Massmutual Interview Process For Experienced Jobs in Usa

Key Responsibilities:• Operate a fully automated side loading truck, ancillary equipment and hydraulic system while driving alone on public roadway to collect solid waste on specified collection route.• Complete pre-trip and post-trip inspections and reports, daily truck report, route sheets and other documentation requested by supervisor daily.• Communicate vehicle mechanical problems to mechanic and supervisor immediately.• Maintain route quality standards as predetermined by management.• Follow all safety and equipment checks and precautions in performance of all duties.

Comply with all federal, state/provincial, local and company rules on safety and vehicle operation.• Maintain clean vehicle by cleaning cab interior and exterior of vehicle.• Comply with all information requests from superiors in order to ensure compliance with work rules and company policy.• Conform in all respects with applicable federal, state/provincial and local laws, regulations, ordinances and other orders and to all company policies, procedures and directives from supervisors.• Maintain accurate records of services performed.• Work independently with minimal in field supervision.• Work closely with supervisor to improve routing efficiencies.• May be required to work overtime.• Attend safety and branch meetings.• Perform other duties and responsibilities as required or requested by management.Requirements:• High school diploma or general education degree (GED) desired.• Possess valid Commercial Driver's License (CDL).• Minimum two (2) years of commercial driving experience OR CDL school certificate• Must be able to meet relevant criteria for safety sensitive functions according to Company standards• Must be able to demonstrate the ability to safely drive the truck and operate the equipmentKnowledge, Skills and Abilities:• Knowledge of the truck and its components and the basic maintenance Requirements: for safe operation• Ability to control operations of equipment; maneuvering truck into and out of minimum clearance spaces, using mirrors to back distances of approximately 120 feet or more• Ability to recognize unacceptable waste (such as gasoline or other flammable materials)• Ability to communicate effectively with internal and external customers• Ability to read, write, and comprehend associated documents and maps• Ability to understand and follow oral and written instructions• Flexibility to accept and adapt to change as well as the commitment to seek continuous improvement• Ability to exert muscle force to lift, push, pull or carry objects up to 50 pounds repetitively using proper lifting techniques• Ability to coordinate two or more limbs (for example: two arms, two legs, or one leg and one arm) while sitting or standing• Ability to follow all company safety policies and proceduresPhysical/Mental Demands:• Ability to stand, walk, use hands and fingers, reach, stoop, kneel, crouch, crawl, talk, hear, climb, balance, taste, and smell.• Visual Requirements: include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus due to the constant maneuvering of vehicle in tight and high traffic areas.• Ability to operate all controls from inside the vehicle.• Ability to regularly lift/move up to 10 pounds, frequently lift/move up to 25 pounds, and occasionally lift/move up to 100 pounds.• Sitting is required 75% of the time due to the primary function of driving.• Ability to work in usually loud conditions.Working Conditions:• Frequently exposed to loud noise, humidity, hot and cold weather conditions, moving mechanical parts, vibration, toxic and caustic chemicals, fumes and airborne particles.• Occasionally work in high precarious places.• Work in motor vehicle traffic conditions constantly.• Work environment is usually loud.

Key Responsibilities:• Operate a residential / recycling collection, side-load and/or rear-load truck, ancillary equipment and hydraulic system to collect solid waste and/or recyclables on specified collection route.• Load solid waste, yard waste and/or recyclables into the rear or side of waste collection vehicle.• Operate equipment on truck to compact trash into vehicle.• Operate truck and equipment using prescribed techniques to eliminate driver-induced mechanical failures.• Complete pre-trip and post-trip safety lane inspections and reports, daily truck report, route sheets and other documentation requested by supervisor daily.• Communicate vehicle mechanical problems to mechanic and supervisor immediately.• Maintain route quality standards as predetermined by management.• Follow all safety standards and equipment checks and precautions in performance of all duties.

