Malcolm Drilling Jobs in Usa

The Director of Risk and Safety (EHS / Safety & Compliance) provides safety leadership and regulatory oversight across Country Meadows’ 10 communities throughout central and eastern Pennsylvania and one community in Maryland, helping ensure safe, compliant, and well-prepared environments for residents and coworkers. In partnership with operations leadership and community teams, this role coordinates safety programs, emergency preparedness initiatives, OSHA compliance, and regulatory oversight that support high-quality senior living operations and strengthen safety practices across the organization.

• Full-time Monday-Friday in-office at our Home Office location in Hershey, PA.
• Occasional travel to any of our 10 campuses located in Central, PA, Lehigh Valley, PA and Frederick, MD.
• Starting annual salary: $80,000 – $95,000, based on experience and qualifications and a competitive total rewards package including comprehensive benefits and generous paid time off

Director of Risk and Safety (EHS / Safety & Compliance) Responsibilities:

Fire Inspection & Emergency Preparedness

• Coordinate monthly fire drills, annual fire inspections, emergency preparedness drills,
• and elopement drills across all communities; document results and ensure follow-up compliance.
• Maintain and oversee the company Emergency Preparedness Manual and prepare required Department of Human Services filings.
• Provide annual fire extinguisher training and deliver Department of Human Services “train-the-trainer” instruction for coworkers responsible for new hire and annual fire safety training.

Safety Programs & Risk Management

• Develop, implement, and maintain company safety programs, policies, and annual safety objectives supporting operations across all communities.
• Provide technical safety leadership and guidance to community leadership and Home Office teams.
• Maintain the Illness and Injury Prevention Program and lead safety initiatives addressing ergonomics, resident fall prevention, lockout procedures, SDS compliance, and other workplace hazards.
• Identify safety training needs and coordinate safety education programs across communities.
• Support appropriate selection and use of personal protective equipment (PPE).
• Monitor safety metrics, analyze injury trends, and prepare safety and incident reports to guide prevention efforts.
• Serve as a member of the Risk Management Steering Team and collaborate with community safety committees to strengthen safety accountability and culture.

Regulatory Compliance & Safety Oversight

• Monitor OSHA, NFPA, and other federal, state, and local safety regulations and communicate updates to communities and Home Office teams.
• Conduct safety audits and mock OSHA inspections to ensure compliance with company safety programs and regulatory requirements.
• Monitor OSHA 300 and 300A logs and train campus office managers on OSHA incident reporting procedures.
• Monitor lost-time injuries, illnesses, and workers’ compensation claims and support prevention efforts.
• Maintain the Hazard Communications Program and required OSHA safety documentation.
• Prepare OSHA and Department of Labor reporting and review safety inspections, committee reports, and incident investigations to ensure appropriate follow-up and corrective action.

Director of Risk and Safety (EHS / Safety & Compliance) Requirements:

• Bachelor’s degree in Safety, Risk Management, Occupational Health, or a related field preferred.
• 2–5 years of experience in safety management, risk management, regulatory compliance, or a related field.
• Experience supporting safety programs across multiple locations or departments is strongly preferred.
• Valid driver’s license with satisfactory driving record.
• Ability to travel regularly to company communities and Home Office.
• Ability to work effectively with regulatory agencies, consultants, and external partners.

Key Skills & Expertise

• Environmental Health & Safety (EHS), workplace safety program development, and regulatory compliance.
• Knowledge of OSHA, NFPA, and related workplace safety regulations.
• Safety audits, inspections, incident investigation, and injury trend analysis.
• Emergency preparedness planning and fire safety programs.
• Ability to influence leaders and support safety initiatives across multiple locations.
• Strong analytical, organizational, and problem-solving skills.
• Strong written and verbal communication skills with proficiency in Microsoft Office.

Our Investment in You:

• Above standard industry pay and comprehensive benefits including Highmark Blue Shield and employer-matching 401(k)
• Supplemental life insurance, company-paid short-term disability, and optional long- and short-term disability plans
• Generous paid time off, including holidays, your birthday, a Personal Day of Meaning, and the opportunity to roll over unused time
• Length of service bonus

Our Support for You:

• Family-owned, private company based in Hershey, PA
• Direct access to your supervisory team
• Incentivized career paths and tuition reimbursement
• On-the-job training and continuing education
• Employee Assistance Program for you and your family
• Co-worker Foundation (grants for times of need)
• Helping Hand interest-free loans

About Country Meadows

We have over 2500 co-workers who are serving our residents with meaning, thriving with purpose and leading our company with innovation! We have been serving seniors for over 35 years, and we invite you to join our vision for making lives better.

EOE

The Role

The Senior Project Manager (Mission Critical) is responsible for all project administration including all contractual requirements, agreements with trade partners, purchase orders, and risk management. This individual also manages general work performance and quality, and overall team progress against the project plan.

Budget Updates:

• Produce thorough forecast of Cost-to-Complete which drills down to identify potential exposures
• Coordinate the use of Oracle with Expedition to readily identify exposures
• Require the project team to track costs of field directives and back charges for forecasting purposes
• Create detailed analysis of line-item exposures, particularly unit price contracts
• Follow the Forecasting Calendar for on-time completion of forecasts
• Teach the Standard Operating Procedures for budget updating to others

Change Order Management:

• Require the project team to fully utilize Expedition to track all Proposed Change Order (PCO) items including in-scope and out-of-scope
• Provide the Owner with up-to-date status reports relating to Changes
• Require the project team to produce a monthly Owner Change Order (OCO) to prevent aging of PCO issues which further allows for timely closure of Changes with Subcontractors
• Work to recover all legitimate GC costs relating to Owner Changes
• Track the status of all Contract Allowances in Expedition and submits Change Order Requests (COR) when an over-run is likely
• Require the project team to track all field directives and back charges in Expedition for timely processing on a monthly basis, i.e. composite clean-up, hoisting time, etc.

