Logic Project Alternatives Jobs in Usa

Construction Manager (WV - Civil Power Project)

Plan, direct, coordinate, or budget, usually through subordinate supervisory personnel, activities concerned with the construction and maintenance of structures, facilities, and systems. Participate in the conceptual development of a construction project and oversee its organization, scheduling, and implementation.

• Bachelor’s degree from an accredited college or university and 15 years’ related experience and/or training; or equivalent combination of education and experience
• Demonstrated ability to perform on progressively more complex projects
• Power project experience

JOB DUTIES AND TASKS:

• Schedule the project in logical steps and budget time required to meet deadlines.
• Determine labor requirements and dispatch workers to construction sites.
• Inspect and review projects to monitor compliance with building and safety codes, and other regulations.
• Interpret and explain plans and contract terms to administrative staff, workers, and clients, representing the owner or developer.
• Prepare contracts and negotiate revisions, changes and additions to contractual agreements with architects, consultants, clients, suppliers and subcontractors.
• Obtain all necessary permits and licenses. Direct and supervise workers.
• Study job specifications to determine appropriate construction methods.

• Develop and implement quality control programs.
• Take actions to deal with the results of delays, bad weather, or emergencies at construction site.
• Confer with supervisory personnel, owners, contractors, and design professionals to discuss and resolve matters such as work procedures, complaints, and construction problems.
• Plan, organize, and direct activities concerned with the construction and maintenance of structures, facilities, and systems.
• Investigate damage, accidents, or delays at construction sites, to ensure that proper procedures are being carried out.
• Evaluate construction methods and determine cost-effectiveness of plans, using computers.
• Direct acquisition of land for construction projects.

Must Haves:

• Bachelor of Science degree in Environmental Science, Engineering, Biology, Geology, or Earth Sciences
• Professional license, professional registration, and/or certification (PE, PG, CHMM, CSP, CIH, etc.)
• 15+ years of environmental services and both personnel and client management experience
• Demonstrated experience working in a highly collaborative, team-based environment
• Strong oral and written communications skills with experience in client coordination and communications
• Ability to manage direct work and work by others against schedules and established budgets

Plusses:

• Experience with telecommunications or communications-infrastructure projects.
• Experience managing or supporting projects exceeding $50M.
• Knowledge of scheduling and proficiency with Primavera P6.
• Project Management Professional (PMP) certification.

D2D:

As a Senior Manager, you will identify and deliver multi-discipline projects/tasks supporting public and private-sector client projects.

• Direct, lead, and implement concurrent environmental services projects/tasks
• Assist in identifying and capturing work for requiring environmental services
• Possess a firm understanding of governing Federal and State regulations, standards, and guidance such as OSHA, ASTM standards, state DOT clearances/permits, etc.
• Assess and interpret data, analyzes, reports/communicates alternatives and potential impacts to colleagues, clients, and stakeholders
• Develop project budgets and track various metrics
• Collaborate with others to prepare technical reports/memoranda offering solutions to client projects
• Serve as liaison between clients and firm
• Manage and mentor staff throughout our organization
• Participate in group planning, budgeting, and strategic planning
• Lead/participate in proposal and marketing efforts and client management

Come Build Your Career at Aecon!

As a North American leader in infrastructure development, Aecon is safely and sustainably building what matters for future generations to thrive! We lead some of the most impactful infrastructure projects of our generation, at the forefront of transformational change in transportation and energy, and partnering every day to build, connect, power, and strengthen our communities.

At Aecon, you can count on:

• Safety Always. Our number one core value. If we can’t do it safely, we don’t do it at all.
• Integrity. We lead by example, with humility and courage.
• Accountability. We’re passionate about delivering on our commitments.
• Inclusion. We provide equitable opportunities for everyone.

We lead the infrastructure industry with purpose, and our people are at the heart of everything we do. So, we invest in our people, just like they invest in us!

At Aecon we:

• Ensure you and your family receive the services needed to support your mental, emotional, and physical well-being.
• Believe in helping you build your career through our Aecon University and Leadership Programs.
• Are committed to supporting and investing in inclusive work environments, through initiatives like Diversity, Equity, Inclusion, & Accessibility training, our Aecon Women in Trades and Aecon Diversity in Trades programs, and our Employee Resource Groups (ERGs) to ensure we are building inclusion into every aspect of our culture at Aecon.
• Are a leader in sustainable construction. With a strong commitment to operating responsibly by minimizing our impact on the environment and surrounding communities.

