Mechanical Engineering Vs Engineering Technology Jobs Remote Jobs in Usa
1,401 positions found
Salary range:
The UC academic salary scales set the minimum pay at appointment. See the following table for the current salary scale for this position: . TSP hourly rate $65. The current full-time salary range for Lecturer positions is $75,301 - $199,722. Starting salary is commensurate with highest degree, teaching experience, and equity within the department.
Percent time:
Lecturers: 7% to 100% in any given semester
TSP: Hourly (4 -40 hours per week)
Anticipated start:
Positions usually start in January, various times throughout the summer and August.
Position duration:
Positions can be one semester or academic year
Application Window
Open date: July 1, 2025
Most recent review date: Friday, Sep 26, 2025 at 11:59pm (Pacific Time)
Applications received after this date will be reviewed by the search committee if the position has not yet been filled.
Final date: Wednesday, Jul 1, 2026 at 11:59pm (Pacific Time)
Applications will continue to be accepted until this date, but those received after the review date will only be considered if the position has not yet been filled.
Position description
We are generating an applicant pool of qualified temporary instructors to teach regular and Summer Session courses, should an opening arise. In addition to lecturing responsibilities, general duties for these positions include laboratory teaching, holding regular office hours, assigning grades, advising students, and preparing course materials and exams.
We are also seeking applicants for Teacher Special Programs (TSP), should an opening arise. TSP instructors will be responsible for overseeing capstone projects in the Master of Engineering (MEng) program in the Department Mechanical Engineering. This includes: design and propose capstone projects and help match students into suitable projects. Meet with each capstone project team on a regular basis to review results, manage interpersonal aspects, and maintain efficient progress. Provide critical, constructive feedback on students' written reports and oral presentations. Coordinating and participating in the MS Plan II exam of each student at the end of the capstone project period. This pool encompasses engineering science and technology specializations relevant to both mechanical engineering and aerospace engineering.
Applicants are considered for positions as need arise; the existence of this pool does not guarantee that a position is available.
If you wish to remain in the pool after the final date, you will need to reapply.
Department:
Qualifications
Basic qualifications (required at time of application)
Basic qualifications for both positions: Master's degree or equivalent international degree at the time of application.
Additional qualifications (required at time of start)
Additional qualifications for both positions: Ph.D. or equivalent international degree by the start of the appointment and one or more years of teaching experience at the graduate level.
Preferred qualifications
Teaching experience offering undergraduate or graduate courses.
Ability to support the success of all students through inclusive curriculum, classroom environment, and pedagogy
Application Requirements
Document requirements
Curriculum Vitae - Your most recently updated C.V.
Cover Letter
Statement of Teaching - Please discuss prior teaching experience, teaching approach, and future teaching interests. This can include, for example, specific efforts, accomplishments, and future plans to support the success of all students through inclusive curriculum, classroom environment, and pedagogy
Reference requirements
- 2 required (contact information only)
Apply link:
JPF04971
Help contact:
About UC Berkeley
UC Berkeley is committed to diversity, equity, inclusion, and belonging in our public mission of research, teaching, and service, consistent with UC Regents Policy 4400 and University of California Academic Personnel policy (APM 210 1-d). These values are embedded in our Principles of Community, which reflect our passion for critical inquiry, debate, discovery and innovation, and our deep commitment to contributing to a better world. Every member of the UC Berkeley community has a role in sustaining a safe, caring and humane environment in which these values can thrive.
The University of California, Berkeley is an Equal Opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or protected veteran status.
For more information, please refer to the University of California's Affirmative Action and Nondiscrimination in Employment Policy and the University of California's Anti-Discrimination Policy.
In searches when letters of reference are required all letters will be treated as confidential per University of California policy and California state law. Please refer potential referees, including when letters are provided via a third party (i.e., dossier service or career center), to the UC Berkeley statement of confidentiality prior to submitting their letter.
As a University employee, you will be required to comply with all applicable University policies and/or collective bargaining agreements, as may be amended from time to time. Federal, state, or local government directives may impose additional requirements.
Unless stated otherwise, unambiguously, in the position description, this position does not include sponsorship of a new consular H-1B visa petition that would require payment of the $100,000 supplemental fee.
As a condition of employment, the finalist will be required to disclose if they are subject to any final administrative or judicial decisions within the last seven years determining that they committed any misconduct.
