Material Control Examples Jobs in Usa

Job Summary

Electrical Controls Engineers at client design, program, implement, troubleshoot, and improve our electronic control systems to better automate, control, and monitor our production processes. The Electrical Controls Engineer applies comprehensive electrical engineering skills and industry experience in support of the design, fabrication, and implementation of new equipment. They need to be proficient in a variety of logic control hardware, HMI’s and programming software, as well as the associated sensors, vision systems, motors, drives, actuators, and industrial communication networks. They are responsible for writing, troubleshooting, and modifying our ladder logic programs that control the way our equipment operates. They further provide expert-level troubleshooting support on existing automated equipment as a backstop for our maintenance technicians. Depending on the complexity of the equipment needed, they may additionally serve as the project lead for an entire piece of automated equipment, and thus may also coordinate activities for internal mechanical designers and/or external contractors to deliver a turn-key piece of production equipment.

Primary Responsibilities

• Design and program new and/or upgraded control systems for our manufacturing equipment to be used on both new and existing products.
• Provide tier 3 troubleshooting support to maintenance technicians on particularly difficult equipment problems.
• Define and document requirements for new control systems and control system upgrades.
• Mock-up prototype equipment and control systems in order to evaluate the ability of designs to achieve their intended purpose.
• Prepare design review documentation to facilitate peer and leadership review
• Document control systems using control schematics, electrical diagrams, panel layouts, and through meticulous software program comments.
• Develop and perform system verification and validation tests to ensure safe and proper functioning.
• Provide guidance, mentoring, and assistance to peers and junior engineers and technicians.
• Coordinate with Program Managers, R&D, Engineering and Management to prepare detailed plans and estimates for equipment in support of capital expenditure requests.
• Prepares statements of work and compile cost estimates for new control equipment
• Assists with make/buy decisions and oversee the design and build process for outsourced systems.
• Stays informed concerning new technologies, materials and equipment, and investigates potential applications.
• Maintain the highest ethical standards, even when challenged from above.
• Understand and live by Armtec’s ethics and business conduct policies.

Education & Professional Work Experience Requirements

• Must be authorized to work in the U.S.
• To conform to U.S. export control regulations, applicant should be eligible for any required authorization from the U.S. Government.
• QualificationsBachelor’s degree in an engineering discipline with 5+ years of controls engineering experience required.
• Demonstrated experience in designing and deploying automated control systems in a manufacturing environment.
• Ladder Logic programming experience using RSLogix 500, and Studio 5000
• HMI development experience, prefer experience with FactoryTalk View Studio
• Demonstrated ability to troubleshoot AC/DC electrical equipment problems and perform system tests.
• Experience with creating electrical schematics and control system diagrams. Autocad Electrical experience is preferred.
• Prefer experience implementing Allen Bradley Micrologix, and CompactLogix PLC’s and various touchscreen HMI panels, such as Panelview and C-more HMI’s.
• Additional experience with various Industrial networks is a plus.
• Additional experience with Cognex Vision inspection system and experience with various servo drive/controllers is a plus

At HelloFresh, we want to change the way people eat forever by offering our customers high-quality food and recipes for different meal occasions. Over the past 10 years, we've seen this mission spread around the world and beyond our wildest dreams. Now, we are a global food solutions group and the world's leading meal kit company, active in 18 countries across 3 continents. So, how did we do it? Our weekly boxes full of exciting recipes and fresh ingredients have blossomed into a community of customers looking for delicious, healthy, and sustainable options. The HelloFresh Group now includes our core brand, HelloFresh, as well as: Green Chef, EveryPlate, Chefs Plate, Factor_, and Youfoodz.

As an Industrial Control Systems and Automation Program Manager, you will work with the maintenance teams to deep dive issues and opportunities within the control systems for conveyance, sortation systems, automated baggers, robotic systems, and more. You will develop instructor led technical training materials on these systems and deliver training to controls and automation technicians across the network. You will also provide technical support and serve as the Installation and Operational Qualification controls lead for new launch sites. This role is the resident expert in automation and controls, and will lead the technical training program.

You will..