Comply with all federal, state/provincial, local and company rules on safety and vehicle operation.• Maintain clean vehicle by cleaning cab interior and exterior of vehicle.• Identify, and tag prohibited waste items and remove the items from the waste cart or can.• Manage assigned Helper(s) if applicable.• Conform in all respects with applicable federal, state/provincial and local laws, regulations, ordinances and other orders and to all company policies, procedures and directives from supervisors.• Ensure that all required personal protective equipment be worn at all times (i.e., gloves, reflective vest, safety glasses, work boots, etc.)• Report all accidents or incidents to supervisor(s) immediately• Exhibit a professional demeanor, manner and appearance at all times (i.e., meeting customers and/or the general public while on route or in uniform.)• Maintain accurate records of services performed.• Maintain inventory of all container and residential carts and spare parts available and recommend purchase of additional containers, carts and spare parts to supervisor.• Work closely with supervisor to improve routing efficiencies.• May be required to work overtime• Attend safety and branch meetings.• Perform other duties and responsibilities as required or requested by management.Requirements:• High school diploma or general education degree (GED) desired.• Must possess a Commerical Driver's License• Minimum one (1) years of commercial driving experience OR CDL school certificate• Must be able to meet relevant criteria for safety sensitive functions according to Company standards• Must be able to demonstrate the ability to safely drive the truck and operate the equipmentKnowledge, Skills and Abilities:• Knowledge of the truck and its components and the basic maintenance Requirements: for safe operation• Ability to control operations of equipment; maneuvering truck into and out of minimum clearance spaces, using mirrors to back distances of approximately 120 feet or more• Ability to recognize unacceptable waste (such as gasoline or other flammable materials)• Ability to communicate effectively with internal and external customers• Ability to read, write, and comprehend associated documents and maps• Ability to understand and follow oral and written instructions• Flexibility to accept and adapt to change as well as the commitment to seek continuous improvement• Ability to exert muscle force to lift, push, pull or carry objects up to 50 pounds repetitively using proper lifting techniques• Ability to coordinate two or more limbs (for example: two arms, two legs, or one leg and one arm) while sitting or standing• Ability to follow all company safety policies and proceduresPhysical/Mental Demands:• Ability to stand, walk, use hands and fingers, reach, stoop, kneel, crouch, crawl, talk, hear, climb, balance, and smell.• Visual Requirements: include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus due to the constant maneuvering of vehicle in tight and high traffic areas.• Ability to regularly lift/move up to 10 pounds, frequently lift/move up to 25 pounds, and occasionally lift/move up to 100 pounds.• Sitting may be required up to 75% of the time due to the primary function of driving.• Ability to work in usually loud conditions.Working Conditions:• Frequently exposed to loud noise, humidity, rainy/stormy, extreme hot and cold weather conditions (depending on season), moving mechanical parts, vibration, toxic and caustic chemicals, fumes and airborne particles• Work in outdoor environment up to 100% of the time.• Works route away from branch location on a continuous basis throughout the day.• Occasionally work in high precarious places.• Work in motor vehicle traffic conditions constantly.• Work environment is usually loud.

Nuclear Medicine Technologist Virtual Interview Day

When: Thursday, April 2nd, 9am to 5pm

This is an invite-only event.

For consideration, please apply to this posting.

St. Francis Hospital & Heart Center in Roslyn is currently looking for a Full-Time Nuclear Medicine Technologist to join our team on the Day shift. ($10,000 Sign On Bonus available for Full-Time New Hires for St. Francis Hospital).

Additionally, St. Francis is looking for Part Time & Per Diem Nuclear Medicine Technologists to support their South Bay Cardiology Physician Practice team in West Islip on the Day shift.

New graduates welcome!

Our Benefits Include:

• Medical Coverage
• Prescription Drug Coverage
• Tuition Assistance
• Generous Paid Time Off Plan
• Comprehensive Insurance
• Company-Provided Life Insurance
• 403(b) Retirement Savings Plan

Responsibilities:

• The Nuclear Medical Technologist is responsible for performing duties directly involving a variety of technical procedures in the application of radionuclides for diagnostic and treatment of disease.
• Obtains quality diagnostic images at a technical level.