- "Misconduct" means any violation of the policies or laws governing conduct at the applicant's previous place of employment, including, but not limited to, violations of policies or laws prohibiting sexual harassment, sexual assault, or other forms of harassment or discrimination, as defined by the employer.
- UC Sexual Violence and Sexual Harassment Policy
- UC Anti-Discrimination Policy
- APM - 035: Affirmative Action and Nondiscrimination in Employment
Job location
Berkeley, CA
L3Harris is dedicated to recruiting and developing high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers' mission and quest for professional growth. L3Harris provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do.
L3Harris is the Trusted Disruptor in defense tech. With customers' mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security.
Job Title: Senior Specialist, Mechanical Engineering
Job Code: 33186
Job Location: Waco, TX (Onsite)
Job Schedule: 9/80
Job Description:
Mechanical engineers at L3Harris have the opportunity to engage in a wide variety of design activities over a broad range of aircraft (both fixed-wing and rotary-wing). Mechanical engineers are responsible for developing designs ranging from the integration of state-of-the-art airborne systems into special mission aircraft to developing specialized aircraft modifications. Engineers utilize 3D parametric CAD, rapid prototyping and other tools in the development of designs and validation of those designs. Engineers will produce technical drawings, procedures and other documents to thoroughly define the design. As an L3Harris engineer you will be involved in all phases of the product design, including concept development, detail design, manufacturing, installation on the aircraft and follow up with the customer.
The L3Harris organizational structure allows engineers to work on a variety of projects throughout their career at various levels of responsibility. This combined with a very diverse business base, from fixed-wing to rotary-wing aircraft, from state-of-the-art military technology to opulent head of state interiors, from aluminum to composite structures, the opportunity to broaden your engineering skill set and accelerate your career path is available at L3Harris Modernization and Modifications Group in Waco, TX.
Essential Functions:
- Design and liaison of aircraft primary and secondary structure utilizing military and commercial design standards, customer specifications and system requirements documents utilizing 3-dimensional CAD.
- Provide liaison to production and manufacturing for interpretation of engineering design/drawings.
- Conducting engineering drawing preparation and release within allocated schedule and budget constraints.
- Generating bids for customer requested change orders and new pursuits.
- Documenting and reviewing designs with peers, management, and customers.
- Strong knowledge of mechanical design principles for aircraft structure and components.
- Strong analytic and communication skills.
- Ability to work in aircraft and in an aircraft hangar environment. Ability to climb/board and work inside aircraft. Ability to bend, stoop, balance, kneel, crouch, reach, push, pull, grasp. Ability to work in narrow aisles or passageways.
- Ability to obtain and maintain a security clearance.
- Willingness and ability to work any shift, weekends, and overtime as required.
- Willingness and ability to travel as required (
- Bachelor's Degree in Mechanical Engineering or Aeronautical Engineering (or equivalent field) and minimum 6 years prior related experience. Graduate Degree with a minimum of 4 years of prior related experience. In lieu of a degree, minimum of 10 years of prior related experience.
- Minimum 4 years experience with the use of 3D CAD programs to create solid models and 2D detail, assembly, and installation drawings.
- Minimum 4 years experience with basic Microsoft Office software applications including Word and Excel.
- Must be a U.S. citizen
Preferred Additional Skills:- Active DoD Secret security clearance
- Mid-level knowledge of 3D CAD tools:
- Creo Parametric, Siemens NX or equivalent
- Familiarity with aircraft and military design standards such as:
- SAE AS50881, MIL-STD-704, MIL-E-7016, SAE ARP4754, MIL-STD-461, MIL-STD-810, MIL-STD-882, MIL-HDBK-516
- Ability to manage budgets and schedules, serve as a task leader within the team, and mentor junior team members for integration design and liaison.
#LI-AS1L3Harris Technologies is proud to be an Equal Opportunity Employer. L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law.
Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information.
By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions.
L3Harris Technologies is an E-Verify Employer. Please click here for the E-Verify Poster in English or Spanish. For information regarding your Right To Work, please click here for English or Spanish.
Duration: 10 months
Location: Boise, ID 83707
Worksite: Onsite | 8:00 AM - 05:00 PM
Responsibilities
We're looking for an Entry-Level Mechanical Engineer in Boise, ID who is excited about working on projects that enable the heart of our clients' business. Join us and you'll have the chance to work on projects including state of the art industrial and commercial facilities.
You'll be accountable for schedule and technical quality of challenging engineering tasks, as you gain familiarity with the client's expectations, scope, budget and schedule.