• Demonstrated hands-on experience within controls or automation environments
• Exposure to supporting live systems or production operations
• Experience mentoring, coaching, or developing technical team members
• Expected to support and develop other controls engineers and serve as a point of escalation for all of our brands, and a baseline level of hands-on controls experience
• Practical exposure to PLC troubleshooting and diagnostics
• Maintain compliance with all safety, food safety, and security standards.
• Create and execute training classes specifically focused on technicians' needs.
• Review and give input on vendor quotes, service level agreements, and planned maintenance agreements.
• Travel to multiple locations to provide instructor led training to controls technicians.
• Participate in the interview and selection process for controls technicians.
• Perform troubleshooting of assigned equipment and provide corrective action plans when deficiencies are identified.
• Act as an escalation point and remote troubleshooting resource for controls technicians and escalate to leadership and/or vendors as needed for additional troubleshooting.
• Drive compliance on relevant OSHA, NFPA70E, and NEC regulations.
• Document all work in the computerized maintenance management system (CMMS) and ticketing systems as appropriate.
• Mentor all maintenance personnel in developing appropriate skill sets and knowledge of equipment, specializing in controls and automation systems.
• Act as a network resource for controls related technical issues and lead network-wide root cause analysis.
• Partner with Engineering on the commissioning of new systems.
• Audit vendor work to provide feedback to leadership on quality of work and SLA performance.
• Write and/or modify PMs to standardize across the network and increase effectiveness.
• Perform building project work as assigned..

Mandatory Requirements

You have..

• 5 - 7 years of experience maintaining and repairing large control systems, including PLCs, HMIs, VFDs, fieldbus, reader/vision systems.
• Advanced understanding of electrical and mechanical troubleshooting.
• Advanced computer skills, including Microsoft Office.
• Knowledge of general construction standards and techniques.
• Ability to read and understand drawings, schematics, and diagrams.
• In depth experience and knowledge of industrial OSHA, NFPA70E, and NEC requirements.
• Ability to travel as necessary (up to 75%) for business purposes.
• High School diploma or equivalent.

• The ability to motivate learning and thrive in a teaching/training role.
• Acute understanding of electro-mechanical circuitry and it's functionality.
• Excellent follow through, judgment, and common sense. "Make it happen" attitude.
• Comfortable working in cold environments with some areas of facility at 40F.
• Excitement for working in a start-up environment with a high level of ambiguity and change.
• High level of integrity and ethics with excellent follow-through.

You'll get...

• Competitive Salary & 401k company match that vests immediately upon participation

• Generous parental leave of 4 weeks & PTO policy, as well as paid holidays off

• $0 monthly premium and other flexible health plans

• Amazing discounts, including up to 75% off HelloFresh subscription

• Flexible scheduling & advancement opportunities

• Emergency child and adult care services

• Snacks & monthly catered lunches

• Collaborative, dynamic work environment within a fast-paced, mission-driven company

This job description is intended to provide a general overview of the responsibilities. However, the Company reserves the right to adjust, modify, or reassign work tasks and responsibilities as needed to meet changing business needs, operational requirements, or other factors.

Colorado Pay Range

$95,890—$115,400 USD

Texas Pay Range

$89,200—$107,350 USD

Newark, NJ Pay Range

$102,600—$123,450 USD

Arizona Pay Range

$89,200—$107,350 USD

Illinois Pay Range

$95,890—$115,400 USD

About HelloFresh

We believe that sharing a meal brings people of all identities, backgrounds, and cultures together. We are committed to celebrating all dimensions of diversity in the workplace equally and ensuring that everyone feels a sense of inclusion and belonging. We also aim to extend this commitment to the partners we work with and the communities we serve. We are constantly listening, learning, and evolving to deliver on these principles. We are proud of our collaborative culture. Our diverse employee population enables us to connect with our customers and turn their feedback into meaningful action - from developing new recipes to constantly improving our process of getting dinner to our customers' homes. Our culture attracts top talent with shared values and forms the foundation for a great place to work!

At HelloFresh, we embrace diversity and inclusion. We are an equal-opportunity employer and do not discriminate on the basis of an individual's race, national origin, color, gender, gender identity, gender expression, sexual orientation, religion, age, disability, marital status, or any other protected characteristic under applicable law, whether actual or perceived. As part of the Company's commitment to equal employment opportunity, we provide reasonable accommodations, up to the point of undue hardship, to candidates at any stage, including to individuals with disabilities.

We want to adapt our processes and create a safe space that welcomes everyone so please let us know how we can accommodate our process. In case you have any accessibility requirements you can share that with us in the application form.

To learn more about what it's like working inside HelloFresh, follow us on Instagram and LinkedIn.