Qualifications:

• License & Registered with NYS Department of Health
• CAT Scan Certification
• Nuclear Medicine Technologist Certification Board or ARRT (Nuclear Medicine) certification required.
• Bachelor's Degree
• Must be a graduate of accredited Nuclear Medicine Technologist program.

*If you are unable to interview on April 2nd, we encourage you to apply to this posting to be considered for future opportunities.

At Catholic Health Services your well-being comes first, with comprehensive compensation and benefits; our offerings go beyond the basics. In addition to multiple medical plans, life insurance, generous paid time off and flexible spending accounts, we also offer substantial tuition reimbursement, an employer funded pension plan and several savings plan options for your future.

U.S. Customs and Border Protection (CBP) offers those interested in a career in law enforcement an exceptional opportunity to work with an elite team of highly trained professionals whose camaraderie, pride, and purpose are hallmarks of their daily mission of protecting America. You will be part of the Department of Homeland Security workforce, protecting American interests and securing our nation.

If you are looking for a rewarding career with great pay, benefits, and job stability, now is the time to make your move.

DON’T FORGET TO CHECK OUT THE INCENTIVES – SEE SALARY SECTION BELOW

As a Customs and Border Protection Officer (CBPO), you will be part of our 60,000+ workforce that strives to protect the American people by safeguarding our borders, deterring illicit activity, and enhancing the nation’s economic prosperity. Being a CBPO makes you a valuable member of the Federal Law Enforcement Officer (LEO) profession.

Typical assignments include:

• 
  
• Enforcing customs, immigration, and agriculture laws and regulations.
  
• Facilitating the flow of legitimate trade and travel.
  
• Conducting inspections of individuals and conveyances.
  
• Determining the admissibility of individuals for entry into the United States; and
  
• Preventing the illegal entry of individuals and prohibited goods and the smuggling of illegal drugs and other contraband.
  

You will be asked to provide your preference for one of the following mission-critical locations:

The preference locations listed above are expected to have vacancies available in the future, however, if the duty locations do not have vacancies at the time of your final offer, you may be offered a duty location in another geographic location within the United States. Locations offered are based on operational and mission requirements and critical agency hiring needs for entry-level CBPOs as determined by the CBP Office of Field Operations (OFO).

**Recruitment Incentive** Newly appointed Customs and Border Protection Officers (as defined in 5 CFR 575.102) will be offered up to a $15,000 incentive per year, for a three-year service contract, in the following locations:

Arizona: Douglas, Lukeville, Nogales, San Luis

California: Calexico

Hawaii: Honolulu

Maine: Calais, Eastport, Houlton, Jackman, Madawaska, Van Buren, Vanceboro

Michigan: Detroit, Port Huron, Sault Sainte Marie

Minnesota: Grand Portage, International Falls

Montana: Raymond, Sweetgrass

New York: Alexandria Bay, Champlain, Massena, Trout River

North Dakota: Dunseith, Portal

Vermont: Beecher Falls, Derby Line, Highgate Springs, Norton, Richford

Washington: Blaine, Oroville

**Recruitment Incentive** Newly appointed Customs and Border Protection Officers (as defined in 5 CFR 575.102) will be offered up to a $15,000 incentive per year, for a four-year service contract, in the following locations:

California: Otay Mesa, San Francisco, San Ysidro, Tecate

Florida: Key West

North Dakota: Pembina

Annual Base Salary for newly appointed CBPOs varies as follows:

Locality pay varies by duty location.

Note: A fully trained CBPO is eligible for up to $45,000 in overtime pay in addition to the starting salary.

Grade level eligibility and salaries vary depending upon background, including experience and education, and duty location of the opportunity. This is a career ladder position with a grade level progression of GS-5, GS-7, GS-9, GS-11, and GS-12. You will be eligible for a promotion to the next higher grade level (without re-applying) once you successfully complete 52 weeks in each grade level. Promotions are at the discretion of the agency.