You'll also provide on-site assistance during startup, coordinating work activities with other staff members and the discipline lead.
Your multi-discipline, highly interactive team will successfully deliver on the design, development, application, evaluation, recommendation, and specification of engineered systems and products for building HVAC, Plumbing, and Fire Protection Systems.
Qualifications
Here's what you'll need:
- Bachelor's degree in Mechanical Engineering
Ideally, you'll also have:
- Engineer in Training (EIT)
- Working knowledge of Revit software preferred
- Strong communication skills both verbal and written
- Strong analytical and problem-solving skills
- Forward thinking, eager to learn best practices, and contribute with innovative ideas
- Displayed ability to learn quickly and driven to broaden knowledge base
- Ability to collaborate and work effectively in a variety of teams, including multi-disciplinary teams
- Passion for buildings and construction as the focus of this role will be industrial/manufacturing facilities
Comments / Special Instructions
Relocation bonus of $4,000 available to the right candidate.
Citizen, U.Person, or Immigration Status Requirements:
S. government issued security clearance is required prior to start date. S. citizens are eligible for a security clearance Security Clearance Type:
Secret Security Clearance Status:
Ability to obtain INTERIM U.S. government issued security clearance is required prior to start date At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today's mission and stay ahead of tomorrow's threat. Manufacturing Engineers develop and improve manufacturing processes by studying products and manufacturing methods. They analyze product specifications to determine appropriate designs and processes that support these customer requirements. Developing Manufacturing Data Packages (MDPs) including assembly instructions, workflow/routing, labor standards, tool, and fixture designs.
Supporting daily manufacturing areas with process troubleshooting, incorporation of engineering changes into the MDP.
Dispositioning non-conforming material with root cause and corrective action analysis as required.
Driving Continuous Improvement through process improvements to improve cycle time, reduce ergonomic risk to assemblers, automate, reduce costs (both direct and indirect) using Six Sigma principles and data driven decision making.
in-house as well as the supply base.
Typically requires a degree in Science, Technology, Engineering or Mathematics (STEM) and a minimum of 2 years of prior relevant experience. Experience in a manufacturing environment.
The ability to obtain and maintain a Bureau of Alcohol, Tobacco, Firearms and Explosives Access (ATF) clearance.
Technical drawing interpretation, Geometric Dimensioning and Tolerancing (GD&T).
Proficiency with CAD solid modeling tools (preference for CREO/ProE).
Demonstrated hands-on mechanical aptitude with the ability to work across disciplines.
Current DoD security clearance (secret).
Experience with automated tooling, machinery and programming.
Experience with Refurbishment and Repair requirements and processing of Government Furnished Material (GFM) or Equipment (GFE).
Proficient use of Microsoft Office suite (Excel, PPT, Project, Word).
Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. This includes all production and maintenance employees, as they are essential to the development of our products.
As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.
RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate's work experience, location, education/training, and key skills. Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement. Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company's performance. S. territory, the appropriate pay structure and benefits will apply. RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act.
Privacy Policy and Terms:
Click on this link to read the Policy and Terms
LocationAtlanta, Georgia
Full/Part TimeFull-Time
Regular/TemporaryTemporary
Add to Favorite JobsEmail this Job
About Us
Georgia Tech prides itself on its technological resources, collaborations, high-quality student body, and its commitment to building an outstanding and diverse community of learning, discovery, and creation. We strongly encourage applicants whose values align with our institutional values, as outlined in our Strategic Plan. These values include academic excellence, diversity of thought and experience, inquiry and innovation, collaboration and community, and ethical behavior and stewardship. Georgia Tech has policies to promote a healthy work-life balance and is aware that attracting faculty may require meeting the needs of two careers.
About Georgia Tech
Georgia Tech is a top-ranked public research university situated in the heart of Atlanta, a diverse and vibrant city with numerous economic and cultural strengths. The Institute serves more than 45,000 students through top-ranked undergraduate, graduate, and executive programs in engineering, computing, science, business, design, and liberal arts. Georgia Tech's faculty attracted more than $1.4 billion in research awards this past year in fields ranging from biomedical technology to artificial intelligence, energy, sustainability, semiconductors, neuroscience, and national security. Georgia Tech ranks among the nation's top 20 universities for research and development spending and No. 1 among institutions without a medical school.