Project Close Out:

• Establish an effective Close-out Plan early in the project which includes the early collection, review, and packaging of Contract close-out documents
• Implement the use of the Noncompliance Reporting System
• Require the team to utilize the Work list System to organize and manage the completion of phases of the work
• Utilize the Completion-Compliance-Quality Form (CCQ) process for close-out
• Teach close out process to other SCCI employees

Owner/Sub Requisition Process:

• Require the project team to have the completed pay requisitions approved by the Owner no later than the 1st of each month
• Produce an effective Schedule of Values
• Establish a regimented process for the collection of payments no later than 30 days and subsequent efficient system for the payment to Subcontractors
• Review the Hold Reports before payment is due to allow for timely handling of deficiency issues and payment to Subcontractors/Vendors

Cash Management:

• Consistently manage the cash flow of the Project to maintain a fiscally responsible position for SCCI
• Produce an effective Schedule of Values which supports a strong cash flow position
• Review each Subcontractors initial Schedule of Values to prevent overpayment
• Review Sub/Vendor requisitions to prevent payment of unsigned or unfunded Change Orders
• Produce and update the cash model for the Owner to prevent surprises
• Produce an accurate percent complete projection to support the SCCI financial management process

Meeting Management:

• Establishes a meeting regiment for the Project Team which provides for effective communication and problem solving
• Follow the SOP for focused meetings such as PM/PE, OAC's, subcontractor meetings, coordination meetings, Precon Sessions, etc.
• Manage all meetings by agenda and work to time limits

Contract Logs:

• Require the Project Team to assemble and maintain the Project Logs (Cash Management, Change Management, Noncompliance, Buy-Schedule, Contracts, Procurement, Submittals, RFI's, Safety, Hold Reports, Construction Schedule, Work lists) and periodically review for accuracy
• Conduct focus meetings once per month to review the maintenance of those logs and drills down to identify potential exposures and issues

Subcontractor Relationships:

• Establish a "Firm but Fair" approach to building relationships with Subcontractors
• Promote an environment of organization and professionalism with Subcontractors
• Address issues immediately with a non-performing Subcontractor to protect SCCI from resulting delay and potential impact

Exhibit B Purchasing Process:

• Work with the Project Team, including Superintendents and Estimators, to consistently produce clear, thorough, and accurate Scopes of Work based on drilled down review of documents
• Organize and administer a well-planned purchasing process to prevent the "Just in time" purchase of materials
• Understand the priority of timely buy-out and gather the resources to meet the buy schedule

Schedule Management:

• Provide leadership with the Superintendent to produce a clear, thorough, and accurate baseline Contract Schedule which rarely requires changes to the original logic
• Track events, impacts, and changes in the schedule to allow for the management and prevention of delays
• Lead the Project Team to focus on critical path matters to prevent non-excusable delays
• Manage and distribute organized and efficient Monthly Updating Process in accordance with the SCCI SOP
• Provide the Owner with written monthly updates of the Contract Schedule in accordance with the requirements of the Contract
• Take decisive action with subcontractors that are impacting the schedule
• Produce buy-out and procurement schedule and assist with writing monthly schedule narrative in conjunction with the Scheduling team

Risk Management:

• Complete the buy-out process in a manner which permits the timely flow of work, prevents budget issues, contract executions, bonds, insurance, etc.
• Write timely notices to Owner and Subcontractors
• Secure CCD authorizations before proceeding with Changes
• Take immediate action when a non-performing Subcontractor is likely to cause impact to the Project
• Work to complete the submittal and coordination process no later than 180 days
• Teaches a risk management regiment to others on the project team

Owner Relationship:

• Work to establish a trusting and professional relationship with the Owner
• Focus on keeping the Owner well informed of important matters to prevent surprises
• Work to secure a strong letter of recommendation from the Owner for SCCI

Quality Management:

• Provide leadership in the utilization of the Quality Management Program on the project, which outlines quality expectations
• Participate with the project team to institute the use of First Delivery and Quality Benchmark Inspections as the work progresses
• Implement the use of the Nonconformance Reporting System to track and manage deficiencies in the work
• Require the use of mock-ups to establish the quality expectations as defined in the Quality Management Program

Team Leadership:

• Strive to create synergy and a teamwork atmosphere on the project
• Lead by example by establishing the work ethic guidelines for the entire team and therefore establishes the boundaries and expectations
• Organize periodic team events and training sessions to advance the SCCI strategy of "Train & Develop Our People
• Act immediately when personal conflicts emerge among the team

Mentoring/Training:

• Oversee career and educational development of team personnel
• Require the adherence of standard operation procedures and actively teach each process

Qualifications

• Bachelor’s degree in applicable discipline and a minimum of 10 years of experience relative to project size and scope
• Excellent business judgment demonstrated by consistently achieving profitability objectives and strong project close-outs with client and subcontractor relationships in good standing
• Excellent organizational skills and attention to detail evidenced by a strong command of all applicable contract and legal provisions
• Ability to consistently analyze and execute financial trade-offs which frequently involve dealing with incomplete data and ambiguity
• Ability to constantly multi-task and handle competing priorities between Suffolk business needs, organizational issues, and sound customer relations
• Possess judgment to know when to appropriately escalate issues up the chain of command
• The ability to manage and embrace change. Respond and adapt to new processes and new ways of looking at old problems
• A strong sense of urgency and initiative. Able to quickly study and react to complex issues
• Excellent problem-solving skills and the ability to confidently and decisively take action
• Team leader with excellent diplomatic and communication skills, able to handle and resolve conflicts effectively in a firm but fair manner
• Candidate must possess Suffolk’s Core Values: Passion, Integrity, Hard Work, Professionalism, and Caring

Working Conditions

While performing the duties of this job, the employee is regularly required to sit for long periods of time; talk or hear; perform fine motor, hand and finger skills in the use of a keyboard, telephone, or writing. The employee is frequently required to stand; walk; and reach with arms and/or hands. Specific vision abilities include close vision, distance vision, depth perception and the ability to adjust focus. The employee will spend their time in an office environment with a quiet to moderate noise level. Job site walking.

EEO Statement

Suffolk provides equal employment opportunities to all employees and applicants for employment without regard to race, color, religion, sex, sexual orientation, pregnancy or maternity, national origin, citizenship, genetic information, disability, protected veteran, gender identity, age or any other status protected by law. This policy applies to recruiting, hiring, transfers, promotions, terminations, compensation, benefits, and all other terms and conditions of employment. Suffolk will not tolerate any unlawful discrimination toward, or harassment of, applicants or employees by anyone at Suffolk, or anyone working on behalf of Suffolk.

Suffolk is a national enterprise that builds, innovates, and invests. We provide value across the entire project lifecycle through our core construction management services and complementary business lines in real estate investment, design, self-perform construction, and technology start-up investment (Suffolk Technologies). By integrating data, artificial intelligence, and advanced technology through our Seamless Platform, we connect design, construction, and operations to deliver smarter, more predictable results and redefine how America builds.

Suffolk – America’s Contractor – is a national company with more than $8 billion in annual revenue, 3,000 employees, and 17 offices, including Boston (headquarters), New York City, Miami, West Palm Beach, Tampa, Estero, Dallas, Los Angeles, San Francisco, San Diego, Las Vegas, Herndon, U.S. Virgin Islands, and other key markets. Suffolk manages some of the most complex and transformative projects in the country, serving clients across healthcare, life sciences, education, gaming, aviation, transportation, government, mission critical, and commercial sectors. Suffolk is privately held and is led by founder, chairman and CEO John Fish. Suffolk is ranked #8 on ENR’s list of “Top CM-at-Risk Contractors.” For more information, visit and follow Suffolk on Facebook, Twitter, LinkedIn, YouTube, and Instagram.

The Role:

The Senior Project Manager is responsible for all project administration including all contractual requirements, agreements with trade partners, purchase orders, and risk management. This individual also manages general work performance and quality, and overall team progress against the project plan.

Responsibilities:

Budget Updates:

• Produce thorough forecast of Cost-to-Complete which drills down to identify potential exposures
• Coordinate the use of Oracle with Expedition to readily identify exposures
• Require the project team to track costs of field directives and back charges for forecasting purposes
• Create detailed analysis of line-item exposures, particularly unit price contracts
• Follow the Forecasting Calendar for on-time completion of forecasts
• Teach the Standard Operating Procedures for budget updating to others

Change Order Management:

• Require the project team to fully utilize Expedition to track all Proposed Change Order (PCO) items including in-scope and out-of-scope
• Provide the Owner with up-to-date status reports relating to Changes
• Require the project team to produce a monthly Owner Change Order (OCO) to prevent aging of PCO issues which further allows for timely closure of Changes with Subcontractors
• Work to recover all legitimate GC costs relating to Owner Changes
• Track the status of all Contract Allowances in Expedition and submits Change Order Requests (COR) when an over-run is likely
• Require the project team to track all field directives and back charges in Expedition for timely processing on a monthly basis, i.e. composite clean-up, hoisting time, etc.

Project Close Out:

• Establish an effective Close-out Plan early in the project which includes the early collection, review, and packaging of Contract close-out documents
• Implement the use of the Noncompliance Reporting System
• Require the team to utilize the Work list System to organize and manage the completion of phases of the work
• Utilize the Completion-Compliance-Quality Form (CCQ) process for close-out
• Teach close out process to other SCCI employees

Owner/Sub Requisition Process:

• Require the project team to have the completed pay requisitions approved by the Owner no later than the 1st of each month
• Produce an effective Schedule of Values
• Establish a regimented process for the collection of payments no later than 30 days and subsequent efficient system for the payment to Subcontractors
• Review the Hold Reports before payment is due to allow for timely handling of deficiency issues and payment to Subcontractors/Vendors

Cash Management:

• Consistently manage the cash flow of the Project to maintain a fiscally responsible position for SCCI
• Produce an effective Schedule of Values which supports a strong cash flow position
• Review each Subcontractors initial Schedule of Values to prevent overpayment
• Review Sub/Vendor requisitions to prevent payment of unsigned or unfunded Change Orders
• Produce and update the cash model for the Owner to prevent surprises
• Produce an accurate percent complete projection to support the SCCI financial management process

Meeting Management:

• Establishes a meeting regiment for the Project Team which provides for effective communication and problem solving
• Follow the SOP for focused meetings such as PM/PE, OAC's, subcontractor meetings, coordination meetings, Precon Sessions, etc.
• Manage all meetings by agenda and work to time limits

Contract Logs:

• Require the Project Team to assemble and maintain the Project Logs (Cash Management, Change Management, Noncompliance, Buy-Schedule, Contracts, Procurement, Submittals, RFI's, Safety, Hold Reports, Construction Schedule, Work lists) and periodically review for accuracy
• Conduct focus meetings once per month to review the maintenance of those logs and drills down to identify potential exposures and issues

Subcontractor Relationships:

• Establish a "Firm but Fair" approach to building relationships with Subcontractors
• Promote an environment of organization and professionalism with Subcontractors
• Address issues immediately with a non-performing Subcontractor to protect SCCI from resulting delay and potential impact

Exhibit B Purchasing Process:

• Work with the Project Team, including Superintendents and Estimators, to consistently produce clear, thorough, and accurate Scopes of Work based on drilled down review of documents
• Organize and administer a well-planned purchasing process to prevent the "Just in time" purchase of materials
• Understand the priority of timely buy-out and gather the resources to meet the buy schedule

Schedule Management:

• Provide leadership with the Superintendent to produce a clear, thorough, and accurate baseline Contract Schedule which rarely requires changes to the original logic
• Track events, impacts, and changes in the schedule to allow for the management and prevention of delays
• Lead the Project Team to focus on critical path matters to prevent non-excusable delays
• Manage and distribute organized and efficient Monthly Updating Process in accordance with the SCCI SOP
• Provide the Owner with written monthly updates of the Contract Schedule in accordance with the requirements of the Contract

Risk Management:

• Complete the buy-out process in a manner which permits the timely flow of work, prevents budget issues, contract executions, bonds, insurance, etc.
• Write timely notices to Owner and Subcontractors
• Secure CCD authorizations before proceeding with Changes
• Take immediate action when a non-performing Subcontractor is likely to cause impact to the Project
• Work to complete the submittal and coordination process no later than 180 days
• Teaches a risk management regiment to others on the project team

Owner Relationship:

• Work to establish a trusting and professional relationship with the Owner
• Focus on keeping the Owner well informed of important matters to prevent surprises
• Work to secure a strong letter of recommendation from the Owner for SCCI

Qualifications:

• Bachelor’s degree in applicable discipline and a minimum of 10 years of experience relative to project size and scope
• Excellent business judgment demonstrated by consistently achieving profitability objectives and strong project close-outs with client and subcontractor relationships in good standing
• Excellent organizational skills and attention to detail evidenced by a strong command of all applicable contract and legal provisions
• Ability to consistently analyze and execute financial trade-offs which frequently involve dealing with incomplete data and ambiguity
• Ability to constantly multi-task and handle competing priorities between Suffolk business needs, organizational issues, and sound customer relations
• Possess judgment to know when to appropriately escalate issues up the chain of command
• The ability to manage and embrace change. Respond and adapt to new processes and new ways of looking at old problems
• A strong sense of urgency and initiative. Able to quickly study and react to complex issues
• Excellent problem-solving skills and the ability to confidently and decisively take action
• Team leader with excellent diplomatic and communication skills, able to handle and resolve conflicts effectively in a firm but fair manner
• Candidate must possess Suffolk’s Core Values: Passion, Integrity, Hard Work, Professionalism, and Caring

While performing the duties of this job, the employee is regularly required to sit for long periods of time; talk or hear; perform fine motor, hand and finger skills in the use of a keyboard, telephone, or writing. The employee is frequently required to stands; walk; and reach with arms and/or hands. Specific vision abilities include close vision, distance vision, depth perception and the ability to adjust focus. The employee will spend their time in an office environment with a quiet to moderate noise level. Job site walking.

Suffolk provides equal employment opportunities to all employees and applicants for employment without regard to race, color, religion, sex, sexual orientation, pregnancy or maternity, national origin, citizenship, genetic information, disability, protected veteran, gender identity, age or any other status protected by law. This policy applies to recruiting, hiring, transfers, promotions, terminations, compensation, benefits, and all other terms and conditions of employment. Suffolk will not tolerate any unlawful discrimination toward, or harassment of, applicants or employees by anyone at Suffolk, or anyone working on behalf of Suffolk.

Job Description

NEW OPPORTUNITY for an Electrical Assembly Intern at Gratz Operations!

Assist and support the current Assembly team with electrical assembly projects, while learning and gaining experience in electrical machine design, machine testing, and/or machine controls. This position is one that understands how to read electrical schematics and can assist in properly building panels, routing, and terminating wires for complete machines. The ability to operate manual and powered hand tools, such as drills, grinders, and sanders is desired. This position is under the supervision of the Assembly Team and Electrical Engineers. 

DUTIES AND RESPONSIBILITIES:

· Responsible for assisting higher-level Assemblers and Engineers in electrical panel builds.

· Read and understand assembly drawings, electrical schematics, and assembly instructions.

· Follow standard assembly procedures and adhere to pre-determined best assembly practices.

· Hand drill, ream, and tap holes for wire hold downs as needed.

· Layout and build electrical panels working off drawings and schematics.

· Properly label all wires according to electrical prints and schematics, and verbal instructions.

· Route and terminate wires according to electrical prints and schematics and verbal instructions.

· Work with engineers in the testing of electrical panels and machines.

· Work with a cooperative team when necessary.

· Ability to follow instructions without constant supervision.

· Maintain a safe and clean workstation while having a safety-conscious mindset.

· Working with Engineers and the manufacturing team improves the manufacturability of machinery.

· Prioritize workload to ensure that deliverables are completed in timelines that meet customer expectations

· Performs other Duties as assigned.

QUALIFICATIONS, SKILLS, AND ABILITIES:

· Minimum 1 year of experience in Hands-on electrical machine assembly, panel building, electrical maintenance role, or other electric work. An equivalent combination of experience and education to successfully perform the essential functions of the position will also be considered.

· Able to read and understand engineering assembly drawings, instructions, schematics, and prints.

· Basic electrical machine systems understanding required.

· Basic Understanding of stop/safety controls and safety interlocks required.

· Ability to interface with individuals with diverse backgrounds at varying levels of the organization.

· Fluent in Microsoft Office products (Excel, Word, PowerPoint, etc.) desired.

· Strong passion, high energy, and enthusiasm for growth.

· Strong communication skills and detail-oriented.

· Strong time management, organizational skills, and ability to set priorities for multiple tasks.

· Ability to work in a production environment, if required.

· Ability to self-start and work independently.

What We Offer

Our benefits package includes coverage of your health, wealth, and wellness for you and your eligible spouse/dependents. We offer a competitive salary and benefits package, including a 401k with company match and generous paid time off to help you balance your life. Below is a list of benefits you will enjoy while working with our company.

- Three comprehensive Medical plan options

Prescription

Dental

Vision

- Company Paid Life Insurance

- Voluntary Life Insurance

- Supplemental Hospital Indemnity, Critical Illness, and Accident Insurance

- Company-paid Short-Term Disability

- Company-paid Long-Term Disability

- Paid time off (PTO) and paid Holidays

- 401k retirement plan with company match

- Employee Assistance Program

- Teladoc

- Legal Insurance

- Identity Theft Protection

- Pet Insurance

- Team Member Discount Program

- Tuition Reimbursement

- Yearly Wellness Clinic

MITER Brands, also known as MI Windows and Doors, Milgard and PGT Industries are an equal-opportunity employer. The company does not discriminate based on religion, race, creed, color, national origin, sex, age, disability, handicap, veteran status, sexual orientation, genetic information, or any other applicable legally protected category.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for an Integral Fuel Cell Assembly (In- Tank Mechanic) to join our Join and Installation team in Everett and Renton, Washington. 

As an Integral Fuel Cell Assembly (In-Tank Mechanic), you will play a vital role in ensuring the highest standards of quality and safety while working within the confined spaces of aircraft fuel tanks. This position requires assembling and installing structural components, systems, and sub-assemblies to meet stringent quality requirements. You will be responsible for verifying kitted parts, performing drilling, riveting, and bonding, as well as assembling plumbing and electrical systems within the tank. Your attention to detail will be crucial as you conduct continuity checks, perform necessary rework, and ensure that all installations comply with specifications. Please note that this role involves working in tight spaces, including entering the wing through a approximately 9.5" x 17.7" opening; therefore, comfort with confined spaces is essential for success in this position.  

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation. 

Position Responsibilities: 

• Assemble and install parts, structural components, systems, and sub-assemblies to meet quality requirements for wing and horizontal stabilizer assemblies. 

• Review bar charts or automated timelines to determine job assignments and obtain necessary drawings. 

• Locate work areas using drawings, installation plans, or other paperwork that specifies airplane and section numbers. 

• Obtain and verify kitted parts against installation plans and bill of materials to ensure they are correct and free of defects. 

• Retrieve parts from the Parts Control Area or other designated locations if they are not pre-picked, ensuring they meet specifications. 

• Obtain a two-way radio and confined space flag before working in confined spaces, adhering to Communications System for Confined Hazardous Areas (CSCHA) rules and regulations. 

• Perform drilling, reaming, riveting, cold working, bonding, grounding, and sealing as necessary to complete work assignments. 

• Assemble and install aircraft plumbing and electrical systems within closed areas of the wing and horizontal stabilizer, ensuring compliance with specifications. 

• Perform pickup and rework, incorporating changes and conducting functional checks on work typically installed by lower classifications. 

• Perform continuity checks for electrical systems and hand form electrical wiring and soldering as necessary for work assignments.

• Perform final cleaning and closing of fuel cells, including vacuuming and installing fuel cell doors. 

• Locate and pre-install routing and clamping hardware for in-wing fuel tank electrical and plumbing systems as required. 

• Use precision measuring instruments to verify that quality standards are achieved. 

• Report job handicaps, such as errors in sequencing, parts, materials, and assembly procedures, following shop procedures. 

• Check work after completion of each operation to ensure assembly is complete and free of defects and remove and replace installations and related components as necessary. 

Physical Demands and Potential Hazards: 

• Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs. 

• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting. 

• Work in environments that may involve contact with metals, solvents, and coolants. 

• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards. 

• Adapt to varying noise levels and atmospheric conditions. 

• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options. 

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee 

Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered. 

Aerospace Technician and Mechanic Aptitude Virtual Job Tryout: To be considered for this position you will be required to complete a technical assessment as part of the selection process.  Failure to complete the assessment will remove you from consideration. 

Basic Qualifications (Required Skills/Experience):  

• 1+ years of structural experience in aerospace, automotive, maritime, construction or similar industry; this can include education and military.

• 1+ years experience following oral and written instructions in the form of blueprints, drawings, work instructions.

• 1+ years of experience using high impact vibratory tools; such as bucking/riveting. 

• Ability to stand 6-8 hours per day; walk constantly; climb or work from stairs/steps/ladders; bend and twist frequently; squat and kneel; wear hearing protection (ear inserts, canal caps, earmuffs); eye protection, and use hazardous chemicals.

• Ability to lift up to 35lbs.

• Ability to work in Confined Spaces (work within or pass through). Entry diameter 9.5”X17.7”.

• Proficiency in reading, writing, and speaking English.

Preferred Qualifications:  

• 1+ years of experience performing aircraft structural work or equivalate.

• Enrolled in a Boeing partnered manufacturing related high school or community and technology college academic program.

Typical Education & Experience:  

High school graduate or GED preferred. 

Relocation: 

This position offers relocation based on candidate eligibility. 

Drug Free Workplace: 

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. 

Union Representation Statement:  

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement. 

Shift:  

This position is for a variety of shifts.  

Total Rewards & Pay Transparency: 

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.  Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.    

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.    

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.  

Pay is based upon candidate experience and qualifications, as well as market and business considerations.    

Pay: $26.32/hour, with potential to earn up to $56.36/hour in accordance with the terms of the relevant collective bargaining agreement.

Applications for this position will be accepted until Apr. 10, 2026

Language Requirements

English Preferred

Relocation

This position offers relocation based on candidate eligibility.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

At TDS Telecom, connecting people is at the heart of everything we do. We are forward thinkers who leverage cutting-edge fiber internet technology to strengthen communities. We are dedicated to excellence, which drives us to succeed together, creating a better world through meaningful connections. Ready to make an impact?

Join our Internal Constrcution Crew (ICC) in Delavan, WI!

The Fiber Construction Technician performs the general labor associated with outside plant construction for PON/fiber optic networks. This includes, but is not limited to, assisting with the installation of communications facilities (both buried and aerial). Work is performed in accordance with state and local regulations in a safe manner.

This position is eligible for a $1,000 sign-on bonus! (Payout terms apply)

Training:

As a Fiber Construction Technician, you will have the opportunity to obtain a Class A CDL through our in-house training program. You will attend safety training at one of our new facilities where you will also be trained on Pole Climbing and Bucket Trucks. On-the-job training includes exposure to various construction equipment including Directional Drill Rigs, Mini Excavators, Trenchers, and Locators. Fiber optic training includes Fusion Splicing, Fault Detection, and exposure to OTDRs and other advanced testing equipment.

The duration of training varies based on the team assignment. Training for underground teams is 3 weeks, with an additional 1 week required for aerial training. Depending on factors such as market needs, prior skills, and team size, some individuals may only complete underground training, while others may undergo the full 4-week program, including aerial training.

**This position may be eligible for relocation assistance.  For further information, please contact the Talent Acquisition team.**

• Performs general construction labor in various weather conditions while utilizing safety fundamentals.
  • Assists with and performs the transportation of required construction equipment to and from the worksite.
  • Assists with and performs the placement of new aerial and buried fiber according to maps, staking sheets, and locate markings.
  • Uses hand tools, cable locators, and test equipment.
  • Installs and/or sets enclosures (buried and aerial) vaults, pedestals, and handholes.
  • Climbs poles, ladders, towers, and other structures as needed; uses bucket truck when required.
  • Marks/labels fiber optic and/or copper facilities.
  • Uses dispatching application and associated tools.
  • Assists with fiber splicing and repairs.
  • Assists with outside plant preventative maintenance.
• Services, cleans, maintains, and repairs equipment.
• Completes all related paperwork in a timely manner.
• Provides assistance to field services technicians, as needed.

Required Qualifications

• 6+ months experience in any combination of the following areas: customer service, electrical or utility construction, -OR-technical certification (or higher) -OR- current military service, or prior military service with honorable discharge.
• Must follow the TDS attendance guidelines in order to meet TDS’s business needs including but not limited to our obligations to our customers and to our customers’ needs.
• Must have and maintain a valid driver’s license and remain eligible for DOT requirements.

Other Qualifications

• Must have the ability to obtain a Class A CDL. A current CDL is preferred at hire, but TDS will train and certify eligible associates through its in-house CDL certification program after hire.
• Physical requirements may vary based on company needs: Ability to climb poles, ladders, towers, and other structures as needed. Ability to kneel, dig, lift, and pull.
• Upon hire, must successfully pass all components of the Safety Training course curriculum.
• Upon hire, must successfully complete customer-specific requirements, which may include a background check administered by the customer.
• Horizontal directional drilling experience preferred.
• Basic understanding of telecommunication products and services.
• Proven organizational skills and ability to multi-task.
• May require occasional travel.
• Must be willing to work overtime as needed. May be required to work various/swing shifts as business needs dictate.
• Must be able to operate vehicles with manual transmissions.

Do you meet the Required Qualifications but are unsure if your experience aligns with the Other Qualifications? We encourage you to apply! Research shows that many candidates hesitate to apply unless they meet 100% of the qualifications, even when they possess the skills and experience needed to succeed in the role. Experience and skills come in many forms, and they may not always match exactly what’s listed on paper, but they can still lead to success. If you meet the Required Qualifications and believe you have the potential to thrive in this role, we encourage you to apply today!

Physical Demands and Work Environment

This role involves frequent physical activity, including standing, walking, kneeling, climbing, and lifting up to 50 pounds regularly (occasionally over 100 pounds). Vision requirements include close, distance, color, and depth perception.

Work conditions often include outdoor weather, attics, crawl spaces, and high-risk areas like high voltage zones, trenches, and manholes. Exposure to heavy equipment, fumes, vibration, extreme temperatures, and loud noise is common.

Benefits

We believe in taking care of our team, which is why we offer comprehensive benefits to support your health, financial well-being, and overall happiness. Join us and experience a work environment where your well-being is a top priority!

Associates scheduled to work 20 or more hours per week have access to:

• Medical Coverage
• Dental Coverage
• Vision Coverage
• Life Insurance
• 401(k) Plan
• Generous Vacation & Paid Sick Leave
• Seven Paid National Holidays & One Floating Holiday
• Paid Parental Leave (6 weeks after 12 months of employment)
• Adoption & Surrogacy Assistance
• Employee Assistance & Wellness Programs 

Associates working 30 or more hours per week additionally have access to:

• Short-Term & Long-Term Disability
• TDS Service Discounts
• Education Assistance
• Paid Volunteer Time 

In addition to these benefits, all associates will have the opportunity to participate in our Associate Resource Groups, which are designed to encourage community and facilitate professional development. To learn more, click here.

Who is TDS Telecom?

TDS Telecom provides high-speed internet, TV entertainment, and phone services to a diverse range of communities, including small to mid-sized urban, suburban, and rural areas across the U.S. With over 50 years of experience, TDS is committed to building and expanding fiber optic networks that bring cutting-edge connectivity to neighborhoods nationwide. Serving over 1 million connections, our mission is to create a better world by delivering innovative communication solutions that enhance the way people live, work, and connect. Visit  to learn more! 

At TDS, we are committed to Equal Employment Opportunity (EEO) and value the difference of backgrounds, experiences and perspectives in our workforce. We consider all qualified applicants without regard to race, color, age, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or any other status protected by law.

Pay Transparency

The pay for this position ranges from *$22.62 to $41.42 per hour.

*The listed pay range reflects the minimum and maximum base salary. Actual offers will be based on factors such as skills, qualifications, experience, location, and role-specific competencies. Some positions may also offer additional compensation, such as bonuses or equity awards.

Structural Mechanic IV in GAC Brunswick

Unique Skills:

At Gulfstream, our people are at the heart of everything we do. We believe in inspiring and empowering every individual to reach their fullest potential. From workforce development and meaningful connections to a culture of trust, respect, and integrity, we invest in our employees so they can do their best work and achieve success together. Creating and delivering the world's finest aviation experience starts with our people and when our people thrive, so does our mission.

Blueprint reading, process code and fabrication experience, airframe structures and repair work required.

1. Use ability as a skilled specialist to contribute to the development of employees and techniques and completes work in innovative and effective ways .
2. Perform assembly and fitting of detail parts and structures and varied drilling and riveting operations; ensures parts/assembly meet requirements .
3. Use complicated schematics/blueprints, engineering drawings and technical instructions to safely perform layout, fabrication, and installation of parts, equipment or fabricated items on aircraft. Coordinate with supervision and Inspection to ensure compliance with internal and FAA paperwork, sign-offs and quality specifications .
4. Ability to move to new tasks with minimal, short-term impact to established goal hours and schedule .
5. Rivet structural assemblies and parts using all tools required. to do the job (e.g. portable riveting guns, pneumatic drills, counter sinks, rivet shavers, files, reamers, rivets). Must display the ability to remove fasteners without damaging structures .
6. Read work orders, blueprints, lofts, sketches, and operation sheets to determine sequence of operations, type size for rivets, hole pattern for rivets, cutand form plastics and follow standard operating procedures when using adhesives, sealants and solvents .
7. Check all work and ensure a defect free assembly prior to final inspection .
8. Mentor, train, and assist other team members in interpretation of blueprints, drawings, and engineering orders; develop methods and shop aids to resolve production installation difficulties and problems .
9. Maintain and use all logs and records (e.g. MIR sheets, DMTs, Crabs, PCOs) .
10. Align and assembles parts to be riveted using jigs, holding fixtures, pins, clamps, and fasteners .
11. Make repairs per Discrepant Material Tags (DMT), Material Review Request (MRR), Production Change Orders (PCO), performs necessary rework to ensure installations meet conformity .
12. Plan and organize workloads and resource requirements to meet or exceed goal hours and schedule expectations. Assist in overseeing projects or other technicians and assesses requirements of assigned tasks to procure required. materials and documentation for assigned tasks .
13. Maintain a neat and orderly work area, supports the company 5S, Lean Initiative Program, and complies with all safety regulations .
14. Support Lean Activities, comply with all safety, 5S, and housekeeping policies.

1. Good working knowledge of computers and related software.
2. Must be able to read and interpret blue prints.
3. Must be skilled in close tolerance work and have knowledge of use of special tools and equipment. Should be able to use all tools required. to do the job.
4. Must be able to use mathematical formulas by solving dimensional problems using fractions, decimal fractions and whole numbers.
5. Thorough knowledge in the use of multiple measuring devices, demonstrated ability to use within specified tolerance.
6. Must be able to work any shift.
7. Must be able to lift 50 lbs.
8. Must be able to climb ladders, stands, stairs and work in small spaces and/or restricted areas.
9. Must be able to read, write, speak, and understand the English language.

Additional Information

Requisition Number: 231359

Category: Operations

Percentage of Travel: Up to 25%

Shift: Multiple Shifts

Employment Type: Full-time

Posting End Date: 03/23/2026

Equal Opportunity Employer / Individuals with Disabilities / Protected Veterans

Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.

Legal Information Site Utilities Contacts Sitemap
Copyright 2025 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company .

Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft

Structural Mechanic 2 in GAC St. Louis

Unique Skills:

At Gulfstream, our people are at the heart of everything we do. We believe in inspiring and empowering every individual to reach their fullest potential. From workforce development and meaningful connections to a culture of trust, respect, and integrity, we invest in our employees so they can do their best work and achieve success together. Creating and delivering the world's finest aviation experience starts with our people and when our people thrive, so does our mission.

Employee needs to be skilled in sheet metal structures and repairs.

The compensation range for this role is $26.51 - $30.93 per hour.

Final compensation for this role will be determined by several factors including but not limited to: minimum and preferred qualifications, knowledge, skills, abilities, education, experience, and location.

Gulfstream employees benefit from a total rewards package that includes competitive compensation, comprehensive benefits plans, wellness programs, paid leave and tuition assistance. Our U.S. benefits package includes:

• Medical, prescription, dental and vision coverage
• Life and disability insurance
• Retirement savings plan
• Employee assistance plan
• Voluntary programs such as adoption assistance, prepaid legal assistance, home and auto insurance, and accident insurance.

1. Safely perform assembly and fitting of detail parts and structures and varied drilling and riveting operations; ensures parts/assembly meet requirements Safely perform sheetmetal layout, fabrication, and installation of parts, equipment or fabricated items on aircraft .
2. Rivet structural assemblies and parts using all tools required. to do the job (e.g. portable riveting guns, pneumatic guns, pneumatic drills, counter sinks, rivet shavers, files, reamers, rivets). Must display the ability to remove fasteners without damaging structure .
3. Read work orders, blueprints, lofts, sketches and operation sheets to determine sequence of operations, type size and hole pattern for rivets, cut and form plastics and follow standard operating procedures when using adhesives, sealants, and solvents .
4. Check all work and ensure a defective free assembly prior to final inspection .
5. Maintain and use all logs and records (e.g. MIR sheets, DMTs, Crabs, PCOs) .
6. Align and assemble parts to be riveted using jigs, holding fixtures, pins, clamps, and fasteners. Utilizing proper tooling, shape and form complex angles and configurations according to blueprint specifications or written/verbal information .
7. Make repairs per Discrepant Material Tags (DMT), Material Review Request (MRR), Production Change Orders (PCO), performs necessary rework to ensure installations meet conformity .
8. Maintain a neat and orderly work area, supports the company 5S Program, and complies with all safety regulations. Use personal protective equipment as required.
9. Able to work with minimal supervision on duties and tasks .
10. Participate in continuous improvement activities (e.g. YIAW, Kaizen events, etc.) .
11. Properly use and maintain company-provided tools and equipment and returns items to tool room after use .
12. Ensure standard operating procedures are followed when operating ground support equipment .

1. Properly collect and dispose of waste fuel, oil, hydraulic fluids, de-icing fluids, and solvent rags .
2. Ensure accurate daily job charging to the aircraft .
3. Exchange job related information and coordinate work activities between shifts through turn over report meetings and direct contact with leadership .
4. Assist in maintaining shop equipment and associated JSAs .
5. Support Lean Activities .

1. Must be able to read and interpret blue prints.
2. Basic computer skills and basic shop math skills.
3. Must be able to read a scale and perform basic shop math.
4. Read and comprehend basic documents and instructions.
5. Must have essential personal skills, which include an aptitude for hands-on craftwork, a professional attitude, attention to detail, ability to work with people and to meet demanding schedules.
6. Must demonstrate good housekeeping and safety practices.
7. Ability to work with composite resins and materials.
8. Must be able to work any shift.
9. Must be able to climb ladders/stands/stairs and work in small spaces or restricted areas & lift 50 lbs.
10. Must be able to read, write, speak, and understand the English language.

Additional Information

Requisition Number: 231417

Category: Operations

Percentage of Travel: Up to 25%

Shift: First

Employment Type: Full-time

Posting End Date: 04/03/2026

Equal Opportunity Employer / Individuals with Disabilities / Protected Veterans

Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.

Legal Information Site Utilities Contacts Sitemap
Copyright 2025 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company .

Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft

SkillBridge Structural Mechanic in N/A

Unique Skills:

At Gulfstream, our people are at the heart of everything we do. We believe in inspiring and empowering every individual to reach their fullest potential. From workforce development and meaningful connections to a culture of trust, respect, and integrity, we invest in our employees so they can do their best work and achieve success together. Creating and delivering the world's finest aviation experience starts with our people and when our people thrive, so does our mission.

Must be eligible for the DOD SkillBridge Program.

You may be eligible to participate in SkillBridge if you: Have 180 days of service or fewer remaining prior to your date of discharge and you have at least 180 continuous days of active Military service. Obtain approval from your unit commander. Agree that participation in the DOD SkillBridge can be terminated at any time by the service if mission requirements dictate.

Education and Experience Requirements

SkillBridge Structural Mech II- 2 years related structural assembly experience.

SkillBridge Structural Mech III- 4 years related structural assembly experience.

SkillBridge Structural Mech IV - 6 years related structural assembly experience.

1. Safely perform assembly and fitting of detail parts and structures and varied drilling and riveting operations; ensures parts/assembly meet requirements. Safely perform sheetmetal layout, fabrication, and installation of parts, equipment or fabricated items on aircraft .
2. Rivet structural assemblies and parts using all tools required. to do the job (e.g. portable riveting guns, pneumatic guns, pneumatic drills, counter sinks, rivet shavers, files, reamers, rivets). Must display the ability to remove fasteners without damaging structure .
3. Read work orders, blueprints, lofts, sketches and operation sheets to determine sequence of operations, type size and hole pattern for rivets, cut and form plastics and follow standard operating procedures when using adhesives, sealants, and solvents .
4. Check all work and ensure a defective free assembly prior to final inspection .
5. Maintain and use all logs and records (e.g. MIR sheets, DMTs, Crabs, PCOs) .
6. Align and assemble parts to be riveted using jigs, holding fixtures, pins, clamps, and fasteners. Utilizing proper tooling, shape and form complex angles and configurations according to blueprint specifications or written/verbal information .
7. Make repairs per Discrepant Material Tags (DMT), Material Review Request (MRR), Production Change Orders (PCO), performs necessary rework to ensure installations meet conformity .
8. Maintain a neat and orderly work area, supports the company 5S Program, and complies with all safety regulations. Use personal protective equipment as required.

1. Properly collect and dispose of waste fuel, oil, hydraulic fluids, de-icing fluids, and solvent rags .
2. Ensure accurate daily job charging to the aircraft .
3. Exchange job related information and coordinate work activities between shifts through turn over report meetings and direct contact with leadership .
4. Assist in maintaining shop equipment and associated JSAs .
5. Support Lean Activities .

1. Must be able to read and interpret blue prints.
2. Basic computer skills and basic shop math skills.
3. Must be able to read a scale and perform basic shop math.
4. Read and comprehend basic documents and instructions.
5. Must have essential personal skills, which include an aptitude for hands-on craftwork, a professional attitude, attention to detail, ability to work with people and to meet demanding schedules.
6. Must demonstrate good housekeeping and safety practices.
7. Ability to work with composite resins and materials.
8. Must be able to work any shift.
9. Must be able to climb ladders/stands/stairs and work in small spaces or restricted areas & lift 50 lbs.
10. Must be able to read, write, speak, and understand the English language.

Additional Information

Requisition Number: 230675

Category: Operations

Percentage of Travel: Up to 25%

Shift: Multiple Shifts

Employment Type: Skillbridge

Posting End Date: 09/27/2025

Equal Opportunity Employer / Individuals with Disabilities / Protected Veterans

Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.

Legal Information Site Utilities Contacts Sitemap
Copyright 2025 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company .

Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft

Structural Mechanic III - Sign On Bonus Available in GAC Mesa

Unique Skills:

At Gulfstream, our people are at the heart of everything we do. We believe in inspiring and empowering every individual to reach their fullest potential. From workforce development and meaningful connections to a culture of trust, respect, and integrity, we invest in our employees so they can do their best work and achieve success together. Creating and delivering the world's finest aviation experience starts with our people and when our people thrive, so does our mission.

Heavy structures MOD experience preferred.

1. Safely perform assembly and fitting of detail parts and structures and varied drilling and riveting operations; ensures parts/assembly meet requirements. Safely perform sheetmetal layout, fabrication, and installation of parts, equipment or fabricated items on aircraft .
2. Possess the proven ability to move to new tasks with only a moderate, short-term impact to established goal hours and schedule .
3. Rivet structural members, assemblies and parts using all tools required. to do the job (e.g. portable riveting guns, pneumatic drills, counter sinks, rivet shavers, files, reamers, rivets). Ability to remove fasteners without damaging structures .
4. Read work orders, blueprints, lofts, sketches, and operation sheets to determine sequence of operations, type size and hole pattern for rivets, cut and form plastics and follow standard operating procedures when using adhesives, sealants, and solvents .
5. Check all work and ensure a defective free assembly prior to final inspection .
6. Instruct and assist other team members in interpretation of blueprints, drawings, and engineering orders; develop methods and shop aids to resolve production installation difficulties and problems .
7. Maintain and use all logs and records (e.g. MIR sheets, DMTs, Crabs, PCOs) .
8. Align and assemble parts to be riveted using jigs, holding fixtures, pins, clamps, and fasteners. Utilizing proper tooling, shape and form complex angles and configurations according to blueprint specifications or written/verbal information .
9. Make repairs per Discrepant Material Tags (DMT), Material Review Request (MRR), Production Change Orders (PCO), performs necessary rework to ensure installations meet conformity .
10. Maintain a neat and orderly work area, supports the company 5S & Lean Initiative Program and complies with all safety regulations. Use of personal protective equipment as required.

1. Participate in continuous improvement activities .
2. Properly use and maintain company-provided tools and equipment and returns items to tool room after use .
3. Ensure standard operating procedures are followed when operating ground support equipment .
4. Properly collect and dispose of waste fuel, oil, hydraulic fluids, de-icing fluids, and solvent rags .
5. Ensure accurate daily job charging to the aircraft .
6. Exchange job related information and coordinate work activities between shifts through turn over report meetings and direct contact with leadership .

1. Basic computer and basic shop math skills.
2. Read and comprehend basic documents and instructions and read a scale.
3. Must have essential personal skills and possess aptitude for hands-on craftswork, a professional attitude, attention to detail, ability to work with people and to meet demanding schedules.
4. Must be skilled in close tolerance work and have knowledge of use of special tools and equipment.
5. Ability to work with composite resins and materials.
6. Must be able to work any shift.
7. Must be able to climb ladders, stands, stairs, and work in small spaces or restricted areas & lift 50 lbs.

Additional Information

Requisition Number: 230580

Category: Operations

Percentage of Travel: Up to 25%

Shift: Multiple Shifts

Employment Type: Full-time

Posting End Date: 04/30/2026

Equal Opportunity Employer / Individuals with Disabilities / Protected Veterans

Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.

Legal Information Site Utilities Contacts Sitemap
Copyright 2025 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company .

Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft