Logical Fallacies Definition Simple Jobs in Usa

Date Posted:

Country:

Location:

Position Role Type:

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Security Clearance Type:

Security Clearance Status:

At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today's mission and stay ahead of tomorrow's threat. Our team solves tough, meaningful problems that create a safer, more secure world.

The Effector Analog and Power Department is responsible for the development, from concept to integration, of Telemetry and Flight Termination products; power systems from all up round to the lowest level power regulation; servo electronics supporting all mechanical motion in our products and low noise mixed signal electronics that provides the analog to digital interface to our front-end sensors. Each of these products generally operate in lower power and voltage ranges less than 10kW and 1000V.

What You Will Do

• Design, analyze, simulate, test, and document power conversion (and related analog) circuitry. This circuitry will dominantly involve non-isolated and isolated switch mode power converters and linear converters. Main emphasis is on board-mounted power end use applications.
• Architect at the power system level.
• See circuit card and stack development through its design phases, from requirements definition through initial integration testing. Includes leading large teams and defining schedules and system level tasking for designs.
• Guide ECAD drafters and junior engineers through layout and routing activities. Define layer stackup definitions. Act as an expert regarding creepage and clearance.
• Lead large teams to success with schedule, budget, and technical execution.
• Engage in personal technical growth and facilitate technical growth in peers and junior engineers. Drive the capture of opportunities needed to mature the organization on the technical front.

Qualifications You Must Have

• Bachelor's in Science, Technology, Engineering, or Mathematics (STEM) and 10 years of prior relevant experience
• Design, analysis, test, and/or simulation experience with linear converters, and familiarity with all the following non-isolated converter topologies: buck, boost, buck-boost.
• Professional design, analysis, and simulation experience with at least one of the following isolated converter topologies: flyback, half-bridge, full-bridge, forward, push-pull, resonant.
• Experience with EMI Filter design, transformer or inductor design, analysis, test, and/or simulation considerations in power electronics circuits.
• Analog electronics design, including the following: FETs/BJTs, op-amp, high/low/band pass filters, clock/data termination, and comparator circuits.

Qualifications We Prefer

• Advanced degree in Electrical Engineering
• Understanding of switching converter control techniques and modes such as voltage mode, peak and average current modes, their advantages and disadvantages. Conceptual familiarity and experience must include stability.
• Experience leading large teams (formally or informally), and experience working with other team leads toward a larger goal.
• Exposure to managing customer relationships.
• Experience communicating and documenting technical topics at the small and large team level and experience presenting to upper levels of management.
• Experience conducting trade studies relating to power electronics architecture at the circuit card stack level.
• Experience guiding drafters through the ECAD process, including the layout and routing concerns specific to non-isolated and isolated power electronics.
• Experience Utilizing and creating electrical design specifications. Should have exposure to requirements definition early in the design cycle.
• Experience designing at the power system level to meet concerns of adjacent disciplines, such as thermal, structural, mechanical, reliability, and quality.
• Experience with Texas Instruments C-2000 family of microcontrollers, Microchip PIC controllers, VHDL, or real time operating systems.
• Experience with using CAN-bus, UART, and/or RS-422.

What We Offer

• Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Trust, Respect, Accountability, Collaboration, and Innovation.
• Work Schedule: 9/80 schedule (every other Friday off)
• Relocation Eligibility: This position is eligible for relocation

Learn More & Apply Now!

• Please consider the following role type definition as you apply for this role.
  • Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products.
• This position requires a security clearance. DCSA Consolidated Adjudication Services (DCSA CAS), an agency of the Department of Defense, handles and adjudicates the security clearance process. More information about Security Clearances can be found on the US Department of State government website here: , AZ: ,-az-location

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing St. Louis is building the future ‒ creating innovative solutions that will define the next generation of aerospace. We are currently seeking Experienced or SeniorMechanical System Design Engineers to develop, maintain and modify air vehicle subsystems (Armament, Crew Systems, Environmental Cooling, Equipment, Fuel, Hydraulics, Landing Gear, Mechanisms and Thermodynamic) and component designs, using 3-D Computer Aided Design tools and/or other design methods, to provide product definition to other engineering groups, production operations, suppliers and external customers throughout the product lifecycle.

These positions are located in the St. Louis region and support current and emerging aircraft programs as part of the Air Dominance division in Boeing Defense Space and Security(BDS).

Positions will be located at one of the listed locations: Berkeley, MO; Hazelwood, MO; St. Louis, MO; St. Charles, MO; Mascoutah, IL.