Georgia Tech's Mission and Values
Georgia Tech's mission is to develop leaders who advance technology and improve the human condition. The Institute has nine key values that are foundational to everything we do:
1. Students are our top priority.
2. We strive for excellence.
3. We thrive on diversity.
4. We celebrate collaboration.
5. We champion innovation.
6. We safeguard freedom of inquiry and expression.
7. We nurture the wellbeing of our community.
8. We act ethically.
9. We are responsible stewards.
Over the next decade, Georgia Tech will become an example of inclusive innovation, a leading technological research university of unmatched scale, relentlessly committed to serving the public good; breaking new ground in addressing the biggest local, national, and global challenges and opportunities of our time; making technology broadly accessible; and developing exceptional, principled leaders from all backgrounds ready to produce novel ideas and create solutions with real human impact.
Job Summary
Provide support in the installation, operation and maintenance of computer systems. Position typically addresses a wide variety of applications, hardware, and networks. Specific duties will be determined based on assignment and unit needs. This position will interact on a consistent basis with: Unit management, faculty, and staffThis position typically will advise and counsel: users and other support personnelThis position will supervise: NA
Responsibilities
Job Duty 1 -
Install, maintain and upgrade workstation and peripheral hardware and software.
Job Duty 2 -
Analyze and resolve workstation, application, and server related problems.
Job Duty 3 -
Update desktop software/applications; maintain documentation on installed applications.
Job Duty 4 -
Provide users with assistance in working in specific applications.
Job Duty 5 -
Participate in development of standard operating procedures.
Job Duty 6 -
Perform other duties as assigned
Required Qualifications
Educational Requirements
Associate's Degree, Technical Diploma or equivalent combination of education and experience
Required Experience
Up to two years of job related experience
Knowledge, Skills, & Abilities
SKILLS
This job requires knowledge of and skill in the installation and maintenance of information technology hardware and software, requiring a full understanding of industry practices and campus policies and procedures. Included are skills in problem solving, decision making, customer service, system documentation and communications.
USG Core Values
The University System of Georgia is comprised of our 26 institutions of higher education and learning as well as the System Office. Our USG Statement of Core Values are Integrity, Excellence, Accountability, and Respect. These values serve as the foundation for all that we do as an organization, and each USG community member is responsible for demonstrating and upholding these standards. More details on the USG Statement of Core Values and Code of Conduct are available in USG Board Policy 8.2.18.1.2 and can be found on-line at policymanual/section8/C224/#p8.2.18_personnel_conduct.
Additionally, USG supports Freedom of Expression as stated in Board Policy 6.5 Freedom of Expression and Academic Freedom found on-line at policymanual/section6/C2653.
Equal Employment Opportunity
The Georgia Institute of Technology (Georgia Tech) is an Equal Employment Opportunity Employer. The Institute is committed to maintaining a fair and respectful environment for all. To that end, and in accordance with federal and state law, Board of Regents policy, and Institute policy, Georgia Tech provides equal opportunity to all faculty, staff, students, and all other members of the Georgia Tech community, including applicants for admission and/or employment, contractors, volunteers, and participants in institutional programs, activities, or services. Georgia Tech complies with all applicable laws and regulations governing equal opportunity in the workplace and in educational activities.
Equal opportunity and decisions based on merit are fundamental values of the University System of Georgia (USG) and Georgia Tech. Georgia Tech prohibits discrimination, including discriminatory harassment, on the basis of an individuals race, ethnicity, ancestry, color, religion, sex (including pregnancy), national origin, age, disability, genetics, or veteran status in its programs, activities, employment, and admissions. Further, Georgia Tech prohibits citizenship status, immigration status, and national origin discrimination in hiring, firing, and recruitment, except where such restrictions are required in order to comply with law, regulation, executive order, or Attorney General directive, or where they are required by Federal, State, or local government contract.
Other Information
This is not a supervisory position.
This position does not have any financial responsibilities.
This position will not be required to drive.
This role is not considered a position of trust.
This position does not require a purchasing card (P-Card).
This position will not travel
This position does not require security clearance.
Background Check
- Standard Enhanced
LocationAtlanta, Georgia
Full/Part TimeFull-Time
Regular/TemporaryTemporary
Add to Favorite JobsEmail this Job
About Us
Georgia Tech prides itself on its technological resources, collaborations, high-quality student body, and its commitment to building an outstanding and diverse community of learning, discovery, and creation. We strongly encourage applicants whose values align with our institutional values, as outlined in our Strategic Plan. These values include academic excellence, diversity of thought and experience, inquiry and innovation, collaboration and community, and ethical behavior and stewardship. Georgia Tech has policies to promote a healthy work-life balance and is aware that attracting faculty may require meeting the needs of two careers.