Officers are eligible to select from an array of federal employment benefits that include health, dental and other insurance plans, a generous annual and sick leave program, and participation in the Thrift Savings Plan, a retirement plan akin to a traditional and ROTH 401(k) offering.

You qualify for the GS-9 grade level in one of the following ways: experience, education, or a combination of both.

Experience: A minimum of one (1) year of specialized experience equivalent to at least the next lower grade level that includes:

• 
  
• Detaining suspected violators of federal, state, or local laws and/or arresting violators using the proper law enforcement methods.
  
• Enforcing the laws and regulations relating to importing, exporting, and/or international shipping to and from the United States.
  
• Utilizing intelligence techniques and behavior analysis to identify potential threats and perform risk assessments for violations of laws and threats to national security.
  
• Conducting interviews in a law enforcement capacity for the purposes of gaining information from suspected violators of laws to determine the appropriate course of action.
  

The above experience will be applied in connection with the following: Ability to make rapid, accurate judgments and decisions with respect to the application of the regulations, instructions, and procedures for importing and exporting merchandise to and from the United States; or enforcement and administration of laws relating to the right of persons to enter, reside in or depart from the United States, Guam, Puerto Rico, and the U.S. Virgin Islands.

Education Substitution: A master's (or higher) degree, or two or more years of progressively higher-level graduate education leading to such a degree, or an LL.B. or J.D. from an accredited college or university; OR

Combination of Experience and Education: A combination of specialized experience AND successfully completed graduate-level education. This will be calculated using your resume and official or unofficial transcripts submitted with your application.

Citizenship: You must be a U.S. Citizen to apply for this position.

Residency: You must have had primary U.S. residency (includes protectorates as declared under international law) for at least three (3) of the last five (5) years.

Age Restriction: In accordance with Public Law 100-238, this position is covered under law enforcement retirement provisions. Candidates must be referred for selection to the Customs and Border Protection Officer position before reaching their 40th birthday in accordance with Department of Homeland Security Directive 251-03. The age restriction may not apply if you are currently serving or have previously served in a federal civilian law enforcement (non-military) position covered by Title 5 U.S.C. 8336(c) or Title 5 U.S.C. 8412(d).

Veterans’ Preference: You may also be eligible for an excepted service Veterans Recruitment Appointment (VRA). The age restriction does not apply if you are Veterans' Preference eligible.

Formal Training: You will be required to complete a paid pre-academy orientation for approximately two (2) weeks at your home port. You will then attend a 101-day training program – CBP Field Operations Academy – conducted at the Federal Law Enforcement Training Center (FLETC) located in Glynco, GA. This training consists of basic law enforcement skills, immigration laws, firearms training, examination of cargo/bags/merchandise, physical fitness, etc. Candidates assigned to the southern border, Miami, or Puerto Rico duty locations must attend and pass an online Spanish training program, which will be completed at their home port. Successful completion of the Academy is required for this position.

Click the Apply button on this site. You will be linked to the CBP Talent Network page. For Position of Interest, select Customs and Border Protection Officer.

You’ll then receive a link(s) to the CBPO JOA(s) on USAJOBS to complete your application. Be certain to review ALL details of the job opportunity announcement and follow all instructions in the application process, including items (resume, transcripts, etc.) to submit. You will be evaluated based on your resume, supporting documents, and the CBPO Entrance Exam.

As a subscriber to the CBP Talent Network, you’ll receive monthly emails with information about webinars, career expos, and future opportunities with OFO and CBP.

Pay: LG TBD Subject to Collective Bargaining.

