Mark Dodge Ram Jobs in Usa

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for an Assembler Installer to join our Joint and Installation team in Everett and Renton, Washington.

As an Assembler Installer, you will play a vital role in our commitment to excellence in aviation by ensuring the safety and quality of our aircraft. Your expertise will be essential as you meticulously verify parts and fasteners against stringent specifications, set up assembly tools, and align components based on engineering drawings and installation plans. In this dynamic environment, you will engage in the installation and rework of various interior parts and assemblies, enhancing both functionality and aesthetics. Your dedication to quality will shine through as you conduct thorough inspections of your work, ensuring compliance with our high standards and promptly addressing any discrepancies.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation

Position Responsibilities

• Review job assignments using bar charts, SOI, IP, and consult with leads to obtain necessary drawings.

• Locate work areas using drawings and electronic resources that specify airplane and section numbers.

• Verify kitted parts against installation plans and bill of materials for accuracy and suitability.

• Determine and obtain the correct fasteners from PCA/MMO control per specifications.

• Set up assembly tools according to tooling instructions, ensuring locators are correct for the model.

• Align and secure parts on the airplane using tooling holes and clamps, checking for proper margins.

• Install and rework interior parts and assemblies, including carpets, stowbins, and seats.

• Select and use appropriate drill bits, reamers, and countersinking tools for pilot and full-size holes.

• Drill, ream, and countersink holes in parts/assemblies per specifications and instructions.

• Disassemble parts, deburr holes, and prepare surfaces for fastener installation.

• Apply sealants, primers, adhesives, and corrosion-inhibiting compounds as required by specifications.

• Install fasteners in the correct sequence using appropriate tools, adhering to specifications.

• Mark and symbolize work for subsequent riveting and install cables and wire bundles as needed.

• Inspect completed work for defects, ensuring compliance with engineering drawings and report any job handicaps.

• Move kits, carts, and equipment within the work cell to facilitate workflow and maintain personal and tool certifications.

Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.

• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.

• Work in environments that may involve contact with metals, solvents, and coolants.

• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.

• Adapt to varying noise levels and atmospheric conditions.

• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee

Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.

Basic Qualifications

• 1+ years of experience in manufacturing, automotive, construction, aerospace or similar industry; this can include education and Military.

• 1+ years of experience following oral and written instructions in the form of blueprints, drawings, work instructions.

• 1+ years of experience using hand and power tools

• Ability to stand 6-8 hours per day; walk constantly; climb or work from stairs/steps/ladders; bend and twist frequently; squat and kneel.

• Ability to wear hearing protection (ear inserts, canal caps, earmuffs); eye protection.

• Ability to use hazardous chemicals.

Preferred Qualifications:

• 1+ years of experience installing aerospace components, construction or automotive assemblies with precision measurement tools, hand and power tools.

• Enrolled in a Boeing partnered manufacturing related high school or community and technology college academic program.

Typical Education & Experience:

High school graduate or GED preferred.

Relocation:

• Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.

Drug Free Workplace

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement:

• This position is for a variety of shifts

Total Rewards & Pay Transparency:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.  Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.  

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.  

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay is based upon candidate experience and qualifications, as well as market and business considerations.  

Pay: $24.32/hour, with potential to earn up to $53.30/hour in accordance with the terms of the relevant collective bargaining agreement.  

Applications for this position will be accepted until Apr. 15, 2026

Language Requirements

English Preferred

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for a Painter Spray B to join our Paint team in the Puget Sound in Washington. 

As a Painter Spray B, you will be a key player in our commitment to delivering high-quality finishes on aircraft components. Candidates must have the ability to see color accurately, as your expertise in applying various coatings, including primers and protective finishes, will ensure that every part meets stringent quality standards. You will prepare surfaces meticulously, utilizing your skills to remove corrosion and perform chemical reactivation as needed. Your attention to detail will be critical as you operate curing ovens and monitor time-sensitive materials, ensuring that all processes adhere to established specifications. Additionally, you will collaborate with team members to maintain an efficient workflow, contributing to a safe and compliant work environment. 

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.  

Position Responsibilities: 

• Spray and/or brush prime, finish prime, and protective coatings to aircraft detailed parts and assemblies in accordance with blueprints and specifications. 