About Georgia Tech
Georgia Tech is a top-ranked public research university situated in the heart of Atlanta, a diverse and vibrant city with numerous economic and cultural strengths. The Institute serves more than 45,000 students through top-ranked undergraduate, graduate, and executive programs in engineering, computing, science, business, design, and liberal arts. Georgia Tech's faculty attracted more than $1.4 billion in research awards this past year in fields ranging from biomedical technology to artificial intelligence, energy, sustainability, semiconductors, neuroscience, and national security. Georgia Tech ranks among the nation's top 20 universities for research and development spending and No. 1 among institutions without a medical school.
Georgia Tech's Mission and Values
Georgia Tech's mission is to develop leaders who advance technology and improve the human condition. The Institute has nine key values that are foundational to everything we do:
1. Students are our top priority.
2. We strive for excellence.
3. We thrive on diversity.
4. We celebrate collaboration.
5. We champion innovation.
6. We safeguard freedom of inquiry and expression.
7. We nurture the wellbeing of our community.
8. We act ethically.
9. We are responsible stewards.
Over the next decade, Georgia Tech will become an example of inclusive innovation, a leading technological research university of unmatched scale, relentlessly committed to serving the public good; breaking new ground in addressing the biggest local, national, and global challenges and opportunities of our time; making technology broadly accessible; and developing exceptional, principled leaders from all backgrounds ready to produce novel ideas and create solutions with real human impact.
Job Summary
Provide support services in the operation and maintenance of an academic or research laboratory to include performing analyses; setup, operation, maintenance and cleaning of equipment; and maintaining stock of supplies. Specific duties will be determined based on assignment and unit needs. This position will interact on a consistent basis with: academic and/or research faculty members, staff and students This position typically will advise and counsel: lab users This position will supervise: NA
Responsibilities
Job Duty 1 -
Setup, operate and maintain instruments and other equipment used in performing lab tests and experiments.
Job Duty 2 -
Order supplies and materials as required; maintain records.
Job Duty 3 -
Setup laboratory media/equipment for demonstrations.
Job Duty 4 -
May clean instruments, glassware and other lab equipment.
Job Duty 5 -
Prepare and process laboratory samples for use in assigned tests.
Job Duty 6 -
Perform other duties as assigned
Required Qualifications
Educational Requirements
High school diploma, GED Certificate or Vocational School Diploma
Required Experience
Up to two years of job related experience
Knowledge, Skills, & Abilities
SKILLS
This job requires working knowledge in the use of instrumentation and other lab equipment, laboratory processes and procedures specific to assigned lab. Skills in inventory management and the use of specialized computer applications is required.
USG Core Values
The University System of Georgia is comprised of our 26 institutions of higher education and learning as well as the System Office. Our USG Statement of Core Values are Integrity, Excellence, Accountability, and Respect. These values serve as the foundation for all that we do as an organization, and each USG community member is responsible for demonstrating and upholding these standards. More details on the USG Statement of Core Values and Code of Conduct are available in USG Board Policy 8.2.18.1.2 and can be found on-line at policymanual/section8/C224/#p8.2.18_personnel_conduct.
Additionally, USG supports Freedom of Expression as stated in Board Policy 6.5 Freedom of Expression and Academic Freedom found on-line at policymanual/section6/C2653.
Equal Employment Opportunity
The Georgia Institute of Technology (Georgia Tech) is an Equal Employment Opportunity Employer. The Institute is committed to maintaining a fair and respectful environment for all. To that end, and in accordance with federal and state law, Board of Regents policy, and Institute policy, Georgia Tech provides equal opportunity to all faculty, staff, students, and all other members of the Georgia Tech community, including applicants for admission and/or employment, contractors, volunteers, and participants in institutional programs, activities, or services. Georgia Tech complies with all applicable laws and regulations governing equal opportunity in the workplace and in educational activities.
Equal opportunity and decisions based on merit are fundamental values of the University System of Georgia (USG) and Georgia Tech. Georgia Tech prohibits discrimination, including discriminatory harassment, on the basis of an individuals race, ethnicity, ancestry, color, religion, sex (including pregnancy), national origin, age, disability, genetics, or veteran status in its programs, activities, employment, and admissions. Further, Georgia Tech prohibits citizenship status, immigration status, and national origin discrimination in hiring, firing, and recruitment, except where such restrictions are required in order to comply with law, regulation, executive order, or Attorney General directive, or where they are required by Federal, State, or local government contract.