Our business success relies on strong execution and continuous improvement – driven by the diversity, expertise and teamwork of our people. We’re always searching the globe for innovative, collaborative minds to join our best-in-class Aecon community!

What is the Opportunity?

Aecon Industrial Construction Corp leads the way in industrial construction and water infrastructure, providing clients in Canada and the U.S. with vertically integrated solutions and exceptional execution.

Aecon Allegiant is currently seeking Project Coordinator (Intern or Full-Time) candidates to support our team on the Samsung Semiconductor Facility in Taylor, Texas - one of the most advanced and high profile construction projects in the United States. We are interested in candidates with strong technical skills, data management abilities, and engineering or construction experience.

We are looking for a detail oriented, digitally driven Project Coordinator who excels in fast paced, data-centric environments. The role focuses heavily on building advanced Excel/database-style tracking tools, assisting with cost and quantity management, and supporting workflow automation. Individuals with engineering or construction experience are encouraged to apply.

What You'll Do Here:

• Technical Data Systems: Develop and maintain advanced Excel-based databases, dashboards, and automated tracking tools.
• Cost Control & Documentation: Track budgets, maintain cost logs, compare actuals, and support invoice/PO processing.
• Scheduling Support: Assist in monitoring and updating project schedules using available scheduling tools (excluding Microsoft Project), with emphasis on identifying conflicts and communicating impacts.
• Field–office Coordination: Act as a communication link between field teams, subcontractors, and vendors to ensure timely information flow.
• Reporting: Prepare daily logs, weekly progress summaries, and monthly financial reports for project leadership.

What You Bring to the Team:

• Excel (High Proficiency): Pivot tables, VLOOKUP/XLOOKUP, INDEX-MATCH, nested formulas, conditional logic, and large-data handling.
• Scheduling Tools: Experience supporting schedules; Primavera P6 familiarity is an asset.
• Document Tools: Strong proficiency with Bluebeam Revu for drawing markups and reviews.
• Construction Processes: Understanding of RFIs, submittals, drawings, and construction sequencing.
• Preferred additional skills: Power BI, Python or VBA scripting, SQL/database experience, and Engineering or construction experience encouraged

Aecon fosters diversity, inclusion and belonging within and across our organization. We consider all applicants for positions without regard to race, color, religion, sex, national origin, age, mental or physical disabilities, veteran status, and all other characteristics protected by law.

We are committed to adhering to the objectives and requirements outlined in the Equal Employment Opportunity Commission (EEOC), and to meeting the accessibility needs of persons with disabilities in a timely manner, through the implementation of the requirements of the EEOC and its applicable regulations. Appropriate accommodation under the EEOC will be provided upon request throughout the interview and hiring process.

Our client is a well-established, family-owned heavy civil contractor serving the Carolinas and Southeast. They are seeking an experienced and detail-oriented Project Estimator to support preconstruction efforts for Heavy-Highway Sitework projects. This role is responsible for developing accurate and competitive cost estimates, analyzing project risks, and collaborating with internal teams and external partners to ensure successful bid submissions and project planning.

Essential Duties & Functions:

• Analyze and interpret contract documents including engineering plans, specifications and geotechnical reports.
• Prepare detailed cost estimates using HCSS software.
• Perform quantity take-off analysis utilizing AGTEK.
• Solicit and analyze supplier and subcontractor proposals.
• Develop and maintain strong relationships with clients, architects, subcontractors, and vendors
• Attend jobsite walkthroughs and pre-bid meetings as necessary.
• Prepare preliminary project schedules.
• Prepare risk assessment analysis.
• Work in a team environment, assisting and coordinating with other estimators.
• Ensure that accurate and complete estimates of project are prepared on time, in a professional and competitive manner.
• Interface professionally with clients.
• Additional responsibilities as directed by Chief Operations Officer.

Qualifications:

• Minimum of 4 years of Estimating experience in Heavy Civil earthwork projects desired.
• Possess strong mathematical and computer skills with proficiency in HCSS HeavyBid or similar estimating software, AGTEK. Auto-CAD and Trimble Business Center a plus.
• Demonstrate proficiency with Microsoft Office products, particularly Microsoft Excel.
• Experienced in preparing hard-bid public and private market cost proposals.
• Bachelor's Degree in Civil Engineering, Construction Management, Civil Construction, or Building Science or equivalent combination of education and experience.
• Excellent verbal and written communication skills, and the ability to work within a team environment.
• Demonstrate the ability to work well under pressure, especially when facing bid deadlines.
• Can understand and orate the construction process and sequencing utilized in building the estimate
• Using logic and reasoning to identify the strengths and weaknesses of alternative solutions, conclusions or approaches to problems.
• Identifying complex problems and reviewing related information to develop and evaluate options and implement solutions.
• Considering the relative costs and benefits of potential actions to choose the most appropriate one.

For confidential consideration, please email or apply directly!

Forge Search is built on a foundation of strong relationships, dedicated to helping clients find the essential talent needed to drive their business forward and ensure seamless operations.

Power the data centers, hospitals, and other mission-critical facilities of tomorrow-designing both rugged rental products and stationary generator-set packages that keep them online. As an Electrical Project Engineer, you'll work in a unique manufacturing and dealer environment, leveraging expert-level AutoCAD and Inventor skills to craft low- and medium-voltage AC layouts, DC controls, and the logic that ties multiple gensets into advanced paralleling switchgear and smart control panels. Juggle multiple high-impact projects, troubleshoot in the test cell, and serve as the go-to authority for production teams and customers alike-making an outsized impact alongside a collaborative squad of engineers, sales pros, and suppliers.

• Produce comprehensive wiring schematics, conduit schedules, and panel layouts in AutoCAD and Inventor for diesel and natural gas gensets, ensuring every reference, layer, and legend is unambiguous.

• Size and specify breakers, relays, PLC/HMI hardware, and interface circuits that integrate seamlessly with low to medium-voltage paralleling switchgear and DC control systems.

• Audit project drawings, vendor prints, and specifications against UL, NFPA 70/110, ISO, and customer standards; log variances and close them before release.

• Diagnose elusive startup, commissioning, and controls problems for technicians through root-cause-based recommendations that feed back into design libraries to improve the product.

• Translate application questions into concise recommendations and solutions and document in formal engineering notes.

• Maintain production continuity
  • Follow standard protocols and proven design protocols to ensure consistent high-quality products that meet or exceed customer requirements.
• Manage the submittal dossier
  • Assemble, index, and track all drawings, studies, and data sheets through the approval cycle; document every revision for full traceability.
• Leverage Caterpillar engineering resources
  • Retrieve and interpret factory application guides, PID data, and software updates; ensure the latest revisions are embedded in each project.
• Enable precise estimating
  • Deliver dimensioned one-lines, BOMs, and labor take-offs to the Sales team so quotes reflect real scope, margin, and risk.
• Design for the exceptional case
  • Apply first-principles analysis to bespoke components or control sequences required by unique site conditions or regulatory environments.
• Control the critical path
  • Use tools and milestone checklists to keep engineering actions on time, document slippage causes, and propose corrective actions proactively.
• Adapt as requirements evolve
  • When priorities shift, re-baseline drawings, calculations, designs, and priorities so the entire team works from a single source of truth.

If precision, thorough documentation, and methodical problem-solving are how you create value, this role will let you practice your craft at a high level of electrical engineering discipline.

Education & Experience

• B.S. in Electrical Engineering (preferred) - or at least ten years of hands-on experience in the engine-driven power-generation industry or a closely related technology field with design engineering experience for 5+ years.
• Military veterans are strongly encouraged to apply.

Technical Expertise

• Proficiency with Caterpillar toolsets (CAT ET, CAT Monitoring Software, SIS Web, TMI, EDDC) is highly desirable.
• Working knowledge of diesel- and natural-gas generator sets is preferred; familiarity with lithium-ion energy-storage systems is a plus.
• Thorough understanding of relevant codes and standards-NFPA 70/110, NEC, NEMA, UL, IEEE.
• Expert-level 2D drafting in AutoCAD; 3D modeling experience required (Inventor preferred, or comparable platforms accepted).
• Exposure to generator paralleling switchgear, remote-fuel supply, and remote-cooling systems is preferred.

Other Requirements

• Valid driver's license with a clean record (no more than two minor violations in the last three years and no major violations in the last five years). A motor vehicle driving record check will be conducted for the final candidate.