HelloFresh is committed to the principles of equal employment opportunity and providing reasonable accommodations to candidates with disabilities. If you need an accommodation during the application process, please reach out to us at:

• Europe:
• APAC:
• United States:
• Canada:

Benefits to Joining Our Team

CPG offers a competitive and comprehensive package that includes additional benefits beyond enhanced medical, dental, and vision coverage

• 
  
• Health Benefits - (Medical, Dental & Vision Insurance)
  
• Flexible Spending Account Options
  
• 401K Plan
  
• Employer paid Life & Disability Insurance
  
• Paid Time Off
  
• Employee Referral Program
  
• Employee Assistance Program (EAP)
  

CPG is an equal opportunity employer. We will consider all employment applicants without attention to age, race, color, religion, sex, sexual orientation, gender identity, national origin, veteran, or disability status.

Learn more about CPG by checking out our website here

#LI-TG1

As an Inventory Control Supervisor, you will lead and oversee inventory control operations in a 3PL warehouse environment. Your role is critical in minimizing inventory discrepancies and supporting operational efficiency.

Major Duties and Responsibilities:

• Ensure all products are properly accounted for and inventory levels are maintained with the highest degree of accuracy.
• Supervise inventory control staff, coordinate warehouse operations, and collaborate with management to develop and enforce inventory control policies, procedures, and best practices.
• Supervise daily inventory control activities including counting, recording, and verifying stock levels.
• Lead efforts to identify, investigate, and resolve inventory discrepancies and root cause issues.
• Ensure accurate and timely updates to inventory records in warehouse management systems (WMS).
• Schedule and oversee regular cycle counts and full inventory audits.
• Generate, analyze, and present reports on inventory levels, variances, and trends.
• Train, coach, and evaluate inventory control staff to ensure compliance with procedures and improve performance.
• Collaborate with warehouse leadership to align inventory practices with operational goals.
• Develop and implement continuous improvement strategies to enhance inventory accuracy and efficiency.
• Maintain a clean, safe, and organized inventory area in accordance with company standards.
• Comply with the requirements of the company's Quality Management System.

Required Skills, Experience, and Education:

• High school diploma
• 2-4+ years of experience in inventory control, warehouse operations, or logistics industry
• Supervisory or leadership experience
• Proficient with warehouse management systems (WMS) and inventory control software

Desired Skills, Experience, and Education:

• Strong leadership and team management capabilities.
• Excellent analytical and problem-solving skills.
• Ability to perform and oversee mathematical inventory calculations and data analysis.
• Proficient in Microsoft Office Suite and other relevant software applications.
• Strong written and verbal communication skills.
• Ability to prioritize tasks, multitask effectively, and work under pressure.
• High attention to detail and commitment to accuracy.
• Understanding safety standards and regulatory compliance related to inventory management.

Physical Requirements:

• Lift, carry, and move materials up to 50 pounds
• Remain in a stationary/seated position for an extended period.
• Regularly required to operate a computer, telephone, keyboard, and other office machinery.
• Specific vision abilities required by this job include close vision requirements due to computer work.
• The ability to hear, understand, and distinguish speech and/or other sounds.

Pegasus Logistics Group is breaking the mold and we want employees as passionate and diverse as we are.

Pegasus Logistics Group is an equal opportunity employer and we value diversity at our company. We do not discriminate on the basis of race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status or disability status.

BEPC Inc. provides Specialized Engineering Solutions and IT Project Management services to Fortune 500 companies in the Life Science and Technology industries. BEPC Mexico, a division of BEPC Incorporated, provides and manages consulting services for Automotive and Medical device companies throughout Mexico and around the globe.

The Senior Automation & Controls Engineer is responsible for leading the design, development, implementation, validation, and continuous improvement of automated equipment and control systems. This role combines strong technical expertise in PLC-based automation, electrical and pneumatic systems, equipment validation, and project leadership within regulated manufacturing environments, preferably in the medical device industry.