Other Information
This is not a supervisory position.
This position does not have any financial responsibilities.
This position will not be required to drive.
This role is not considered a position of trust.
This position does not require a purchasing card (P-Card).
This position will not travel
This position does not require security clearance.
Background Check
- Standard Enhanced
Position Title: Manufacturing Engineering Intern
Department: Engineering
Reports to: Manufacturing Engineering Manager
Classification: Non-Exempt
POSITION SUMMARY:
As a Manufacturing Engineering Intern, you will gain hands-on experience supporting the design, documentation, and improvement of products and manufacturing processes. You will work closely with engineering and production teams to help translate concepts into manufacturable designs while ensuring products are built efficiently and to high quality standards. This role offers the opportunity to develop CAD drawings, create technical documentation, assist with manufacturing tooling and fixtures, and collaborate with the production team to solve real-world engineering challenges on the factory floor.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
- Create and update 2D and 3D CAD drawings.
- Develop technical documentation such as work instructions, quality plans, and engineering documentation for internal and external use.
- Assist in building manufacturing and welding fixtures according to engineering drawings.
- Collaborate with manufacturing team members to troubleshoot and solve production challenges.
- Provide hands-on support on the production floor when needed.
- Assist engineering team with continuous improvement and product development activities.
- Perform other duties as assigned.
QUALIFICATIONS:
- Intermediate AutoCAD skills.
- Intermediate proficiency in Microsoft Excel and Word.
- Strong attention to detail and organizational skills.
- Self-motivated with the ability to manage and complete projects independently.
- Team-oriented with a willingness to support colleagues when needed.
- Strong written and verbal communication skills.
- Ability to work in a fast-paced, multi-tasking environment.
EDUCATION AND EXPERIENCE:
- High school diploma required.
- Currently enrolled in a Mechanical Engineering or Engineering Technology program preferred.
- Minimum of two years of CAD experience through coursework or work experience.
- Prior exposure to manufacturing environments preferred.
- Hands-on experience with shop equipment such as drill presses, saws, or welding equipment preferred.
- Machine shop experience preferred.
- Valid Michigan driver’s license.
PHYSICAL DEMANDS:
The physical demands described here are representative of those required to successfully perform the essential functions of this job.
- Regularly required to talk and hear.
- Frequently required to sit, stand, walk, and use hands to handle tools or materials.
- Occasionally required to climb, balance, stoop, kneel, crouch, or crawl.
- Frequently lift and/or move up to 25 pounds and occasionally up to 40 pounds.
- Requires close vision, distance vision, color vision, and the ability to adjust focus.
WORK ENVIRONMENT:
This position works primarily in a manufacturing environment that includes assembly and welding operations. Interns will spend time both in the engineering workspace and on the production floor collaborating with the manufacturing team. Noise levels may occasionally be loud, and the environment may include typical manufacturing conditions such as dust.
NOTICE:
OMT-Veyhl USA Group of companies is committed to providing access, equal opportunity, and reasonable accommodation for qualified applicants in all employment decisions.
This job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee. Duties, responsibilities, and activities may change or new ones may be assigned at any time with or without notice.
Driven by a unique Purpose, Culture, and Value Delivery Model, we enable meaningful connections between talented professionals and forward-thinking organizations.
Since our formation in 2002, organizations across commercial and public sectors have been trusting us to help build their teams with exceptional temporary and permanent talent.
Visit us at to learn more and view our open positions.
Please apply or call one of us to learn more For further inquiries regarding the following opportunity, please contact our Talent Specialist, Marshelin at (224) 507-1280 Title: Mechanical Engineer (Manufacturing / Equipment) Duration: 12 Months Location: On-site in Newton, NC Travel Requirements: Expected to be on-site in the plant during the week Travel to a supplier or vendor may be required for equipment check-out before shipment Work Schedule: Typical 40 hours per week.
May require working weekends/holidays or longer days to support installation schedule Only W2 candidates are eligible for this position.
Third-party or C2C candidates will not be considered.
Description Comments: 1) Candidates local to the NC region are preferred but Client is willing to consider candidates outside the local region who are willing to relocate at their own expense.
2) Candidates must be eligible to work in the US for at least 18 months.
Top skills: Experience with high-speed cable manufacturing equipment is a plus but not required (jacketing, ribbon stranding, buffering) Experience with mechanical equipment design, install, start-up and debug in a high-volume manufacturing environment.