• Prepare surfaces to ensure proper adhesion, including the removal of corrosion and paint stripping, as well as performing chemical reactivation of painted surfaces. 

• Perform rework and touch-up painting using spray and brush techniques per BAC specifications. 

• Prepare various paint materials, such as primers, enamels, and lacquers, according to BAC specifications. 

• Clean and service spray guns, paint tanks, brushes, hoses, and related equipment after use. 

• Mask and unmask areas as required to facilitate painting operations, following drawings and specifications. 

• Set up all equipment and supplies necessary to perform work assignments. 

• Operate curing ovens and related equipment, ensuring they function properly for the current painting process and documenting as required. 

• Monitor and maintain time-sensitive materials and processes, ensuring compliance with operational standards. 

• Review work instructions to support the division of work for incoming orders and ensure compliance with quality requirements. 

• Part mark and wrap finished parts and assemblies as required per BAC specifications. 

• Obtain and maintain necessary certifications and qualifications for the role. 

• Screen work instructions to ensure clarity and adherence to specifications. 

• Coordinate with team members to ensure efficient workflow and adherence to schedules. 

• Document equipment functionality and any adjustments made during the painting process.  

Physical Demands and Potential Hazards: 

• Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs. 

• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting. 

• Work in environments that may involve contact with metals, solvents, and coolants. 

• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards. 

• Adapt to varying noise levels and atmospheric conditions. 

• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.  

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options. 

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee 

Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered. 

Basic Qualifications:  

• Experience prepping, cleaning, and painting various surfaces in industrial, commercial, or academic settings.

• Experience using and maintaining various types of paint equipment and applicators, such as HVLP, pneumatic, electrostatic, and others.

• Experience using basic math (e.g. addition, subtraction, multiplication, division, & ratios).

• Experience handling and disposing hazardous materials per government regulations.

• Ability to walk constantly throughout the workday; stand 6-8 hours per day; bend and twist frequently up to six hours per day; squat and kneel.

• Ability to use and operate low impact vibratory tools (sander/buffer).

• Ability to wear eye, hearing, foot, hand, respirator and other personal protective equipment/safety gear at all times.

Preferred Qualifications: 

• Experience performing aircraft or autobody painting and finishing operations.

• Experience utilizing and following detailed work instructions.

Typical Education & Experience:  

High school graduate or GED preferred. 

Relocation: 

• Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense. 

Drug Free Workplace: 

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. 

Union Representation Statement:  

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement. 

Shift Work Statement:  

• This position is for a variety of shifts.  

Total Rewards & Pay Transparency: 

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.  Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.    

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.    

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.  

Pay: $23.32/hour, with potential to earn up to $47.54/hour in accordance with the terms of the relevant collective bargaining agreement.

Applications for this position will be accepted until Mar. 31, 2026

Language Requirements

English Preferred

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for an Assembler Power Plant B to become part of our Join and Installation team in Everett and Kent, Washington.

Join our dynamic team as an Assembler Power Plant B, where your skills will be pivotal in constructing and assembling critical aircraft components. In this essential role, you will utilize production drawings and specifications to accurately install, fit, and align parts for power packs and strut assemblies. Your attention to detail will ensure that each component is meticulously drilled, reamed, and riveted, while your expertise in pre-assembly will streamline the process for wiring harnesses and tubing assemblies. You will operate advanced material handling equipment to efficiently load and unload engines and struts. Your ability to verify dimensions and check for defects will be crucial in maintaining our commitment to excellence. If you are passionate about aviation and thrive in a collaborative environment, we invite you to contribute to our mission of delivering high-quality aircraft systems.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.

Position Responsibilities:

• Install, fit, fasten, align, adjust, and connect parts and assemblies to build aircraft power packs and strut assemblies.

• Use production drawings, specifications, and assembly pages to derive measurements and locate points for part marking and layout preparation.

• Perform drilling, reaming, riveting, and soldering necessary for assembly tasks.

• Review work orders and installation plans to determine job priorities and obtain appropriate drawings and production illustrations.

• Obtain and verify kitted detail parts and assemblies, ensuring they are correct and free of defects.

• Pre-assemble components such as wiring harnesses and tubing assemblies using power and hand tools.

• Operate material handling equipment, including overhead cranes and scissor lifts, to load and unload engines and struts.

• Align parts and assemblies to mating surfaces, temporarily securing them in place and checking for proper alignment.

• Attach, seal, and connect parts, assemblies, and wires using the correct fasteners and tools, tightening per specifications.

• Torque fasteners and install safety devices such as lock wires and cotter pins as required by drawings or specifications.

• Seal hydraulic fittings and access doors, applying necessary fluids, primers, and adhesives according to specifications.

• Operate various tools, including pull rivet guns and countersinks, to fasten and torque parts and assemblies.

• Verify close tolerance dimensions using precision measuring tools and check work for defects before inspection.

• Maintain personal and tool certifications, ensuring compliance with safety and operational standards.

• Communicate with team leaders and supervisors regarding job progress, issues, and assistance needed, while consulting with engineering and planning as required.

Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs. to 15-35 lbs.

• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.

• Work in environments that may involve contact with metals, solvents, and coolants.

• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.

• Adapt to varying noise levels and atmospheric conditions.

• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

To meet U.S. export control compliance requirements, a “U.S. Person” as defined by 22 C.F.R. §120.62 is required. “U.S. Person” includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee. Do you meet this requirement?

Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.

Basic Qualifications:

• 1+ years of experience working with mechanical or structures related statements of work; such as construction, aerospace, automotive, maritime or similar industry; this can include education and military.

• 1+ year experience utilizing and following detailed work instructions, reading and interpreting blueprints, drawings, and specifications.

• Ability to walk constantly throughout the workday; stand 6-8 hours per day; climb or work from stairs/steps up to 8 hours per day; climb ladders; bend and twist frequently up to six hours per day; squat and kneel.

• Ability to lift up to 35 pounds.

• This position requires you to wear eye, hearing, foot, hand, respirator and other personal protective equipment/safety gear at all times.

• Proficiency in reading, writing, and speaking English

Preferred Qualifications:

• 1+ years of experience performing aircraft structural work or equivalate.

• 1+ years of experience using high impact vibratory tools; such as bucking/riveting.

• Enrolled in a Boeing partnered manufacturing related high school or community and technology college academic program

Conflict of Interest: 

• Successful candidates for this position must successfully complete the Company’s Conflict of Interest (COI) assessment process.

Typical Education & Experience:

• High school graduate or GED preferred.

Relocation:

• Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.

Drug Free Workplace

• Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

• This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Safety Sensitive Statement:

• This is a safety-sensitive position and is subject to Department of Transportation (DOT) random drug and alcohol testing.

Shift Work Statement:

• This position is for a variety of shifts

Total Rewards & Pay Transparency:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.  Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.  

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.  

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay: $25.00/hour, with potential to earn up to $55.30/hour in accordance with the terms of the relevant collective bargaining agreement.

Applications for this position will be accepted until Sept. 04, 2026

Language Requirements

English Preferred

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for a Metal Surface Processor to join our Fabrication team in Auburn, Algona and Puyallup, Washington.

As a Metal Surface Processor, you’ll be part of a skilled team responsible for preparing metal components for aerospace applications through specialized surface treatment processes. From cleaning and masking to anodizing and coating, your work will directly support the quality and performance of parts built for flight. This role requires precision, technical ability, and a strong commitment to safety as you work with complex equipment and follow detailed procedures to ensure each component meets exact specifications.

You will play a critical role in upholding our commitment to safety and quality standards and ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and join our mission to deliver excellence in aviation.

Position Responsibilities:

• Review the tie-in book or standard operating procedures to understand daily work assignments. Provide comprehensive oral or written shift handoffs to ensure seamless workflow continuity.

• Monitor the workload in the area and coordinate task flow to optimize shop utilization. Proactively report issues or request additional support as necessary.

• Identify, separate, and prepare parts according to work orders and chemical recipes (e.g., alkaline, emulsion, paint strip, sandblast, passivate) prior to racking.

• Conduct thorough inspections of materials to verify proper cleaning, etching, rinsing, and other processes to ensure optimal adhesion and coating quality. Perform visual checks post-process to confirm uniform coverage.

• Apply approved masking materials and coatings based on technical drawings or tooling specifications in preparation for plating or painting operations.

• Determine appropriate racking methods for complex part geometries, ensuring proper contact to prevent burning. Inspect, remove, and report any damaged racks or clips.

• Rack and unrack parts while verifying correct part numbers and chemical processes as per work orders. Ensure no overloading or air pocket formation occurs during handling.