Altorfer Inc. offers an industry leading compensation and benefit package:

* Health, Dental, Vision, Disability, and Life Insurance
* 401(k)
* Paid Holidays
* Paid Parental Leave and Funeral Leave
* Paid Time Off: Prorated 80 hours of PTO + 1 Floating Holiday
* Education Assistance
* Personal Tool Insurance, and Safety Equipment Reimbursement
* Voluntary Benefits: Supplemental Insurance, Accident, Critical and Hospital Indemnity Insurance, Legal Assistance and Identity & Fraud Protection

Salary Range: $60K to $120K annually

Work is normally performed both indoors and outdoors with moderate noise conditions. Limited exposure to all weather conditions is associated with this position. Physical requirements may include speaking, listening, writing, typing, reaching, pushing, pulling, lifting, carrying, sitting for extended periods, and managing stress. Occasionally required to walk or stand for short durations on manufacturing floors or job sites. Job hazards may include tripping, slipping, falling, jobsite hazards, hand injuries, driving related hazards, equipment movement, overexertion due to stress and fatigue. Required to follow all safety protocols and wear appropriate personal protective equipment depending on the environment or location. The noise level in the work environment is usually moderate to high. The noise level in the office environment is usually moderate to low. Must be flexible to work varying schedules and hours as needed. Occasional travel may be required. The physical demands described above are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

Why Work for Altorfer?

At Altorfer, our iron is just the beginning. Our people make our company successful, and we would not be who we are without them. As a third-generation, family-owned company created in 1957, we bring our values into how we do business. Everyone from technicians, sales representatives, administrative professionals, or somewhere in between is part of the "A-Team" and is critical to our success. Here at Altorfer, we have over 35 locations and 1300 employees with long tenure for you to learn from. We have a collaborative, family-valued culture, with a great reputation in the industry. A company that offers competitive pay, excellent benefits, and a remarkable team of people to work with.

Job Description

Develop fully integrated Engineering, Procurement, Construction, Commissioning logically tied, and resource loaded schedules • Monitor, analyze and report the critical path and overall project performance • Analyze and report on scheduling and project data with an innovative approach leading to actionable outcomes • Create potential “what-if” scenario schedules showing viable alternative paths to achieve project objectives, accelerate or reduce schedule and cost risks • Ensure scheduling tools are progressed and updated weekly with all stakeholders across multiple programs, while providing accurate and meaningful outputs

Required Skills & Experience

3-10 years of scheduling/planning experience on large commercial, industrial, mining, government, or oil & gas construction projects • Project size $100M + • Direct scheduling experience with proficiency in Primavera P6 are required for this role • Proficient Microsoft Excel skills • Power BI experience preferred but not required • Experience in Critical Path Methodology, Earned Value Management with a demonstrated history of successful schedule reporting, compression, and mitigation efforts

Foreman – Environmental Construction & Demolition

Field-Based Role | Environmental Excavation | Grading | Demolition | HAZWOPER | OSHA

We are seeking a hands-on, field-driven Foreman to lead crews across environmental construction and demolition projects. This role is ideal for a strong journeyman leader who thrives in fast-paced environments, values safety, and takes pride in delivering high-quality work on schedule and on budget.

If you have experience in environmental excavation, grading, demolition, asbestos abatement, or system installations, this is an opportunity to lead from the front.

What You’ll Do

• Direct field personnel, subcontractors, equipment, and material flow
• Interpret project drawings and specifications; perform layout and inspection
• Plan and implement weekly and daily schedules
• Determine crew size based on scope and timeline
• Track productivity, quality, and budget performance
• Develop alternate work plans when delays arise
• Enforce site-specific safety programs and conduct daily safety huddles
• Implement QA/QC requirements and submit required documentation
• Identify out-of-scope work and changed conditions
• Coordinate closely with Project Managers, Superintendents, and Client Representatives
• Maintain field payroll records, material tracking, change orders, and progress reports

What We’re Looking For

• 5+ years’ experience as a qualified journeyman in environmental or demolition construction
• Strong background in environmental excavation, grading, demolition, or abatement
• Proven leadership of field crews and subcontractors
• Working knowledge of safety regulations and field compliance
• 40-Hour HAZWOPER (preferred)
• OSHA 30 (preferred)
• Additional safety certifications a plus

Why This Role?

• Leadership position with real autonomy
• Direct client interaction and visible impact
• Opportunity to innovate field processes and improve efficiency
• Strong safety culture and professional standards

If you’re ready to take ownership of the field, lead high-performing crews, and deliver complex environmental projects safely and efficiently — we’d like to connect.

Keywords

Foreman jobs, Environmental Foreman, Construction Foreman, Demolition Foreman, Environmental Construction, Site Foreman, Field Supervisor, Environmental Remediation, Earthwork, Grading, Excavation, Asbestos Abatement, Hazardous Materials, HAZWOPER, OSHA 30, OSHA 40, Industrial Demolition, Environmental Compliance, Field Operations, Heavy Civil Construction, Site Safety, Project Field Management, Environmental Contractor, Remediation Projects, Soil Excavation, Underground Utilities

Hello,I work with a plasma donation center in Myrtle Beach, SC.

We have an open position for a Alternate Medical Director to join us.

The Alternate Medical Director would work up to 4 hours a month.

Paid Training provided.

Competitive salary with Malpractice included.

Come and join us in our state of the art facility in Myrtle Beach, SC.

This is a stand-alone Plasmapheresis clinic that needs a Center and Alternate Medical Director to join us to do chart review, lab analysis, and clinic oversight.

Flexible Schedule, Competitive compensation, lifetime CLIA Certification, and Malpractice are all offered.

We are one of the worlds largest makers of plasma products.

We collect human plasma from paid donors to make medicines that are used to treat patients who have immune disorders, shock, burns or low protein levels.

These are just a few of many plasma-based medicines that are possible thanks to our donors.Our mission is to ensure a positive, customer-focused experience for our valued donors and to provide a steady supply of quality plasma to create medicines that change lives.The Medical Director will provide clinic oversight, chart review, and lab analysis.

The schedule is flexible and 30 days in advance for your convenience.

Specific hours and days would be determined between you and the center management team.

Qualifications: Must be licensed to practice medicine in the state of South Carolina.Basic computer skills, Management, leadership, teaching.

I look forward to speaking with you.

Send your CV and contact information along with the best time to reach out to you for a phone call.Nicole AlveyW:

Date Posted:

Country:

Location:

Position Role Type:

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Security Clearance Type:

Security Clearance Status:

At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world. 

This is a Program direct-support position and requires a technical understanding of piece part electronic components and their assembly level applications.  This candidate will transition into a key leadership position in the supporting program Obsolescence Integrated Product Team and will drive issue resolution for situations involving obsolescence.  

The selected candidate will perform and/or assist in the performance of Parts Engineering, Components Engineering or Applications Engineering tasks supporting programs in the Proposal, System Design Description, Low Rate Initial Production, Production and Support phases. Position will require day to day interface with Designers, Contracts, Estimating, Supply Chain, Program Management, and other disciplines. 

 
This position is an onsite role, located in Tucson, AZ.

What You Will Do: 

• Understand and/or generate a program statement of work (SOW) and other defined customer component application requirements. 

• Develop and/or sustain a proactive Obsolescence Management process to deliver cost saving obsolescence mitigation strategies and solutions. 

• Drive resolution through support or execution of lifetime buys, selections of alternate parts, redesign efforts or other mitigation strategies and will facilitate and support contract negotiations, basis of estimates, and supplier statements of work for proposal efforts. 

• Interact with Program and customer leadership on a regular basis to communicate status of mitigation strategies. 

• Conduct trade study analysis help identify cost effective obsolescence driven cut in points for proposed unit redesigns.

Qualifications You Must Have:  

• Typically requires a Bachelor’s in Science, Technology, Engineering, or Mathematics (STEM) and a minimum of 5 years of prior relevant experience with any combination of the following:

• Experience with proactive and reactive component obsolescence management methodologies. 

• Experience with data collection, analysis, and presentation skills to adequately discuss system impact of component obsolescence issues. 

• Experience with project management working with schedules, costs, and integration of stakeholder needs throughout the obsolescence process. 

• Financial and Contract Management experience with proposals, BOE, EVMs, SOWs, CLINs and CDRLs. 

• Experience with BOM (Bill of Material) development and management for developmental and production programs. 