Candidate must have 5 years demonstrated leadership experience with coordinating scheduling, workflows, etc..
Managing mechanical and electrical trades (both internal and external) executing equipment install and debug.
Skilled with use of design software (AutoCAD, Solidworks, Inventor) Scope of Position: A mechanical engineer responsible for leading and providing hands-on mechanical support for the installation, start-up and debug of high-cable manufacturing process equipment.
This includes working with a multi-functional team (mechanical, electrical, controls, facilities, IT, operations, etc.) Involves the application of mechanical principles encompassed in mechanics, hydraulics, thermodynamics, metallurgy, and machine design used for the design, production, operation, and use machinery of all types.
Requirements: Experience with high-speed cable manufacturing equipment is a plus but not required (jacketing, ribbon stranding, buffering) Experience with mechanical equipment design, install, start-up and debug in a high-volume manufacturing environment Managing mechanical and electrical trades executing equipment install and debug.
Skilled with use of design software (AutoCAD, SolidWorks, or Inventor) Knowledge of machine guarding and safety practices and standards (OSHA, ANSI, ASME, etc) OSHA 30 Certification desired Good written and oral communication skills Ability to collaborate and work with diverse teams (skills, gender, culture, race, etc.) Capable of multitasking Ability to work with minimal direction Independently determines and develops approaches to solutions Familiarity with other engineering disciplines (electrical, civil, process, etc.) Key Responsibilities Coordinating the task and workplan for team members to meet customer schedule Providing hands on input and insight into equipment installation and troubleshooting Support start-up and qualification of equipment Verifying equipment build and layout against drawings Coordinating installation plan with safety and plant receivers Conferring with Client engineers and vendors to resolve equipment install or build discrepancies Ensure safe work practices Updating drawings and equipment documentation Education: BS in Mechanical Engineering, Mechatronics, Mechanical Technology Minimum Experience: 5 Years Interview process: Initial teams meeting with manager, then onsite interview if local.
If not local, interview will be by teams.
Local candidates are strongly preferred.
About us: DivIHN, the 'IT Asset Performance Services' organization, provides Professional Consulting, Custom Projects, and Professional Resource Augmentation services to clients in the Mid-West and beyond.
The strategic characteristics of the organization are Standardization, Specialization, and Collaboration.
DivIHN is an equal opportunity employer.
DivIHN does not and shall not discriminate against any employee or qualified applicant on the basis of race, color, religion (creed), gender, gender expression, age, national origin (ancestry), disability, marital status, sexual orientation, or military status.
Manufacturing, Solidworks, Inventor, AutoCad, multitasking
Design and Mechanical Engineer – Medical Devices
Join a global leader medical device company. Design and manufacture technology used in spine and orthopedic surgeries
You will work on the design and development of surgical implants and instruments, collaborating with engineers, surgeons, and cross-functional teams to bring innovative products to market.
Full‐time | W2 | M-F 8am- 5pm | On site Audubon PA (outside of Philadelphia)
Qualifications
- 4+ years of mechanical and medical device design engineering experience.
- II and III medical device experience
- Experience with CREO or SolidWorks for mechanical design and documentation.
- Experience working within regulated environments (ISO 13485 / FDA).
- Ability to work in both engineering and clinical environments, including operating rooms and labs
- Bachelor's degree in Mechanical Engineering, Biomedical Engineering, Bioengineering, or related field.
Benefits:
Visa sponsorship supported within US
W2 contract
Audubon, PA (outside Philadelphia)
Bonus for relocation within US and annual bonuses
Work directly with surgeons
Full product development lifecycle exposure
Key Responsibilities
Product Development
- Lead the design and development of surgical instruments and implants using CAD software (CREO).
- Develop and maintain project plans and FDA-compliant Design History Files (DHF).
- Perform design verification and validation to ensure designs meet technical specifications.
- Manage assigned projects to ensure timely completion while maintaining compliance with regulatory requirements.
- Collaborate with internal prototype teams and external vendors for rapid prototyping and testing.
- Support preparation of regulatory submissions to the FDA.
Customer Engagement
- Work directly with surgeons and clinical users to gather product feedback and translate clinical needs into design requirements.
- Participate in product launches, sales training, and customer visits.
- Support surgical cases in the operating room to observe device performance and identify opportunities for improvement.
Cross-Functional Collaboration
- Partner with marketing and product management to develop market strategies and forecasts.
- Collaborate with operations and manufacturing to support production and commercialization.