KEY RESPONSABILITIES:

• Lead and manage electrical and control system projects, ensuring alignment with scope, budget, and schedule.
• Design, develop, program, and troubleshoot PLC-based control systems (Allen-Bradley, Siemens, Keyence, Beckhoff, Schneider).
• Develop and implement HMI/SCADA applications (FactoryTalk View, Aveva Edge, Ignition, TIA Portal, etc.).
• Integrate VFDs, servo systems, motion control, robots (e.g., Mitsubishi), and machine vision systems (Cognex, Keyence, DataMan).
• Participate in the design and implementation of new automated equipment and capacity expansion projects.
• Execute and oversee Factory Acceptance Tests (FAT), User Acceptance Tests (UAT/BUAT), and internal testing activities.
• Lead and support equipment validation activities (IQ, OQ, PQ) in compliance with FDA and ISO 13485 standards.
• Ensure proper integration with Manufacturing Execution Systems (MES) and Warehouse Control Systems (WCS), when applicable.
• Generate and maintain technical documentation, including BOMs, electrical schematics, panel layouts, validation protocols, and reports.
• Perform advanced troubleshooting of electrical, pneumatic, mechanical, and control systems.
• Oversee preventive and corrective maintenance strategies to improve equipment reliability and efficiency.
• Collaborate cross-functionally with Manufacturing, Quality, R&D, Maintenance, and external stakeholders.
• Provide technical leadership, delegate tasks effectively, and mentor junior engineers and technicians.
• Support continuous improvement initiatives focused on efficiency, safety, and process optimization.
• Ensure compliance with safety and regulatory requirements in regulated manufacturing environments.

QUALIFICATIONS:

• Bachelor’s degree in electrical engineering, Mechatronics, Automation, Mechanical Engineering, or related field.
• 7+ years of experience in industrial automation and controls engineering.
• Strong expertise in PLC programming (Allen-Bradley, Siemens; others desirable).
• Advanced knowledge of electrical controls, schematics, and pneumatic systems.
• Experience with servo systems, VFDs, motion control, and robotics integration.
• Experience in executing FAT, UAT, and equipment validation (IQ/OQ/PQ).
• Proficiency in AutoCAD / AutoCAD Electrical.
• Strong troubleshooting skills in automation and manufacturing systems.
• Ability to manage multiple concurrent projects.
• Upper-intermediate to advanced English proficiency (written and spoken).
• Availability to work on a 2–3 month fixed-term contract.
• Authorized to work in the location where the position is posted. Be a U.S. Citizen, Permanent Resident, or hold a valid TN Visa.

PREFERRED QUALIFICATIONS:

• Strong project planning, budgeting, and stakeholder communication skills.
• Experience in warehouse automation, material handling, or the post/parcel sector.
• Knowledge of networking protocols (Ethernet/IP, Profinet, Serial).
• 3+ years of experience in regulated environments (medical device preferred).
• Experience with MES/WCS integration.
• Familiarity with FDA regulations and ISO 13485.

Job Title: Fabrication Quality Control (QC) Manager

Location: Long Beach, MS (Open to Relocation)

Employment Type: Direct Hire

Work Environment: 100% Onsite

Travel: 0–5% local travel to fabrication shop, office, or job sites as needed

Compensation

• Salary: $102,000 – $136,000 annually (based on experience)
• Bonus: Discretionary annual bonus

Position Summary

Wheeler Staffing Partners is seeking an experienced Fabrication Quality Control (QC) Manager to oversee and manage quality control and assurance processes for fabrication operations supporting industrial and process piping projects. This role provides technical leadership to ensure fabricated products meet industry standards, regulatory requirements, project specifications, and client expectations.

The QC Manager will work closely with estimating, engineering, and fabrication teams to ensure consistent quality, compliance with applicable codes, and continuous improvement in fabrication processes. The ideal candidate has experience within pipe fabrication, process piping, or mechanical subcontractor environments, along with strong knowledge of engineering drawings, fabrication methods, and estimating standards.

Key Responsibilities

Quality Control Leadership

• Develop, implement, and maintain quality control standards and procedures aligned with industry codes, project specifications, and client requirements
• Oversee daily inspection of machinery, equipment, fabrication processes, and working conditions to ensure compliance with quality and regulatory standards
• Prepare daily inspection reports and provide recommendations for corrective actions when quality issues are identified
• Establish and maintain quality assurance policies, procedures, and quality manuals supporting ISO 9001:2015 and ASME certification standards

Fabrication Quality Oversight

• Perform and document in-process inspections and verification for piping, plumbing, and sheet metal fabrication
• Ensure fabricated products meet project design specifications, applicable codes, and client requirements
• Inspect fabrication documentation and maintain records required for quality compliance and project documentation
• Prepare project turnover documentation and quality packages for completed work