Benefits

WEG offers competitive compensation, exciting career growth opportunities, and excellent benefits, including:

• Paid Vacation & Holidays
• Excellent Medical, Dental and Vision coverage
• 401(k) with company match
• Tuition reimbursement
• Company paid Life and Disability insurance
• Employee Assistance Program (EAP)
• Bonus plan (prorated)

Company Overview

WEG: Our Company: Founded in 1961, WEG is one of the largest electric machine manufacturers in the world. We employ over 49,000 people globally and offer a diversified and integrated product line, with sales in more than 135 countries. Our U.S. operations are expanding rapidly, and were looking for dedicated individuals to help us achieve our ambitious growth plans.

Our Culture: We value each individual's contribution to our success and motivate our team through integrity, ethics, and continuous support for personal development. We prioritize professional and personal growth opportunities, human rights, diversity, and environmental sustainability. We invest in solutions to reduce carbon emissions and encourage our employees to engage in social activities focused on health and education.

At WEG, our values are: Human Company, Teamwork, Efficiency, Flexibility, Innovation, and Leadership.

Sustainability: We are committed to driving efficiency and sustainability. Our sustainability strategy is based on four pillars:

• Sustainable Products and Solutions: We provide products and services with the highest efficiency and lowest carbon footprint, supporting our customers' decarbonization journeys.
• Responsible Supply Chain: We engage a supply chain that upholds ethics in human rights, labor relations, and environmental preservation.
• Circular and Efficient Operations: We optimize eco-efficiency in natural resource management, reduce emissions and waste, and promote recycling and reuse.
• Engaged Employees and Communities: We ensure safe working conditions, promote well-being, and foster an inclusive, innovative, and high-performance environment.

Role: Tank Prep / Process Operator

You may see yourself in this role, if you are an experienced production operator who has mechanical aptitude, a strong work ethic, and are looking for a serious career opportunity.

You will perform a range of tasks in the production of a transformer, including:

• Reading and understanding Bills of Materials (BOMs), instructions and drawings.
• Inspection of tank and cover for defects
• Complete quality check of welded areas to meet manufacturing procedures and rework/repaint if required.
• Clean out all threads on tank and cover with tap/die and vacuum debris.
• Rotate cover and install and wire Current Transformers (CTs) per engineering design.
• Cut and install floor insulation and hardware before tanking.
• Cut insulation and install shunts on tank walls prior to tanking.
• Prep and install radiators after welding of cover.
• Move transformer and parts to and from weld booth as required.
• Assist in Final Assembly as needed.

No 3rd Parties, please.

are an Equal Opportunity Employer.

Basic:

• Ability to work within the WEG Code of Ethics & Values. (WEG Code of Ethics, 4th Edition)
• Able to work over-time as needed.
• Resides or plans to reside within reasonable commuting distance--no relocation assistance available for this role.
• Has current work authorization for employment in the United States.
• Must complete: talent assessment, Job interview, pre-employment drug screen and background check.
• Safety Sensitive position: Drug panel includes THC.

Preferred:

• High School Diploma or Equivalent.
• Two years prior manufacturing experience.
• ACT WorkKeys National Career Readiness Certification (NCRC): Platinum or Gold Level.

Compensation details: 23.46-24.9 Hourly Wage

PI198c69b59165-26289-39993808

Allied Universal, North America's leading security and facility services company, offers rewarding careers that provide you a sense of purpose. While working in a dynamic, welcoming, and collaborative workplace, you will be part of a team that contributes to a culture that positively impacts the communities and customers we serve. We offer comprehensive benefits for most full-time positions, including medical, dental, and vision coverage, life insurance, a retirement plan, employee assistance programs, company discounts, perks, and more.

As a Hospital Security Officer, you will serve and safeguard a high profile healthcare customer. The Hospital Security Officer is responsible for the surveillance of the client's healthcare premises and the protection of the staff, members, and visitors. A Hospital Security Professional detects and prevents any suspicious activity, observe and reports incidents, and provides customer service in a friendly and professional manner.