• Operate material handling systems, including cranes, hoists, and carts, safely to transport parts and materials through processing areas.

• Operate and monitor cleaning, Dow Coating, anodizing, dyeing, alodine, and rinsing tanks. Determine correct dip times and maintain appropriate temperatures and solution levels.

• Perform specific treatments such as sulfuric/chromic acid dips on 75 ST parts formed on Cerro Bend. Apply alodine touch-ups or chromadize as required.

• Assist in maintaining chemical strength by accurately measuring and adding solutions. Estimate material surface area to prevent generator overloads.

• Start generators, operate control panels, and utilize overhead cranes to load/unload tanks and transfer processed items between stations.

• Strip anodizing from racks using caustic soda and nitric acid. Clean tanks, crocks, and equipment to ensure safe and efficient operations.

• Mark, oil, wrap, and route completed parts according to drawings or work orders. Ensure correct parts are matched to work orders and transferred to Quality Assurance (QA) for inspection.

• Handle and dispose of hazardous materials (e.g., alodine, acids, solvents) in accordance with safety procedures. Complete all required on-the-job training and maintain necessary certifications.

Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.

• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.

• Work in environments that may involve contact with metals, solvents, and coolants.

• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.

• Adapt to varying noise levels and atmospheric conditions.

• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee

Current Boeing employees working in Puget Sound and Portland must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.

Basic Qualifications:

• 1+ years of experience using basic math (e.g. addition, subtraction, multiplication and division).

• 1+ years of experience or training reading and interpreting drawings or blueprints.

• 1+ years of experience working with hazardous materials.

• Must be able to lift, push and pull up to 35 pounds

Preferred Qualifications:

• Experience operating cranes.

Typical Education & Experience:

• High school graduate or GED preferred.

Relocation:

• Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement:

• This position is for a variety of shifts.

Total Rewards & Pay Transparency

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.  Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.  

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.  

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay: $24.32/hour, with potential to earn up to $53.30/hour in accordance with the terms of the relevant collective bargaining agreement.

Applications for this position will be accepted until Apr. 11, 2026

Language Requirements

English Preferred

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for a Painter Spray A -Major Assemblies to join our Joint and Installation team in Everett and Renton, Washington.

As a Painter Spray A - Major Assemblies, you will be essential in ensuring the highest standards of quality and safety in the painting process for our aircraft. Your role will involve collaborating with team members to complete painting assignments while meticulously preparing surfaces to guarantee proper adhesion and finish. You will utilize various paint materials and techniques, including both spray and brush methods, to achieve flawless results that meet inspection requirements. Your attention to detail will be critical as you clean and service equipment, mask areas for painting, and coordinate with safety and environmental teams to ensure a compliant work environment. Additionally, you will operate automated spray equipment and curing ovens, monitoring conditions to maintain optimal performance throughout the painting process.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.

Position Responsibilities:

• Collaborate with employees of varying classifications to ensure the completion of painting assignments for aircraft, missiles, or space vehicles.

• Perform touch-up and pickup painting using both spray and brush techniques, adhering to inspection requirements.

• Prepare surfaces to ensure proper adhesion, including corrosion removal and paint stripping as needed.

• Prepare various paint materials, such as primers, enamels, and lacquers, according to specifications.

• Clean and service spray guns, paint tanks, brushes, hoses, and related equipment after use.

• Mask and unmask areas to facilitate corrosion removal or painting operations.

• Set up all necessary equipment and supplies for painting operations, including fall protection and protective equipment.

• Coordinate with safety, environmental, and fire organizations to ensure the shop is prepared for painting operations.

• Operate automated spray equipment, such as robots, for preparation and painting tasks.

• Operate curing ovens and monitor related equipment to ensure compliance with specifications, including temperature and humidity.

• Monitor and maintain time-sensitive materials and processes throughout the painting operation.

• Support customer inspections as required and screen work instructions to ensure proper workflow.

• Apply decals, part markings, and wrap finished parts or assemblies as required.

• Recognize and report any discrepancies or malfunctions in equipment or processes per established procedures.

• Obtain and maintain necessary certifications and qualifications for the role, and perform established autonomous maintenance as needed.

Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.

• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.

• Work in environments that may involve contact with metals, solvents, and coolants.

• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.

• Adapt to varying noise levels and atmospheric conditions.

• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee

Resumes of current Puget Sound Boeing employees submitted via “Find Jobs” in Boeing/Workday will be considered as this job is not installed in QTTP (Quality Through Training Program).

Aerospace Technician and Mechanic Aptitude Virtual Job Tryout: To be considered for this position you will be required to complete a technical assessment as part of the selection process. Failure to complete the assessment will remove you from consideration.

Basic Qualifications:

• 1+ years of experience in prepping, cleaning, and painting various surfaces in industrial, commercial, or academic settings.

• 1+ years of experience using various types of paint equipment and applicators, such as HVLP, pneumatic, electrostatic, and others.

• 1+ years of experience mixing paints.

• 1+ years experience utilizing and following detailed work instructions, reading and interpreting blueprints, drawings, and specifications.

• 1+ years of experience handling chemicals and/or hazardous materials

• Experience working from heights & using fall protection equipment with weight limitations.

Preferred Qualifications:

• 1+ year of experience performing aircraft or autobody painting and finishing operations.

• Completed 1+ year of autobody paint/collision repair in high school or community and technology college academic program.

Typical Education & Experience:

High school graduate or GED preferred.

Relocation:

• This position offers relocation based on candidate eligibility.

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement:

• This position is for a variety of shifts

Total Rewards & Pay Transparency:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay is based upon candidate experience and qualifications, as well as market and business considerations.

Summary pay range: $25.32/hour, with potential to earn up to $54.76/hour in accordance with the terms of the relevant collective bargaining agreement.

Applications for this position will be accepted until Mar. 31, 2026

Language Requirements

English Preferred

Relocation

This position offers relocation based on candidate eligibility.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Summary

GENERAL SUMMARY:

The Clinic LPN assists physicians with examinations and procedures to serve the medical needs of patients with various health conditions in a professional, confidential, and caring manner. Coordinates the flow of patients, phone calls, lab work, and nurse visits to facilitate quality patient care and customer service goals. Provides professional nursing care as prescribed by the physician and in compliance with the Nebraska Nurse Practice Act, any applicable licensure/certification requirement and organizational policies and procedures.

PRINCIPAL JOB FUNCTIONS:

1. *Commits to the mission, vision, beliefs and consistently demonstrates our core values.

2. *Collects subjective and objective data and contributes to the assessment of the patient; documents appropriately in the patient chart.

3. *Makes accurate and timely observations and documents changes in the patients condition in the patient chart.

4. *Retrieves messages and responds to calls from patients, pharmacies, hospitals, nursing homes and other medical offices by use of telephone and computer in a timely manner as delegated by licensed heath care provider (MD, RN, PA, NP)

5. *Assists the physician or provider with all examinations and procedures.

6. *Keeps the exam rooms clean, disinfected and stocked with necessary supplies.

7. *Schedules outpatient tests and procedures at hospitals by telephone in a timely manner; adheres to the referral process of the practice.

8. *Explains tests and preparation as needed for adequate patient education.

9. *Reads and follows policies and procedure manuals for the practice.

10. Monitors inventory of supplies and communicates information to Office Manager.

11. *Administers injections, vital signs, vision and auditory testing as delegated.

12. *Distributes required vaccination materials and obtains required authorized signature from patient, parent, or guardian as needed.

13. *Completes patient chart in a thorough and timely fashion.

14. *Maintains flow of patients in accordance with time of appointment in order to avoid delays for the provider and undue waiting for patients.

15. *Responsible for compliance with OSHA and safety plans of the practice.

Essential Job functions are marked with an asterisk *

EDUCATION AND EXPERIENCE:

Graduation from an accredited professional nursing program required. Current licensure as a Licensed Practical Nurse (LPN) in the State of Nebraska required.

OTHER CREDENTIALS / CERTIFICATIONS:

Current Basic Life Support (BLS) certification required.

Summary

GENERAL SUMMARY:

Responsible for assisting the Licensed Healthcare Provider (Physician, APRN, PA) and nurses with patient care, clerical, environmental and organizational tasks. Supports remote clinic sites with order entry and chart completion in the Electronic Health Record (EHR). Collaborates with other staff to achieve quality patient care and customer service goals. Works under the direction of a Registered Nurse.

PRINCIPAL JOB FUNCTIONS:

1. *Commits to the mission, vision, beliefs and consistently demonstrates our core values.

2. *Performs nursing care and assists provider(s) with examinations and procedures to serve the medical needs of patients, as assigned.

3. *Facilitates flow of patients in accordance with appointment time to avoid delays for the provider and undue waiting for patients.

4. *Greets and rooms patients; taking vital signs, updating patient history, preparing patient for examination/procedures, as assigned.

5. *Rooms patients via EHR status indicator for outstate clinics and enters clinical documentation, orders, and results received from clinic, as assigned.

6. *Instructs patient and family about tests/procedures, normal results, medications, nutrition and other health related issues utilizing approved protocol or written instruction, as assigned.

7. *Assists patients in pursuing preauthorization for Repatha and PCSK9 based on protocol, as assigned.

8. *Documents patient interactions, results, patient questions/concerns and medication changes, in a timely manner.

9. *Responds to calls from patients, pharmacies, hospitals, nursing homes and other medical offices by use of telephone and computer in a timely manner, as assigned.

10. *Coordinates with assigned RN to provide care that is beyond practice scope; including triage of patient follow up, patient teaching, and abnormal test result communication.

11. *Organizes medications sample storage and checks for outdates; pulls sample medications refills for provider per protocol.

12. *Keeps rooms stocked, clean and ready for use; assists with ordering supplies as needed.

13. *Complies with HIPAA and maintains confidentiality in matters related to patient, family, staff, and providers.

14. * Provides care in a non-judgmental, compassionate, non-discriminatory manner remaining sensitive to the patients diversity, autonomy, dignity and rights.

15. *Responds appropriately to urgent /emergent situations and maintains compliance with OSHA and safety plan.

16. Notifies RN or Team Leader of problems/incidents related to staff or patients in a timely manner.

17. Maintains professional growth and development through seminars, workshops, and professional affiliations to keep abreast of latest trends in field of expertise.

18. Participates in meetings, committees and department projects as assigned.

19. Performs other related projects and duties as assigned.

(Essential Job functions are marked with an asterisk *. Refer to the Job Description Guide for the definition of essential and non-essential job functions.) Attach Addendum for positions with slightly different roles or work-specific differences as needed.

EDUCATION AND EXPERIENCE:

High School diploma or equivalency is required. Current certification as a Certified Medical Assistant (CMA), Clinical Certified Medical Assistant (CCMA), or a Registered Medical Assistant (RMA) required. Minimum of one (1) year work experience as a medical assistant in a relevant clinical setting is preferred, clinic and cardiovascular experience is preferred. Nebraska Medication Aide registry is preferred. Graduation from a Medical Assistant program accredited by the Accrediting Bureau of Health Education Schools preferred

Summary

GENERAL SUMMARY:

Responsible for assisting the Licensed Healthcare Provider (Physician, APRN, PA) and nurses with patient care, clerical, environmental and organizational tasks. Supports remote clinic sites with order entry and chart completion in the Electronic Health Record (EHR). Collaborates with other staff to achieve quality patient care and customer service goals. Works under the direction of a Registered Nurse.

PRINCIPAL JOB FUNCTIONS:

1. *Commits to the mission, vision, beliefs and consistently demonstrates our core values.

2. *Performs nursing care and assists provider(s) with examinations and procedures to serve the medical needs of patients, as assigned.

3. *Facilitates flow of patients in accordance with appointment time to avoid delays for the provider and undue waiting for patients.

4. *Greets and rooms patients; taking vital signs, updating patient history, preparing patient for examination/procedures, as assigned.

5. *Rooms patients via EHR status indicator for outstate clinics and enters clinical documentation, orders, and results received from clinic, as assigned.

6. *Instructs patient and family about tests/procedures, normal results, medications, nutrition and other health related issues utilizing approved protocol or written instruction, as assigned.

7. *Assists patients in pursuing preauthorization for Repatha and PCSK9 based on protocol, as assigned.

8. *Documents patient interactions, results, patient questions/concerns and medication changes, in a timely manner.

9. *Responds to calls from patients, pharmacies, hospitals, nursing homes and other medical offices by use of telephone and computer in a timely manner, as assigned.

10. *Coordinates with assigned RN to provide care that is beyond practice scope; including triage of patient follow up, patient teaching, and abnormal test result communication.

11. *Organizes medications sample storage and checks for outdates; pulls sample medications refills for provider per protocol.

12. *Keeps rooms stocked, clean and ready for use; assists with ordering supplies as needed.

13. *Complies with HIPAA and maintains confidentiality in matters related to patient, family, staff, and providers.

14. * Provides care in a non-judgmental, compassionate, non-discriminatory manner remaining sensitive to the patients diversity, autonomy, dignity and rights.

15. *Responds appropriately to urgent /emergent situations and maintains compliance with OSHA and safety plan.

16. Notifies RN or Team Leader of problems/incidents related to staff or patients in a timely manner.

17. Maintains professional growth and development through seminars, workshops, and professional affiliations to keep abreast of latest trends in field of expertise.

18. Participates in meetings, committees and department projects as assigned.

19. Performs other related projects and duties as assigned.

(Essential Job functions are marked with an asterisk *. Refer to the Job Description Guide for the definition of essential and non-essential job functions.) Attach Addendum for positions with slightly different roles or work-specific differences as needed.

EDUCATION AND EXPERIENCE:

High School diploma or equivalency is required. Graduation from a Medical Assistant program accredited by the Accrediting Bureau of Health Education Schools is required. Current certification as a Certified Medical Assistant (CMA) or a Registered Medical Assistant (RMA) designation issued by the Association of American Medical Technologists is required. Minimum of one (1) year work experience as a medical assistant in a relevant clinical setting is preferred, clinic and cardiovascular experience is preferred. Nebraska Medication Aide registry is preferred.

Summary

GENERAL SUMMARY:

Assists physicians with examinations and procedures to serve the medical needs of patients with various cardiac related health conditions in a professional, confidential, and caring manner. Coordinates the flow of patients, phone calls, lab work, and nurse visits to facilitate quality patient care and customer service goals. Provides professional nursing care as prescribed by the physician and in compliance with the Nebraska Nurse Practice Act, any applicable licensure/certification requirement and organizational policies and procedures.

PRINCIPAL JOB FUNCTIONS:

1. *Commits to the mission, vision, beliefs and consistently demonstrates our core values.

2. *Performs nursing and other patient care activities to ensure the physical and psychological well-being of the patient.

3. *Screens patients for appropriate information to ensure the Electronic Health Record (EHR) is current.

4. *Prepares patient for examination treatment through BHs rooming process; taking patient history and vital signs, completes medication reconciliation and accurately documents in the EHR available to the consulting physicians.

5. *Registers and maintains timely, complete information in the patients EHR and charts to ensure accurate patient care. Posts tests and examination results immediately.

6. *Upon direct assignment, supports provider(s) in a primary role, coordinating and facilitating patient care and follow up to achieve quality patient care and customer service goals.

7. *Ensures that exam rooms are clean and well stocked with necessary equipment and supplies.

8. *Prepares equipment and aides physician during examination of patients.

9. *Performs electrocardiograms.

10. *Dispenses medication as directed. Observes and records patients condition and reaction to drugs and treatments, and reports same to provider.

11. *Educates patients and their families about diagnostic procedures, medications, post-treatment instructions, nutrition and maintenance of general health and wellness.

12. *Understands diagnosis allowed for ordering tests/procedures to ensure reimbursement.

13. Assists Bryan Heart with pre-authorizations, release of information requests, FMLA certification, etc.

14. Responds to/refers incoming patient treatment-related phone calls.

15. Maintains patient confidentiality.

16. Manages work hours, supplies, and other clinical costs in line with fiscal responsibility and budget.

17. Attends meetings and participates on committees as assigned.

18. May assist provider in both Lincoln and Outreach Clinic sites.

19. Maintains professional growth and development through seminars, workshops, and professional affiliations to keep abreast of latest trends in field of expertise.

20. Participates in meetings, committees and department projects as assigned.

21. Performs other related projects and duties as assigned.

(Essential Job functions are marked with an asterisk *. Refer to the Job Description Guide for the definition of essential and non-essential job functions.) Attach Addendum for positions with slightly different roles or work-specific differences as needed.

EDUCATION AND EXPERIENCE:

Graduation from an accredited professional nursing program required. Current licensure as a Licensed Practical Nurse (LPN) in the State of Nebraska required. Minimum of one (1) year nursing experience required, clinic nursing preferred.