Welding & NDE Management

• Test and certify welders and welding procedures according to applicable codes
• Maintain welder continuity logs in compliance with industry standards
• Coordinate and schedule contract Non-Destructive Examination (NDE) testing as required

Regulatory Compliance

• Ensure all quality control activities comply with industry regulations, codes, and project standards
• Monitor regulatory changes affecting fabrication and piping standards and communicate updates to internal teams

Data Analysis & Continuous Improvement

• Analyze quality metrics, trends, and performance data to identify opportunities for process improvement and defect reduction
• Conduct root cause analysis and support corrective and preventative actions
• Lead or support cross-functional quality improvement initiatives that enhance operational efficiency and product quality

Estimating & Bid Support

• Review Requests for Quotation (RFQs) and assist estimating teams with quality requirements and bid specifications
• Support cost estimating efforts related to fabrication processes and project requirements
• Utilize established KPI metrics to determine performance factors and labor hour calculations during estimate development

Cross-Functional Collaboration

• Partner with estimating, engineering, project planning, and fabrication teams to resolve quality concerns and implement corrective actions
• Support development of fabrication strategies for new projects or process improvements

Training & Team Development

• Provide training, coaching, and mentorship to quality control personnel and fabrication staff on quality standards and best practices
• Promote a culture of safety, quality, and continuous improvement throughout fabrication operations

Required Qualifications

• 5+ years of quality control experience within pipe fabrication, industrial/process piping, or mechanical subcontractor environments
• Experience working in a fabrication shop environment
• Ability to read and interpret engineering drawings, specifications, and fabrication documentation
• Experience with cost estimating related to fabrication and piping work
• Knowledge of pipe fabrication methods, materials, and project specifications
• Familiarity with process piping unit rates and estimating references such as ’73 Price Book or Page & Nations
• Strong analytical, documentation, and quality inspection skills
• Ability to manage multiple projects in a fast-paced fabrication environment

Preferred Qualifications

• Experience with modular estimating
• Experience utilizing KPI metrics for labor hour build-up and performance factors
• Certified Welding Inspector (CWI) certification preferred
• ASNT Level II certification in ASME B31 piping preferred
• Advanced proficiency in Microsoft Excel and Microsoft Office Suite

Skills & Competencies

• Strong leadership and quality management capabilities
• Advanced knowledge of fabrication quality standards and inspection procedures
• Strong analytical and problem-solving skills
• Excellent communication and documentation abilities
• Ability to collaborate across engineering, fabrication, and project teams
• High attention to detail and commitment to quality standards

Work Environment

This position operates primarily within a fabrication shop and office environment and may include exposure to industrial work settings, including equipment, welding operations, and fabrication processes.

Why Work with Wheeler Staffing Partners

Wheeler Staffing Partners connects skilled professionals with leading organizations across the United States. Our team is dedicated to helping candidates find opportunities that align with their expertise, career goals, and long-term professional growth while providing personalized support throughout the hiring process.

ROTHA Contracting Company, Inc. is seeking a Quality Control Manager/Construction Inspector to support roadway, bridge, and heavy civil construction projects for State and public agencies. The Quality Control Manager is responsible for developing, implementing, and maintaining project-specific Quality Control Programs to ensure construction activities are executed in accordance with contract documents, DOT specifications, permits, and regulatory requirements.

Key Responsibilities

• Develop, implement, and maintain a project-specific Quality Control (QC) Program
• Conduct and oversee field inspections from an onsite field office to verify work complies with plans, specifications, and contract documents
• Monitor materials testing and ensure proper Quality Assurance / Quality Control documentation
• Identify and document field conditions that may impact quality, schedule, or compliance
• Ensure work meets DOT, environmental, permit, and company quality standards
• Perform periodic reviews of QC processes to verify adherence to project and company standards
• Provide guidance and direction to project teams and field staff regarding quality control requirements and procedures
• Support continuous improvement of quality control practices within assigned projects through process refinement.
• Prepare and submit daily and monthly Quality Control reports
• Maintain accurate QC records including inspections, testing, certifications, and non-conformance reports
• Track corrective actions and preventive measures
• Organize and maintain QC documentation for audits and project closeout
• Coordinate with Project Managers, Superintendents, and engineers to resolve quality issues; coordinate with certified testing laboratories and additional QC personnel as required
• Support project teams with interpretation of quality-related contract requirements and inspection criteria