- Conduct competitive and industry research to ensure innovative product development.
Product Lifecycle & Sustaining
- Support the lifecycle management of commercialized products.
- Drive design improvements, cost reduction initiatives, and engineering changes.
- Work closely with Quality, Regulatory, Manufacturing, and Supply Chain teams to ensure product performance and compliance.
The IN group is here to support you specifically with the recruitment and hiring process for job opportunities. Our role is focused on guiding you through these steps. If you have any questions related to your application or next steps in the hiring process,
Apply, and please feel free to reach out.
We're building safety-enhancing technology for aviation that will save lives. Automated aviation systems will enable a future where air transportation is safer, more convenient and fundamentally transformative to the way goods - and eventually people - move around the planet. We are a team of mission-driven engineers with experience across aerospace, robotics and self-driving cars working to make this future a reality.
As an Avionics Mechanical Engineer at Reliable Robotics, you will be a part of the Vehicle Design and Integration team and will report to the Vehicle Design and Integration Manager. This team is a small group of highly motivated people designing, testing, and flying advanced mechanical systems. The harness engineer is a very cross-functional role at the convergence of the avionics, mechanical, integration, and production teams, with significant hands-on work designing, building, integrating, and testing our harnesses, enclosures, and mounting hardware; expect to broaden your design and application experience. This position will be located at our facility in Mountain View, California.
Responsibilities
In your role as Avionics Mechanical Engineer you will work with the avionics, mechanical, and integration teams to define the hardware interfaces, design the detailed harnesses including definition of the harness routing, design and test enclosures for environmental protection, and design the structural mounts for securing the hardware in the airplane. You'll have the opportunity to design, install, and test your hardware on a remotely operated aircraft, and you'll be an instrumental part of how our hardware teams come together on the airplane.
Basic Success Criteria
BS in Mechanical Engineering, Electrical Engineering, or equivalent industry experience
2+ years experience in mechanical or avionics hardware design
Ability to route harnessing (both in CAD and physically in the airplane) in a strategic manner
Experience working with connectors, backshells, EMI shielding, and cable/wire protection methods
Experience designing and analyzing structural mounts
A love of spatial packaging
Be logical, inquisitive, and eager to both teach and learn
Preferred Criteria
4+ years experience in harness design and avionics packaging
Experience performing design trades for and detail design of aerospace flight harnesses
Experience with NX routing and Capital Harness Designer
Experience designing avionics enclosures
Experience working on certification-path aviation development projects
Experience testing hardware to DO-160 requirements
The position will be located at our facility in Mountain View, California. Must be willing to travel up to 10% of the time.
The estimated salary range for this position is $118,000 to $170,000/annual salary + cash and stock option awards + benefits. At Reliable Robotics, we strive to provide competitive and rewarding compensation based on experience and expertise, as well as market conditions, location, and pay equity.
In addition to base compensation, Reliable Robotics offers stock options, employee medical, 401k contribution, great co-workers and a casual work environment.
This position requires access to information that is subject to U.S. export controls. An offer of employment will be contingent upon the applicant's capacity to perform in compliance with U.S. export control laws.
All applicants are asked to provide documentation that legally establishes status as a U.S. person or non-U.S. person (and nationalities in the case of a non-U.S. person). Where the applicant is not a U.S. person, meaning not a (i) U.S. citizen or national, (ii) U.S. lawful permanent resident, (iii) refugee under 8 U.S.C. * 1157, or (iv) asylee under 8 U.S.C. * 1158, or not otherwise permitted to access the export-controlled technology without U.S. government authorization, the Company reserves the right not to apply for an export license for such applicants whose access to export-controlled technology or software source code requires authorization and may decline to proceed with the application process and any offer of employment on that basis.
At Reliable Robotics, our goal is to be a diverse and inclusive workforce. As an Equal Opportunity Employer, we do not discriminate on the basis of race, religion, color, creed, ancestry, sex, gender (including pregnancy, childbirth, breastfeeding, or related medical conditions), gender identity, gender expression, sexual orientation, age, non-disqualifying physical or mental disability or medical conditions, national origin, military or veteran status, genetic information, marital status, or any other basis covered by applicable law. All employment and promotion is decided on the basis of qualifications, merit, and business need.
If you require reasonable accommodation in completing an application, interviewing, completing any pre-employment testing, or otherwise participating in the employee selection process, please direct your inquiries to
Compensation Range: $118K - $170K
Apply for this Job