Mango Jobs in Usa
472 positions found — Page 11
Air Force, Space Force, and Navy under the Joint Range Technical Services Contract, better known as J-Tech II.
JT4 develops and maintains realistic, integrated test and training environments and prepares our nation's war-fighting aircraft, weapons systems, and aircrews for today's missions and tomorrow's global challenges.
Job Summary -- Essential Functions/Duties Under minimum direction of a supervisor or engineering personnel and with considerable latitude for independent and innovative actions within a technical area, a Drafter designs and/or creates layouts of complex major and minor systems, assemblies, and components, using various software programs, or freehand drawings.
Employee will be responsible for the following functions/duties: Prepare multiple-view mechanical detail and assembly drawings often of a complex nature from layout drawings, sketches, existing or prototype parts, and or verbal instructions Perform other routine drafting activities such as revising or redrawing existing drawings, making blocks, cells, etc.
Use a variety of precision measuring tools to verify or obtain data for drawing development Provide complete printed circuit board drawing packages to include assemblies, detail drawings, smart schematics, Gerber files, etc.
Research scientific and technical materials, standards, and specifications for information and selection of components Ensure all work conforms to DoD MIL-STD-100 and company drafting standards Provide information and direction to lower-level drafters as necessary Perform other job-related duties, as required Other Responsibilities Each employee must read, understand, and implement the general and specific operational, safety, quality, and environmental requirements of all plans, procedures, and policies pertaining to their job.
Working Conditions Work is performed in a typical office environment with no unusual hazards.
Occasional lifting (up to 20 pounds), constant sitting while using the computer terminal, constant use of sight abilities while reviewing documents, constant use of speech/hearing abilities for communication, and constant mental alertness are required.
The foregoing conditions and physical requirements represent the general characteristics required to perform the essential functions for this job.
In general, all positions may require standing, walking, sitting, lifting, carrying, pushing, pulling, climbing, bending, twisting, kneeling, crouching and crawling.
Specific work assignments may include additional environmental conditions or physical requirements necessary to perform the essential functions of the job.
Travel to remote company work locations will be required.
Requirements -- Education, Technical, and Work Experience A graduate certificate from an accredited two- to four-year technical institute, or equivalent, and a minimum of 10 years of experience in a related field are required for this position.
In addition, a Drafter must possess the following qualifications: Competence in the use of a variety of CAD software programs such as MicroStation, AutoCAD, Schematic Capture, and PCB Auto-router tool, as appropriate Effective verbal and written communication skills Planning/organizational skills Ability to work under deadlines.
Disclaimer The above statements are intended to describe the general nature and level of work being performed by personnel assigned to this classification.
They are not intended to be construed as an exhaustive list of all responsibilities, duties, and skills required of persons so classified.
Tasking is in support of a Federal Government Contract that requires U.S.
citizenship.
Some jobs may require a candidate to be eligible for a government security clearance, state-issued driver's license, or other licenses / certification, and the inability to obtain and maintain the required clearance, license, or certification may affect and employee's ability to maintain employment.
SCC: JOTDA18; A3UTTR
Air Force, Space Force, and Navy under the Joint Range Technical Services Contract, better known as J-Tech II.
JT4 develops and maintains realistic, integrated test and training environments and prepares our nation's war-fighting aircraft, weapons systems, and aircrews for today's missions and tomorrow's global challenges.
JOB SUMMARY
- ESSENTIAL FUNCTIONS/DUTIES Performs a variety of fundamental field engineering tasks under general supervision of a senior level engineer, involved in the installation, operations, testing and maintenance of electronic equipment and systems.
Conducts research and reference reading to assist higher-level engineers in obtaining technical information and keeps informed of currently approved standards, codes, and procedures applied to engineering specialty.
Performs engineering or other highly technical tasks that are varied and may be somewhat difficult in character.
Plans and carries out successive engineering steps and resolves technical problems by standard practices and techniques, such as tolerance studies and design calculations.
Supports projects with limited scope or parts of more complex projects with detailed instructions on the intent and scope of the documents to be prepared.
Generate sections of design specifications of more complex projects or complete specifications of less complex projects.
Using computer-assisted test methods, conducts laboratory investigations on equipment or systems.
Assists in preparation of reports, correspondence or technical studies.
Studies currently approved standards, codes, and procedures applied to the engineering specialty.
Prepare, deliver and submit technical presentations for in-process design and review meetings.
Perform all other position related duties as assigned or requested.
DESIRED QUALIFICATIONS The candidate must meet the following requirements: Experience working with enterprise IT hardware or digital video projection systems or aircraft simulators or military aircraft instrumentation/avionics.