Position Responsibilities:

Level 3

• Develop, integrate and document air vehicle subsystems requirements to establish the system design

• Develop, maintain and modify air vehicle subsystems and component designs, using 3-D Computer Aided Design tools and/or other design methods, to provide product definition to other engineering groups, production operations, suppliers and external customers throughout the product lifecycle

• Perform, integrate analytical and test results to validate and verify systems and components meet requirements and specifications

• Manage supplier development, test and production activities and coordinates with the supplier to optimize the design and achieve program goals

• Develop new design/analysis processes and tools to improve the effectiveness, quality and efficiency of the development effort

• Investigate emerging technologies to develop concepts for future product designs to meet projected requirements

• Work under general direction

Level 4

• Develop, integrate and document air vehicle subsystems requirements to establish the system design

• Develop, maintain and modify air vehicle subsystem and component designs, using 3-D Computer Aided Design tools and/or other design methods, to provide product definition to other engineering groups, production operations, suppliers and external customers throughout the product lifecycle

• Lead performance, integration and analysis of tests to validate and verify systems and components meet requirements and specifications

• Manage supplier development, test and production activities and coordinates with the supplier to optimize the design and achieve program goals

• Assist with investigation of emerging technologies to develop concepts for future product designs to meet projected requirements

• Work under minimal direction

Basic Qualifications (Required Skills / Experience):

• Bachelor of Science degree in Engineering (with a focus on Mechanical, Civil, Aerospace Aeronautical or Material Sciences)

• Level 3: 5 or more years' related work experience or an equivalent combination of technical education and experience

• Level 4: 9 or more years' related work experience or an equivalent combination of technical education and experience

• Experience using NX / Teamcenter and familiarity with reading 2-D drawings

• This position requires the ability to obtain a US Security Clearance for which the US Government requires US Citizenship as a condition of employment. An interim and/or final U.S. Secret Clearance Post-Start is required.

Preferred Qualifications (Desired Skills / Experience):

• Structural Design experience on military or commercial aircraft

Successful candidates for this job must satisfy the Company's Conflict of Interest (COI) assessment process.

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

The Boeing 401(k) helps you save for your future, with contributions from Boeing that can help you grow your retirement savings. Our best-in-class retirement benefit features:

• Best in class 401(k) plan: we'll match your contributions dollar for dollar, up to 10% of eligible pay with Immediate 100% vesting

• Student Loan Match: The Boeing 401(k) Student Loan Match allows eligible enrolled U.S. employees to have their qualified student loan debt payments counted, along with any match-eligible contributions they make, for purposes of determining the Company Match to employees' Boeing 401(k) accounts.

Pay is based upon candidate experience and qualifications, as well as market and business considerations.

Summary Pay Range:

Level 3: $103,700 - $140,300

Level 4: $126,650 - $171,350

Applications for this position will be accepted until Mar. 25, 2026

Education

Bachelor's Degree or Equivalent Required

Relocation

This position offers relocation based on candidate eligibility.

Security Clearance

This position requires the ability to obtain a U.S. Security Clearance for which the U.S. Government requires U.S. Citizenship. An interim and/or final U.S. Secret Clearance Post-Start is required.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for 1st shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing St. Louis is building the future ‒ creating innovative solutions that will define the next generation of aerospace. We are currently seeking Experienced or SeniorStructural Design Engineers to develop, maintain and modify structural and interior payload system and component designs, using 3-D Computer Aided Design tools and/or other design methods, to provide product definition to other engineering groups, production operations, suppliers and external customers throughout the product lifecycle.

These positions are located in the St. Louis region and support current and emerging aircraft programs as part of the Air Dominance division in Boeing Defense Space and Security(BDS).

Positions will be located at one of the listed locations: Berkeley, MO; Hazelwood, MO; St. Louis, MO; St. Charles, MO; Mascoutah, IL.

Position Responsibilities:

Level 3

• Develop, integrate and document structural and interior payload system requirements to establish the system design

• Develop, maintain and modify structural and interior payload system and component designs, using 3-D Computer Aided Design tools and/or other design methods, to provide product definition to other engineering groups, production operations, suppliers and external customers throughout the product lifecycle

• Perform, integrate analytical and test results to validate and verify systems and components meet requirements and specifications

• Manage supplier development, test and production activities and coordinates with the supplier to optimize the design and achieve program goals

• Develop new design/analysis processes and tools to improve the effectiveness, quality and efficiency of the development effort

• Investigate emerging technologies to develop concepts for future product designs to meet projected requirements

• Work under general direction

Level 4

• Develop, integrate and document structural and interior payload system requirements to establish the system design

• Develop, maintain and modify structural and interior payload system and component designs, using 3-D Computer Aided Design tools and/or other design methods, to provide product definition to other engineering groups, production operations, suppliers and external customers throughout the product lifecycle

• Lead performance, integration and analysis of tests to validate and verify systems and components meet requirements and specifications

• Manage supplier development, test and production activities and coordinates with the supplier to optimize the design and achieve program goals