$20 / hr

Flex: Days and shifts will be discussed during interview

We are inviting YOU to attend walk-in interviews for Hospital Security Officer positions

When: Tuesday, July 1st, and Wednesday, July 2nd from 11am - 1pm

Where: 3300 Gallows Roads, Falls Church VA 22042

Must be proficient in speaking, reading, and writing in English

Must have at least 1+ year of professional work experience in the United States

Responsibilities:

• Observe and remain vigilant for signs of crime, disorder, hazard, and unusual activity
• Patrol on foot, bicycle, or via a vehicle to check for unsafe conditions, blocked entryways, security violations, mechanical problems, and unauthorized individuals
• Orally and physically de-escalating individuals, as needed
• Inspect all security devices and fire control equipment
• Screen members, visitors, and client employees to expedite their admittance to the facility
• Respond to incidents of fire, medical emergency, bomb threat, flooding, water discharge, elevator emergency, hazardous materials, or inclement weather with calm urgency
• May also include patient escort, patient watch, provide safety escort, assist and/or transport deceased to morgue

Minimum Requirements:

• Prior work experience involving dealing with customers, troubleshooting, and/or managing stressful situations
• Be at least 18 years of age for unarmed roles; 21+ years of age for armed roles
• Possess a high school diploma or equivalent, or 5 years of verifiable experience
• As a condition of employment, applicants will be subject to a background investigation in accordance with all federal, state, and local laws. Allied Universal will consider qualified applications with criminal histories in a manner consistent with applicable laws.
• As a condition of employment, applicants will be subject to a drug screen to the extent permitted by law.
• Licensing requirements are subject to state and/or local laws and regulations and may be required prior to employment. A valid driver's license will be required for driving positions only
• Post offer, must be able to successfully complete the training requirement and obtain a Management of Aggressive Behavior certification

Perks and Benefits:

• Health insurance and 401k plans for full-time positions
• Schedules that fit with your personal life goals
• Ongoing paid training programs and career growth opportunities
• Employee discounts through our perks program to your favorite restaurants, entertainment venues and much more

Allied Universal is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race/ethnicity, age, color, religion, sex, sexual orientation, gender identity, national origin, genetic information, disability, protected veteran status or relationship/association with a protected veteran, or any other basis or characteristic protected by law. For more information: you have any questions regarding Equal Employment Opportunity, have difficulty using the online system and require an alternate method to apply, or require an accommodation at any time during the recruitment and/or employment process, please contact our local Human Resources department. To find an office near you, please visit:

THIS IS AN IMMEDIATE NEED.

Swing Shift 100% On-site in San Francisco - Free Employee Parking

Manufacturing Technician

Location: Mission District (100% Onsite)

Schedule: Swing Shift - 3pm - 11pm

Compensation: $35/hour

Duration: 6-Month Contract (Potential for Extensions)

We are seeking an experienced Manufacturing Technician to join our team onsite in San Francisco’s Mission District. This is a hands-on, day-shift role supporting both engineering and production activities in a high-precision manufacturing environment.

Key Responsibilities

• Perform precision soldering, including work with small components
• Follow all safety procedures, including laser safety requirements
• Construct, test, and calibrate engineering and production robotic/computer-controlled assembly systems
• Interpret engineering prints, schematics, and assembly instructions
• Utilize high-precision measuring equipment and maintain detailed calibration records
• Support root cause analysis of manufacturing, quality, and yield issues

Required Skills & Experience

• Minimum 5 years of industry experience
• Strong soldering background, particularly with small components
• Experience with mechanical hand and power tools
• Proficient with oscilloscopes, DMMs, signal generators, optics, and cameras
• Experience working with lasers, laser safety, beam focus, pattern recognition, and active alignment
• Experience with UV adhesive auto-dispense and curing processes
• Experience with multi-axis, vision-assisted, computer-controlled robotic assembly equipment in both R&D and volume manufacturing environments
• Knowledge of pneumatic actuated slides, grippers, and hexapod tables
• Experience identifying root cause of manufacturing, quality, and yield issues
• Proficiency with Microsoft Office, SPC tools, and flowcharting software
• Strong written and verbal communication skills in English

Physical Requirements

• Ability to stand for extended periods
• Ability to lift and carry up to 35 lbs

This is an excellent opportunity for a skilled technician looking for a 6-month contract role with strong potential for extension in a dynamic manufacturing environment.

About Shaw Bakers

At Shaw Bakers, we love mixing renowned French technics with state-of-the-art process innovation to bring delicious baked goods to our local community through our legendary local Cafes, as well as national retail partners across North America. We are an aggressive, fast-growing company with a full pipeline of exciting new projects, products, and employment opportunities.

Production Supervisor

The Production Supervisor role contributes to Shaw Baker’s success by providing ongoing support in scheduling resources, technical leadership, and facilitating production flow to meet customer requirements. The Production Supervisor establishes priorities, monitors progress, revises schedule, solves day to day issues, and provides coaching, counseling, and training to employees. The Production Supervisor also enforces systems, policies, and procedures and completes various production reports.

This role ensures the production workflow with high safety and quality standards, working with their team to avoid waste and maintain cost control, while operating in accordance with the company’s values and guiding principles.

This role is onsite in our South San Francisco facility. We are currently interviewing for all shifts!

Summary of Key Responsibilities

Responsibilities and essential job functions include but are not limited to the following:

• Maintains a safe environment for the employees and ensures strict adherence to company Health and Safety standards, including PPE Policy.
• Support safety drills following the responsibilities of the position.
• Provides leadership and direction to the team, leading by example.
• Participates in the selection process for new employees, including hiring, training, performance evaluations, corrective action, and work schedules.
• Works with other supervisors and cross-functional department leads to assess employee developmental needs.
• Effectively solves employee issues using a facilitative approach by conducting proper research, investigation, analysis, and evaluation to solve problems.
• Works with Production Managers to implement changes on the operations team.
• Oversees hourly employees’ payroll and ensures that time and attendance for assigned employees are accurate in Paylocity.
• Establishes daily, weekly, and monthly objectives with the production manager and additional Production Supervisors, effectively communicating them to employees, driving results,
• Manages availability of equipment, human and material resources required to meet production targets and efficiencies.
• Maintains the Quality of the product by implementing and enforcing quality control and tracking programs (SPC) to meet quality objectives.
• Effectively works cross-functionally across all departments.
• Ensures equipment operation by calling for repairs and following up on equipment status until back to operation through the work order process.
• Contributes to projects of cost reductions, developing and reporting results.
• Provides information by gathering production performance records and data to prepare reports on performance and progress, presenting to leadership when needed.
• Reviews and maintains daily reporting (batch/production/packaging reports).
• Informs leadership of all requirements tools, supplies, or any resources to accomplish production objectives.
• Understands and can communicate about blueprints, diagrams, schedules, and miscellaneous documents.
• Trains new employees on the use of our machinery safely.
• Leads 5S activities.
• Supports continuous improvement process.
• Supports requests from other departments (NPD, Maintenance.)
• Maintains and covers schedules as needed.
• Additional availability outside of assigned working hours during rare and critical circumstances.
• Committed to following and adhering to GMP and Food Safety practices to comply with SQF and regulatory requirements.

Required Experience

• 5 years of team leadership experience in the manufacturing and production environment
• Food manufacturing experience required
• Development of policies and programs in a fast-paced environment
• Experience with baking technology a plus
• Familiarity with American Institute of Baking (AIB), Good Manufacturing Practices (GMP), and Hazard Analysis and Critical Control Points (HACCP) standards.

Basic Qualifications

Basic Qualifications are objective, non-comparative, and relevant requirements essential to performing a role anywhere in the company. Examples include minimum educational requirements or specific degrees, certifications, minimum years of experience in a similar role with similar scope or level of responsibility, experience with core technology tools or platforms such as Microsoft Office, equivalent military experience, etc.

• High School diploma or equivalent
• Basic Computer Skills (Microsoft Office Suite)
• Bi-lingual in Spanish & English