your role is, when you join Knight Nation, you'll play an integral role at one of the most impactful universities in the country. You'll be met with opportunities to connect and collaborate with talented faculty, staff, and students across 13 colleges and multiple campuses, engaging in impactful work that makes a positive difference. Your time at UCF will provide you with many meaningful opportunities to grow, you'll work alongside talented colleagues on complex projects that will challenge you and help you gain new skills and you'll have countless rewarding experiences that go well beyond a paycheck.

Working at UCF has its perks!UCF offers:

• 
  
• Benefit packages, including Medical, Dental, Vision, Life Insurance, Flexible Spending, and Employee Assistance Program.
  
• Paid time off, including annual (12-month faculty) and sick time off and paid holidays.
  
• Retirement savings options.
  
• Employee discounts, including tickets to many Orlando attractions.
  
• Education assistance.
  
• Flexible work environment.
  
• And more...For more benefits information, view the UCF Employee Benefits Guide click here.
  

Unless explicitly stated on the job posting, it is UCF's expectation that an employee of UCF will reside in Florida as of the date the employment begins.

Additional Requirements related to Research Positions:

Pursuant to Florida State Statute 1010.35, prior to offering employment to certain individuals in research-related positions, UCF is required to conduct additional screening. Applicants subject to additional screening include any citizen of a foreign country who is not a permanent resident of the U.S., or who is a citizen or permanent resident but is affiliated with or has had at least 1 year of education, employment, or training in China, Cuba, Iran, Russia, North Korea, Syria, or Venezuela.

The additional screening requirements only apply to research-related positions, including, but not limited to faculty, graduate positions, individuals compensated by research grants or contract funds, post-doctoral positions, undergraduate positions, visiting assistant professors, and visiting research associates.

Department

Work Schedule

Type of Appointment

Expected Salary

As a Florida public university, the University of Central Florida makes all application materials and selection procedures available to the public upon request.

UCF is proud to be a smoke-free campus and an E-Verify employer.

If an accommodation due to a disability is needed to apply for this position, please call or email .

For general application or posting questions, please email .

Wireman/Journeyman Electrician

Bacon Plumbing, Heating, Air & Electric is seeking a skilled Wireman/Journeyman Electrician responsible for installing, maintaining, repairing, and inspecting electrical systems in commercial, industrial and/or residential settings. You will work independently as well as with a team, ensuring code compliance, safety, quality workmanship, and excellent customer service.

Key Responsibilities

• Install, assemble, and maintain electrical systems (service panels, breakers, wiring, lighting systems, outlets, switches, transformers, generators, etc.).
• Read and interpret blueprints, building plans, electrical diagrams, and specifications to determine work procedures.
• Measure, cut, bend, and install conduit (EMT, PVC, rigid, etc.) and pull and terminate wiring using appropriate tools and methods.
• Install, repair, or replace electrical fixtures and equipment such as lighting fixtures, ceiling fans, outlets, switches, panels, and circuit breakers.
• Locate and mark electrical system layouts; cut or core openings in walls/floors as needed for routing conduit and wiring.
• Perform inspection and testing of electrical systems for continuity, voltage, resistance, grounding, and proper operation; troubleshoot and make corrections as required.
• Maintain and repair electrical infrastructure including branch circuits, feeders, service equipment, and low-voltage systems (if applicable).
• Supervise or assist apprentices or helpers as needed (depending on job site/team).
• Ensure adherence to local, state, and national electrical codes, safety regulations, and company policies (including OSHA and other safety standards).
• Maintain tools, equipment, and company vehicles in good working order.
• Maintain documentation of work performed, materials used, and job progress (work orders, parts requisitions, time sheets).
• Be available for scheduled on-call, emergency repair work, or after-hours work as needed.

Qualifications:

• Valid and active Wireman/Journeyman Electrician License issued by the Texas Department of Licensing and Regulation (TDLR) or equivalent.
• Industry-related knowledge and experience.
• Good communication and customer service skills.
• Proven sales experience in business-to-consumer home services sales.
• A progressive career path with home services trades experience.
• Strong knowledge of electrical tools, materials, components, and accepted practices.

Benefits

Bacon offers the following benefits in order to achieve a happy and healthy team culture together:

• Medical
• Dental
• Vision
• 401k with match
• Life Insurance
• PTO and paid holidays

Job Type: Full-time

Pay: Competitive salary + Bonus eligibility

Work Location: In person