Interpret building blueprints, electrical and mechanical schematics.
Experience using test equipment such as: Ethernet cable tester, Digital multi meter, fiber inspection scope, ethernet/fiber cable analyzer.
Must be able to create basic documents using Microsoft Office Suite and effectively communicate inside and outside of the team using Microsoft Outlook and Teams.
Must be familiar with the safe and proper use of common hand tools.
Must be able to work independently or in a team environment.
Must be able to perform research and apply knowledge to develop new technician policies and procedures.
Must be able to lift objects up to 50 pounds and work in a hands-on environment.
Must qualify for and maintain a government security clearance and possess a current state issued driver's license.
The candidate should meet most of the following requirements: Experience with Windows Server operating systems.
Build and test shielded Ethernet cables and single/multi-mode fiber lines.
Troubleshoot and maintain Projection/video systems.
Basic computer networking skills with some administrative tasks.
Familiarity with Linux (preferably Red Hat) command line and desktop interfaces Familiarity with HOTAS (hands on throttle and stick) style flight controls Familiarity with KVM consoles/switches, as well as remote management protocols (rdp, ssh, etc.).
REQUIREMENTS
- EDUCATION, TECHNICAL, AND WORK EXPERIENCE Associate's Degree in Engineering or other technical discipline or formal academic/vocational/military training and a minimum of 7 or more years of technical/professional experience in the specialty field.
Must have a professional knowledge of applicable engineering concepts and principles, and a familiarity with related engineering fields.
Must have a practical knowledge of test methods and practices sufficient to perform routine to more complex engineering procedures and to prepare or make minor modifications of standard test procedures or test equipment work instructions.
Incumbent must have a valid, current state driver's license.
Must qualify for and maintain a Security Clearance.
U.S.
Citizenship is required.
BENEFITS Medical, Dental, Vision Insurance Benefits Active on Day 1 Life Insurance Health Savings Accounts/FSA's Disability Insurance Paid Time Off 401(k) Plan Options with Employer Match JT4 will match 50%, up to an 8% contribution 100% Immediate Vesting Tuition Reimbursement OTHER RESPONSIBILITIES Each employee must read, understand, and implement the general and specific operational, safety, quality, and environmental requirements of all plans, procedures, and policies pertaining to their job.
WORKING CONDITIONS This position involves work typical of an office environment with no unusual hazards.
There is occasional lifting (up to 20 pounds), constant sitting and use of a computer terminal, constant use of sight abilities while writing, reviewing, and editing documents, constant use of speech/hearing abilities for communication, and constant mental alertness.
Routine travel to remote Company work locations may be required.
DISCLAIMER The above statements are intended to describe the general nature and level of work being performed by personnel assigned to this classification.
They are not intended to be construed as an exhaustive list of all responsibilities, duties, and skills required of persons so classified.
Tasking is in support of a Federal Government Contract that requires U.S.
citizenship.
Some jobs may require a candidate to be eligible for a government security clearance, state-issued driver's license or other licenses/certifications, and the inability to obtain and maintain the required clearance, license or certification may affect an employee's ability to maintain employment.
SCC: JENG17, A1412TW
We provide workforce solutions to Global 1000 companies in Technology, Engineering, Finance, Clinical Research, Scientific, Digital/Creative/Marketing space.
Mindful of the opportunity gap, we provide balanced solutions for both employers and job seekers—elevating the standards of recruitment practice to a whole new level.
Our aim is to make a difference in the lives of job seekers by providing them with opportunities that broaden career horizons and expand skill sets.
We take pride in being a strong driver of mindfulness and balance at workplace.
EEO: “Mindlance is an Equal Opportunity Employer and does not discriminate in employment on the basis of – Minority/Gender/Disability/Religion/LGBTQI/Age/Veterans.” Job Title: Phlebotomist I (Floating) Job Category: Healthcare Industry: Diagnostics Job Location: Pasco WA 99301 Top 3/5 Skills: Phlebotomy Blood Draw Specimen Collection Shift Schedule: Candidate will need to be available from 7AM to 5:30 PM depending on what location they are covering.
Some locations open as early as 7 and some close as late as 5:30.
Shifts will be 8-hour shifts Department: Phlebotomist I (Floating) Job Category: Healthcare Job Duties: WA state phlebotomy license [MA-PC] Required ! Work location will be, float to the following areas.
The HM will send out a schedule on where the person is to report a week before.
This would be for a Float.
Candidate will need to be available from 7AM to 5:30 PM depending on what location they are covering.
Some locations open as early as 7 and some close as late as 5:30.
Shifts will be 8-hour shifts Will be required to travel other locations; weekly schedule is sent out to the worker letting them know what location they will be reporting too • How many draws are required daily? Could see about 30 patients depending on the location covering.
• What is the work environment? PSC • If this is a patient service center, how big is the location? • How long is the worker expected to stand? Standing while drawing blood • Are there any specialties? Can see both populations of both Geri and Pedi so experience preferred • Will this person work with a team or alone- working as a team • Training will be, orientation 1st week & then they will move to the IOP location to complete training.
Vaccine requirements- TB and Color Vision are required for this location
Air Force, Space Force and Navy under the Joint Range Technical Services Contract, better known as J-Tech II.
JT4 develops and maintains realistic, integrated test and training environments and prepares our nation's war-fighting aircraft, weapons systems, and aircrews for today's missions and tomorrow's global challenges.
JOB SUMMARY
- ESSENTIAL FUNCTIONS AND DUTIES Evaluates system specifications, deploys enterprise computer systems, configures enterprise system services, establishes standards, ensures hardware/software compatibility and maintains server systems focusing on the Operating System and the network.
Employee will be responsible for the following functions/duties: Performs the daily operational support on the computer Operating System to include system security, access, configuration, backups and restores Specifies network requirements, monitors local area network (LAN) performance, troubleshoots networking hardware and insures system is working properly according to specifications and parameters.
Organizes and secures directory structure and assists/trains staff members in the use of department Document Management (DM) Systems, associated databases and Configuration Management (CM)/ DM release procedures Specifies hardware requirements and provides Computer Authorization and custodial receipt listings to track equipment configurations and identification logs Serves as point of contact (POC) for problem reporting, incremental version updates and monitors yearly support contracts Makes recommendations for future hardware/software implementations and related process improvements, schedules, plans and performs system upgrades including the transition from design, test, production and documentation environments Provides operational status as required Uses established policies, procedures, and subject matter knowledge to complete complex assignments requiring originality and ingenuity performed under minimum supervision with considerable latitude for independent contribution Analyzing system logs and identifying potential issues with computer systems.
Manage and administer storage solutions including Network-Attached Storage and Storage Area Network (NAS/SAN) systems.
Other duties as required RANGE POSITION DESCRIPTION Independent problem solver and great communicator that excels in administering and deploying Red Hat Enterprise Linux systems.
Prefer someone with direct hands on experience and navigation within Red Hat Linux using the command line interface.
Must be able to work well with different teams and entities.
Must be proficient in Red Hat Enterprise Linux, SUSE Linux a plus At least 5 years of experience building and managing Red Hat systems Must be able to manage Red Hat using CLI not just from the GUI Preferred to have Ansible experience Preferred to have Scripting experience Must be able to configure a hybrid environment composed of Windows and Red Hat systems Must be able to patch Red Hat systems Must be able to obtain a Sec+ certification, if the candidate does not already have it.
Must be obtained within 6 months of employment.
REQUIREMENTS
- EDUCATION, TECHNICAL, AND WORK EXPERIENCE Bachelors degree in associated discipline from an accredited academic institution or equivalent experience through technical training, completion of a recognized certification program, or experience.
Requires at least 9 years of experience in computer system related areas of expertise.
Must possess and apply a broad knowledge of principles, practices, and procedures in computer science, graphics, and information systems.
Must have specific experience in the maintenance of Operating Systems and support applications, in a centralized and distributed server environment.
Must be able obtain and maintain a government security clearance.
Most possess a valid, state-issued driver's license.
Must be a U.S.
citizen.
SALARY The expected pay range for this position is $125,000 to $150,000 annually.
Note: The salary range offered for this position is a good faith description of the expected salary range this role will pay.
JT4 LLC considers factors such as (but not limited to) responsibilities of the position, candidate's work experience, education/training, key skills, internal peer equity, as well as, market and business considerations when extending an offer.
BENEFITS Medical, Dental, Vision Insurance Benefits Active on Day 1 Life Insurance Health Savings Accounts/FSA's Disability Insurance Paid Time Off 401(k) Plan Options with Employer Match JT4 will match 50%, up to an 8% contribution 100% Immediate Vesting Tuition Reimbursement OTHER RESPONSIBILITIES Will be asked to make functional the initiatives established by management and will coordinate with other organizations as affected by upgrades, capabilities, policy and procedures.
Each employee must read, understand, and implement the general and specific operational, safety, quality, and environmental requirements of all plans, procedures, and policies pertaining to their job.
WORKING CONDITIONS This position involves work typical of an office environment with no unusual hazards.
There is occasional lifting (up to 20 pounds), constant sitting and use of a computer terminal, constant use of sight abilities while writing, reviewing, and editing documents, constant use of speech/hearing abilities for communication, and constant mental alertness.
The incumbent must possess planning/organizing skills and must be able to work under deadlines.
DISCLAIMER The above statements are intended to describe the general nature and level of work being performed by personnel assigned to this classification.
They are not intended to be construed as an exhaustive list of all responsibilities, duties, and skills required of persons so classified.
Tasking is in support of a Federal Government Contract that requires U.S.
citizenship.
Some jobs may require a candidate to be eligible for a government security clearance, state-issued driver's license or other licenses/certifications, and the inability to obtain and maintain the required clearance, license or certification may affect an employee's ability to maintain employment.
SCC: CSAN6, JIT13; A1412TW
Job Description
At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.
The Boeing Company is currently seeking an Experienced Embedded Software Engineerto support ourPrecision Engagement Systems located in Saint Charles, MO.The Precision Engagement Systems organization is a strong and growing business that produces a variety of precision-guided weapons, which are employed around the world to support the defense of the United States and more than 30 U.S. allied countries.
Our leadership team is committed to attracting and developing top talent to support critical Direct Attack (DA) and Cruise Missile Systems (CMS) missions. Aligned with customer objectives, we deliver tailored software solutions through our exceptional workforce. In Saint Charles, MO, we support Direct Attack weapons (JDAM, SDB, MOP, HAAWC and derivatives) and Cruise Missiles (SLAM-ER, Harpoon legacy and development weapons) deployed on a range of military aircraft and select ground platforms.
Join Us. Build the Future.
We are seeking talented experienced software engineers to work with a multi-discipline engineering team to design and develop software solutions for these platforms. Engineers on this team work in all phases of the software development lifecycle.We are actively building the team to achieve a growing work scope that includes implementing real-time embedded software applications, creating models and simulations, deploying DevOps methodologies and development environments, developing support applications, and maintaining software configurations and processes for an Agile development lifecycle.
Why Boeing:
Work on systems that matter—delivering mission-critical capabilities with global impact.
A culture that supports technical excellence, mentorship, and professional growth.
The resources and partnerships to take on ambitious engineering challenges and see ideas through to deployment.
A comprehensive benefits package including generous Paid Time Off (PTO), flexible work environment, paid parental leave, industry leading 401k matching, very generous tuition assistance for earning advanced degrees, and paid medical leave programs. For more information, click here.
Why St. Charles, MO:
On-site cafeteria offering hot meals and grab-and-go options.
Active Employee Resource Groups (ERGs) providing networking, mentorship, and community engagement.
Campus walking path and outdoor spaces for breaks, walking meetings, and wellness activities.
Fitness and wellness programs, local commuter resources, and community events.
Position Responsibilities:
Collaborate with a multi-discipline engineering team to create and implement Operational Flight Program software solutions
Contribute in all phases of the software development lifecycle in an Agile development environment
Develop solutions using Ada, C#, and Python
Test your software and assist system level testing to verify correct software functionality
Analyze problem reports and troubleshooting software defects
Develop leadership skills and experience
Opportunity to work directly with United States Air Force and Navy customers
Basic Qualifications (Required Skills/ Experience):
3+ years of experience in real-time embedded software development
3+ years of experience in developing software using Object Oriented principles
3+ years of experience working in a team environment
Preferred Qualifications:
Bachelor of Science degree from an accredited course of study in engineering, engineering technology (includes manufacturing engineering technology), chemistry, physics, mathematics, data science, computer science, computer engineering, software engineering or equivalent experiencestrongly preferred
Active U.S. secret clearance
Experience with Ada, Python, or C#
Experience working in an Agile software development environment
Experience with Git or a similar version control system
Experience developing and tracing software requirements
Drug Free Workplace:
Boeing is a Drug Free Workplace (DFW) where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.
Relocation:
This position offers relocation based on candidate eligibility. Note: Basic relocation will be offered for eligible internal candidates.
CodeVue Coding Challenge:
To be considered for this position you will be required to complete a technical assessment as part of the selection process. Failure to complete the assessment will remove you from consideration.
Pay & Benefits:
At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.
The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.
The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.
Pay is based upon candidate experience and qualifications, as well as market and business considerations.
Summary pay range for Experienced Level (Level 3): $119,000 - $161,000
Applications for this position will be accepted until Mar. 27, 2026
Export Control Requirements:
This is not an Export Control position.
Relocation
This position offers relocation based on candidate eligibility.
Security Clearance
This position requires the ability to obtain a U.S. Security Clearance for which the U.S. Government requires U.S. Citizenship. An interim and/or final U.S. Secret Clearance Post-Start is required.
Visa Sponsorship
Employer will not sponsor applicants for employment visa status.
Shift
This position is for 1st shift
Equal Opportunity Employer:
Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
Ensures C-section suite is adequately prepared for the procedures.
Ensures all instruments are cleaned and sterilized and functioning properly.
Participates in department staff meetings and performance improvement activities.
Standards of care initiated in accordance with unit standards.
Appropriate resources identified and utilized in accordance with unit guidelines.
Decisions made within scope of practice.
Possess basic knowledge of policies and procedures.
Demonstrates solid clinical knowledge base and safe clinical skills.
Recognizes and responds appropriately to changes in patient condition.
Effective time management.
Evaluates and modifies care based on patient response.
Evaluates and modifies standards of care based on achieved patient outcomes.
Adapts procedures to be age-specific.
Schedules tests and treatments efficiently in accordance with established policies and procedures Attends vaginal deliveries to assist RN and physician Performs related duties as required.
Fort Mill Medical Center Hospital is committed to providing exceptional patient care in a supportive and collaborative environment.
As a member of our team, you will have the opportunity to work with advanced technology and be part of a healthcare community dedicated to making a positive impact on the lives of our patients.
At Fort Mill Medical Center, we understand that our greatest asset is our dedicated team of professionals.
That's why we offer more than a job
- we provide a comprehensive benefit package that prioritizes your health, professional development, and work-life balance.
The available plans and programs include: Medical, dental, vision, and life insurance 401(k) retirement savings plan with employer match Generous paid time off Career development and continuing education opportunities Health savings accounts, healthcare & dependent flexible spending accounts Employee Assistance program, Employee discount program Voluntary benefits include pet insurance, legal insurance, accident and critical illness insurance, long term care, elder & childcare, auto & home insurance Note : Eligibility for benefits may vary by location and is determined by employment status Piedmont Medical CenterFort Mill opened in 2022 to serve the growing and vibrant community of Fort Mill, SC.
This 100-bed facility features advanced technology, all-new equipment, and a compassionate staff.
Services include a 24/7 emergency department, an intensive care unit, a medical/surgical unit, and comprehensive womens careincluding The Nest, a dedicated space for labor and delivery.
Join our team! Required: Minimum Education: Some college or vocational training required.
Required Certifications/Registrations/Licenses: American Heart Association BLS CPR certification required, must be obtained within 7 days of hire.
A person may not practice Surgical Technology in a healthcare facility unless the person meets one of the following requirements: Is currently certified with the National Board of Surgical Technology and Surgical Assisting (NBSTSA) OR Is a new graduate from an accredited education program for Surgical Technology.
A new graduate may practice for up to three months before completing certification by the National Board of Surgical Technology and Surgical Assisting (NBSTSA), NBSTSA certification is required within 90 days of employment.
OR Is a person who has completed an appropriate training program for Surgical Technology in the United States Army, Navy, Air Force, Marine Corps, or Coast Guard or in the United States Public Health Service.
OR Is a person provides evidence that they were employed to practice Surgical Technology in a health care facility in South Carolina prior to January 1, 2008.
Preferred: Experience: Up to 1 to 2 years of job-related experience is preferred.5c143e31-5e48-4549-b638-05792d185386
Ensures endoscopic suite is adequately prepared for the procedures.
Ensures all instruments are cleaned and sterilized and functioning properly.
Participates in department staff meetings and performance improvement activities.
Standards of care initiated in accordance with unit standards.
Appropriate resources identified and utilized in accordance with unit guidelines.
Decisions made within scope of practice.
Possess basic knowledge of policies and procedures.
Demonstrates solid clinical knowledge base and safe clinical skills.
Recognizes and responds appropriately to changes in patient condition.
Effective time management.
Evaluates and modifies care based on patient response.
Evaluates and modifies standards of care based on achieved patient outcomes.
Adapts procedures to be age-specific.
Schedules tests and treatments efficiently in accordance with established policies and procedures Attends vaginal deliveries to assist RN and physician Performs related duties as required.
Piedmont Medical Center Hospital is committed to providing exceptional patient care in a supportive and collaborative environment.
As a member of our team, you will have the opportunity to work with advanced technology and be part of a healthcare community dedicated to making a positive impact on the lives of our patients.
At Piedmont Medical Center, we understand that our greatest asset is our dedicated team of professionals.
That's why we offer more than a job
- we provide a comprehensive benefit package that prioritizes your health, professional development, and work-life balance.
The available plans and programs include: Medical, dental, vision, and life insurance 401(k) retirement savings plan with employer match Generous paid time off Career development and continuing education opportunities Health savings accounts, healthcare & dependent flexible spending accounts Employee Assistance program, Employee discount program Voluntary benefits include pet insurance, legal insurance, accident and critical illness insurance, long term care, elder & childcare, auto & home insurance Note : Eligibility for benefits may vary by location and is determined by employment status Piedmont Medical Center (PMC) has served the community of York County and beyond for more than 30 years.
Piedmont Medical Center Rock Hill is a 288-bed facility that has advanced equipment and experienced healthcare staff catering to the diverse needs of the community it serves.
Services include preventive care, advanced heart and stroke care, maternity care and a Level III NICU.
Piedmont Medical Center
- Fort Mill opened in 2022 with 100-beds, advanced technology and a compassionate care team.
The new hospital features a 24/7 Emergency Department, Intensive Care Unit, Medical/Surgical Unit, and a wide array of Surgical Services and Women's Services.
PMC has been recognized for its elite level of safety by being awarded the Leapfrog Groups A Hospital Safety Score and the Certified Zero Harm Award by SCHA (South Carolina Hospital Association) in collaboration with South Carolinas DHEC.
The Cardiac Care program at PMC provides quality care and was designated as a Blue Distinction Center for Cardiac Care by BlueCross BlueShield and a Nationally Certified Cardiac Rehabilitation Program by the American Association of Cardiovascular and Pulmonary Rehabilitation.
At Piedmont Medical Center, you can grow your career skills and be a vital member of our team dedicated to improving the health of the community.
Join our team! Required: Minimum Education: Some college or vocational training required.
Required Certifications/Registrations/Licenses: American Heart Association BLS CPR certification required, must be obtained within 7 days of hire.
A person may not practice Surgical Technology in a healthcare facility unless the person meets one of the following requirements: Is currently certified with the National Board of Surgical Technology and Surgical Assisting (NBSTSA) OR Is a new graduate from an accredited education program for Surgical Technology.
A new graduate may practice for up to three months before completing certification by the National Board of Surgical Technology and Surgical Assisting (NBSTSA), NBSTSA certification is required within 90 days of employment.
OR Is a person who has completed an appropriate training program for Surgical Technology in the United States Army, Navy, Air Force, Marine Corps, or Coast Guard or in the United States Public Health Service.
OR Is a person provides evidence that they were employed to practice Surgical Technology in a health care facility in South Carolina prior to January 1, 2008.
Preferred: Experience: Up to 1 to 2 years of job-related experience is preferred.5c143e31-5e48-4549-b638-05792d185386
Ensures C-section suite is adequately prepared for the procedures.
Ensures all instruments are cleaned and sterilized and functioning properly.
Participates in department staff meetings and performance improvement activities.
Standards of care initiated in accordance with unit standards.
Appropriate resources identified and utilized in accordance with unit guidelines.
Decisions made within scope of practice.
Possess basic knowledge of policies and procedures.
Demonstrates solid clinical knowledge base and safe clinical skills.
Recognizes and responds appropriately to changes in patient condition.
Effective time management.
Evaluates and modifies care based on patient response.
Evaluates and modifies standards of care based on achieved patient outcomes.
Adapts procedures to be age-specific.
Schedules tests and treatments efficiently in accordance with established policies and procedures Attends vaginal deliveries to assist RN and physician Performs related duties as required.
Embark on a rewarding career with Piedmont Medical Center hospital.
If you are a compassionate healthcare professional eager to contribute to patient care, this is your opportunity where your skills make a difference every day.
Join us in delivering exceptional healthcare with a personal touch.
At Piedmont Medical Center, we understand that our greatest asset is our dedicated team of professionals.
That's why we offer more than a job
- we provide a comprehensive benefit package that prioritizes your health, professional development, and work-life balance.
The available plans and programs include: Medical, dental, vision, and life insurance 401(k) retirement savings plan with employer match Generous paid time off Career development and continuing education opportunities Health savings accounts, healthcare & dependent flexible spending accounts Employee Assistance program, Employee discount program Voluntary benefits include pet insurance, legal insurance, accident and critical illness insurance, long term care, elder & childcare, auto & home insurance Note : Eligibility for benefits may vary by location and is determined by employment status Piedmont Medical Center (PMC) has served the community of York County and beyond for more than 30 years.
Piedmont Medical Center Rock Hill is a 288-bed facility that has advanced equipment and experienced healthcare staff catering to the diverse needs of the community it serves.
Services include preventive care, advanced heart and stroke care, maternity care and a Level III NICU.
Piedmont Medical Center
- Fort Mill opened in 2022 with 100-beds, advanced technology and a compassionate care team.
The new hospital features a 24/7 Emergency Department, Intensive Care Unit, Medical/Surgical Unit, and a wide array of Surgical Services and Women's Services.
PMC has been recognized for its elite level of safety by being awarded the Leapfrog Groups A Hospital Safety Score and the Certified Zero Harm Award by SCHA (South Carolina Hospital Association) in collaboration with South Carolinas DHEC.
The Cardiac Care program at PMC provides quality care and was designated as a Blue Distinction Center for Cardiac Care by BlueCross BlueShield and a Nationally Certified Cardiac Rehabilitation Program by the American Association of Cardiovascular and Pulmonary Rehabilitation.
At Piedmont Medical Center, you can grow your career skills and be a vital member of our team dedicated to improving the health of the community.
Join our team! Minimum Education: Some college or vocational training required.
Required Certifications/Registrations/Licenses: American Heart Association BLS CPR certification required, must be obtained within 7 days of hire.
A person may not practice Surgical Technology in a healthcare facility unless the person meets one of the following requirements: Is currently certified with the National Board of Surgical Technology and Surgical Assisting (NBSTSA) OR Is a new graduate from an accredited education program for Surgical Technology.
A new graduate may practice for up to three months before completing certification by the National Board of Surgical Technology and Surgical Assisting (NBSTSA), NBSTSA certification is required within 90 days of employment.
OR Is a person who has completed an appropriate training program for Surgical Technology in the United States Army, Navy, Air Force, Marine Corps, or Coast Guard or in the United States Public Health Service.
OR Is a person provides evidence that they were employed to practice Surgical Technology in a health care facility in South Carolina prior to January 1, 2008.
Preferred: Experience: Up to 1 to 2 years of job-related experience is preferred.5c143e31-5e48-4549-b638-05792d185386
Job Description
At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.
Tapestry Solutions, A Boeing Company, brings over 30 years of industry experience designing, implementing, training, and supporting high-quality, cost-effective information technology and business intelligence solutions. With a dedicated team of approximately 500 professionals, we proudly serve 75 defense, commercial, and government clients across more than 50 U.S. locations and 9 countries worldwide.
As a trusted partner, our employees embody our core values by consistently delivering excellence, taking full ownership, and developing innovative solutions that enable critical missions and ensure the safety of our global customers and team members. Joining Tapestry Solutions means enjoying the best of both worlds: access to the vast resources of Boeing combined with the agility and people-focused, family-oriented culture of a small business where your contributions truly matter.
Tapestry Solutions, a part of Boeing Global Services BGS, is seeking a Software Systems Engineer in Hazelwood, MO for the Department of Navy Tomahawk Land-Attack Missile program. The Tomahawk program is proliferating to include additional US and foreign customers and will remain relevant for many more years.
The successful candidate for this Software Systems Engineer position will play a crucial role in designing, developing, testing, and maintaining software system and subsystem engineering models utilizing Catia Magic Systems of Systems Architect throughout the end-to-end lifecycle that meets industry, customer, and safety standards for the Tomahawk program, while adhering to strict government regulations. You will have the opportunity to review, analyze, and translate customer requirements and technical specifications for stakeholder use. Your expertise will be instrumental in developing, maintaining, enhancing, and optimizing system and subsystem components and functionalities for systems integrations. Additionally, you will be a system and subsystem resource to team members, who will debug and resolve issues identified to ensure the reliability and efficiency of software products.
Position Responsibilities:
Model-Based Systems Engineering (MBSE) using Catia Magic Systems of Systems Architect, and Department of Defense Architecture (DoDAF).
Manage requirements, tracking, and verification for Tomahawk Mission Planning (TMP) systems change requests (CRs)
Apply an interdisciplinary, collaborative approach to plan, design, develop and verify a lifecycle balanced system of systems and system solutions
Evaluate customer and operational needs to define and coordinate system performance requirements, integrate technical parameters, and assure compatibility of all physical, functional and program interfaces
Develop and maintain system engineering models, documentation, and brief important modifications to key stakeholders.
Develop, document, and maintain architectures, requirements, interfaces, designs, and algorithms for TMP system
Collaborate with software development team to share expertise and knowledge
Drive TMP software architecture, design, and approach through Software system and subsystem component documentation development, selection, tailoring and deployment, tools, and metrics
Accuracy and accountability are essential. Your expectations include developing software requirement plans, providing technical solutions for a diverse range of challenges, implementing TMP and Industry standard software processes as well as collaborating with and providing guidance to less experienced team members
Basic Qualifications (Required Skills/Experience):
Active U.S. Secret Clearance or higher
Experience using Catia Magic Systems of Systems, DoDAF or similar Model-Based System Engineering (MBSE) software
Proficiency in .Net Framework and sysML (or extensive Unified Modeling Language)
Experience in managing DoD contracts requirements
Experience in all aspects of designing and implementing system architecture, requirements, software, and software testing
Preferred Qualifications (Desired Skills/Experience):
Experience in handling documentation products for the use of developers and stakeholders, specifically regarding requirements and systems of systems
Experience with software design and development tools such as, Subversion, Azure DevOps, Git
Experience with Navigation Modeling and Flight Simulation
Drug Free Workplace:
We are a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.
Pay & Benefits:
We strive to deliver a total rewards package that will attract, engage, and retain the top talent. Elements of this package include competitive base pay and variable compensation opportunities.
We also provide eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and other programs that provide for both paid and unpaid time away from work.
The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location and date of hire.
Pay is based upon candidate experience and qualification, as well as market and business considerations.
Summary base pay range $118,150 - $152,900
Applications for this position will be accepted until Apr. 04, 2026
Export Control Requirements:
This is not an Export Control position.
Relocation
Relocation assistance is not a negotiable benefit for this position.
Security Clearance
This position requires an active U.S. Secret Security Clearance (U.S. Citizenship Required). (A U.S. Security Clearance that has been active in the past 24 months is considered active)
Visa Sponsorship
Employer will not sponsor applicants for employment visa status.
Shift
This position is for 1st shift
Equal Opportunity Employer:
Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
The Guidewire Billing Center Developer position is a mid-level role; operates autonomously, broad impact across multiple systems and the IT division. Seen as an expert in design and development and leads some development initiatives.
This role includes a competitive $10,000 signing bonus offered for qualified candidates.
Salary Range: $84,200.00 - $124,000.00
Salary is commensurate to experience, location, etc.
- Experience in Guidewire specific software development lifecycle and project life cycle
- Maintain software applications, including upgrade, enhancements, and patches
- Diagnose and resolve system problems
- Ensure application performance, reliability and quality
- Work closely with DevOps to drive system stability through CI/CD implementations
- Drive innovation through research of new technology, existing technology, and process improvement, asking 'how can we do it better'
- Work on POCs for help determine best path forward with Growth and Run initiatives
- Work across departmental lines to improve HM development capabilities
- Create and maintain Enterprise Packages and keep them updated as environment changes
- Provide consultation with technical and system business knowledge on Guidewire applications
- Responsible for application analysis, tuning and measurement to ensure appropriate performance, reliability and quality SLAs
- Collaborate with the user community to design, develop and implement technology solutions across multiple business functions; leads other software engineers to accomplish.
- Mentor and coach others
- Adept development knowledge in applicable programming languages and/or superior knowledge of web design languages, scripting tools and protocols.
Job Requirements:
- College degree in computer science or other technical field required or equivalent work experience.
- 5-7 years of experience with Guidewire Billing Center analysis, developing and testing code required
- Must be certified to work in Guidewire cloud up to the version (Mammoth) that Horace Mann has implemented Guidewire Developer Cloud Certification Associate Certification - InsuranceSuite 10.0 Developer
- Working experience using one or more of the following skill sets: Java, PowerShell, Apache Camel
- Familiar with tools such as Gosu, Postgresql, Azure, GIT & Cloud Platform components and integrated system components.
- 3years experience working with medium to complex assignments and structures
Horace Mann was founded in 1945 by two Springfield, Illinois, teachers who saw a need for quality, affordable auto insurance for teachers. Since then, we've broadened our mission to helping all educators protect what they have today and prepare for a successful tomorrow. And with our broadened mission has come corporate growth: We serve more than 4,100 school districts nationwide, we're publicly traded on the New York Stock Exchange (symbol: HMN) and we have more than $12 billion in assets.
We're motivated by the fact that educators take care of our children's future, and we believe they deserve someone to look after theirs. We help educators identify their financial goals and develop plans to achieve them. This includes insurance to protect what they have today and financial products to help them prepare for their future. Our tailored offerings include special rates and benefits for educators.
EOE/Minorities/Females/Veterans/Disabled. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status
For applicants that are California residents, please review our California Consumer Privacy Notice
All applicants should review our Horace Mann Privacy Policy