• Risk and Opportunity business case analysis experience supporting sustainment vs redesign cut in decisions. 

Qualifications We Prefer:  

• Master’s Degree in Electrical Engineering or other related science or engineering discipline 

• Ability to navigate multiple complex processes and tools. 

• Understanding of the application of technical theories and concepts as they apply to electronic components and the parts management field. 

• Ability to read and interpret engineering drawings and hierarchy definition. 

• Knowledge of component failure modes by commodity 

• Knowledge of Component MIL drawings, standards, test specifications, and associated QPLs and QMLs 

• Knowledge of component selection, screening, qualification, and derating for use in military, and aerospace flight applications 

• Knowledge of analog design and analysis, general knowledge of digital circuitry and interfaces 

• Excellent communication skills to interface with other Integrated Product Team members, including Electrical Engineering, Mechanical Engineering, Supply Chain Management, Quality, Operations, and Supplier Engineering.  

• Capable of supporting regular customer interactions including but not limited to leadership engagements, responding to proposal requests and contract negotiations. 

• Outstanding organizational, presentation and technical skills. 

• Ability to multi-task and appropriately prioritize responsibilities. 

• Willingness to support occasional travel.  

What We Offer  

Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Trust, Respect, Accountability, Collaboration, and Innovation. 

This position offers relocation based on candidate eligibility.

Learn More & Apply Now!  

This position requires a security clearance. DCSA Consolidated Adjudication Services (DCSA CAS), an agency of the Department of Defense, handles and adjudicates the security clearance process. More information about Security Clearances can be found on the US Department of State government website here:  

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms

Job Category: Nursing

Requisition Number: MEDTE034482

Location: The Palmettos of Bluffton, Bluffton, SC 29909, USA

Job Details

Position: Med Tech Work Schedule: Med Tech 3p-11p Part Time Alternating Weekends Job Type: Part Time

Are you looking to have fun in a work environment where you can express your care and compassions, while making a difference in the lives of others? Come join our team! Palmettos of Bluffton fosters an environment of teamwork and provides opportunities of growth in a healthcare setting. The Med Tech provides direct and indirect patient care activities under the direction of a Registered Nurse or Licensed Practical Nurse. Assists patient with activities of daily living, provides for personal care, comforts and assists in the maintenance of a safe and clean environment for an assigned group of residents. The primary responsibilities of the Medication Technician is to: administer medications to the residents in a safe, accurate and timely manner and provide physical and psychosocial care to all residents in a manner that promotes dignity, choice and individuality.

Position Highlights:

1. Satisfactory completion of medication technician skills competency checklist. 2. Must obtain required medication technician training certificate. 3. Experience working in Assisted Living preferred. 4. Must be able to read, write and speak the English language.

• Understands and practices universal precautions with all patient.
• Performs all tasks/procedures included on assignment or reports to charge nurse any tasks not completed.
• Assists in the preparation for admission of patients.
• Assists in and accompany patients in admission, transfer and discharge procedures.
• Provides post-mortem care.
• Provides morning care, which may include bed bath, oral hygiene, combing hair, back care, dressing patients, changing bed linen, cleaning overbed table and bedside stand, straightening room, and other general care as necessary throughout the day.
• Provides evening care, which includes hands/face washing as needed, oral hygiene, special skin care, freshening linen, cleaning overbed tables, straightening room, and other general care as needed.

Why NHC? Palmettos of Bluffton is pleased to be a part of the NHC (National HealthCare Corporation) family. We offer a culture of recognition, empowerment, and fun. At NHC, we are all partners (employees) in a family oriented work atmosphere where growth and opportunities are promoted. We provide competitive compensation with performance wage rate increases.

Experience - Must be certified nursing assistant or currently enrolled in a nurse aide training program. Attend in-service programs, as assigned, to learn procedures and develop skills and meet state requirements.

Benefits Earned Time Off Holiday Incentive Pay Health, Dental, Vision, Disability and Life insurance Flex Spending Plan 401k with generous company contributions Flexible Schedule Uniforms Advancement Opportunities

Work Location: The Palmettos of Bluffton 3035 Okatie Highway Okatie, SC 29909

If you are interested in working for a leader in senior care and share NHC's values of honesty and integrity, please apply today and find out more about /locations/palmettos-bluffton/

We look forward to talking with you!! EOE