• Assist with investigation of emerging technologies to develop concepts for future product designs to meet projected requirements

• Work under minimal direction

Basic Qualifications (Required Skills / Experience):

• Bachelor of Science degree in Engineering (with a focus on Mechanical, Civil, Aerospace Aeronautical or Material Sciences)

• Level 3: 5 or more years' related work experience or an equivalent combination of technical education and experience

• Level 4: 9 or more years' related work experience or an equivalent combination of technical education and experience

• Experience using NX / Teamcenter and familiarity with reading 2-D drawings

• This position requires the ability to obtain a US Security Clearance for which the US Government requires US Citizenship as a condition of employment. An interim and/or final U.S. Secret Clearance Post-Start is required.

Preferred Qualifications (Desired Skills / Experience):

• Structural Design experience on military or commercial aircraft

Successful candidates for this job must satisfy the Company's Conflict of Interest (COI) assessment process.

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

The Boeing 401(k) helps you save for your future, with contributions from Boeing that can help you grow your retirement savings. Our best-in-class retirement benefit features:

• Best in class 401(k) plan: we'll match your contributions dollar for dollar, up to 10% of eligible pay with Immediate 100% vesting

• Student Loan Match: The Boeing 401(k) Student Loan Match allows eligible enrolled U.S. employees to have their qualified student loan debt payments counted, along with any match-eligible contributions they make, for purposes of determining the Company Match to employees' Boeing 401(k) accounts.

Pay is based upon candidate experience and qualifications, as well as market and business considerations.

Summary Pay Range:

Level 3: $103,700 - $140,300

Level 4: $126,650 - $171,350

Applications for this position will be accepted until Mar. 25, 2026

Education

Bachelor's Degree or Equivalent Required

Relocation

This position offers relocation based on candidate eligibility.

Security Clearance

This position requires the ability to obtain a U.S. Security Clearance for which the U.S. Government requires U.S. Citizenship. An interim and/or final U.S. Secret Clearance Post-Start is required.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for 1st shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Technical Designer

Everett, WA/ Seattle, WA/ Auburn, WA/ Renton, WA/ Portland, OR

Onsite

Technical Designer

- Applies fundamental drafting principles and design concept understanding to support solutions to product/process issues as they occur real-time in the fabrication flow. Create drafted parts and product structures to support operational and quality concerns.

- Performs model definition changes within the defined engineering based on engineering input. Translating the engineer's conceptual ideas and feedback into physical part geometry and assembly definition.

- Engages in cross functional, collaborative environments across the life cycle of the products to support design change and improvement.

- Maintains technical excellence in performing work with career intent to progress into technical designer job role.

- Participate and have the ability to learn in the real-time, fast pace, agile environment with a positive attitude. Work may be first, second, or third shift within a standard or alternate work week; as well as some weekend and/or daily overtime

Position Responsibilities:

- Provides materials and process support to and systems design teams throughout the full life cycle of the airplane from design to production to fleet support. Activities include definition of electrical, electronic, and electromechanical components used across products.

- Reviews electrical component materials and process specifications and other engineering documents used to control design, certify and produce systems hardware.

- Identifying impacts of non-conformances associated with electrical components and corrective/preventative actions for future avoidance.

- Conducts engineering lab / failure analysis to help determine cause and corrective action of failed electrical components

- Leads in evaluation of emerging technologies for potential application to future BCA products enabling a competitive advantage.

- Leads or collaborates with multiple engineering teams, Design, Stress, Quality, Manufacturing, and Suppliers to solve a variety of materials and process challenges throughout the full life cycle of the airplane.

- Produces requirements, specifications and other documents to manage the deployment of tools, equipment, materials, parts and processes used to enhance the full life cycle.

Basic Qualifications:

- Associate degree and typical experience in drafting classification (or combination of education and experience), basic understanding and usage of computer aided design, basic understanding of design product structure (details, parts, assemblies, installations), understanding in machining of metallic parts.

- 9+ years of experience working with aerospace design, including experience working with detail and assembly parts

- CATIA or equivalent solid modeling experience

- Integrated Visualization Tool (IVT) use and experience

Preferred Qualifications:

- Problem solving skills

- Investigative skills

- Multi-tasking skills

- Project management experience working with projects at various stages and coordinating with multiple organizations

* Experience working in lab environments

Education / Experience: AA degree in related discipline and typically 9 or more years of related experience or an equivalent combination of education and experience

Position: Senior Semantic Engineer / Ontology Engineer

Location: East Hanover, NJ (Hybrid - 3x/week onsite)

Duration: 6 Months (extendable)

DESCRIPTION:

We are hiring a Senior Semantic Engineer / Ontology Engineer to lead the design of healthcare-grade ontologies and semantic layers that power trusted analytics, interoperable data products, and AI-ready knowledge systems. You will apply metrics-first semantic modeling and ontology engineering practices aligned to the principles such as clear semantics, reusable meaning, governance-by-design, and measurable business outcomes. You’ll work across RDF and property graph paradigms and Snowflake semantic layer.

Key Responsibilities:

• Design and evolve healthcare ontologies and semantic models to standardize meaning across domains (clinical, patient, provider, claims, access, quality, outcomes).

• Design data products that are AI-ready and leverage ontologies and semantic models

Build metrics-first semantic layers:

• Define canonical metric definitions, dimensions, hierarchies, and calculation rules.

• Ensure metrics are explainable, auditable, and consistently implemented across products and teams.

• Model knowledge in both RDF (RDFS/OWL) for formal semantics and interoperability.

• Property graphs for traversal-heavy use cases and relationship analytics.

Develop and maintain semantic artifacts:

• Concept schemes, entity models, vocabularies, mappings, and documentation.

• Alignment patterns between ontologies, data products, and downstream analytics/AI use cases.

Implement semantic integration patterns:

• Entity identity resolution, entity linking, terminology harmonization, and enrichment workflows.

Partner with platform teams to operationalize semantics in Snowflake:

• Enable semantic access patterns that support analytics and AI applications.

• Contribute to solutions that leverage Snowflake Cortex for semantic enrichment and assisted discovery (within established governance constraints).

Collaborate with governance and architecture stakeholders to embed:

• Versioning, stewardship workflows, quality checks, and change management for semantic assets.

• Guide best practices and mentor engineers/analysts on ontology engineering, graph modeling, and metrics-first design.

Required Qualifications

• 8+ years in semantic engineering, ontology engineering, knowledge graph development, or closely related roles.

• Demonstrated experience in healthcare data domains (payer/provider, clinical, claims, RWE, quality, outcomes, etc.).

• Strong hands-on ontology engineering experience: RDF, RDFS, OWL, SPARQL and/or graph query experience

• Ontology modularization, alignment, and lifecycle management

• Experience with property graph modeling (e.g., Neo4j-style patterns) and translating between RDF and property graph representations when needed.

• Proven delivery of a metrics-first approach:

• Canonical KPIs/metrics definitions, dimensional modeling alignment, semantic consistency across BI and data products.

• Experience working with modern cloud data platforms, especially Snowflake, and exposure to Snowflake Cortex for AI-enabled workflows.

• Strong stakeholder communication skills: able to translate clinical/business intent into precise semantic definitions and usable artifacts.

Preferred Qualifications

• Familiarity with healthcare interoperability and terminology standards (e.g., HL7/FHIR, SNOMED CT, LOINC, ICD-10) and how to map/align them to enterprise semantics.

• Experience with semantic tooling and practices, validation rules, ontology testing, and CI/CD for semantic assets.

• Experience deploying semantic context layers

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing St. Louis is building the future ‒ creating innovative solutions that will define the next generation of aerospace. We are currently seeking Experienced or SeniorMechanical System Design Engineers to develop, maintain and modify air vehicle subsystems (Armament, Crew Systems, Environmental Cooling, Equipment, Fuel, Hydraulics, Landing Gear, Mechanisms and Thermodynamic) and component designs, using 3-D Computer Aided Design tools and/or other design methods, to provide product definition to other engineering groups, production operations, suppliers and external customers throughout the product lifecycle.

These positions are located in the St. Louis region and support current and emerging aircraft programs as part of the Air Dominance division in Boeing Defense Space and Security(BDS).

Positions will be located at one of the listed locations: Berkeley, MO; Hazelwood, MO; St. Louis, MO; St. Charles, MO; Mascoutah, IL.

Position Responsibilities:

Level 3

• Develop, integrate and document air vehicle subsystems requirements to establish the system design
• Develop, maintain and modify air vehicle subsystems and component designs, using 3-D Computer Aided Design tools and/or other design methods, to provide product definition to other engineering groups, production operations, suppliers and external customers throughout the product lifecycle
• Perform, integrate analytical and test results to validate and verify systems and components meet requirements and specifications
• Manage supplier development, test and production activities and coordinates with the supplier to optimize the design and achieve program goals
• Develop new design/analysis processes and tools to improve the effectiveness, quality and efficiency of the development effort
• Investigate emerging technologies to develop concepts for future product designs to meet projected requirements
• Work under general direction

Level 4

• Develop, integrate and document air vehicle subsystems requirements to establish the system design
• Develop, maintain and modify air vehicle subsystem and component designs, using 3-D Computer Aided Design tools and/or other design methods, to provide product definition to other engineering groups, production operations, suppliers and external customers throughout the product lifecycle
• Lead performance, integration and analysis of tests to validate and verify systems and components meet requirements and specifications
• Manage supplier development, test and production activities and coordinates with the supplier to optimize the design and achieve program goals
• Assist with investigation of emerging technologies to develop concepts for future product designs to meet projected requirements
• Work under minimal direction

Basic Qualifications (Required Skills / Experience):

• Bachelor of Science degree in Engineering (with a focus on Mechanical, Civil, Aerospace Aeronautical or Material Sciences)
• Level 3: 5 or more years' related work experience or an equivalent combination of technical education and experience
• Level 4: 9 or more years' related work experience or an equivalent combination of technical education and experience
• Experience using NX / Teamcenter and familiarity with reading 2-D drawings
• This position requires the ability to obtain a US Security Clearance for which the US Government requires US Citizenship as a condition of employment. An interim and/or final U.S. Secret Clearance Post-Start is required.

Preferred Qualifications (Desired Skills / Experience):

• Structural Design experience on military or commercial aircraft

Successful candidates for this job must satisfy the Company's Conflict of Interest (COI) assessment process.

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

The Boeing 401(k) helps you save for your future, with contributions from Boeing that can help you grow your retirement savings. Our best-in-class retirement benefit features:

• Best in class 401(k) plan: we'll match your contributions dollar for dollar, up to 10% of eligible pay with Immediate 100% vesting
• Student Loan Match: The Boeing 401(k) Student Loan Match allows eligible enrolled U.S. employees to have their qualified student loan debt payments counted, along with any match-eligible contributions they make, for purposes of determining the Company Match to employees' Boeing 401(k) accounts.

Pay is based upon candidate experience and qualifications, as well as market and business considerations.

Summary Pay Range:

Level 3: $103,700 - $140,300

Level 4: $126,650 - $171,350

Applications for this position will be accepted until Mar. 25, 2026

Education

Bachelor's Degree or Equivalent Required

Relocation

This position offers relocation based on candidate eligibility.

Security Clearance

This position requires the ability to obtain a U.S. Security Clearance for which the U.S. Government requires U.S. Citizenship. An interim and/or final U.S. Secret Clearance Post-Start is required.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for 1st shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing St. Louis is building the future ‒ creating innovative solutions that will define the next generation of aerospace. We are currently seeking Experienced or SeniorStructural Design Engineers to develop, maintain and modify structural and interior payload system and component designs, using 3-D Computer Aided Design tools and/or other design methods, to provide product definition to other engineering groups, production operations, suppliers and external customers throughout the product lifecycle.

These positions are located in the St. Louis region and support current and emerging aircraft programs as part of the Air Dominance division in Boeing Defense Space and Security(BDS).

Positions will be located at one of the listed locations: Berkeley, MO; Hazelwood, MO; St. Louis, MO; St. Charles, MO; Mascoutah, IL.

Position Responsibilities:

Level 3

• Develop, integrate and document structural and interior payload system requirements to establish the system design
• Develop, maintain and modify structural and interior payload system and component designs, using 3-D Computer Aided Design tools and/or other design methods, to provide product definition to other engineering groups, production operations, suppliers and external customers throughout the product lifecycle
• Perform, integrate analytical and test results to validate and verify systems and components meet requirements and specifications
• Manage supplier development, test and production activities and coordinates with the supplier to optimize the design and achieve program goals
• Develop new design/analysis processes and tools to improve the effectiveness, quality and efficiency of the development effort
• Investigate emerging technologies to develop concepts for future product designs to meet projected requirements
• Work under general direction

Level 4

• Develop, integrate and document structural and interior payload system requirements to establish the system design
• Develop, maintain and modify structural and interior payload system and component designs, using 3-D Computer Aided Design tools and/or other design methods, to provide product definition to other engineering groups, production operations, suppliers and external customers throughout the product lifecycle
• Lead performance, integration and analysis of tests to validate and verify systems and components meet requirements and specifications
• Manage supplier development, test and production activities and coordinates with the supplier to optimize the design and achieve program goals
• Assist with investigation of emerging technologies to develop concepts for future product designs to meet projected requirements
• Work under minimal direction

Basic Qualifications (Required Skills / Experience):

• Bachelor of Science degree in Engineering (with a focus on Mechanical, Civil, Aerospace Aeronautical or Material Sciences)
• Level 3: 5 or more years' related work experience or an equivalent combination of technical education and experience
• Level 4: 9 or more years' related work experience or an equivalent combination of technical education and experience
• Experience using NX / Teamcenter and familiarity with reading 2-D drawings
• This position requires the ability to obtain a US Security Clearance for which the US Government requires US Citizenship as a condition of employment. An interim and/or final U.S. Secret Clearance Post-Start is required.

Preferred Qualifications (Desired Skills / Experience):

• Structural Design experience on military or commercial aircraft

Successful candidates for this job must satisfy the Company's Conflict of Interest (COI) assessment process.

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

The Boeing 401(k) helps you save for your future, with contributions from Boeing that can help you grow your retirement savings. Our best-in-class retirement benefit features:

• Best in class 401(k) plan: we'll match your contributions dollar for dollar, up to 10% of eligible pay with Immediate 100% vesting
• Student Loan Match: The Boeing 401(k) Student Loan Match allows eligible enrolled U.S. employees to have their qualified student loan debt payments counted, along with any match-eligible contributions they make, for purposes of determining the Company Match to employees' Boeing 401(k) accounts.

Pay is based upon candidate experience and qualifications, as well as market and business considerations.

Summary Pay Range:

Level 3: $103,700 - $140,300

Level 4: $126,650 - $171,350

Applications for this position will be accepted until Mar. 25, 2026

Education

Bachelor's Degree or Equivalent Required

Relocation

This position offers relocation based on candidate eligibility.

Security Clearance

This position requires the ability to obtain a U.S. Security Clearance for which the U.S. Government requires U.S. Citizenship. An interim and/or final U.S. Secret Clearance Post-Start is required.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for 1st shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing St. Louis is building the future ‒ creating innovative solutions that will define the next generation of aerospace. We are currently seeking Experienced or SeniorStructural Design Engineers to develop, maintain and modify structural and interior payload system and component designs, using 3-D Computer Aided Design tools and/or other design methods, to provide product definition to other engineering groups, production operations, suppliers and external customers throughout the product lifecycle.

These positions are located in the St. Louis region and support current and emerging aircraft programs as part of the Air Dominance division in Boeing Defense Space and Security(BDS).

Positions will be located at one of the listed locations: Berkeley, MO; Hazelwood, MO; St. Louis, MO; St. Charles, MO; Mascoutah, IL.

Position Responsibilities:

Level 3

• Develop, integrate and document structural and interior payload system requirements to establish the system design
• Develop, maintain and modify structural and interior payload system and component designs, using 3-D Computer Aided Design tools and/or other design methods, to provide product definition to other engineering groups, production operations, suppliers and external customers throughout the product lifecycle
• Perform, integrate analytical and test results to validate and verify systems and components meet requirements and specifications
• Manage supplier development, test and production activities and coordinates with the supplier to optimize the design and achieve program goals
• Develop new design/analysis processes and tools to improve the effectiveness, quality and efficiency of the development effort
• Investigate emerging technologies to develop concepts for future product designs to meet projected requirements
• Work under general direction

Level 4

• Develop, integrate and document structural and interior payload system requirements to establish the system design
• Develop, maintain and modify structural and interior payload system and component designs, using 3-D Computer Aided Design tools and/or other design methods, to provide product definition to other engineering groups, production operations, suppliers and external customers throughout the product lifecycle
• Lead performance, integration and analysis of tests to validate and verify systems and components meet requirements and specifications
• Manage supplier development, test and production activities and coordinates with the supplier to optimize the design and achieve program goals
• Assist with investigation of emerging technologies to develop concepts for future product designs to meet projected requirements
• Work under minimal direction

Basic Qualifications (Required Skills / Experience):

• Bachelor of Science degree in Engineering (with a focus on Mechanical, Civil, Aerospace Aeronautical or Material Sciences)
• Level 3: 5 or more years' related work experience or an equivalent combination of technical education and experience
• Level 4: 9 or more years' related work experience or an equivalent combination of technical education and experience
• Experience using NX / Teamcenter and familiarity with reading 2-D drawings
• This position requires the ability to obtain a US Security Clearance for which the US Government requires US Citizenship as a condition of employment. An interim and/or final U.S. Secret Clearance Post-Start is required.

Preferred Qualifications (Desired Skills / Experience):

• Structural Design experience on military or commercial aircraft

Successful candidates for this job must satisfy the Company's Conflict of Interest (COI) assessment process.

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

The Boeing 401(k) helps you save for your future, with contributions from Boeing that can help you grow your retirement savings. Our best-in-class retirement benefit features:

• Best in class 401(k) plan: we'll match your contributions dollar for dollar, up to 10% of eligible pay with Immediate 100% vesting
• Student Loan Match: The Boeing 401(k) Student Loan Match allows eligible enrolled U.S. employees to have their qualified student loan debt payments counted, along with any match-eligible contributions they make, for purposes of determining the Company Match to employees' Boeing 401(k) accounts.

Pay is based upon candidate experience and qualifications, as well as market and business considerations.

Summary Pay Range:

Level 3: $103,700 - $140,300

Level 4: $126,650 - $171,350

Applications for this position will be accepted until Mar. 25, 2026

Education

Bachelor's Degree or Equivalent Required

Relocation

This position offers relocation based on candidate eligibility.

Security Clearance

This position requires the ability to obtain a U.S. Security Clearance for which the U.S. Government requires U.S. Citizenship. An interim and/or final U.S. Secret Clearance Post-Start is required.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for 1st shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing St. Louis is building the future ‒ creating innovative solutions that will define the next generation of aerospace. We are currently seeking Experienced or SeniorMechanical System Design Engineers to develop, maintain and modify air vehicle subsystems (Armament, Crew Systems, Environmental Cooling, Equipment, Fuel, Hydraulics, Landing Gear, Mechanisms and Thermodynamic) and component designs, using 3-D Computer Aided Design tools and/or other design methods, to provide product definition to other engineering groups, production operations, suppliers and external customers throughout the product lifecycle.

These positions are located in the St. Louis region and support current and emerging aircraft programs as part of the Air Dominance division in Boeing Defense Space and Security(BDS).

Positions will be located at one of the listed locations: Berkeley, MO; Hazelwood, MO; St. Louis, MO; St. Charles, MO; Mascoutah, IL.

Position Responsibilities:

Level 3

• Develop, integrate and document air vehicle subsystems requirements to establish the system design
• Develop, maintain and modify air vehicle subsystems and component designs, using 3-D Computer Aided Design tools and/or other design methods, to provide product definition to other engineering groups, production operations, suppliers and external customers throughout the product lifecycle
• Perform, integrate analytical and test results to validate and verify systems and components meet requirements and specifications
• Manage supplier development, test and production activities and coordinates with the supplier to optimize the design and achieve program goals
• Develop new design/analysis processes and tools to improve the effectiveness, quality and efficiency of the development effort
• Investigate emerging technologies to develop concepts for future product designs to meet projected requirements
• Work under general direction

Level 4

• Develop, integrate and document air vehicle subsystems requirements to establish the system design
• Develop, maintain and modify air vehicle subsystem and component designs, using 3-D Computer Aided Design tools and/or other design methods, to provide product definition to other engineering groups, production operations, suppliers and external customers throughout the product lifecycle
• Lead performance, integration and analysis of tests to validate and verify systems and components meet requirements and specifications
• Manage supplier development, test and production activities and coordinates with the supplier to optimize the design and achieve program goals
• Assist with investigation of emerging technologies to develop concepts for future product designs to meet projected requirements
• Work under minimal direction

Basic Qualifications (Required Skills / Experience):

• Bachelor of Science degree in Engineering (with a focus on Mechanical, Civil, Aerospace Aeronautical or Material Sciences)
• Level 3: 5 or more years' related work experience or an equivalent combination of technical education and experience
• Level 4: 9 or more years' related work experience or an equivalent combination of technical education and experience
• Experience using NX / Teamcenter and familiarity with reading 2-D drawings
• This position requires the ability to obtain a US Security Clearance for which the US Government requires US Citizenship as a condition of employment. An interim and/or final U.S. Secret Clearance Post-Start is required.

Preferred Qualifications (Desired Skills / Experience):

• Structural Design experience on military or commercial aircraft

Successful candidates for this job must satisfy the Company's Conflict of Interest (COI) assessment process.

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

The Boeing 401(k) helps you save for your future, with contributions from Boeing that can help you grow your retirement savings. Our best-in-class retirement benefit features:

• Best in class 401(k) plan: we'll match your contributions dollar for dollar, up to 10% of eligible pay with Immediate 100% vesting
• Student Loan Match: The Boeing 401(k) Student Loan Match allows eligible enrolled U.S. employees to have their qualified student loan debt payments counted, along with any match-eligible contributions they make, for purposes of determining the Company Match to employees' Boeing 401(k) accounts.

Pay is based upon candidate experience and qualifications, as well as market and business considerations.

Summary Pay Range:

Level 3: $103,700 - $140,300

Level 4: $126,650 - $171,350

Applications for this position will be accepted until Mar. 25, 2026

Education

Bachelor's Degree or Equivalent Required

Relocation

This position offers relocation based on candidate eligibility.

Security Clearance

This position requires the ability to obtain a U.S. Security Clearance for which the U.S. Government requires U.S. Citizenship. An interim and/or final U.S. Secret Clearance Post-Start is required.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for 1st shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

At Rite-Hite, your work makes an impact. As the global leader in loading dock and door equipment, we design and deliver solutions that keep our customers safe, secure, and productive. Here, you'll find innovation, stability, and the chance to grow your career as part of a team that's always looking ahead.

PURPOSE.

Under direction of the Warehouse and Logistics Manager, this position is responsible for the monitoring and accuracy of all RiteHite Warehouse inventory. This position will also aid in establishing the Warehouse Ready initiative.

ESSENTIAL DUTIES AND RESPONSIBILITIES include the following- Other duties may be assigned

Generate cycle count reports, summarizing cycle results by part number, by location and by facility.

This position will have indirect authority to assign personnel to count.

This position will have direct authority to train warehouse personnel, and provide feedback on improvements, as needed.

Entering of all cycle counts and reconciling inventory adjustments with appointed Opco representatives (planners, buyers, supervisors and operations leadership in a timely fashion.

Communicate errors or process breakdowns in real time and coordinate efforts to resolve issues regarding inventory controls or practices-

Propose and implement inventory processes as needed, with accompanied support documentation-

Investigate cycle adjustments that exceed a predetermined tolerance level and report and document any findings to appropriate personnel.

Maintain Stock-Out Repon integrity and work with appropriate personnel to reconcile BOM errors-

Work with all OPCO personnel (buyers, planners, supervisors and ops leadership) to establish shelf allocation, replenish quantities and delivery frequencies.

Maintain regular communication with purchasing, planning, engineering and manufacturing to ensure inventory processes are followed and inconsistencies are identified.

Work with appropriate production support personnel to identify reasons for inventory over-issues, communicate and coordinate corrections as needed-

Develop and maintain accurate documentation of Warehouse inventory procedures and processes-

Facilitate the engagement of manufacturing personnel, support personnel and engineering personnel in how they affect the overall inventory process-

Perform cycle counts-

Motivate manufacturing personnel by soliciting input in developing inventory benchmarks and goals that are consistent with the company's strategic plan-

Assist in development and initiation of the warehouse ready initiative-

PRINCIPLE ACCOUNTABILITIES:

Timeliness and accuracy of cycle counts and inventory practices-

Professional and effective communications with manufacturing, support, engineering and management personnel of inventory processes and/or issues.

Document inventory measurements and processes in accordance with company procedure.

Ability to effectively engage other personnel in understanding inventory and its processes-

Capable of communicating and engaging personnel at various inventory skill levels-

QUALIFICATIONS-

This individual will need to be proficient in Excel spreadsheet and Word documents. Experience in JDE El will be helpful.

EDUCATION and/or EXPERIENCE-

Associate's degree (A. A.) or equivalent from a 2 year college or technical school; or 3-5 years related experience and/or training; or equivalent combination of education and experience-

LANGUAGE SKILLS-

Ability to read and comprehend simple instructions, shot correspondence, and memos- Ability to write simple correspondence. Ability to effectively present information in one-on-one and small group situations to customers, clients, and other employees of the organization-

MATHEMATICAL SKILLS:

Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent and to draw and interpret bar graphs-

REASONING ABILITY:

Ability to apply reasoning and troubleshoot processes to identify flaws. Understanding of 5 Why methodology along with other six sigma or process improvement tools preferred Possess ability to deal with standardized situations with only occasional or no variables-

CERTIFICATES'LICENSES/REGISTRATIONS:

APICS Certification preferred but not required.

PHYSICAL DEMANDS:

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job- Reasonable accommodations may be made to enable individuals with disabilities to pefform the essential functions. The employee will frequently use a scissor lift to heights of 25 feet

While performing the duties of this job, the employee is regularly required to tak or hear. The employee frequently is required to use hands to finger, handle, or feel- The employee is occasionally required to stand, walk, and sit- The employee must occasionally lift and/or move up to 25 pounds- Specific vision abilities required by this job include close vision, and ability to adjust focus.

INFORMATION ABOUT THE PHYSICAL ASPECTS OF THE EMPLOYEE'S JOB

Check he items below that relate to the employee's job and complete the information requested. use these definitions for the frequency of occurrence.

Occasionally means the person does the activity up to 33% of the timeFrequency means the person does the activity 34% to 66% of the time.

Continually means the person does the activity 67% to 100% of the time-

What We Offer

At Rite-Hite, we take care of our people - because when you're supported, you can do your best work. Our benefits are designed to support your health, your future and your life outside of work:

• Health & Well-being: Comprehensive medical, dental, and vision coverage, plus life and disability insurance. A robust well-being program with an opportunity to receive an extra day off and more.

• Financial Security: A strong retirement savings program with 401(k), company match, and profit sharing.

• Time for You: Paid holidays, vacation time, and personal/sick days each year.

Join us and build a career where you're supported - at work and beyond.

Rite-Hite is proud to be an Equal Opportunity Employer. We consider all qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, veteran status, or any other protected characteristic under federal, state, or local law.In accordance with VEVRAA, we are committed to providing equal employment opportunities for protected veterans.We are also committed to maintaining a drug-free workplace for the safety of our employees and customers.