Required Qualifications

• Bachelor’s degree in Civil Engineering or Construction Management, or related field preferred. Relevant work experience in heavy civil/infrastructure construction will be considered
• Minimum 8 years of experience in a combination of: field inspection, heavy civil construction or construction management, and/or quality control or quality assurance roles
• Prior experience on DOT or public infrastructure projects
• Strong ability to read and interpret construction drawings, specifications, and contract documents

Physical Requirements

• Ability to work in an active outdoor construction environment in various weather conditions
• Ability to walk construction sites regularly and access all areas of active construction

Certifications / Licenses

NETTCP Quality Assurance Technologist certification preferred; willingness to obtain NETTCP certification if not currently held

Compensation

Based on experience and qualifications

Benefits Package

Health Insurance

401(k) eligibility with 6% company match

Company issued mobile device.

Paid time off and paid holidays

Annual bonus opportunities

Overtime opportunities

With a passion for life

Join our diverse teams of passionate people and a career that allows you to develop both personally and professionally. At Getinge we exist to make life-saving technology accessible for more people. To make a true difference for our customers - and to save more lives, we need team players, forward thinkers, and game changers.

Are you looking for an inspiring career? You just found it.

Position Summary

The Quality Control Technician II performs acceptance testing and inspection activities on in-process and finished goods to ensure products meet established requirements. This role is responsible for executing testing and inspection tasks accurately, documenting results in a timely manner, and supporting quality system compliance in a regulated manufacturing environment.

The position is onsite 5 days a week. This is a first shift position with hours from 6am-2:30pm. There may be a possibility for overtime via extended hours or weekends.

Job Responsibilities and Essential Duties

• 
  
• Perform functional acceptance testing, destructive, non-desand inspections on products assembled on the manufacturing floorin accordance withapproved procedures and test methods.
  

• 
  
• Perform destructive and non-destructive testing on in-process and finished goods (e.g., Visual Inspection, Seal Width, Length, Water Entry Pressure, Instron Testing, Radial Burst, Borescope, Spectrophotometry).
  

• 
  
• Conductindependentreview of Shop Floor Paperwork (SFP) to verify completeness and accuracy prior to product release or further processing.
  

• 
  
• Identifyand subject non-conforming materials to the NCMR processin accordance withestablished quality procedures.
  

• 
  
• Ensure all testing is performed according to established procedures, protocols, quality standards, and regulatory requirements.
  

• 
  
• Read,comprehend, and follow job instructions, procedures, protocols, and work-related documents, including verbal and written directions.
  

• 
  
• Train Inspectors on acceptance testing methods, applicable procedures, and newly implemented policies, as assigned.
  

• 
  
• Assess daily priorities and adjustownwork schedule as needed to support operational requirements.
  

• 
  
• Performadditionalduties as assigned; responsibilities listed are not exhaustive.
  

Minimum Requirements

• 
  
• High school diploma or equivalent required;Associate orBachelor'sdegree in science, Math, Business, ora relatedfield preferred.
  

• 
  
• Minimum of 2 yearsof experience in a quality function or regulated environment, or a bachelor's degree or Certified Quality Technician (CQT) certification.
  

• 
  
• Experience in an FDA-regulated environment preferred; medical device experience strongly preferred.
  

Required Knowledge, Skills and Abilities

• 
  
• Ability to perform functional testing, inspections, and basic measurements accurately.
  

• 
  
• Prior Instron testing experience or prior training in one of the following Instron operator courses-Series IX, Merlin, or Blue Hill-is preferred.
  

• 
  
• Competence in reviewing documentation for completeness and compliance.
  

• 
  
• Ability to perform basic math across multiple units of measure.
  

• 
  
• Ability to use electronic quality systems and databases (e.g., SAP) for data entry and record maintenance.
  

• 
  
• Strong attention to detail and commitment to data integrity.
  

• 
  
• Effective verbal and written communication skills.
  

• 
  
• Ability to work collaboratively in a team environment.
  

• 
  
• Demonstrated flexibility and willingness to learn new tasks and procedures.
  

• 
  
• Ability to work independently, manage multiple priorities, and adapt to changing workflows.
  
• Proficiencywith Microsoft Office Products or equivalent software applications.
  

Internal and External Contacts/Relationships

• 
  
• Works cross-functionally with internal teams and external stakeholders, as required, to support quality activities.
  

Environmental/Safety/Physical Work Conditions

• 
  
• Ability tolift upto 40 pounds occasionally and handle materials, test fixtures, and equipment.
  

• 
  
• Ensures environmental consciousness and safe practices areexhibitedin decisions
  

• 
  
• Use of computer and telephone equipment and other related office accessories/devices to complete assignments
  

• 
  
• May work extended hours during peak business cycles
  

• 
  
• Must be able to perform repetitive motions, including frequent use of hands, wrists, and fingers for sample preparation, testing, and instrument operation.
  

• 
  
• Must be able to remain in a stationary or standing position for extended periods during testing.
  

• 
  
• Close visual acuity required for sample preparation, reading measurements, and data verification.
  
• Must follow all safety and environmental requirements of the QC laboratory environment
  

The base salary for this position is a minimum of $27/hour and a maximum of $29/hour plus overtime

#LI-JF1

About us

With a firm belief that every person and community should have access to the best possible care, Getinge provides hospitals and life science institutions with products and solutions aiming to improve clinical results and optimize workflows. The offering includes products and solutions for intensive care, cardiovascular procedures, operating rooms, sterile reprocessing and life science. Getinge employs over 12,000 people worldwide and the products are sold in more than 135 countries.

Benefits at Getinge:

At Getinge, we offer a comprehensive benefits package, which includes:

• 
  
• Health, Dental, and Vision insurance benefits
  
• 401k plan with company match
  
• Paid Time Off
  
• Wellness initiative & Health Assistance Resources
  
• Life Insurance
  
• Short and Long Term Disability Benefits
  
• Health and Dependent Care Flexible Spending Accounts
  
• Commuter Benefits
  
• Parental and Caregiver Leave
  
• Tuition Reimbursement
  

Getinge is an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, pregnancy, genetic information, national origin, disability, protected veteran status or any other characteristic protected by law.Reasonable accommodations are available upon request for candidates taking part in all aspects of the selection process.

Rite-Hite is the global leader in the manufacture and distribution of industrial loading dock and door equipment. Our innovative products and world class sales organization ensure solid, consistent growth, both for our company and our staff. We are always looking ahead to develop innovative new products and services to improve our customers' safety, security, and productivity.

Rite-Hite provides competitive compensation and a comprehensive benefits package with medical, dental, and vision coverage along with life and paid medical leave. We also provide a retirement savings plan that combines 401(K) with company match and profit sharing. Paid holidays, vacation, and up to five paid personal/sick days per year round out the package.

Rite-Hite is an Equal Opportunity/Affirmative Action employer offering a drug free workplace for our customers and employees.

PURPOSE AND SCOPE

This position will ensure timely parts shipments of Aftermarket Products

ESSENTIAL DUTIES AND RESPONSIBILITIES

To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.

• Process Aftermarket orders to meet production shipping needs.

• Re-stock incoming parts and process material transfers.

• Assist in the maintenance of parts inventory control.

• Maintain all shipping materials (i.e. cardboard, tape, etc.)

• Maintain high quality of parts shipped by performing a visual quality assurance check.

• Maintenance of high-quality parts shipments.

• Timely processing and shipment of Aftermarket orders.

• Maintenance of sufficient shipping materials.

• Identify and select merchandise from stock and prepare items for shipment.

• Must read and understand pick slips to ensure accurate maintenance of parts inventory.

• Inspect products for correct size, quantity, and color before shipping.

• Determine size, box type, and format for shipping to prevent damage to product.

EDUCATION and/or EXPERIENCE

• High school diploma or general education degree (GED); or one to three months related experience and/or training; or equivalent combination of education and experience.

• Must have basic computer skills experience.

KNOWLEDGE / SKILL REQUIREMENTS:

Forklift license is required.

PHYSICAL DEMANDS
While performing the duties of this job, the employee is regularly required to stand; use hands to finger, handle or feel; talk or hear. The employee frequently is required to walk and reach with hands and arms. The employee is occasionally required to stoop, kneel, crouch, or crawl. The employee must occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, color vision, peripheral vision, depth perception, and ability to adjust focus.

WORK ENVIRONMENT
While performing the duties of this job, the employee is regularly exposed to fumes or airborne particles. The employee is occasionally exposed to toxic or caustic chemicals and outside weather conditions. The noise level in the work environment is usually loud.Personal Protective Equipment (PPE) is required.

Additional Job Information: